Radiative characterization of supersonic jets and shocks in a laser-plasma experiment
Authors:
H Bohlin,
F-E Brack,
M Cervenak,
T Chodukowski,
J Cikhardt,
J Dostál,
R Dudžák,
J. Hubner,
W Huo,
S Jelinek,
D Klír,
F Kroll,
M Krupka,
M Krůs,
T Pisarczyk,
Z Rusiniak,
T Schlegel,
U. Schramm,
T-H Nguyen-Bui,
S Weber,
A Zaraś-Szydłowska,
K Zeil,
D Kumar,
V Tikhonchuk
Abstract:
The interaction of supersonic laser-generated plasma jets with a secondary gas target was studied experimentally. The plasma parameters of the jet, and the resulting shock, were characterized using a combination of multi-frame interferometry/shadowgraphy, and X-ray diagnostics, allowing for a detailed study of their structure and evolution. The velocity was obtained with an X-ray streak camera, an…
▽ More
The interaction of supersonic laser-generated plasma jets with a secondary gas target was studied experimentally. The plasma parameters of the jet, and the resulting shock, were characterized using a combination of multi-frame interferometry/shadowgraphy, and X-ray diagnostics, allowing for a detailed study of their structure and evolution. The velocity was obtained with an X-ray streak camera, and filtered X-ray pinhole imaging was used to infer the electron temperature of the jet and shock. The topology of the ambient plasma density was found to have a significant effect on the jet and shock formation, as well as on their radiation characteristics. The experimental results were compared with radiation hydrodynamic simulations, thereby providing further insights into the underlying physical processes of the jet and shock formation and evolution.
△ Less
Submitted 21 January, 2021; v1 submitted 24 September, 2020;
originally announced September 2020.
The Study of a Fibre Z-Pinch
Authors:
Daniel Klir
Abstract:
This thesis presents the results of fibre Z-pinch experiments carried out on the Z-150 device at the CTU in Prague. The generator that was used to drive the experiments consisted of one capacitor of 3e-6 F capacitance. In the case of 20 kV charging voltage, the current was peaking at 80 kA with a 850 ns quarter period. The Z-pinch was formed from carbon fibres of 15 micrometer diameter and 1 cm…
▽ More
This thesis presents the results of fibre Z-pinch experiments carried out on the Z-150 device at the CTU in Prague. The generator that was used to drive the experiments consisted of one capacitor of 3e-6 F capacitance. In the case of 20 kV charging voltage, the current was peaking at 80 kA with a 850 ns quarter period. The Z-pinch was formed from carbon fibres of 15 micrometer diameter and 1 cm length. The discharge was observed by a large number of diagnostic tools. This comprehensive set of diagnostics enabled us to describe the gross dynamics of the Z-pinch. It was found out that after the breakdown a low density coronal plasma was formed while the fibre diameter remained almost unchanged. This low density corona was carrying almost all the current of the order of 10 kA. When the current had built up, the implosion of the corona onto the central fibre occurred. The implosion velocity approached the value of 2e5 m/s. When the imploded corona had reached the fibre, the dip in dI/dt, voltage peak up to 10 kV, and XUV pulse of a 10-30 ns width were observed. XUV radiation was emitted from several bright spots which corresponded to the interaction of m=0 instability necks with the dense core. The electron temperature and density were approximately 80 eV and 10e25 per cubic meter, respectively. Although the presence of a fibre did not significantly suppress MHD instabilities, they were not disruptive. After the fibre ablation, i.e. after 500 ns, material evaporated from electrodes started to play a dominant role. The observed plasma column seemed to be MHD unstable and when m=0 instabilities had developed, X-ray pulses were emitted from several hot spots, particularly near the anode. At that time the voltage peak of up to 30 kV was detected.
△ Less
Submitted 23 March, 2007; v1 submitted 22 March, 2007;
originally announced March 2007.
