Showing 1–6 of 6 results for author: Joodaki, M

Strain-Induced Optical and Molecular Transformations in PET Films for Organic Electronic Applications

Authors: Mahya Ghorab, Ayush K. Ranga, Patrice Donfack, Arnulf Materny, Veit Wagner, Mojtaba Joodaki

Abstract: Poly(ethylene terephthalate) (PET) films are widely used in flexible electronics and optoelectronics, where their mechanical durability and optical performance under strain are essential for device reliability. This study investigates the impact of applied mechanical strain on the optical and molecular properties of PET at room temperature,using UV-Vis absorption and Raman spectroscopy. The work e… ▽ More Poly(ethylene terephthalate) (PET) films are widely used in flexible electronics and optoelectronics, where their mechanical durability and optical performance under strain are essential for device reliability. This study investigates the impact of applied mechanical strain on the optical and molecular properties of PET at room temperature,using UV-Vis absorption and Raman spectroscopy. The work explores how varying strain levels, from 0% (unstretched) to 30%, affect the transparency, vibrational modes, and molecular reorganization within PET films. UV-Vis absorbance measurements reveal that strain induces significant changes in the light transmission properties of PET, particularly in the visible range, and increases absorption in the UVA and visible region by up to 100%. Raman spectra indicate that strain levels higher than 5% lead to irreversible shifts of vibrational lines, accompanied by an increase of their full width at half maximum (FWHM), suggesting molecular reorientation and crystallinity changes. The phonon mode coupled with C-O stretching [O-CH2] shows the strongest response to applied mechanical stress. This study provides a comprehensive understanding of strain-induced optical and structural alterations in PET, with implications for improving the mechanical and optical performance of PET-based devices in strainsensitive applications, such as organic solar cells (OSCs), organic light-emitting diodes (OLEDs), and flexible sensors. △ Less

Submitted 14 February, 2025; originally announced February 2025.

Analysis, Design, and Fabrication of a High-Gain Low-Profile Metasurface Antenna Using Direct Feeding of Sievenpiper s HIS

Authors: Alireza Ghaneizadeh, Soeren F. Peik, Martin Schneider, Mojtaba Joodaki

Abstract: HISs have recently shown the ability to support leaky waves, and to excite plasmonic and HIS resonance frequency modes for use as an antenna. In this paper, we analyzed, designed, and fabricated a TMA by directly feeding edge-located HIS cells through a microstrip feeding network. In contrast to other metasurface antennas that necessitate an external antenna to excite metasurfaces, our approach is… ▽ More HISs have recently shown the ability to support leaky waves, and to excite plasmonic and HIS resonance frequency modes for use as an antenna. In this paper, we analyzed, designed, and fabricated a TMA by directly feeding edge-located HIS cells through a microstrip feeding network. In contrast to other metasurface antennas that necessitate an external antenna to excite metasurfaces, our approach is inspired by the TMA design methodology that directly feeds the HIS cells rather than using it as a reflector. We developed a circuit model for the proposed structure and compared the results with those obtained from full-wave simulations. In addition, our further objective was to simplify the structure based on the working principle of the proposed antenna. This objective was achieved by converting square patches into parallel strip lines, leading to an aperture efficiency of 0.77. This simplification also creates additional space to explore various resonant patterns on the top surface and the feeding network on the bottom surface of the TMA. Full-wave simulation results indicate that, despite the compact dimensions of the proposed array with 64 electrically small patch resonators (1.84λ*1.84λ*0.032λ, whereλis the free space wavelength at 6.0 GHz), it achieves a realized gain, HPBW of about 15.1 dBi and 28° respectively at 6 GHz. Finally, we constructed a prototype and conducted measurements to validate the design. Measured results demonstrate good agreement with simulation ones with a gain of about 13.5 (+-0.5) dBi and a HPBW of 27° at 6 GHz. The proposed TMA is scaled to fit within the required dimensions for smart handheld devices at higher frequencies, while maintaining high gain capability. The design s scalability, single-feed, and compact footprint make it optimal for diverse wireless communication systems, such as car to car communications. △ Less

Submitted 3 December, 2024; originally announced December 2024.

A Modal Analysis of Electromagnetic Fields Coupling into an Open-Ended Waveguide Mounted on a Finite Flange: Evaluation of a Rectangular Waveguide with a Square Flange

Authors: Mohammad Eskandari, Mojtaba Joodaki

Abstract: This paper presents a modal analysis based on the reciprocity theorem to calculate the coupled/penetrated fields into an open-ended waveguide mounted on a finite flange. Although there is no limitation on the geometry and type of the external source, an infinitesimal dipole is chosen to produce a plane wave incident to the waveguide aperture. The proposed method relates the amplitude of each penet… ▽ More This paper presents a modal analysis based on the reciprocity theorem to calculate the coupled/penetrated fields into an open-ended waveguide mounted on a finite flange. Although there is no limitation on the geometry and type of the external source, an infinitesimal dipole is chosen to produce a plane wave incident to the waveguide aperture. The proposed method relates the amplitude of each penetrated mode into the waveguide to the far-field radiation components of that mode from the waveguide aperture. The accuracy of the final result depends on the accuracy of the calculated radiated fields. The radiated field components are calculated considering the reflected fields due to the aperture and the diffracted fields due to the flange edges. For the first time, the impact of a finite flange on the penetrated fields into a waveguide is discussed comprehensively. The geometry of a rectangular waveguide mounted on a thick square flange is selected to be evaluated. The effects of changing the main parameters of the geometry on the penetrated fields are discussed rigorously in various examples. Our results are compared with 3D full-wave simulations, and an excellent agreement was found between the results while our analytical approach showing a 60 times faster performance. In addition, we compared our results with the measurement reported in a previous study. △ Less

Submitted 20 July, 2024; originally announced August 2024.

A Systematic Analytical Design Procedure for Distributed Amplifiers

Authors: Elham Amiri, Mojtaba Joodaki

Abstract: In this paper we present a simple while comprehensive analytical design procedure for distributed amplifiers. Distributed amplifiers are attractive for designers due to their wideband capability. When designing a distributed amplifier, the first question that comes to mind is how wide the bandwidth can be. This paper answers this question by using the self-matching and low-pass properties of a dis… ▽ More In this paper we present a simple while comprehensive analytical design procedure for distributed amplifiers. Distributed amplifiers are attractive for designers due to their wideband capability. When designing a distributed amplifier, the first question that comes to mind is how wide the bandwidth can be. This paper answers this question by using the self-matching and low-pass properties of a distributed amplifier. Self-matching property of a distributed power amplifier is an interesting point that distinguishes it from other types of power amplifiers that are usually based on input and output matching networks. Here the estimation of the bandwidth of a distributed amplifier structure is discussed. The equations that are used in this paper can bring good insight and they can assist designers. Furthermore, we have explained the frequency behavior of a tapered distributed amplifier analytically for the first time. In order to validate the approach presented here, we have used published designs including our previously published design as practical examples. The flowchart of the design procedure is also provided. △ Less

Submitted 24 July, 2024; originally announced July 2024.

Metasurface Energy Harvesters: State-of-the-Art Designs and Their Potential for Energy Sustainable Reconfigurable Intelligent Surfaces

Authors: Alireza Ghaneizadeh, Panagiotis Gavriilidis, Mojtaba Joodaki, George C. Alexandropoulos

Abstract: Metasurface Energy Harvesters (MEHs) have emerged as a prominent enabler of highly efficient Radio Frequency (RF) energy harvesters. This survey delves into the fundamentals of the MEH technology, providing a comprehensive overview of their working principle, unit cell designs and prototypes over various frequency bands, as well as state-of-the art modes of operation. Inspired by the recent academ… ▽ More Metasurface Energy Harvesters (MEHs) have emerged as a prominent enabler of highly efficient Radio Frequency (RF) energy harvesters. This survey delves into the fundamentals of the MEH technology, providing a comprehensive overview of their working principle, unit cell designs and prototypes over various frequency bands, as well as state-of-the art modes of operation. Inspired by the recent academic and industrial interest on Reconfigurable Intelligent Surfaces (RISs)for the upcoming sixth-Generation (6G) of wireless networks, we study the interplay between this technology and MEHs aiming for energy sustainable RISs power by metasurface-based RF energy harvesting. We present a novel hybrid unit cell design capable of simultaneous energy harvesting and 1-bit tunable reflection whose dual-functional response is validated via full-wave simulations. Then, we conduct a comparative collection of real-world measurements for ambient RF power levels and power consumption budgets of reflective RISs to unveil the potential for a self-sustainable RIS via ambient RF energy harvesting. The paper is concluded with an elaborative discussion on open design challenges and future research directions for MEHs and energy sustainable hybrid RISs. △ Less

Submitted 19 July, 2024; originally announced July 2024.

A new extremely ultrathin metasurface energy harvester and its simple modelling based on resonant half-wave dipole antenna

Authors: Alireza Ghaneizadeh, Mojtaba Joodaki, Josef Börcsök, Khalil Mafinezhad

Abstract: In this paper we propose a novel design approach for an ultrathin metasurface energy harvester based on a surrogate model of dipole antenna. A significant advantage of this idea is the reduction of the time of the design process retrieved from a surrogate model of the resonant half-wave dipole antenna embedded in a medium. However, the design of a new electromagnetic energy harvester with a deep-s… ▽ More In this paper we propose a novel design approach for an ultrathin metasurface energy harvester based on a surrogate model of dipole antenna. A significant advantage of this idea is the reduction of the time of the design process retrieved from a surrogate model of the resonant half-wave dipole antenna embedded in a medium. However, the design of a new electromagnetic energy harvester with a deep-subwavelength thickness (~ 0.004λ) is the major concern of this work. The proposed structure shows an enhanced level of absorption. Decreasing the thickness of metasurface as a new classification of energy harvester, we have managed to demonstrate the stability of the efficiency. In addition, this metasurface energy harvester proved to maintain a relatively constant performance (efficiency and HPBW more than 85% and 7%, respectively) as the angle of the EM incident wave was changed over a range of 75 degrees in the transverse magnetic (TM) polarization. △ Less

Submitted 18 July, 2024; originally announced July 2024.