-
Pragmatism in industrial modelling, applied to "ladle lifetime in the steel industry"
Authors:
Stein Tore Johansen,
Bjørn Tore Løvfall,
Tamara Rodriguez Duran,
Josip Zoric
Abstract:
A methodology for building pragmatic physics based models (Zoric et al., 2015b) is here adapted to a use-case in the steel industry. The challenge is to predict the erosion of steel ladle linings, such that the model can support operators to decide if the lade lining can be used one more time or not. If the ladle has too thin lining 140 tons of hot liquid steel may escape out of the ladle, with hu…
▽ More
A methodology for building pragmatic physics based models (Zoric et al., 2015b) is here adapted to a use-case in the steel industry. The challenge is to predict the erosion of steel ladle linings, such that the model can support operators to decide if the lade lining can be used one more time or not. If the ladle has too thin lining 140 tons of hot liquid steel may escape out of the ladle, with huge consequences for workers and plant. The development was done with a very small core team (two developers), which is typical for many industrial developments. The adopted workflow for the development, challenges that were faced, and some model results are presented. One key learning is that development of models should allow time for maturing the process understanding, and time should be given for many iterations by "questions-responses and actions" at the various levels in the model development. The good interactions between development team and industry case owner is an important success factor. In this case the results of using the PPBM (Pragmatism in physics-based modelling) were good thanks to very successful interaction between development team and industry case owner. Combining or extending the model with use of ML methods and cognition-related methods, such as knowledge graphs and self-adaptive algorithms is discussed.
△ Less
Submitted 28 February, 2023;
originally announced February 2023.
-
Pragmatical physics-based model for ladle lifetime prediction
Authors:
Stein Tore Johansen,
Bjørn Tore Løvfall,
Tamara Rodriguez Duran
Abstract:
In this paper we develop a physics-based model for the erosion of lining in steel ladles. The model predicts the temperature evolution in the liquid slag, steel, refractory bricks and outer steel casing. The flows of slag and steel is due to forced convection by inert gas injection, vacuum treatment (extreme bubble expansion), natural convection and waves caused by the gas stirring. The lining ero…
▽ More
In this paper we develop a physics-based model for the erosion of lining in steel ladles. The model predicts the temperature evolution in the liquid slag, steel, refractory bricks and outer steel casing. The flows of slag and steel is due to forced convection by inert gas injection, vacuum treatment (extreme bubble expansion), natural convection and waves caused by the gas stirring. The lining erosion is due to dissolution of refractory elements into the steel or slag. The mass and heat transfer coefficients inside the ladle, during gas stirring, is modeled based on wall functions which take the distribution of wall shear velocities as a critical input. The wall shear velocities are obtained from CFD (Computational Fluid Dynamics) simulations for sample of scenarios, spanning out the operational space, and using curve fitting a model could be built. The model is capable of reproducing both thermal evolution and erosion evolution well. Deviations between model predictions and industrial data are discussed. The model is fast and has been tested successfully in a "semi-online" application. The model source code is made available to the public on https://github.com/SINTEF/refractorywear.
△ Less
Submitted 28 February, 2023;
originally announced February 2023.
-
A wall-function approach for direct precipitation/crystallization fouling in cfd modelling
Authors:
Sverre Gullikstad Johnsen,
Stein Tore Johansen,
Bernd Wittgens
Abstract:
The main objective of this paper is to present a generic modelling framework, for the diffusive mass transport through the turbulent, reactive boundary layer of multi-component fluid mixtures that precipitate on the wall. The modelling is based on Maxwell-Stefan diffusion in multi-component mixtures, the relaxation to chemical equilibrium model, and the single-phase Navier-Stokes equations. Final-…
▽ More
The main objective of this paper is to present a generic modelling framework, for the diffusive mass transport through the turbulent, reactive boundary layer of multi-component fluid mixtures that precipitate on the wall. The modelling is based on Maxwell-Stefan diffusion in multi-component mixtures, the relaxation to chemical equilibrium model, and the single-phase Navier-Stokes equations. Final-ly, turbulence is introduced by Reynolds-averaging. The governing equations are simplified in accordance with common assumptions of computational fluid dynamics (CFD), and based on the assumption that the over-all bulk flow is parallel to the wall, 1-dimensional equations for the species and heat transport perpendicular to the wall have been formulated. The equations are solved on a fine grid in order to fully resolve the boundary layer, and the effect of allowing/disallowing deposition and chemical reactions was investigated for a simplified test-case (4-component ideal mixture of perfect gasses capable of chemical reaction and sublimation fouling).
The developed framework can be employed as a sub-grid model for direct precipitation/crystallization/solidifica-tion fouling in coarse grid CFD models.
△ Less
Submitted 9 June, 2017;
originally announced June 2017.
-
On the wall boundary conditions for species-specific mass conservation equations in mathematical modelling of direct precipitation fouling from supersaturated, multi-component fluid mixtures
Authors:
S. G. Johnsen,
T. M. Pääkkönen,
S. Andersson,
S. T. Johansen,
B. Wittgens
Abstract:
The mathematical modelling of species transport in the turbulent boundary layer of fluids that precipitate on the wall, is an important topic at the heart of one of the biggest challenges in efficient energy utilization in all process industries; namely the fouling of heat exchangers. A major contributor to the complexity of the problem is the multi-length-scale nature of the governing phenomena.…
▽ More
The mathematical modelling of species transport in the turbulent boundary layer of fluids that precipitate on the wall, is an important topic at the heart of one of the biggest challenges in efficient energy utilization in all process industries; namely the fouling of heat exchangers. A major contributor to the complexity of the problem is the multi-length-scale nature of the governing phenomena. That is, transport mechanisms dominating at the nano-scale may be responsible for the macroscopic performance of the industrial process. This paper addresses some of the challenges that need to be met in modelling the boundary conditions, i.e. the atomic/molecular-scale conditions, for the species-specific mass conservation equations, at the wall, for single-phase, multi-component fluids that precipitate at the wall.
△ Less
Submitted 21 March, 2017; v1 submitted 4 March, 2017;
originally announced March 2017.
