-
The Effect of short-range order on the viscosity and crystallization of Al-Mg melts
Authors:
Elizaveta A. Batalova,
Larisa V. Kamaeva,
Nikolay M. Chtchelkatchev
Abstract:
In this work, using the methods of viscosimetry and thermal analysis, the concentration changes in the values of the supercooling viscosity of Al-Mg melts with Mg content from 2.5 to 95 at.% are studied. It is shown that the temperature dependences of viscosity are well described by an exponential dependence. The concentration dependence of viscosity is not monotonous and reflects a change in the…
▽ More
In this work, using the methods of viscosimetry and thermal analysis, the concentration changes in the values of the supercooling viscosity of Al-Mg melts with Mg content from 2.5 to 95 at.% are studied. It is shown that the temperature dependences of viscosity are well described by an exponential dependence. The concentration dependence of viscosity is not monotonous and reflects a change in the chemical short-range order in the liquid phase. The concentration dependence of supercooling of Al-Mg melts is determined by the type of solid phase formed during solidification, and also reflects the most significant changes in the chemical short-range order in the liquid phase at 20 and 80 at.% Mg. Al-Mg alloys in the concentration ranges: 0-10, 40-50 and 90-100 at.% Mg are prone to non-equilibrium crystallization, the formation of quasi-eutectics and solidification without intermediate intermetallic phases.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Concentration behavior of liquidus temperatures and undercooling of Al-Cu-Co at normal pressure
Authors:
Larisa V. Kamaeva,
Elena N. Tsiok,
Nikolay M. Chtchelkatchev
Abstract:
Differential thermal analysis has been conducted for the Al-Cu-Co alloys with the composition range of 15 at.% Co and 10 to 30 at.% Cu, and 25 at.% Co and 2.5 to 20 at.% Co. The features of the formation of solid phases have been studied during the crystallization in a crucible in the conditions of slow cooling (rate of cooling to 1 K s-1) at normal pressure. On the state diagram of the Al-Cu-Co s…
▽ More
Differential thermal analysis has been conducted for the Al-Cu-Co alloys with the composition range of 15 at.% Co and 10 to 30 at.% Cu, and 25 at.% Co and 2.5 to 20 at.% Co. The features of the formation of solid phases have been studied during the crystallization in a crucible in the conditions of slow cooling (rate of cooling to 1 K s-1) at normal pressure. On the state diagram of the Al-Cu-Co system with 15 at.% Co and 25 at.% Cu the concentration sections have been built, which allows to determine the concentration ranges from which different phases are formed during the first stage of crystallization. Along the boundaries of different phase regions, extrema are observed on the liquidus line. The observed extrema on the liquidus lines and concentration dependences of undercooling are associated with change in the chemical short-range order at the considered concentrations both in the liquid and solid states.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Structure and solidification of the (Fe0.75B0.15Si0.1)100-xTax (x=0-2) melts: experiment and machine learning
Authors:
I. V. Sterkhova,
L. V. Kamaeva,
V. I. Ladyanov,
N. M. Chtchelkatchev
Abstract:
Fe-B-Si system is a matrix for synthesis of new functional materials with exceptional magnetic and mechanical properties. Progress in this area is associated with the search for optimal doping conditions. This theoretical and experimental study is aimed to address the influence of Ta alloying on the structure of undercooled (Fe0.75B0.15Si0.1)100-xTax (x=0-2) melts, their undercoolability and the p…
▽ More
Fe-B-Si system is a matrix for synthesis of new functional materials with exceptional magnetic and mechanical properties. Progress in this area is associated with the search for optimal doping conditions. This theoretical and experimental study is aimed to address the influence of Ta alloying on the structure of undercooled (Fe0.75B0.15Si0.1)100-xTax (x=0-2) melts, their undercoolability and the processes of structure formation during solidification. Small concentration of Ta complicates standard ab initio and machine learning investigations. We developed a technique for fast and stable training of machine learning interatomic potential (MLIP) in this case and uncovered the structure of the undercooled melts. Molecular dynamic simulations with MLIP showed that at Ta concentration of 1 at.% there is a sharp change in the chemical short-range ordering in the melt associated with a change in the interaction of Ta atoms. This effect leads to a restructuring of the cluster formation in the system. At the same time, our experimental investigation shows that melts with a Ta content of 1 at.% have the greatest tendency to undercoolability. Alloying with Ta promotes the formation of primary crystals of Fe2B, and at a concentration of more than 1.5 at.% Ta, also of FeTaB. Herewith, near 1 at.% Ta, the crystallization of the melt proceeds nontrivially: with the formation of two intermediate metastable phases Fe3B and Fe2Ta Laves phase. Also, the highest tendency to amorphization under conditions of quick quenching is exhibited by a melt with a Ta concentration of 1 at.%. The results not only provide understanding of optimal alloying of Fe-B-Si materials but also promote a machine learning method for numerical design of metallic alloys with a small dopant concentration.
△ Less
Submitted 7 November, 2022;
originally announced November 2022.
-
Al-Cu-Fe alloys: the relationship between the quasicrystal and its melt
Authors:
L. V. Kamaeva,
R. E. Ryltsev,
V. I. Lad'yanov,
N. M. Chtchelkatchev
Abstract:
Understanding the mechanisms which relate properties of liquid and solid phases is crucial for fabricating new advanced solid materials, such as glasses, quasicrystals and high-entropy alloys. Here we address this issue for quasicrystal-forming Al-Cu-Fe alloys which can serve as a model for studying microscopic mechanisms of quasicrystal formation. We study experimentally two structural-sensitive…
▽ More
Understanding the mechanisms which relate properties of liquid and solid phases is crucial for fabricating new advanced solid materials, such as glasses, quasicrystals and high-entropy alloys. Here we address this issue for quasicrystal-forming Al-Cu-Fe alloys which can serve as a model for studying microscopic mechanisms of quasicrystal formation. We study experimentally two structural-sensitive properties of the liquid -- viscosity and undercoolability -- and compare results with \textit{ab initio} investigations of short-range order (SRO). We observe that SRO in Al-Cu-Fe melts is polytetrahedral and mainly presented by distorted Kasper polyhedra. However, topologically perfect icosahedra are almost absent an even stoichiometry of icosahedral quasicrystal phase that suggests the topological structure of local polyhedra does not survive upon melting. It is shown that the main features of interatomic interaction in Al-Cu-Fe system, extracted from radial distribution function and bong-angle distribution function, are the same for both liquid and solid states. In particular, the system demonstrates pronounced repulsion between Fe and Cu as well as strong chemical interaction between Fe and Al, which are almost concentration-independent. We argue that SRO and structural-sensitive properties of a melt may serve as useful indicators of solid phase formation. In particular, in the concentration region corresponding to the composition of the icosahedral phase, a change in the chemical short-range order is observed, which leads to minima on the viscosity and udercoolability isotherms and has a noticeable effect on the initial stage of solidification.
△ Less
Submitted 11 August, 2019;
originally announced August 2019.
-
Phase selection and microstructure of slowly solidified Al-Cu-Fe alloys
Authors:
L. V. Kamaeva,
I. V. Sterkhova,
V. I. Ladyanov,
R. E. Ryltsev,
N. M. Chtchelkatchev
Abstract:
The search for effective methods to fabricate bulk single-phase quasicrystalline Al-Cu-Fe alloys is currently an important task. Crucial to solving this problem is to understand mechanisms of phase formation in this system. Here we study crystallization sequence during solidification as well as the conditions of solid phase formation in slowly solidified Al-Cu-Fe alloys in a wide range of composit…
▽ More
The search for effective methods to fabricate bulk single-phase quasicrystalline Al-Cu-Fe alloys is currently an important task. Crucial to solving this problem is to understand mechanisms of phase formation in this system. Here we study crystallization sequence during solidification as well as the conditions of solid phase formation in slowly solidified Al-Cu-Fe alloys in a wide range of compositions. Concentration dependencies of undercoolability were also constructed by differential thermal analysis method. These experimental results are compared with data on chemical short-range order in the liquid state determined from \textit{ab initio} molecular dynamic simulations. We observe that main features of interatomic interaction in the Al-Cu-Fe alloys are similar for both liquid and solid states and they change in the vicinity of i-phase composition. In the concentration region, where the i-phase forms from the melt, both the undercoolability and the crystallization character depend on the temperature of the melts before cooling.
△ Less
Submitted 17 June, 2019;
originally announced June 2019.
