-
Acceptance Tests of more than 10 000 Photomultiplier Tubes for the multi-PMT Digital Optical Modules of the IceCube Upgrade
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise,
C. Bellenghi
, et al. (399 additional authors not shown)
Abstract:
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities…
▽ More
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities can easily be adapted to other PMTs, such that they can, e.g., be re-used for testing the PMTs for IceCube-Gen2. Single photoelectron response, high voltage dependence, time resolution, prepulse, late pulse, afterpulse probabilities, and dark rates were measured for each PMT. We describe the design of the testing facilities, the testing procedures, and the results of the acceptance tests.
△ Less
Submitted 20 June, 2024; v1 submitted 30 April, 2024;
originally announced April 2024.
-
Improved modeling of in-ice particle showers for IceCube event reconstruction
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise
, et al. (394 additional authors not shown)
Abstract:
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstr…
▽ More
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstruction that better captures our current knowledge of ice optical properties. When evaluated on a Monte Carlo simulation set, the median angular resolution for in-ice particle showers improves by over a factor of three compared to a reconstruction based on a simplified model of the ice. The most substantial improvement is obtained when including effects of birefringence due to the polycrystalline structure of the ice. When evaluated on data classified as particle showers in the high-energy starting events sample, a significantly improved description of the events is observed.
△ Less
Submitted 22 April, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Measurement of Atmospheric Neutrino Mixing with Improved IceCube DeepCore Calibration and Data Processing
Authors:
IceCube Collaboration,
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker,
J. Becker Tjus,
J. Beise
, et al. (383 additional authors not shown)
Abstract:
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detai…
▽ More
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detail since our last study. By measuring the relative fluxes of neutrino flavors as a function of their reconstructed energies and arrival directions we constrain the atmospheric neutrino mixing parameters to be $\sin^2θ_{23} = 0.51\pm 0.05$ and $Δm^2_{32} = 2.41\pm0.07\times 10^{-3}\mathrm{eV}^2$, assuming a normal mass ordering. The resulting 40\% reduction in the error of both parameters with respect to our previous result makes this the most precise measurement of oscillation parameters using atmospheric neutrinos. Our results are also compatible and complementary to those obtained using neutrino beams from accelerators, which are obtained at lower neutrino energies and are subject to different sources of uncertainties.
△ Less
Submitted 8 August, 2023; v1 submitted 24 April, 2023;
originally announced April 2023.
-
Graph Neural Networks for Low-Energy Event Classification & Reconstruction in IceCube
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
N. Aggarwal,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
J. M. Alameddine,
A. A. Alves Jr.,
N. M. Amin,
K. Andeen,
T. Anderson,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker
, et al. (359 additional authors not shown)
Abstract:
IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challen…
▽ More
IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challenge due to the irregular detector geometry, inhomogeneous scattering and absorption of light in the ice and, below 100 GeV, the relatively low number of signal photons produced per event. To address this challenge, it is possible to represent IceCube events as point cloud graphs and use a Graph Neural Network (GNN) as the classification and reconstruction method. The GNN is capable of distinguishing neutrino events from cosmic-ray backgrounds, classifying different neutrino event types, and reconstructing the deposited energy, direction and interaction vertex. Based on simulation, we provide a comparison in the 1-100 GeV energy range to the current state-of-the-art maximum likelihood techniques used in current IceCube analyses, including the effects of known systematic uncertainties. For neutrino event classification, the GNN increases the signal efficiency by 18% at a fixed false positive rate (FPR), compared to current IceCube methods. Alternatively, the GNN offers a reduction of the FPR by over a factor 8 (to below half a percent) at a fixed signal efficiency. For the reconstruction of energy, direction, and interaction vertex, the resolution improves by an average of 13%-20% compared to current maximum likelihood techniques in the energy range of 1-30 GeV. The GNN, when run on a GPU, is capable of processing IceCube events at a rate nearly double of the median IceCube trigger rate of 2.7 kHz, which opens the possibility of using low energy neutrinos in online searches for transient events.
△ Less
Submitted 11 October, 2022; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Low Energy Event Reconstruction in IceCube DeepCore
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
J. M. Alameddine,
A. A. Alves Jr.,
N. M. Amin,
K. Andeen,
T. Anderson,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Axani,
X. Bai,
A. Balagopal V.,
S. W. Barwick,
B. Bastian,
V. Basu,
S. Baur,
R. Bay,
J. J. Beatty,
K. -H. Becker,
J. Becker Tjus
, et al. (360 additional authors not shown)
Abstract:
The reconstruction of event-level information, such as the direction or energy of a neutrino interacting in IceCube DeepCore, is a crucial ingredient to many physics analyses. Algorithms to extract this high level information from the detector's raw data have been successfully developed and used for high energy events. In this work, we address unique challenges associated with the reconstruction o…
▽ More
The reconstruction of event-level information, such as the direction or energy of a neutrino interacting in IceCube DeepCore, is a crucial ingredient to many physics analyses. Algorithms to extract this high level information from the detector's raw data have been successfully developed and used for high energy events. In this work, we address unique challenges associated with the reconstruction of lower energy events in the range of a few to hundreds of GeV and present two separate, state-of-the-art algorithms. One algorithm focuses on the fast directional reconstruction of events based on unscattered light. The second algorithm is a likelihood-based multipurpose reconstruction offering superior resolutions, at the expense of larger computational cost.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
The Wavelength-shifting Optical Module
Authors:
Benjamin Bastian-Querner,
Lucas S. Binn,
Sebastian Böser,
Jannes Brostean-Kaiser,
Dustin Hebecker,
Klaus Helbing,
Timo Karg,
Lutz Köpke,
Marek Kowalski,
Peter Peiffer,
Anna Pollmann,
John Rack-Helleis,
Martin Rongen,
Lea Schlickmann,
Florian Thomas,
Anna Vocke
Abstract:
The Wavelength-shifting Optical Module (WOM) is a novel photosensor concept for the instrumentation of large detector volumes with single-photon sensitivity. The key objective is to improve the signal-to-noise ratio which is achieved by decoupling the photosensitive area of a sensor from the cathode area of its photomultiplier tube (PMT).
The WOM consists of a transparent tube with two PMTs atta…
▽ More
The Wavelength-shifting Optical Module (WOM) is a novel photosensor concept for the instrumentation of large detector volumes with single-photon sensitivity. The key objective is to improve the signal-to-noise ratio which is achieved by decoupling the photosensitive area of a sensor from the cathode area of its photomultiplier tube (PMT).
The WOM consists of a transparent tube with two PMTs attached to its ends. The tube is coated with wavelength-shifting paint absorbing ultra-violet photons with nearly $100\,\%$ efficiency. Depending on the environment, e.g. air (ice), up to $73\,\%$ $(41\,\%)$ of the subsequently emitted optical photons can be captured by total internal reflection and propagate towards the PMTs where they are recorded.
The optical properties of the paint, the geometry of the tube and the coupling of the tube to the PMTs have been optimized for maximal sensitivity based on theoretical derivations and experimental evaluations. Prototypes were built to demonstrate the technique and to develop a reproducible construction process.
Important measurable characteristics of the WOM are the wavelength dependent effective area, the transit time spread of detected photons and the signal-to-noise ratio. The WOM outperforms bare PMTs especially with respect to the low signal-to-noise ratio with an increase of a factor up to 8.9 in air (5.2 in ice). Since the gain in sensitivity is mostly in the UV-regime, the WOM is an ideal sensor for Cherenkov and scintillation detectors.
△ Less
Submitted 9 February, 2022; v1 submitted 22 December, 2021;
originally announced December 2021.
-
LeptonInjector and LeptonWeighter: A neutrino event generator and weighter for neutrino observatories
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
C. Alispach,
A. A. Alves Jr.,
N. M. Amin,
R. An,
K. Andeen,
T. Anderson,
I. Ansseau,
G. Anton,
C. Argüelles,
S. Axani,
X. Bai,
A. Balagopal V.,
A. Barbano,
S. W. Barwick,
B. Bastian,
V. Basu,
V. Baum,
S. Baur,
R. Bay
, et al. (341 additional authors not shown)
Abstract:
We present a high-energy neutrino event generator, called LeptonInjector, alongside an event weighter, called LeptonWeighter. Both are designed for large-volume Cherenkov neutrino telescopes such as IceCube. The neutrino event generator allows for quick and flexible simulation of neutrino events within and around the detector volume, and implements the leading Standard Model neutrino interaction p…
▽ More
We present a high-energy neutrino event generator, called LeptonInjector, alongside an event weighter, called LeptonWeighter. Both are designed for large-volume Cherenkov neutrino telescopes such as IceCube. The neutrino event generator allows for quick and flexible simulation of neutrino events within and around the detector volume, and implements the leading Standard Model neutrino interaction processes relevant for neutrino observatories: neutrino-nucleon deep-inelastic scattering and neutrino-electron annihilation. In this paper, we discuss the event generation algorithm, the weighting algorithm, and the main functions of the publicly available code, with examples.
△ Less
Submitted 4 May, 2021; v1 submitted 18 December, 2020;
originally announced December 2020.
-
Combined sensitivity to the neutrino mass ordering with JUNO, the IceCube Upgrade, and PINGU
Authors:
IceCube-Gen2 Collaboration,
:,
M. G. Aartsen,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
C. Alispach,
K. Andeen,
T. Anderson,
I. Ansseau,
G. Anton,
C. Argüelles,
T. C. Arlen,
J. Auffenberg,
S. Axani,
P. Backes,
H. Bagherpour,
X. Bai,
A. Balagopal V.,
A. Barbano,
I. Bartos,
S. W. Barwick,
B. Bastian
, et al. (421 additional authors not shown)
Abstract:
The ordering of the neutrino mass eigenstates is one of the fundamental open questions in neutrino physics. While current-generation neutrino oscillation experiments are able to produce moderate indications on this ordering, upcoming experiments of the next generation aim to provide conclusive evidence. In this paper we study the combined performance of the two future multi-purpose neutrino oscill…
▽ More
The ordering of the neutrino mass eigenstates is one of the fundamental open questions in neutrino physics. While current-generation neutrino oscillation experiments are able to produce moderate indications on this ordering, upcoming experiments of the next generation aim to provide conclusive evidence. In this paper we study the combined performance of the two future multi-purpose neutrino oscillation experiments JUNO and the IceCube Upgrade, which employ two very distinct and complementary routes towards the neutrino mass ordering. The approach pursued by the $20\,\mathrm{kt}$ medium-baseline reactor neutrino experiment JUNO consists of a careful investigation of the energy spectrum of oscillated $\barν_e$ produced by ten nuclear reactor cores. The IceCube Upgrade, on the other hand, which consists of seven additional densely instrumented strings deployed in the center of IceCube DeepCore, will observe large numbers of atmospheric neutrinos that have undergone oscillations affected by Earth matter. In a joint fit with both approaches, tension occurs between their preferred mass-squared differences $ Δm_{31}^{2}=m_{3}^{2}-m_{1}^{2} $ within the wrong mass ordering. In the case of JUNO and the IceCube Upgrade, this allows to exclude the wrong ordering at $>5σ$ on a timescale of 3--7 years --- even under circumstances that are unfavorable to the experiments' individual sensitivities. For PINGU, a 26-string detector array designed as a potential low-energy extension to IceCube, the inverted ordering could be excluded within 1.5 years (3 years for the normal ordering) in a joint analysis.
△ Less
Submitted 15 November, 2019;
originally announced November 2019.
-
Computational Techniques for the Analysis of Small Signals in High-Statistics Neutrino Oscillation Experiments
Authors:
IceCube Collaboration,
M. G. Aartsen,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
I. Al Samarai,
D. Altmann,
K. Andeen,
T. Anderson,
I. Ansseau,
G. Anton,
C. Argüelles,
T. C. Arlen,
J. Auffenberg,
S. Axani,
H. Bagherpour,
X. Bai,
A. Balagopal V.,
J. P. Barron,
I. Bartos,
S. W. Barwick,
V. Baum,
R. Bay
, et al. (347 additional authors not shown)
Abstract:
The current and upcoming generation of Very Large Volume Neutrino Telescopes---collecting unprecedented quantities of neutrino events---can be used to explore subtle effects in oscillation physics, such as (but not restricted to) the neutrino mass ordering. The sensitivity of an experiment to these effects can be estimated from Monte Carlo simulations. With the high number of events that will be c…
▽ More
The current and upcoming generation of Very Large Volume Neutrino Telescopes---collecting unprecedented quantities of neutrino events---can be used to explore subtle effects in oscillation physics, such as (but not restricted to) the neutrino mass ordering. The sensitivity of an experiment to these effects can be estimated from Monte Carlo simulations. With the high number of events that will be collected, there is a trade-off between the computational expense of running such simulations and the inherent statistical uncertainty in the determined values. In such a scenario, it becomes impractical to produce and use adequately-sized sets of simulated events with traditional methods, such as Monte Carlo weighting. In this work we present a staged approach to the generation of binned event distributions in order to overcome these challenges. By combining multiple integration and smoothing techniques which address limited statistics from simulation it arrives at reliable analysis results using modest computational resources.
△ Less
Submitted 4 December, 2019; v1 submitted 14 March, 2018;
originally announced March 2018.
-
Improved Detection of Supernovae with the IceCube Observatory
Authors:
Lutz Köpke
Abstract:
The IceCube neutrino telescope monitors one cubic kilometer of deep Antarctic ice by detecting Cherenkov photons emitted from charged secondaries produced when neutrinos interact in the ice. The geometry of the detector, which comprises a lattice of 5160 photomultipliers, is optimized for the detection of neutrinos above 100 GeV. However, at subfreezing ice temperatures, dark noise rates are low e…
▽ More
The IceCube neutrino telescope monitors one cubic kilometer of deep Antarctic ice by detecting Cherenkov photons emitted from charged secondaries produced when neutrinos interact in the ice. The geometry of the detector, which comprises a lattice of 5160 photomultipliers, is optimized for the detection of neutrinos above 100 GeV. However, at subfreezing ice temperatures, dark noise rates are low enough that a high flux of MeV neutrinos streaming through the detector may be recognized by a collective rate enhancement in all photomultipliers. This method can be used to search for the signal of core collapse supernovae, providing sensitivity competitive to Mton neutrino detectors to a supernova in our Galaxy. An online data acquisition system dedicated to supernova detection has been running for several years, but its shortcomings include limited sampling frequency and the fact that the burst energy and direction cannot be reconstructed. A recently developed offline data acquisition system allows IceCube to buffer all registered photons in the detector in case of an alert with low probability to be erroneous. By analyzing such data offline, a precision determination of the burst onset time and the characteristics of rapidly varying fluxes, as well as estimates of the average neutrino energies may be obtained. For supernovae ending in a black hole, the IceCube data can also be used to determine the direction of the burst.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
The IceCube Neutrino Observatory: Instrumentation and Online Systems
Authors:
IceCube Collaboration,
M. G. Aartsen,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
D. Altmann,
K. Andeen,
T. Anderson,
I. Ansseau,
G. Anton,
M. Archinger,
C. Argüelles,
R. Auer,
J. Auffenberg,
S. Axani,
J. Baccus,
X. Bai,
S. Barnet,
S. W. Barwick,
V. Baum,
R. Bay,
K. Beattie,
J. J. Beatty
, et al. (328 additional authors not shown)
Abstract:
The IceCube Neutrino Observatory is a cubic-kilometer-scale high-energy neutrino detector built into the ice at the South Pole. Construction of IceCube, the largest neutrino detector built to date, was completed in 2011 and enabled the discovery of high-energy astrophysical neutrinos. We describe here the design, production, and calibration of the IceCube digital optical module (DOM), the cable sy…
▽ More
The IceCube Neutrino Observatory is a cubic-kilometer-scale high-energy neutrino detector built into the ice at the South Pole. Construction of IceCube, the largest neutrino detector built to date, was completed in 2011 and enabled the discovery of high-energy astrophysical neutrinos. We describe here the design, production, and calibration of the IceCube digital optical module (DOM), the cable systems, computing hardware, and our methodology for drilling and deployment. We also describe the online triggering and data filtering systems that select candidate neutrino and cosmic ray events for analysis. Due to a rigorous pre-deployment protocol, 98.4% of the DOMs in the deep ice are operating and collecting data. IceCube routinely achieves a detector uptime of 99% by emphasizing software stability and monitoring. Detector operations have been stable since construction was completed, and the detector is expected to operate at least until the end of the next decade.
△ Less
Submitted 6 February, 2024; v1 submitted 15 December, 2016;
originally announced December 2016.
-
Very High-Energy Gamma-Ray Follow-Up Program Using Neutrino Triggers from IceCube
Authors:
IceCube Collaboration,
M. G. Aartsen,
K. Abraham,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
D. Altmann,
K. Andeen,
T. Anderson,
I. Ansseau,
G. Anton,
M. Archinger,
C. Arguelles,
J. Auffenberg,
S. Axani,
X. Bai,
S. W. Barwick,
V. Baum,
R. Bay,
J. J. Beatty,
J. Becker-Tjus,
K. -H. Becker,
S. BenZvi
, et al. (519 additional authors not shown)
Abstract:
We describe and report the status of a neutrino-triggered program in IceCube that generates real-time alerts for gamma-ray follow-up observations by atmospheric-Cherenkov telescopes (MAGIC and VERITAS). While IceCube is capable of monitoring the whole sky continuously, high-energy gamma-ray telescopes have restricted fields of view and in general are unlikely to be observing a potential neutrino-f…
▽ More
We describe and report the status of a neutrino-triggered program in IceCube that generates real-time alerts for gamma-ray follow-up observations by atmospheric-Cherenkov telescopes (MAGIC and VERITAS). While IceCube is capable of monitoring the whole sky continuously, high-energy gamma-ray telescopes have restricted fields of view and in general are unlikely to be observing a potential neutrino-flaring source at the time such neutrinos are recorded. The use of neutrino-triggered alerts thus aims at increasing the availability of simultaneous multi-messenger data during potential neutrino flaring activity, which can increase the discovery potential and constrain the phenomenological interpretation of the high-energy emission of selected source classes (e.g. blazars). The requirements of a fast and stable online analysis of potential neutrino signals and its operation are presented, along with first results of the program operating between 14 March 2012 and 31 December 2015.
△ Less
Submitted 12 November, 2016; v1 submitted 6 October, 2016;
originally announced October 2016.
-
IceCube-Gen2 - The Next Generation Neutrino Observatory at the South Pole: Contributions to ICRC 2015
Authors:
The IceCube-Gen2 Collaboration,
:,
M. G. Aartsen,
K. Abraham,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
D. Altmann,
T. Anderson,
I. Ansseau,
G. Anton,
M. Archinger,
C. Arguelles,
T. C. Arlen,
J. Auffenberg,
S. Axani,
X. Bai,
I. Bartos,
S. W. Barwick,
V. Baum,
R. Bay,
J. J. Beatty,
J. Becker Tjus
, et al. (316 additional authors not shown)
Abstract:
Papers submitted to the 34th International Cosmic Ray Conference (ICRC 2015, The Hague) by the IceCube-Gen2 Collaboration.
Papers submitted to the 34th International Cosmic Ray Conference (ICRC 2015, The Hague) by the IceCube-Gen2 Collaboration.
△ Less
Submitted 9 November, 2015; v1 submitted 18 October, 2015;
originally announced October 2015.
-
Determining neutrino oscillation parameters from atmospheric muon neutrino disappearance with three years of IceCube DeepCore data
Authors:
IceCube Collaboration,
M. G. Aartsen,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
D. Altmann,
T. Anderson,
C. Arguelles,
T. C. Arlen,
J. Auffenberg,
X. Bai,
S. W. Barwick,
V. Baum,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
K. -H. Becker,
S. BenZvi,
P. Berghaus,
D. Berley,
E. Bernardini,
A. Bernhard,
D. Z. Besson
, et al. (279 additional authors not shown)
Abstract:
We present a measurement of neutrino oscillations via atmospheric muon neutrino disappearance with three years of data of the completed IceCube neutrino detector. DeepCore, a region of denser instrumentation, enables the detection and reconstruction of atmospheric muon neutrinos between 10 GeV and 100 GeV, where a strong disappearance signal is expected. The detector volume surrounding DeepCore is…
▽ More
We present a measurement of neutrino oscillations via atmospheric muon neutrino disappearance with three years of data of the completed IceCube neutrino detector. DeepCore, a region of denser instrumentation, enables the detection and reconstruction of atmospheric muon neutrinos between 10 GeV and 100 GeV, where a strong disappearance signal is expected. The detector volume surrounding DeepCore is used as a veto region to suppress the atmospheric muon background. Neutrino events are selected where the detected Cherenkov photons of the secondary particles minimally scatter, and the neutrino energy and arrival direction are reconstructed. Both variables are used to obtain the neutrino oscillation parameters from the data, with the best fit given by $Δm^2_{32}=2.72^{+0.19}_{-0.20}\times 10^{-3}\,\mathrm{eV}^2$ and $\sin^2θ_{23} = 0.53^{+0.09}_{-0.12}$ (normal mass hierarchy assumed). The results are compatible and comparable in precision to those of dedicated oscillation experiments.
△ Less
Submitted 13 April, 2015; v1 submitted 27 October, 2014;
originally announced October 2014.
-
Energy Reconstruction Methods in the IceCube Neutrino Telescope
Authors:
IceCube Collaboration,
M. G. Aartsen,
R. Abbasi,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
D. Altmann,
C. Arguelles,
J. Auffenberg,
X. Bai,
M. Baker,
S. W. Barwick,
V. Baum,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
K. -H. Becker,
S. BenZvi,
P. Berghaus,
D. Berley,
E. Bernardini,
A. Bernhard,
D. Z. Besson,
G. Binder
, et al. (263 additional authors not shown)
Abstract:
Accurate measurement of neutrino energies is essential to many of the scientific goals of large-volume neutrino telescopes. The fundamental observable in such detectors is the Cherenkov light produced by the transit through a medium of charged particles created in neutrino interactions. The amount of light emitted is proportional to the deposited energy, which is approximately equal to the neutrin…
▽ More
Accurate measurement of neutrino energies is essential to many of the scientific goals of large-volume neutrino telescopes. The fundamental observable in such detectors is the Cherenkov light produced by the transit through a medium of charged particles created in neutrino interactions. The amount of light emitted is proportional to the deposited energy, which is approximately equal to the neutrino energy for $ν_e$ and $ν_μ$ charged-current interactions and can be used to set a lower bound on neutrino energies and to measure neutrino spectra statistically in other channels. Here we describe methods and performance of reconstructing charged-particle energies and topologies from the observed Cherenkov light yield, including techniques to measure the energies of uncontained muon tracks, achieving average uncertainties in electromagnetic-equivalent deposited energy of $\sim 15\%$ above 10 TeV.
△ Less
Submitted 10 February, 2014; v1 submitted 19 November, 2013;
originally announced November 2013.
-
A large-area single photon sensor employing wavelength-shifting and light-guiding technology
Authors:
Lukas Schulte,
Markus Voge,
Akos Hoffmann,
Sebastian Böser,
Lutz Köpke,
Marek Kowalski
Abstract:
Large-scale underground water-Cherenkov neutrino observatories rely on single photon sensors whose sensitive area for Cherenkov photons one wants to maximise. Low dark noise rates and dense module spacing will thereby allow to substantially decrease the energy threshold in future projects. We describe a feasibility study of a novel type of single photon sensor that employs organic wavelength-shift…
▽ More
Large-scale underground water-Cherenkov neutrino observatories rely on single photon sensors whose sensitive area for Cherenkov photons one wants to maximise. Low dark noise rates and dense module spacing will thereby allow to substantially decrease the energy threshold in future projects. We describe a feasibility study of a novel type of single photon sensor that employs organic wavelength-shifting material (WLS) to capture Cherenkov photons and guide them to a PMT readout. Different WLS materials have been tested in lab measurements as candidates for use in such a sensor and photon capture efficiencies as high as 50 % have been achieved. Based on these findings we estimate that the effective photosensitive area of a prototype built with existing technology can easily exceed that of modules currently used e. g. in IceCube. Additionally, the dark noise rate of such a module can be exceptionally low in the order of 10 Hz. This is of special importance when targeting low-energy neutrinos that yield only few photons that need to be distinguished from noise hits.
△ Less
Submitted 25 July, 2013;
originally announced July 2013.
-
Measurement of South Pole ice transparency with the IceCube LED calibration system
Authors:
IceCube Collaboration,
M. G. Aartsen,
R. Abbasi,
Y. Abdou,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
D. Altmann,
J. Auffenberg,
X. Bai,
M. Baker,
S. W. Barwick,
V. Baum,
R. Bay,
J. J. Beatty,
S. Bechet,
J. Becker Tjus,
K. -H. Becker,
M. Bell,
M. L. Benabderrahmane,
S. BenZvi,
J. Berdermann,
P. Berghaus,
D. Berley
, et al. (250 additional authors not shown)
Abstract:
The IceCube Neutrino Observatory, approximately 1 km^3 in size, is now complete with 86 strings deployed in the Antarctic ice. IceCube detects the Cherenkov radiation emitted by charged particles passing through or created in the ice. To realize the full potential of the detector, the properties of light propagation in the ice in and around the detector must be well understood. This report present…
▽ More
The IceCube Neutrino Observatory, approximately 1 km^3 in size, is now complete with 86 strings deployed in the Antarctic ice. IceCube detects the Cherenkov radiation emitted by charged particles passing through or created in the ice. To realize the full potential of the detector, the properties of light propagation in the ice in and around the detector must be well understood. This report presents a new method of fitting the model of light propagation in the ice to a data set of in-situ light source events collected with IceCube. The resulting set of derived parameters, namely the measured values of scattering and absorption coefficients vs. depth, is presented and a comparison of IceCube data with simulations based on the new model is shown.
△ Less
Submitted 22 January, 2013;
originally announced January 2013.
-
An improved method for measuring muon energy using the truncated mean of dE/dx
Authors:
IceCube collaboration,
R. Abbasi,
Y. Abdou,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
D. Altmann,
K. Andeen,
J. Auffenberg,
X. Bai,
M. Baker,
S. W. Barwick,
V. Baum,
R. Bay,
K. Beattie,
J. J. Beatty,
S. Bechet,
J. Becker Tjus,
K. -H. Becker,
M. Bell,
M. L. Benabderrahmane,
S. BenZvi,
J. Berdermann,
P. Berghaus
, et al. (255 additional authors not shown)
Abstract:
The measurement of muon energy is critical for many analyses in large Cherenkov detectors, particularly those that involve separating extraterrestrial neutrinos from the atmospheric neutrino background. Muon energy has traditionally been determined by measuring the specific energy loss (dE/dx) along the muon's path and relating the dE/dx to the muon energy. Because high-energy muons (E_mu > 1 TeV)…
▽ More
The measurement of muon energy is critical for many analyses in large Cherenkov detectors, particularly those that involve separating extraterrestrial neutrinos from the atmospheric neutrino background. Muon energy has traditionally been determined by measuring the specific energy loss (dE/dx) along the muon's path and relating the dE/dx to the muon energy. Because high-energy muons (E_mu > 1 TeV) lose energy randomly, the spread in dE/dx values is quite large, leading to a typical energy resolution of 0.29 in log10(E_mu) for a muon observed over a 1 km path length in the IceCube detector. In this paper, we present an improved method that uses a truncated mean and other techniques to determine the muon energy. The muon track is divided into separate segments with individual dE/dx values. The elimination of segments with the highest dE/dx results in an overall dE/dx that is more closely correlated to the muon energy. This method results in an energy resolution of 0.22 in log10(E_mu), which gives a 26% improvement. This technique is applicable to any large water or ice detector and potentially to large scintillator or liquid argon detectors.
△ Less
Submitted 9 November, 2012; v1 submitted 16 August, 2012;
originally announced August 2012.
-
Use of event-level neutrino telescope data in global fits for theories of new physics
Authors:
P. Scott,
C. Savage,
J. Edsjö,
the IceCube Collaboration,
:,
R. Abbasi,
Y. Abdou,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
D. Altmann,
K. Andeen,
J. Auffenberg,
X. Bai,
M. Baker,
S. W. Barwick,
V. Baum,
R. Bay,
K. Beattie,
J. J. Beatty,
S. Bechet,
J. Becker Tjus,
K. -H. Becker,
M. Bell
, et al. (253 additional authors not shown)
Abstract:
We present a fast likelihood method for including event-level neutrino telescope data in parameter explorations of theories for new physics, and announce its public release as part of DarkSUSY 5.0.6. Our construction includes both angular and spectral information about neutrino events, as well as their total number. We also present a corresponding measure for simple model exclusion, which can be u…
▽ More
We present a fast likelihood method for including event-level neutrino telescope data in parameter explorations of theories for new physics, and announce its public release as part of DarkSUSY 5.0.6. Our construction includes both angular and spectral information about neutrino events, as well as their total number. We also present a corresponding measure for simple model exclusion, which can be used for single models without reference to the rest of a parameter space. We perform a number of supersymmetric parameter scans with IceCube data to illustrate the utility of the method: example global fits and a signal recovery in the constrained minimal supersymmetric standard model (CMSSM), and a model exclusion exercise in a 7-parameter phenomenological version of the MSSM. The final IceCube detector configuration will probe almost the entire focus-point region of the CMSSM, as well as a number of MSSM-7 models that will not otherwise be accessible to e.g. direct detection. Our method accurately recovers the mock signal, and provides tight constraints on model parameters and derived quantities. We show that the inclusion of spectral information significantly improves the accuracy of the recovery, providing motivation for its use in future IceCube analyses.
△ Less
Submitted 1 October, 2012; v1 submitted 3 July, 2012;
originally announced July 2012.
-
Hadronic Calibration of the ATLAS Liquid Argon End-Cap Calorimeter in the Pseudorapidity Region 1.6 < |eta| < 1.8 in Beam Tests
Authors:
C. Cojocaru,
J. Pinfold,
J. Soukup,
M. Vincter,
V. Datskov,
A. Fedorov,
S. Golubykh,
N. Javadov,
V. Kalinnikov,
S. Kakurin,
M. Kazarinov,
V. Kukhtin,
E. Ladygin,
A. Lazarev,
A. Neganov,
I. Pisarev,
N. Rousakovitch,
E. Serochkin,
S. Shilov,
A. Shalyugin,
Yu. Usov,
D. Bruncko,
R. Chytracek,
E. Kladiva,
P. Strizenec
, et al. (91 additional authors not shown)
Abstract:
A full azimuthal phi-wedge of the ATLAS liquid argon end-cap calorimeter has been exposed to beams of electrons, muons and pions in the energy range 6 GeV <= E <= 200 GeV at the CERN SPS. The angular region studied corresponds to the ATLAS impact position around the pseudorapidity interval 1.6 < |eta| < 1.8. The beam test set-up is described. A detailed study of the performance is given as well…
▽ More
A full azimuthal phi-wedge of the ATLAS liquid argon end-cap calorimeter has been exposed to beams of electrons, muons and pions in the energy range 6 GeV <= E <= 200 GeV at the CERN SPS. The angular region studied corresponds to the ATLAS impact position around the pseudorapidity interval 1.6 < |eta| < 1.8. The beam test set-up is described. A detailed study of the performance is given as well as the related intercalibration constants obtained. Following the ATLAS hadronic calibration proposal, a first study of the hadron calibration using a weighting ansatz is presented. The results are compared to predictions from Monte Carlo simulations, based on GEANT 3 and GEANT 4 models.
△ Less
Submitted 2 July, 2004;
originally announced July 2004.
