Showing 1–50 of 68 results for author: Kato, Y

Dielectric environment engineering via 2D material heterostructure formation on hybrid photonic crystal nanocavity

Authors: C. F. Fong, D. Yamashita, N. Fang, Y. -R. Chang, S. Fujii, T. Taniguchi, K. Watanabe, Y. K. Kato

Abstract: Hybrid integration of two-dimensional (2D) materials with nanophotonic platforms has enabled compact optoelectronic devices by leveraging the unique optical and electronic properties of atomically thin layers. While most efforts have focused on coupling 2D materials to pre-defined photonic structures, the broader potential of 2D heterostructures for actively engineering the photonic environment re… ▽ More Hybrid integration of two-dimensional (2D) materials with nanophotonic platforms has enabled compact optoelectronic devices by leveraging the unique optical and electronic properties of atomically thin layers. While most efforts have focused on coupling 2D materials to pre-defined photonic structures, the broader potential of 2D heterostructures for actively engineering the photonic environment remains largely unexplored. In our previous work, we employed single types of 2D material and showed that even monolayer flakes can locally induce high-$Q$ nanocavities in photonic crystal (PhC) waveguides through effective refractive index modulation. Here, we extend this concept by demonstrating that further transferring of 2D material flakes onto the induced hybrid nanocavity to form heterostructures enable more flexibility for post-fabrication dielectric environment engineering of the cavity. We show that the high-$Q$ hybrid nanocavities remain robust under sequential flake stacking. Coupling optically active MoTe$_{2}$ flake to these cavities yields enhanced photoluminescence and reduced emission lifetimes, consistent with Purcell-enhanced light-matter interactions. Additionally, encapsulation with a top hBN layer leads to a significant increase in the cavity $Q$ factor, in agreement with numerical simulations. Our results show that these heterostructure stacks not only preserve the cavity quality but also introduce an additional degrees of control -- via flake thickness, refractive indices, size and interface design -- offering a richer dielectric environment modulation landscape than what is achievable with monolayers alone, providing a versatile method toward scalable and reconfigurable hybrid nanophotonic systems. △ Less

Submitted 3 September, 2025; v1 submitted 26 July, 2025; originally announced July 2025.

Comments: 19 pages (including references), 3 figures

Synchronization of Dirac-Bianconi driven oscillators

Authors: Riccardo Muolo, Iván León, Yuzuru Kato, Hiroya Nakao

Abstract: In dynamical systems on networks, one assigns the dynamics to nodes, which are then coupled via links. This approach does not account for group interactions and dynamics on links and other higher dimensional structures. Higher-order network theory addresses this by considering variables defined on nodes, links, triangles, and higher-order simplices, called topological signals (or cochains). Moreov… ▽ More In dynamical systems on networks, one assigns the dynamics to nodes, which are then coupled via links. This approach does not account for group interactions and dynamics on links and other higher dimensional structures. Higher-order network theory addresses this by considering variables defined on nodes, links, triangles, and higher-order simplices, called topological signals (or cochains). Moreover, topological signals of different dimensions can interact through the Dirac-Bianconi operator, which allows coupling between topological signals defined, for example, on nodes and links. Such interactions can induce various dynamical behaviors, for example, periodic oscillations. The oscillating system consists of topological signals on nodes and links whose dynamics are driven by the Dirac-Bianconi coupling, hence, which we call it Dirac-Bianconi driven oscillator. Using the phase reduction method, we obtain a phase description of this system and apply it to the study of synchronization between two such oscillators. This approach offers a way to analyze oscillatory behaviors in higher-order networks beyond the node-based paradigm, while providing a ductile modeling tool for node- and edge-signals. △ Less

Submitted 25 June, 2025; originally announced June 2025.

The ILD Detector: A Versatile Detector for an Electron-Positron Collider at Energies up to 1 TeV

Authors: H. Abramowicz, D. Ahmadi, J. Alcaraz, O. Alonso, L. Andricek, J. Anguiano, O. Arquero, F. Arteche, D. Attie, O. Bach, M. Basso, J. Baudot, A. Bean, T. Behnke, A. Bellerive, Y. Benhammou, M. Berggren, G. Bertolone, M. Besancon, A. Besson, O. Bezshyyko, G. Blazey, B. Bliewert, J. Bonis, R. Bosley , et al. (254 additional authors not shown)

Abstract: The International Large Detector, ILD, is a detector concept for an experiment at a future high energy lepton collider. The detector has been optimised for precision physics in a range of energies from 90~GeV to about 1~TeV. ILD features a high precision, large volume combined silicon and gaseous tracking system, together with a high granularity calorimeter, all inside a central solenoidal magneti… ▽ More The International Large Detector, ILD, is a detector concept for an experiment at a future high energy lepton collider. The detector has been optimised for precision physics in a range of energies from 90~GeV to about 1~TeV. ILD features a high precision, large volume combined silicon and gaseous tracking system, together with a high granularity calorimeter, all inside a central solenoidal magnetic field. The paradigm of particle flow has been the guiding principle of the design of ILD. ILD is based mostly on technologies which have been demonstrated by extensive research and test programs. The ILD concept is proposed both for linear and circular lepton collider, be it at CERN or elsewhere. The concept has been developed by a group of nearly 60 institutes from around the world, and offers a well developed and powerful environment for science and technology studies at lepton colliders. In this document, the required performance of the detector, the proposed implementation and the readiness of the different technologies needed for the implementation are discussed. △ Less

Submitted 6 June, 2025; originally announced June 2025.

Comments: Submitted to the EPSSU2024

The Imaging Time-of-Propagation Detector at Belle II

Authors: Hulya Atmacan, Matt Belhorn, Yinghui Guan, Longke Li, Bilas Pal, Saurabh Sandilya, Alan Schwartz, Boqun Wang, Shun Watanuki, Matthew Andrew, Matthew Barrett, Martin Bessner, Thomas Browder, J. Bynes, J. Cercillieux, Shawn Dubey, Oskar Hartbrich, Chris Ketter, Brian Kirby, Shahab Kohani, D. Kotchetkov, Luca Macchiarulo, B. Macek, Kurtis Nishimura, H. Purwar , et al. (70 additional authors not shown)

Abstract: We report on the construction, operation, and performance of the Time-of-Propagation detector with imaging used for the Belle II experiment running at the Super-KEKB $e^+e^-$ collider. This detector is located in the central barrel region and uses Cherenkov light to provide particle identification among hadrons. The Cherenkov light is radiated in highly polished bars of synthetic fused silica (qua… ▽ More We report on the construction, operation, and performance of the Time-of-Propagation detector with imaging used for the Belle II experiment running at the Super-KEKB $e^+e^-$ collider. This detector is located in the central barrel region and uses Cherenkov light to provide particle identification among hadrons. The Cherenkov light is radiated in highly polished bars of synthetic fused silica (quartz) and transported to the ends of the bars via total internal reflection. One bar end is instrumented with finely segmented micro-channel-plate photomultiplier tubes to record the light, while the other end has a mirror attached to reflect the photons back to the instrumented end. Both the propagation times and hit positions of the Cherenkov photons are measured; these depend on the Cherenkov angle and together provide good discrimination among charged pions, kaons, and protons with momenta up to around 4 GeV/$c$. To date, the detector has been used to record and analyze almost 600 fb$^{-1}$ of Belle II data. △ Less

Submitted 27 September, 2025; v1 submitted 26 April, 2025; originally announced April 2025.

Comments: 46 pages, 48 figures, 4 tables. Version 2: as published in Nuclear Instruments and Methods in Physics Research A

Report number: University of Cincinnati preprint UCHEP-25-01

Journal ref: Nuclear Instruments and Methods in Physics Research A 1080 (2025) 170627

Uncovering influence of football players' behaviour on team performance in ball possession through dynamical modelling

Authors: Hidemasa Ishii, Yohei Takai, Yuichiro Marui, Yoshihiro Yamazaki, Yusuke Kato, Hiroshi Kori

Abstract: A quest for uncovering influence of behaviour on team performance involves understanding individual behaviour, interactions with others and environment, variations across groups, and effects of interventions. Although insights into each of these areas have accumulated in sports science literature on football, it remains unclear how one can enhance team performance. We analyse influence of football… ▽ More A quest for uncovering influence of behaviour on team performance involves understanding individual behaviour, interactions with others and environment, variations across groups, and effects of interventions. Although insights into each of these areas have accumulated in sports science literature on football, it remains unclear how one can enhance team performance. We analyse influence of football players' behaviour on team performance in three-versus-one ball possession game by constructing and analysing a dynamical model. We developed a model for the motion of the players and the ball, which mathematically represented our hypotheses on players' behaviour and interactions. The model's plausibility was examined by comparing simulated outcomes with our experimental result. Possible influences of interventions were analysed through sensitivity analysis, where causal effects of several aspects of behaviour such as pass speed and accuracy were found. Our research highlights the potential of dynamical modelling for uncovering influence of behaviour on team effectiveness. △ Less

Submitted 9 April, 2025; originally announced April 2025.

Comments: 18 pages, 6 figures, 2 tables in main article / 8 pages, 3 figures, 2 tables in SI

The Linear Collider Facility (LCF) at CERN

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S. Ampudia Castelazo, D. Angal-Kalinin, J. A. Anguiano, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, D. Attié, J. L. Avila-Jimenez, H. Baer, Y. Bai, C. Balazs, P. Bambade, T. Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive, S. Belomestnykh, Y. Benhammou , et al. (386 additional authors not shown)

Abstract: In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive pr… ▽ More In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC. △ Less

Submitted 19 June, 2025; v1 submitted 31 March, 2025; originally announced March 2025.

Comments: Submission to the ESPPU, as updated version May 26

Report number: DESY-25-054

A Linear Collider Vision for the Future of Particle Physics

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S Ampudia Castelazo, D. Angal-Kalinin, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, A. Aryshev, S. Asai, D. Attié, J. L. Avila-Jimenez, H. Baer, J. A. Bagger, Y. Bai, I. R. Bailey, C. Balazs, T Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive , et al. (391 additional authors not shown)

Abstract: In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much… ▽ More In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we will discuss detectors and alternative collider modes, as well as opportunities for beyond-collider experiments and R\&D facilities as part of a linear collider facility (LCF). The material of this paper will support all plans for $e^+e^-$ linear colliders and additional opportunities they offer, independently of technology choice or proposed site, as well as R\&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC. △ Less

Submitted 29 September, 2025; v1 submitted 25 March, 2025; originally announced March 2025.

Comments: Community document for EPPSU, will be updated several times

Bayesian estimation of coupling strength and heterogeneity in a coupled oscillator model from macroscopic quantities

Authors: Yusuke Kato, Shuhei Kashiwamura, Emiri Watanabe, Masato Okada, Hiroshi Kori

Abstract: Various macroscopic oscillations, such as the heartbeat and the flashing of fireflies, are created by synchronizing oscillatory units (oscillators). To elucidate the mechanism of synchronization, several coupled oscillator models have been devised and extensively analyzed. Although parameter estimation of these models has also been actively investigated, most of the proposed methods are based on t… ▽ More Various macroscopic oscillations, such as the heartbeat and the flashing of fireflies, are created by synchronizing oscillatory units (oscillators). To elucidate the mechanism of synchronization, several coupled oscillator models have been devised and extensively analyzed. Although parameter estimation of these models has also been actively investigated, most of the proposed methods are based on the data from individual oscillators, not from macroscopic quantities. In the present study, we propose a Bayesian framework to estimate the model parameters of coupled oscillator models, using the time series data of the Kuramoto order parameter as the only given data. We adopt the exchange Monte Carlo method for the efficient estimation of the posterior distribution and marginal likelihood. Numerical experiments are performed to confirm the validity of our method and examine the dependence of the estimation error on the observational noise and system size. △ Less

Submitted 30 June, 2025; v1 submitted 14 January, 2025; originally announced January 2025.

Comments: 18 pages, 8 figures, 1 link to our GitHub repository

Demonstration of The Brightest Nano-size Gamma Source

Authors: A. S. Pirozhkov, A. Sagisaka, K. Ogura, E. A. Vishnyakov, A. N. Shatokhin, C. D. Armstrong, T. Zh. Esirkepov, B. Gonzalez Izquierdo, T. A. Pikuz, P. Hadjisolomou, M. A. Alkhimova, C. Arran, I. P. Tsygvintsev, P. Valenta, S. A. Pikuz, W. Yan, T. M. Jeong, S. Singh, O. Finke, G. Grittani, M. Nevrkla, C. Lazzarini, A. Velyhan, T. Hayakawa, Y. Fukuda , et al. (24 additional authors not shown)

Abstract: Gamma rays selectively interact with nuclei, induce and mediate nuclear reactions and elementary particle interactions, and exceed x-rays in penetrating power and thus are indispensable for analysis and modification of dense objects. Yet, the available gamma sources lack sufficient power and brightness. The predicted and highly desirable laser-driven gamma flash, from here on termed "Gamma Flash",… ▽ More Gamma rays selectively interact with nuclei, induce and mediate nuclear reactions and elementary particle interactions, and exceed x-rays in penetrating power and thus are indispensable for analysis and modification of dense objects. Yet, the available gamma sources lack sufficient power and brightness. The predicted and highly desirable laser-driven gamma flash, from here on termed "Gamma Flash", based on inverse Compton scattering from solid targets at extreme irradiances (>$10^{23}W/cm^2$), would be the highest-power and the brightest terrestrial gamma source with a 30-40% laser-to-gamma energy conversion. However, Gamma Flash remains inaccessible experimentally due to the Bremsstrahlung background. Here we experimentally demonstrate a new interaction regime at the highest effective irradiance where Gamma Flash scaled quickly with the laser power and produced several times the number of Bremsstrahlung photons. Simulations revealed an attosecond, Terawatt Gamma Flash with a nanometre source size achieving a record brightness exceeding $~10^{23}photons/mm^2mrad^2s$ per 0.1% bandwidth at tens of MeV photon energies, surpassing astrophysical Gamma Ray Bursts. These findings could revolutionize inertial fusion energy by enabling unprecedented sub-micrometre/femtosecond resolution radiography of fuel mixing instabilities in extremely-compressed targets. The new gamma source could facilitate significant advances in time-resolved nuclear physics, homeland security, nuclear waste management and non-proliferation, while opening possibilities for spatially-coherent gamma rays. △ Less

Submitted 23 December, 2024; v1 submitted 9 October, 2024; originally announced October 2024.

Comments: 39 pages, 12 figures

Measurement of Temperature Relaxation in the Postshock Plasma of the Northwestern Limb of SN 1006

Authors: Masahiro Ichihashi, Aya Bamba, Yuichi Kato, Satoru Katsuda, Hiromasa Suzuki, Tomoaki Kasuga, Hirokazu Odaka, Kazuhiro Nakazawa

Abstract: Heating of charged particles via collisionless shocks, while ubiquitous in the universe, is an intriguing yet puzzling plasma phenomenon. One outstanding question is how electrons and ions approach an equilibrium after they were heated to different immediate-postshock temperatures. In order to fill the significant lack of observational information of the downstream temperature-relaxation process,… ▽ More Heating of charged particles via collisionless shocks, while ubiquitous in the universe, is an intriguing yet puzzling plasma phenomenon. One outstanding question is how electrons and ions approach an equilibrium after they were heated to different immediate-postshock temperatures. In order to fill the significant lack of observational information of the downstream temperature-relaxation process, we observe a thermal-dominant X-ray filament in the northwest of SN~1006 with Chandra. We divide this region into four layers with a thickness of 15$^{\prime\prime}$ or 0.16 pc each, and fit each spectrum by a non-equilibrium ionization collisional plasma model. The electron temperature was found to increase toward downstream from 0.52-0.62 keV to 0.82-0.95 keV on a length scale of 60 arcsec (or 0.64 pc). This electron temperature is lower than thermal relaxation processes via Coulomb scattering, requiring some other effects such as plasma mixture due to turbulence and/or projection effects, etc, which we hope will be resolved with future X-ray calorimeter missions such as XRISM and Athena. △ Less

Submitted 14 May, 2024; originally announced May 2024.

Comments: 13 pages, 10 figures, PASJ, in press

Hybrid silicon all-optical switching devices integrated with two-dimensional material

Authors: Daiki Yamashita, Nan Fang, Shun Fujii, Yuichiro K. Kato

Abstract: We propose and demonstrate hybrid all-optical switching devices that combine silicon nanocavities and two-dimensional semiconductor material. By exploiting the refractive index modulation caused by photo-induced carriers in the two-dimensional material instead of the silicon substrate, we overcome the switching performance limitation imposed by the substrate material. Air-mode photonic crystal nan… ▽ More We propose and demonstrate hybrid all-optical switching devices that combine silicon nanocavities and two-dimensional semiconductor material. By exploiting the refractive index modulation caused by photo-induced carriers in the two-dimensional material instead of the silicon substrate, we overcome the switching performance limitation imposed by the substrate material. Air-mode photonic crystal nanobeam cavities capable of efficient interaction with two-dimensional materials are fabricated, and molybdenum ditelluride, a two-dimensional material with rapid carrier recombination, is transferred onto the cavities. The molybdenum ditelluride flake is excited by an optical pump pulse to shift the resonant wavelength of the cavity for switching operation. We have successfully achieved all-optical switching operations on the time scale of tens of picoseconds while requiring low switching energies of a few hundred femtojoules. △ Less

Submitted 26 March, 2024; originally announced March 2024.

Comments: 7 pages, 5 figures

Journal ref: Adv. Opt. Mater. 13, 2402531 (2024)

Anisotropy-induced spin parity effects

Authors: Shuntaro Sumita, Akihiro Tanaka, Yusuke Kato

Abstract: Spin parity effects refer to those special situations where a dichotomy in the physical behavior of a system arises, solely depending on whether the relevant spin quantum number is integral or half-odd integral. As is the case with the Haldane conjecture in antiferromagnetic spin chains, their pursuit often derives deep insights and invokes new developments in quantum condensed matter physics. Her… ▽ More Spin parity effects refer to those special situations where a dichotomy in the physical behavior of a system arises, solely depending on whether the relevant spin quantum number is integral or half-odd integral. As is the case with the Haldane conjecture in antiferromagnetic spin chains, their pursuit often derives deep insights and invokes new developments in quantum condensed matter physics. Here, we put forth a simple and general scheme for generating such effects in any spatial dimension through the use of anisotropic interactions, and a setup within reasonable reach of state-of-the-art cold-atom implementations. We demonstrate its utility through a detailed analysis of the magnetization behavior of a specific one-dimensional spin chain model, an anisotropic antiferromagnet in a transverse magnetic field, unraveling along the way the quantum origin of finite-size effects observed in the magnetization curve that had previously been noted but not clearly understood. △ Less

Submitted 7 September, 2024; v1 submitted 29 February, 2024; originally announced February 2024.

Comments: 26 pages (Main text: 6 pages; Supplemental Materials: 20 pages), 12 figures (Main text: 4 figures; Supplemental Materials: 8 figures); published version

Journal ref: Phys. Rev. B 110, L100403 (2024)

Van der Waals functionalization of ultrahigh-Q silica microcavities for $χ^{(2)}$-$χ^{(3)}$ hybrid nonlinear photonics

Authors: Shun Fujii, Nan Fang, Daiki Yamashita, Daichi Kozawa, Chee Fai Fong, Yuichiro K. Kato

Abstract: Optical nonlinear processes are indispensable in a wide range of applications including ultrafast laser sources, microscopy, metrology, and quantum information technologies. Combinations of the diverse nonlinear processes should further lead to the development of unique functionalities, but simultaneous use of second- and third-order nonlinear processes is generally difficult. Second-order effects… ▽ More Optical nonlinear processes are indispensable in a wide range of applications including ultrafast laser sources, microscopy, metrology, and quantum information technologies. Combinations of the diverse nonlinear processes should further lead to the development of unique functionalities, but simultaneous use of second- and third-order nonlinear processes is generally difficult. Second-order effects usually overwhelm the higher-order ones, except in centrosymmetric systems where the second-order susceptibility vanishes to allow the use of the third-order nonlinearity. Here we demonstrate a hybrid photonic platform whereby the balance between second- and third-order susceptibilities can be tuned flexibly. Ultrahigh-Q silica microcavities capable of generating third-order effects are functionalized by atomically thin tungsten diselenide, and we observe cavity-enhanced second-harmonic generation and sum-frequency generation with continuous-wave excitation at a power level of only a few hundred microwatts. Pump power dependence exhibits drastic increase and saturation of the second-harmonic light, originating from the dynamic phase-matching process. We show that the coexistence of second- and third-order nonlinearities in a single device can be achieved by carefully choosing the size and the location of the two-dimensional material. Our approach can be generalized to other types of cavities, unlocking the potential of hybrid systems with controlled nonlinear susceptibilities for novel applications. △ Less

Submitted 23 November, 2023; originally announced November 2023.

Comments: 21 pages, 5 figures

Journal ref: Nano Lett. 24, 14, 4209-4216 (2024)

Self-aligned hybrid nanocavities using atomically thin materials

Authors: C. F. Fong, D. Yamashita, N. Fang, S. Fujii, Y. -R. Chang, T. Taniguchi, K. Watanabe, Y. K. Kato

Abstract: Two-dimensional (2D) van der Waals layered materials with intriguing properties are increasingly being adopted in hybrid photonics. The 2D materials are often integrated with photonic structures including cavities to enhance light-matter coupling, providing additional control and functionality. The 2D materials, however, needs to be precisely placed on the photonic cavities. Furthermore, the trans… ▽ More Two-dimensional (2D) van der Waals layered materials with intriguing properties are increasingly being adopted in hybrid photonics. The 2D materials are often integrated with photonic structures including cavities to enhance light-matter coupling, providing additional control and functionality. The 2D materials, however, needs to be precisely placed on the photonic cavities. Furthermore, the transfer of 2D materials onto the cavities could degrade the cavity quality $(Q)$ factor. Instead of using prefabricated PhC nanocavities, we demonstrate a novel approach to form a hybrid nanocavity by partially covering a PhC waveguide post-fabrication with a suitably-sized 2D material flake. We successfully fabricated such hybrid nanocavity devices with hBN, WSe$_2$ and MoTe$_2$ flakes on silicon PhC waveguides, obtaining $Q$ factors as high as $4.0\times10^5$. Remarkably, even mono- and few-layer flakes can provide sufficient local refractive index modulation to induce nanocavity formation. Since the 2D material is spatially self-aligned to the nanocavity, we have also managed to observe cavity PL enhancement in a MoTe$_2$ hybrid cavity device, with a cavity Purcell enhancement factor of about 15. Our results highlights the prospect of using such 2D materials-induced PhC nanocavity to realize a wide range of photonic components for hybrid devices and integrated photonic circuits. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Comments: 9 pages, 4 figures

Journal ref: ACS Photonics 11, 2247 (2024)

Proposal for simulating quantum spin models with the Dzyaloshinskii-Moriya interaction using Rydberg atoms and the construction of asymptotic quantum many-body scar states

Authors: Masaya Kunimi, Takafumi Tomita, Hosho Katsura, Yusuke Kato

Abstract: We have developed a method to simulate quantum spin models with the Dzyaloshinskii-Moriya interaction (DMI) using Rydberg atom quantum simulators. Our approach involves a two-photon Raman transition and a transformation to the spin-rotating frame, both of which are feasible with current experimental techniques. As a model that can be simulated in our setup but not in solid-state systems, we consid… ▽ More We have developed a method to simulate quantum spin models with the Dzyaloshinskii-Moriya interaction (DMI) using Rydberg atom quantum simulators. Our approach involves a two-photon Raman transition and a transformation to the spin-rotating frame, both of which are feasible with current experimental techniques. As a model that can be simulated in our setup but not in solid-state systems, we consider an $S=\frac{1}{2}$ spin chain with a Hamiltonian consisting of the DMI and Zeeman energy. We study the magnetization curve in the ground state of this model and quench dynamics. Further, we show the existence of quantum many-body scar states and asymptotic quantum many-body scar states. The observed nonergodicity in this model demonstrates the importance of the highly tunable DMI that can be realized by the proposed quantum simulator. △ Less

Submitted 28 November, 2024; v1 submitted 8 June, 2023; originally announced June 2023.

Comments: 21 pages and 15 figures (main) and 12 pages, 2 figures, and 1 table (supple)

Journal ref: Phys. Rev. A 110, 043312 (2024)

Neutron Tagging following Atmospheric Neutrino Events in a Water Cherenkov Detector

Authors: K. Abe, Y. Haga, Y. Hayato, K. Hiraide, K. Ieki, M. Ikeda, S. Imaizumi, K. Iyogi, J. Kameda, Y. Kanemura, Y. Kataoka, Y. Kato, Y. Kishimoto, S. Miki, S. Mine, M. Miura, T. Mochizuki, S. Moriyama, Y. Nagao, M. Nakahata, T. Nakajima, Y. Nakano, S. Nakayama, T. Okada, K. Okamoto , et al. (281 additional authors not shown)

Abstract: We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agr… ▽ More We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agrees with this value within 10%. The tagging procedure was performed on 3,244.4 days of SK-IV atmospheric neutrino data, identifying 18,091 neutrons in 26,473 neutrino events. The fitted neutron capture lifetime was measured as 218 \pm 9 μs. △ Less

Submitted 20 September, 2022; v1 submitted 18 September, 2022; originally announced September 2022.

Journal ref: JINST 17 P10029 (2022)

A novel technique for the measurement of the avalanche fluctuations of a GEM stack using a gating foil

Authors: M. Kobayashi, K. Yumino, T. Ogawa, A. Shoji, Y. Aoki, K. Ikematsu, P. Gros, T. Kawaguchi, D. Arai, M. Iwamura, K. Katsuki, A. Koto, M. Yoshikai, K. Fujii, T. Fusayasu, Y. Kato, S. Kawada, T. Matsuda, T. Mizuno, J. Nakajima, S. Narita, K. Negishi, H. Qi, R. D. Settles, A. Sugiyama , et al. (4 additional authors not shown)

Abstract: We have developed a novel technique for the measurement of the size of avalanche fluctuations of gaseous detectors using a gating device (gating foil) prepared for the time projection chamber in the international linear collider experiment (ILD-TPC). In addition to the gating function, the gating foil is capable of controlling the average fraction of drift electrons detected after gas amplificatio… ▽ More We have developed a novel technique for the measurement of the size of avalanche fluctuations of gaseous detectors using a gating device (gating foil) prepared for the time projection chamber in the international linear collider experiment (ILD-TPC). In addition to the gating function, the gating foil is capable of controlling the average fraction of drift electrons detected after gas amplification. The signal charge width and shape (skewness) for electron-ion pairs created by a pulsed UV laser as a function of the transmission rate of the gating foil can be used to determine the relative variance of gas gain for single electrons. We present the measurement principle and the result obtained using a stack of gas electron multipliers (GEMs) operated in a gas mixture of Ar-CF$_4$(3%)-isobutane(2%) at atmospheric pressure. Also discussed is the influence of the avalanche fluctuations on the spatial resolution of the ILD-TPC. △ Less

Submitted 2 July, 2022; originally announced July 2022.

Comments: 39 pages including 11 figures

Journal ref: Nuclear Instruments and Methods in Physics Research A 1039 (2022) 166872

Versatile tuning of Kerr soliton microcombs in crystalline microresonators

Authors: Shun Fujii, Koshiro Wada, Ryo Sugano, Hajime Kumazaki, Soma Kogure, Yuichiro K. Kato, Takasumi Tanabe

Abstract: Microresonator-based optical frequency combs emitted from high-quality-factor microresonators, also known as microcombs, have opened up new horizons to areas of optical frequency comb technology including frequency metrology, precision sensing, and optical communication. To extend the capability of microcombs for such applications, large and reliable tunability is of critical importance. Here, we… ▽ More Microresonator-based optical frequency combs emitted from high-quality-factor microresonators, also known as microcombs, have opened up new horizons to areas of optical frequency comb technology including frequency metrology, precision sensing, and optical communication. To extend the capability of microcombs for such applications, large and reliable tunability is of critical importance. Here, we show broad spectral tuning of Kerr soliton microcombs in a thermally controlled crystalline microresonator with pump-detuning stabilization. The fundamental elements composing frequency combs, namely the center frequency, repetition frequency, and carrier-envelope offset frequency, are spectrally tuned by up to -48.8 GHz, -5.85 MHz, and -386 MHz, respectively, leveraging thermal effects in ultrahigh-Q crystalline magnesium fluoride resonators. We further demonstrate a 3.4-fold enhancement of soliton comb power resulting from thermal expansion with a temperature change of only 28 K by employing quantitative analyses of the fiber-to-resonator coupling efficiency. △ Less

Submitted 2 March, 2023; v1 submitted 28 June, 2022; originally announced June 2022.

Comments: 10 pages, 4 figures

Journal ref: Communications Physics, 6, 1 (2023)

Double-hit separation and dE/dx resolution of a time projection chamber with GEM readout

Authors: Yumi Aoki, David Attié, Ties Behnke, Alain Bellerive, Oleg Bezshyyko, Deb Bhattacharya Sankar, Purba Bhattacharya, Sudeb Bhattacharya, Yue Chang, Paul Colas, Gilles De Lentdecker, Klaus Dehmelt, Klaus Desch, Ralf Diener, Madhu Dixit, Ulrich Einhaus, Oleksiy Fedorchuk, Ivor Fleck, Keisuke Fujii, Takahiro Fusayasu, Serguei Ganjour, Philippe Gros, Peter Hayman, Katsumasa Ikematsu, Leif Jönsson , et al. (46 additional authors not shown)

Abstract: A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field… ▽ More A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field at the DESY II Test Beam Facility, which provides an electron beam up to 6 GeV/c. The performance of the readout modules, in particular the spatial point resolution, is determined and compared to earlier tests. New studies are presented with first results on the separation of close-by tracks and the capability of the system to measure the specific energy loss dE/dx. This is complemented by a simulation study on the optimization of the readout granularity to improve particle identification by dE/dx. △ Less

Submitted 25 November, 2022; v1 submitted 24 May, 2022; originally announced May 2022.

Comments: 29 pages, 30 figures, 6 tables. This is the Accepted Manuscript version of an article accepted for publication in Journal of Instrumentation. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/1748-0221/17/11/P11027

Report number: PUBDB-2022-02594

Journal ref: Journal of Instrumentation, Volume 17, Number 11, P11027 -, November 2022

The International Linear Collider: Report to Snowmass 2021

Authors: Alexander Aryshev, Ties Behnke, Mikael Berggren, James Brau, Nathaniel Craig, Ayres Freitas, Frank Gaede, Spencer Gessner, Stefania Gori, Christophe Grojean, Sven Heinemeyer, Daniel Jeans, Katja Kruger, Benno List, Jenny List, Zhen Liu, Shinichiro Michizono, David W. Miller, Ian Moult, Hitoshi Murayama, Tatsuya Nakada, Emilio Nanni, Mihoko Nojiri, Hasan Padamsee, Maxim Perelstein , et al. (487 additional authors not shown)

Abstract: The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu… ▽ More The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community. △ Less

Submitted 16 January, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 356 pages, Large pdf file (40 MB) submitted to Snowmass 2021; v2 references to Snowmass contributions added, additional authors; v3 references added, some updates, additional authors

Report number: DESY-22-045, IFT--UAM/CSIC--22-028, KEK Preprint 2021-61, PNNL-SA-160884, SLAC-PUB-17662

Wakefield Acceleration in a Jet from a Neutrino Driven Accretion Flow around a Black Hole

Authors: Yoshiaki Kato, Toshikazu Ebisuzaki, Toshiki Tajima

Abstract: We have investigated electro-magnetic (EM) wave pulses in a jet from a neutrino driven accretion flow (NDAF) around a black hole (BH). NDAFs are massive accretion disks whose accretion rates of $\dot{M}\approx 0.01 - 10 \mathrm{M}_\odot/\mathrm{s}$ for stellar-mass BHs. Such an extreme accretion may produce a collimated relativistic outflow like a magnetically driven jet in active galactic nuclei… ▽ More We have investigated electro-magnetic (EM) wave pulses in a jet from a neutrino driven accretion flow (NDAF) around a black hole (BH). NDAFs are massive accretion disks whose accretion rates of $\dot{M}\approx 0.01 - 10 \mathrm{M}_\odot/\mathrm{s}$ for stellar-mass BHs. Such an extreme accretion may produce a collimated relativistic outflow like a magnetically driven jet in active galactic nuclei and micro-quasars. When we consider strong toroidal magnetic field stranded in the inner-region of a NDAF disk and magnetic impulses on the jet, we find that they lead to the emanation of high energy emissions for gamma-ray bursts as well as high energy cosmic rays. When Alfvénic wave pulses are generated by episodic immense accretions, it propagates along the large-scale structured magnetic field in the jet. Once the Alfvénic wave pulses reach at nearly the speed of light in the underdense condition, it turns into EM wave pulses which produce plasma wakes behind them. These wakefields exert a collective accelerating force synchronous to the motion of particles. As a result, the wakefield acceleration premises various observational signatures, such as pulsating bursts of high energy gamma-rays from accelerated electrons, pulses of neutrinos from accelerated protons, and protons with maximum energies beyond $10^{20}~\mathrm{eV}$. △ Less

Submitted 20 February, 2022; v1 submitted 27 January, 2022; originally announced January 2022.

Comments: 26 pages, 6 figures, accepted to ApJ

Quantization of mode shifts in nanocavities integrated with atomically thin sheets

Authors: N. Fang, D. Yamashita, S. Fujii, K. Otsuka, T. Taniguchi, K. Watanabe, K. Nagashio, Y. K. Kato

Abstract: The unique optical properties of two-dimensional layered materials are attractive for achieving increased functionality in integrated photonics. Owing to the van der Waals nature, these materials are ideal for integrating with nanoscale photonic structures. Here we report on carefully designed air-mode silicon photonic crystal nanobeam cavities for efficient control through two-dimensional materia… ▽ More The unique optical properties of two-dimensional layered materials are attractive for achieving increased functionality in integrated photonics. Owing to the van der Waals nature, these materials are ideal for integrating with nanoscale photonic structures. Here we report on carefully designed air-mode silicon photonic crystal nanobeam cavities for efficient control through two-dimensional materials. By systematically investigating various types and thickness of two-dimensional materials, we are able to show that enhanced responsivity allows for giant shifts of the resonant wavelength. With atomically precise thickness over a macroscopic area, few-layer flakes give rise to quantization of the mode shifts. We extract the dielectric constant of the flakes and find that it is independent of the layer number down to a monolayer. Flexible reconfiguration of a cavity is demonstrated by stacking and removing ultrathin flakes. With an unconventional cavity design, our results open up new possibilities for photonic devices integrated with two-dimensional materials. △ Less

Submitted 17 January, 2022; originally announced January 2022.

Comments: 8 pages, 5 figures

Journal ref: Adv. Opt. Mater. 10, 2200538 (2022)

Universal map of gas-dependent kinetic selectivity in carbon nanotube growth

Authors: K. Otsuka, R. Ishimaru, A. Kobayashi, T. Inoue, R. Xiang, S. Chiashi, Y. K. Kato, S. Maruyama

Abstract: Single-walled carbon nanotubes have been a candidate for outperforming silicon in ultrascaled transistors, but the realization of nanotube-based integrated circuits requires dense arrays of purely semiconducting species. Control over kinetics and thermodynamics in tube-catalyst systems plays a key role for direct growth of such nanotube arrays, and further progress requires the comprehensive under… ▽ More Single-walled carbon nanotubes have been a candidate for outperforming silicon in ultrascaled transistors, but the realization of nanotube-based integrated circuits requires dense arrays of purely semiconducting species. Control over kinetics and thermodynamics in tube-catalyst systems plays a key role for direct growth of such nanotube arrays, and further progress requires the comprehensive understanding of seemingly contradictory reports on the growth kinetics. Here, we propose a universal kinetic model and provide its quantitative verification by ethanol-based isotope labeling experiments. While the removal of carbon from catalysts dominates the growth kinetics under a low supply of precursors, our kinetic model and experiments demonstrate that chirality-dependent growth rates emerge when sufficient amounts of carbon and etching agents are co-supplied. As the model can be extended to create kinetic maps as a function of gas compositions, our findings resolve discrepancies in literature and offer rational strategies for chirality selective growth for practical applications. △ Less

Submitted 16 November, 2021; originally announced November 2021.

Comments: 9 pages, 4 figures

Journal ref: ACS Nano 16, 5627 (2022)

Determinant-free fermionic wave function using feed-forward neural networks

Authors: Koji Inui, Yasuyuki Kato, Yukitoshi Motome

Abstract: We propose a general framework for finding the ground state of many-body fermionic systems by using feed-forward neural networks. The anticommutation relation for fermions is usually implemented to a variational wave function by the Slater determinant (or Pfaffian), which is a computational bottleneck because of the numerical cost of $O(N^3)$ for $N$ particles. We bypass this bottleneck by explici… ▽ More We propose a general framework for finding the ground state of many-body fermionic systems by using feed-forward neural networks. The anticommutation relation for fermions is usually implemented to a variational wave function by the Slater determinant (or Pfaffian), which is a computational bottleneck because of the numerical cost of $O(N^3)$ for $N$ particles. We bypass this bottleneck by explicitly calculating the sign changes associated with particle exchanges in real space and using fully connected neural networks for optimizing the rest parts of the wave function. This reduces the computational cost to $O(N^2)$ or less. We show that the accuracy of the approximation can be improved by optimizing the "variance" of the energy simultaneously with the energy itself. We also find that a reweighting method in Monte Carlo sampling can stabilize the calculation. These improvements can be applied to other approaches based on variational Monte Carlo methods. Moreover, we show that the accuracy can be further improved by using the symmetry of the system, the representative states, and an additional neural network implementing a generalized Gutzwiller-Jastrow factor. We demonstrate the efficiency of the method by applying it to a two-dimensional Hubbard model. △ Less

Submitted 22 August, 2021; v1 submitted 19 August, 2021; originally announced August 2021.

Journal ref: Phys. Rev. Research 3, 043126 (2021)

Chiral modes near exceptional points in symmetry broken H1 photonic crystal cavities

Authors: C. F. Fong, Y. Ota, Y. Arakawa, S. Iwamoto, Y. K. Kato

Abstract: The H1 photonic crystal cavity supports two degenerate dipole modes of orthogonal linear polarization which could give rise to circularly polarized fields when driven with a $π$/$2$ phase difference. However, fabrication errors tend to break the symmetry of the cavity which lifts the degeneracy of the modes, rendering the cavity unsuitable for supporting circular polarization. We demonstrate numer… ▽ More The H1 photonic crystal cavity supports two degenerate dipole modes of orthogonal linear polarization which could give rise to circularly polarized fields when driven with a $π$/$2$ phase difference. However, fabrication errors tend to break the symmetry of the cavity which lifts the degeneracy of the modes, rendering the cavity unsuitable for supporting circular polarization. We demonstrate numerically, a scheme that induces chirality in the cavity modes, thereby achieving a cavity that supports intrinsic circular polarization. By selectively modifying two air holes around the cavity, the dipole modes could interact via asymmetric coherent backscattering which is a non-Hermitian process. With suitable air hole parameters, the cavity modes approach the exceptional point, coalescing in frequencies and linewidths as well as giving rise to significant circular polarization close to unity. The handedness of the chirality can be selected depending on the choice of the modified air holes. Our results highlight the prospect of using the H1 photonic crystal cavity for chiral-light matter coupling in applications such as valleytronics, spin-photon interfaces and the generation of single photons with well-defined spins. △ Less

Submitted 30 July, 2021; originally announced July 2021.

Comments: 25 pages, 9 figures

Journal ref: Phys. Rev. Research 3, 043096 (2021)

Waveguide coupled cavity-enhanced light emission from individual carbon nanotubes

Authors: D. Yamashita, H. Machiya, K. Otsuka, A. Ishii, Y. K. Kato

Abstract: We demonstrate an individual single-walled carbon nanotube light emitter integrated onto a microcavity and a waveguide operating in the telecom wavelength regime. Light emission from the carbon nanotube is enhanced at the cavity resonance and is efficiently extracted from the waveguide facet. We have transferred carbon nanotubes to a nanobeam cavity with a dry process, ensuring that an individual… ▽ More We demonstrate an individual single-walled carbon nanotube light emitter integrated onto a microcavity and a waveguide operating in the telecom wavelength regime. Light emission from the carbon nanotube is enhanced at the cavity resonance and is efficiently extracted from the waveguide facet. We have transferred carbon nanotubes to a nanobeam cavity with a dry process, ensuring that an individual carbon nanotube is used. The guided light emission from a chirality-identified single carbon nanotube has a narrow linewidth of less than 1.3 nm and an off-resonance rejection of $\sim$17 dB. The waveguide-coupled device configuration is compatible with fully integrated on-chip designs and is promising for carbon-nanotube-based photonics. △ Less

Submitted 7 January, 2021; originally announced January 2021.

Comments: 5 pages, 4 figures

Journal ref: APL Photonics 6, 031302 (2021)

Development of novel silicon sensors with high time and spatial resolution

Authors: Taikan Suehara, Yuto Deguchi, Yuto Uesugi, Yu Kato, Ryo Yonamine

Abstract: Silicon pad sensors with novel functions of higher timing resolution (LGAD: Low Gain Avalanche Detector) and higher position resolution (PSD: Position Sensitive Detector) are studied for an application to Silicon-Tungsten electromagnetic calorimeter for a detector of the International Linear Collider (ILC). Prototype sensors are fabricated, equipped with dedicated ASICs (Application-Specific Integ… ▽ More Silicon pad sensors with novel functions of higher timing resolution (LGAD: Low Gain Avalanche Detector) and higher position resolution (PSD: Position Sensitive Detector) are studied for an application to Silicon-Tungsten electromagnetic calorimeter for a detector of the International Linear Collider (ILC). Prototype sensors are fabricated, equipped with dedicated ASICs (Application-Specific Integrated Circuits) and tested with a positron beam as well as a radioisotope. The first results of the measurements of timing resolution with LGADs and position reconstruction with PSDs are reported. △ Less

Submitted 6 January, 2021; originally announced January 2021.

Comments: 5 pages, 4 figures, submitted to 2019 annual report of Research Center for ELectron PHoton Science (ELPH), Tohoku University

Analysis of SiW-ECAL technological prototype beam test with electron beam

Authors: Yu Kato, Kiichi Goto, Taikan Suehara, CALICE SiW-ECAL group

Abstract: The beam test for the SiW-ECAL technological prototype was conducted using electron beam in June-July 2019 at DESY test beam facility in Hamburg, Germany. In the beam test, there were two main programs: MIP program (without tungsten) and shower program (with tungsten). The purposes of the MIP program are energy calibration, pedestal uniformity/stability assessment, TDC operation test, and retrigge… ▽ More The beam test for the SiW-ECAL technological prototype was conducted using electron beam in June-July 2019 at DESY test beam facility in Hamburg, Germany. In the beam test, there were two main programs: MIP program (without tungsten) and shower program (with tungsten). The purposes of the MIP program are energy calibration, pedestal uniformity/stability assessment, TDC operation test, and retrigger verification. On the other hand, the shower program aims to evaluate energy resolution through beam energy measurement. In addition, several operation tests with FEV13 were also conducted such as individual threshold control and auto gain mode. This article presents the performance of the technological prototype of SiW-ECAL, mainly focusing on the version of FEV13-Jp. △ Less

Submitted 27 February, 2020; originally announced February 2020.

Comments: 6 pages, 4 figures, Proceedings for Calorimetry for the High Energy Frontier (CHEF2019)

Phase Transitions in Binary Categorization: Evidence for Dual-System Decision Making

Authors: Ihor Lubashevsky, Ian Wilson, Rio Suzuki, Yuki Kato

Abstract: We report experiment results on binary categorization of (i) gray color, (ii) speech sounds, and (iii) number discrimination. Data analysis is based on constructing psychometric functions and focusing on asymptotics. We discuss the transitions between two types of subjects' response to stimuli presented for two-category classification, e.g., visualized shade of gray into "light-gray" or "dark-gray… ▽ More We report experiment results on binary categorization of (i) gray color, (ii) speech sounds, and (iii) number discrimination. Data analysis is based on constructing psychometric functions and focusing on asymptotics. We discuss the transitions between two types of subjects' response to stimuli presented for two-category classification, e.g., visualized shade of gray into "light-gray" or "dark-gray." Response types are (i) the conscious choice of non-dominant category, described by the deep tails of psychometric function, and (ii) subjects' physical errors in recording decisions in cases where the category choice is obvious. Explanation of results is based on the concept of dual-system decision making. When the choice is obvious, System 1 (fast and automatic) determines subjects' actions, with higher probability of physical errors than when subjects' decision-making is based on slow, deliberate analysis (System 2). Results provide possible evidence for hotly debated dual-system theories of cognitive phenomena. △ Less

Submitted 10 October, 2019; originally announced October 2019.

Comments: Presented at the 34th Annual Meeting of the International Society for Psychophysics Fechner Day 2018, Luneburg, Germany, 20-24 August 2018

Evaluation of Gadolinium's Action on Water Cherenkov Detector Systems with EGADS

Authors: Ll. Marti, M. Ikeda, Y. Kato, Y. Kishimoto, M. Nakahata, Y. Nakajima, Y. Nakano, S. Nakayama, Y. Okajima, A. Orii, G. Pronost, H. Sekiya, M. Shiozawa, H. Tanaka, K. Ueno, S. Yamada, T. Yano, T. Yokozawa, M. Murdoch, J. Schuemann, M. R. Vagins, K. Bays, G. Carminati, N. J. Griskevich, W. R. Kropp , et al. (43 additional authors not shown)

Abstract: Used for both proton decay searches and neutrino physics, large water Cherenkov (WC) detectors have been very successful tools in particle physics. They are notable for their large masses and charged particle detection capabilities. While current WC detectors reconstruct charged particle tracks over a wide energy range, they cannot efficiently detect neutrons. Gadolinium (Gd) has the largest therm… ▽ More Used for both proton decay searches and neutrino physics, large water Cherenkov (WC) detectors have been very successful tools in particle physics. They are notable for their large masses and charged particle detection capabilities. While current WC detectors reconstruct charged particle tracks over a wide energy range, they cannot efficiently detect neutrons. Gadolinium (Gd) has the largest thermal neutron capture cross section of all stable nuclei and produces an 8 MeV gamma cascade that can be detected with high efficiency. Because of the many new physics opportunities that neutron tagging with a Gd salt dissolved in water would open up, a large-scale R&D program called EGADS was established to demonstrate this technique's feasibility. EGADS features all the components of a WC detector, chiefly a 200-ton stainless steel water tank furnished with 240 photo-detectors, DAQ, and a water system that removes all impurities in water while keeping Gd in solution. In this paper we discuss the milestones towards demonstrating the feasibility of this novel technique, and the features of EGADS in detail. △ Less

Submitted 26 February, 2020; v1 submitted 30 August, 2019; originally announced August 2019.

Comments: 25 pages, 11 figures, 1 table

Measurement of the $ν_μ$ charged-current cross sections on water, hydrocarbon, iron, and their ratios with the T2K on-axis detectors

Authors: K. Abe, R. Akutsu, A. Ali, C. Andreopoulos, L. Anthony, M. Antonova, S. Aoki, A. Ariga, Y. Ashida, Y. Awataguchi, Y. Azuma, S. Ban, M. Barbi, G. J. Barker, G. Barr, C. Barry, M. Batkiewicz-Kwasniak, F. Bench, V. Berardi, S. Berkman, R. M. Berner, L. Berns, S. Bhadra, S. Bienstock, A. Blondely , et al. (292 additional authors not shown)

Abstract: We report a measurement of the flux-integrated $ν_μ$ charged-current cross sections on water, hydrocarbon, and iron in the T2K on-axis neutrino beam with a mean neutrino energy of 1.5 GeV. The measured cross sections on water, hydrocarbon, and iron are $σ^{\rm{H_{2}O}}_{\rm{CC}}$ = (0.840$\pm 0.010$(stat.)$^{+0.10}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, $σ^{\rm{CH}}_{\rm{CC}}$ = (0.817… ▽ More We report a measurement of the flux-integrated $ν_μ$ charged-current cross sections on water, hydrocarbon, and iron in the T2K on-axis neutrino beam with a mean neutrino energy of 1.5 GeV. The measured cross sections on water, hydrocarbon, and iron are $σ^{\rm{H_{2}O}}_{\rm{CC}}$ = (0.840$\pm 0.010$(stat.)$^{+0.10}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, $σ^{\rm{CH}}_{\rm{CC}}$ = (0.817$\pm 0.007$(stat.)$^{+0.11}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, and $σ^{\rm{Fe}}_{\rm{CC}}$ = (0.859$\pm 0.003$(stat.) $^{+0.12}_{-0.10}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon respectively, for a restricted phase space of induced muons: $θ_μ<45^{\circ}$ and $p_μ>$0.4 GeV/$c$ in the laboratory frame. The measured cross section ratios are ${σ^{\rm{H_{2}O}}_{\rm{CC}}}/{σ^{\rm{CH}}_{\rm{CC}}}$ = 1.028$\pm 0.016$(stat.)$\pm 0.053$(syst.), ${σ^{\rm{Fe}}_{\rm{CC}}}/{σ^{\rm{H_{2}O}}_{\rm{CC}}}$ = 1.023$\pm 0.012$(stat.)$\pm 0.058$(syst.), and ${σ^{\rm{Fe}}_{\rm{CC}}}/{σ^{\rm{CH}}_{\rm{CC}}}$ = 1.049$\pm 0.010$(stat.)$\pm 0.043$(syst.). These results, with an unprecedented precision for the measurements of neutrino cross sections on water in the studied energy region, show good agreement with the current neutrino interaction models used in the T2K oscillation analyses. △ Less

Submitted 21 April, 2019; originally announced April 2019.

Journal ref: Prog Theor Exp Phys (2019)

Maximum efficiencies and performance limiting factors of inorganic and hybrid perovskite solar cells

Authors: Yoshitsune Kato, Shohei Fujimoto, Masayuki Kozawa, Hiroyuki Fujiwara

Abstract: The Shockley and Queisser limit, a well-known efficiency limit for a solar cell, is based on unrealistic physical assumptions and its maximum limit is seriously overestimated. To understand the power loss mechanisms of record-efficiency cells, a more rigorous approach is necessary. Here, we have established a new formalism that can accurately predict absolute performance limits of solar cells in c… ▽ More The Shockley and Queisser limit, a well-known efficiency limit for a solar cell, is based on unrealistic physical assumptions and its maximum limit is seriously overestimated. To understand the power loss mechanisms of record-efficiency cells, a more rigorous approach is necessary. Here, we have established a new formalism that can accurately predict absolute performance limits of solar cells in conventional thin film form. In particular, we have estimated the maximum efficiencies of 13 well-studied solar cell materials [GaAs, InP, CdTe, a-Si:H, CuInSe2, CuGaSe2, CuInGaSe2, Cu2ZnSnSe4, Cu2ZnSnS4, Cu2ZnSn(S,Se)4, Cu2ZnGeSe4, CH3NH3PbI3, HC(NH2)2PbI3] in a 1-um-thick physical limit. Our calculation shows that over 30% efficiencies can be achieved for absorber layers with sharp absorption edges (GaAs, InP, CdTe, CuInGaSe2, Cu2ZnGeSe4). Nevertheless, many record-efficiency polycrystalline solar cells, including hybrid perovskites, are limited by open-circuit voltage and fill-factor losses. We show that the maximum conversion efficiencies described here present new alternative limits that can predict the power generation of real-world solar cells. △ Less

Submitted 30 July, 2019; v1 submitted 12 April, 2019; originally announced April 2019.

Comments: 36 pages, 10 figures

Journal ref: Phys. Rev. Applied 12, 024039 (2019)

Super-Resolution Fluorescence Imaging of Carbon Nanotubes Using a Nonlinear Excitonic Process

Authors: K. Otsuka, A. Ishii, Y. K. Kato

Abstract: Highly efficient exciton-exciton annihilation process unique to one-dimensional systems is utilized for super-resolution imaging of air-suspended carbon nanotubes. Through the comparison of fluorescence signals in linear and sublinear regimes at different excitation powers, we extract the efficiency of the annihilation processes using conventional confocal microscopy. Spatial images of the annihil… ▽ More Highly efficient exciton-exciton annihilation process unique to one-dimensional systems is utilized for super-resolution imaging of air-suspended carbon nanotubes. Through the comparison of fluorescence signals in linear and sublinear regimes at different excitation powers, we extract the efficiency of the annihilation processes using conventional confocal microscopy. Spatial images of the annihilation rate of the excitons have resolution beyond the diffraction limit. We investigate excitation power dependence of the annihilation processes by experiment and Monte Carlo simulation, and the resolution improvement of the annihilation images can be quantitatively explained by the superlinearity of the annihilation process. We have also developed another method in which the cubic dependence of the annihilation rate on exciton density is utilized to achieve further sharpening of single nanotube images. △ Less

Submitted 19 March, 2019; originally announced March 2019.

Comments: 7 pages, 5 figures

Journal ref: Opt. Express 27, 17463 (2019)

Measurement of the electron transmission rate of the gating foil for the TPC of the ILC experiment

Authors: M. Kobayashi, T. Ogawa, A. Shoji, Y. Aoki, K. Ikematsu, P. Gros, T. Kawaguchi, D. Arai, M. Iwamura, K. Katsuki, A. Koto, M. Yoshikai, K. Fujii, T. Fusayasu, Y. Kato, S. Kawada, T. Matsuda, S. Narita, K. Negishi, H. Qi, R. D. Settles, A. Sugiyama, T. Takahashi, J. Tian, T. Watanabe , et al. (1 additional authors not shown)

Abstract: We have developed a gating foil for the time projection chamber envisaged as a central tracker for the international linear collider experiment. It has a structure similar to the Gas Electron Multiplier (GEM) with a higher optical aperture ratio and functions as an ion gate without gas amplification. The transmission rate for electrons was measured in a counting mode for a wide range of the voltag… ▽ More We have developed a gating foil for the time projection chamber envisaged as a central tracker for the international linear collider experiment. It has a structure similar to the Gas Electron Multiplier (GEM) with a higher optical aperture ratio and functions as an ion gate without gas amplification. The transmission rate for electrons was measured in a counting mode for a wide range of the voltages applied across the foil using an $^{55}$Fe source and a laser in the absence of a magnetic field. The blocking power of the foil against positive ions was estimated from the electron transmissions. △ Less

Submitted 1 May, 2019; v1 submitted 5 March, 2019; originally announced March 2019.

Comments: 25 pages containing 14 figures and 1 table

Journal ref: Nucl. Instrum. Methods Phys. Res. A 918 (2019) 41-53

Superionic diffusion through frustrated energy landscape

Authors: D. Di Stefano, A. Miglio, K. Robeyns, Y. Filinchuk, M. Lechartier, A. Senyshyn, H. Ishida, S. Spannenberger, D. Prutsch, S. Lunghammer, D. Rettenwander, M. Wilkening, B. Roling, Y. Kato, G. Hautier

Abstract: Solid-state materials with high ionic conduction are necessary to many technologies including all-solid-state Li-ion batteries. Understanding how crystal structure dictates ionic diffusion is at the root of the development of fast ionic conductors. Here, we show that LiTi2(PS4)3 exhibits a Li-ion diffusion coefficient about an order of magnitude higher than current state-of-the-art lithium superio… ▽ More Solid-state materials with high ionic conduction are necessary to many technologies including all-solid-state Li-ion batteries. Understanding how crystal structure dictates ionic diffusion is at the root of the development of fast ionic conductors. Here, we show that LiTi2(PS4)3 exhibits a Li-ion diffusion coefficient about an order of magnitude higher than current state-of-the-art lithium superionic conductors. We rationalize this observation by the unusual crystal structure of LiTi2(PS4)3 which offers no regular tetrahedral or octahedral sites for lithium to favorably occupy. This creates a smooth, frustrated energy landscape resembling more the energy landscapes present in liquids than in typical solids. This frustrated energy landscape leads to a high diffusion coefficient combining low activation energy with a high pre-factor. △ Less

Submitted 24 July, 2019; v1 submitted 8 August, 2017; originally announced August 2017.

Burst intensification by singularity emitting radiation in multi-stream flows

Authors: A. S. Pirozhkov, T. Zh. Esirkepov, T. A. Pikuz, A. Ya. Faenov, K. Ogura, Y. Hayashi, H. Kotaki, E. N. Ragozin, D. Neely, H. Kiriyama, J. K. Koga, Y. Fukuda, A. Sagisaka, M. Nishikino, T. Imazono, N. Hasegawa, T. Kawachi, P. R. Bolton, H. Daido, Y. Kato, K. Kondo, S. V. Bulanov, M. Kando

Abstract: In various media the elementary components can emit traveling waves such as electromagnetic, gravitational or acoustic types. If these elementary emitters are synchronized, the resulting emission is coherent. Moreover, the faster the emitters approach an observer, the more intense and directional their apparent emission is, with associated frequency increase. Multi-stream flows ubiquitously occur… ▽ More In various media the elementary components can emit traveling waves such as electromagnetic, gravitational or acoustic types. If these elementary emitters are synchronized, the resulting emission is coherent. Moreover, the faster the emitters approach an observer, the more intense and directional their apparent emission is, with associated frequency increase. Multi-stream flows ubiquitously occur in media (such as with shock waves and jets in astrophysical and laboratory plasmas) and produce fast moving density singularities, where high concentration and synchronism can bring constructive interference. However, a singularity emitting such characteristic coherent radiation has not been demonstrated yet. We show this general phenomenon in laser-driven relativistic plasma, which is an ideal medium for realizing these effects in the laboratory under controllable conditions. Our experiments and simulations reveal bright coherent soft x-ray radiation from nanoscale electron density singularities in multi-stream plasma. They constitute a new compact x-ray source of ultrashort duration, demanded in numerous applications. In general, singularities can be bright sources of other types of traveling waves. Thus our findings open new opportunities in different fields of science. For example, gravitational wave generation, as proposed in ultrahigh-energy accelerators, can be significantly enhanced by intentionally induced density singularities in the particle bunches. Further, we anticipate that multi-stream flows in cosmic media can produce intense bursts of coherent electromagnetic and/or gravitational waves, especially at longer wavelengths which facilitate constructive interference. We can then expect to observe more directional short wavelength bursts from cosmic emitters approaching at relativistic speeds. Thus, we present a new framework for interpreting a broad range of experimental results. △ Less

Submitted 16 November, 2016; originally announced November 2016.

Journal ref: Scientific Reports 7, 17968 (2017)

A novel technique for the measurement of the avalanche fluctuation of gaseous detectors

Authors: Makoto Kobayashi, Tomohisa Ogawa, Tomohiko Kawaguchi, Keisuke Fujii, Takahiro Fusayasu, Katsumasa Ikematsu, Yukihiro Kato, Shin-ichi Kawada, Takeshi Matsuda, Ronald Dean Settles, Akira Sugiyama, Tohru Takahashi, Junping Tian, Takashi Watanabe, Ryo Yonamine

Abstract: We have developed a novel technique for the measurement of the avalanche fluctuation of gaseous detectors using a UV laser. The technique is simple and requires a short data-taking time of about ten minutes. Furthermore, it is applicable for relatively low gas gains. Our experimental setup as well as the measurement principle, and the results obtained with a stack of Gas Electron Multipliers (GEMs… ▽ More We have developed a novel technique for the measurement of the avalanche fluctuation of gaseous detectors using a UV laser. The technique is simple and requires a short data-taking time of about ten minutes. Furthermore, it is applicable for relatively low gas gains. Our experimental setup as well as the measurement principle, and the results obtained with a stack of Gas Electron Multipliers (GEMs) operated in several gas mixtures are presented. △ Less

Submitted 21 March, 2023; v1 submitted 3 July, 2016; originally announced July 2016.

Comments: A supplemental material (Addendum to be published in Nucl. Instrum. Methods Phys. Res. A) was added at the end of the manuscript. 8 pages, including 7 figures

Journal ref: Nuclear Instruments and Methods in Physics Research A 845 (2017) 236-240

A Time Projection Chamber with GEM-Based Readout

Authors: The LCTPC Collaboration, David Attié, Ties Behnke, Alain Bellerive, Oleg Bezshyyko, Deb Sankar Bhattacharya, Purba Bhattacharya, Sudeb Bhattacharya, Stefano Caiazza, Paul Colas, Gilles De Lentdecker, Klaus Dehmelt, Klaus Desch, Ralf Diener, Madhu Dixit, Ivor Fleck, Keisuke Fujii, Takahiro Fusayasu, Serguei Ganjour, Yuanning Gao, Philippe Gros, Peter Hayman, Vincent Hedberg, Katsumasa Ikematsu, Leif Jönsson , et al. (45 additional authors not shown)

Abstract: For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the main tracking detector is investigated. In this paper, results from a prototype TPC, placed in a 1 T solenoidal field and read out with three independent GEM-based readout modules, are reported. The TPC was exposed to a… ▽ More For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the main tracking detector is investigated. In this paper, results from a prototype TPC, placed in a 1 T solenoidal field and read out with three independent GEM-based readout modules, are reported. The TPC was exposed to a 6 GeV electron beam at the DESY II synchrotron. The efficiency for reconstructing hits, the measurement of the drift velocity, the space point resolution and the control of field inhomogeneities are presented. △ Less

Submitted 4 April, 2016; originally announced April 2016.

Comments: 22 pages, 19 figures

Report number: DESY 16-059

Observation of gamma ray bursts at ground level under the thunderclouds

Authors: Y. Kuroda, S. Oguri, Y. Kato, R. Nakata, Y. Inoue, C. Ito, M. Minowa

Abstract: We observed three $γ$-ray bursts related to thunderclouds in winter using the prototype of anti-neutrino detector PANDA made of 360-kg plastic scintillator deployed at Ohi Power Station at the coastal area of the Japan Sea. The maximum rate of the events which deposited the energy higher than $3\,$MeV was $(5.5 \pm 0.1) \times 10^2 {\rm /s}$. Monte Carlo simulation showed that electrons with app… ▽ More We observed three $γ$-ray bursts related to thunderclouds in winter using the prototype of anti-neutrino detector PANDA made of 360-kg plastic scintillator deployed at Ohi Power Station at the coastal area of the Japan Sea. The maximum rate of the events which deposited the energy higher than $3\,$MeV was $(5.5 \pm 0.1) \times 10^2 {\rm /s}$. Monte Carlo simulation showed that electrons with approximately monochromatic energy falling downwards from altitudes of order $100\,$m roughly produced the observed total energy spectra of the bursts. It is supposed that secondary cosmic-ray electrons, which act as seed, were accelerated in electric field of thunderclouds and multiplied by relativistic runaway electron avalanche. We actually found that the $γ$-rays of the bursts entered into the detector from the direction close to the zenith. The direction stayed constant during the burst within the detector resolution. In addition, taking advantage of the delayed coincidence detection of the detector, we found neutron events in one of the bursts at the maximum rate of $\sim 14\pm5\,{\rm /s}$. △ Less

Submitted 12 May, 2016; v1 submitted 24 January, 2016; originally announced January 2016.

Comments: 16 pages, 7 figures; Accepted for publication in Physics Letters B; Figure 5 added, some minor changes in the text

Journal ref: Physics Letters B, 758 (2016), pp. 286-291

Measurement of the $B_c^{\pm}$ production cross section in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: We describe a measurement of the ratio of the cross sections times branching fractions of the $B_c^+$ meson in the decay mode $B_c^+ \rightarrow J/ψμν$ to the $B^+$ meson in the decay mode $B^+ \rightarrow J/ψK^+$ in proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV. The measurement is based on the complete CDF Run II data set, which comes from an integrated luminosity of… ▽ More We describe a measurement of the ratio of the cross sections times branching fractions of the $B_c^+$ meson in the decay mode $B_c^+ \rightarrow J/ψμν$ to the $B^+$ meson in the decay mode $B^+ \rightarrow J/ψK^+$ in proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV. The measurement is based on the complete CDF Run II data set, which comes from an integrated luminosity of $8.7\,{\rm fb}^{-1}$. The ratio of the production cross sections times branching fractions for $B_c^+$ and $B_c^+$ mesons with momentum transverse to the beam greater than $6~\textrm{GeV}/c$ and rapidity magnitude smaller than 0.6 is $0.211\pm 0.012~\mbox{(stat)}^{+0.021}_{-0.020}~\mbox{(syst)}$. Using the known $B^+ \rightarrow J/ψK^+$ branching fraction, the known $B^+$ production cross section, and a selection of the predicted $B_c^+ \rightarrow J/ψμν$ branching fractions, the range for the total $B_c^+$ production cross section is estimated. △ Less

Submitted 26 March, 2016; v1 submitted 15 January, 2016; originally announced January 2016.

Comments: 28 pages, 25 figures, and 20 tables. This version is consistent with paper published in Phys. Rev. D on March 1, 2016

Report number: FERMILAB-PUB-16-008-E-PPD

Journal ref: Phys. Rev. D 93, 052001 (2016)

Online Monitoring of the Osiris Reactor with the Nucifer Neutrino Detector

Authors: G. Boireau, L. Bouvet, A. P. Collin, G. Coulloux, M. Cribier, H. Deschamp, V. Durand, M. Fechner, V. Fischer, J. Gaffiot, N. Gerard Castaing, R. Granelli, Y. Kato, T. Lasserre, L. Latron, P. Legou, A. Letourneau, D. Lhuillier, G. Mention, T. Mueller, T-A. Nghiem, N. Pedrol, J. Pelzer, M. Pequignot, Y. Piret , et al. (29 additional authors not shown)

Abstract: Originally designed as a new nuclear reactor monitoring device, the Nucifer detector has successfully detected its first neutrinos. We provide the second shortest baseline measurement of the reactor neutrino flux. The detection of electron antineutrinos emitted in the decay chains of the fission products, combined with reactor core simulations, provides an new tool to assess both the thermal power… ▽ More Originally designed as a new nuclear reactor monitoring device, the Nucifer detector has successfully detected its first neutrinos. We provide the second shortest baseline measurement of the reactor neutrino flux. The detection of electron antineutrinos emitted in the decay chains of the fission products, combined with reactor core simulations, provides an new tool to assess both the thermal power and the fissile content of the whole nuclear core and could be used by the Inter- national Agency for Atomic Energy (IAEA) to enhance the Safeguards of civil nuclear reactors. Deployed at only 7.2m away from the compact Osiris research reactor core (70MW) operating at the Saclay research centre of the French Alternative Energies and Atomic Energy Commission (CEA), the experiment also exhibits a well-suited configuration to search for a new short baseline oscillation. We report the first results of the Nucifer experiment, describing the performances of the 0.85m3 detector remotely operating at a shallow depth equivalent to 12m of water and under intense background radiation conditions. Based on 145 (106) days of data with reactor ON (OFF), leading to the detection of an estimated 40760 electron antineutrinos, the mean number of detected antineutrinos is 281 +- 7(stat) +- 18(syst) electron antineutrinos/day, in agreement with the prediction 277(23) electron antineutrinos/day. Due the the large background no conclusive results on the existence of light sterile neutrinos could be derived, however. As a first societal application we quantify how antineutrinos could be used for the Plutonium Management and Disposition Agreement. △ Less

Submitted 25 May, 2016; v1 submitted 18 September, 2015; originally announced September 2015.

Comments: 22 pages, 16 figures - Version 4

Journal ref: Phys. Rev. D 93, 112006 (2016)

Development FD-SOI MOSFET amplifiers for integrated read-out circuit of superconducting-tunnel-junction single-photon-detectors

Authors: Kenji Kiuchi, Shinhong Kim, Yuji Takeuchi, Kenichi Takemasa, Kazuki Nagata, Kota Kasahara, Koya Moriuchi, Ren Senzaki, Shunsuke Yagi, Hirokazu Ikeda, Shuji Matsuura, Takehiko Wada, Hirokazu Ishino, Atsuko Kibayashi, Hiromi Sato, Satoru Mima, Takuo Yoshida, Ryuta Hirose, Yukihiro Kato, Masasi Hazumi, Yasuo Arai, Ikuo Kurachi, Erik Ramgerg, Mark Kozlovsky, Paul Rubinov , et al. (6 additional authors not shown)

Abstract: We proposed a new high resolution single photon infrared spectrometer for search for radiative decay of cosmic neutrino background(C$ν$B). The superconducting-tunnel-junctions(STJs) are used as a single photoncounting device. Each STJ consists of Nb/Al/Al${}_{\mathrm{x}}$O${}_{\mathrm{y}}$/Al/Nb layers and their thicknesses are optimized for the operation temperature at 370 mK cooled by a… ▽ More We proposed a new high resolution single photon infrared spectrometer for search for radiative decay of cosmic neutrino background(C$ν$B). The superconducting-tunnel-junctions(STJs) are used as a single photoncounting device. Each STJ consists of Nb/Al/Al${}_{\mathrm{x}}$O${}_{\mathrm{y}}$/Al/Nb layers and their thicknesses are optimized for the operation temperature at 370 mK cooled by a ${}^{3}$He sorption refrigerator. Our STJs achieved the leak current 250 pA and the measured data implies that a smaller area STJ fulfills our requirement. FD-SOI MOSFETs are employed to amplify the STJ signal current in order to increase signal-to-noise ratio(S/N). FD-SOI MOSFETs can be operated at cryogenic temperature of 370 mK, which reduces the noise of the signal amplification system. FD-SOI MOSFET characteristics are measured at cryogenic temperature. The Id-Vgs curve shows a sharper turn on with a higher threshold voltage and the Id-Vds curve shows a non linear shape in linear region at cryogenic temperature. Taking into account these effects, FD-SOI MOSFETs are available for read-out circuit of STJ detectors. The bias voltage for STJ detectors are 0.4 mV and it must be well stabilized to deliver high performance. We proposed an FD-SOI MOSFET based charge integrated amplifier design as a read-out circuit of STJ detectors. The requirements for an operational amplifier used in the amplifier is estimated using SPICE simulation. The op-amp required to have a fast response(GBW$\geq$100 MHz) and it must have low power dissipation as compared to the cooling power of refrigerator. △ Less

Submitted 27 July, 2015; originally announced July 2015.

Comments: Proceedings of International Workshop on SOI Pixel Detector (SOIPIX2015), Tohoku University, Sendai, Japan, 3-6, June, 2015. C15-06-03

Status of the Bio-Nano electron cyclotron resonance ion source at Toyo University

Authors: T. Uchida, H. Minezaki, S. Ishihara, M. Muramatsu, R. Racz, T. Asaji, A. Kitagawa, Y. Kato, S. Biri, A. G. Drentje, Y. Yoshida

Abstract: In the paper, the material science experiments, carried out recently using the Bio-Nano electron cyclotron resonance ion source (ECRIS) at Toyo University, are reported. We have investigated several methods to synthesize endohedral C60 using ion-ion and ion-molecule collision reaction in the ECRIS. Because of the simplicity of the configuration, we can install a large choice of additional equipmen… ▽ More In the paper, the material science experiments, carried out recently using the Bio-Nano electron cyclotron resonance ion source (ECRIS) at Toyo University, are reported. We have investigated several methods to synthesize endohedral C60 using ion-ion and ion-molecule collision reaction in the ECRIS. Because of the simplicity of the configuration, we can install a large choice of additional equipment in the ECRIS. The Bio-Nano ECRIS is suitable not only to test the materials production but also to test technical developments to improve or understand the performance of an ECRIS. △ Less

Submitted 28 January, 2015; originally announced January 2015.

Fullerene-rare gas mixed plasmas in an electron cyclotron resonance ion source

Authors: T. Asaji, T. Ohba, T. Uchida, H. Minezaki, S. Ishihara, R. Racz, M. Muramatsu, S. Biri, A. Kitagawa, Y. Kato, Y. Yoshida

Abstract: A synthesis technology of endohedral fullerenes such as Fe@C60 has developed with an electron cyclotron resonance (ECR) ion source. The production of N@C60 was reported. However, the yield was quite low, since most fullerene molecules were broken in the ECR plasma. We have adopted gas-mixing techniques in order to cool the plasma and then reduce fullerene dissociation. Mass spectra of ion beams ex… ▽ More A synthesis technology of endohedral fullerenes such as Fe@C60 has developed with an electron cyclotron resonance (ECR) ion source. The production of N@C60 was reported. However, the yield was quite low, since most fullerene molecules were broken in the ECR plasma. We have adopted gas-mixing techniques in order to cool the plasma and then reduce fullerene dissociation. Mass spectra of ion beams extracted from fullerene-He, Ar or Xe mixed plasmas were observed with a Faraday cup. From the results, the He gas mixing technique is effective against fullerene destruction. △ Less

Submitted 28 January, 2015; originally announced January 2015.

Two-frequency heating technique at the 18 GHz electron cyclotron resonance ion source of the National Institute of Radiological Sciences

Authors: S. Biri, A. Kitagawa, M. Muramatsu, A. G. Drentje, R. Rácz, K. Yano, Y. Kato, N. Sasaki, W. Takasugi

Abstract: The two-frequency heating technique was studied to increase the beam intensities of highly charged ions provided by the high-voltage extraction configuration (HEC) ion source at the National Institute of Radiological Sciences (NIRS). The observed dependences on microwave power and frequency suggested that this technique improved plasma stability but it required precise frequency tuning and more mi… ▽ More The two-frequency heating technique was studied to increase the beam intensities of highly charged ions provided by the high-voltage extraction configuration (HEC) ion source at the National Institute of Radiological Sciences (NIRS). The observed dependences on microwave power and frequency suggested that this technique improved plasma stability but it required precise frequency tuning and more microwave power than was available before 2013. Recently, a new, high-power (1200 W) wide bandwidth (17.1-18.5 GHz) travelling-wave-tube amplifier (TWTA) was installed. After some single tests with klystron and TWT amplifiers the simultaneous injection of the two microwaves has been successfully realized. The dependence of highly charged ions (HCI) currents on the superposed microwave power was studied by changing only the output power of one of the two amplifiers, alternatively. While operating the klystron on its fixed 18.0 GHz, the frequency of the TWTA was swept within its full limits (17.1-18.5 GHz), and the effect of this frequency on the HCI-production rate was examined under several operation conditions. As an overall result, new beam records of highly charged argon, krypton, and xenon beams were obtained at the NIRS-HEC ion source by this high-power two-frequency operation mode. △ Less

Submitted 28 January, 2015; originally announced January 2015.

Localized guided-mode and cavity-mode double resonance in photonic crystal nanocavities

Authors: X. Liu, T. Shimada, R. Miura, S. Iwamoto, Y. Arakawa, Y. K. Kato

Abstract: We investigate the use of guided modes bound to defects in photonic crystals for achieving double resonances. Photoluminescence enhancement by more than three orders of magnitude has been observed when the excitation and emission wavelengths are simultaneously in resonance with the localized guided mode and cavity mode, respectively. We find that the localized guided modes are relatively insensiti… ▽ More We investigate the use of guided modes bound to defects in photonic crystals for achieving double resonances. Photoluminescence enhancement by more than three orders of magnitude has been observed when the excitation and emission wavelengths are simultaneously in resonance with the localized guided mode and cavity mode, respectively. We find that the localized guided modes are relatively insensitive to the size of the defect for one of the polarizations, allowing for flexible control over the wavelength combinations. This double resonance technique is expected to enable enhancement of photoluminescence and nonlinear wavelength conversion efficiencies in a wide variety of systems. △ Less

Submitted 17 December, 2014; originally announced December 2014.

Comments: 6 pages, 7 figures

Journal ref: Phys. Rev. Applied 3, 014006 (2015)

Reactor antineutrino monitoring with a plastic scintillator array as a new safeguards method

Authors: S. Oguri, Y. Kuroda, Y. Kato, R. Nakata, Y. Inoue, C. Ito, M. Minowa

Abstract: We developed a segmented reactor-antineutrino detector made of plastic scintillators for application as a tool in nuclear safeguards inspection and performed mostly unmanned field operations at a commercial power plant reactor. At a position outside the reactor building, we measured the difference in reactor antineutrino flux above the ground when the reactor was active and inactive. We developed a segmented reactor-antineutrino detector made of plastic scintillators for application as a tool in nuclear safeguards inspection and performed mostly unmanned field operations at a commercial power plant reactor. At a position outside the reactor building, we measured the difference in reactor antineutrino flux above the ground when the reactor was active and inactive. △ Less

Submitted 23 May, 2014; v1 submitted 29 April, 2014; originally announced April 2014.

Comments: 25 pages, 9 figures; Typos in Figure 6 corrected

Journal ref: Nuclear Instruments and Methods in Physics Research Section A 757 (2014) 33-39

Cosmic ray tests of a GEM-based TPC prototype operated in Ar-CF4-isobutane gas mixtures: II

Authors: M. Kobayashi, R. Yonamine, T. Tomioka, A. Aoza, H. Bito, K. Fujii, T. Higashi, K. Hiramatsu, K. Ikematsu, A. Ishikawa, Y. Kato, H. Kuroiwa, T. Matsuda, O. Nitoh, H. Ohta, K. Sakai, R. D. Settles, A. Sugiyama, H. Tsuji, T. Watanabe, H. Yamaoka, T. Yazu

Abstract: The spatial resolution along the pad-row direction was measured with a GEM-based TPC prototype for the future linear collider experiment in order to understand its performance for tracks with finite projected angles with respect to the pad-row normal. The degradation of the resolution due to the angular pad effect was confirmed to be consistent with the prediction of a simple calculation taking in… ▽ More The spatial resolution along the pad-row direction was measured with a GEM-based TPC prototype for the future linear collider experiment in order to understand its performance for tracks with finite projected angles with respect to the pad-row normal. The degradation of the resolution due to the angular pad effect was confirmed to be consistent with the prediction of a simple calculation taking into account the cluster-size distribution and the avalanche fluctuation. △ Less

Submitted 3 April, 2014; originally announced April 2014.

Comments: 11 pages, 4 figures

Journal ref: Nuclear Instruments and Methods in Physics Research A 767 (2014) 439-444

Activity report of ILD-TPC Asia group

Authors: Y. Kato, R. Yonamine, P. Gros, J. Tian, S. Kawada, K. Fujii, T. Matsuda, A. Sugiyama, O. Nitoh, T. Watanabe, T. Fusayasu, T. Takahashi, M. Kobayashi

Abstract: The purpose of ILD-TPC Asia group is realization of high precision Time Projection Chamber (TPC) with Gas Electron Multiplier (GEM) as a central tracker in International Linear Collider (ILC). We have been studying the many R&D items to build the real detector as a member of LCTPC collaboration. This paper describes the our efforts for realization of the ILD-TPC, the result of test beam using larg… ▽ More The purpose of ILD-TPC Asia group is realization of high precision Time Projection Chamber (TPC) with Gas Electron Multiplier (GEM) as a central tracker in International Linear Collider (ILC). We have been studying the many R&D items to build the real detector as a member of LCTPC collaboration. This paper describes the our efforts for realization of the ILD-TPC, the result of test beam using large prototype TPC, local field distortion, positive ion effects and gate devices, and cooling electronics which are key items to build ILD-TPC. △ Less

Submitted 30 March, 2014; originally announced March 2014.

Comments: Talk presented at the International Workshop on Future Linear Colliders (LCWS13), Tokyo, Japan, 11-15 November 2013

Development of High Intensity Laser-Electron Photon Beams up to 2.9 GeV at the SPring-8 LEPS Beamline

Authors: N. Muramatsu, Y. Kon, S. Daté, Y. Ohashi, H. Akimune, J. Y. Chen, M. Fujiwara, S. Hasegawa, T. Hotta, T. Ishikawa, T. Iwata, Y. Kato, H. Kohri, T. Matsumura, T. Mibe, Y. Miyachi, Y. Morino, T. Nakano, Y. Nakatsugawa, H. Ohkuma, T. Ohta, M. Oka, T. Sawada, A. Wakai, K. Yonehara , et al. (3 additional authors not shown)

Abstract: A laser-Compton backscattering beam, which we call a `Laser-Electron Photon' beam, was upgraded at the LEPS beamline of SPring-8. We accomplished the gains in backscattered photon beam intensities by factors of 1.5--1.8 with the injection of two adjacent laser beams or a higher power laser beam into the storage ring. The maximum energy of the photon beam was also extended from 2.4 GeV to 2.9 GeV w… ▽ More A laser-Compton backscattering beam, which we call a `Laser-Electron Photon' beam, was upgraded at the LEPS beamline of SPring-8. We accomplished the gains in backscattered photon beam intensities by factors of 1.5--1.8 with the injection of two adjacent laser beams or a higher power laser beam into the storage ring. The maximum energy of the photon beam was also extended from 2.4 GeV to 2.9 GeV with deep-ultraviolet lasers. The upgraded beams have been utilized for hadron photoproduction experiments at the LEPS beamline. Based on the developed methods, we plan the simultaneous injection of four high power laser beams at the LEPS2 beamline, which has been newly constructed at SPring-8. As a simulation result, we expect an order of magnitude higher intensities close to 10$^7$ sec$^{-1}$ and 10$^6$ sec$^{-1}$ for tagged photons up to 2.4 GeV and 2.9 GeV, respectively. △ Less

Submitted 29 August, 2013; originally announced August 2013.

Comments: 31 pages, 9 figures, Submitted to Nuclear Instruments and Methods in Physics Research Section A on 29 May 2013