Showing 1–15 of 15 results for author: Keaveny, E

Undulatory swimming in suspensions and networks of flexible filaments

Authors: Adam K. Townsend, Eric E. Keaveny

Abstract: Many biological fluids are composed of suspended polymers immersed in a viscous fluid. A prime example is mucus, where the polymers are also known to form a network. While the presence of this microstructure is linked with an overall non-Newtonian response of the fluid, swimming cells and microorganisms similar in size to the network pores and polymer filaments instead experience the heterogeneous… ▽ More Many biological fluids are composed of suspended polymers immersed in a viscous fluid. A prime example is mucus, where the polymers are also known to form a network. While the presence of this microstructure is linked with an overall non-Newtonian response of the fluid, swimming cells and microorganisms similar in size to the network pores and polymer filaments instead experience the heterogeneous nature of the environment, interacting directly with the polymers as obstacles as they swim. To characterise and understand locomotion in these heterogeneous environments, we simulate the motion of an undulatory swimmer through 3D suspensions and networks of elastic filaments, exploring the effects of filament and link compliance and filament concentration up to 20\% volume fraction. For compliant environments, the swimming speed increases with filament concentration to values about 10\% higher than in a viscous fluid. In stiffer environments, a non-monotonic dependence is observed, with an initial increase in speed to values 5\% greater than in a viscous fluid, followed by a dramatic reduction to speeds just a fraction of its value in a viscous fluid. Velocity fluctuations are also more pronounced in stiffer environments. We demonstrate that speed enhancements are linked to hydrodynamic interactions with the microstructure, while reductions are due to the filaments restricting the amplitude of the swimmer's propulsive wave. Unlike previous studies where interactions with obstacles allowed for significant enhancements in swimming speeds, the modest enhancements seen here are more comparable to those given by models where the environment is treated as a continuous viscoelastic fluid. △ Less

Submitted 12 August, 2024; v1 submitted 16 March, 2024; originally announced March 2024.

Comments: 26 pages, 11 figures

Journal ref: J. Fluid Mech. 993 (2024) A10

Accelerating the force-coupling method for hydrodynamic interactions in periodic domains

Authors: Hang Su, Eric E Keaveny

Abstract: The efficient simulation of fluid-structure interactions at zero Reynolds number requires the use of fast summation techniques in order to rapidly compute the long-ranged hydrodynamic interactions between the structures. One approach for periodic domains involves utilising a compact or exponentially decaying kernel function to spread the force on the structure to a regular grid where the resulting… ▽ More The efficient simulation of fluid-structure interactions at zero Reynolds number requires the use of fast summation techniques in order to rapidly compute the long-ranged hydrodynamic interactions between the structures. One approach for periodic domains involves utilising a compact or exponentially decaying kernel function to spread the force on the structure to a regular grid where the resulting flow and interactions can be computed efficiently using an FFT-based solver. A limitation to this approach is that the grid spacing must be chosen to resolve the kernel and thus, these methods can become inefficient when the separation between the structures is large compared to the kernel width. In this paper, we address this issue for the force-coupling method (FCM) by introducing a modified kernel that can be resolved on a much coarser grid, and subsequently correcting the resulting interactions in a pairwise fashion. The modified kernel is constructed to ensure rapid convergence to the exact hydrodynamic interactions and a positive-splitting of the associated mobility matrix. We provide a detailed computational study of the methodology and establish the optimal choice of the modified kernel width, which we show plays a similar role to the splitting parameter in Ewald summation. Finally, we perform example simulations of rod sedimentation and active filament coordination to demonstrate the performance of fast FCM in application. △ Less

Submitted 4 March, 2024; v1 submitted 19 October, 2023; originally announced October 2023.

Bifurcations and nonlinear dynamics of the follower force model for active filaments

Authors: Bethany Clarke, Yongyun Hwang, Eric Keaveny

Abstract: Biofilament-motor protein complexes are ubiquitous in biology and drive the transport of cargo vital for many fundamental cellular processes. As they move, motor proteins exert compressive forces on the filaments to which they are attached, leading to buckling and a subsequent range of dynamics. The follower force model, in which a single compressive force is imposed at the filament tip, is the st… ▽ More Biofilament-motor protein complexes are ubiquitous in biology and drive the transport of cargo vital for many fundamental cellular processes. As they move, motor proteins exert compressive forces on the filaments to which they are attached, leading to buckling and a subsequent range of dynamics. The follower force model, in which a single compressive force is imposed at the filament tip, is the standard and most basic model for an elastic filament, such as a microtubule, driven by a motor protein. Depending on the force value, one can observe different states including whirling, beating and writhing, though the bifurcations giving rise to these states are not completely understood. In this paper, we utilise techniques from computational dynamical systems to determine and characterise these bifurcations. We track emerging time-periodic branches and identify new, quasiperiodic states. We investigate the effect of filament slenderness on the bifurcations and, in doing so, present a comprehensive overview of the dynamics which emerge in the follower force model. △ Less

Submitted 11 June, 2024; v1 submitted 12 September, 2023; originally announced September 2023.

Comments: 34 pages, 9 figures

Coordinated motion of active filaments on spherical surfaces

Authors: Timothy A Westwood, Eric E Keaveny

Abstract: Coordinated cilia are used throughout the natural world for micronscale fluid transport. They are often modelled with regular filament arrays on fixed, planar surfaces. Here, we simulate hundreds of interacting active filaments on spherical surfaces, where defects in the cilia displacement field must be present. We see synchronised beating towards or about two defects for spheres held fixed. Defec… ▽ More Coordinated cilia are used throughout the natural world for micronscale fluid transport. They are often modelled with regular filament arrays on fixed, planar surfaces. Here, we simulate hundreds of interacting active filaments on spherical surfaces, where defects in the cilia displacement field must be present. We see synchronised beating towards or about two defects for spheres held fixed. Defects alter filament beating which causes the sphere to move once released. This motion feeds back to the filaments resulting in a whirling state with metachronal behaviour along the equator. △ Less

Submitted 30 November, 2021; v1 submitted 28 September, 2021; originally announced September 2021.

A generalised drift-correcting time integration scheme for Brownian suspensions of rigid particles with arbitrary shape

Authors: Timothy A Westwood, Blaise Delmotte, Eric E Keaveny

Abstract: The efficient computation of the overdamped, random motion of micron and nanometre scale particles in a viscous fluid requires novel methods to obtain the hydrodynamic interactions, random displacements and Brownian drift at minimal cost. Capturing Brownian drift is done most efficiently through a judiciously constructed time-integration scheme that automatically accounts for its contribution to p… ▽ More The efficient computation of the overdamped, random motion of micron and nanometre scale particles in a viscous fluid requires novel methods to obtain the hydrodynamic interactions, random displacements and Brownian drift at minimal cost. Capturing Brownian drift is done most efficiently through a judiciously constructed time-integration scheme that automatically accounts for its contribution to particle motion. In this paper, we present a generalised drift-correcting (gDC) scheme that accounts for Brownian drift for suspensions of rigid particles with arbitrary shape. The scheme seamlessly integrates with fast methods for computing the hydrodynamic interactions and random increments and requires a single full mobility solve per time-step. As a result, the gDC provides increased computational efficiency when used in conjunction with grid-based methods that employ fluctuating hydrodynamics to obtain the random increments. Further, for these methods the additional computations that the scheme requires occur at the level of individual particles, and hence lend themselves naturally to parallel computation. We perform a series of simulations that demonstrate the gDC obtains similar levels of accuracy as compared with the existing state-of-the-art. In addition, these simulations illustrate the gDC's applicability to a wide array of relevant problems involving Brownian suspensions of non-spherical particles, such as the structure of liquid crystals and the rheology of complex fluids. △ Less

Submitted 1 June, 2021; originally announced June 2021.

Comments: 32 pages and 11 figures

Spontaneous onset of convection in a uniform phoretic channel

Authors: Sébastien Michelin, Simon Game, Eric Lauga, Eric Keaveny, Demetrios Papageourgiou

Abstract: Phoretic mechanisms, whereby gradients of chemical solutes induce surface-driven flows, have recently been used to generate directed propulsion of patterned colloidal particles. When the chemical solutes diffuse slowly, an instability further provides active but isotropic particles with a route to self-propulsion by spontaneously breaking the symmetry of the solute distribution. Here we show theor… ▽ More Phoretic mechanisms, whereby gradients of chemical solutes induce surface-driven flows, have recently been used to generate directed propulsion of patterned colloidal particles. When the chemical solutes diffuse slowly, an instability further provides active but isotropic particles with a route to self-propulsion by spontaneously breaking the symmetry of the solute distribution. Here we show theoretically that, in a mechanism analogous to Bénard-Marangoni convection, phoretic phenomena can create spontaneous and self-sustained wall-driven mixing flows within a straight, chemically-uniform active channel. Such spontaneous flows do not result in any net pumping for a uniform channel but greatly modify the distribution of transport of the chemical solute. The instability is predicted to occur for a solute Péclet number above a critical value and for a band of finite perturbation wavenumbers. We solve the perturbation problem analytically to characterize the instability, and use both steady and unsteady numerical computations of the full nonlinear transport problem to capture the long-time coupled dynamics of the solute and flow within the channel. △ Less

Submitted 16 December, 2019; originally announced December 2019.

Comments: 15 pages, 11 figures, to appear in Soft Matter

Methods for suspensions of passive and active filaments

Authors: S. F. Schoeller, A. K. Townsend, T. A. Westwood, E. E. Keaveny

Abstract: Flexible filaments and fibres are essential components of important complex fluids that appear in many biological and industrial settings. Direct simulations of these systems that capture the motion and deformation of many immersed filaments in suspension remain a formidable computational challenge due to the complex, coupled fluid--structure interactions of all filaments, the numerical stiffness… ▽ More Flexible filaments and fibres are essential components of important complex fluids that appear in many biological and industrial settings. Direct simulations of these systems that capture the motion and deformation of many immersed filaments in suspension remain a formidable computational challenge due to the complex, coupled fluid--structure interactions of all filaments, the numerical stiffness associated with filament bending, and the various constraints that must be maintained as the filaments deform. In this paper, we address these challenges by describing filament kinematics using quaternions to resolve both bending and twisting, applying implicit time-integration to alleviate numerical stiffness, and using quasi-Newton methods to obtain solutions to the resulting system of nonlinear equations. In particular, we employ geometric time integration to ensure that the quaternions remain unit as the filaments move. We also show that our framework can be used with a variety of models and methods, including matrix-free fast methods, that resolve low Reynolds number hydrodynamic interactions. We provide a series of tests and example simulations to demonstrate the performance and possible applications of our method. Finally, we provide a link to a MATLAB/Octave implementation of our framework that can be used to learn more about our approach and as a tool for filament simulation. △ Less

Submitted 24 September, 2020; v1 submitted 29 March, 2019; originally announced March 2019.

MSC Class: 74F10

The instability of gyrotactically-trapped cell layers

Authors: Smitha Maretvadakethope, Eric E. Keaveny, Yongyun Hwang

Abstract: Several meters below the coastal ocean surface there are areas of high ecological activity that contain thin layers of concentrated motile phytoplankton. Gyrotactic trapping has been proposed as a potential mechanism for layer formation of bottom-heavy swimming algae cells, especially in flows where the vorticity varies linearly with depth (Durham, Stocker & Kessler, Science, vol. 323, 2009, pp. 1… ▽ More Several meters below the coastal ocean surface there are areas of high ecological activity that contain thin layers of concentrated motile phytoplankton. Gyrotactic trapping has been proposed as a potential mechanism for layer formation of bottom-heavy swimming algae cells, especially in flows where the vorticity varies linearly with depth (Durham, Stocker & Kessler, Science, vol. 323, 2009, pp. 1067-1070). Using a continuum model for dilute microswimmer suspensions, we report that an instability of a gyrotactically trapped cell-layer can arise in a pressure-driven plane channel flow. The linear stability analysis reveals that the equilibrium cell-layer solution is hydrodynamically unstable due to negative microswimmer buoyancy (i.e. a gravitational instability) over a range of biologically relevant parameter values. The critical cell concentration for this instability is found to be $N_c\simeq 10^4\textrm{cells}/\textrm{cm}^{3}$, a value comparable to the typical maximum cell concentration observed in thin layers. This result indicates that the instability may be a potential mechanism for limiting the layer's maximum cell concentration, especially in regions where turbulence is weak, and motivates the study of its nonlinear evolution, perhaps, in the presence of turbulence. △ Less

Submitted 19 March, 2019; v1 submitted 30 November, 2018; originally announced November 2018.

Comments: 13 pages, 5 figures

Enhanced locomotion, effective diffusion, and trapping of undulatory micro-swimmers in heterogeneous environments

Authors: Arshad Kamal, Eric E Keaveny

Abstract: Swimming cells and microorganisms must often move though complex fluids that contain an immersed microstructure such as polymer molecules, or filaments. In many important biological processes, such as mammalian reproduction and bacterial infection, the size of the immersed microstructure is comparable to that of the swimming cells. This leads to discrete swimmer-microstructure interactions that al… ▽ More Swimming cells and microorganisms must often move though complex fluids that contain an immersed microstructure such as polymer molecules, or filaments. In many important biological processes, such as mammalian reproduction and bacterial infection, the size of the immersed microstructure is comparable to that of the swimming cells. This leads to discrete swimmer-microstructure interactions that alter the swimmer's path and speed. In this paper, we use a combination of detailed simulation and data-driven stochastic models to examine the motion of a planar undulatory swimmer in an environment of spherical obstacles tethered via linear springs to random points in the plane of locomotion. We find that depending on environmental parameters, the interactions with the obstacles can both enhance swimming speeds, as well as prevent the swimmer from moving at all. We also show how the discrete interactions produce translational and angular velocity fluctuations that over time lead to diffusive behaviour primarily due to the coupling of swimming and rotational diffusion. Our results demonstrate that direct swimmer-microstructure interactions can produce changes in swimmer motion that may have important implications to the spreading of cell populations in, or the trapping of harmful pathogens by complex fluids. △ Less

Submitted 3 August, 2018; originally announced August 2018.

From flagellar undulations to collective motion: predicting the dynamics of sperm suspensions

Authors: S. F. Schoeller, E. E. Keaveny

Abstract: Swimming cells and microorganisms are as diverse in their collective dynamics as they are in their individual shapes and propulsion mechanisms. Even for sperm cells, which have a stereotyped shape consisting of a cell body connected to a flexible flagellum, a wide range of collective dynamics is observed spanning from the formation of tightly packed groups to the display of larger-scale, turbulenc… ▽ More Swimming cells and microorganisms are as diverse in their collective dynamics as they are in their individual shapes and propulsion mechanisms. Even for sperm cells, which have a stereotyped shape consisting of a cell body connected to a flexible flagellum, a wide range of collective dynamics is observed spanning from the formation of tightly packed groups to the display of larger-scale, turbulence-like motion. Using a detailed mathematical model that resolves flagellum dynamics, we perform simulations of sperm suspensions containing up to 1000 cells and explore the connection between individual and collective dynamics. We find that depending on the level of variation in individual dynamics from one swimmer to another, the sperm exhibit either a strong tendency to aggregate, or the suspension exhibits large-scale swirling. Hydrodynamic interactions govern the formation and evolution of both states. In addition, a quantitative analysis of the states reveals that the flows generated at the time-scale of flagellum undulations contribute significantly to the overall energy in the surrounding fluid, highlighting the importance of resolving these flows. △ Less

Submitted 24 January, 2018; originally announced January 2018.

MSC Class: 76Z10

Journal ref: J. Roy. Soc. Interface 15.140 (2018)

Simulations of Brownian tracer transport in squirmer suspensions

Authors: Blaise Delmotte, Eric E Keaveny, Eric Climent, Franck Plouraboué

Abstract: In addition to enabling movement towards environments with favourable living conditions, swimming by microorganisms has also been linked to enhanced mixing and improved nutrient uptake by their populations. Experimental studies have shown that Brownian tracer particles exhibit enhanced diffusion due to the swimmers, while theoretical models have linked this increase in diffusion to the flows gener… ▽ More In addition to enabling movement towards environments with favourable living conditions, swimming by microorganisms has also been linked to enhanced mixing and improved nutrient uptake by their populations. Experimental studies have shown that Brownian tracer particles exhibit enhanced diffusion due to the swimmers, while theoretical models have linked this increase in diffusion to the flows generated by the swimming microorganisms, as well as collisions with the swimmers. In this study, we perform detailed simulations based on the force-coupling method and its recent extensions to the swimming and Brownian particles to examine tracer displacements and effective tracer diffusivity in squirmer suspensions. By isolating effects such as hydrodynamic or steric interactions, we provide physical insight into experimental measurements of the tracer displacement distribution. In addition, we extend results to the semi-dilute regime where the swimmer-swimmer interactions affect tracer transport and the effective tracer diffusivity no longer scales linearly with the swimmer volume fraction. △ Less

Submitted 4 November, 2017; originally announced November 2017.

Simulating Brownian suspensions with fluctuating hydrodynamics

Authors: Blaise Delmotte, Eric E Keaveny

Abstract: Fluctuating hydrodynamics has been successfully combined with several computational methods to rapidly compute the correlated random velocities of Brownian particles. In the overdamped limit where both particle and fluid inertia are ignored, one must also account for a Brownian drift term in order to successfully update the particle positions. In this paper, we present an efficient computational m… ▽ More Fluctuating hydrodynamics has been successfully combined with several computational methods to rapidly compute the correlated random velocities of Brownian particles. In the overdamped limit where both particle and fluid inertia are ignored, one must also account for a Brownian drift term in order to successfully update the particle positions. In this paper, we present an efficient computational method for the dynamic simulation of Brownian suspensions with fluctuating hydrodynamics that handles both computations and provides a similar approximation as Stokesian Dynamics for dilute and semidilute suspensions. This advancement relies on combining the fluctuating force-coupling method (FCM) with a new midpoint time-integration scheme we refer to as the drifter-corrector (DC). The DC resolves the drift term for fluctuating hydrodynamics-based methods at a minimal computational cost when constraints are imposed on the fluid flow to obtain the stresslet corrections to the particle hydrodynamic interactions. With the DC, this constraint need only be imposed once per time step, reducing the simulation cost to nearly that of a completely deterministic simulation. By performing a series of simulations, we show that the DC with fluctuating FCM is an effective and versatile approach as it reproduces both the equilibrium distribution and the evolution of particulate suspensions in periodic as well as bounded domains. In addition, we demonstrate that fluctuating FCM coupled with the DC provides an efficient and accurate method for large-scale dynamic simulation of colloidal dispersions and the study of processes such as colloidal gelation. △ Less

Submitted 21 October, 2015; v1 submitted 8 July, 2015; originally announced July 2015.

Large-scale simulation of steady and time-dependent active suspensions with the force-coupling method

Authors: Blaise Delmotte, Eric Keaveny, Franck Plouraboue, Eric Climent

Abstract: We present a new development of the force-coupling method (FCM) to address the accurate simulation of a large number of interacting micro-swimmers. Our approach is based on the squirmer model, which we adapt to the FCM framework, resulting in a method that is suitable for simulating semi-dilute squirmer suspensions. Other effects, such as steric interactions, are considered with our model. We test… ▽ More We present a new development of the force-coupling method (FCM) to address the accurate simulation of a large number of interacting micro-swimmers. Our approach is based on the squirmer model, which we adapt to the FCM framework, resulting in a method that is suitable for simulating semi-dilute squirmer suspensions. Other effects, such as steric interactions, are considered with our model. We test our method by comparing the velocity field around a single squirmer and the pairwise interactions between two squirmers with exact solutions to the Stokes equations and results given by other numerical methods. We also illustrate our method's ability to describe spheroidal swimmer shapes and biologically-relevant time-dependent swimming gaits. We detail the numerical algorithm used to compute the hydrodynamic coupling between a large collection ($10^4-10 ^5$) of micro-swimmers. Using this methodology, we investigate the emergence of polar order in a suspension of squirmers and show that for large domains, both the steady-state polar order parameter and the growth rate of instability are independent of system size. These results demonstrate the effectiveness of our approach to achieve near continuum-level results, allowing for better comparison with experimental measurements while complementing and informing continuum models. △ Less

Submitted 17 December, 2015; v1 submitted 13 January, 2015; originally announced January 2015.

Comments: 37 pages, 21 figures

Fluctuating force-coupling method for simulations of colloidal suspensions

Authors: Eric E. Keaveny

Abstract: The resolution of Brownian motion in simulations of micro-particle suspensions can be crucial to reproducing the correct dynamics of individual particles, as well as providing an accurate characterisation of suspension properties. Including these effects in simulations, however, can be computationally intensive due to the configuration dependent random displacements that would need to be determine… ▽ More The resolution of Brownian motion in simulations of micro-particle suspensions can be crucial to reproducing the correct dynamics of individual particles, as well as providing an accurate characterisation of suspension properties. Including these effects in simulations, however, can be computationally intensive due to the configuration dependent random displacements that would need to be determined at every time step. In this paper, we introduce the fluctuating force-coupling method (FCM) to overcome this difficulty, providing a fast approach to simulate colloidal suspensions at large-scale. We show explicitly that by forcing the surrounding fluid with a fluctuating stress and employing the FCM framework to obtain the motion of the particles, one obtains the random particle velocities and angular velocities that satisfy the fluctuation-dissipation theorem. This result holds even when higher-order multipoles, such as stresslets, are included in the FCM approximation. Through several numerical experiments, we confirm our analytical results and demonstrate the effectiveness of fluctuating FCM, showing also how Brownian drift can be resolved by employing the appropriate time integration scheme and conjugate gradient method. △ Less

Submitted 19 February, 2014; v1 submitted 7 June, 2013; originally announced June 2013.

Locomotion of C. elegans in Structured Environments

Authors: Trushant S. Majmudar, Eric Keaveny, Mike Shelley, Jun Zhang

Abstract: Undulatory locomotion of microorganisms like soil-dwelling worms and spermatozoa, in structured environments, is ubiquitous in nature. They navigate complex environments consisting of fluids and obstacles, negotiating hydrodynamic effects and geometrical constraints. Here, we show fluid dynamics videos of experiments and simulations of {\textit {C. elegans}} moving in an array of micro-pillars. In… ▽ More Undulatory locomotion of microorganisms like soil-dwelling worms and spermatozoa, in structured environments, is ubiquitous in nature. They navigate complex environments consisting of fluids and obstacles, negotiating hydrodynamic effects and geometrical constraints. Here, we show fluid dynamics videos of experiments and simulations of {\textit {C. elegans}} moving in an array of micro-pillars. In addition, we show a video of transition from swimming to crawling in drop of {\textit {C. elegans}}, where the fluid is wicking into agar. △ Less

Submitted 18 October, 2010; originally announced October 2010.

Comments: Includes video movies for APS DFD Gallery of Fluid Motion