Showing 1–37 of 37 results for author: Kondic, L

Monte-Carlo based model for the extraction of oil from oil-water mixtures using wetting and surface acoustic waves

Authors: Jesús. M. Marcos, Yifan Li, Mark Fasano, Javier A. Diez, Linda J. Cummings, Ofer Manor, Lou Kondic

Abstract: This work presents a Monte Carlo (MC) based microscopic model for simulating the extraction of oil from oil-in-water emulsions under the influence of surface acoustic waves (SAWs). The proposed model is a two-dimensional Ising-lattice gas model that employs Kawasaki dynamics to mimic the interactions between oil, water, and air, as well as external forces such as gravity and acoustic stress. By in… ▽ More This work presents a Monte Carlo (MC) based microscopic model for simulating the extraction of oil from oil-in-water emulsions under the influence of surface acoustic waves (SAWs). The proposed model is a two-dimensional Ising-lattice gas model that employs Kawasaki dynamics to mimic the interactions between oil, water, and air, as well as external forces such as gravity and acoustic stress. By incorporating both acoustic streaming and acoustic radiation pressure, the model captures key experimental observations, including selective oil extraction and droplet motion under SAW excitation. The results highlight the critical role of acoustic radiation pressure in enabling oil film formation and detachment, governed by the balance between capillary and acoustic stresses. The study provides qualitative agreement with experimental findings and offers insights into the essential mechanisms driving acoustowetting-induced phase separation, demonstrating the utility of discrete modeling for complex fluid dynamics problems. △ Less

Submitted 8 April, 2025; originally announced April 2025.

Comments: 13 pages, 8 figures

Using wetting and ultrasonic waves to extract oil from oil/water mixtures

Authors: Yifan Li, Jesus M. Marcos, Mark Fasano, Javier Diez, Linda J. Cummings, Lou Kondic, Ofer Manor

Abstract: Oil and water phases placed on top of a solid surface respond differently to a MHz-level surface acoustic wave (SAW) propagating in the solid due to their different surface tensions and the corresponding capillary stresses. We observe that, under SAW excitation, oil films are extracted continuously from sessile drops of silicone-oil/water/surfactant mixtures. The mechanism responsible for the extr… ▽ More Oil and water phases placed on top of a solid surface respond differently to a MHz-level surface acoustic wave (SAW) propagating in the solid due to their different surface tensions and the corresponding capillary stresses. We observe that, under SAW excitation, oil films are extracted continuously from sessile drops of silicone-oil/water/surfactant mixtures. The mechanism responsible for the extraction of oil from the mixtures is the acoustowetting phenomenon: the low surface tension oil phase leaves the mixture in the form of `fingers' that initially spread over the solid in the direction transverse to that of the SAW. Once away from the drop the oil spreads on the solid surface in the direction opposite that of the SAW, as in classic studies on acoustowetting. The high surface tension water phase remains at rest. Increasing the SAW intensity and oil content in the mixtures enhances the rate at which oil leaves the emulsion. We further observe that the oil film develops free surface instabilities in the form of periodic spatial variations, as well as the formation of spatial gradients in the emulsion concentrations in the presence of SAW. Our study suggests the potential for using SAW to remove oil from oil-in-water mixtures to facilitate the small-scale separation of water and oil phases. Furthermore, we describe the peculiar physical effects leading to acoustic-capillary flow instabilities and SAW-induced emulsion dynamics. △ Less

Submitted 12 February, 2025; originally announced February 2025.

On the fractal dimension of non-Newtonian Hele-Shaw flow subject to Saffman-Taylor instability

Authors: J. Adriazola, B. Gu, L. Cummings, L. Kondic

Abstract: We introduce a discrete numerical method based on the diffusion-limited aggregation (DLA) approach to simulate two-fluid Hele-Shaw flow subject to the Saffman-Taylor interfacial instability, in the case where the displaced fluid is non-Newtonian. Focusing on fluids for which the most relevant non-Newtonian aspect of the thin-gap flow is shear-thinning, we introduce a history-dependent aspect into… ▽ More We introduce a discrete numerical method based on the diffusion-limited aggregation (DLA) approach to simulate two-fluid Hele-Shaw flow subject to the Saffman-Taylor interfacial instability, in the case where the displaced fluid is non-Newtonian. Focusing on fluids for which the most relevant non-Newtonian aspect of the thin-gap flow is shear-thinning, we introduce a history-dependent aspect into the algorithm, modeling shear-rate-dependent fluid viscosity. The main finding is that the morphology of the emerging patterns, characterized by the fractal dimension, is modified in a nontrivial manner by the shear-thinning nature of the displaced fluid. In particular, we consistently find that shear-thinning leads to the formation of patterns characterized by a smaller fractal dimension, compared to the corresponding Newtonian fluid. △ Less

Submitted 12 November, 2024; v1 submitted 8 July, 2024; originally announced July 2024.

Dynamics of a millimeter size drop exposed to MHz-frequency surface acoustic wave in the underlying solid substrate

Authors: Y. Li, J. A. Diez, J. D'Addesa, O. Manor, L. J. Cummings, L. Kondic

Abstract: We present an experimental, theoretical, and computational study of the spreading of a millimetric silicon oil drop under the excitation of a surface acoustic wave (SAW), traveling in the underlying solid substrate. Our theoretical model, formulated within the long wave approach, dynamically captures the interplay between fluid dynamics and acoustic driving forces, emphasizing Eckart streaming as… ▽ More We present an experimental, theoretical, and computational study of the spreading of a millimetric silicon oil drop under the excitation of a surface acoustic wave (SAW), traveling in the underlying solid substrate. Our theoretical model, formulated within the long wave approach, dynamically captures the interplay between fluid dynamics and acoustic driving forces, emphasizing Eckart streaming as the dominant mechanism over Schlichting and Rayleigh streaming due to drop thickness. Following an initial deformation phase to accommodate acoustic stress, the drop accelerates to a sustained translation at nearly constant speed, leaving behind a thin wetting layer. This speed is sustained by the quasi-steady shape of the drop's main body, influenced by SAW attenuation. Notably, SAW attenuation becomes significant once the wave reaches the main body of the drop, with weaker effects observed under the air and the micron-thick liquid trail left behind the drop. The translating drop's speed is found to be dependent on the drop size, as well as on the SAW intensity. The drop's steady shape and speed are further informed by analytical consideration of a simplified traveling wave type model, that clarifies contributions from different physical effects. The theoretical results show qualitative and sometimes even quantitative agreement with the experiments, particularly regarding drop height and traveling speed. △ Less

Submitted 2 April, 2024; v1 submitted 19 December, 2023; originally announced December 2023.

Thin films dewetting with phase separation: Dependence of surface tension and Hamaker constant on concentration

Authors: Javier A. Diez, Alejandro G. González, Lou Kondic

Abstract: We study the instability of a thin film composed of two miscible fluids (binary fluid) placed on a solid planar surface. We include the fact that both the free surface and wetting energies depend on the mixture concentration. By assuming a linear relationship between these energies and both the bulk and surface concentrations, we analyze their effect on the phase separation of the constituent flui… ▽ More We study the instability of a thin film composed of two miscible fluids (binary fluid) placed on a solid planar surface. We include the fact that both the free surface and wetting energies depend on the mixture concentration. By assuming a linear relationship between these energies and both the bulk and surface concentrations, we analyze their effect on the phase separation of the constituent fluids. The problem is formulated within the gradient dynamics formulation applied to the thin film limit of the Cahn-Hilliard Navier-Stokes equations. The dependence of the free surface energy on concentration leads to a Marangoni type of effect, while the wetting energy resulting from fluid--solid interaction between the film and the substrate is described by a concentration dependent Hamaker constant. The linear stability analysis uncovers that both monotonous and oscillatory evolution is possible. While our problem formulation applies to any binary mixture that can be consistently modeled via the presented approach, a particular interpretation of the results is provided for the case of liquid metal alloy films on nanoscale. In this context, we find that rich dynamics is possible, including the evolution that may lead to formation of drops of the Janus--type as well as of core-shell configurations. △ Less

Submitted 8 July, 2023; v1 submitted 23 March, 2023; originally announced March 2023.

Comments: The two field problem is not consistent with the three field model

Active coating of a water drop by an oil film using a MHz-frequency surface acoustic wave

Authors: Avital Reizman, Amihai Horesh, Lou Kondic, Ofer Manor

Abstract: We employ a millimeter-scale piezoelectric acoustic actuator, which generates MHz-frequency surface acoustic waves (SAWs) in a solid substrate, to actively coat a drop of water by a macroscopic film of silicon oil as a paradigm for a small scale and low power coating system. We build upon previous studies on SAW induced dynamic wetting of a solid substrate, also known as the acoustowetting phenome… ▽ More We employ a millimeter-scale piezoelectric acoustic actuator, which generates MHz-frequency surface acoustic waves (SAWs) in a solid substrate, to actively coat a drop of water by a macroscopic film of silicon oil as a paradigm for a small scale and low power coating system. We build upon previous studies on SAW induced dynamic wetting of a solid substrate, also known as the acoustowetting phenomena, to actively drive a model low surface-energy liquid -- silicon oil -- coat a model liquid object -- a sessile drop of water. The oil film spreads along the path of the propagating SAW and comes in contact with the drop, which is placed in its path. The intensity of the SAW determines the rate and the extent to which a macroscopically thick film of oil will climb over the drop to partially or fully cover its surface. The dynamic wetting of the drop by the oil film is governed by a balance between acoustic, capillary, and gravitational contributions. Introducing a water drop as an object to be coated indicates the opportunity to coat liquid phase objects by employing SAWs and demonstrates that oil films which are actuated by SAWs may traverse curved objects and liquid surfaces. △ Less

Submitted 22 January, 2023; originally announced January 2023.

Flow through Pore-Size Graded Membrane Pore Networks

Authors: Binan Gu, Lou Kondic, Linda J. Cummings

Abstract: Pore-size gradients are often used in the design of membrane filters to increase filter lifetime and ensure fuller use of the initial membrane pore volume. In this work, we impose pore-size gradients in the setting of a membrane filter with an internal network of interconnected tube-like pores. We model the flow and foulant transport through the filter using the Hagen-Poiseuille framework coupled… ▽ More Pore-size gradients are often used in the design of membrane filters to increase filter lifetime and ensure fuller use of the initial membrane pore volume. In this work, we impose pore-size gradients in the setting of a membrane filter with an internal network of interconnected tube-like pores. We model the flow and foulant transport through the filter using the Hagen-Poiseuille framework coupled with advection equations via conservation of fluid and particle flux, with adsorption as the sole fouling mechanism. We study the influence of pore-size gradient on performance measures such as total filtrate throughput and accumulated contaminant concentration at the membrane downstream pore outlets. Within the limitations of our modeling assumptions we find that there is an optimal pore-radius gradient that maximizes filter efficiency independent of maximum pore length (an input parameter that influences the structure of the pore network), and that filters with longer characteristic pore length perform better. △ Less

Submitted 20 November, 2022; originally announced November 2022.

Thin viscoelastic dewetting films of Jeffreys type subjected to gravity and substrate interactions

Authors: Valeria Barra, Shahriar Afkhami, Lou Kondic

Abstract: This work presents a study of the interfacial dynamics of thin viscoelastic films subjected to the gravitational force and substrate interactions induced by the disjoining pressure, in two spatial dimensions. The governing equation is derived as a long-wave approximation of the Navier-Stokes equations for incompressible viscoelastic liquids under the effect of gravity, with the Jeffreys model for… ▽ More This work presents a study of the interfacial dynamics of thin viscoelastic films subjected to the gravitational force and substrate interactions induced by the disjoining pressure, in two spatial dimensions. The governing equation is derived as a long-wave approximation of the Navier-Stokes equations for incompressible viscoelastic liquids under the effect of gravity, with the Jeffreys model for viscoelastic stresses. For the particular cases of horizontal or inverted planes, the linear stability analysis is performed to investigate the influence of the physical parameters involved on the growth rate and length scales of instabilities. Numerical simulations of the nonlinear regime of the dewetting process are presented for the particular case of an inverted plane. Both gravity and the disjoining pressure are found to affect not only the length scale of instabilities, but also the final configuration of dewetting, by favoring the formation of satellite droplets, that are suppressed by the slippage with the solid substrate. △ Less

Submitted 8 April, 2022; originally announced April 2022.

Comments: already published

Journal ref: EPJ E, Vol 42, 14 pages (2019)

Network-based membrane filters: Influence of network and pore size variability on filtration performance

Authors: Binan Gu, Lou Kondic, Linda J. Cummings

Abstract: We model porous membrane filters as networks of connected cylindrical pores via a random network generation protocol, and their initial pore radii via a uniform distribution of widths that vary about some mean value. We investigate the influence of network and pore size (radius) variations on the performance of membrane filters that undergo adsorptive fouling. We find that membrane porosity variat… ▽ More We model porous membrane filters as networks of connected cylindrical pores via a random network generation protocol, and their initial pore radii via a uniform distribution of widths that vary about some mean value. We investigate the influence of network and pore size (radius) variations on the performance of membrane filters that undergo adsorptive fouling. We find that membrane porosity variations, independently of whether induced by variations of the pore radii or of the random pore network, are an important factor determining membrane filter performance. Network and pore size variations still play a role, in particular if pore radii variations are significant. To quantify the influence of these variations, we compare the performance metrics of networks built from pores of variable radii to their (equal porosity) counterparts built from pores of uniform radius. We show that the effect of pore radii variations is to increase throughput, but also to reduce foulant control. △ Less

Submitted 24 February, 2022; v1 submitted 28 October, 2021; originally announced November 2021.

MSC Class: 34B45; 76S05; 00A69

The influence of thermal effects on the breakup of thin films of nanometric thickness

Authors: Ryan H. Allaire, Linda J. Cummings, Lou Kondic

Abstract: We apply a previously developed asymptotic model (J. Fluid. Mech. 915, A133 (2021)) to study instabilities of free surface films of nanometric thickness on thermally conductive substrates in two and three spatial dimensions. While the specific focus is on metal films exposed to laser heating, the model itself applies to any setup involving films on the nanoscale whose material parameters are tempe… ▽ More We apply a previously developed asymptotic model (J. Fluid. Mech. 915, A133 (2021)) to study instabilities of free surface films of nanometric thickness on thermally conductive substrates in two and three spatial dimensions. While the specific focus is on metal films exposed to laser heating, the model itself applies to any setup involving films on the nanoscale whose material parameters are temperature-dependent. For the particular case of metal films heated from above, an important aspect is that the considered heating is volumetric, since the absorption length of the applied laser pulse is comparable to the film thickness. In such a setup, absorption of thermal energy and film evolution are closely correlated and must be considered self-consistently. The asymptotic model allows for a significant simplification, which is crucial from both modeling and computational points of view, since it allows for asymptotically correct averaging of the temperature over the film thickness. We find that the properties of the thermally conductive substrate -- in particular its thickness and rate of heat loss -- play a critical role in controlling the film temperature and dynamics. The film evolution is simulated using efficient GPU-based simulations which, when combined with the developed asymptotic model, allow for fully nonlinear time-dependent simulations in large three-dimensional computational domains. In addition to uncovering the role of the substrate and its properties in determining the film evolution, one important finding is that, at least for the considered range of material parameters, strong in-plane thermal diffusion in the film results in negligible spatial variations of temperature, and the film evolution is predominantly influenced by temporal variation of film viscosity and surface tension (dictated by average film temperature), as well as thermal conductivity of the substrate. △ Less

Submitted 23 October, 2021; v1 submitted 12 August, 2021; originally announced August 2021.

Filtration with multiple species of particles

Authors: Yixuan Sun, Lou Kondic, Linda J. Cummings

Abstract: Filtration of feed containing multiple species of particles is a common process in the industrial setting. In this work we propose a model for filtration of a suspension containing an arbitrary number of particle species, each with different affinities for the filter membrane. We formulate a number of optimization problems pertaining to effective separation of desired and undesired particles in th… ▽ More Filtration of feed containing multiple species of particles is a common process in the industrial setting. In this work we propose a model for filtration of a suspension containing an arbitrary number of particle species, each with different affinities for the filter membrane. We formulate a number of optimization problems pertaining to effective separation of desired and undesired particles in the special case of two particle species and we present results showing how properties such as feed composition affect the optimal filter design (internal pore structure). In addition, we propose a novel multi-stage filtration strategy, which provides a significant mass yield improvement for the desired particles, and, surprisingly, higher purity of the product as well. △ Less

Submitted 29 June, 2021; originally announced June 2021.

A Graphical Representation of Membrane Filtration

Authors: Binan Gu, Lou Kondic, Linda J. Cummings

Abstract: We analyze the performance of membrane filters represented by pore networks using two criteria: 1) total volumetric throughput of filtrate over the filter lifetime and 2) accumulated foulant concentration in the filtrate. We first formulate the governing equations of fluid flow on a general network, and we model transport and adsorption of particles (foulants) within the network by imposing an adv… ▽ More We analyze the performance of membrane filters represented by pore networks using two criteria: 1) total volumetric throughput of filtrate over the filter lifetime and 2) accumulated foulant concentration in the filtrate. We first formulate the governing equations of fluid flow on a general network, and we model transport and adsorption of particles (foulants) within the network by imposing an advection equation with a sink term on each pore (edge) as well as conservation of fluid and foulant volumetric flow rates at each pore junction (network vertex). Such a setup yields a system of partial differential equations on the network. We study the influence of three geometric network parameters on filter performance: 1) average number of neighbors of each vertex; 2) initial total void volume of the pore network; and 3) tortuosity of the network. We find that total volumetric throughput depends more strongly on the initial void volume than on average number of neighbors. Tortuosity, however, turns out to be a universal parameter, leading to almost perfect collapse of all results for a variety of different network architectures. In particular, the accumulated foulant concentration in the filtrate shows an exponential decay as tortuosity increases. △ Less

Submitted 8 March, 2022; v1 submitted 7 June, 2021; originally announced June 2021.

MSC Class: 76S05; 35R02; 94C15; 35E15

On efficient asymptotic modelling of thin films on thermally conductive substrates

Authors: Ryan H. Allaire, Linda J. Cummings, Lou Kondic

Abstract: We consider a free surface thin film placed on a thermally conductive substrate and exposed to an external heat source in a setup where the heat absorption depends on the local film thickness. Our focus is on modeling film evolution while the film is molten. The evolution of the film modifies local heat flow, which in turn may influence the film surface evolution through thermal variation of the f… ▽ More We consider a free surface thin film placed on a thermally conductive substrate and exposed to an external heat source in a setup where the heat absorption depends on the local film thickness. Our focus is on modeling film evolution while the film is molten. The evolution of the film modifies local heat flow, which in turn may influence the film surface evolution through thermal variation of the film's material properties. Thermal conductivity of the substrate plays an important role in determining the heat flow and the temperature field in the evolving film and in the substrate itself. In order to reach a tractable formulation, we use asymptotic analysis to develop a novel thermal model that is accurate, computationally efficient, and that accounts for the heat flow in both the in-plane and out-of plane directions. We apply this model to metal films of nanoscale thickness exposed to heating and melting by laser pulses, a setup commonly used for self and directed assembly of various metal geometries via dewetting while the films are in the liquid phase. We find that thermal effects play an important role, and in particular that the inclusion of temperature dependence in the metal viscosity modifies the time scale of the evolution significantly. On the other hand, in the considered setup the Marangoni (thermocapillary) effect turns out to be insignificant. △ Less

Submitted 9 February, 2021; v1 submitted 14 September, 2020; originally announced September 2020.

Comments: 35 pages, 16 figures

Instabilities of a thin liquid film in a funnel

Authors: T. -S. Lin, J. A. Dijksman, L. Kondic

Abstract: We explore flow of a completely wetting fluid in a funnel, with particular focus on contact line instabilities at the fluid front. While the flow in a funnel may be related to a number of other flow configurations as limiting cases, understanding its stability is complicated due to the presence of additional azimuthal curvature, as well as due to convergent flow effects imposed by the geometry. Co… ▽ More We explore flow of a completely wetting fluid in a funnel, with particular focus on contact line instabilities at the fluid front. While the flow in a funnel may be related to a number of other flow configurations as limiting cases, understanding its stability is complicated due to the presence of additional azimuthal curvature, as well as due to convergent flow effects imposed by the geometry. Convergent nature of the flow leads to thickening of the film, therefore influencing its stability properties. In this work, we analyze these stability properties by combining physical experiments, asymptotic modeling, self-similar type of analysis and numerical simulations. We show that appropriate long-wave based model supported by the input from experiments, simulations and linear stability analysis origination from the flow down an incline plane provides a basic insight allowing to understand the development of contact line instability and emerging lengthscales. △ Less

Submitted 8 July, 2021; v1 submitted 24 June, 2020; originally announced June 2020.

Journal ref: J. Fluid Mech. (2021), vol. 924, A26

Modeling and design optimization for pleated membrane filters

Authors: Yixuan Sun, Pejman Sanaei, Lou Kondic, Linda J. Cummings

Abstract: Pleated membrane filters, which offer larger surface area to volume ratios than unpleated membrane filters, are used in a wide variety of applications. However, the performance of the pleated filter, as characterized by a flux-throughput plot, indicates that the equivalent unpleated filter provides better performance under the same pressure drop. Earlier work (Sanaei & Cummings 2016) used a highly… ▽ More Pleated membrane filters, which offer larger surface area to volume ratios than unpleated membrane filters, are used in a wide variety of applications. However, the performance of the pleated filter, as characterized by a flux-throughput plot, indicates that the equivalent unpleated filter provides better performance under the same pressure drop. Earlier work (Sanaei & Cummings 2016) used a highly-simplified membrane model to investigate how the pleating effect and membrane geometry affect this performance differential. In this work, we extend this line of investigation and use asymptotic methods to couple an outer problem for the flow within the pleated structure to an inner problem that accounts for the pore structure within the membrane. We use our new model to formulate and address questions of optimal membrane design for a given filtration application. △ Less

Submitted 25 November, 2019; originally announced November 2019.

Journal ref: Phys. Rev. Fluids 5, 044306 (2020)

Oscillatory thermocapillary instability of a film heated by a thick substrate

Authors: William Batson, Linda J. Cummings, David Shirokoff, Lou Kondic

Abstract: In this work we consider a new class of oscillatory instabilities that pertain to thermocapillary destabilization of a liquid film heated by a solid substrate. We assume the substrate thickness and substrate-film thermal conductivity ratio are large so that the effect of substrate thermal diffusion is retained at leading order in the long-wave approximation. As a result, system dynamics are descri… ▽ More In this work we consider a new class of oscillatory instabilities that pertain to thermocapillary destabilization of a liquid film heated by a solid substrate. We assume the substrate thickness and substrate-film thermal conductivity ratio are large so that the effect of substrate thermal diffusion is retained at leading order in the long-wave approximation. As a result, system dynamics are described by a nonlinear partial differential equation for the film thickness that is nonlocally coupled to the full substrate heat equation. Perturbing about a steady quiescent state, we find that its stability is described by a non-self adjoint eigenvalue problem. We show that, under appropriate model parameters, the linearized eigenvalue problem admits complex eigenvalues that physically correspond to oscillatory (in time) instabilities of the thin film height. As the principal results of our work, we provide a complete picture of the susceptibility to oscillatory instabilities for different model parameters. Using this description, we conclude that oscillatory instabilities are more relevant experimentally for films heated by insulating substrates. Furthermore, we show that oscillatory instability where the fastest-growing (most unstable) wavenumber is complex, arises only for systems with sufficiently large substrate thicknesses. △ Less

Submitted 9 February, 2019; originally announced February 2019.

Comments: 28 pages, 14 figures

Computing dynamics of thin films via large scale GPU-based simulations

Authors: Michael-Angelo Y. -H. Lam, Linda J. Cummings, Lou Kondic

Abstract: We present the results of large scale simulations of 4th order nonlinear partial differential equations of dif- fusion type that are typically encountered when modeling dynamics of thin fluid films on substrates. The simulations are based on the alternate direction implicit (ADI) method, with the main part of the compu- tational work carried out in the GPU computing environment. Efficient and accu… ▽ More We present the results of large scale simulations of 4th order nonlinear partial differential equations of dif- fusion type that are typically encountered when modeling dynamics of thin fluid films on substrates. The simulations are based on the alternate direction implicit (ADI) method, with the main part of the compu- tational work carried out in the GPU computing environment. Efficient and accurate computations allow for simulations on large computational domains in three spatial dimensions (3D) and for long computational times. We apply the methods developed to the particular problem of instabilities of thin fluid films of nanoscale thickness. The large scale of the simulations minimizes the effects of boundaries, and also allows for simulating domains of the size encountered in published experiments. As an outcome, we can analyze the development of instabilities with an unprecedented level of detail. A particular focus is on analyzing the manner in which instability develops, in particular regarding differences between spinodal and nucleation types of dewetting for linearly unstable films, as well as instabilities of metastable films. Simulations in 3D allow for consideration of some recent results that were previously obtained in the 2D geometry (J. Fluid Mech. 841, 925 (2018)). Some of the new results include using Fourier transforms as well as topological invariants (Betti numbers) to distinguish the outcomes of spinodal and nucleation types of instabilities, describing in precise terms the complex processes that lead to the formation of satellite drops, as well as distinguishing the shape of the evolving film front in linearly unstable and metastable regimes. We also discuss direct comparison between simulations and available experimental results for nematic liquid crystal and polymer films. △ Less

Submitted 27 June, 2018; originally announced June 2018.

Comments: 38 pages, 25 figures

Self-assembly of a drop pattern from a two-dimensional grid of nanometric metallic filaments

Authors: Ingrith Cuellar, Pablo D. Ravazzoli, Javier A. Diez, Alejandro G. González, Nicholas A. Roberts, Jason D. Fowlkes, Philip D. Rack, Lou Kondic

Abstract: We report experiments, modeling and numerical simulations of the self--assembly of particle patterns obtained from a nanometric metallic square grid. Initially, nickel filaments of rectangular cross section are patterned on a SiO$_2$ flat surface, and then they are melted by laser irradiation with $\sim 20$ ns pulses. During this time, the liquefied metal dewets the substrate, leading to a linear… ▽ More We report experiments, modeling and numerical simulations of the self--assembly of particle patterns obtained from a nanometric metallic square grid. Initially, nickel filaments of rectangular cross section are patterned on a SiO$_2$ flat surface, and then they are melted by laser irradiation with $\sim 20$ ns pulses. During this time, the liquefied metal dewets the substrate, leading to a linear array of drops along each side of the squares. The experimental data provides a series of SEM images of the resultant morphology as a function of the number of laser pulses or cumulative liquid lifetime. These data are analyzed in terms of fluid mechanical models that account for mass conservation and consider flow evolution with the aim to predict the final number of drops resulting from each side of the square. The aspect ratio, $δ$, between the square sides' lengths and their widths is an essential parameter of the problem. Our models allow us to predict the $δ$-intervals within which a certain final number of drops are expected. The comparison with experimental data shows a good agreement with the model that explicitly considers the Stokes flow developed in the filaments neck region that lead to breakup points. Also, numerical simulations, that solve the Navier-Stokes equations along with slip boundary condition at the contact lines, are implemented to describe the dynamics of the problem. △ Less

Submitted 28 May, 2018; v1 submitted 18 May, 2018; originally announced May 2018.

Journal ref: Phys. Rev. E 98, 043101 (2018)

Energy dissipation in sheared wet granular assemblies

Authors: L. Kovalcinova, S. Karmakar, M. Schaber, A. -L. Schuhmacher, M. Scheel, M. DiMichiel, M. Brinkmann, R. Seemann, L. Kondic

Abstract: Energy dissipation in sheared dry and wet granulates is considered in the presence of an externally applied confining pressure. Discrete element simulations reveal that for sufficiently small confining pressures, the energy dissipation is dominated by the effects related to the presence of cohesive forces between the particles. The residual resistance against shear can be quantitatively explained… ▽ More Energy dissipation in sheared dry and wet granulates is considered in the presence of an externally applied confining pressure. Discrete element simulations reveal that for sufficiently small confining pressures, the energy dissipation is dominated by the effects related to the presence of cohesive forces between the particles. The residual resistance against shear can be quantitatively explained by a combination of two effects arising in a wet granulate: i) enhanced friction at particle contacts in the presence of attractive capillary forces, and ii) energy dissipation due to the rupture and reformation of liquid bridges. Coulomb friction at grain contacts gives rise to an energy dissipation which grows linearly with increasing confining pressure, for both dry and wet granulates. Because of a lower Coulomb friction coefficient in the case of wet grains, as the confining pressure increases the energy dissipation for dry systems is faster than for wet ones. △ Less

Submitted 28 June, 2018; v1 submitted 24 March, 2017; originally announced March 2017.

Journal ref: Phys. Rev. E 98, 032905 (2018)

Direct numerical simulation of variable surface tension flows using a Volume-of-Fluid method

Authors: Ivana Seric, Shahriar Afkhami, Lou Kondic

Abstract: We develop a general methodology for the inclusion of variable surface tension into a Volume-of-Fluid based Navier-Stokes solver. This new numerical model provides a robust and accurate method for computing the surface gradients directly by finding the tangent directions on the interface using height functions. The implementation is applicable to both temperature and concentration dependent surfac… ▽ More We develop a general methodology for the inclusion of variable surface tension into a Volume-of-Fluid based Navier-Stokes solver. This new numerical model provides a robust and accurate method for computing the surface gradients directly by finding the tangent directions on the interface using height functions. The implementation is applicable to both temperature and concentration dependent surface tension, along with the setups involving a large jump in the temperature between the fluid and its surrounding, as well as the situations where the concentration should be strictly confined to the fluid domain, such as the mixing of fluids with different surface tension coefficients. We demonstrate the applicability of our method to thermocapillary migration of bubbles and coalescence of drops characterized by different surface tension. △ Less

Submitted 1 March, 2017; originally announced March 2017.

Interfacial Dynamics of Thin Viscoelastic Films and Drops

Authors: Valeria Barra, Shahriar Afkhami, Lou Kondic

Abstract: We present a computational investigation of thin viscoelastic films and drops on a solid substrate subject to the van der Waals interaction force, in two spatial dimensions. The governing equations are obtained within a long-wave approximation of the Navier-Stokes equations with Jeffreys model for viscoelastic stresses. We investigate the effects of viscoelasticity, Newtonian viscosity, and the su… ▽ More We present a computational investigation of thin viscoelastic films and drops on a solid substrate subject to the van der Waals interaction force, in two spatial dimensions. The governing equations are obtained within a long-wave approximation of the Navier-Stokes equations with Jeffreys model for viscoelastic stresses. We investigate the effects of viscoelasticity, Newtonian viscosity, and the substrate slippage on the dynamics of thin viscoelastic films. We also study the effects of viscoelasticity on drops that spread or recede on a prewetted substrate. For dewetting films, the numerical results show the presence of multiple secondary droplets for higher values of elasticity, consistently with experimental findings. For drops, we find that elastic effects lead to deviations from the Cox-Voinov law for partially wetting fluids. In general, elastic effects enhance spreading, and suppress retraction, compared to Newtonian ones. △ Less

Submitted 8 October, 2016; v1 submitted 23 February, 2016; originally announced February 2016.

Comments: Journal of Non-Newtonian Fluid Mechanics, 2016

Instability of nanometric fluid films on a thermally conductive substrate

Authors: Nanyi Dong, Lou Kondic

Abstract: We consider thin fluid films placed on thermally conductive substrates and exposed to time-dependent spatially uniform heat source. The evolution of the films is considered within the long-wave framework in the regime such that both fluid/substrate interaction, modeled via disjoining pressure, and Marangoni forces, are relevant. We analyze the problem by the means of linear stability analysis as w… ▽ More We consider thin fluid films placed on thermally conductive substrates and exposed to time-dependent spatially uniform heat source. The evolution of the films is considered within the long-wave framework in the regime such that both fluid/substrate interaction, modeled via disjoining pressure, and Marangoni forces, are relevant. We analyze the problem by the means of linear stability analysis as well as by time-dependent nonlinear simulations. The main finding is that when self-consistent computation of the temperature field is performed, a complex interplay of different instability mechanisms results. This includes either monotonous or oscillatory dynamics of the free surface. In particular, we find that the oscillatory behavior is absent if the film temperature is assumed to be slaved to the current value of the film thickness. The results are discussed within the context of liquid metal films, but are of relevance to dynamics of any thin film involving variable temperature of the free surface, such that the temperature and the film interface itself evolve on comparable time scales. △ Less

Submitted 15 June, 2016; v1 submitted 1 February, 2016; originally announced February 2016.

Scaling Properties of Force Networks for Compressed Particulate Systems

Authors: Lenka Kovalcinova, Arnaud Goullet, Lou Kondic

Abstract: We consider, computationally and experimentally, the scaling properties of force networks in the systems of circular particles exposed to compression in two spatial dimensions. The simulations consider polydisperse and monodisperse particles, both frictional and frictionless, and in experiments we use monodisperse and bidisperse particles. While for some of the considered systems we observe consis… ▽ More We consider, computationally and experimentally, the scaling properties of force networks in the systems of circular particles exposed to compression in two spatial dimensions. The simulations consider polydisperse and monodisperse particles, both frictional and frictionless, and in experiments we use monodisperse and bidisperse particles. While for some of the considered systems we observe consistent scaling exponents describing the behavior of the force networks, we find that this behavior is it not universal. In particular, monodisperse frictionless systems that partially crystallize under compression, show scaling properties that are significantly different compared to the other considered systems. The findings of non-universality are confirmed by explicitly computing fractal dimension for the considered systems. The results of physical experiments are consistent with the results obtained in simulations of frictional particles. △ Less

Submitted 17 November, 2015; originally announced November 2015.

Journal ref: Phys. Rev. E 93, 042903 (2016)

Structure of force networks in tapped particulate systems of disks and pentagons (Part 2): Persistence analysis

Authors: L. Kondic, M. Kramar, L. A. Pangolin, C. M. Carlevaro, K. Mischaikow

Abstract: In the companion paper~\cite{paper1}, we use classical measures based on force probability density functions (PDFs), as well as Betti numbers (quantifying the number of components, related to force chains, and loops), to describe the force networks in tapped systems of disks and pentagons. In the present work, we focus on the use of persistence analysis, that allows to describe these networks in m… ▽ More In the companion paper~\cite{paper1}, we use classical measures based on force probability density functions (PDFs), as well as Betti numbers (quantifying the number of components, related to force chains, and loops), to describe the force networks in tapped systems of disks and pentagons. In the present work, we focus on the use of persistence analysis, that allows to describe these networks in much more detail. This approach allows not only to describe, but also to quantify the differences between the force networks in different realizations of a system, in different parts of the considered domain, or in different systems. We show that persistence analysis clearly distinguishes the systems that are very difficult or impossible to differentiate using other means. One important finding is that the differences in force networks between disks and pentagons are most apparent when loops are considered: the quantities describing properties of the loops may differ significantly even if other measures (properties of components, Betti numbers, or force PDFs) do not distinguish clearly the investigated systems. △ Less

Submitted 14 October, 2015; originally announced October 2015.

Journal ref: Phys. Rev. E 93, 062903 (2016)

Structure of force networks in tapped particulate systems of disks and pentagons (Part 1): Clusters and Loops

Authors: L. A. Pugnaloni, C. M. Carlevaro, M. Kramar, K. Mischaikow, L. Kondic

Abstract: The force network of a granular assembly, defined by the contact network and the corresponding contact forces, carries valuable information about the state of the packing. Simple analysis of these networks based on the distribution of force strengths is rather insensitive to the changes in preparation protocols or to the types of particles. In this paper we consider two dimensional simulations of… ▽ More The force network of a granular assembly, defined by the contact network and the corresponding contact forces, carries valuable information about the state of the packing. Simple analysis of these networks based on the distribution of force strengths is rather insensitive to the changes in preparation protocols or to the types of particles. In this paper we consider two dimensional simulations of tapped systems built from frictional disks and pentagons, and study the structure of the force networks of granular packings by considering network's topology as force thresholds are varied. We show that the number of clusters and loops observed in the force networks as a function of the force threshold are markedly different for disks and pentagons if the tangential contact forces are considered, whereas they are surprisingly similar for the network defined by the normal forces. In particular, the results indicate that, overall, the force network is more heterogeneous for disks than for pentagons. Additionally, we show that the states obtained by tapping with different intensities that display similar packing fraction are difficult to distinguish based on simple topological invariants. △ Less

Submitted 11 October, 2015; originally announced October 2015.

Journal ref: Phys. Rev. E 93, 062902 (2016)

A numerical approach for the direct computation of flows including fluid-solid interaction: modeling contact angle, film rupture, and dewetting

Authors: K. Mahady, S. Afkhami, L. Kondic

Abstract: In this paper, we present a computationally efficient method for including fluid-solid interactions into direct numerical simulations of the Navier-Stokes equations. This method is found to be as powerful as our earlier formulation [J. Comp. Phys., vol. 249: 243 (2015)], while outperforming the earlier method in terms of computational efficiency. The performance and efficacy of the presented metho… ▽ More In this paper, we present a computationally efficient method for including fluid-solid interactions into direct numerical simulations of the Navier-Stokes equations. This method is found to be as powerful as our earlier formulation [J. Comp. Phys., vol. 249: 243 (2015)], while outperforming the earlier method in terms of computational efficiency. The performance and efficacy of the presented method are demonstrated by computing contact angles of droplets at equilibrium. Furthermore, we study the instability of films due to destabilizing fluid-solid interactions, and discuss the influence of contact angle and inertial effects on film breakup. In particular, direct simulation results show an increase in the final characteristic length scales when compared to the predictions of a linear stability analysis, suggesting significant influence of nonlinear effects. Our results also show that emerging length scales differ, depending on a number of physical dimensions considered. △ Less

Submitted 12 April, 2016; v1 submitted 25 September, 2015; originally announced September 2015.

Comments: Submitted to: Physics of Fluids

Role of Thermal Fluctuations in Nonlinear Thin Film Dewetting

Authors: S. Nesic, R. Cuerno, E. Moro, L. Kondic

Abstract: The spontaneous formation of droplets via dewetting of a thin fluid film from a solid substrate allows for materials nanostructuring, under appropriate experimental control. While thermal fluctuations are expected to play a role in this process, their relevance has remained poorly understood, particularly during the nonlinear stages of evolution. Within a stochastic lubrication framework, we show… ▽ More The spontaneous formation of droplets via dewetting of a thin fluid film from a solid substrate allows for materials nanostructuring, under appropriate experimental control. While thermal fluctuations are expected to play a role in this process, their relevance has remained poorly understood, particularly during the nonlinear stages of evolution. Within a stochastic lubrication framework, we show that thermal noise speeds up and substantially influences the formation and evolution of the droplet arrangement. As compared with their deterministic counterparts, for a fixed spatial domain, stochastic systems feature a smaller number of droplets, with a larger variability in sizes and space distribution. Finally, we discuss the influence of stochasticity on droplet coarsening for very long times. △ Less

Submitted 20 May, 2015; originally announced May 2015.

Comments: 6 pages, 5 figures, 2 movies available upon request

Percolation and jamming transitions in particulate systems with and without cohesion

Authors: L. Kovalcinova, A. Goullet, L. Kondic

Abstract: We consider percolation and jamming transitions for particulate systems exposed to compression. For the systems built of particles interacting by purely repulsive forces in addition to friction and viscous damping, it is found that these transitions are influenced by a number of effects, and in particular by the compression rate. In a quasi-static limit, we find that for the considered type of int… ▽ More We consider percolation and jamming transitions for particulate systems exposed to compression. For the systems built of particles interacting by purely repulsive forces in addition to friction and viscous damping, it is found that these transitions are influenced by a number of effects, and in particular by the compression rate. In a quasi-static limit, we find that for the considered type of interaction between the particles, percolation and jamming transitions coincide. For cohesive systems, however, or for any system exposed to even slow dynamics, the differences between the considered transitions are found and quantified. △ Less

Submitted 16 September, 2015; v1 submitted 15 February, 2015; originally announced February 2015.

A volume of fluid method for simulating fluid/fluid interfaces in contact with solid boundaries

Authors: Kyle Mahady, Shahriar Afkhami, Lou Kondic

Abstract: In this paper, we present a novel approach to model the fluid/solid interaction forces in a direct solver of the Navier-Stokes equations based on the volume of fluid interface tracking method. The key ingredient of the model is the explicit inclusion of the fluid/solid interaction forces into the governing equations. We show that the interaction forces lead to a partial wetting condition and in pa… ▽ More In this paper, we present a novel approach to model the fluid/solid interaction forces in a direct solver of the Navier-Stokes equations based on the volume of fluid interface tracking method. The key ingredient of the model is the explicit inclusion of the fluid/solid interaction forces into the governing equations. We show that the interaction forces lead to a partial wetting condition and in particular to a natural definition of the equilibrium contact angle. We present two numerical methods to discretize the interaction forces that enter the model; these two approaches differ in complexity and convergence. To validate the computational framework, we consider the application of these models to simulate two-dimensional drops at equilibrium, as well as drop spreading. We demonstrate that the model, by including the underlying physics, captures contact line dynamics for arbitrary contact angles. More generally, the approach permits novel means to study contact lines, as well as a diverse range of phenomena that previously could not be addressed in direct simulations. △ Less

Submitted 13 June, 2015; v1 submitted 3 September, 2014; originally announced September 2014.

Journal ref: Journal of Computational Physics 294 (2015) 243-257

Capillary focusing close to a topographic step: Shape and instability of confined liquid filaments

Authors: M. Hein, S. Afkhami, R. Seemann, L. Kondic

Abstract: Step-emulsification is a microfluidic technique for droplet generation which relies on the abrupt decrease of confinement of a liquid filament surrounded by a continuous phase. A striking feature of this geometry is the transition between two distinct droplet breakup regimes, the "step-regime" and "jet-regime", at a critical capillary number. In the step-regime, small and monodisperse droplets bre… ▽ More Step-emulsification is a microfluidic technique for droplet generation which relies on the abrupt decrease of confinement of a liquid filament surrounded by a continuous phase. A striking feature of this geometry is the transition between two distinct droplet breakup regimes, the "step-regime" and "jet-regime", at a critical capillary number. In the step-regime, small and monodisperse droplets break off from the filament directly at a topographic step, while in the jet-regime a jet protrudes into the larger channel region and large plug-like droplets are produced. We characterize the breakup behavior as a function of the filament geometry and the capillary number and present experimental results on the shape and evolution of the filament for a wide range of capillary numbers in the jet-regime. We compare the experimental results with numerical simulations. Assumptions based on the smallness of the depth of the microfluidic channel allow to reduce the governing equations to the Hele-Shaw problem with surface tension. The full nonlinear equations are then solved numerically using a volume-of-fluid based algorithm. The computational framework also captures the transition between both regimes, offering a deeper understanding of the underlying breakup mechanism. △ Less

Submitted 3 September, 2014; v1 submitted 20 May, 2014; originally announced May 2014.

Evolution of Force Networks in Dense Particulate Media

Authors: Miroslav Kramar, Arnaud Goullet, Lou Kondic, Konstantin Mischaikow

Abstract: We introduce novel sets of measures with the goal of describing dynamical properties of force networks in dense particulate systems. The presented approach is based on persistent homology and allows for extracting precise, quantitative measures that describe the evolution of geometric features of the interparticle forces, without necessarily considering the details related to individual contacts b… ▽ More We introduce novel sets of measures with the goal of describing dynamical properties of force networks in dense particulate systems. The presented approach is based on persistent homology and allows for extracting precise, quantitative measures that describe the evolution of geometric features of the interparticle forces, without necessarily considering the details related to individual contacts between particles. The networks considered emerge from discrete element simulations of two dimensional particulate systems consisting of compressible frictional circular disks. We quantify the evolution of the networks for slowly compressed systems undergoing jamming transition. The main findings include uncovering significant but localized changes of force networks for unjammed systems, global (system-wide) changes as the systems evolve through jamming, to be followed by significantly less dramatic evolution for the jammed states. We consider both connected components, related in loose sense to force chains, and loops, and find that both measures provide a significant insight into the evolution of force networks. In addition to normal, we consider also tangential forces between the particles and find that they evolve in the consistent manner. Consideration of both frictional and frictionless systems leads us to the conclusion that friction plays a significant role in determining the dynamical properties of the considered networks. We find that the proposed approach describes the considered networks in a precise yet tractable manner, allowing to identify novel features which could be difficult or impossible to describe using other approaches. △ Less

Submitted 24 April, 2014; originally announced April 2014.

Modelling spreading dynamics of liquid crystals in three spatial dimensions

Authors: Te-Sheng Lin, Lou Kondic, Uwe Thiele, Linda J. Cummings

Abstract: We study spreading dynamics of nematic liquid crystal droplets within the framework of the long-wave approximation. A fourth order nonlinear parabolic partial differential equation governing the free surface evolution is derived. The influence of elastic distortion energy and of imposed anchoring variations at the substrate are explored through linear stability analysis and scaling arguments, whic… ▽ More We study spreading dynamics of nematic liquid crystal droplets within the framework of the long-wave approximation. A fourth order nonlinear parabolic partial differential equation governing the free surface evolution is derived. The influence of elastic distortion energy and of imposed anchoring variations at the substrate are explored through linear stability analysis and scaling arguments, which yield useful insight and predictions for the behaviour of spreading droplets. This behaviour is captured by fully nonlinear time-dependent simulations of three dimensional droplets spreading in the presence of anchoring variations that model simple defects in the nematic orientation at the substrate. △ Less

Submitted 21 March, 2013; originally announced March 2013.

Journal ref: J. Fluids, Mech., 729, 214 (2013)

Numerical simulation of ejected molten metal-nanoparticles liquefied by laser irradiation: Interplay of geometry and dewetting

Authors: S. Afkhami, L. Kondic

Abstract: Metallic nanoparticles, liquefied by fast laser irradiation, go through a rapid change of shape attempting to minimize their surface energy. The resulting nanodrops may be ejected from the substrate when the mechanisms leading to dewetting are sufficiently strong, as in the experiments involving gold nanoparticles [Habenicht et al., Science 309, 2043 (2005)]. We use a direct continuum-level approa… ▽ More Metallic nanoparticles, liquefied by fast laser irradiation, go through a rapid change of shape attempting to minimize their surface energy. The resulting nanodrops may be ejected from the substrate when the mechanisms leading to dewetting are sufficiently strong, as in the experiments involving gold nanoparticles [Habenicht et al., Science 309, 2043 (2005)]. We use a direct continuum-level approach to accurately model the process of liquid nanodrop formation and the subsequent ejection from the substrate. Our computations show a significant role of inertial effects and an elaborate interplay of initial geometry and wetting properties: e.g., we can control the direction of ejection by prescribing appropriate initial shape and/or wetting properties. The basic insight regarding ejection itself can be reached by considering a simple effective model based on an energy balance. We validate our computations by comparing directly with the experiments specified above involving the length scales measured in hundreds of nanometers, and with molecular dynamics simulations on much shorter scales measured in tens of atomic diameters, as in [M. Fuentes-Cabrera et al., Phys. Rev. E 83, 041603 (2011)]. The quantitative agreement, in addition to illustrating how to controlling particle ejection, shows utility of continuum-based simulation in describing dynamics on nanoscale quantitatively, even in a complex setting as considered here. △ Less

Submitted 28 June, 2013; v1 submitted 6 March, 2013; originally announced March 2013.

Journal ref: Phys. Rev. Lett. 111, 034501 (2013)

Note on the hydrodynamic description of thin nematic films: strong anchoring model

Authors: Te-Sheng Lin, Linda J. Cummings, Andrew J. Archer, Lou Kondic, Uwe Thiele

Abstract: We discuss the long-wave hydrodynamic model for a thin film of nematic liquid crystal in the limit of strong anchoring at the free surface and at the substrate. We rigorously clarify how the elastic energy enters the evolution equation for the film thickness in order to provide a solid basis for further investigation: several conflicting models exist in the literature that predict qualitatively di… ▽ More We discuss the long-wave hydrodynamic model for a thin film of nematic liquid crystal in the limit of strong anchoring at the free surface and at the substrate. We rigorously clarify how the elastic energy enters the evolution equation for the film thickness in order to provide a solid basis for further investigation: several conflicting models exist in the literature that predict qualitatively different behaviour. We consolidate the various approaches and show that the long-wave model derived through an asymptotic expansion of the full nemato-hydrodynamic equations with consistent boundary conditions agrees with the model one obtains by employing a thermodynamically motivated gradient dynamics formulation based on an underlying free energy functional. As a result, we find that in the case of strong anchoring the elastic distortion energy is always stabilising. To support the discussion in the main part of the paper, an appendix gives the full derivation of the evolution equation for the film thickness via asymptotic expansion. △ Less

Submitted 22 July, 2013; v1 submitted 17 January, 2013; originally announced January 2013.

Journal ref: Phys. Fluids, 25, 082102 (2013)

Thin films flowing down inverted substrates: Three dimensional flow

Authors: T. -S. Lin, L. Kondic, A. Filippov

Abstract: We study contact line induced instabilities for a thin film of fluid under destabilizing gravitational force in three dimensional setting. In the previous work (Phys. Fluids, {\bf 22}, 052105 (2010)), we considered two dimensional flow, finding formation of surface waves whose properties within the implemented long wave model depend on a single parameter, $D=(3Ca)^{1/3}\cotα$, where $Ca$ is the ca… ▽ More We study contact line induced instabilities for a thin film of fluid under destabilizing gravitational force in three dimensional setting. In the previous work (Phys. Fluids, {\bf 22}, 052105 (2010)), we considered two dimensional flow, finding formation of surface waves whose properties within the implemented long wave model depend on a single parameter, $D=(3Ca)^{1/3}\cotα$, where $Ca$ is the capillary number and $α$ is the inclination angle. In the present work we consider fully 3D setting and discuss the influence of the additional dimension on stability properties of the flow. In particular, we concentrate on the coupling between the surface instability and the transverse (fingering) instabilities of the film front. We furthermore consider these instabilities in the setting where fluid viscosity varies in the transverse direction. It is found that the flow pattern strongly depends on the inclination angle and the viscosity gradient. △ Less

Submitted 1 October, 2011; v1 submitted 28 September, 2011; originally announced September 2011.

Journal ref: Phys. Fluids, 24, 022105 (2012)

Thin films flowing down inverted substrates: two dimensional flow

Authors: Te-sheng Lin, Lou Kondic

Abstract: We consider free surface instabilities of films flowing on inverted substrates within the framework of lubrication approximation. We allow for the presence of fronts and related contact lines, and explore the role which they play in instability development. It is found that a contact line, modeled by a commonly used precursor film model, leads to free surface instabilities without any additional… ▽ More We consider free surface instabilities of films flowing on inverted substrates within the framework of lubrication approximation. We allow for the presence of fronts and related contact lines, and explore the role which they play in instability development. It is found that a contact line, modeled by a commonly used precursor film model, leads to free surface instabilities without any additional natural or excited perturbations. A single parameter D=(3Ca)^{1/3}\cotα$, where $Ca$ is the capillary number and $α$ is the inclination angle, is identified as a governing parameter in the problem. This parameter may be interpreted to reflect the combined effect of inclination angle, film thickness, Reynolds number and the fluid flux. Variation of $D$ leads to change of the wave-like properties of the instabilities, allowing us to observe traveling wave behavior, mixed waves, and the waves resembling solitary ones. △ Less

Submitted 16 March, 2010; v1 submitted 16 December, 2009; originally announced December 2009.

Journal ref: Phys. Fluids, 22, 052105 (2010)

How do drops evaporate?

Authors: Nebojsa Murisic, Lou Kondic

Abstract: We consider evaporation of pure liquid drops on a thermally conductive substrate. Two evaporative models are considered: one that concentrates on the liquid phase in determining evaporative flux, and the other one that centers on the gas/vapor phase. A single governing equation for the evolution of drop thickness, including both models, is developed. Experiments are used to estimate relevant par… ▽ More We consider evaporation of pure liquid drops on a thermally conductive substrate. Two evaporative models are considered: one that concentrates on the liquid phase in determining evaporative flux, and the other one that centers on the gas/vapor phase. A single governing equation for the evolution of drop thickness, including both models, is developed. Experiments are used to estimate relevant parameters. We show how the derived governing equation can be used to predict which evaporation model is appropriate under considered experimental conditions. △ Less

Submitted 22 October, 2008; v1 submitted 21 February, 2008; originally announced February 2008.