-
Picosecond laser induced hybrid groove structures on Ti6Al4V bio-alloy to accelerate osseointegration
Authors:
Sunita Kedia,
Rahul Checker,
Santosh Kumar Sandur,
J. Padma Nilaya
Abstract:
Regulating cell growth, extracellular matrix deposition and mineralization of artificial implants are some important parameters that decide the longevity of implants in the body. Picosecond laser induced hybrid groove structures have been shown to improve these properties of the Ti6Al4V bio-alloy. Two hybrid structures containing groove patterns with periodic and non-periodic substructures therein…
▽ More
Regulating cell growth, extracellular matrix deposition and mineralization of artificial implants are some important parameters that decide the longevity of implants in the body. Picosecond laser induced hybrid groove structures have been shown to improve these properties of the Ti6Al4V bio-alloy. Two hybrid structures containing groove patterns with periodic and non-periodic substructures therein were generated on Ti6Al4V by varying the extent of laser pulse overlapping on sample surface. Laser induced alteration in surface topography, chemical composition and wettability of Ti6Al4V resulted in 3-fold increase in the rate of hydroxyapatite growth, 2.5-fold increment in protein adsorption and 2-fold enhancement in cell adhesion in comparison to pristine sample. While the periodic substructure was found to guide cell growth, the non periodic sub structure offered homogenous growth leading to higher overall cell density on the substrate surface.
△ Less
Submitted 25 August, 2022;
originally announced September 2022.
-
Potential Tribological and Antibacterial Benefits of Pulsed Laser Deposited Zirconia Thin Film on Ti6Al4V Bio-alloy
Authors:
S. Kedia,
A. Das,
B. S. Patro,
J. P. Nilaya
Abstract:
Demand for artificial body implants has been on the rise over the years. However, wear and bacterial infection are identified as two major reasons that can lead to inflammation and implant failure. In this communication, the advantages of pulsed laser deposited zirconia thin film on Ti6Al4V bio-alloy at room temperature and at an elevated substrate temperature are discussed wherein a comparison of…
▽ More
Demand for artificial body implants has been on the rise over the years. However, wear and bacterial infection are identified as two major reasons that can lead to inflammation and implant failure. In this communication, the advantages of pulsed laser deposited zirconia thin film on Ti6Al4V bio-alloy at room temperature and at an elevated substrate temperature are discussed wherein a comparison of the change in surface roughness, wettability, surface free energy, tribological and antibacterial properties of uncoated and zirconia coated Ti6Al4V samples is presented. The results of tribological analysis carried out using a standard ball-on-disc tribometer at different loads (2N, 5N and 7N) exhibited advantageous effects of zirconia coating on Ti6Al4V. Prominently, the sample coated at 200 C substrate temperature maintained very low coefficient of friction up to hundreds of sliding cycles and showed a notable reduction in the wear rate by 49% at 5N load. The in vitro bacterial retention test showed a clear inhibition in growth of Staphylococcus aureus and Klebsiella pneumonia bacteria on the surface of the coated samples indicating the possibility of prevention of biofilm formation. More than 50% reduction in density of Staphylococcus aureus was observed on coated sample in comparison to pristine Ti6Al4V and this can be attributed to reduction in surface energy of the sample after coating. Additionally, the observation of a larger number of decimated bacteria on coated samples by fluorescence microscopy revealed superior antibacterial properties of zirconia coating. The novelty of this work is the use of pulsed laser deposition technique for zirconia coating which dearly improves tribological and antibacterial properties of Ti6Al4V simultaneously; this shows prospects of increasing durability of artificial implant in the human body.
△ Less
Submitted 9 February, 2022;
originally announced February 2022.
-
Surface texturing of Ti6Al4V alloy using femtosecond laser for superior antibacterial performance
Authors:
Shazia Shaikh,
Sunita Kedia,
Deepti Singh,
Mahesh Subramanian,
Sucharita Sinha
Abstract:
Titanium and its alloy are most widely used implant materials in dental and orthopaedic fields. However, infections occurring during implantation leads to implant failure in most of the cases. Here, we have demonstrated antibacterial behavior of Ti6Al4V alloy achieved when surface modified using femtosecond laser beam. Post laser treatment conical microstructures were observed on the Ti6Al4V alloy…
▽ More
Titanium and its alloy are most widely used implant materials in dental and orthopaedic fields. However, infections occurring during implantation leads to implant failure in most of the cases. Here, we have demonstrated antibacterial behavior of Ti6Al4V alloy achieved when surface modified using femtosecond laser beam. Post laser treatment conical microstructures were observed on the Ti6Al4V alloy surface. Generation of different sub-oxide phases of titanium dioxide were detected on laser treated samples using X-ray diffraction and X-ray photoelectron spectroscopy. Wettability of Ti6Al4V alloy surface changed significantly after interaction with the laser. Adhesion and growth of two gram positive; Staphylococcus aureus and Streptococcus mutans and one gram negative Pseudomonas aeruginosa bacteria have been explored on pristine, as well as, on laser textured Ti6Al4V alloy surfaces. In-vitro investigation on agar plate showed inhibition of bacterial growth on most of the laser treated surface. Superior surface roughness and occurrence of magneli phases of titanium dioxide on laser treated surface were probably responsible for the antibacterial behavior exhibited by the laser treated samples. Therefore, femtosecond laser surface treatment of Ti6Al4V alloy could find potential application in the development of infection free medical implants for dental and orthopedic usages.
△ Less
Submitted 21 February, 2018;
originally announced February 2018.
-
Random Lasing from Dyed Polystyrene Spheres in Disordered Environment
Authors:
Sunita Kedia,
Sucharita Sinha
Abstract:
Advance designs of random lasers towards development of miniature laser systems are in demand. We demonstrated random lasing from Rhodamine-B dye attached to polystyrene micro-spheres. Bare polystyrene spheres were used as scatterers and these provided optical feedback to the gain. Random lasing was successfully demonstrated in two different disordered environments, in binary colloidal mixture sol…
▽ More
Advance designs of random lasers towards development of miniature laser systems are in demand. We demonstrated random lasing from Rhodamine-B dye attached to polystyrene micro-spheres. Bare polystyrene spheres were used as scatterers and these provided optical feedback to the gain. Random lasing was successfully demonstrated in two different disordered environments, in binary colloidal mixture solution and in photonic glass. Incoherent feedback occurred in both the cases and single wavelength lasing were obtained. The lasing threshold in case of photonic glass was lower in comparison to binary colloidal mixture solution. This was because of higher index contrast and larger filling fraction of micro-particles in case of photonic glass. Longer fluorescence lifetime of embedded dye was observed in photonic glass environment in comparison to ethanolic solution of the Rhodamine-B dye. Lasing results obtained for photonic glass were compared with our previous results of Bloch lasing in photonic crystal synthesized using similar dye doped polystyrene micro-spheres.
△ Less
Submitted 5 December, 2017;
originally announced December 2017.
-
Femtosecond laser induced surface modification for prevention of bacterial adhesion on 45S5 bioactive glass
Authors:
Shazia Shaikh,
Deepti Singh,
Mahesh Subramanian,
Sunita Kedia,
Anil Kumar Singh,
Kulwant Singh,
Nidhi Gupta,
Sucharita Sinha
Abstract:
Bacterial attachment and biofilm formation on implant surface has been a major concern in hospital and industrial environment. Prevention of bacterial infections of implant surface through surface treatment could be a potential solution and hence this has become a key area of research. In the present study, the antibacterial and biocompatible properties of femtosecond laser surface treated 45S5 bi…
▽ More
Bacterial attachment and biofilm formation on implant surface has been a major concern in hospital and industrial environment. Prevention of bacterial infections of implant surface through surface treatment could be a potential solution and hence this has become a key area of research. In the present study, the antibacterial and biocompatible properties of femtosecond laser surface treated 45S5 bioactive glass (BG) have been investigated. Adhesion and sustainability of both gram positive S. aureus and gram negative P.aeruginosa and E. coli nosocomial bacteria on untreated and laser treated BG samples has been explored. An imprint method has been used to visualize the growth of bacteria on the sample surface. We observed complete bacterial rejection potentially reducing risk of biofilm formation on laser treated surface. This was correlated with surface roughness, wettability and change in surface chemical composition of the samples before and after laser treatment. Biocompatibility of the laser treated BG was demonstrated by studying the anchoring and growth of human cervix cell line INT407. Our results demonstrate that, laser surface modification of BG enables enhanced bacterial rejection without affecting its biocompatibility towards growth of human cells on it. These results open a significantly potential approach towards use of laser in successfully imparting desirable characteristics to BG based bio-implants and devices.
△ Less
Submitted 20 June, 2017;
originally announced June 2017.
-
Surface Treatment of 45S5 Bio-glass using Femtosecond Laser to Achieve Superior Growth of Hydroxyapatite
Authors:
Shazia Shaikh,
Sunita Kedia,
Anil Kumar Singh,
Kuldeep Sharma,
Sucharita Sinha
Abstract:
45S5 Hench bio-glass (BG) has gained interest in research because of its potential clinical applications. Several studies in-vivo and in-vitro have been in progress to improve bio-integration efficiency of this glass. In present contribution, surface modification of Hench BG has been done employing a femtosecond (fs) laser beam, resulting in increased effective surface area of the sample. These su…
▽ More
45S5 Hench bio-glass (BG) has gained interest in research because of its potential clinical applications. Several studies in-vivo and in-vitro have been in progress to improve bio-integration efficiency of this glass. In present contribution, surface modification of Hench BG has been done employing a femtosecond (fs) laser beam, resulting in increased effective surface area of the sample. These surface modified samples were subsequently immersed in simulated body fluid for varying number of days and characterized using Scanning electron microscope, energy dispersive X-ray analysis, X-ray diffraction, and micro-Raman spectroscopy. In-vitro studies indicated superior growth of hydroxyapatite (HAP) layer on the laser treated samples in comparison to the untreated samples. Presence of strong XRD peaks confirmed faster growth of HAP on laser treated samples. Raman peaks, five times more intense and relatively narrower represented higher crystallinity of hydroxyapatite layer on laser treated BG.
△ Less
Submitted 18 October, 2016;
originally announced October 2016.
-
Random Laser Emission at Dual Wavelengths in a Donor-Acceptor Dye Mixture Solution
Authors:
Sunita Kedia,
Sucharita Sinha
Abstract:
The work was aimed to generate random laser emissions simultaneously at two wavelengths in a weakly scattering system containing mixture of binary dyes, rhodamine-B (Rh-B) and oxazine-170 (O-170) dispersed with ZnO nano-particles served as scattering centres. Random lasing performances for individual Rh-B dye were extensively studied for varying small signal gain/scatterer density and found lasing…
▽ More
The work was aimed to generate random laser emissions simultaneously at two wavelengths in a weakly scattering system containing mixture of binary dyes, rhodamine-B (Rh-B) and oxazine-170 (O-170) dispersed with ZnO nano-particles served as scattering centres. Random lasing performances for individual Rh-B dye were extensively studied for varying small signal gain/scatterer density and found lasing threshold significantly depend upon number density of dispersed nano-particles. In spite of inefficient pumping, we demonstrated possibility of random lasing in O-170 dye solution on account of resonance energy transfer from Rh-B dye served as donor. At optimum concentrations of fluorophores and scatterer in dye mixture solution, incoherent random lasing was effectively attained simultaneously at two wavelengths centered 90 nm apart. Dual-emission intensities, lasing thresholds and rate of amplifications were found to be equivalent for both donor and acceptor in dye mixture solution.
△ Less
Submitted 26 August, 2016;
originally announced August 2016.
