-
The Imaging Time-of-Propagation Detector at Belle II
Authors:
Hulya Atmacan,
Matt Belhorn,
Yinghui Guan,
Longke Li,
Bilas Pal,
Saurabh Sandilya,
Alan Schwartz,
Boqun Wang,
Shun Watanuki,
Matthew Andrew,
Matthew Barrett,
Martin Bessner,
Thomas Browder,
J. Bynes,
J. Cercillieux,
Shawn Dubey,
Oskar Hartbrich,
Chris Ketter,
Brian Kirby,
Shahab Kohani,
D. Kotchetkov,
Luca Macchiarulo,
B. Macek,
Kurtis Nishimura,
H. Purwar
, et al. (70 additional authors not shown)
Abstract:
We report on the construction, operation, and performance of the Time-of-Propagation detector with imaging used for the Belle II experiment running at the Super-KEKB $e^+e^-$ collider. This detector is located in the central barrel region and uses Cherenkov light to provide particle identification among hadrons. The Cherenkov light is radiated in highly polished bars of synthetic fused silica (qua…
▽ More
We report on the construction, operation, and performance of the Time-of-Propagation detector with imaging used for the Belle II experiment running at the Super-KEKB $e^+e^-$ collider. This detector is located in the central barrel region and uses Cherenkov light to provide particle identification among hadrons. The Cherenkov light is radiated in highly polished bars of synthetic fused silica (quartz) and transported to the ends of the bars via total internal reflection. One bar end is instrumented with finely segmented micro-channel-plate photomultiplier tubes to record the light, while the other end has a mirror attached to reflect the photons back to the instrumented end. Both the propagation times and hit positions of the Cherenkov photons are measured; these depend on the Cherenkov angle and together provide good discrimination among charged pions, kaons, and protons with momenta up to around 4 GeV/$c$. To date, the detector has been used to record and analyze over 400 fb$^{-1}$ of Belle II data.
△ Less
Submitted 26 April, 2025;
originally announced April 2025.
-
Experimental Studies on Spatial Resolution of a Delay-Line Current-Biased Kinetic-Inductance Detector
Authors:
The Dang Vu,
Hiroaki Shishido,
Kazuya Aizawa,
Takayuki Oku,
Kenichi Oikawa,
Masahide Harada,
Kenji M. Kojima,
Shigeyuki Miyajima,
Kazuhiko Soyama,
Tomio Koyama,
Mutsuo Hidaka,
Soh Y. Suzuki,
Manobu M. Tanaka,
Masahiko Machida,
Shuichi Kawamata,
Takekazu Ishida
Abstract:
A current-biased kinetic inductance detector (CB-KID) is a novel superconducting detector to construct a neutron transmission imaging system. The characteristics of a superconducting neutron detector have been systematically studied to improve spatial resolution of our CB-KID neutron detector. In this study, we investigated the distribution of spatial resolutions under different operating conditio…
▽ More
A current-biased kinetic inductance detector (CB-KID) is a novel superconducting detector to construct a neutron transmission imaging system. The characteristics of a superconducting neutron detector have been systematically studied to improve spatial resolution of our CB-KID neutron detector. In this study, we investigated the distribution of spatial resolutions under different operating conditions and examined the homogeneity of spatial resolutions in the detector in detail. We used a commercial standard Gd Siemens-star pattern as a conventional method to estimate the spatial resolution, and a lab-made 10B-dot array intended to examine detailed profiles on a distribution of spatial resolutions. We found that discrepancy in propagation velocities in the detector affected the uniformity of the spatial resolutions in neutron imaging. We analyzed the ellipsoidal line profiles along the circumferences of several different test circles in the Siemens-star image to find a distribution of spatial resolutions. Note that we succeeded in controlling the detector temperature precisely enough to realize stable propagation velocities of the signals in the detector to achieve the best spatial resolution with a delay-line CB-KID technique.
△ Less
Submitted 16 April, 2025;
originally announced April 2025.
-
Chained computerized adaptive testing for the Force Concept Inventory
Authors:
Jun-ichiro Yasuda,
Michael M. Hull,
Naohiro Mae,
Kentaro Kojima
Abstract:
Although conceptual assessment tests are frequently administered in a pre/post-semester fashion, there are inherent issues with this paradigm. Specifically, education researchers and instructors have limited ability to observe the progression of student conceptual understanding throughout the course. Furthermore, instructors are limited in the usefulness of the feedback they can give to the studen…
▽ More
Although conceptual assessment tests are frequently administered in a pre/post-semester fashion, there are inherent issues with this paradigm. Specifically, education researchers and instructors have limited ability to observe the progression of student conceptual understanding throughout the course. Furthermore, instructors are limited in the usefulness of the feedback they can give to the students involved. To address these issues, we propose the use of computerized adaptive testing (CAT) and increasing the frequency of CAT-based assessments during the course, while reducing the test length per administration, thus keeping or decreasing the total number of test items administered throughout the course. The feasibility of this idea depends on how far the test length per administration can be reduced without compromising the test accuracy and precision. Specifically, the overall test length is desired to be shorter than when the full assessment is administered as a pretest and subsequent post-test. To achieve this goal, we developed a CAT algorithm that we call Chain-CAT. This algorithm sequentially links the results of each CAT administration using collateral information. We developed the Chain-CAT algorithm using the items of the Force Concept Inventory (FCI) and analyzed the efficiency by numerical simulations. We found that collateral information significantly improved the test efficiency, and the overall test length could be shorter than the pre-post method. Without constraints for item balancing and exposure control, simulation results indicated that the efficiency of Chain-CAT is comparable to that of the pre-post method even if the length of each CAT administration is only 5 items and the CAT is administered 9 times throughout the semester. (To continue, see text.)
△ Less
Submitted 24 October, 2024;
originally announced October 2024.
-
Acceleration of positive muons by a radio-frequency cavity
Authors:
S. Aritome,
K. Futatsukawa,
H. Hara,
K. Hayasaka,
Y. Ibaraki,
T. Ichikawa,
T. Iijima,
H. Iinuma,
Y. Ikedo,
Y. Imai,
K. Inami,
K. Ishida,
S. Kamal,
S. Kamioka,
N. Kawamura,
M. Kimura,
A. Koda,
S. Koji,
K. Kojima,
A. Kondo,
Y. Kondo,
M. Kuzuba,
R. Matsushita,
T. Mibe,
Y. Miyamoto
, et al. (30 additional authors not shown)
Abstract:
Acceleration of positive muons from thermal energy to $100~$keV has been demonstrated. Thermal muons were generated by resonant multi-photon ionization of muonium atoms emitted from a sheet of laser-ablated aerogel. The thermal muons were first electrostatically accelerated to $5.7~$keV, followed by further acceleration to 100 keV using a radio-frequency quadrupole. The transverse normalized emitt…
▽ More
Acceleration of positive muons from thermal energy to $100~$keV has been demonstrated. Thermal muons were generated by resonant multi-photon ionization of muonium atoms emitted from a sheet of laser-ablated aerogel. The thermal muons were first electrostatically accelerated to $5.7~$keV, followed by further acceleration to 100 keV using a radio-frequency quadrupole. The transverse normalized emittance of the accelerated muons in the horizontal and vertical planes were $0.85 \pm 0.25 ~\rm{(stat.)}~^{+0.22}_{-0.13} ~\rm{(syst.)}~π~$mm$\cdot$mrad and $0.32\pm 0.03~\rm{(stat.)} ^{+0.05}_{-0.02} ~\rm{(syst.)}~π~$mm$\cdot$mrad, respectively. The measured emittance values demonstrated phase space reduction by a factor of $2.0\times 10^2$ (horizontal) and $4.1\times 10^2$ (vertical) allowing good acceleration efficiency. These results pave the way to realize the first-ever muon accelerator for a variety of applications in particle physics, material science, and other fields.
△ Less
Submitted 17 June, 2025; v1 submitted 15 October, 2024;
originally announced October 2024.
-
The Belle II Detector Upgrades Framework Conceptual Design Report
Authors:
H. Aihara,
A. Aloisio,
D. P. Auguste,
M. Aversano,
M. Babeluk,
S. Bahinipati,
Sw. Banerjee,
M. Barbero,
J. Baudot,
A. Beaubien,
F. Becherer,
T. Bergauer,
F. U. Bernlochner.,
V. Bertacchi,
G. Bertolone,
C. Bespin,
M. Bessner,
S. Bettarini,
A. J. Bevan,
B. Bhuyan,
M. Bona,
J. F. Bonis,
J. Borah,
F. Bosi,
R. Boudagga
, et al. (186 additional authors not shown)
Abstract:
We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive wit…
▽ More
We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive with the LHC and other experiments.
△ Less
Submitted 4 July, 2024; v1 submitted 26 June, 2024;
originally announced June 2024.
-
Linear Trimer Formation by Three-Center-Four-Electron Bonding in RuP
Authors:
Daigorou Hirai,
Keita Kojima,
Naoyuki Katayama,
Mitsuaki Kawamura,
Daisuke Nishio-Hamane,
Zenji Hiroi
Abstract:
In molecules like hydrogen, most chemical bonds are formed by sharing two electrons from each atom in the bonding molecular orbital (two-center-two-electron (2c2e) bonding). There are, however, different kinds of chemical bonding. The I3- molecule, for example, is noteworthy because three iodine atoms are linearly united by sharing four electrons (three-center-four-electron (3c4e) bonding). Some i…
▽ More
In molecules like hydrogen, most chemical bonds are formed by sharing two electrons from each atom in the bonding molecular orbital (two-center-two-electron (2c2e) bonding). There are, however, different kinds of chemical bonding. The I3- molecule, for example, is noteworthy because three iodine atoms are linearly united by sharing four electrons (three-center-four-electron (3c4e) bonding). Some inorganic solids undergo phase transitions that result in the formation of "molecules" in their crystalline frameworks, which are often accompanied by dramatic changes in physical properties; the metal-to-insulator transition (MIT) in vanadium dioxide, for example, occurs with the formation of dimer molecules with 2c2e bonding. We repot the creation of a linear ruthenium trimer with 3c4e bonding in ruthenium monopnictide at its MIT. Charge transfer from polymerized phosphorous to ruthenium produces this unusual molecule, with all conduction electrons trapped by the bonding molecular orbital. Our results demonstrate that molecules are crucial even in solid crystals as they impact their electronic properties.
△ Less
Submitted 2 September, 2023;
originally announced September 2023.
-
Orientation mapping of YbSn$_3$ single crystals based on Bragg-dip analysis using a delay-line superconducting sensor
Authors:
Hiroaki Shishido,
The Dang Vu,
Kazuya Aizawa,
Kenji M. Kojima,
Tomio Koyama,
Kenichi Oikawa,
Masahide Harada,
Takayuki Oku,
Kazuhiko Soyama,
Shigeyuki Miyajima,
Mutsuo Hidaka,
Soh Y. Suzuki,
Manobu M. Tanaka,
Shuichi Kawamata,
Takekazu Ishida
Abstract:
Recent progress in high-power pulsed neutron sources has stimulated the development of the Bragg-dip and Bragg-edge analysis methods using a two-dimensional neutron detector with high temporal resolution to resolve the neutron energy by the time-of-flight method. The delay-line current-biased kinetic-inductance detector (CB-KID) is a two-dimensional superconducting sensor with a high temporal reso…
▽ More
Recent progress in high-power pulsed neutron sources has stimulated the development of the Bragg-dip and Bragg-edge analysis methods using a two-dimensional neutron detector with high temporal resolution to resolve the neutron energy by the time-of-flight method. The delay-line current-biased kinetic-inductance detector (CB-KID) is a two-dimensional superconducting sensor with a high temporal resolution and multi-hit capability. We demonstrate that the delay-line CB-KID with a $^{10}$B neutron conversion layer can be applied to high-spatial-resolution neutron transmission imaging and spectroscopy up to 100\,eV. Dip structures in the transmission spectrum induced by Bragg diffraction and nuclear resonance absorption in YbSn$_3$ single crystals. We successfully drew the orientation mapping of YbSn$_3$ crystals based on the analysis of observed Bragg-dip positions in the transmission spectrum.
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
Measured and projected beam backgrounds in the Belle II experiment at the SuperKEKB collider
Authors:
A. Natochii,
T. E. Browder,
L. Cao,
G. Cautero,
S. Dreyer,
A. Frey,
A. Gabrielli,
D. Giuressi,
T. Ishibashi,
Y. Jin,
K. Kojima,
T. Kraetzschmar,
L. Lanceri,
Z. Liptak,
D. Liventsev,
C. Marinas,
L. Massaccesi,
K. Matsuoka,
F. Meier,
C. Miller,
H. Nakayama,
C. Niebuhr,
A. Novosel,
K. Parham,
I. Popov
, et al. (21 additional authors not shown)
Abstract:
The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model. SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reach a peak l…
▽ More
The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model. SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reach a peak luminosity of $\rm 6 \times 10^{35}~cm^{-2}s^{-1}$ by further increasing the beam currents and reducing the beam size at the interaction point by squeezing the betatron function down to $β^{*}_{\rm y}=\rm 0.3~mm$. To ensure detector longevity and maintain good reconstruction performance, beam backgrounds must remain well controlled. We report on current background rates in Belle II and compare these against simulation. We find that a number of recent refinements have significantly improved the background simulation accuracy. Finally, we estimate the safety margins going forward. We predict that backgrounds should remain high but acceptable until a luminosity of at least $\rm 2.8 \times 10^{35}~cm^{-2}s^{-1}$ is reached for $β^{*}_{\rm y}=\rm 0.6~mm$. At this point, the most vulnerable Belle II detectors, the Time-of-Propagation (TOP) particle identification system and the Central Drift Chamber (CDC), have predicted background hit rates from single-beam and luminosity backgrounds that add up to approximately half of the maximum acceptable rates.
△ Less
Submitted 11 December, 2023; v1 submitted 3 February, 2023;
originally announced February 2023.
-
Anti-Stokes Photoluminescence from CsPbBr3 Nanostructures Embedded in a Cs$_4$PbBr$_6$ Crystal
Authors:
Yuto Kajino,
Shuji Otake,
Takumi Yamada,
Kazunobu Kojima,
Tomoya Nakamura,
Atsushi,
Wakamiya,
Yoshihiko Kanemitsu,
Yasuhiro Yamada
Abstract:
Lead halide perovskites possess high photoluminescence (PL) efficiency and strong electron-phonon interactions, and therefore the optical cooling using up-conversion PL has been expected. We investigate anti-Stokes PL from green-luminescent Cs$_4$PbBr$_6$, whose origin is attributable to CsPbBr3 nanostructures embedded in a Cs$_4$PbBr$_6$ crystal. Because of the high transparency, low refractive i…
▽ More
Lead halide perovskites possess high photoluminescence (PL) efficiency and strong electron-phonon interactions, and therefore the optical cooling using up-conversion PL has been expected. We investigate anti-Stokes PL from green-luminescent Cs$_4$PbBr$_6$, whose origin is attributable to CsPbBr3 nanostructures embedded in a Cs$_4$PbBr$_6$ crystal. Because of the high transparency, low refractive index, and high stability of Cs$_4$PbBr$_6$, the green PL displays high external quantum efficiency without photo-degradation. Time-resolved PL spectroscopy reveals the excitonic behaviors in recombination process. The shape of the PL spectrum is almost independent of excitation photon energy, which means that the spectral width is determined by homogeneous broadening. We demonstrate that the phonon-assisted process dominates the Urbach tail of optical absorption and anti-Stokes PL at room temperature. Anti-Stokes PL is observed down to 70 K. We determine the temperature dependence of the Urbach energy and estimate the strength of the electron-phonon coupling. Our spectroscopic data show that CsPbBr3 nanostructures have potentially useful features for optical cooling.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
Beam background expectations for Belle II at SuperKEKB
Authors:
A. Natochii,
T. E. Browder,
L. Cao,
K. Kojima,
D. Liventsev,
F. Meier,
K. R. Nakamura,
H. Nakayama,
C. Niebuhr,
A. Novosel,
G. Rizzo,
S. Y. Ryu,
L. Santelj,
X. D. Shi,
S. Stefkova,
H. Tanigawa,
N. Taniguchi,
S. E. Vahsen,
L. Vitale,
Z. Wang
Abstract:
The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $\rm 50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model (BSM). SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reac…
▽ More
The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $\rm 50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model (BSM). SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reach a peak luminosity of $\rm 6.3 \times 10^{35}~cm^{-2}s^{-1}$ by further increasing the beam currents and reducing the beam-size at the interaction point by squeezing the betatron function down to $β^{*}_{\rm y}=\rm 0.3~mm$. Beam backgrounds are a key challenge in this context. We estimate the expected background evolution in the next ten years and discuss potential challenges and background mitigation strategies. We find that backgrounds will remain high but acceptable until a luminosity of at least $\rm 2.8\times 10^{35}~cm^{-2}s^{-1}$ is reached at $β^{*}_{\rm y}=\rm 0.6~mm$. Beyond this luminosity, predictions are highly uncertain, owing to a planned redesign of the interaction region. Improved background estimates with reduced uncertainties for the final, maximum-luminosity operation will require completion of this redesign.
△ Less
Submitted 7 August, 2022; v1 submitted 10 March, 2022;
originally announced March 2022.
-
Line-field Coherent Sensing with LED Illumination
Authors:
Celalettin Yurdakul,
David S. Millar,
Hassan Mansour,
Pu Wang,
Keisuke Kojima,
Toshiaki Koike-Akino,
Kieran Parsons,
Philip V. Orlik
Abstract:
We describe a method of low-coherence interferometry based optical profilometry using standard light-emitting diode (LED) illumination and complementary metal-oxide-semiconductor (CMOS) image sensors. A line-field illumination strategy allows for the simultaneous measurement of many points in space. Micron scale accuracy and resolution are achieved and demonstrated using a variety of targets.
We describe a method of low-coherence interferometry based optical profilometry using standard light-emitting diode (LED) illumination and complementary metal-oxide-semiconductor (CMOS) image sensors. A line-field illumination strategy allows for the simultaneous measurement of many points in space. Micron scale accuracy and resolution are achieved and demonstrated using a variety of targets.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
High Spatial Resolution Neutron Transmission Imaging Using a Superconducting Two-Dimensional Detector
Authors:
Hiroaki Shishido,
Kazuma Nishimura,
The Dang Vu,
Kazuya Aizawa,
Kenji M. Kojima,
Tomio Koyama,
Kenichi Oikawa,
Masahide Harada,
Takayuki Oku,
Kazuhiko Soyama,
Shigeyuki Miyajima,
Mutsuo Hidaka,
Soh Y. Suzuki,
Manobu M. Tanaka,
Shuichi Kawamata,
Takekazu Ishida
Abstract:
Neutron imaging is one of the most powerful tools for nondestructive inspection owing to the unique characteristics of neutron beams, such as high permeability for many heavy metals, high sensitivity for certain light elements, and isotope selectivity owing to a specific nuclear reaction between an isotope and neutrons. In this study, we employed a superconducting detector, current-biased kinetic-…
▽ More
Neutron imaging is one of the most powerful tools for nondestructive inspection owing to the unique characteristics of neutron beams, such as high permeability for many heavy metals, high sensitivity for certain light elements, and isotope selectivity owing to a specific nuclear reaction between an isotope and neutrons. In this study, we employed a superconducting detector, current-biased kinetic-inductance detector (CB-KID) for neutron imaging using a pulsed neutron source. We employed the delay-line method, and high spatial resolution imaging with only four reading channels was achieved. We also performed wavelength-resolved neutron imaging by the time-of-flight method for the pulsed neutron source. We obtained the neutron transmission images of a Gd-Al alloy sample, inside which single crystals of GdAl3 were grown, using the delay-line CB-KID. Single crystals were well imaged, in both shapes and distributions, throughout the Al-Gd alloy. We identified Gd nuclei via neutron transmissions that exhibited characteristic suppression above the neutron wavelength of 0.03 nm. In addition, the ^{155}Gd resonance dip, a dip structure of the transmission caused by the nuclear reaction between an isotope and neutrons, was observed even when the number of events was summed over a limited area of 15 X 12 um^2. Gd selective imaging was performed using the resonance dip of ^{155}Gd, and it showed clear Gd distribution even with a limited neutron wavelength range of 1 pm.
△ Less
Submitted 8 October, 2021;
originally announced October 2021.
-
Slow dynamics of disordered zigzag chain molecules in layered LiVS2 under electron irradiation
Authors:
Naoyuki Katayama,
Keita Kojima,
Tomoki Yamaguchi,
Sosuke Hattori,
Shinya Tamura,
Koji Ohara,
Shintaro Kobayashi,
Koudai Sugimoto,
Yukinori Ohta,
Koh Saitoh,
Hiroshi Sawa
Abstract:
Electronic instabilities in transition metal compounds often spontaneously form orbital molecules, which consist of orbital-coupled metal ions at low temperature. Recent local structural studies utilizing the pair distribution function revealed that preformed orbital molecules appear disordered even in the high-temperature paramagnetic phase. However, it is unclear whether preformed orbital molecu…
▽ More
Electronic instabilities in transition metal compounds often spontaneously form orbital molecules, which consist of orbital-coupled metal ions at low temperature. Recent local structural studies utilizing the pair distribution function revealed that preformed orbital molecules appear disordered even in the high-temperature paramagnetic phase. However, it is unclear whether preformed orbital molecules are dynamic or static. Here, we provide clear experimental evidence of the slow dynamics of disordered orbital molecules realized in the high-temperature paramagnetic phase of LiVS2, which exhibits vanadium trimerization upon cooling below 314 K. Unexpectedly, the preformed orbital molecules appear as a disordered zigzag chain that fluctuate in both time and space under electron irradiation. Our findings should advance studies on soft matter physics realized in an inorganic material due to disordered orbital molecules.
△ Less
Submitted 19 February, 2021;
originally announced February 2021.
-
Homogeneity of neutron transmission imaging over a large sensitive area with a four-channel superconducting detector
Authors:
The Dang Vu,
Hiroaki Shishido,
Kenji M. Kojima,
Tomio Koyama,
Kenichi Oikawa,
Masahide Harada,
Shigeyuki Miyajima,
Takayuki Oku,
Kazuhiko Soyama,
Kazuya Aizawa,
Mutsuo Hidaka,
Soh Y. Suzuki,
Manobu M. Tanaka,
Alex Malins,
Masahiko Machida,
Takekazu Ishida
Abstract:
We previously proposed a method to detect neutrons by using a current-biased kinetic inductance detector (CB-KID), where neutrons are converted into charged particles using a 10B conversion layer. The charged particles are detected based on local changes in kinetic inductance of X and Y superconducting meanderlines under a modest DC bias current. The system uses a delay-line method to locate the p…
▽ More
We previously proposed a method to detect neutrons by using a current-biased kinetic inductance detector (CB-KID), where neutrons are converted into charged particles using a 10B conversion layer. The charged particles are detected based on local changes in kinetic inductance of X and Y superconducting meanderlines under a modest DC bias current. The system uses a delay-line method to locate the positions of neutron-10B reactions by acquiring the four arrival timestamps of signals that propagate from hot spots created by a passing charged particle to the end electrodes of the meanderlines. Unlike conventional multi-pixel imaging systems, the CB-KID system performs high spatial resolution imaging over a 15 mm x 15 mm sensitive area using only four channel readouts. Given the large sensitive area, it is important to check the spatial homogeneity and linearity of detected neutron positions when imaging with CB-KID. To this end we imaged a pattern of 10B dot absorbers with a precise dot pitch to investigate the spatial homogeneity of the detector. We confirmed the spatial homogeneity of detected dot positions based on the distribution of measured dot pitches across the sensitive area of the detector. We demonstrate potential applications of the system by taking a clear transmission image of tiny metallic screws and nuts and a ladybug. The image was useful for characterizing the ladybug noninvasively. Detection efficiencies were low when the detector was operated at 4 K, so we plan to explore raising the operating temperature towards the critical temperature of the detector as a means to improve counting rates.
△ Less
Submitted 14 October, 2020;
originally announced October 2020.
-
New precise spectroscopy of the hyperfine structure in muonium with a high-intensity pulsed muon beam
Authors:
S. Kanda,
Y. Fukao,
Y. Ikedo,
K. Ishida,
M. Iwasaki,
D. Kawall,
N. Kawamura,
K. M. Kojima,
N. Kurosawa,
Y. Matsuda,
T. Mibe,
Y. Miyake,
S. Nishimura,
N. Saito,
Y. Sato,
S. Seo,
K. Shimomura,
P. Strasser,
K. S. Tanaka,
T. Tanaka,
H. A. Torii,
A. Toyoda,
Y. Ueno
Abstract:
A hydrogen-like atom consisting of a positive muon and an electron is known as muonium. It is a near-ideal two-body system for a precision test of bound-state theory and fundamental symmetries. The MuSEUM collaboration performed a new precision measurement of the muonium ground-state hyperfine structure at J-PARC using a high-intensity pulsed muon beam and a high-rate capable positron counter. The…
▽ More
A hydrogen-like atom consisting of a positive muon and an electron is known as muonium. It is a near-ideal two-body system for a precision test of bound-state theory and fundamental symmetries. The MuSEUM collaboration performed a new precision measurement of the muonium ground-state hyperfine structure at J-PARC using a high-intensity pulsed muon beam and a high-rate capable positron counter. The resonance of hyperfine transition was successfully observed at a near-zero magnetic field, and the muonium hyperfine structure interval of $ν_{\text{HFS}}$ = 4.463302(4) GHz was obtained with a relative precision of 0.9 ppm. The result was consistent with the previous ones obtained at Los Alamos National Laboratory and the current theoretical calculation. We present a demonstration of the microwave spectroscopy of muonium for future experiments to achieve the highest precision.
△ Less
Submitted 2 March, 2021; v1 submitted 13 April, 2020;
originally announced April 2020.
-
Generative Deep Learning Model for a Multi-level Nano-Optic Broadband Power Splitter
Authors:
Yingheng Tang,
Keisuke Kojima,
Toshiaki Koike-Akino,
Ye Wang,
Pengxiang Wu,
Mohammad Tahersima,
Devesh K. Jha,
Kieran Parsons,
Minghao Qi
Abstract:
We propose a novel Conditional Variational Autoencoder (CVAE) model, enhanced with adversarial censoring and active learning, for the generation of 550 nm broad bandwidth (1250 nm to 1800 nm) power splitters with arbitrary splitting ratio. The device footprint is 2.25 x 2.25 μ m2 with a 20 x 20 etched hole combination. It is the first demonstration to apply the CVAE model and the adversarial censo…
▽ More
We propose a novel Conditional Variational Autoencoder (CVAE) model, enhanced with adversarial censoring and active learning, for the generation of 550 nm broad bandwidth (1250 nm to 1800 nm) power splitters with arbitrary splitting ratio. The device footprint is 2.25 x 2.25 μ m2 with a 20 x 20 etched hole combination. It is the first demonstration to apply the CVAE model and the adversarial censoring for the photonics problems. We confirm that the optimized device has an overall performance close to 90% across all bandwidths from 1250 nm to 1800 nm. To the best of our knowledge, this is the smallest broadband power splitter with arbitrary ratio.
△ Less
Submitted 8 March, 2020;
originally announced March 2020.
-
Energy-resolved neutron imaging with high spatial resolution using a superconducting delay-line kinetic inductance detector
Authors:
Yuki Iizawa,
Hiroaki Shishido,
Kazuma Nishimura,
The Dang Vu,
Kenji M. Kojima,
Tomio Koyama,
Kenichi Oikawa,
Masahide Harada,
Shigeyuki Miyajima,
Mutsuo Hidaka,
Takayuki Oku,
Kazuhiko Soyama,
Kazuya Aizawa,
Soh Y. Suzuki,
Takekazu Ishida
Abstract:
Neutron imaging is one of the key technologies for non-destructive transmission testing. Recent progress in the development of intensive neutron sources allows us to perform energy-resolved neutron imaging with high spatial resolution. Substantial efforts have been devoted to developing a high spatial and temporal resolution neutron imager. We have been developing a neutron imager aiming at conduc…
▽ More
Neutron imaging is one of the key technologies for non-destructive transmission testing. Recent progress in the development of intensive neutron sources allows us to perform energy-resolved neutron imaging with high spatial resolution. Substantial efforts have been devoted to developing a high spatial and temporal resolution neutron imager. We have been developing a neutron imager aiming at conducting high spatial and temporal resolution imaging based on a delay-line neutron detector, called the current-biased kinetic-inductance detector, with a conversion layer $^{10}$B. The detector allowed us to obtain a neutron transmission image with four signal readout lines. Herein, we expanded the sensor active area, and improved the spatial resolution of the detector. We examined the capability of high spatial resolution neutron imaging over the sensor active area of 15 $\times$ 15 mm$^2$ for various samples, including biological and metal ones. We also demonstrated an energy-resolved neutron image in which stainless-steel specimens were discriminating of other specimens with the aid of the Bragg edge transmission.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Deep Neural Network Inverse Design of Integrated Nanophotonic Devices
Authors:
Mohammad H. Tahersima,
Keisuke Kojima,
Toshiaki Koike-Akino,
Devesh Jha,
Bingnan Wang,
Chungwei Lin,
Kieran Parsons
Abstract:
Predicting physical response of an artificially structured material is of particular interest for scientific and engineering applications. Here we use deep learning to predict optical response of artificially engineered nanophotonic devices. In addition to predicting forward approximation of transmission response for any given topology, this approach allows us to inversely approximate designs for…
▽ More
Predicting physical response of an artificially structured material is of particular interest for scientific and engineering applications. Here we use deep learning to predict optical response of artificially engineered nanophotonic devices. In addition to predicting forward approximation of transmission response for any given topology, this approach allows us to inversely approximate designs for a targeted optical response. Our Deep Neural Network (DNN) could design compact (2.6x2.6 μm2) silicon-on-insulator (SOI)-based 1 X 2 power splitters with various target splitting ratios in a fraction of a second. This model is trained to minimize the reflection (smaller than 20 dB) while achieving maximum transmission efficiency (above 90%) and target splitting specifications. This approach paves the way for rapid design of integrated photonic components relying on complex nanostructures.
△ Less
Submitted 10 September, 2018;
originally announced September 2018.
-
Realization of a resonant non-linear phase flip in cavity quantum electrodynamics
Authors:
Holger F. Hofmann,
Kunihiro Kojima,
Shigeki Takeuchi,
Keiji Sasaki
Abstract:
Optical nonlinearities sensitive to individual photons may be extremely useful as elements in quantum logic circuits for photonic qubits. A much cited example is the work of Turchette et al. [Phys. Rev. Lett. 75, 4710 (1995)], in which a phase shift of about 10 degrees was reported. To improve this result, we propose a single sided cavity geometry with minimal cavity losses. It should then be po…
▽ More
Optical nonlinearities sensitive to individual photons may be extremely useful as elements in quantum logic circuits for photonic qubits. A much cited example is the work of Turchette et al. [Phys. Rev. Lett. 75, 4710 (1995)], in which a phase shift of about 10 degrees was reported. To improve this result, we propose a single sided cavity geometry with minimal cavity losses. It should then be possible to achieve a nonlinear phase shift of 180 degrees.
△ Less
Submitted 27 September, 2002;
originally announced September 2002.
-
Optimized phase switching using a single atom nonlinearity
Authors:
Holger F. Hofmann,
Kunihiro Kojima,
Shigeki Takeuchi,
Keiji Sasaki
Abstract:
We show that a nonlinear phase shift of pi can be obtained by using a single two level atom in a one sided cavity with negligible losses. This result implies that the use of a one sided cavity can significantly improve the pi/18 phase shift previously observed by Turchette et al. [Phys. Rev. Lett. 75, 4710 (1995)].
We show that a nonlinear phase shift of pi can be obtained by using a single two level atom in a one sided cavity with negligible losses. This result implies that the use of a one sided cavity can significantly improve the pi/18 phase shift previously observed by Turchette et al. [Phys. Rev. Lett. 75, 4710 (1995)].
△ Less
Submitted 17 March, 2003; v1 submitted 6 August, 2002;
originally announced August 2002.
-
Isotropic photonic band gap and anisotropic structures in transmission spectra of two-dimensional 5-fold and 8-fold symmetric quasiperiodic photonic crystals
Authors:
Masashi Hase,
Hiroshi Miyazaki,
Mitsuru Egashira,
Norio Shinya,
Kenji M. Kojima,
Shin-ichi Uchida
Abstract:
We measured and calculated transmission spectra of two-dimensional quasiperiodic photonic crystals (PCs) based on a 5-fold (Penrose) or 8-fold (octagonal) symmetric quasiperiodic pattern. The photonic crystal consisted of dielectric cylindrical rods in air placed normal to the basal plane on vertices of tiles composing the quasiperiodic pattern. An isotropic photonic band gap (PBG) appeared in t…
▽ More
We measured and calculated transmission spectra of two-dimensional quasiperiodic photonic crystals (PCs) based on a 5-fold (Penrose) or 8-fold (octagonal) symmetric quasiperiodic pattern. The photonic crystal consisted of dielectric cylindrical rods in air placed normal to the basal plane on vertices of tiles composing the quasiperiodic pattern. An isotropic photonic band gap (PBG) appeared in the TM mode, where electric fields were parallel to the rods, even when the real part of a dielectric constant of the rod was as small as 2.4. An isotropic PBG-like dip was seen in tiny Penrose and octagonal PCs with only 6 and 9 rods, respectively. These results indicate that local multiple light scattering within the tiny PC plays an important role in the PBG formation. Besides the isotropic PBG, we found dips depending on the incident angle of the light. This is the first report of anisotropic structures clearly observed in transmission spectra of quasiperiodic PCs. Based on rod-number and rod-arrangement dependence, it is thought that the shapes and positions of the anisotropic dips are determined by global multiple light scattering covering the whole system. In contrast to the isotropic PBG due to local light scattering, we could not find any PBGs due to global light scattering even though we studied transmission spectra of a huge Penrose PC with 466 rods.
△ Less
Submitted 22 March, 2002;
originally announced March 2002.
