-
Stabilization of vapor-rich bubble in ethanol/water mixtures and enhanced flow around the bubble
Authors:
Mizuki Kato,
Kyoko Namura,
Shinya Kawai,
Samir Kumar,
Kaoru Nakajima,
Motofumi Suzuki
Abstract:
This study investigates the behavior of microbubbles generated by the local heating of an ethanol/water mixture and the surrounding flow. The mixture is photothermally heated by focusing a continuous-wave laser on a FeSi$_2$ thin film. Although the liquid is not degassed, vapor-rich bubbles are stably generated in an ethanol concentration range of 1.5-50 wt% The vapor-rich bubbles absorb the air d…
▽ More
This study investigates the behavior of microbubbles generated by the local heating of an ethanol/water mixture and the surrounding flow. The mixture is photothermally heated by focusing a continuous-wave laser on a FeSi$_2$ thin film. Although the liquid is not degassed, vapor-rich bubbles are stably generated in an ethanol concentration range of 1.5-50 wt% The vapor-rich bubbles absorb the air dissolved in the surrounding liquid and exhale it continuously as air-rich bubbles $\sim$ 1 μm in diameter. For the same ethanol concentration range, the solutal-Marangoni force becomes dominant relative to the thermal-Marangoni force, and the air-rich bubbles are pushed away from the high-temperature region in the fluid toward the low-temperature region. Further, it was experimentally demonstrated that Marangoni forces do not significantly affect the surface of vapor-rich bubbles generated in ethanol/water mixtures, and they produce a flow from the high-temperature to the low-temperature region on the vapor-rich bubbles, which moves the exhaled air-rich bubbles away from the vapor-rich bubbles near the heat source. These effects prevent the vapor-rich and exhaled air-rich bubbles from recombining, thereby resulting in the long-term stability of the former. Moreover, the flow produced by the vapor-rich bubbles in the non-degassed 0-20 wt% ethanol/water mixture was stronger than that in degassed water. The maximum flow speed is achieved for an ethanol concentration of 5 wt%, which is 6-11 times higher than that when degassed water is utilized. The ethanol/water mixture produces vapor-rich bubbles without a degassing liquid and enhances the flow speed generated by the vapor-rich bubbles. This flow is expected to apply to driving and mixing microfluids.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
-
Partial synchronization and community switching in phase-oscillator networks and its analysis based on a bidirectional, weighted chain of three oscillators
Authors:
Masaki Kato,
Hiroshi Kori
Abstract:
Complex networks often possess communities defined based on network connectivity. When dynamics undergo in a network, one can also consider dynamical communities; i.e., a group of nodes displaying a similar dynamical process. We have investigated both analytically and numerically the development of dynamical community structure, where the community is referred to as a group of nodes synchronized i…
▽ More
Complex networks often possess communities defined based on network connectivity. When dynamics undergo in a network, one can also consider dynamical communities; i.e., a group of nodes displaying a similar dynamical process. We have investigated both analytically and numerically the development of dynamical community structure, where the community is referred to as a group of nodes synchronized in frequency, in networks of phase oscillators. We first demonstrate that using a few example networks, the community structure changes when network connectivity or interaction strength is varied. In particular, we found that community switching, i.e., a portion of oscillators change the group to which they synchronize, occurs for a range of parameters. We then propose a three-oscillator model: a bidirectional, weighted chain of three Kuramoto phase oscillators, as a theoretical framework for understanding the community formation and its variation. Our analysis demonstrates that the model shows a variety of partially synchronized patterns: oscillators with similar natural frequencies tend to synchronize for weak coupling, while tightly connected oscillators tend to synchronize for strong coupling. We obtain approximate expressions for the critical coupling strengths by employing a perturbative approach in a weak coupling regime and a geometric approach in a strong coupling regimes. Moreover, we elucidate the bifurcation types of transitions between different patterns. Our theory might be useful for understanding the development of partially synchronized patterns in a wider class of complex networks than community structured networks.
△ Less
Submitted 31 August, 2022; v1 submitted 22 August, 2022;
originally announced August 2022.
-
Sulfonylamide-Based Ionic Liquids for High-Voltage Potassium-Ion Batteries with Honeycomb Layered Cathode Oxides
Authors:
Kazuki Yoshii,
Titus Masese,
Minami Kato,
Keigo Kubota,
Hiroshi Senoh,
Masahiro Shikano
Abstract:
The world is at the cusp of a new era where pivotal importance is being attached to the development of sustainable and high-performance energy storage systems. Potassium-ion batteries are deemed not only as cheap battery candidates, but also as the penultimate high-voltage energy storage systems within the monovalent-cation chemistries. However, their performance and sustainability are undermined…
▽ More
The world is at the cusp of a new era where pivotal importance is being attached to the development of sustainable and high-performance energy storage systems. Potassium-ion batteries are deemed not only as cheap battery candidates, but also as the penultimate high-voltage energy storage systems within the monovalent-cation chemistries. However, their performance and sustainability are undermined by the lack of suitable electrolytes for high-voltage operation particularly due to the limited availability of cathode materials. Here, the potential of ionic liquids based on potassium bis(trifluoromethanesulfonyl)amide (KTFSA) as high-voltage electrolytes is presented by assessing their physicochemical properties, along with the electrochemical properties upon coupling with new high-voltage layered cathode materials. These ionic liquids demonstrate a lower redox potential for potassium dissolution / deposition (with a wide voltage tolerance of around $6.0$ $\rm V$), placing them as feasible and safe electrolytes for high-voltage potassium-ion battery configuration. This is proven by matching this electrolyte with new high-voltage layered cathode compositions, demonstrating stable electrochemical performance. The present findings of electrochemically stable ionic liquids based on potassium bis(trifluoromethanesulfonyl)amide will bolster further advancement of high-performance cathode materials, whose performance at high-voltage regimes were apparently restricted by the paucity of suitable and compatible electrolytes.
△ Less
Submitted 10 November, 2021; v1 submitted 6 November, 2021;
originally announced November 2021.
-
Large-field-of-view Chip-scale Talbot-grid-based Fluorescence Microscopy
Authors:
Shuo Pang,
Chao Han,
Mihoko Kato,
Paul W. Sternberg,
Changhuei Yang
Abstract:
The fluorescence microscope is one of the most important tools in modern clinical diagnosis and biological science. However, its expense, size and limited field-of-view (FOV) are becoming bottlenecks in key applications such as large-scale phenotyping and low-resource-setting diagnostics. Here we report a low-cost, compact chip-scale fluorescence-imaging platform, termed the Fluorescence Talbot Mi…
▽ More
The fluorescence microscope is one of the most important tools in modern clinical diagnosis and biological science. However, its expense, size and limited field-of-view (FOV) are becoming bottlenecks in key applications such as large-scale phenotyping and low-resource-setting diagnostics. Here we report a low-cost, compact chip-scale fluorescence-imaging platform, termed the Fluorescence Talbot Microscopy (FTM), which utilizes the Talbot self-imaging effect to enable efficient fluorescence imaging over a large and directly-scalable FOV. The FTM prototype has a resolution of 1.2 microns and an FOV of 3.9 mm x 3.5 mm. We demonstrate the imaging capability of FTM on fluorescently labeled breast cancer cells (SK-BR-3) and HEK cells expressing green fluorescent protein.
△ Less
Submitted 8 October, 2012;
originally announced October 2012.
-
On the Sensitivity of L/E Analysis of Super-Kamiokande Atmospheric Neutrino Data to Neutrino Oscillation Part~1
Authors:
E. Konishi,
Y. Minorikawa,
V. I. Galkin,
M. Ishiwata,
I. Nakamura,
N. Takahashi,
M. Kato,
A. Misaki
Abstract:
It is said that the finding of the maximum oscillation in neutrino oscillation by Super-Kamiokande is one of the major achievements of the SK. In present paper, we examine the assumption made by Super-Kamiokande Collaboration that the direction of the incident neutrino is approximately the same as that of the produced lepton, which is the cornerstone in their L/E analysis and we find this approxim…
▽ More
It is said that the finding of the maximum oscillation in neutrino oscillation by Super-Kamiokande is one of the major achievements of the SK. In present paper, we examine the assumption made by Super-Kamiokande Collaboration that the direction of the incident neutrino is approximately the same as that of the produced lepton, which is the cornerstone in their L/E analysis and we find this approximation does not hold even approximately. In the Part 2 of the subsequent paper, we apply the results from Figures 12, 13 and 14 to L/E analysis and conclude that one cannot obtain the maximum oscillation in L/E analysis which shows strongly the oscillation pattern from the neutrino oscillation.
△ Less
Submitted 22 July, 2010;
originally announced July 2010.
