Showing 1–50 of 51 results for author: King, M

Dynamical symmetries in laser harmonic generation via a cubic nonlinearity

Authors: Raoul Trines, Holger Schmitz, Martin King, Paul McKenna, Robert Bingham

Abstract: In our earlier work on harmonic generation with complex light [Nature Communications 15, 6878 (2024)], we demonstrated how the harmonic spectrum of a complex laser beam in a nonlinear medium can be obtained through the judicious application of the ``beat wave'' concept. In this paper, we show how the same results can be obtained via the full set of symmetries of the initial laser-target configurat… ▽ More In our earlier work on harmonic generation with complex light [Nature Communications 15, 6878 (2024)], we demonstrated how the harmonic spectrum of a complex laser beam in a nonlinear medium can be obtained through the judicious application of the ``beat wave'' concept. In this paper, we show how the same results can be obtained via the full set of symmetries of the initial laser-target configuration, and how this can be reconciled with the ``beat wave'' approach. We also highlight the connections between our work and existing theory for diffraction of EM waves from crystals: Laue equations, Mathieu equation, and theorems by Noether, Floquet and Bloch. The specific nature of our approach to harmonic spectra allows these connections to be revealed. We illustrate this with numerous examples taken from existing literature to show the wide applicability of our approach. △ Less

Submitted 11 July, 2025; originally announced July 2025.

Comments: 29 pages, 3 figures

Spatial and Temporal Evaluations of the Liquid Argon Purity in ProtoDUNE-SP

Authors: DUNE Collaboration, S. Abbaslu, A. Abed Abud, R. Acciarri, L. P. Accorsi, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, C. Adriano, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos, M. Andreotti , et al. (1301 additional authors not shown)

Abstract: Liquid argon time projection chambers (LArTPCs) rely on highly pure argon to ensure that ionization electrons produced by charged particles reach readout arrays. ProtoDUNE Single-Phase (ProtoDUNE-SP) was an approximately 700-ton liquid argon detector intended to prototype the Deep Underground Neutrino Experiment (DUNE) Far Detector Horizontal Drift module. It contains two drift volumes bisected by… ▽ More Liquid argon time projection chambers (LArTPCs) rely on highly pure argon to ensure that ionization electrons produced by charged particles reach readout arrays. ProtoDUNE Single-Phase (ProtoDUNE-SP) was an approximately 700-ton liquid argon detector intended to prototype the Deep Underground Neutrino Experiment (DUNE) Far Detector Horizontal Drift module. It contains two drift volumes bisected by the cathode plane assembly, which is biased to create an almost uniform electric field in both volumes. The DUNE Far Detector modules must have robust cryogenic systems capable of filtering argon and supplying the TPC with clean liquid. This paper will explore comparisons of the argon purity measured by the purity monitors with those measured using muons in the TPC from October 2018 to November 2018. A new method is introduced to measure the liquid argon purity in the TPC using muons crossing both drift volumes of ProtoDUNE-SP. For extended periods on the timescale of weeks, the drift electron lifetime was measured to be above 30 ms using both systems. A particular focus will be placed on the measured purity of argon as a function of position in the detector. △ Less

Submitted 11 July, 2025; originally announced July 2025.

Report number: CERN-EP-2025-157, FERMILAB-PUB-25-0445-V

Abstraction, Explanation, and Effective Field Theories

Authors: Martin King

Abstract: Effective field theories (EFTs) are widely considered by physicists to be explanatory and to be the appropriate frameworks for modelling various phenomena at different scales. At the same time, they are known to be approximate, restricted, and merely effective, and thus, examining them can provide a means of getting traction on philosophical issues such as idealisation, abstraction, and the veridi… ▽ More Effective field theories (EFTs) are widely considered by physicists to be explanatory and to be the appropriate frameworks for modelling various phenomena at different scales. At the same time, they are known to be approximate, restricted, and merely effective, and thus, examining them can provide a means of getting traction on philosophical issues such as idealisation, abstraction, and the veridicality of representations in explanation. This paper casts EFTs as \textit{abstract} models of a more fundamental theory that retain all and only the relevant aspects for a given explanandum. I describe abstraction as a process that can preserve explanation top-down from an independently explanatory fundamental theory to an effective theory. Thus the paper aims to show how abstract models, like EFTs, can function as explanatory stand-ins for more fundamental models, something often taken to be unproblematic. △ Less

Submitted 4 July, 2025; originally announced July 2025.

Experiment and the Pursuit of Ugly Models

Authors: Martin King

Abstract: Scientists do not merely choose to accept fully formed theories, they also have to decide which models to work on before they are fully developed and tested. Since decisive empirical evidence in favour of a model will not yet have been gathered, other criteria must play determining roles. I examine the case of modern high-energy physics where the experimental context that once favoured the pursuit… ▽ More Scientists do not merely choose to accept fully formed theories, they also have to decide which models to work on before they are fully developed and tested. Since decisive empirical evidence in favour of a model will not yet have been gathered, other criteria must play determining roles. I examine the case of modern high-energy physics where the experimental context that once favoured the pursuit of beautiful, simple, and general theories now favours the pursuit of models that are ad hoc, narrow in scope, and complex; in short, ugly models. The lack of new discoveries since the Higgs boson, together with the lack of a new higher energy collider, has left searches for new physics conceptually and empirically wide open. Physicists must make use of the experiment at hand while also creatively exploring alternatives that have not yet been explored. This encourages the pursuit of models that have at least one of two key features: i) they take radically novel approaches, or ii) are easily testable. I present four cases, neutralino dark matter, the relaxion, repulsive gravity, and models of lepton flavour universality violation, and show that even if they do not exhibit traditional epistemic virtues, they are nonetheless pursuitworthy. I argue that experimental context strongly determines pursuitworthiness and I lay out the conditions under which experiment encourages the pursuit of ugly models. △ Less

Submitted 4 July, 2025; originally announced July 2025.

Deep Learning and Model Independence

Authors: Martin King

Abstract: The lack of evidence in favor of any new physics models means that the search for new physics beyond the Standard Model (BSM) is wide open, with no direction clearly more promising than any other. This marks a turn towards what can be called `model-independent' methods-strategies that reduce the influence of modelling assumptions by performing minimally-biased precision measurements, using effecti… ▽ More The lack of evidence in favor of any new physics models means that the search for new physics beyond the Standard Model (BSM) is wide open, with no direction clearly more promising than any other. This marks a turn towards what can be called `model-independent' methods-strategies that reduce the influence of modelling assumptions by performing minimally-biased precision measurements, using effective field theories, or using Deep Learning methods (DL). In this paper, I present the novel and promising uses of DL as a primary tool in high energy physics research, highlighting the use of autoencoder networks and unsupervised learning methods. I advocate for the importance and usefulness of the concept of model independence and propose a definition that recognizes that independence of models is not absolute, but comes in degrees. △ Less

Submitted 4 July, 2025; originally announced July 2025.

First-passage time to capture for diffusion in a 3D harmonic potential

Authors: Tianyu Yuan, Ivan Surovtsev, Megan C. King, Simon G. J. Mochrie

Abstract: We determine the survival probability and first-passage time (FPT) to capture for a harmonically trapped particle, diffusing outside an absorbing spherical boundary by directly solving the differential equation for the survival probability. This solution, obtained as an infinite sum over the relevant eigenfunctions, corrects previously published results [D. S. Grebenkov, J. Phys. A 48, 013001 (201… ▽ More We determine the survival probability and first-passage time (FPT) to capture for a harmonically trapped particle, diffusing outside an absorbing spherical boundary by directly solving the differential equation for the survival probability. This solution, obtained as an infinite sum over the relevant eigenfunctions, corrects previously published results [D. S. Grebenkov, J. Phys. A 48, 013001 (2014)]. To verify our calculations, we perform simulations of the survival probability, that accurately reproduce the analytic solutions for a range of parameter values. We then obtain the corresponding FPT distribution as the negative time derivative of the survival probability. Finally, we derive an expression for mean first-passage time (MFPT), also as a sum over eigenfunctions. Numerical evaluation of the first twenty-five terms in this sum closely matches the MFPT obtained by a different method in D. S. Grebenkov, J. Phys. A 48, 013001 (2014). We also find that, in the limit of vanishing trap stiffness, the amplitude of the first term in our infinite-sum solution for the survival probability matches the theoretical escape probability for the potential-free diffusion-to-capture process. △ Less

Submitted 17 June, 2025; originally announced June 2025.

Comments: 7 pages, 4 figures

European Contributions to Fermilab Accelerator Upgrades and Facilities for the DUNE Experiment

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase o… ▽ More The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase of the project with a 1.2 MW neutrino beam. Construction of this first phase is well underway. For DUNE Phase II, this will be closely followed by an upgrade of the beam power to > 2 MW, for which the European groups again have a key role and which will require the continued support of the European community for machine aspects of neutrino physics. Beyond the neutrino beam aspects, LBNF is also responsible for providing unique infrastructure to install and operate the DUNE neutrino detectors at FNAL and at the Sanford Underground Research Facility (SURF). The cryostats for the first two Liquid Argon Time Projection Chamber detector modules at SURF, a contribution of CERN to LBNF, are central to the success of the ongoing execution of DUNE Phase I. Likewise, successful and timely procurement of cryostats for two additional detector modules at SURF will be critical to the success of DUNE Phase II and the overall physics program. The DUNE Collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This paper is being submitted to the 'Accelerator technologies' and 'Projects and Large Experiments' streams. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and DUNE software and computing, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

DUNE Software and Computing Research and Development

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing res… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing resources, and successful research and development of software (both infrastructure and algorithmic) in order to achieve these scientific goals. This submission discusses the computing resources projections, infrastructure support, and software development needed for DUNE during the coming decades as an input to the European Strategy for Particle Physics Update for 2026. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Computing' stream focuses on DUNE software and computing. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

The DUNE Phase II Detectors

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the previous European Strategy for Particle Physics. The construction of DUNE Phase I is well underway. DUNE Phase II consists of a third and fourth far detector module, an upgraded near detector complex, and an enhanced > 2 MW beam. The fourth FD module is conceived as a 'Module of Opportunity', aimed at supporting the core DUNE science program while also expanding the physics opportunities with more advanced technologies. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Detector instrumentation' stream focuses on technologies and R&D for the DUNE Phase II detectors. Additional inputs related to the DUNE science program, DUNE software and computing, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 29 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

Computational refocusing in phase-resolved confocal microscopy

Authors: Martin Schnell, Melanie King, Sam Buercklin, Paulo Sarriugarte, Rainer Hillenbrand, P. Scott Carney

Abstract: We demonstrate numerical refocusing in coherent confocal laser scanning microscopy based on synthetic optical holography. This physics-based approach implements a computational propagation on the complex signal recovered in synthetic holography consistent with the wave physics and the parameters of the microscope. An experimental demonstration is shown to restore an in-focus image of a test object… ▽ More We demonstrate numerical refocusing in coherent confocal laser scanning microscopy based on synthetic optical holography. This physics-based approach implements a computational propagation on the complex signal recovered in synthetic holography consistent with the wave physics and the parameters of the microscope. An experimental demonstration is shown to restore an in-focus image of a test object from data acquired at several focal plane off-sets. Numerical refocusing can provide focused views on samples with large height variation with a potential application in confocal optical surface profiling. △ Less

Submitted 12 November, 2024; originally announced November 2024.

Comments: 5 pages, 4 figures. \c{opyright} 2023 Optica Publishing Group. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modifications of the content of this paper are prohibited

Journal ref: Opt. Lett. 48, 4424-4427 (2023)

A tuneable frequency comb via dual-beam laser-solid harmonic generation

Authors: Raoul Trines, Holger Schmitz, Martin King, Paul McKenna, Robert Bingham

Abstract: A high-power laser pulse at normal incidence onto a plane solid target will generate odd harmonics of its frequency. However, the spacing of the harmonic lines in this configuration is fixed. Here, we study harmonic generation using two laser beams incident on a plane target at small, opposite angles to the target normal, via particle-in-cell simulations. When looking at the harmonic radiation in… ▽ More A high-power laser pulse at normal incidence onto a plane solid target will generate odd harmonics of its frequency. However, the spacing of the harmonic lines in this configuration is fixed. Here, we study harmonic generation using two laser beams incident on a plane target at small, opposite angles to the target normal, via particle-in-cell simulations. When looking at the harmonic radiation in a specific direction via a narrow slit or pinhole, we select an angle-dependent subset of the harmonic spectrum. This way, we obtain a harmonic frequency comb that we control via the observation angle and the input laser frequency. The spectra for s- and p-polarised harmonics are studied separately, as they offer different frequency combs. The divergence of the harmonic radiation will be reduced by using wider laser spots, thus increasing the efficacy of the scheme. We will discuss extensions to this scheme, such as using beams with unequal frequencies, a slight tilt of the target, or employing more than two beams. △ Less

Submitted 17 January, 2025; v1 submitted 4 October, 2024; originally announced October 2024.

Comments: 10 pages, 5 figures. This version adds a description of the p-polarised harmonic spectrum, in addition to the s-polarised spectrum

Measurements of Pion and Muon Nuclear Capture at Rest on Argon in the LArIAT Experiment

Authors: M. A. Hernandez-Morquecho, R. Acciarri, J. Asaadi, M. Backfish, W. Badgett, V. Basque, F. d. M. Blaszczyk, W. Foreman, R. Gomes, E. Gramellini, J. Ho, E. Kearns, E. Kemp, T. Kobilarcik, M. King, B. R. Littlejohn, X. Luo, A. Marchionni, C. A. Moura, J. L. Raaf, D. W. Schmitz, M. Soderberg, J. M. St. John, A. M. Szelc, T. Yang

Abstract: We report the measurement of the final-state products of negative pion and muon nuclear capture at rest on argon by the LArIAT experiment at the Fermilab Test Beam Facility. We measure a population of isolated MeV-scale energy depositions, or blips, in 296 LArIAT events containing tracks from stopping low-momentum pions and muons. The average numbers of visible blips are measured to be 0.74 $\pm$… ▽ More We report the measurement of the final-state products of negative pion and muon nuclear capture at rest on argon by the LArIAT experiment at the Fermilab Test Beam Facility. We measure a population of isolated MeV-scale energy depositions, or blips, in 296 LArIAT events containing tracks from stopping low-momentum pions and muons. The average numbers of visible blips are measured to be 0.74 $\pm$ 0.19 and 1.86 $\pm$ 0.17 near muon and pion track endpoints, respectively. The 3.6$σ$ statistically significant difference in blip content between muons and pions provides the first demonstration of a new method of pion-muon discrimination in neutrino liquid argon time projection chamber experiments. LArIAT Monte Carlo simulations predict substantially higher average blip counts for negative muon (1.22 $\pm$ 0.08) and pion (2.34 $\pm$ 0.09) nuclear captures. We attribute this difference to Geant4's inaccurate simulation of the nuclear capture process. △ Less

Submitted 9 August, 2024; originally announced August 2024.

Report number: PUB-24-0455-PPD

Modelling power-law ultrasound absorption using a time-fractional, static memory, Fourier pseudo-spectral method

Authors: Matthew. J. King, Timon. S. Gutleb, B. E. Treeby, B. T. Cox

Abstract: We describe and implement a numerical method for modelling the frequency-dependent power-law absorption of ultrasound in tissue, as governed by the first order linear wave equations with a loss taking the form of a fractional time derivative. The (Caputo) fractional time derivative requires the full problem history which is contained within an iterative procedure. The resulting numerical method re… ▽ More We describe and implement a numerical method for modelling the frequency-dependent power-law absorption of ultrasound in tissue, as governed by the first order linear wave equations with a loss taking the form of a fractional time derivative. The (Caputo) fractional time derivative requires the full problem history which is contained within an iterative procedure. The resulting numerical method requires a fixed (static) memory cost irrespective of the number of time steps. The spatial domain is treated by the Fourier spectral method. Numerically comparisons are made against a model for the same power-law absorption with loss described by the fractional-Laplacian operator. One advantage of the fractional time derivative over the fractional-Laplacian operator is the local treatment of the power-law, allowing for a spatially varying frequency power-law. △ Less

Submitted 5 June, 2025; v1 submitted 5 August, 2024; originally announced August 2024.

Journal ref: vol. 157, issue 3, pp. 1761-1771 (2025)

Scintillation Light in SBND: Simulation, Reconstruction, and Expected Performance of the Photon Detection System

Authors: SBND Collaboration, P. Abratenko, R. Acciarri, C. Adams, L. Aliaga-Soplin, O. Alterkait, R. Alvarez-Garrote, C. Andreopoulos, A. Antonakis, L. Arellano, J. Asaadi, W. Badgett, S. Balasubramanian, V. Basque, A. Beever, B. Behera, E. Belchior, M. Betancourt, A. Bhat, M. Bishai, A. Blake, B. Bogart, J. Bogenschuetz, D. Brailsford, A. Brandt , et al. (158 additional authors not shown)

Abstract: SBND is the near detector of the Short-Baseline Neutrino program at Fermilab. Its location near to the Booster Neutrino Beam source and relatively large mass will allow the study of neutrino interactions on argon with unprecedented statistics. This paper describes the expected performance of the SBND photon detection system, using a simulated sample of beam neutrinos and cosmogenic particles. Its… ▽ More SBND is the near detector of the Short-Baseline Neutrino program at Fermilab. Its location near to the Booster Neutrino Beam source and relatively large mass will allow the study of neutrino interactions on argon with unprecedented statistics. This paper describes the expected performance of the SBND photon detection system, using a simulated sample of beam neutrinos and cosmogenic particles. Its design is a dual readout concept combining a system of 120 photomultiplier tubes, used for triggering, with a system of 192 X-ARAPUCA devices, located behind the anode wire planes. Furthermore, covering the cathode plane with highly-reflective panels coated with a wavelength-shifting compound recovers part of the light emitted towards the cathode, where no optical detectors exist. We show how this new design provides a high light yield and a more uniform detection efficiency, an excellent timing resolution and an independent 3D-position reconstruction using only the scintillation light. Finally, the whole reconstruction chain is applied to recover the temporal structure of the beam spill, which is resolved with a resolution on the order of nanoseconds. △ Less

Submitted 11 June, 2024; originally announced June 2024.

Comments: 21 pages, 17 figures

Report number: FERMILAB-PUB-24-0303-PPD

Journal ref: Eur. Phys. J. C 84, 1046 (2024)

Inferring interaction potentials from stochastic particle trajectories

Authors: Ella M. King, Megan C. Engel, Caroline Martin, Alp M. Sunol, Qian-Ze Zhu, Sam S. Schoenholz, Vinothan N. Manoharan, Michael P. Brenner

Abstract: Accurate interaction potentials between microscopic components such as colloidal particles or cells are crucial to understanding a range of processes, including colloidal crystallization, bacterial colony formation, and cancer metastasis. Even in systems where the precise interaction mechanisms are unknown, effective interactions can be measured to inform simulation and design. However, these meas… ▽ More Accurate interaction potentials between microscopic components such as colloidal particles or cells are crucial to understanding a range of processes, including colloidal crystallization, bacterial colony formation, and cancer metastasis. Even in systems where the precise interaction mechanisms are unknown, effective interactions can be measured to inform simulation and design. However, these measurements are difficult and time-intensive, and often require conditions that are drastically different from in situ conditions of the system of interest. Moreover, existing methods of measuring interparticle potentials rely on constraining a small number of particles at equilibrium, placing limits on which interactions can be measured. We introduce a method for inferring interaction potentials directly from trajectory data of interacting particles. We explicitly solve the equations of motion to find a form of the potential that maximizes the probability of observing a known trajectory. Our method is valid for systems both in and out of equilibrium, is well-suited to large numbers of particles interacting in typical system conditions, and does not assume a functional form of the interaction potential. We apply our method to infer the interactions of colloidal spheres from experimental data, successfully extracting the range and strength of a depletion interaction from the motion of the particles. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Programmable patchy particles for materials design

Authors: Ella M. King, Chrisy Xiyu Du, Qian-Ze Zhu, Samuel S. Schoenholz, Michael P. Brenner

Abstract: Direct design of complex functional materials would revolutionize technologies ranging from printable organs to novel clean energy devices. However, even incremental steps towards designing functional materials have proven challenging. If the material is constructed from highly complex components, the design space of materials properties rapidly becomes too computationally expensive to search. On… ▽ More Direct design of complex functional materials would revolutionize technologies ranging from printable organs to novel clean energy devices. However, even incremental steps towards designing functional materials have proven challenging. If the material is constructed from highly complex components, the design space of materials properties rapidly becomes too computationally expensive to search. On the other hand, very simple components such as uniform spherical particles are not powerful enough to capture rich functional behavior. Here, we introduce a differentiable materials design model with components that are simple enough to design yet powerful enough to capture complex materials properties: rigid bodies composed of spherical particles with directional interactions (patchy particles). We showcase the method with self-assembly designs ranging from open lattices to self-limiting clusters, all of which are notoriously challenging design goals to achieve using purely isotropic particles. By directly optimizing over the location and interaction of the patches on patchy particles using gradient descent, we dramatically reduce the computation time for finding the optimal building blocks. △ Less

Submitted 8 December, 2023; originally announced December 2023.

Laser harmonic generation with tuneable orbital angular momentum using a structured plasma target

Authors: R. M. G. M. Trines, H. Schmitz, M. King, P. McKenna, R. Bingham

Abstract: In previous studies of spin-to-orbital angular momentum (AM) conversion in laser high harmonic generation (HHG) using a plasma target, one unit of spin AM is always converted into precisely one unit of OAM [1, 2]. Here we show, through analytic theory and numerical simulations, that we can exchange one unit of SAM for a tuneable amount of OAM per harmonic step, via the use of a structured plasma t… ▽ More In previous studies of spin-to-orbital angular momentum (AM) conversion in laser high harmonic generation (HHG) using a plasma target, one unit of spin AM is always converted into precisely one unit of OAM [1, 2]. Here we show, through analytic theory and numerical simulations, that we can exchange one unit of SAM for a tuneable amount of OAM per harmonic step, via the use of a structured plasma target. In the process, we introduce a novel framework to study laser harmonic generation via recasting it as a beat wave process. This framework enables us to easily calculate and visualise harmonic progressions, unify the "photon counting" and "symmetry-based" approaches to HHG and provide new explanations for existing HHG results. Our framework also includes a specific way to analyse simultaneously the frequency, spin and OAM content of the harmonic radiation which provides enhanced insight into this process. The prospects of using our new framework to design HHG configurations with tuneable high-order transverse modes, also covering the design of structured plasma targets, will be discussed. △ Less

Submitted 19 May, 2023; originally announced May 2023.

Comments: 22 pages, 2 figures

The effect of loops on the mean square displacement of Rouse-model chromatin

Authors: Tianyu Yuan, Hao Yan, Mary Lou P. Bailey, Jessica F. Williams, Ivan Surovtsev, Megan C. King, Simon G. J. Mochrie

Abstract: Many researchers have been encouraged to describe the dynamics of chromosomal loci in chromatin using the classical Rouse model of polymer dynamics by the agreement between the measured mean square displacement (MSD) versus time of fluorescently-labelled loci and the Rouse-model predictions. However, the discovery of intermediate-scale chromatin organization, known as topologically associating dom… ▽ More Many researchers have been encouraged to describe the dynamics of chromosomal loci in chromatin using the classical Rouse model of polymer dynamics by the agreement between the measured mean square displacement (MSD) versus time of fluorescently-labelled loci and the Rouse-model predictions. However, the discovery of intermediate-scale chromatin organization, known as topologically associating domains (TADs), together with the proposed explanation of TADs in terms of chromatin loops and loop extrusion, is at odds with the classical Rouse model, which does not contain loops. Accordingly, we introduce an extended Rouse model that incorporates chromatin loop configurations from loop-extrusion-factor-model simulations. Specifically, we extend the classical Rouse model by modifying the polymer's dynamical matrix to incorporate extra springs that represent loop bases. We also theoretically generalize the friction coefficient matrix so that the Rouse beads with non-uniform friction coefficients are compatible with our Rouse model simulation method. This extended Rouse model allowes us to investigate the impact of loops and loop extrusion on the dynamics of chromatin. We show that loops significantly suppress the averaged MSD of a chromosomal locus, consistent with recent experiments that track fluorescently-labelled chromatin loci in fission yeast [M. L. P. Bailey, I. Surovtsev, J. F. Williams, H. Yan, T. Yuan, S. G. Mochrie, and M. C. King, Mol. Biol. Cell (in press)]. We also find that loops slightly reduce the MSD's stretching exponent from the classical Rouse-model value of 0.5 to a loop-density-dependent value in the 0.45-0.40 range. Remarkably, stretching exponent values in this range have also been reported in recent experiments [S. C. Weber, A. J. Spakowitz, and J. A. Theriot, Phys. Rev. Lett. 104, 238102 (2010) and Bailey et al., Mol. Biol. Cell (in press)]. △ Less

Submitted 21 April, 2023; originally announced April 2023.

Journal ref: Phys. Rev. E 109, 044502 (2024)

Automated control and optimisation of laser driven ion acceleration

Authors: B. Loughran, M. J. V. Streeter, H. Ahmed, S. Astbury, M. Balcazar, M. Borghesi, N. Bourgeois, C. B. Curry, S. J. D. Dann, S. DiIorio, N. P. Dover, T. Dzelzanis, O. C. Ettlinger, M. Gauthier, L. Giuffrida, G. D. Glenn, S. H. Glenzer, J. S. Green, R. J. Gray, G. S. Hicks, C. Hyland, V. Istokskaia, M. King, D. Margarone, O. McCusker , et al. (10 additional authors not shown)

Abstract: The interaction of relativistically intense lasers with opaque targets represents a highly non-linear, multi-dimensional parameter space. This limits the utility of sequential 1D scanning of experimental parameters for the optimisation of secondary radiation, although to-date this has been the accepted methodology due to low data acquisition rates. High repetition-rate (HRR) lasers augmented by ma… ▽ More The interaction of relativistically intense lasers with opaque targets represents a highly non-linear, multi-dimensional parameter space. This limits the utility of sequential 1D scanning of experimental parameters for the optimisation of secondary radiation, although to-date this has been the accepted methodology due to low data acquisition rates. High repetition-rate (HRR) lasers augmented by machine learning present a valuable opportunity for efficient source optimisation. Here, an automated, HRR-compatible system produced high fidelity parameter scans, revealing the influence of laser intensity on target pre-heating and proton generation. A closed-loop Bayesian optimisation of maximum proton energy, through control of the laser wavefront and target position, produced proton beams with equivalent maximum energy to manually-optimized laser pulses but using only 60% of the laser energy. This demonstration of automated optimisation of laser-driven proton beams is a crucial step towards deeper physical insight and the construction of future radiation sources. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Comments: 11 pages

Transverse phase space tomography in the CLARA accelerator test facility using image compression and machine learning

Authors: Andrzej Wolski, Mark A. Johnson, Matthew King, Boris L. Militsyn, Peter H. Williams

Abstract: We describe a novel technique, based on image compression and machine learning, for transverse phase space tomography in two degrees of freedom in an accelerator beamline. The technique has been used in the CLARA accelerator test facility at Daresbury Laboratory: results from the machine learning method are compared with those from a conventional tomography algorithm (algebraic reconstruction), ap… ▽ More We describe a novel technique, based on image compression and machine learning, for transverse phase space tomography in two degrees of freedom in an accelerator beamline. The technique has been used in the CLARA accelerator test facility at Daresbury Laboratory: results from the machine learning method are compared with those from a conventional tomography algorithm (algebraic reconstruction), applied to the same data. The use of machine learning allows reconstruction of the 4D phase space distribution of the beam to be carried out much more rapidly than using conventional tomography algorithms, and also enables the use of image compression to reduce significantly the size of the data sets involved in the analysis. Results from the machine learning technique are at least as good as those from the algebraic reconstruction tomography in characterising the beam behaviour, in terms of the variation of the beam size in response to variation of the quadrupole strengths. △ Less

Submitted 2 September, 2022; originally announced September 2022.

Learning to estimate a surrogate respiratory signal from cardiac motion by signal-to-signal translation

Authors: Akshay Iyer, Clifford Lindsay, Hendrik Pretorius, Michael King

Abstract: In this work, we develop a neural network-based method to convert a noisy motion signal generated from segmenting rebinned list-mode cardiac SPECT images, to that of a high-quality surrogate signal, such as those seen from external motion tracking systems (EMTs). This synthetic surrogate will be used as input to our pre-existing motion correction technique developed for EMT surrogate signals. In o… ▽ More In this work, we develop a neural network-based method to convert a noisy motion signal generated from segmenting rebinned list-mode cardiac SPECT images, to that of a high-quality surrogate signal, such as those seen from external motion tracking systems (EMTs). This synthetic surrogate will be used as input to our pre-existing motion correction technique developed for EMT surrogate signals. In our method, we test two families of neural networks to translate noisy internal motion to external surrogate: 1) fully connected networks and 2) convolutional neural networks. Our dataset consists of cardiac perfusion SPECT acquisitions for which cardiac motion was estimated (input: center-of-count-mass - COM signals) in conjunction with a respiratory surrogate motion signal acquired using a commercial Vicon Motion Tracking System (GT: EMT signals). We obtained an average R-score of 0.76 between the predicted surrogate and the EMT signal. Our goal is to lay a foundation to guide the optimization of neural networks for respiratory motion correction from SPECT without the need for an EMT. △ Less

Submitted 20 July, 2022; originally announced August 2022.

Comments: Medical Imaging Meets NeurIPS

Response of a Commercial 0.25 um Thin-Film Silicon-on-Sapphire CMOS Technology to Total Ionizing Dose

Authors: Michael P. King, Datao Gong, Chonghan Liu, Tiankuan Liu, Annie C. Xiang, Jinbo Ye, Ronald D. Schrimpf, Robert A. Reed, Michael L. Alles, Daniel M. Fleetwood

Abstract: The radiation response of a 0.25 um silicon-on-sapphire CMOS technology is characterized at the transistor and circuit levels utilizing both standard and enclosed layout devices. Device-level characterization showed threshold voltage change of less than 170 mV and leakage current change of less than 1 nA for individual nMOSFET and pMOSFET devices at a total dose of 100 krad(SiO2). The increase in… ▽ More The radiation response of a 0.25 um silicon-on-sapphire CMOS technology is characterized at the transistor and circuit levels utilizing both standard and enclosed layout devices. Device-level characterization showed threshold voltage change of less than 170 mV and leakage current change of less than 1 nA for individual nMOSFET and pMOSFET devices at a total dose of 100 krad(SiO2). The increase in power supply current at the circuit level was less than 5%, consistent with the small change in off-state transistor leakage current. The technology exhibits good characteristics for use in the electronics of the ATLAS experiment at the Large Hadron Collider. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Comments: 5 pages, 5 figures

Journal ref: JINST 5 C11021 (2010)

Bottoms Up: Standard Model Effective Field Theory from a Model Perspective

Authors: Philip Bechtle, Cristin Chall, Martin King, Michael Kraemer, Peter Maettig, Michael Stoeltzner

Abstract: Experiments in particle physics have hitherto failed to produce any significant evidence for the many explicit models of physics beyond the Standard Model (BSM) that had been proposed over the past decades. As a result, physicists have increasingly turned to model-independent strategies as tools in searching for a wide range of possible BSM effects. In this paper, we describe the Standard Model Ef… ▽ More Experiments in particle physics have hitherto failed to produce any significant evidence for the many explicit models of physics beyond the Standard Model (BSM) that had been proposed over the past decades. As a result, physicists have increasingly turned to model-independent strategies as tools in searching for a wide range of possible BSM effects. In this paper, we describe the Standard Model Effective Field Theory (SM-EFT) and analyse it in the context of the philosophical discussions about models, theories, and (bottom-up) effective field theories. We find that while the SM-EFT is a quantum field theory, assisting experimentalists in searching for deviations from the SM, in its general form it lacks some of the characteristic features of models. Those features only come into play if put in by hand or prompted by empirical evidence for deviations. Employing different philosophical approaches to models, we argue that the case study suggests not to take a view on models that is overly permissive because it blurs the lines between the different stages of the SM-EFT research strategies and glosses over particle physicists' motivations for undertaking this bottom-up approach in the first place. Looking at EFTs from the perspective of modelling does not require taking a stance on some specific brand of realism or taking sides in the debate between reduction and emergence into which EFTs have recently been embedded. △ Less

Submitted 21 January, 2022; originally announced January 2022.

The critical layer in quadratic flow boundary layers over acoustic linings

Authors: Matthew J. King, Edward J. Brambley, Renan Liupekevicius, Miren Radia, Paul Lafourcade, Tauqeer H. Shah

Abstract: A straight cylindrical duct is considered containing an axial mean flow that is uniform everywhere except within a boundary layer near the wall, which need not be thin. Within this boundary layer the mean flow varies parabolically. The linearized Euler equations are Fourier transformed to give the Pridmore-Brown equation, for which the Greens function is constructed using Frobenius series. Inverti… ▽ More A straight cylindrical duct is considered containing an axial mean flow that is uniform everywhere except within a boundary layer near the wall, which need not be thin. Within this boundary layer the mean flow varies parabolically. The linearized Euler equations are Fourier transformed to give the Pridmore-Brown equation, for which the Greens function is constructed using Frobenius series. Inverting the spatial Fourier transform, the critical layer contribution is given as the non-modal contribution from integrating around the continuous spectrum branch cut. This contribution is found to be the dominant downstream contribution to the pressure perturbation in certain cases, particularly for thicker boundary layers. The continuous spectrum branch cut is also found to stabilize what are otherwise convectively unstable modes by hiding them behind the branch cut. Overall, the contribution from the critical layer is found to give a neutrally stable non-modal wave with a phase velocity equal to the mean flow velocity at the source when the source is located within the sheared-flow region, and to decay algebraically along the duct as $O(x^{-5/2})$ for a source located with the uniform flow region. The Frobenius expansion, in addition to being numerically accurate close to the critical layer where other numerical methods loose accuracy, is also able to locate modal poles hidden behind the branch cut, which other methods are unable to find; this includes the stabilized hydrodynamic instability. Matlab code is provided to compute the Greens function. △ Less

Submitted 24 October, 2022; v1 submitted 2 December, 2021; originally announced December 2021.

Comments: 44 pages, 14 figures

Journal ref: J. Fluid Mech. 950 (2022) A8

Separation of tectonic and local components of horizontal GPS station velocities: a case study for glacial isostatic adjustment in East Antarctica

Authors: Ross J. Turner, Anya M. Reading, Matt A. King

Abstract: Accurate measurement of the local component of geodetic motion at GPS stations presents a challenge due to the need to separate this signal from the tectonic plate rotation. A pressing example is the observation of glacial isostatic adjustment (GIA) which constrains the Earth's response to ice unloading, and hence, contributions of ice-covered regions such as Antarctica to global sea level rise fo… ▽ More Accurate measurement of the local component of geodetic motion at GPS stations presents a challenge due to the need to separate this signal from the tectonic plate rotation. A pressing example is the observation of glacial isostatic adjustment (GIA) which constrains the Earth's response to ice unloading, and hence, contributions of ice-covered regions such as Antarctica to global sea level rise following ice mass loss. We focus on horizontal GPS velocities which typically contain a large component of plate rotation and a smaller local component primarily relating to GIA. Incomplete separation of these components introduces significant bias into estimates of GIA motion vectors. We present the results of a series of tests based on the motions of GPS stations from East Antarctica: 1) signal separation for sets of synthetic data that replicate the geometric character of non-separable, and separable, GIA-like horizontal velocities; and 2) signal separation for real GPS station data with an appraisal of uncertainties. For both synthetic and real motions, we compare results where the stations are unweighted, and where each station is areal-weighted using a metric representing the inverse of the spatial density of neighbouring stations. From the synthetic tests, we show that a GIA-like signal is recoverable from the plate rotation signal providing it has geometric variability across East Antarctica. We also show that areal-weighting has a very significant effect on the ability to recover a GIA-like signal with geometric variability, and hence on separating the plate rotation and local components. For the real data, assuming a rigid Antarctic plate, fitted plate rotation parameters compare well with other studies in the literature. We find that 25 out of 36 GPS stations examined in East Antarctica have non-zero local horizontal velocities, at the 2$σ$ level, after signal separation. △ Less

Submitted 19 August, 2021; originally announced August 2021.

Comments: 15 pages, 9 figures, 5 tables; published in GJI

Extrusion of chromatin loops by a composite loop extrusion factor

Authors: Hao Yan, Ivan Surovtsev, Jessica F Williams, Mary Lou P Bailey, Megan C King, Simon G J Mochrie

Abstract: Chromatin loop extrusion by Structural Maintenance of Chromosome (SMC) complexes is thought to underlie intermediate-scale chromatin organization inside cells. Motivated by a number of experiments suggesting that nucleosomes may block loop extrusion by SMCs, such as cohesin and condensin complexes, we introduce and characterize theoretically a composite loop extrusion factor (composite LEF) model.… ▽ More Chromatin loop extrusion by Structural Maintenance of Chromosome (SMC) complexes is thought to underlie intermediate-scale chromatin organization inside cells. Motivated by a number of experiments suggesting that nucleosomes may block loop extrusion by SMCs, such as cohesin and condensin complexes, we introduce and characterize theoretically a composite loop extrusion factor (composite LEF) model. In addition to an SMC complex that creates a chromatin loop by encircling two threads of DNA, this model includes a remodeling complex that relocates or removes nucleosomes as it progresses along the chromatin, and nucleosomes that block SMC translocation along the DNA. Loop extrusion is enabled by SMC motion along nucleosome-free DNA, created in the wake of the remodeling complex, while nucleosome re-binding behind the SMC acts as a ratchet, holding the SMC close to the remodeling complex. We show that, for a wide range of parameter values, this collection of factors constitutes a composite LEF that extrudes loops with a velocity, comparable to the velocity of remodeling complex translocation on chromatin in the absence of SMC, and much faster than loop extrusion by an isolated SMC that is blocked by nucleosomes. △ Less

Submitted 1 March, 2021; originally announced March 2021.

Comments: 12 pages, 7 figures

Journal ref: Phys. Rev. E 104, 024414 (2021)

Predominant Contribution of Direct Laser Acceleration to High-Energy Electron Spectra in a Low-Density Self-Modulated Laser Wakefield Accelerator

Authors: P. M. King, K. Miller, N. Lemos, J. L. Shaw, B. F. Kraus, M. Thibodeau, B. M. Hegelich, J. Hinojosa, P. Michel, C. Joshi, K. A. Marsh, W. Mori, A. Pak, A. G. R. Thomas, F. Albert

Abstract: The two-temperature relativistic electron spectrum from a low-density ($3\times10^{17}$~cm$^{-3}$) self-modulated laser wakefield accelerator (SM-LWFA) is observed to transition between temperatures of $19\pm0.65$ and $46\pm2.45$ MeV at an electron energy of about 100 MeV. When the electrons are dispersed orthogonally to the laser polarization, their spectrum above 60 MeV shows a forking structure… ▽ More The two-temperature relativistic electron spectrum from a low-density ($3\times10^{17}$~cm$^{-3}$) self-modulated laser wakefield accelerator (SM-LWFA) is observed to transition between temperatures of $19\pm0.65$ and $46\pm2.45$ MeV at an electron energy of about 100 MeV. When the electrons are dispersed orthogonally to the laser polarization, their spectrum above 60 MeV shows a forking structure characteristic of direct laser acceleration (DLA). Both the two-temperature distribution and the forking structure are reproduced in a quasi-3D \textsc{Osiris} simulation of the interaction of the 1-ps, moderate-amplitude ($a_{0}=2.7$) laser pulse with the low-density plasma. Particle tracking shows that while the SM-LWFA mechanism dominates below 40 MeV, the highest-energy ($>60$ MeV) electrons gain most of their energy through DLA. By separating the simulated electric fields into modes, the DLA-dominated electrons are shown to lose significant energy to the longitudinal laser field from the tight focusing geometry, resulting in a more accurate measure of net DLA energy gain than previously possible. △ Less

Submitted 2 December, 2020; originally announced December 2020.

Journal ref: Phys. Rev. Accel. Beams 24, 011302 (2021)

Self-assembling kinetics: Accessing a new design space via differentiable statistical-physics models

Authors: Carl P. Goodrich, Ella M. King, Samuel S. Schoenholz, Ekin D. Cubuk, Michael Brenner

Abstract: The inverse problem of designing component interactions to target emergent structure is fundamental to numerous applications in biotechnology, materials science, and statistical physics. Equally important is the inverse problem of designing emergent kinetics, but this has received considerably less attention. Using recent advances in automatic differentiation, we show how kinetic pathways can be p… ▽ More The inverse problem of designing component interactions to target emergent structure is fundamental to numerous applications in biotechnology, materials science, and statistical physics. Equally important is the inverse problem of designing emergent kinetics, but this has received considerably less attention. Using recent advances in automatic differentiation, we show how kinetic pathways can be precisely designed by directly differentiating through statistical-physics models, namely free energy calculations and molecular dynamics simulations. We consider two systems that are crucial to our understanding of structural self-assembly: bulk crystallization and small nanoclusters. In each case we are able to assemble precise dynamical features. Using gradient information, we manipulate interactions among constituent particles to tune the rate at which these systems yield specific structures of interest. Moreover, we use this approach to learn non-trivial features about the high-dimensional design space, allowing us to accurately predict when multiple kinetic features can be simultaneously and independently controlled. These results provide a concrete and generalizable foundation for studying non-structural self-assembly, including kinetic properties as well as other complex emergent properties, in a vast array of systems. △ Less

Submitted 18 November, 2020; v1 submitted 28 October, 2020; originally announced October 2020.

Comments: 5 figures

Covariance Distributions in Single Particle Tracking

Authors: Mary Lou P Bailey, Hao Yan, Ivan Surovtsev, Jessica F Williams, Megan C King, Simon G J Mochrie

Abstract: Several recent experiments, including our own in the fission yeast, S. pombe, have characterized the motions of gene loci within living nuclei by measuring the locus position over time, then proceeding to obtain the statistical properties of this motion. To address the question of whether a population of single particle tracks, obtained from many different cells, corresponds to a single mode of di… ▽ More Several recent experiments, including our own in the fission yeast, S. pombe, have characterized the motions of gene loci within living nuclei by measuring the locus position over time, then proceeding to obtain the statistical properties of this motion. To address the question of whether a population of single particle tracks, obtained from many different cells, corresponds to a single mode of diffusion, we derive theoretical equations describing the probability distribution of the displacement covariance, assuming the displacement is a zero-mean multivariate Gaussian random variable. We also determine the corresponding theoretical means, variances, and third central moments. Bolstering the theory is good agreement between its predictions and the results obtained for various simulated and measured data sets, including simulated particle trajectories of simple and anomalous diffusion, and the measured trajectories of an optically-trapped bead in water, and in a viscoelastic solution. We also show that, for sufficiently long tracks, each covariance distribution in these examples is well-described by a skew-normal distribution with mean, variance, and skewness given by theory. For experimental S. pombe gene locus data, however, we find that the first two covariance distributions are wider than predicted, although the third and subsequent covariances are well-described by theory. This suggests that the origin of the theory-experiment discrepancy is associated with localization noise, which influences only the first two covariances. Thus, we hypothesize that the discrepancy is caused by locus-to-locus heterogeneity in the localization noise. Further simulations reveal excess covariance widths can be largely recreated on the basis of heterogeneous noise. We conclude that the motion of gene loci in fission yeast is consistent with a single mode of diffusion. △ Less

Submitted 11 January, 2021; v1 submitted 6 October, 2020; originally announced October 2020.

Comments: Main text 19 pages, 22 figures (28 pages total)

Journal ref: Phys. Rev. E 103, 032405 (2021)

Mechanical Ventilator Milano (MVM): A Novel Mechanical Ventilator Designed for Mass Scale Production in Response to the COVID-19 Pandemic

Authors: C. Galbiati, A. Abba, P. Agnes, P. Amaudruz, M. Arba, F. Ardellier-Desages, C. Badia, G. Batignani, G. Bellani, G. Bianchi, D. Bishop, V. Bocci, W. Bonivento, B. Bottino, M. Bouchard, S. Brice, G. Buccino, S. Bussino, A. Caminata, A. Capra, M. Caravati, M. Carlini, L. Carrozzi, J. M. Cela, B. Celano , et al. (123 additional authors not shown)

Abstract: Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equ… ▽ More Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equivalent of the old and reliable Manley Ventilator, and is able to operate in both pressure-controlled and pressure-supported ventilation modes. MVM is optimized for the COVID-19 emergency, thanks to the collaboration with medical doctors in the front line. MVM is designed for large-scale production in a short amount of time and at a limited cost, as it relays on off-the-shelf components, readily available worldwide. Operation of the MVM requires only a source of compressed oxygen (or compressed medical air) and electrical power. Initial tests of a prototype device with a breathing simulator are also presented. Further tests and developments are underway. At this stage the MVM is not yet a certified medical device but certification is in progress. △ Less

Submitted 10 April, 2020; v1 submitted 23 March, 2020; originally announced March 2020.

Report number: FERMILAB-PUB-21-601-ND-PPD-QIS-SCD

Journal ref: Phys.Fluids 33 (2021) 3, 037122

Ternary Fingerprints with Reference Odor for Fluctuation-Enhanced Sensing

Authors: X. You, L. B. Kish, J. -L. Seguin, M. D. King

Abstract: An improved method for Fluctuation Enhanced Sensing (FES) is introduced. We enhanced the old binary fingerprinting method, where the fingerprint bit values were +/- 1, by introducing ternary fingerprints utilizing a reference odor. In the ternary method, the fingerprint bit values are -1, 0, and +1 where the 0 value stands for the situation where the slope of the spectrum is identical to that of t… ▽ More An improved method for Fluctuation Enhanced Sensing (FES) is introduced. We enhanced the old binary fingerprinting method, where the fingerprint bit values were +/- 1, by introducing ternary fingerprints utilizing a reference odor. In the ternary method, the fingerprint bit values are -1, 0, and +1 where the 0 value stands for the situation where the slope of the spectrum is identical to that of the reference odor. The application of the reference odor spectrum makes the fingerprint relative to the reference. This feature increases the information entropy of the fingerprints. The method is briefly illustrated by sensing bacterial odor in cow manure isolates. △ Less

Submitted 30 January, 2020; originally announced February 2020.

Comments: submitted for publication

A modular apparatus for use in high-precision measurements of parity violation in polarized eV neutron transmission`

Authors: D. C. Schaper, C. Auton, L. Barrón-Palos, M. Borrego, A. Chavez, L. Cole, C. B. Crawford, J. Curole, H. Dhahri, K. A. Dickerson, J. Doskow, W. Fox, M. H. Gervais, B. M. Goodson, K. Knickerbocker, C. Jiang, P. M. King, H. Lu, M. Mocko, D. Olivera-Velarde, J. G. Otero Munoz, S. I. Penttilä, A. Pérez-Martín, W. M. Snow, K. Steffen , et al. (2 additional authors not shown)

Abstract: We describe a modular apparatus for use in parity-violation measurements in epithermal neutron-nucleus resonances with high instantaneous neutron fluxes at the Manuel Lujan Jr.\ Neutron Scattering Center at Los Alamos National Laboratory. This apparatus is designed to conduct high-precision measurements of the parity-odd transmission asymmetry of longitudinally polarized neutrons through targets c… ▽ More We describe a modular apparatus for use in parity-violation measurements in epithermal neutron-nucleus resonances with high instantaneous neutron fluxes at the Manuel Lujan Jr.\ Neutron Scattering Center at Los Alamos National Laboratory. This apparatus is designed to conduct high-precision measurements of the parity-odd transmission asymmetry of longitudinally polarized neutrons through targets containing nuclei with p-wave neutron-nucleus resonances in the 0.1-10 eV energy regime and to accommodate a future search for time reversal violation in polarized neutron transmission through polarized nuclear targets. The apparatus consists of an adjustable neutron and gamma collimation system, a \(^3\)He-$^{4}$He ion chamber neutron flux monitor, two identical cryostats for target cooling, an adiabatic eV-neutron spin flipper, a near-unit efficiency \(^6\)Li-\(^{7}\)Li scintillation detector operated in current mode, a flexible CAEN data acquisition system, and a neutron spin filter based on spin-exchange optical pumping of $^{3}$He gas. We describe the features of the apparatus design devoted to the suppression of systematic errors in parity-odd asymmetry measurements. We describe the configuration of the apparatus used to conduct a precision measurement of parity violation at the 0.7 eV p-wave resonance in $^{139}$La which employs two identical $^{139}$La targets, one to polarize the beam on the p-wave resonance using the weak interaction and one to analyze the polarization. △ Less

Submitted 20 April, 2020; v1 submitted 8 January, 2020; originally announced January 2020.

Comments: 43 pages, 23 figures

Design and Performance of the Spin Asymmetries of the Nucleon Experiment

Authors: J. D. Maxwell, W. R. Armstrong, S. Choi, M. K. Jones, H. Kang, A. Liyanage, Z. -E. Meziani, J. Mulholland, L. Ndukum, O. A. Rondon, A. Ahmidouch, I. Albayrak, A. Asaturyan, O. Ates, H. Baghdasaryan, W. Boeglin, P. Bosted, E. Brash, J. Brock, C. Butuceanu, M. Bychkov, C. Carlin, P. Carter, C. Chen, J. -P. Chen , et al. (80 additional authors not shown)

Abstract: The Spin Asymmetries of the Nucleon Experiment (SANE) performed inclusive, double-polarized electron scattering measurements of the proton at the Continuous Electron Beam Accelerator Facility at Jefferson Lab. A novel detector array observed scattered electrons of four-momentum transfer $2.5 < Q^2< 6.5$ GeV$^2$ and Bjorken scaling $0.3<x<0.8$ from initial beam energies of 4.7 and 5.9 GeV. Employin… ▽ More The Spin Asymmetries of the Nucleon Experiment (SANE) performed inclusive, double-polarized electron scattering measurements of the proton at the Continuous Electron Beam Accelerator Facility at Jefferson Lab. A novel detector array observed scattered electrons of four-momentum transfer $2.5 < Q^2< 6.5$ GeV$^2$ and Bjorken scaling $0.3<x<0.8$ from initial beam energies of 4.7 and 5.9 GeV. Employing a polarized proton target whose magnetic field direction could be rotated with respect to the incident electron beam, both parallel and near perpendicular spin asymmetries were measured, allowing model-independent access to transverse polarization observables $A_1$, $A_2$, $g_1$, $g_2$ and moment $d_2$ of the proton. This document summarizes the operation and performance of the polarized target, polarized electron beam, and novel detector systems used during the course of the experiment, and describes analysis techniques utilized to access the physics observables of interest. △ Less

Submitted 21 December, 2017; v1 submitted 22 November, 2017; originally announced November 2017.

Report number: JLAB-PHY-17-2595

Improved weather generator algorithm for multisite simulation of precipitation and temperature

Authors: Leanna M. King, Ian McLeod, Slobodan P. Simonovic

Abstract: The KnnCAD Version 4 weather generator algorithm for nonparametric, multisite simulations of temperature and precipitation data is presented. The K-nearest neighbour weather generator essentially reshuffles the historical data, with replacement. In KnnCAD Version 4, a block resampling scheme is introduced to preserve the temporal correlation structure in temperature data. Perturbation of the reshu… ▽ More The KnnCAD Version 4 weather generator algorithm for nonparametric, multisite simulations of temperature and precipitation data is presented. The K-nearest neighbour weather generator essentially reshuffles the historical data, with replacement. In KnnCAD Version 4, a block resampling scheme is introduced to preserve the temporal correlation structure in temperature data. Perturbation of the reshuffled variable data is also added to enhance the generation of extreme values. A case study of the Upper Thames River Basin in Ontario, Canada is performed and the model is shown to simulate effectively the historical characteristics at the site. The KnnCAD Version 4 approach offers a major advantage over parametric and semi-parametric weather generators as it can be applied to multiple sites for simulation of temperatures and precipitation amounts without making assumptions regarding the spatial correlations and the probability distributions for each variable. △ Less

Submitted 3 November, 2016; originally announced November 2016.

Comments: 40 pages, 9 figures, 3 tables

MSC Class: 62M10

Journal ref: Leanna M. King, Ian McLeod and Slobodan P. Simonovic (2015). Improved weather generator algorithm for multisite simulation of precipitation and temperature. Journal of the American Water Resources Association 51/5, 1305-1320

A novel comparison of Møller and Compton electron-beam polarimeters

Authors: J. A. Magee, A. Narayan, D. Jones, R. Beminiwattha, J. C. Cornejo, M. M. Dalton, W. Deconinck, D. Dutta, D. Gaskell, J. W. Martin, K. D. Paschke, V. Tvaskis, A. Asaturyan, J. Benesch, G. Cates, B. S. Cavness, L. A. Dillon-Townes, G. Hays, J. Hoskins, E. Ihloff, R. Jones, P. M. King, S. Kowalski, L. Kurchaninov, L. Lee , et al. (16 additional authors not shown)

Abstract: We have performed a novel comparison between electron-beam polarimeters based on Møller and Compton scattering. A sequence of electron-beam polarization measurements were performed at low beam currents ($<$ 5 $μ$A) during the $Q_{\rm weak}$ experiment in Hall C at Jefferson Lab. These low current measurements were bracketed by the regular high current (180 $μ$A) operation of the Compton polarimete… ▽ More We have performed a novel comparison between electron-beam polarimeters based on Møller and Compton scattering. A sequence of electron-beam polarization measurements were performed at low beam currents ($<$ 5 $μ$A) during the $Q_{\rm weak}$ experiment in Hall C at Jefferson Lab. These low current measurements were bracketed by the regular high current (180 $μ$A) operation of the Compton polarimeter. All measurements were found to be consistent within experimental uncertainties of 1% or less, demonstrating that electron polarization does not depend significantly on the beam current. This result lends confidence to the common practice of applying Møller measurements made at low beam currents to physics experiments performed at higher beam currents. The agreement between two polarimetry techniques based on independent physical processes sets an important benchmark for future precision asymmetry measurements that require sub-1% precision in polarimetry. △ Less

Submitted 25 January, 2017; v1 submitted 19 October, 2016; originally announced October 2016.

Men Set Their Own Cites High: Gender and Self-citation across Fields and over Time

Authors: Molly M. King, Carl T. Bergstrom, Shelley J. Correll, Jennifer Jacquet, Jevin D. West

Abstract: How common is self-citation in scholarly publication, and does the practice vary by gender? Using novel methods and a data set of 1.5 million research papers in the scholarly database JSTOR published between 1779 and 2011, the authors find that nearly 10 percent of references are self-citations by a paper's authors. The findings also show that between 1779 and 2011, men cited their own papers 56 p… ▽ More How common is self-citation in scholarly publication, and does the practice vary by gender? Using novel methods and a data set of 1.5 million research papers in the scholarly database JSTOR published between 1779 and 2011, the authors find that nearly 10 percent of references are self-citations by a paper's authors. The findings also show that between 1779 and 2011, men cited their own papers 56 percent more than did women. In the last two decades of data, men self-cited 70 percent more than women. Women are also more than 10 percentage points more likely than men to not cite their own previous work at all. While these patterns could result from differences in the number of papers that men and women authors have published rather than gender-specific patterns of self-citation behavior, this gender gap in self-citation rates has remained stable over the last 50 years, despite increased representation of women in academia. The authors break down self-citation patterns by academic field and number of authors and comment on potential mechanisms behind these observations. These findings have important implications for scholarly visibility and cumulative advantage in academic careers. △ Less

Submitted 12 December, 2017; v1 submitted 30 June, 2016; originally announced July 2016.

Comments: final published article

Journal ref: Socius 3: 1-22 (2017)

Search for magnetic monopoles with the MoEDAL prototype trapping detector in 8 TeV proton-proton collisions at the LHC

Authors: MoEDAL Collaboration, B. Acharya, J. Alexandre, K. Bendtz, P. Benes, J. Bernabéu, M. Campbell, S. Cecchini, J. Chwastowski, A. Chatterjee, M. de Montigny, D. Derendarz, A. De Roeck, J. R. Ellis, M. Fairbairn, D. Felea, M. Frank, D. Frekers, C. Garcia, G. Giacomelli, D. Haşegan, M. Kalliokoski, A. Katre, D. -W. Kim, M. G. L. King , et al. (44 additional authors not shown)

Abstract: The MoEDAL experiment is designed to search for magnetic monopoles and other highly-ionising particles produced in high-energy collisions at the LHC. The largely passive MoEDAL detector, deployed at Interaction Point 8 on the LHC ring, relies on two dedicated direct detection techniques. The first technique is based on stacks of nuclear-track detectors with surface area $\sim$18 m$^2$, sensitive t… ▽ More The MoEDAL experiment is designed to search for magnetic monopoles and other highly-ionising particles produced in high-energy collisions at the LHC. The largely passive MoEDAL detector, deployed at Interaction Point 8 on the LHC ring, relies on two dedicated direct detection techniques. The first technique is based on stacks of nuclear-track detectors with surface area $\sim$18 m$^2$, sensitive to particle ionisation exceeding a high threshold. These detectors are analysed offline by optical scanning microscopes. The second technique is based on the trapping of charged particles in an array of roughly 800 kg of aluminium samples. These samples are monitored offline for the presence of trapped magnetic charge at a remote superconducting magnetometer facility. We present here the results of a search for magnetic monopoles using a 160 kg prototype MoEDAL trapping detector exposed to 8 TeV proton-proton collisions at the LHC, for an integrated luminosity of 0.75 fb$^{-1}$. No magnetic charge exceeding $0.5g_{\rm D}$ (where $g_{\rm D}$ is the Dirac magnetic charge) is measured in any of the exposed samples, allowing limits to be placed on monopole production in the mass range 100 GeV$\leq m \leq$ 3500 GeV. Model-independent cross-section limits are presented in fiducial regions of monopole energy and direction for $1g_{\rm D}\leq|g|\leq 6g_{\rm D}$, and model-dependent cross-section limits are obtained for Drell-Yan pair production of spin-1/2 and spin-0 monopoles for $1g_{\rm D}\leq|g|\leq 4g_{\rm D}$. Under the assumption of Drell-Yan cross sections, mass limits are derived for $|g|=2g_{\rm D}$ and $|g|=3g_{\rm D}$ for the first time at the LHC, surpassing the results from previous collider experiments. △ Less

Submitted 11 July, 2016; v1 submitted 22 April, 2016; originally announced April 2016.

Comments: 25 pages, 11 figures, 2 tables, under review by JHEP

Report number: CERN-EP-2016-101

Journal ref: JHEP 08, 067 (2016)

Approaching the Asymptotic Regime of Rapidly Rotating Convection: Boundary Layers vs Interior Dynamics

Authors: S. Stellmach, M. Lischper, K. Julien, G. Vasil, J. S. Cheng, A. Ribeiro, E. M. King, J. M. Aurnou

Abstract: Rapidly rotating Rayleigh-Bénard convection is studied by combining results from direct numerical simulations (DNS), laboratory experiments and asymptotic modeling. The asymptotic theory is shown to provide a good description of the bulk dynamics at low, but finite Rossby number. However, large deviations from the asymptotically predicted heat transfer scaling are found, with laboratory experiment… ▽ More Rapidly rotating Rayleigh-Bénard convection is studied by combining results from direct numerical simulations (DNS), laboratory experiments and asymptotic modeling. The asymptotic theory is shown to provide a good description of the bulk dynamics at low, but finite Rossby number. However, large deviations from the asymptotically predicted heat transfer scaling are found, with laboratory experiments and DNS consistently yielding much larger Nusselt numbers than expected. These deviations are traced down to dynamically active Ekman boundary layers, which are shown to play an integral part in controlling heat transfer even for Ekman numbers as small as $10^{-7}$. By adding an analytical parameterization of the Ekman transport to simulations using stress-free boundary conditions, we demonstrate that the heat transfer jumps from values broadly compatible with the asymptotic theory to states of strongly increased heat transfer, in good quantitative agreement with no-slip DNS and compatible with the experimental data. Finally, similarly to non-rotating convection, we find no single scaling behavior, but instead that multiple well-defined dynamical regimes exist in rapidly-rotating convection systems. △ Less

Submitted 25 September, 2014; originally announced September 2014.

Comments: Submitted to Physical Review Letters on 17 July 2014

The Q_weak Experimental Apparatus

Authors: Qweak Collaboration, T. Allison, M. Anderson, D. Androic, D. S. Armstrong, A. Asaturyan, T. D. Averett, R. Averill, J. Balewski, J. Beaufait, R. S. Beminiwattha, J. Benesch, F. Benmokhtar, J. Bessuille, J. Birchall, E. Bonnell, J. Bowman, P. Brindza, D. B. Brown, R. D. Carlini, G. D. Cates, B. Cavness, G. Clark, J. C. Cornejo, S. Covrig Dusa , et al. (104 additional authors not shown)

Abstract: The Jefferson Lab Q_weak experiment determined the weak charge of the proton by measuring the parity-violating elastic scattering asymmetry of longitudinally polarized electrons from an unpolarized liquid hydrogen target at small momentum transfer. A custom apparatus was designed for this experiment to meet the technical challenges presented by the smallest and most precise ${\vec{e}}$p asymmetry… ▽ More The Jefferson Lab Q_weak experiment determined the weak charge of the proton by measuring the parity-violating elastic scattering asymmetry of longitudinally polarized electrons from an unpolarized liquid hydrogen target at small momentum transfer. A custom apparatus was designed for this experiment to meet the technical challenges presented by the smallest and most precise ${\vec{e}}$p asymmetry ever measured. Technical milestones were achieved at Jefferson Lab in target power, beam current, beam helicity reversal rate, polarimetry, detected rates, and control of helicity-correlated beam properties. The experiment employed 180 microA of 89% longitudinally polarized electrons whose helicity was reversed 960 times per second. The electrons were accelerated to 1.16 GeV and directed to a beamline with extensive instrumentation to measure helicity-correlated beam properties that can induce false asymmetries. Moller and Compton polarimetry were used to measure the electron beam polarization to better than 1%. The electron beam was incident on a 34.4 cm liquid hydrogen target. After passing through a triple collimator system, scattered electrons between 5.8 degrees and 11.6 degrees were bent in the toroidal magnetic field of a resistive copper-coil magnet. The electrons inside this acceptance were focused onto eight fused silica Cerenkov detectors arrayed symmetrically around the beam axis. A total scattered electron rate of about 7 GHz was incident on the detector array. The detectors were read out in integrating mode by custom-built low-noise pre-amplifiers and 18-bit sampling ADC modules. The momentum transfer Q^2 = 0.025 GeV^2 was determined using dedicated low-current (~100 pA) measurements with a set of drift chambers before (and a set of drift chambers and trigger scintillation counters after) the toroidal magnet. △ Less

Submitted 6 January, 2015; v1 submitted 24 September, 2014; originally announced September 2014.

Comments: 48 pages, 36 figures. Accepted by Nuclear Instruments and Methods A

Report number: JLab-PHY-14-1959

Fabrication of high quality GaN nanopillar arrays by dry and wet chemical etching

Authors: Dipak Paramanik, Abhishek Motayed, Matthew King, Jong-Yoon Ha, Sergi Kryluk, Albert V. Davydov, Alec Talin

Abstract: We study strain relaxation and surface damage of GaN nanopillar arrays fabricated using inductively coupled plasma (ICP) etching and post etch wet chemical treatment. We controlled the shape and surface damage of such nanopillar structures through selection of etching parameters. We compared different substrate temperatures and different chlorine-based etch chemistries to fabricate high quality Ga… ▽ More We study strain relaxation and surface damage of GaN nanopillar arrays fabricated using inductively coupled plasma (ICP) etching and post etch wet chemical treatment. We controlled the shape and surface damage of such nanopillar structures through selection of etching parameters. We compared different substrate temperatures and different chlorine-based etch chemistries to fabricate high quality GaN nanopillars. Room temperature photoluminescence and Raman scattering measurements were carried to study the presence of surface defect and strain relaxation on these nanostructures, respectively. We found that wet KOH etching can remove the side wall damages caused by dry plasma etching, leading to better quality of GaN nanopillars arrays. The Si material underneath the GaN pillars was removed by KOH wet etching, leaving behind a fine Si pillar to support the GaN structure. Substantial strain relaxations were observed in these structures from room temperature Raman spectroscopy measurements. Room temperature Photoluminescence spectroscopy shows the presence of whispering gallery modes from these the nano disks structures. △ Less

Submitted 5 April, 2014; v1 submitted 1 November, 2013; originally announced November 2013.

Comments: 20 pages, 5 figures

The role of gender in scholarly authorship

Authors: Jevin D. West, Jennifer Jacquet, Molly M. King, Shelley J. Correll, Carl T. Bergstrom

Abstract: Gender disparities appear to be decreasing in academia according to a number of metrics, such as grant funding, hiring, acceptance at scholarly journals, and productivity, and it might be tempting to think that gender inequity will soon be a problem of the past. However, a large-scale analysis based on over eight million papers across the natural sciences, social sciences, and humanities re- revea… ▽ More Gender disparities appear to be decreasing in academia according to a number of metrics, such as grant funding, hiring, acceptance at scholarly journals, and productivity, and it might be tempting to think that gender inequity will soon be a problem of the past. However, a large-scale analysis based on over eight million papers across the natural sciences, social sciences, and humanities re- reveals a number of understated and persistent ways in which gender inequities remain. For instance, even where raw publication counts seem to be equal between genders, close inspection reveals that, in certain fields, men predominate in the prestigious first and last author positions. Moreover, women are significantly underrepresented as authors of single-authored papers. Academics should be aware of the subtle ways that gender disparities can appear in scholarly authorship. △ Less

Submitted 7 November, 2012; originally announced November 2012.

Liquid oil painting: Free and forced convection in an enclosure with mechanical and thermal forcing

Authors: Gregory J. Sheard, Kean Y. Wong, Martin P. King

Abstract: A fluid dynamics video is linked to this article, which have been submitted to the Gallery of Fluid Motion as part of the 65th American Physical Society meeting of the Division of Fluid Dynamics, held in San Diego, California, USA, over 17-20 November 2012. The video serves to visualize flows generated in a rectangular enclosure that are subjected to both mechanical and thermal forcing through a c… ▽ More A fluid dynamics video is linked to this article, which have been submitted to the Gallery of Fluid Motion as part of the 65th American Physical Society meeting of the Division of Fluid Dynamics, held in San Diego, California, USA, over 17-20 November 2012. The video serves to visualize flows generated in a rectangular enclosure that are subjected to both mechanical and thermal forcing through a common horizontal boundary. This system exhibits features consistent with either horizontal convection or lid-driven cavity flows depending on the ratio between thermal and mechanical stirring, and three different cases are visualized in the linked videos. △ Less

Submitted 25 September, 2012; originally announced September 2012.

Comments: 2 video files attached, 4 pages, 1 figure. This article is submitted accompanying a video submitted to the Gallery of Fluid Motion as part of the 65th Division of Fluid Dynamics meeting of the American Physical Society (17-20 November, San Diego, CA, USA)

Toward reducing impact induced brain injury: Lessons from a computational study of army and football helmet pads

Authors: W. C. Moss, M. J. King, E. G. Blackman

Abstract: We use computational simulations to compare the impact response of different football and U.S. Army helmet pad materials. We conduct experiments to characterize the material response of different helmet pads. We simulate experimental helmet impact tests performed by the U.S. Army to validate our methods. We then simulate a cylindrical impactor striking different pads. The acceleration history of t… ▽ More We use computational simulations to compare the impact response of different football and U.S. Army helmet pad materials. We conduct experiments to characterize the material response of different helmet pads. We simulate experimental helmet impact tests performed by the U.S. Army to validate our methods. We then simulate a cylindrical impactor striking different pads. The acceleration history of the impactor is used to calculate the Head Injury Criterion for each pad. We conduct sensitivity studies exploring the effects of pad composition, geometry, and material stiffness. We find that: (1) The football pad materials do not outperform the currently used military pad material in militarily-relevant impact scenarios; (2) Optimal material properties for a pad depend on impact energy; and (3) Thicker pads perform better at all velocities. Our analysis suggests that by using larger helmet shells with correspondingly thicker pads, impact-induced traumatic brain injury may be significantly reduced. Keywords: helmet, pad, head injury, traumatic brain injury, head injury criterion, impact △ Less

Submitted 12 April, 2012; originally announced April 2012.

Comments: 24 pages, 12 figures, 1 table

Report number: LLNL-JRNL-490182-DRAFT

Journal ref: Computer Methods in Biomechanics and Biomedical Engineering (2012)

The G0 Experiment: Apparatus for Parity-Violating Electron Scattering Measurements at Forward and Backward Angles

Authors: G0 Collaboration, D. Androic, D. S. Armstrong, J. Arvieux, R. Asaturyan, T. D. Averett, S. L. Bailey, G. Batigne, D. H. Beck, E. J. Beise, J. Benesch, F. Benmokhtar, L. Bimbot, J. Birchall, A. Biselli, P. Bosted, H. Breuer, P. Brindza, C. L. Capuano, R. D. Carlini, R. Carr, N. Chant, Y. -C. Chao, R. Clark, A. Coppens , et al. (105 additional authors not shown)

Abstract: In the G0 experiment, performed at Jefferson Lab, the parity-violating elastic scattering of electrons from protons and quasi-elastic scattering from deuterons is measured in order to determine the neutral weak currents of the nucleon. Asymmetries as small as 1 part per million in the scattering of a polarized electron beam are determined using a dedicated apparatus. It consists of specialized bea… ▽ More In the G0 experiment, performed at Jefferson Lab, the parity-violating elastic scattering of electrons from protons and quasi-elastic scattering from deuterons is measured in order to determine the neutral weak currents of the nucleon. Asymmetries as small as 1 part per million in the scattering of a polarized electron beam are determined using a dedicated apparatus. It consists of specialized beam-monitoring and control systems, a cryogenic hydrogen (or deuterium) target, and a superconducting, toroidal magnetic spectrometer equipped with plastic scintillation and aerogel Cerenkov detectors, as well as fast readout electronics for the measurement of individual events. The overall design and performance of this experimental system is discussed. △ Less

Submitted 3 March, 2011; originally announced March 2011.

Comments: Submitted to Nuclear Instruments and Methods

Journal ref: Nucl. Instrum. Methods A 646 (2011)59

Binary Fingerprints at Fluctuation-Enhanced Sensing

Authors: Hung-Chih Chang, Laszlo B. Kish, Maria D. King, Chiman Kwan

Abstract: We developed a simple way to generate binary patterns based on spectral slopes in different frequency ranges at fluctuation-enhanced sensing. Such patterns can be considered as binary "fingerprints" of odors. The method has experimentally been demonstrated with a commercial semiconducting metal oxide (Taguchi) sensor exposed to bacterial odors (Escherichia coli and Anthrax-surrogate Bacillus sub… ▽ More We developed a simple way to generate binary patterns based on spectral slopes in different frequency ranges at fluctuation-enhanced sensing. Such patterns can be considered as binary "fingerprints" of odors. The method has experimentally been demonstrated with a commercial semiconducting metal oxide (Taguchi) sensor exposed to bacterial odors (Escherichia coli and Anthrax-surrogate Bacillus subtilis) and processing their stochastic signals. With a single Taguchi sensor, the situations of empty chamber, tryptic soy agar (TSA) medium, or TSA with bacteria could be distinguished with 100% reproducibility. The bacterium numbers were in the range of 25 thousands to 1 million. To illustrate the relevance for ultra-low power consumption, we show that this new type of signal processing and pattern recognition task can be implemented by a simple analog circuitry and a few logic gates with total power consumption in the microWatts range. △ Less

Submitted 28 December, 2009; originally announced December 2009.

Comments: submitted for publication

Journal ref: Sensors 10(1) (2010) 361-373; www.mdpi.com/1424-8220/10/1/361

Fluctuation-Enhanced Sensing for Biological Agent Detection and Identification

Authors: Laszlo B. Kish, Hung C. Chang, Maria D. King, Chiman Kwan, James O. Jensen, Gabor Schmera, Janusz Smulko, Zoltan Gingl, Claes G. Granqvist

Abstract: We survey and show our earlier results about three different ways of fluctuation-enhanced sensing of bio agent, the phage-based method for bacterium detection published earlier; sensing and evaluating the odors of microbes; and spectral and amplitude distribution analysis of noise in light scattering to identify spores based on their diffusion coefficient. We survey and show our earlier results about three different ways of fluctuation-enhanced sensing of bio agent, the phage-based method for bacterium detection published earlier; sensing and evaluating the odors of microbes; and spectral and amplitude distribution analysis of noise in light scattering to identify spores based on their diffusion coefficient. △ Less

Submitted 29 July, 2010; v1 submitted 28 December, 2009; originally announced December 2009.

Comments: Invited paper for a special issue of IEEE Nanotechnology. It was Plenary Talk at the Nanoelectronic Devices for Defense and Security Conference, Fort Lauderdale, FL, October 1, 2009

Journal ref: IEEE Nanotechnology 10 (2011) 1238-42

Identification of Bacteria by Patterns Generated from Odor Spectra

Authors: Hung-Chih Chang, Laszlo B. Kish, Maria D. King, Chiman Kwan

Abstract: We use the power density spectra obtained by fluctuation-enhanced sensing of bacterial odors (Escherichia coli and Anthrax-surrogate Bacillus subtilis) to generate new, highly distinguishable, types of patterns based on the average slope of the spectra in different frequency ranges. Such plots can be considered as "fingerprints" of bacterial odors. Three different ways of pattern generation are… ▽ More We use the power density spectra obtained by fluctuation-enhanced sensing of bacterial odors (Escherichia coli and Anthrax-surrogate Bacillus subtilis) to generate new, highly distinguishable, types of patterns based on the average slope of the spectra in different frequency ranges. Such plots can be considered as "fingerprints" of bacterial odors. Three different ways of pattern generation are tested, including a simple binary version. The obtained patterns are simple enough to identify the situation by the naked eye without a pattern recognizer. △ Less

Submitted 9 February, 2009; originally announced February 2009.

Comments: Continuation of paper arXiv:0901.3100

Journal ref: Sensors and Actuators B 142 (2009) pp. 429-434

Fluctuation-Enhanced Sensing of Bacterium Odors

Authors: Hung-Chih Chang, Laszlo B. Kish, Maria D. King, Chiman Kwan

Abstract: The goal of this paper is to explore the possibility to detect and identify bacteria by sensing their odor via fluctuation-enhanced sensing with commercial Taguchi sensors. The fluctuations of the electrical resistance during exposure to different bacterial odors, Escherichia coli and anthrax-surrogate Bacillus subtilis, have been measured and analyzed. In the present study, the simplest method,… ▽ More The goal of this paper is to explore the possibility to detect and identify bacteria by sensing their odor via fluctuation-enhanced sensing with commercial Taguchi sensors. The fluctuations of the electrical resistance during exposure to different bacterial odors, Escherichia coli and anthrax-surrogate Bacillus subtilis, have been measured and analyzed. In the present study, the simplest method, the measurement and analysis of power density spectra was used. The sensors were run in the normal heated and the sampling-and-hold working modes, respectively. The results indicate that Taguchi sensors used in these fluctuation-enhanced modes are effective tools of bacterium detection and identification even when they are utilizing only the power density spectrum of the stochastic sensor signal. △ Less

Submitted 22 January, 2009; v1 submitted 20 January, 2009; originally announced January 2009.

Comments: reference error fixed

Skull Flexure from Blast Waves: A Mechanism for Brain Injury with Implications for Helmet Design

Authors: William C. Moss, Michael J. King, Eric G. Blackman

Abstract: Traumatic brain injury [TBI] has become a signature injury of current military conflicts, with debilitating, costly, and long-lasting effects. Although mechanisms by which head impacts cause TBI have been well-researched, the mechanisms by which blasts cause TBI are not understood. From numerical hydrodynamic simulations, we have discovered that non-lethal blasts can induce sufficient skull flex… ▽ More Traumatic brain injury [TBI] has become a signature injury of current military conflicts, with debilitating, costly, and long-lasting effects. Although mechanisms by which head impacts cause TBI have been well-researched, the mechanisms by which blasts cause TBI are not understood. From numerical hydrodynamic simulations, we have discovered that non-lethal blasts can induce sufficient skull flexure to generate potentially damaging loads in the brain, even without a head impact. The possibility that this mechanism may contribute to TBI has implications for injury diagnosis and armor design. △ Less

Submitted 20 August, 2009; v1 submitted 19 September, 2008; originally announced September 2008.

Comments: version in press, Physical Review Letters; 17 pages, 5 figures (includes supplementary material)

Report number: LLNL-JRNL-412717

Journal ref: Physical Review Letters (2009)

Interactions Between Stably Rolling Leukocytes In Vivo

Authors: Michael R. King, Aimee D. Ruscio, Michael B. Kim, Ingrid H. Sarelius

Abstract: We have characterized the two-dimensional spatial dependence of the hydrodynamic interactions between two adhesively rolling leukocytes in a live venule in the mouse cremaster muscle. Two rolling leukocytes were observed to slow each other down when rolling together in close proximity, due to mutual sheltering from the external blood flow in the vessel lumen. These results are in agreement with… ▽ More We have characterized the two-dimensional spatial dependence of the hydrodynamic interactions between two adhesively rolling leukocytes in a live venule in the mouse cremaster muscle. Two rolling leukocytes were observed to slow each other down when rolling together in close proximity, due to mutual sheltering from the external blood flow in the vessel lumen. These results are in agreement with a previous study of leukocyte rolling interactions using carbohydrate-coated beads in a parallel-plate flow chamber and a detailed computer model of adhesion in a multicellular environment. △ Less

Submitted 16 October, 2003; originally announced October 2003.

Comments: 9 pages, 2 figures, submitted as Brief Report to Phys. Rev. E