Showing 1–13 of 13 results for author: Karmakar, A

Role of the Direct-to-Indirect Bandgap Crossover in the 'Reverse' Energy Transfer Process

Authors: Gayatri, Mehdi Arfaoui, Debashish Das, Tomasz Kazimierczuk, Natalia Zawadzka, Takashi Taniguchi, Kenji Watanabe, Adam Babinski, Saroj K. Nayak, Maciej R. Molas, Arka Karmakar

Abstract: Energy transfer (ET) is a dipole-dipole interaction, mediated by the virtual photon. Traditionally, ET happens from the higher (donor) to lower bandgap (acceptor) material. However, in some rare instances, a 'reverse' ET can happen from the lower-to-higher bandgap material depending on the strong overlap between the acceptor photoluminescence (PL) and the donor absorption spectra. In this work, we… ▽ More Energy transfer (ET) is a dipole-dipole interaction, mediated by the virtual photon. Traditionally, ET happens from the higher (donor) to lower bandgap (acceptor) material. However, in some rare instances, a 'reverse' ET can happen from the lower-to-higher bandgap material depending on the strong overlap between the acceptor photoluminescence (PL) and the donor absorption spectra. In this work, we report a reverse ET process from the lower bandgap MoS2 to higher bandgap WS2, due to the near 'resonant' overlap between the MoS2 B and WS2 A excitonic levels. Changing the MoS2 bandgap from direct-to-indirect by increasing the layer number results in a reduced ET rate, evident by the quenching of the WS2 PL emission. We also find that, at 300 K the estimated ET timescale of around 45 fs is faster than the reported thermalization of the MoS2 excitonic intervalley scattering (K+ to K-) time and comparable with the interlayer charge transfer time. △ Less

Submitted 17 April, 2025; originally announced April 2025.

In Vitro and In Silico Characterization of the Aggregation of Thrombi on Ventricular Assist Device Cannula

Authors: Wenxuan He, Abhishek Karmakar, Grant Rowlands, Samuel Schirmacher, Rodrigo Méndez-Rojano, James F. Antaki

Abstract: The unacceptably high stroke rate of HeartMate III VAD without signs of adherent pump thrombosis is hypothesized to be the result of the thrombi originating on the inflow cannula, ingesting and ejecting emboli from the VAD. Therefore, inflow cannula thrombosis has been an emerging focus. The inflow cannula of contemporary VADs, which incorporate both polished and rough regions serve as useful benc… ▽ More The unacceptably high stroke rate of HeartMate III VAD without signs of adherent pump thrombosis is hypothesized to be the result of the thrombi originating on the inflow cannula, ingesting and ejecting emboli from the VAD. Therefore, inflow cannula thrombosis has been an emerging focus. The inflow cannula of contemporary VADs, which incorporate both polished and rough regions serve as useful benchmarks to study the effects of roughness and shear on thrombogenesis. An in vitro study was conducted to emulate the micro-hemodynamic condition on a sintered inflow cannula, and to observe the deposition and detachment patterns. Together with a computational fluid dynamic tool, this study aimed to provide insight into the optimization of inflow cannula and potentially reducing adverse neurological events due to upstream thrombus. △ Less

Submitted 6 October, 2023; originally announced October 2023.

Development of Indigenous Pulse-Shape Discrimination Algorithm for Organic Scintillation detectors

Authors: Annesha Karmakar, G. Anil Kumar, Bhavika, V. Anand, Anikesh Pal

Abstract: The use of programmable hardware devices is imperative for digital based pulse shape discrimination (PSD) to differentiate between various types of radiation. This work reports the development of a PSD algorithm based on tail area and total area, eliminating the need for programmable hardware. The pulses were collected using BC501 detector and Pu-Be source from a digitizer in the oscilloscope mode… ▽ More The use of programmable hardware devices is imperative for digital based pulse shape discrimination (PSD) to differentiate between various types of radiation. This work reports the development of a PSD algorithm based on tail area and total area, eliminating the need for programmable hardware. The pulses were collected using BC501 detector and Pu-Be source from a digitizer in the oscilloscope mode. The algorithm performs crucial functions such as pulse normalization, shaping, identification and removal of multiple peaks and threshold determination. The algorithm provides neutron and gamma-ray counts, scatter plot, and FoM. In order to test the efficacy of our proposed algorithm, pulses were collected from a different source-detector setup comprising BC501A detector and an Am-Be source from a digitizer in the oscilloscope mode and Charge Integration (CI) mode. The results obtained from our proposed algorithm and CI method clearly indicates a good agreement in terms of number of neutrons and gamma-rays and Figure-of-Merit (FoM), thus providing cost-effective alternative method for neutron and gamma-ray discrimination, offering flexibility and accuracy without specialized hardware. △ Less

Submitted 20 July, 2023; originally announced July 2023.

Thickness Dependent Sensitivity of GAGG:Ce Scintillation detectors for Thermal Neutrons: GEANT4 Simulations and Experimental Measurements

Authors: Annesha Karmakar, G. Anil Kumar, Mohit Tyagi, Anikesh Pal

Abstract: In the present work, we report extensive GEANT4 simulations in order to study the dependence of sensitivity of GAGG:Ce scintillation crystal based detector on thickness of the crystal. All the simulations are made considering a thermalised Am-Be neutron source. The simulations are validated, qualitatively and quantitatively, by comparing the simulated energy spectra and sensitivity values with tho… ▽ More In the present work, we report extensive GEANT4 simulations in order to study the dependence of sensitivity of GAGG:Ce scintillation crystal based detector on thickness of the crystal. All the simulations are made considering a thermalised Am-Be neutron source. The simulations are validated, qualitatively and quantitatively, by comparing the simulated energy spectra and sensitivity values with those obtained from experimental measurements carried out using two different thicknesses of the crystal from our own experiment (0.5mm and 3mm) and validated with three other thicknesses (0.01mm, 0.1 mm and 1 mm) from literature. In this study, we define sensitivity of GAGG:Ce as the ratio of area under 77 keV sum peak to 45 keV peak. The present studies clearly confirm that, while it requires about 0.1 mm thickness for the GAGG:Ce crystal to fully absorb thermal neutrons, it requires about 3 mm to fully absorb the thermal neutron induced events. Further, we propose an equation, that can be used to estimate the thickness of the GAGG:Ce crystal directly from the observed sensitivity of the GAGG:Ce crystal. This equation could be very useful for the neutron imaging community for medical and space applications, as well as for manufactures of cameras meant for nuclear security purposes. △ Less

Submitted 19 June, 2023; originally announced June 2023.

Neutron-Gamma Pulse Shape Discrimination for Organic Scintillation Detector using 2D CNN based Image Classification

Authors: Annesha Karmakar, Anikesh Pal, G. Anil Kumar, Bhavika, V. Anand, Mohit Tyagi

Abstract: This study shows an implementation of neutron-gamma pulse shape discrimination (PSD) using a two-dimensional convolutional neural network. The inputs to the network are snapshots of the unprocessed, digitized signals from a BC501A detector. By exposing a BC501A detector to a Cf-252 source, neutron and gamma signals were collected to create a training dataset. The realistic datasets were created us… ▽ More This study shows an implementation of neutron-gamma pulse shape discrimination (PSD) using a two-dimensional convolutional neural network. The inputs to the network are snapshots of the unprocessed, digitized signals from a BC501A detector. By exposing a BC501A detector to a Cf-252 source, neutron and gamma signals were collected to create a training dataset. The realistic datasets were created using a data-driven approach for labeling the digitized signals, having classified snapshots of neutron and gamma pulses. Our algorithm was able to successfully differentiate neutrons and gammas with similar accuracy as the CI approach. Additionally, the independent dataset accuracy for our suggested 2D CNN-based PSD approach is 99%. In contrast to the traditional charge integration method, our suggested algorithm with data augmentation, is capable of extracting features from snapshots of the raw data based on the signal structures, making it computationally more efficient and also appropriate for other types of neutron detectors. △ Less

Submitted 10 June, 2023; originally announced June 2023.

Excitation-Dependent High-Lying Excitonic Exchange via Interlayer Energy Transfer from Lower-to-Higher Bandgap 2D Material

Authors: Arka Karmakar, Tomasz Kazimierczuk, Igor Antoniazzi, Mateusz Raczyński, Suji Park, Houk Jang, Takashi Taniguchi, Kenji Watanabe, Adam Babiński, Abdullah Al-Mahboob, Maciej R. Molas

Abstract: High light absorption (~15%) and strong photoluminescence (PL) emission in monolayer (1L) transition metal dichalcogenide (TMD) make it an ideal candidate for optoelectronic applications. Competing interlayer charge (CT) and energy transfer (ET) processes control the photocarrier relaxation pathways in TMD heterostructures (HSs). In TMDs, long-distance ET can survive up to several tens of nm, unli… ▽ More High light absorption (~15%) and strong photoluminescence (PL) emission in monolayer (1L) transition metal dichalcogenide (TMD) make it an ideal candidate for optoelectronic applications. Competing interlayer charge (CT) and energy transfer (ET) processes control the photocarrier relaxation pathways in TMD heterostructures (HSs). In TMDs, long-distance ET can survive up to several tens of nm, unlike the CT process. Our experiment shows that an efficient ET occurs from the 1Ls WSe2-to-MoS2 with an interlayer hBN, due to the resonant overlapping of the high-lying excitonic states between the two TMDs, resulting in enhanced HS MoS2 PL emission. This type of unconventional ET from the lower-to-higher optical bandgap material is not typical in the TMD HSs. With increasing temperature, the ET process becomes weaker due to the increased electron-phonon scattering, destroying the enhanced MoS2 emission. Our work provides new insight into the long-distance ET process and its effect on the photocarrier relaxation pathways. △ Less

Submitted 23 March, 2023; v1 submitted 13 January, 2023; originally announced January 2023.

Comments: 5 figures and SI included

Dominating Interlayer Resonant Energy Transfer in Type-II 2D Heterostructure

Authors: Arka Karmakar, Abdullah Al-Mahboob, Christopher E. Petoukhoff, Oksana Kravchyna, Nicholas S. Chan, Takashi Taniguchi, Kenji Watanabe, Keshav M. Dani

Abstract: Type-II heterostructures (HSs) are essential components of modern electronic and optoelectronic devices. Earlier studies have found that in type-II transition metal dichalcogenide (TMD) HSs, the dominating carrier relaxation pathway is the interlayer charge transfer (CT) mechanism. Here, this report shows that, in a type-II HS formed between monolayers of MoSe2 and ReS2, nonradiative energy transf… ▽ More Type-II heterostructures (HSs) are essential components of modern electronic and optoelectronic devices. Earlier studies have found that in type-II transition metal dichalcogenide (TMD) HSs, the dominating carrier relaxation pathway is the interlayer charge transfer (CT) mechanism. Here, this report shows that, in a type-II HS formed between monolayers of MoSe2 and ReS2, nonradiative energy transfer (ET) from higher to lower work function material (ReS2 to MoSe2) dominates over the traditional CT process with and without a charge-blocking interlayer. Without a charge-blocking interlayer, the HS area shows 3.6 times MoSe2 photoluminescence (PL) enhancement as compared to the MoSe2 area alone. After completely blocking the CT process, more than one order of magnitude higher MoSe2 PL emission was achieved from the HS area. This work reveals that the nature of this ET is truly a resonant effect by showing that in a similar type-II HS formed by ReS2 and WSe2, CT dominates over ET, resulting in a severely quenched WSe2 PL. This study not only provides significant insight into the competing interlayer processes, but also shows an innovative way to increase the PL quantum yield of the desired TMD material using ET process by carefully choosing the right material combination for HS. △ Less

Submitted 7 October, 2021; originally announced October 2021.

Moiré-localized interlayer exciton wavefunctions captured by imaging its electron and hole constituents

Authors: Ouri Karni, Elyse Barré, Vivek Pareek, Johnathan D. Georgaras, Michael K. L. Man, Chakradhar Sahoo, David R. Bacon, Xing Zhu, Henrique B. Ribeiro, Aidan L. O'Beirne, Jenny Hu, Abdullah Al-Mahboob, Mohamed M. M. Abdelrasoul, Nicholas S. Chan, Arka Karmakar, Andrew J. Winchester, Bumho Kim, Kenji Watanabe, Takashi Taniguchi, Katayun Barmak, Julien Madéo, Felipe H. da Jornada, Tony F. Heinz, Keshav M. Dani

Abstract: Interlayer excitons (ILXs) - electron-hole pairs bound across two atomically thin layered semiconductors - have emerged as attractive platforms to study exciton condensation, single-photon emission and other quantum-information applications. Yet, despite extensive optical spectroscopic investigations, critical information about their size, valley configuration and the influence of the moiré potent… ▽ More Interlayer excitons (ILXs) - electron-hole pairs bound across two atomically thin layered semiconductors - have emerged as attractive platforms to study exciton condensation, single-photon emission and other quantum-information applications. Yet, despite extensive optical spectroscopic investigations, critical information about their size, valley configuration and the influence of the moiré potential remains unknown. Here, we captured images of the time- and momentum-resolved distribution of both the electron and the hole that bind to form the ILX in a WSe2/MoS2 heterostructure. We thereby obtain a direct measurement of the interlayer exciton diameter of ~5.4 nm, comparable to the moiré unit-cell length of 6.1 nm. Surprisingly, this large ILX is well localized within the moiré cell to a region of only 1.8 nm - smaller than the size of the exciton itself. This high degree of localization of the interlayer exciton is backed by Bethe-Salpeter equation calculations and demonstrates that the ILX can be localized within small moiré unit cells. Unlike large moiré cells, these are uniform over large regions, thus allowing the formation of extended arrays of localized excitations for quantum technology. △ Less

Submitted 4 August, 2021; originally announced August 2021.

Comments: 4 figures

Extreme Scale-out SuperMUC Phase 2 - lessons learned

Authors: Nicolay Hammer, Ferdinand Jamitzky, Helmut Satzger, Momme Allalen, Alexander Block, Anupam Karmakar, Matthias Brehm, Reinhold Bader, Luigi Iapichino, Antonio Ragagnin, Vasilios Karakasis, Dieter Kranzlmüller, Arndt Bode, Herbert Huber, Martin Kühn, Rui Machado, Daniel Grünewald, Philipp V. F. Edelmann, Friedrich K. Röpke, Markus Wittmann, Thomas Zeiser, Gerhard Wellein, Gerald Mathias, Magnus Schwörer, Konstantin Lorenzen , et al. (14 additional authors not shown)

Abstract: In spring 2015, the Leibniz Supercomputing Centre (Leibniz-Rechenzentrum, LRZ), installed their new Peta-Scale System SuperMUC Phase2. Selected users were invited for a 28 day extreme scale-out block operation during which they were allowed to use the full system for their applications. The following projects participated in the extreme scale-out workshop: BQCD (Quantum Physics), SeisSol (Geophysi… ▽ More In spring 2015, the Leibniz Supercomputing Centre (Leibniz-Rechenzentrum, LRZ), installed their new Peta-Scale System SuperMUC Phase2. Selected users were invited for a 28 day extreme scale-out block operation during which they were allowed to use the full system for their applications. The following projects participated in the extreme scale-out workshop: BQCD (Quantum Physics), SeisSol (Geophysics, Seismics), GPI-2/GASPI (Toolkit for HPC), Seven-League Hydro (Astrophysics), ILBDC (Lattice Boltzmann CFD), Iphigenie (Molecular Dynamic), FLASH (Astrophysics), GADGET (Cosmological Dynamics), PSC (Plasma Physics), waLBerla (Lattice Boltzmann CFD), Musubi (Lattice Boltzmann CFD), Vertex3D (Stellar Astrophysics), CIAO (Combustion CFD), and LS1-Mardyn (Material Science). The projects were allowed to use the machine exclusively during the 28 day period, which corresponds to a total of 63.4 million core-hours, of which 43.8 million core-hours were used by the applications, resulting in a utilization of 69%. The top 3 users were using 15.2, 6.4, and 4.7 million core-hours, respectively. △ Less

Submitted 6 September, 2016; originally announced September 2016.

Comments: 10 pages, 5 figures, presented at ParCo2015 - Advances in Parallel Computing, held in Edinburgh, September 2015. The final publication is available at IOS Press through http://dx.doi.org/10.3233/978-1-61499-621-7-827

Journal ref: Advances in Parallel Computing, vol. 27: Parallel Computing: On the Road to Exascale, eds. G.R. Joubert et al., p. 827, 2016

Optimising PICCANTE - an Open Source Particle-in-Cell Code for Advanced Simulations on Tier-0 Systems

Authors: Andrea Sgattoni, Luca Fedeli, Stefano Sinigardi, Alberto Marocchino, Andrea Macchi, Volker Weinberg, Anupam Karmakar

Abstract: We present a detailed strong and weak scaling analysis of PICCANTE, an open source, massively parallel, fully-relativistic Particle-In-Cell (PIC) code. PIC codes are widely used in plasma physics and astrophysics to study the cases where kinetic effects are relevant. PICCANTE is primarily developed to study laser-plasma interaction. Within a PRACE Preparatory Access Project, various revisions of d… ▽ More We present a detailed strong and weak scaling analysis of PICCANTE, an open source, massively parallel, fully-relativistic Particle-In-Cell (PIC) code. PIC codes are widely used in plasma physics and astrophysics to study the cases where kinetic effects are relevant. PICCANTE is primarily developed to study laser-plasma interaction. Within a PRACE Preparatory Access Project, various revisions of different routines of the code have been analysed on the HPC systems JUQUEEN at Juelich Supercomputing Centre (JSC), Germany, and FERMI at CINECA, Italy, to improve scalability and I/O performance of the application. The diagnostic tool Scalasca is used to identify suboptimal routines. Different output strategies are discussed. The detailed strong and weak scaling behaviour of the improved code are presented in comparison with the original version of the code. △ Less

Submitted 26 March, 2015; v1 submitted 9 March, 2015; originally announced March 2015.

Comments: 8 pages, 6 figures, PRACE Whitepaper

Report number: WP209

Scalability of the plasma physics code GEM

Authors: Bruce D. Scott, Volker Weinberg, Olivier Hoenen, Anupam Karmakar, Luis Fazendeiro

Abstract: We discuss a detailed weak scaling analysis of GEM, a 3D MPI-parallelised gyrofluid code used in theoretical plasma physics at the Max Planck Institute of Plasma Physics, IPP at Garching b. München, Germany. Within a PRACE Preparatory Access Project various versions of the code have been analysed on the HPC systems SuperMUC at LRZ and JUQUEEN at Jülich Supercomputing Centre (JSC) to improve the pa… ▽ More We discuss a detailed weak scaling analysis of GEM, a 3D MPI-parallelised gyrofluid code used in theoretical plasma physics at the Max Planck Institute of Plasma Physics, IPP at Garching b. München, Germany. Within a PRACE Preparatory Access Project various versions of the code have been analysed on the HPC systems SuperMUC at LRZ and JUQUEEN at Jülich Supercomputing Centre (JSC) to improve the parallel scalability of the application. The diagnostic tool Scalasca has been used to filter out suboptimal routines. The code uses the electromagnetic gyrofluid model which is a superset of magnetohydrodynamic and drift-Alfvén microturbulance and also includes several relevant kinetic processes. GEM can be used with different geometries depending on the targeted use case, and has been proven to show good scalability when the computational domain is distributed amongst two dimensions. Such a distribution allows grids with sufficient size to describe small scale tokamak devices. In order to enable simulation of very large tokamaks (such as the next generation nuclear fusion device ITER in Cadarache, France) the third dimension has been parallelised and weak scaling has been achieved for significantly larger grids. △ Less

Submitted 12 February, 2014; v1 submitted 4 December, 2013; originally announced December 2013.

Comments: 9 pages, 6 figures, PRACE Whitepaper

Report number: WP125

Three dimensional filamentary structures of a relativistic electron beam in Fast Ignition plasmas

Authors: Anupam Karmakar, Naveen Kumar, Oleg Polomarov, Gennady Shvets, Alexander Pukhov

Abstract: The filamentary structures and associated electromagnetic fields of a relativistic electron beam have been studied by three dimensional particle-in-cell (PIC) simulations in the context of Fast Ignition fusion. The simulations explicitly include collisions in return plasma current and distinctly examine the effects of beam temperature and collisions on the growth of filamentary structures genera… ▽ More The filamentary structures and associated electromagnetic fields of a relativistic electron beam have been studied by three dimensional particle-in-cell (PIC) simulations in the context of Fast Ignition fusion. The simulations explicitly include collisions in return plasma current and distinctly examine the effects of beam temperature and collisions on the growth of filamentary structures generated. △ Less

Submitted 13 November, 2008; v1 submitted 23 September, 2008; originally announced September 2008.

Comments: 4 pages, 6 figures, submitted to Physics of Plasmas

On collisions driven negative energy waves and Weibel instability of a relativistic electron beam in a quasi-neutral plasma

Authors: Anupam Karmakar, Naveen Kumar, Gennady Shvets, Oleg Polomarov, Alexander Pukhov

Abstract: A new quasi-neutral model describing the Weibel instability of a high-current relativistic beam propagating through a resistive plasma is developed. It treats beam electrons as kinetic particles, and ambient plasma as a non-relativistic fluid. For a finite-temperature beam, a new class of negative energy magneto-sound waves is identified, which can possess negative energy. Their growth due to co… ▽ More A new quasi-neutral model describing the Weibel instability of a high-current relativistic beam propagating through a resistive plasma is developed. It treats beam electrons as kinetic particles, and ambient plasma as a non-relativistic fluid. For a finite-temperature beam, a new class of negative energy magneto-sound waves is identified, which can possess negative energy. Their growth due to collisional dissipation in the cold return current destabilizes the beam-plasma system even for high beam temperatures. We perform detailed two- and three-dimensional particle-in-cell (PIC) simulations of the thermal beam and collisional plasma. It is shown that in three dimensions, the Weibel instability persists even for physically collisionless background plasma. The anomalous plasma resistivity is then caused by the two-stream instability. △ Less

Submitted 2 September, 2008; v1 submitted 29 August, 2008; originally announced August 2008.

Comments: 5 pages, 3 figures