-
Gridded RF Gun Design for SRF Linac Applications
Authors:
I. Gonin,
C. Edwards,
S. Kazakov,
T. Khabiboulline,
T. Nicol,
A. Saini,
N. Solyak,
J. C. T. Thangaraj,
V. Yakovlev,
M. Curtis,
K. Gunther
Abstract:
The thermionic gridded gun is described which generates short electron bunches for further acceleration in a Nb3Sn conduction cooled SRF linac. The gun is built into the first cavity of the 250 keV injector [1] for the 20 kW, 10 MeV, 1.3 GHz CW conduction cooled one-cavity linac. The beam current is 2 mA. The RF gun design is presented as well as the results of perveance measurements, which are in…
▽ More
The thermionic gridded gun is described which generates short electron bunches for further acceleration in a Nb3Sn conduction cooled SRF linac. The gun is built into the first cavity of the 250 keV injector [1] for the 20 kW, 10 MeV, 1.3 GHz CW conduction cooled one-cavity linac. The beam current is 2 mA. The RF gun design is presented as well as the results of perveance measurements, which are in a good agreement with the design parameters. The design of the RF resonator of the gun is presented also. The beam generated by the gun is matched to the injector to provide lack of current interception in the SRF cavity.
△ Less
Submitted 11 September, 2024;
originally announced September 2024.
-
Performance of PIP-II High-beta 650 Cryomodule After Transatlantic Shipping
Authors:
J. Ozelis,
M. Barba,
J. Bernardini,
C. Contreras-Martinez,
D. Crawford,
J. Dong,
V. Grzelak,
P. Hanlet,
J. Holzbauer,
Y. Jia,
S. Kazakov,
T. Khabiboulline,
J. Makara,
N. Patel,
V. Patel,
L. Pei,
D. Peterson,
Y. Pischalnikov,
D. Porwisiak,
S. Ranpariya,
J. Steimel,
N. Solyak,
J. Subedi,
A. Sukhanov,
P. Varghese
, et al. (5 additional authors not shown)
Abstract:
After shipment to the Daresbury Lab and return to Fermilab, the prototype HB650 cryomodule underwent another phase of 2K RF testing to ascertain any performance issues that may have arisen from the transport of the cryomodule. While measurements taken at room temperature after the conclusion of shipment indicated that there were no negative impacts on cavity alignment, beamline vacuum, or cavity f…
▽ More
After shipment to the Daresbury Lab and return to Fermilab, the prototype HB650 cryomodule underwent another phase of 2K RF testing to ascertain any performance issues that may have arisen from the transport of the cryomodule. While measurements taken at room temperature after the conclusion of shipment indicated that there were no negative impacts on cavity alignment, beamline vacuum, or cavity frequency, testing at 2K was required to validate other aspects such as tuner operation, cavity coupling, cryogenic system integrity, and cavity performance. Results of this latest round of limited 2K testing will be presented.
△ Less
Submitted 3 September, 2024;
originally announced September 2024.
-
HELEN: Traveling Wave SRF Linear Collider Higgs Factory
Authors:
S. Belomestnykh,
P. C. Bhat,
A. Grassellino,
S. Kazakov,
H. Padamsee,
S. Posen,
A. Romanenko,
V. Shiltsev,
A. Valishev,
V. Yakovlev
Abstract:
Traveling wave SRF accelerating structures offer several advantages over the traditional standing wave structures: substantially lower $H_pk/E_acc$ and lower $E_pk/E_acc$, ratios of peak magnetic field and peak electric field to the accelerating gradient, respectively, together with substantially higher $R/Q$. In this paper we discuss how a linear collider Higgs Factory HELEN can be built using TW…
▽ More
Traveling wave SRF accelerating structures offer several advantages over the traditional standing wave structures: substantially lower $H_pk/E_acc$ and lower $E_pk/E_acc$, ratios of peak magnetic field and peak electric field to the accelerating gradient, respectively, together with substantially higher $R/Q$. In this paper we discuss how a linear collider Higgs Factory HELEN can be built using TW-based SRF linacs. We cover a plan to address technological challenges and describe ways to upgrade the collider luminosity and energy.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
Design, Manufacturing, Assembly, and Lessons Learned of the Pre-production 325 MHz Couplers for the PIP-II Project at Fermilab
Authors:
J. Helsper,
S. Wallon,
D. Passarelli,
D. Longuevergne,
S. Kazakov,
N. Solyak
Abstract:
Five 325 MHz high-power couplers will be integrated into the pre-production Single Spoke Resonator Type-II (ppSSR2) cryomodule for the PIP-II project at Fermilab. Couplers were procured by both Fermilab and IJCLAB for this effort. The design of the coupler is described, including design optimizations from the previous generation. This paper then describes the coupler life cycle, including design,…
▽ More
Five 325 MHz high-power couplers will be integrated into the pre-production Single Spoke Resonator Type-II (ppSSR2) cryomodule for the PIP-II project at Fermilab. Couplers were procured by both Fermilab and IJCLAB for this effort. The design of the coupler is described, including design optimizations from the previous generation. This paper then describes the coupler life cycle, including design, manufacturing, and assembly, along with the lessons learned at each stage.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Design, Manufacturing, Assembly, Testing, And Lessons Learned Of The Prototype 650 Mhz Couplers
Authors:
J. Helsper,
S. Chandrasekaran,
N. Solyak,
S. Kazakov,
K. Premo,
G. Wu,
F. Furuta,
J. Ozelis,
B. Hanna
Abstract:
Six 650 MHz high-power couplers will be integrated into the prototype High Beta 650 MHz (HB650) cryomodule for the PIP-II project at Fermilab. The design of the coupler is described, including design optimizations from the previous generation. This paper then describes the coupler life-cycle, including manufacturing, assembly, testing, conditioning, and the lessons learned at each stage.
Six 650 MHz high-power couplers will be integrated into the prototype High Beta 650 MHz (HB650) cryomodule for the PIP-II project at Fermilab. The design of the coupler is described, including design optimizations from the previous generation. This paper then describes the coupler life-cycle, including manufacturing, assembly, testing, conditioning, and the lessons learned at each stage.
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
Design of a medium energy, high average power superconducting e-beam accelerator for environmental applications
Authors:
R. C. Dhuley,
I. Gonin,
K. Zeller,
R. Kostin,
S. Kazakov,
B. Coriton,
T. Khabiboulline,
A. Sukhanov,
V. Yakovlev,
A. Saini,
N. Solyak,
A. Sauers,
J. C. T. Thangaraj
Abstract:
We present the technical and engineering design of a medium energy (10 MeV) and high average power (1 MW) electron beam accelerator intended for irradiation treatment of high volume industrial and municipal wastewater. The accelerator uses superconducting radiofrequency (SRF) cavity technology for producing the high average beam power with $>$90% RF to beam efficiency. The design of the accelerato…
▽ More
We present the technical and engineering design of a medium energy (10 MeV) and high average power (1 MW) electron beam accelerator intended for irradiation treatment of high volume industrial and municipal wastewater. The accelerator uses superconducting radiofrequency (SRF) cavity technology for producing the high average beam power with $>$90% RF to beam efficiency. The design of the accelerator is simplified and tailored for industrial settings by adopting the cryocooler conduction-cooling technique for the SRF cavity instead of a conventional liquid helium bath cryo-system. The technical design is supplemented with a detailed analysis of capital and operating cost of the accelerator. The designed accelerator can treat up to 12 million gallons per day of wastewater, requires capital of $\sim\$$8M for construction, and has $\sim$13.5 cents/ton/kGy in material processing cost.
△ Less
Submitted 26 December, 2021; v1 submitted 16 December, 2021;
originally announced December 2021.
-
Commissioning And First Results From The Fermilab Cryomodule Test Stand
Authors:
E. R. Harms,
M. Awida,
C. Baffes,
K. Carlson,
S. Chandrasekaran,
B. Chase,
E. Cullerton,
J. Edelen,
J. Einstein-Curtis,
C. Ginsburg,
A. Grassellino,
B. Hansen,
J. Holzbauer,
S. Kazakov,
T. Khabiboulline,
M. Kucera,
J. Leibfritz,
A. Lunin,
D. McDowell,
M. McGee,
D. Nicklaus,
D. Orris,
J. Ozelis,
J. Patrick,
T. Petersen
, et al. (12 additional authors not shown)
Abstract:
A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overv…
▽ More
A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overview of first test results, and survey future plans.
△ Less
Submitted 7 May, 2018;
originally announced May 2018.
-
Compact Low-Voltage, High-Power, Multi-beam Klystron for ILC: Initial Test Results
Authors:
V. E. Teryaev,
S. V. Shchelkunov,
S. Yu. Kazakov,
J. L. Hirshfield,
R. L. Ives,
D. Marsden,
G. Collins,
R. Karimov,
R. Jensen
Abstract:
Initial test results of an L-band multi-beam klystron with parameters relevant for ILC are presented. The chief distinction of this tube from MBKs already developed for ILC is its low operating voltage of 60 kV, a virtue that implies considerable technological simplifications in the accelerator complex. To demonstrate the concept underlying the tubes design, a six-beamlet quadrant (a 54 inch high…
▽ More
Initial test results of an L-band multi-beam klystron with parameters relevant for ILC are presented. The chief distinction of this tube from MBKs already developed for ILC is its low operating voltage of 60 kV, a virtue that implies considerable technological simplifications in the accelerator complex. To demonstrate the concept underlying the tubes design, a six-beamlet quadrant (a 54 inch high one-quarter portion of the full 1.3 GHz tube) was built and recently underwent initial tests, with main goals of demonstrating rated gun perveance, rated gain, and at least one-quarter of the full 10-MW rated power. Our initial three-day conditioning campaign without RF drive (140 microsec pulses @ 60 Hz) was stopped at 53% of full rated duty because of time-limits at the test-site; no signs appeared that would seem to prevent achieving full duty operation (i.e., 1.6 msec pulses @ 10 Hz). The subsequent tests with 10-15 microsec RF pulses confirmed the rated gain, produced output powers of up to 2.86 MW at 60 kV with high efficiency and 56 dB gain, and showed acceptable beam interception. These results suggest that a full version of the tube should be able to produce up to 11.5 MW. Follow-on tests are planned for later in 2015.
△ Less
Submitted 20 October, 2015;
originally announced October 2015.
-
Search for a Scalar Axion-like Particle at 34 GHz
Authors:
P. L. Slocum,
O. K. Baker,
J. L. Hirshfield,
Y. Jiang,
G. Kazakevitch,
S. Kazakov,
M. A. LaPointe,
A. T. Malagon,
A. J. Martin,
S. Shchelkunov,
A. Szymkowiak
Abstract:
Light axion-like particles (ALPs) that couple to two photons are allowed in a number of proposed extensions to the Standard Model of elementary particles. Of particular interest from a theoretical and observational standpoint is the energy regime near 0.1 meV. We present results from a pilot experiment to search for a signal from a 0.14 meV scalar ALP by way of its coupling to two photons. Using a…
▽ More
Light axion-like particles (ALPs) that couple to two photons are allowed in a number of proposed extensions to the Standard Model of elementary particles. Of particular interest from a theoretical and observational standpoint is the energy regime near 0.1 meV. We present results from a pilot experiment to search for a signal from a 0.14 meV scalar ALP by way of its coupling to two photons. Using a copper resonant cavity cooled to four degrees Kelvin while immersed in a seven Tesla magnetic field, and coupled to a low noise cryogenic amplifier and room temperature receiver, we exclude an ALP-driven excess of 34 GHz photons with g$>10^{-8}$/GeV with 5$σ$ confidence. We discuss the ramifications of this initial measurement as well as planned modifications to the experiment for increased sensitivity.
△ Less
Submitted 25 January, 2013;
originally announced January 2013.
-
Three-cell traveling wave superconducting test structure
Authors:
Pavel Avrakhov,
Alexei Kanareykin,
Sergey Kazakov,
Nikolay Solyak,
Genfa Wu,
Vyacheslav P. Yakovlev
Abstract:
Use of a superconducting traveling wave accelerating (STWA) structure with a small phase advance per cell rather than a standing wave structure may provide a significant increase of the accelerating gradient in the ILC linac. For the same surface electric and magnetic fields the STWA achieves an accelerating gradient 1.2 larger than TESLA-like standing wave cavities. The STWA allows also longer ac…
▽ More
Use of a superconducting traveling wave accelerating (STWA) structure with a small phase advance per cell rather than a standing wave structure may provide a significant increase of the accelerating gradient in the ILC linac. For the same surface electric and magnetic fields the STWA achieves an accelerating gradient 1.2 larger than TESLA-like standing wave cavities. The STWA allows also longer acceleration cavities, reducing the number of gaps between them. However, the STWA structure requires a SC feedback waveguide to return the few hundreds of MW of circulating RF power from the structure output to the structure input. A test single-cell cavity with feedback was designed, manufactured and successfully tested demonstrating the possibility of a proper processing to achieve a high accelerating gradient. These results open way to take the next step of the TW SC cavity development: to build and test a traveling-wave three-cell cavity with a feedback waveguide. The latest results of the single-cell cavity tests are discussed as well as the design of the test 3-cell TW cavity.
△ Less
Submitted 7 March, 2012;
originally announced March 2012.
-
Compensation of the Crossing Angle with Crab Cavities at KEKB
Authors:
T. Abe,
K. Akai,
M. Akemoto,
A. Akiyama,
M. Arinaga,
K. Ebihara,
K. Egawa,
A. Enomoto,
J. Flanagan,
S. Fukuda,
H. Fukuma,
Y. Funakoshi,
K. Furukawa,
T. Furuya,
K. Hara,
T. Higo,
S. Hiramatsu,
H. Hisamatsu,
H. Honma,
T. Honma,
K. Hosoyama,
T. Ieiri,
N. Iida,
H. Ikeda,
M. Ikeda
, et al. (90 additional authors not shown)
Abstract:
Crab cavities have been installed in the KEKB B--Factory rings to compensate the crossing angle at the collision point and thus increase luminosity. The beam operation with crab crossing has been done since February 2007. This is the first experience with such cavities in colliders or storage rings. The crab cavities have been working without serious issues. While higher specific luminosity than…
▽ More
Crab cavities have been installed in the KEKB B--Factory rings to compensate the crossing angle at the collision point and thus increase luminosity. The beam operation with crab crossing has been done since February 2007. This is the first experience with such cavities in colliders or storage rings. The crab cavities have been working without serious issues. While higher specific luminosity than the geometrical gain has been achieved, further study is necessary and under way to reach the prediction of simulation.
△ Less
Submitted 21 June, 2007;
originally announced June 2007.
