-
Scanning acoustic microscopy characterization of cold sprayed coatings deposited on grooved substrates
Authors:
Martin Koller,
Jan Cizek,
Michaela Janovská,
Martin Ševčík,
Jan Kondas,
Reeti Singh,
Hanuš Seiner
Abstract:
The effect of non-planar substrate surface on homogeneity and quality of cold sprayed (CS) deposits was studied by scanning acoustic microscopy (SAM). Fe coatings were cold sprayed onto Al substrates containing artificially introduced grooves of square- and trapezoid-shaped geometries, with flat or cylindrical bottoms. The Al substrates were either wrought or cold sprayed, to comprehend their pros…
▽ More
The effect of non-planar substrate surface on homogeneity and quality of cold sprayed (CS) deposits was studied by scanning acoustic microscopy (SAM). Fe coatings were cold sprayed onto Al substrates containing artificially introduced grooves of square- and trapezoid-shaped geometries, with flat or cylindrical bottoms. The Al substrates were either wrought or cold sprayed, to comprehend their prospective influence on the Fe coatings build-up. SAM was then used to assess morphological properties of the materials from the cross-view and top-view directions. The microstructure below the surface of the studied samples was visualized by measuring the amplitudes of the reflection echoes and the velocity of the ultrasonic waves. The SAM analysis revealed that the regions of coating imperfections around the grooves are larger than what is suggested by standard scanning electron microscopy (SEM) observations. Furthermore, we found that the seemingly non-influenced coating regions that appear perfectly homogeneous and dense in SEM do, in fact, possess heterogeneous microstructure associated with the individual CS nozzle passes.
△ Less
Submitted 11 July, 2024; v1 submitted 28 June, 2024;
originally announced June 2024.
-
Chemically reactive thin films: dynamics and stability
Authors:
Tilman Richter,
Paolo Malgaretti,
Thomas M. Koller,
Jens Harting
Abstract:
Catalyst particles or complexes suspended in liquid films can trigger chemical reactions leading to inhomogeneous concentrations of reactants and products in the film. We demonstrate that the sensitivity of the liquid film's gas-liquid surface tension to these inhomogeneous concentrations strongly impacts the film stability. Using linear stability analysis, we identify novel scenarios in which the…
▽ More
Catalyst particles or complexes suspended in liquid films can trigger chemical reactions leading to inhomogeneous concentrations of reactants and products in the film. We demonstrate that the sensitivity of the liquid film's gas-liquid surface tension to these inhomogeneous concentrations strongly impacts the film stability. Using linear stability analysis, we identify novel scenarios in which the film can be either stabilized or destabilized by the reactions. Furthermore, we find so far unrevealed rupture mechanisms which are absent in the chemically inactive case. The linear stability predictions are confirmed by numerical simulations, which also demonstrate that the shape of chemically active droplets can depart from the spherical cap and that unsteady states such as traveling and standing waves might appear. Finally, we critically discuss the relevance of our predictions by showing that the range of our selected parameters is well accessible by typical experiments.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
Electric-field-controlled cold dipolar collisions between trapped CH$_3$F molecules
Authors:
M. Koller,
F. Jung,
J. Phrompao,
M. Zeppenfeld,
I. M. Rabey,
G. Rempe
Abstract:
Reaching high densities is a key step towards cold-collision experiments with polyatomic molecules. We use a cryofuge to load up to 2$\times10^7$ CH$_3$F molecules into a box-like electric trap, achieving densities up to 10$^7$/cm$^3$ at temperatures around 350 mK where the elastic dipolar cross-section exceeds 7$\times$10$^{-12}$cm$^2$. We measure inelastic rate constants below 4$\times$10…
▽ More
Reaching high densities is a key step towards cold-collision experiments with polyatomic molecules. We use a cryofuge to load up to 2$\times10^7$ CH$_3$F molecules into a box-like electric trap, achieving densities up to 10$^7$/cm$^3$ at temperatures around 350 mK where the elastic dipolar cross-section exceeds 7$\times$10$^{-12}$cm$^2$. We measure inelastic rate constants below 4$\times$10$^{-8}$cm$^3$/s and control these by tuning a homogeneous electric field that covers a large fraction of the trap volume. Comparison to ab-initio calculations gives excellent agreement with dipolar relaxation. Our techniques and findings are generic and immediately relevant for other cold-molecule collision experiments.
△ Less
Submitted 26 April, 2022;
originally announced April 2022.
-
Copper and silver thin film systems display differences in antiviral and antibacterial properties -- implications for the prevention of SARS-CoV-2 infections
Authors:
Toni Luise Meister,
Jill Fortmann,
Marina Breisch,
Christina Sengstock,
Eike Steinmann,
Manfred Koeller,
Stephanie Pfaender,
Alfred Ludwig
Abstract:
The current Coronavirus Disease 19 (COVID-19) pandemic has exemplified the need for simple and efficient prevention strategies that can be rapidly implemented to mitigate infection risks. Various surfaces have a long history of antimicrobial properties and are well described for the prevention of bacterial infections. However, their effect on many viruses has not been studied in depth. In the cont…
▽ More
The current Coronavirus Disease 19 (COVID-19) pandemic has exemplified the need for simple and efficient prevention strategies that can be rapidly implemented to mitigate infection risks. Various surfaces have a long history of antimicrobial properties and are well described for the prevention of bacterial infections. However, their effect on many viruses has not been studied in depth. In the context of COVID-19, several surfaces, including copper (Cu) and silver (Ag) coatings have been described as efficient antiviral measures that can easily be implemented to slow viral transmission. In this study, we detected antiviral properties against Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) on surfaces, which were coated with Cu by magnetron sputtering. However, no effect of Ag on viral titers was observed, in clear contrast to its well-known antibacterial properties. Further enhancement of Ag ion release kinetics based on an electrochemical sacrificial anode mechanism did not increase antiviral activity. These results clearly demonstrate that Cu and Ag thin film systems display significant differences in antiviral and antibacterial properties which need to be considered upon implementation.
△ Less
Submitted 22 June, 2021;
originally announced June 2021.
-
Buffer-gas cooling of molecules in the low-density regime: Comparison between simulation and experiment
Authors:
Thomas Gantner,
Manuel Koller,
Xing Wu,
Gerhard Rempe,
Martin Zeppenfeld
Abstract:
Cryogenic buffer gas cells have been a workhorse for the cooling of molecules in the last decades. The straightforward sympathetic cooling principle makes them applicable to a huge variety of different species. Notwithstanding this success, detailed simulations of buffer gas cells are rare, and have never been compared to experimental data in the regime of low to intermediate buffer gas densities.…
▽ More
Cryogenic buffer gas cells have been a workhorse for the cooling of molecules in the last decades. The straightforward sympathetic cooling principle makes them applicable to a huge variety of different species. Notwithstanding this success, detailed simulations of buffer gas cells are rare, and have never been compared to experimental data in the regime of low to intermediate buffer gas densities. Here, we present a numerical approach based on a trajectory analysis, with molecules performing a random walk in the cell due to collisions with a homogeneous buffer gas. This method can reproduce experimental flux and velocity distributions of molecules emerging from the buffer gas cell for varying buffer gas densities. This includes the strong decrease in molecule output from the cell for increasing buffer gas density and the so-called boosting effect, when molecules are accelerated by buffer-gas atoms after leaving the cell. The simulations provide various insights which could substantially improve buffer-gas cell design.
△ Less
Submitted 21 January, 2020;
originally announced January 2020.
-
A cryofuge for cold-collision experiments with slow polar molecules
Authors:
Xing Wu,
Thomas Gantner,
Manuel Koller,
Martin Zeppenfeld,
Sotir Chervenkov,
Gerhard Rempe
Abstract:
Ultracold molecules represent a fascinating research frontier in physics and chemistry, but it has proven challenging to prepare dense samples at low velocities. Here we present a solution to this goal by a non-conventional approach dubbed cryofuge. It employs centrifugal force to bring cryogenically cooled molecules to kinetic energies below $1\,$K$\times k_B$ in the laboratory frame, with corres…
▽ More
Ultracold molecules represent a fascinating research frontier in physics and chemistry, but it has proven challenging to prepare dense samples at low velocities. Here we present a solution to this goal by a non-conventional approach dubbed cryofuge. It employs centrifugal force to bring cryogenically cooled molecules to kinetic energies below $1\,$K$\times k_B$ in the laboratory frame, with corresponding fluxes exceeding $10^{10}$/s at velocities below $20\,$m/s. By attaining densities higher than $10^9$/cm$^3$ and interaction times longer than $25\,$ms in samples of fluoromethane as well as deuterated ammonia, we observe cold dipolar collisions between molecules and determine their collision cross sections.
△ Less
Submitted 16 October, 2017;
originally announced October 2017.
-
Empirical Features of Spontaneous and Induced Traffic Breakdowns in Free Flow at Highway Bottlenecks
Authors:
Boris S. Kerner,
Micha Koller,
Sergey L. Klenov,
Hubert Rehborn,
Michael Leibel
Abstract:
Based on an empirical study of real field traffic data measured in 1996--2014 through road detectors installed on German freeways, we reveal physical features of empirical nuclei for spontaneous traffic breakdown in free flow at highway bottlenecks. It is shown that the source of a nucleus for traffic breakdown is the solely difference between empirical spontaneous and induced traffic breakdowns a…
▽ More
Based on an empirical study of real field traffic data measured in 1996--2014 through road detectors installed on German freeways, we reveal physical features of empirical nuclei for spontaneous traffic breakdown in free flow at highway bottlenecks. It is shown that the source of a nucleus for traffic breakdown is the solely difference between empirical spontaneous and induced traffic breakdowns at a highway bottleneck. Microscopic traffic simulations with a stochastic traffic flow model in the framework of three-phase theory explain the empirical findings. It turns out that in the most cases, a nucleus for empirical spontaneous traffic breakdown occurs through an interaction of one of waves in free flow with an empirical permanent speed disturbance localized at a highway bottleneck. The wave is a localized structure in free flow, in which the total flow rate is larger and the speed averaged across the highway is smaller than outside the wave. The waves in free flow appear due to oscilations in the percentage of slow vehicles; these waves propagate with the average speed of slow vehicles in free flow (about 85--88 km/h for German highways). Any of the waves exhibits a two-dimensional asymmetric spatiotemporal structure: Wave's characteristics are different in different highway lanes.
△ Less
Submitted 10 February, 2015;
originally announced February 2015.
