Showing 1–12 of 12 results for author: Kar, K

Atmospheric Changes During Natural Disaster: Case Study of a Dust Storm and a Volcanic Eruption Using Space and Ground Based Instruments

Authors: Deepak Kumar Kar, Chirag Mahida

Abstract: This study investigates atmospheric changes during natural disasters, focusing on case studies of a dust storm in Ahmedabad and a volcanic eruption at Moun Ruang. Using the MICROTOPS-II sunphotometer from May 15 to June 19, 2024, the Ozone column, water column height, and Aerosol Optical Thickness (AOT) were measured. Ozone levels followed a diurnal cycle, peaking in the afternoon due to vehicular… ▽ More This study investigates atmospheric changes during natural disasters, focusing on case studies of a dust storm in Ahmedabad and a volcanic eruption at Moun Ruang. Using the MICROTOPS-II sunphotometer from May 15 to June 19, 2024, the Ozone column, water column height, and Aerosol Optical Thickness (AOT) were measured. Ozone levels followed a diurnal cycle, peaking in the afternoon due to vehicular emissions and increased solar radiation, while water column depth rose with temperature, reflecting higher humidity and evaporation. AOT values increased due to boundary layer dynamics and urban emissions, peaking during rush hours and cloudy conditions. The dust storm in Ahmedabad on May 13, 2024, highlighted the influence of seasonal variations on dust storm frequency and their impact on atmospheric stability. Ceilometer backscatter data revealed significant boundary layer disruptions and enhanced aerosol mixing, with two obstruction layers identified at 100m and 2500m due to dust and clouds respectively. OMI-Aura satellite data showed a decrease in longwave radiation flux, aligning with observed cooling and increased humidity. The volcanic eruption at Mount Ruang on April 17, 2024, released substantial tephra and aerosols, enhancing cloud formation and decreasing surface temperature. Landsat-9 OLI-II data indicated significant changes in vegetation and cloud cover post-eruption, while OMI-Aura captured elevated SO2 levels as well as an 8.5% decrease in the ozone mixing ratio due to chlorine emissions. Our findings underscore the critical role of aerosols in climate modulation, acting as cloud condensation nuclei and influencing longwave radiation flux. △ Less

Submitted 5 May, 2025; originally announced May 2025.

Comments: Summer Internship Project Report

An Autoencoder-based Snow Drought Index

Authors: Sinan Rasiya Koya, Kanak Kanti Kar, Shivendra Srivastava, Tsegaye Tadesse, Mark Svoboda, Tirthankar Roy

Abstract: In several regions across the globe, snow has a significant impact on hydrology. The amounts of water that infiltrate the ground and flow as runoff are driven by the melting of snow. Therefore, it is crucial to study the magnitude and effect of snowmelt. Snow droughts, resulting from reduced snow storage, can drastically impact the water supplies in basins where snow predominates, such as in the w… ▽ More In several regions across the globe, snow has a significant impact on hydrology. The amounts of water that infiltrate the ground and flow as runoff are driven by the melting of snow. Therefore, it is crucial to study the magnitude and effect of snowmelt. Snow droughts, resulting from reduced snow storage, can drastically impact the water supplies in basins where snow predominates, such as in the western United States. Hence, it is important to detect the time and severity of snow droughts efficiently. We propose Snow Drought Response Index or SnoDRI, a novel indicator that could be used to identify and quantify snow drought occurrences. Our index is calculated using cutting-edge ML algorithms from various snow-related variables. The self-supervised learning of an autoencoder is combined with mutual information in the model. In this study, we use random forests for feature extraction for SnoDRI and assess the importance of each variable. We use reanalysis data (NLDAS-2) from 1981 to 2021 for the Pacific United States to study the efficacy of the new snow drought index. We evaluate the index by confirming the coincidence of its interpretation and the actual snow drought incidents. △ Less

Submitted 22 May, 2023; originally announced May 2023.

A Next-Generation Liquid Xenon Observatory for Dark Matter and Neutrino Physics

Authors: J. Aalbers, K. Abe, V. Aerne, F. Agostini, S. Ahmed Maouloud, D. S. Akerib, D. Yu. Akimov, J. Akshat, A. K. Al Musalhi, F. Alder, S. K. Alsum, L. Althueser, C. S. Amarasinghe, F. D. Amaro, A. Ames, T. J. Anderson, B. Andrieu, N. Angelides, E. Angelino, J. Angevaare, V. C. Antochi, D. Antón Martin, B. Antunovic, E. Aprile, H. M. Araújo , et al. (572 additional authors not shown)

Abstract: The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neut… ▽ More The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neutrinos through neutrinoless double-beta decay and through a variety of astrophysical sources. A next-generation xenon-based detector will therefore be a true multi-purpose observatory to significantly advance particle physics, nuclear physics, astrophysics, solar physics, and cosmology. This review article presents the science cases for such a detector. △ Less

Submitted 4 March, 2022; originally announced March 2022.

Comments: 77 pages, 40 figures, 1262 references

Report number: INT-PUB-22-003

Journal ref: J. Phys. G: Nucl. Part. Phys. 50 (2023) 013001

Simulation of Nuclear Recoils due to Supernova Neutrino-induced Neutrons in Liquid Xenon Detectors

Authors: Sayan Ghosh, Abhijit Bandyopadhyay, Pijushpani Bhattacharjee, Sovan Chakraborty, Kamales Kar, Satyajit Saha

Abstract: Neutrinos from supernova (SN) bursts can give rise to detectable number of nuclear recoil (NR) events through the coherent elastic neutrino-nucleus scattering (CE$ν$NS) process in large scale liquid xenon detectors designed for direct dark matter search, depending on the SN progenitor mass and distance. Here we show that in addition to the direct NR events due to CE$ν$NS process, the SN neutrinos… ▽ More Neutrinos from supernova (SN) bursts can give rise to detectable number of nuclear recoil (NR) events through the coherent elastic neutrino-nucleus scattering (CE$ν$NS) process in large scale liquid xenon detectors designed for direct dark matter search, depending on the SN progenitor mass and distance. Here we show that in addition to the direct NR events due to CE$ν$NS process, the SN neutrinos can give rise to additional nuclear recoils due to the elastic scattering of neutrons produced through inelastic interaction of the neutrinos with the xenon nuclei. We find that the contribution of the supernova neutrino-induced neutrons ($ν$I$n$) can significantly modify the total xenon NR spectrum at large recoil energies compared to that expected from the CE$ν$NS process alone. Moreover, for recoil energies $\gtrsim20$ keV, dominant contribution is obtained from the ($ν$I$n$) events. We numerically calculate the observable S1 and S2 signals due to both CE$ν$NS and $ν$I$n$ processes for a typical liquid xenon based detector, accounting for the multiple scattering effects of the neutrons in the case of $ν$I$n$, and find that sufficiently large signal events, those with S1$\gtrsim$50 photo-electrons (PE) and S2$\gtrsim$2300 PE, come mainly from the $ν$I$n$ scatterings. △ Less

Submitted 25 January, 2022; originally announced January 2022.

Comments: To be published in the Proceedings of TAUP2021. (Journal of Physics: Conference Series (JPCS)) (5 pages, 4 figures)

Liquid-phase reinforced Metal matrix (LMM) composite with non-intuitive properties

Authors: Varinder Pal, Rakesh Das, Rushikesh Ambekhar, Avinash Kumar, Jitesh Vasavada, Banty Kumar, Sujoy Kumar Kar, Suman Sarkar, Mithun Palit, Ajit K. Roy, Manas Paliwal, Krishanu Biswas, Sanjit Bhoumik, Sushil Mishra, Chirodeep Bakli, Chandra Shekhar Tiwary

Abstract: Over the ages, efforts have been made to use composite design to reinforce metals and alloys in order to increase their strength and modulus. On the other hand, nature herself improves the strength, ductility, stiffness and toughness of materials by strengthening them with liquids having zero strength/modulus. Here, emulating nature, efforts have been made to develop a new class of tin based alloy… ▽ More Over the ages, efforts have been made to use composite design to reinforce metals and alloys in order to increase their strength and modulus. On the other hand, nature herself improves the strength, ductility, stiffness and toughness of materials by strengthening them with liquids having zero strength/modulus. Here, emulating nature, efforts have been made to develop a new class of tin based alloy/composite with liquid metal reinforcement (LMM). Based on thermodynamic calculations, a composition has been designed such that on melting and casting it forms a solid metal (tin solid solution) and the eutectic mixture remains in liquid form at room temperature. The composite structure named as LMM shows multifold improvement in hardness, strength, ductility, toughness and wear resistance as compared to conventional solder alloys. A Finite Element Method (FEM) based simulation shows strain distribution in the composite which results in the unique behavior. The LMM also shows a negative coefficient of thermal expansion which is further verified using in-situ microscopy and thermodynamic calculations. △ Less

Submitted 8 February, 2020; originally announced February 2020.

Three-dimensional femtosecond laser nanolithography of crystals

Authors: Airan Rodenas, Min Gu, Giacomo Corrielli, Petra Paie, Sajeev John, Ajoy K. Kar, Roberto Osellame

Abstract: Nanostructuring hard optical crystals has so far been exclusively feasible at their surface, as stress induced crack formation and propagation has rendered high precision volume processes ineffective. We show that the inner chemical etching reactivity of a crystal can be enhanced at the nanoscale by more than five orders of magnitude by means of direct laser writing. The process allows to produce… ▽ More Nanostructuring hard optical crystals has so far been exclusively feasible at their surface, as stress induced crack formation and propagation has rendered high precision volume processes ineffective. We show that the inner chemical etching reactivity of a crystal can be enhanced at the nanoscale by more than five orders of magnitude by means of direct laser writing. The process allows to produce cm-scale arbitrary three-dimensional nanostructures with 100 nm feature sizes inside large crystals in absence of brittle fracture. To showcase the unique potential of the technique, we fabricate photonic structures such as sub-wavelength diffraction gratings and nanostructured optical waveguides capable of sustaining sub-wavelength propagating modes inside yttrium aluminum garnet crystals. This technique could enable the transfer of concepts from nanophotonics to the fields of solid state lasers and crystal optics. △ Less

Submitted 17 April, 2019; originally announced April 2019.

Comments: Submitted Manuscript and Supplementary Information

Journal ref: Nature Photonics 13, 105, 2019

Physics Potential of the ICAL detector at the India-based Neutrino Observatory (INO)

Authors: The ICAL Collaboration, Shakeel Ahmed, M. Sajjad Athar, Rashid Hasan, Mohammad Salim, S. K. Singh, S. S. R. Inbanathan, Venktesh Singh, V. S. Subrahmanyam, Shiba Prasad Behera, Vinay B. Chandratre, Nitali Dash, Vivek M. Datar, V. K. S. Kashyap, Ajit K. Mohanty, Lalit M. Pant, Animesh Chatterjee, Sandhya Choubey, Raj Gandhi, Anushree Ghosh, Deepak Tiwari, Ali Ajmi, S. Uma Sankar, Prafulla Behera, Aleena Chacko , et al. (67 additional authors not shown)

Abstract: The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separately over a wide range of energies and path lengths. The primary focus of this experiment is to explore the Earth matter effects by observing the energy and zenith angle dependence of the atmospheric neutrinos in the mul… ▽ More The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separately over a wide range of energies and path lengths. The primary focus of this experiment is to explore the Earth matter effects by observing the energy and zenith angle dependence of the atmospheric neutrinos in the multi-GeV range. This study will be crucial to address some of the outstanding issues in neutrino oscillation physics, including the fundamental issue of neutrino mass hierarchy. In this document, we present the physics potential of the detector as obtained from realistic detector simulations. We describe the simulation framework, the neutrino interactions in the detector, and the expected response of the detector to particles traversing it. The ICAL detector can determine the energy and direction of the muons to a high precision, and in addition, its sensitivity to multi-GeV hadrons increases its physics reach substantially. Its charge identification capability, and hence its ability to distinguish neutrinos from antineutrinos, makes it an efficient detector for determining the neutrino mass hierarchy. In this report, we outline the analyses carried out for the determination of neutrino mass hierarchy and precision measurements of atmospheric neutrino mixing parameters at ICAL, and give the expected physics reach of the detector with 10 years of runtime. We also explore the potential of ICAL for probing new physics scenarios like CPT violation and the presence of magnetic monopoles. △ Less

Submitted 9 May, 2017; v1 submitted 27 May, 2015; originally announced May 2015.

Comments: 139 pages, Physics White Paper of the ICAL (INO) Collaboration, Contents identical with the version published in Pramana - J. Physics

Report number: INO/ICAL/PHY/NOTE/2015-01

Journal ref: Pramana - J. Phys (2017) 88 : 79

1.5 GHz Pulse Generation From a Monolithic Waveguide Laser With a Graphene-Film Saturable Output Coupler

Authors: R. Mary, S. J. Beecher, G. Brown, F. Torrisi, S. Milana, D. Popa, T. Hasan, Z. Sun, E. Lidorikis, S. Ohara, A. C. Ferrari, A. K. Kar

Abstract: We fabricate a saturable absorber mirror by coating a graphene film on an output coupler mirror. This is then used to obtain Q-switched mode-locking from a diode pumped linear cavity waveguide laser inscribed in Ytterbium-doped Bismuthate Glass, with high slope and optical conversion efficiencies. The laser produces mode-locked pulses at 1039nm, with 1.5GHz repetition rate at an average 202mW outp… ▽ More We fabricate a saturable absorber mirror by coating a graphene film on an output coupler mirror. This is then used to obtain Q-switched mode-locking from a diode pumped linear cavity waveguide laser inscribed in Ytterbium-doped Bismuthate Glass, with high slope and optical conversion efficiencies. The laser produces mode-locked pulses at 1039nm, with 1.5GHz repetition rate at an average 202mW output power. This performance is due to the combination of the graphene saturable absorber with the high quality laser glass. △ Less

Submitted 14 December, 2012; originally announced December 2012.

Journal ref: Optics Express 21, 7943 (2013)

Advances in the Development of Mid-Infrared Integrated Devices for Interferometric Arrays

Authors: L. Labadie, Guillermo Martin, Airan Rodenas, Norman C. Anheier, Brahim Arezki, Robert R. Thomson, Hong A. Qiao, Pierre Kern, Ajoy K. Kar, Bruce E. Bernacki

Abstract: This article reports the advances on the development of mid-infrared integrated optics for stellar interferometry. The devices are fabricated by laser writing techniques on chalcogenide glasses. Laboratory characterizaton is reported and analyzed. This article reports the advances on the development of mid-infrared integrated optics for stellar interferometry. The devices are fabricated by laser writing techniques on chalcogenide glasses. Laboratory characterizaton is reported and analyzed. △ Less

Submitted 19 July, 2012; originally announced July 2012.

Comments: 12 pages, 9 figures, SPIE Astronomical Telescopes and Instrumentation

Three-Dimensional Mid-Infrared Photonics: Recent Progress in Ultrafast Laser Writing of Waveguides

Authors: Airan Rodenas, Robert R. Thomson, Guillermo Martin, Pierre Kern, Ajoy K. Kar

Abstract: We present here our recent progress in the three-dimensional (3D) direct laser writing (DLW) of step-index core waveguides inside diverse technologically relevant dielectric substrates, with specific emphasis on the demonstration of DLW mid-infrared waveguiding in the whole transparency range of these materials. We present here our recent progress in the three-dimensional (3D) direct laser writing (DLW) of step-index core waveguides inside diverse technologically relevant dielectric substrates, with specific emphasis on the demonstration of DLW mid-infrared waveguiding in the whole transparency range of these materials. △ Less

Submitted 7 June, 2012; originally announced June 2012.

Comments: 3 pages, 6 figures

Three-dimensional mid-infrared photonic circuits in chalcogenide glass

Authors: Airan Rodenas, Guillermo Martin, Brahim Arezki, Nicholas D. Psaila, Gin Jose, Animesh Jha, Lucas Labadie, Piern Kern, Ajoy K. Kar, Robert R. Thomson

Abstract: We report the fabrication of single mode buried channel waveguides for the whole mid-infrared transparency range of chalcogenide sulphide glasses by means of direct laser writing. We have explored the potential of this technology by fabricating a prototype three-dimensional three-beam combiner for future application in stellar interferometry, which delivers a monochromatic interference visibility… ▽ More We report the fabrication of single mode buried channel waveguides for the whole mid-infrared transparency range of chalcogenide sulphide glasses by means of direct laser writing. We have explored the potential of this technology by fabricating a prototype three-dimensional three-beam combiner for future application in stellar interferometry, which delivers a monochromatic interference visibility of 99.89% at 10.6 \mum, and an ultrahigh bandwidth (3-11 \mum) interference visibility of 21.3%. These results demonstrate that it is possible to harness the whole transparency range offered by chalcogenide glasses on a single on-chip instrument by means of direct laser writing, a finding that may be of key significance in future technologies such as astrophotonics and biochemical sensing. △ Less

Submitted 12 December, 2011; originally announced December 2011.

Comments: 3 pages, 4 figures, article submitted to Optics Letters on the 14th of November 2011

Exciton-photon coupling in a ZnSe based microcavity fabricated using epitaxial liftoff

Authors: A. Curran, J. K. Morrod, K. A. Prior, A. K. Kar, R. J. Warburton

Abstract: We report the observation of strong exciton-photon coupling in a ZnSe based microcavity fabricated using epitaxial liftoff. Molecular beam epitaxial grown ZnSe/Zn$_{0.9}$Cd$_{0.1}$Se quantum wells with a one wavelength optical length at the exciton emission were transferred to a SiO$_2$/Ta$_2$O$_5$ mirror with a reflectance of 96% to form finesse matched microcavities. Analysis of our angle reso… ▽ More We report the observation of strong exciton-photon coupling in a ZnSe based microcavity fabricated using epitaxial liftoff. Molecular beam epitaxial grown ZnSe/Zn$_{0.9}$Cd$_{0.1}$Se quantum wells with a one wavelength optical length at the exciton emission were transferred to a SiO$_2$/Ta$_2$O$_5$ mirror with a reflectance of 96% to form finesse matched microcavities. Analysis of our angle resolved transmission spectra reveals key features of the strong coupling regime: anticrossing with a normal mode splitting of $23.6 meV$ at $20 K$; composite evolution of the lower and upper polaritons; and narrowing of the lower polariton linewidth near resonance. The heavy hole exciton oscillator strength per quantum well is also deduced to be $1.78 \times 10^{13} cm^{-2}$. △ Less

Submitted 16 March, 2007; originally announced March 2007.

Comments: 3 pages, 3 figures