-
Graphene-Quantum Dots Hybrid Photodetectors with Low Dark-Current Readout
Authors:
D. De Fazio,
B. Uzlu,
I. Torre,
C. Monasterio,
S. Gupta,
T. Khodkov,
Y. Bi,
Z. Wang,
M. Otto,
M. C. Lemme,
S. Goossens,
D. Neumaier,
F. H. L. Koppens
Abstract:
Graphene-based photodetectors have shown responsivities up to 10$^8$A/W and photoconductive gains up to 10$^{8}$ electrons per photon. These photodetectors rely on a highly absorbing layer in close proximity of graphene, which induces a shift of the graphene chemical potential upon absorption, hence modifying its channel resistance. However, due to the semi-metallic nature of graphene, the readout…
▽ More
Graphene-based photodetectors have shown responsivities up to 10$^8$A/W and photoconductive gains up to 10$^{8}$ electrons per photon. These photodetectors rely on a highly absorbing layer in close proximity of graphene, which induces a shift of the graphene chemical potential upon absorption, hence modifying its channel resistance. However, due to the semi-metallic nature of graphene, the readout requires dark currents of hundreds of $μ$A up to mA, leading to high power consumption needed for the device operation. Here we propose a novel approach for highly responsive graphene-based photodetectors with orders of magnitude lower dark current levels. A shift of the graphene chemical potential caused by light absorption in a layer of colloidal quantum dots, induces a variation of the current flowing across a metal-insulator-graphene diode structure. Owing to the low density of states of graphene near the neutrality point, the light-induced shift in chemical potential can be relatively large, dramatically changing the amount of current flowing across the insulating barrier, and giving rise to a novel type of gain mechanism. This readout requires dark currents of hundreds of nA up to few $μ$A, orders of magnitude lower than other graphene-based photodetectors, while keeping responsivities of $\sim$70A/W in the infrared, almost two orders of magnitude higher compared to established germanium on silicon and indium gallium arsenide infrared photodetectors. This makes the device appealing for applications where high responsivity and low power consumption are required.
△ Less
Submitted 21 May, 2020;
originally announced May 2020.
-
Far-field Excitation of Single Graphene Plasmon Cavities with Ultra-compressed Mode-volumes
Authors:
Itai Epstein,
David Alcaraz,
Zhiqin Huang,
Varun-Varma Pusapati,
Jean-Paul Hugonin,
Avinash Kumar,
Xander Deputy,
Tymofiy Khodkov,
Tatiana G. Rappoport,
Nuno M. R. Peres,
David R. Smith,
Frank H. L. Koppens
Abstract:
Acoustic-graphene-plasmons (AGPs) are highly confined electromagnetic modes, carrying large momentum and low loss in the mid-infrared/Terahertz spectra. Owing to their ability to confine light to extremely small dimensions, they bear great potential for ultra-strong light-matter interactions in this long wavelength regime, where molecular fingerprints reside. However, until now AGPs have been rest…
▽ More
Acoustic-graphene-plasmons (AGPs) are highly confined electromagnetic modes, carrying large momentum and low loss in the mid-infrared/Terahertz spectra. Owing to their ability to confine light to extremely small dimensions, they bear great potential for ultra-strong light-matter interactions in this long wavelength regime, where molecular fingerprints reside. However, until now AGPs have been restricted to micron-scale areas, reducing their confinement potential by several orders-of-magnitude. Here, by utilizing a new type of graphene-based magnetic-resonance, we realize single, nanometric-scale AGP cavities, reaching record-breaking mode-volume confinement factors of $\thicksim5\cdot10^{-10}$. This AGP cavity acts as a mid-infrared nanoantenna, which is efficiently excited from the far-field, and electrically tuneble over an ultra-broadband spectrum. Our approach provides a new platform for studying ultra-strong-coupling phenomena, such as chemical manipulation via vibrational-strong-coupling, and a path to efficient detectors and sensors, in this challenging spectral range.
△ Less
Submitted 11 February, 2020; v1 submitted 2 February, 2020;
originally announced February 2020.
-
Integrated impedance bridge for absolute capacitance measurements at cryogenic temperatures and finite magnetic fields
Authors:
G. J. Verbiest,
H. Janssen,
D. Xu,
X. Ge,
M. Goldsche,
J. Sonntag,
T. Khodkov,
L. Banszerus,
N. von den Driesch,
D. Buca,
K. Watanabe,
T. Taniguchi,
C. Stampfer
Abstract:
We developed an impedance bridge that operates at cryogenic temperatures (down to 60 mK) and in perpendicular magnetic fields up to at least 12 T. This is achieved by mounting a GaAs HEMT amplifier perpendicular to a printed circuit board containing the device under test and thereby parallel to the magnetic field. The measured amplitude and phase of the output signal allows for the separation of t…
▽ More
We developed an impedance bridge that operates at cryogenic temperatures (down to 60 mK) and in perpendicular magnetic fields up to at least 12 T. This is achieved by mounting a GaAs HEMT amplifier perpendicular to a printed circuit board containing the device under test and thereby parallel to the magnetic field. The measured amplitude and phase of the output signal allows for the separation of the total impedance into an absolute capacitance and a resistance. Through a detailed noise characterization, we find that the best resolution is obtained when operating the HEMT amplifier at the highest gain. We obtained a resolution in the absolute capacitance of 6.4~aF$/\sqrt{\textrm{Hz}}$ at 77 K on a comb-drive actuator, while maintaining a small excitation amplitude of 15~$k_\text{B} T/e$. We show the magnetic field functionality of our impedance bridge by measuring the quantum Hall plateaus of a top-gated hBN/graphene/hBN heterostructure at 60~mK with a probe signal of 12.8~$k_\text{B} T/e$.
△ Less
Submitted 27 June, 2019; v1 submitted 17 January, 2019;
originally announced January 2019.
-
Fabrication of comb-drive actuators for straining nanostructured suspended graphene
Authors:
M. Goldsche,
G. J. Verbiest,
T. Khodkov,
J. Sonntag,
N. von den Driesch,
D. Buca,
C. Stampfer
Abstract:
We report on the fabrication and characterization of an optimized comb-drive actuator design for strain-dependent transport measurements on suspended graphene. We fabricate devices from highly p-doped silicon using deep reactive ion etching with a chromium mask. Crucially, we implement a gold layer to reduce the device resistance from $\approx51.6$ k$\mathrmΩ$ to $\approx236$ $\mathrmΩ$ at room te…
▽ More
We report on the fabrication and characterization of an optimized comb-drive actuator design for strain-dependent transport measurements on suspended graphene. We fabricate devices from highly p-doped silicon using deep reactive ion etching with a chromium mask. Crucially, we implement a gold layer to reduce the device resistance from $\approx51.6$ k$\mathrmΩ$ to $\approx236$ $\mathrmΩ$ at room temperature in order to allow for strain-dependent transport measurements. The graphene is integrated by mechanically transferring it directly onto the actuator using a polymethylmethacrylate membrane. Importantly, the integrated graphene can be nanostructured afterwards to optimize device functionality. The minimum feature size of the structured suspended graphene is 30 nm, which allows for interesting device concepts such as mechanically-tunable nanoconstrictions. Finally, we characterize the fabricated devices by measuring the Raman spectrum as well as the a mechanical resonance frequency of an integrated graphene sheet for different strain values.
△ Less
Submitted 7 June, 2018; v1 submitted 11 April, 2018;
originally announced April 2018.
-
Detecting Ultrasound Vibrations by Graphene Resonators
Authors:
G. J. Verbiest,
J. N. Kirchhof,
J. Sonntag,
M. Goldsche,
T. Khodkov,
C. Stampfer
Abstract:
Ultrasound detection is one of the most important nondestructive subsurface characterization tools of materials, whose goal is to laterally resolve the subsurface structure with nanometer or even atomic resolution. In recent years, graphene resonators attracted attention as loudspeaker and ultrasound radio, showing its potential to realize communication systems with air-carried ultrasound. Here we…
▽ More
Ultrasound detection is one of the most important nondestructive subsurface characterization tools of materials, whose goal is to laterally resolve the subsurface structure with nanometer or even atomic resolution. In recent years, graphene resonators attracted attention as loudspeaker and ultrasound radio, showing its potential to realize communication systems with air-carried ultrasound. Here we show a graphene resonator that detects ultrasound vibrations propagating through the substrate on which it was fabricated. We achieve ultimately a resolution of $\approx7$~pm/$\mathrm{\sqrt Hz}$ in ultrasound amplitude at frequencies up to 100~MHz. Thanks to an extremely high nonlinearity in the mechanical restoring force, the resonance frequency itself can also be used for ultrasound detection. We observe a shift of 120~kHz at a resonance frequency of 65~MHz for an induced vibration amplitude of 100~pm with a resolution of 25~pm. Remarkably, the nonlinearity also explains the generally observed asymmetry in the resonance frequency tuning of the resonator when pulled upon with an electrostatic gate. This work puts forward a sensor design that fits onto an atomic force microscope cantilever and therefore promises direct ultrasound detection at the nanoscale for nondestructive subsurface characterization.
△ Less
Submitted 22 June, 2018; v1 submitted 6 February, 2018;
originally announced February 2018.
-
Tailoring mechanically-tunable strain fields in graphene
Authors:
M. Goldsche,
J. Sonntag,
T. Khodkov,
G. Verbiest,
S. Reichardt,
C. Neumann,
T. Ouaj,
N. von den Driesch,
D. Buca,
C. Stampfer
Abstract:
There are a number of theoretical proposals based on strain engineering of graphene and other two-dimensional materials, however purely mechanical control of strain fields in these systems has remained a major challenge. The two approaches mostly used so far either couple the electrical and mechanical properties of the system simultaneously or introduce some unwanted disturbances due to the substr…
▽ More
There are a number of theoretical proposals based on strain engineering of graphene and other two-dimensional materials, however purely mechanical control of strain fields in these systems has remained a major challenge. The two approaches mostly used so far either couple the electrical and mechanical properties of the system simultaneously or introduce some unwanted disturbances due to the substrate. Here, we report on silicon micro-machined comb-drive actuators to controllably and reproducibly induce strain in a suspended graphene sheet, in an entirely mechanical way. We use spatially resolved confocal Raman spectroscopy to quantify the induced strain, and we show that different strain fields can be obtained by engineering the clamping geometry, including tunable strain gradients of up to 1.4 %/$μ$m. Our approach also allows for multiple axis straining and is equally applicable to other two-dimensional materials, opening the door to an investigating their mechanical and electromechanical properties. Our measurements also clearly identify defects at the edges of a graphene sheet as being weak spots responsible for its mechanical failure.
△ Less
Submitted 13 November, 2017;
originally announced November 2017.
