-
Multi-junction surface ion trap for quantum computing
Authors:
J. D. Sterk,
M. G. Blain,
M. Delaney,
R. Haltli,
E. Heller,
A. L. Holterhoff,
T. Jennings,
N. Jimenez,
A. Kozhanov,
Z. Meinelt,
E. Ou,
J. Van Der Wall,
C. Noel,
D. Stick
Abstract:
Surface ion traps with two-dimensional layouts of trapping regions are natural architectures for storing large numbers of ions and supporting the connectivity needed to implement quantum algorithms. Many of the components and operations needed to fully exploit this architecture have already been demonstrated, including operation at cryogenic temperatures with low heating, low excitation transport,…
▽ More
Surface ion traps with two-dimensional layouts of trapping regions are natural architectures for storing large numbers of ions and supporting the connectivity needed to implement quantum algorithms. Many of the components and operations needed to fully exploit this architecture have already been demonstrated, including operation at cryogenic temperatures with low heating, low excitation transport, and ion control and detection with integrated photonics. Here we demonstrate a trap that addresses the scaling challenge of increasing power dissipation as the RF electrode increases in size. By raising the RF electrode and removing most of the insulating dielectric layer below it we reduce both ohmic and dielectric power dissipation. We also measure heating rates across a range of motional frequencies and for different voltage sources in a trap with a raised RF electrode but solid dielectric.
△ Less
Submitted 29 February, 2024;
originally announced March 2024.
-
On the evaluation of the suitability of the materials used to 3D print holographic acoustic lenses to correct transcranial focused ultrasound aberrations
Authors:
Marcelino Ferri,
José M. Bravo,
Javier Redondo,
Juan V. Sánchez-Pérez,
Noé Jiménez,
Sergio Jimenez-Gambín,
Francisco Camarena
Abstract:
The correction of transcranial focused ultrasound aberrations is a relevant topic for enhancing various non-invasive medical treatments. Nowadays, the most widely accepted method to improve focusing is the emission through multi-element phased arrays; however, a new disruptive technology, based on 3D printed holographic acoustic lenses, has recently been proposed overcoming the spatial limitations…
▽ More
The correction of transcranial focused ultrasound aberrations is a relevant topic for enhancing various non-invasive medical treatments. Nowadays, the most widely accepted method to improve focusing is the emission through multi-element phased arrays; however, a new disruptive technology, based on 3D printed holographic acoustic lenses, has recently been proposed overcoming the spatial limitations of phased arrays due to the submillimetric precision of the latest generation of 3D printers. This works aims to optimize this recent solution; particularly, the preferred acoustic properties of the polymers used for printing the lens are systematically analyzed, paying special attention to the effect of p-wave speed and its relationship to the achievable voxel size of 3D printers. Results from simulations and experiments clearly show that there are optimal ranges for lens thickness and p-wave speed, fairly independent of the emitted frequency, the transducer aperture, or the transducer-target distance, given a particular voxel size
△ Less
Submitted 31 January, 2024;
originally announced January 2024.
-
Perfect absorption in mirror-symmetric acoustic metascreens
Authors:
V. Romero-García,
N. Jiménez,
J. -P. Groby,
A. Merkel,
V. Tournat,
G. Theocharis,
O. Richoux,
V. Pagneux
Abstract:
Mirror-symmetric acoustic metascreens producing perfect absorption independently of the incidence side are theoretically and experimentally reported in this work. The mirror-symmetric resonant building blocks of the metascreen support symmetric and antisymmetric resonances that can be tuned to be at the same frequency (degenerate resonances). The geometry of the building blocks is optimized to cri…
▽ More
Mirror-symmetric acoustic metascreens producing perfect absorption independently of the incidence side are theoretically and experimentally reported in this work. The mirror-symmetric resonant building blocks of the metascreen support symmetric and antisymmetric resonances that can be tuned to be at the same frequency (degenerate resonances). The geometry of the building blocks is optimized to critically couple both the symmetric and the antisymmetric resonances at the same frequency allowing perfect absorption of sound from both sides of the metascreen. A hybrid analytical model based on the transfer matrix method and the modal decomposition of the exterior acoustic field is developed to analyze the scattering properties of the metascreen. The resulting geometry is 3D printed and experimentally tested in an impedance tube. Experimental results agree well with the theoretical predictions proving the efficiency of these metascreens for the perfect absorption of sound in the ventilation problems.
△ Less
Submitted 20 July, 2020; v1 submitted 16 July, 2020;
originally announced July 2020.
-
Aerogel-based metasurfaces for perfect acoustic energy absorption
Authors:
Antonio A. Fernández-Marín,
Noé Jiménez,
Jean-Philippe Groby,
José Sánchez-Dehesa,
Vicente Romero-García
Abstract:
The unusual viscoelastic properties of silica aerogel plates are efficiently used to design subwavelength perfect sound absorbers. We theoretically, numerically and experimentally report a perfect absorbing metamaterial panel made of periodically arranged resonant building blocks consisting of a slit loaded by a clamped aerogel plate backed by a closed cavity. The impedance matching condition is a…
▽ More
The unusual viscoelastic properties of silica aerogel plates are efficiently used to design subwavelength perfect sound absorbers. We theoretically, numerically and experimentally report a perfect absorbing metamaterial panel made of periodically arranged resonant building blocks consisting of a slit loaded by a clamped aerogel plate backed by a closed cavity. The impedance matching condition is analyzed using the Argand diagram of the reflection coefficient, i.e., the trajectory of the reflection coefficient as a function of frequency in the complex plane. The lack or excess of losses in the system can be identified via this Argand diagram in order to achieve the impedance matching condition. The universality of this tool can be further exploited to design more complex metasurfaces for perfect sound absorption, thus allowing the rapid design of novel and efficient absorbing metamaterials.
△ Less
Submitted 11 June, 2019; v1 submitted 11 June, 2019;
originally announced June 2019.
-
Monitoring the setting of calcium sulphate bone-graft substitute using ultrasonic backscattering
Authors:
Josep Rodríguez-Sendra,
Noé Jiménez,
Rubén Picó,
Joan Faus,
Francisco Camarena
Abstract:
We report a method to monitor the setting process of bone-graft substitutes (calcium sulphate) using ultrasonic backscattering techniques. Analyzing the backscattered fields using a pulse-echo technique, we show that it is possible to dynamically describe the acoustic properties of the material which are linked to its setting state. Several experiments were performed to control the setting process…
▽ More
We report a method to monitor the setting process of bone-graft substitutes (calcium sulphate) using ultrasonic backscattering techniques. Analyzing the backscattered fields using a pulse-echo technique, we show that it is possible to dynamically describe the acoustic properties of the material which are linked to its setting state. Several experiments were performed to control the setting process of calcium sulphate using a 3.5-MHz transducer. The variation of the apparent integrated backscatter (AIB) with time during the setting process is analyzed and compared with measurements of the speed of sound (SOS) and temperature of the sample. The correlation of SOS and AIB allows to clearly identify two different states of the samples, liquid and solid, in addition to the transition period. Results show that using backscattering analysis the setting state of the material can be estimated with a threshold of 15 dB. This ultrasonic technique is indeed a first step to develop real-time monitoring systems for time-varying complex media as those present in bone regeneration for dental implantology applications.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
Holograms to focus arbitrary ultrasonic fields through the skull
Authors:
Sergio Jiménez-Gambín,
Noé Jiménez,
José María Benlloch,
Francisco Camarena
Abstract:
We report 3D-printed acoustic holographic lenses for the formation of ultrasonic fields of complex spatial distribution inside the skull. Using holographic lenses, we experimentally, numerically and theoretically produce acoustic beams whose spatial distribution matches target structures of the central nervous system. In particular, we produce three types of targets of increasing complexity. First…
▽ More
We report 3D-printed acoustic holographic lenses for the formation of ultrasonic fields of complex spatial distribution inside the skull. Using holographic lenses, we experimentally, numerically and theoretically produce acoustic beams whose spatial distribution matches target structures of the central nervous system. In particular, we produce three types of targets of increasing complexity. First, a set of points are selected at the center of both right and left human hippocampi. Experiments using a skull phantom and 3D printed acoustic holographic lenses show that the corresponding bifocal lens simultaneously focuses acoustic energy at the target foci, with good agreement between theory and simulations. Second, an arbitrary curve is set as the target inside the skull phantom. Using time-reversal methods the holographic beam bends following the target path, in a similar way as self-bending beams do in free space. Finally, the right human hippocampus is selected as a target volume. The focus of the corresponding holographic lens overlaps with the target volume in excellent agreement between theory in free-media, and experiments and simulations including the skull phantom. The precise control of focused ultrasound into the central nervous system is mainly limited due to the strong phase aberrations produced by refraction and attenuation of the skull. Using the present method, the ultrasonic beam can be focused not only at a single point but overlapping one or various target structures simultaneously using low-cost 3D-printed acoustic holographic lens. The results open new paths to spread incoming biomedical ultrasound applications including blood-brain barrier opening or neuromodulation.
△ Less
Submitted 28 May, 2019; v1 submitted 18 February, 2019;
originally announced February 2019.
-
Rainbow-trapping absorbers: Broadband, perfect and asymmetric sound absorption by subwavelength panels with ventilation
Authors:
Noé Jiménez,
Vicent Romero-García,
Vincent Pagneux,
Jean-Philippe Groby
Abstract:
Perfect, broadband and asymmetric sound absorption is theoretically, numerically and experimentally reported by using subwavelength thickness panels in a transmission problem. The panels are composed of a periodic array of varying cross-section waveguides, each of them being loaded by an array of Helmholtz resonators (HRs) with graded dimensions. The low cut-off frequency of the absorption band is…
▽ More
Perfect, broadband and asymmetric sound absorption is theoretically, numerically and experimentally reported by using subwavelength thickness panels in a transmission problem. The panels are composed of a periodic array of varying cross-section waveguides, each of them being loaded by an array of Helmholtz resonators (HRs) with graded dimensions. The low cut-off frequency of the absorption band is fixed by the resonance frequency of the deepest HR, that reduces drastically the transmission. The preceding HR is designed with a slightly higher resonance frequency with a geometry that allows the impedance matching to the surrounding medium. Therefore, reflection vanishes and the structure is critically coupled. This results in perfect sound absorption at a single frequency. We report perfect absorption at 300 Hz for a structure whose thickness is 40 times smaller than the wavelength. Moreover, this process is repeated by adding HRs to the waveguide, each of them with a higher resonance frequency than the preceding one. Using this frequency cascade effect, we report quasi-perfect sound absorption over almost two frequency octaves ranging from 300 to 1000 Hz for a panel composed of 9 resonators with a total thickness of 11 cm, i.e., 10 times smaller than the wavelength at 300 Hz.
△ Less
Submitted 31 July, 2017;
originally announced August 2017.
-
Nonlinear dispersive waves in repulsive lattices
Authors:
A. Mehrem,
N. Jiménez,
L. Salmerón-Contreras,
X. García-Andrés,
L. M. García-Raffi,
R. Picó,
V. Sánchez-Morcillo
Abstract:
The propagation of nonlinear waves in a lattice of repelling particles is studied theoretically and experimentally. A simple experimental setup is proposed, consisting in an array of coupled magnetic dipoles. By driving harmonically the lattice at one boundary, we excite propagating waves and demonstrate different regimes of mode conversion into higher harmonics, strongly influenced by dispersion…
▽ More
The propagation of nonlinear waves in a lattice of repelling particles is studied theoretically and experimentally. A simple experimental setup is proposed, consisting in an array of coupled magnetic dipoles. By driving harmonically the lattice at one boundary, we excite propagating waves and demonstrate different regimes of mode conversion into higher harmonics, strongly influenced by dispersion and discreteness. The phenomenon of acoustic dilatation of the chain is also predicted and discussed. The results are compared with the theoretical predictions of $α$-FPU equation, describing a chain of masses connected by nonlinear quadratic springs. The results can be extrapolated to other systems described by this equation.
△ Less
Submitted 11 June, 2017; v1 submitted 10 March, 2017;
originally announced March 2017.
-
Broadband quasi perfect absorption using chirped multi-layer porous materials
Authors:
Noé Jiménez,
Vicent Romero-García,
Alejandro Cebrecos,
Rubén Picó,
Víctor J. Sánchez-Morcillo,
Lluis M. García-Raffi
Abstract:
This work theoretically analyzes the sound absorption properties of a chirped multi-layer porous material including transmission, in particular showing the broadband unidirectional absorption properties of the system. Using the combination of the impedance matching condition and the balance between the leakage and the intrinsic losses, the system is designed to have broadband unidirectional and qu…
▽ More
This work theoretically analyzes the sound absorption properties of a chirped multi-layer porous material including transmission, in particular showing the broadband unidirectional absorption properties of the system. Using the combination of the impedance matching condition and the balance between the leakage and the intrinsic losses, the system is designed to have broadband unidirectional and quasi perfect absorption. The transfer and scattering matrix formalism, together with numerical simulations based on the finite element method are used to demonstrate the results showing excellent agreement between them. The proposed system allows to construct broadband sound absorbers with improved absorption in the low frequency regime using less amount of material than the complete bulk porous layer.
△ Less
Submitted 10 November, 2016; v1 submitted 30 September, 2016;
originally announced October 2016.
-
Dynamic Nonlinear Focal Shift in Amplitude Modulated Moderately Focused Acoustic Beams
Authors:
Noé Jiménez,
Francisco Camarena,
Nuria González-Salido
Abstract:
The phenomenon of the displacement of the position of the pressure, intensity and acoustic radiation force maxima along the axis of focused acoustic beams under increasing driving amplitudes (nonlinear focal shift) is studied for the case of a moderately focused beam excited with continuous and 25 kHz amplitude modulated signals, both in water and tissue. We prove that in amplitude modulated beams…
▽ More
The phenomenon of the displacement of the position of the pressure, intensity and acoustic radiation force maxima along the axis of focused acoustic beams under increasing driving amplitudes (nonlinear focal shift) is studied for the case of a moderately focused beam excited with continuous and 25 kHz amplitude modulated signals, both in water and tissue. We prove that in amplitude modulated beams the linear and nonlinear propagation effects coexist in a semi-period of modulation, giving place to a complex dynamic behaviour, where the singular points of the beam (peak pressure, rarefaction, intensity and acoustic radiation force) locate at different points on axis as a function of time. These entire phenomena are explained in terms of harmonic generation and absorption during the propagation in a lossy nonlinear medium both, for a continuous and an amplitude modulated beam. One of the possible applications of the acoustic radiation force displacement is the generation of shear waves at different locations by using a focused mono-element transducer excited with an amplitude modulated signal.
△ Less
Submitted 13 October, 2016;
originally announced October 2016.
-
Quasi-perfect absorption by sub-wavelength acoustic panels in transmission using accumulation of resonances due to slow sound
Authors:
Noé Jiménez,
Vicent Romero-García,
Vincent Pagneux,
Jean-Philippe Groby
Abstract:
We theoretically and experimentally report sub-wavelength resonant panels for low-frequency quasi-perfect sound absorption including transmission by using the accumulation of cavity resonances due to the slow sound phenomenon. The sub-wavelength panel is composed of periodic horizontal slits loaded by identical Helmholtz resonators (HRs). Due to the presence of the HRs, the propagation inside each…
▽ More
We theoretically and experimentally report sub-wavelength resonant panels for low-frequency quasi-perfect sound absorption including transmission by using the accumulation of cavity resonances due to the slow sound phenomenon. The sub-wavelength panel is composed of periodic horizontal slits loaded by identical Helmholtz resonators (HRs). Due to the presence of the HRs, the propagation inside each slit is strongly dispersive, with near-zero phase velocity close to the resonance of the HRs. In this slow sound regime, the frequencies of the cavity modes inside the slit are down-shifted and the slit behaves as a subwavelength resonator. Moreover, due to strong dispersion, the cavity resonances accumulate at the limit of the bandgap below the resonance frequency of the HRs. Near this accumulation frequency, simultaneously symmetric and antisymmetric quasi-critical coupling can be achieved. In this way, using only monopolar resonators quasi-perfect absorption can be obtained in a material including transmission.
△ Less
Submitted 13 October, 2016;
originally announced October 2016.
-
Ultra-thin metamaterial for perfect and omnidirectional sound absorption
Authors:
Noé Jiménez,
Weichun Huang,
Vicent Romero-García,
Vincent Pagneux,
Jean-Philippe Groby
Abstract:
Using the concepts of slow sound and of critical coupling, an ultra-thin acoustic metamaterial panel for perfect and omnidirectional absorption is theoretically and experimentally conceived in this work. The system is made of a rigid panel with a periodic distribution of thin closed slits, the upper wall of which is loaded by Helmholtz Resonators (HRs). The presence of resonators produces a slow s…
▽ More
Using the concepts of slow sound and of critical coupling, an ultra-thin acoustic metamaterial panel for perfect and omnidirectional absorption is theoretically and experimentally conceived in this work. The system is made of a rigid panel with a periodic distribution of thin closed slits, the upper wall of which is loaded by Helmholtz Resonators (HRs). The presence of resonators produces a slow sound propagation shifting the resonance frequency of the slit to the deep sub-wavelength regime ($λ/88$). By controlling the geometry of the slit and the HRs, the intrinsic visco-thermal losses can be tuned in order to exactly compensate the energy leakage of the system and fulfill the critical coupling condition to create the perfect absorption of sound in a large range of incidence angles due to the deep subwavelength behavior.
△ Less
Submitted 23 June, 2016;
originally announced June 2016.
-
Formation of high-order acoustic Bessel beams by spiral diffraction gratings
Authors:
Noé Jiménez,
Rubén Picó,
Víctor Sánchez-Morcillo,
Vicent Romero-García,
Lluis M. García-Raffi,
Kestutis Staliunas
Abstract:
The formation of high-order Bessel beams by a passive acoustic device consisting of an Archimedes' spiral diffraction grating is theoretically, numerically and experimentally reported in this work. These beams are propagation-invariant solutions of the Helmholtz equation and are characterized by an azimuthal variation of the phase along its annular spectrum producing an acoustic vortex in the near…
▽ More
The formation of high-order Bessel beams by a passive acoustic device consisting of an Archimedes' spiral diffraction grating is theoretically, numerically and experimentally reported in this work. These beams are propagation-invariant solutions of the Helmholtz equation and are characterized by an azimuthal variation of the phase along its annular spectrum producing an acoustic vortex in the near field. In our system, the scattering of plane acoustic waves by the spiral grating leads to the formation of the acoustic vortex with zero pressure on-axis and the angular phase dislocations characterized by the spiral geometry. The order of the generated Bessel beam and, as a consequence, the size of the generated vortex can be fixed by the number of arms in the spiral diffraction grating. The obtained results allow to obtain Bessel beams with controllable vorticity by a passive device, which has potential applications in low-cost acoustic tweezers and acoustic radiation force devices.
△ Less
Submitted 28 April, 2016;
originally announced April 2016.
-
Macroscopic acousto-mechanical analogy of a microbubble
Authors:
Jennifer Chaline,
Noé Jiménez,
Ahmed Mehrem,
Ayache Bouakaz,
Serge Dos Santos,
Víctor J. Sánchez-Morcillo
Abstract:
Microbubbles, either in the form of free gas bubbles surrounded by a fluid or encapsulated bubbles used currently as contrast agents for medical echography, exhibit complex dynamics under specific acoustic excitations. Nonetheless, considering their micron size and the complexity of their interaction phenomenon with ultrasound waves, expensive and complex experiments and/or simulations are require…
▽ More
Microbubbles, either in the form of free gas bubbles surrounded by a fluid or encapsulated bubbles used currently as contrast agents for medical echography, exhibit complex dynamics under specific acoustic excitations. Nonetheless, considering their micron size and the complexity of their interaction phenomenon with ultrasound waves, expensive and complex experiments and/or simulations are required for their analysis. The behavior of a microbubble along its equator can be linked to a system of coupled oscillators. In this study, the oscillatory behavior of a microbubble has been investigated through an acousto-mechanical analogy based on a ring-shaped chain of coupled pendula. Observation of parametric vibration modes of the pendula ring excited at frequencies between $1$ and $5$ Hz is presented. Simulations have been carried out and show mode mixing phenomena. The relevance of the analogy between a microbubble and the macroscopic acousto-mechanical setup is discussed and suggested as an alternative way to investigate the complexity of microbubble dynamics.
△ Less
Submitted 23 September, 2015;
originally announced September 2015.
-
Nonlinear propagation and control of acoustic waves in phononic superlattices
Authors:
Noé Jiménez,
Ahmed Mehrem,
Rubén Picó,
Lluís M. García-Raffi,
Víctor J. Sánchez-Morcillo
Abstract:
The propagation of intense acoustic waves in a one-dimensional phononic crystal is studied. The medium consists in a structured fluid, formed by a periodic array of fluid layers with alternating linear acoustic properties and quadratic nonlinearity coefficient. The spacing between layers is of the order of the wavelength, therefore Bragg effects such as band-gaps appear. We show that the interplay…
▽ More
The propagation of intense acoustic waves in a one-dimensional phononic crystal is studied. The medium consists in a structured fluid, formed by a periodic array of fluid layers with alternating linear acoustic properties and quadratic nonlinearity coefficient. The spacing between layers is of the order of the wavelength, therefore Bragg effects such as band-gaps appear. We show that the interplay between strong dispersion and nonlinearity leads to new scenarios of wave propagation. The classical waveform distortion process typical of intense acoustic waves in homogeneous media can be strongly altered when nonlinearly generated harmonics lie inside or close to band gaps. This allows the possibility of engineer a medium in order to get a particular waveform. Examples of this include the design of media with effective (e.g. cubic) nonlinearities, or extremely linear media (where distortion can be cancelled). The presented ideas open a way towards the control of acoustic wave propagation in nonlinear regime.
△ Less
Submitted 19 May, 2015;
originally announced August 2015.
-
Time-domain simulation of ultrasound propagation in a tissue-like medium based on the resolution of the nonlinear acoustic constitutive relations
Authors:
Noé Jiménez,
Francisco Camarena,
Javier Redondo,
Víctor Sánchez-Morcillo,
Yi Hou,
Elisa E. Konofagou
Abstract:
A time-domain numerical code based on the constitutive relations of nonlinear acoustics for simulating ultrasound propagation is presented. To model frequency power law attenuation, such as observed in biological media, multiple relaxation processes are included and relaxation parameters are fitted to both exact frequency power law attenuation and empirically measured attenuation of a variety of t…
▽ More
A time-domain numerical code based on the constitutive relations of nonlinear acoustics for simulating ultrasound propagation is presented. To model frequency power law attenuation, such as observed in biological media, multiple relaxation processes are included and relaxation parameters are fitted to both exact frequency power law attenuation and empirically measured attenuation of a variety of tissues that does not fit an exact power law. A computational technique based on artificial relaxation is included to correct the non-negligible numerical dispersion of the numerical method and to improve stability when shock waves are present. This technique avoids the use of high order finite difference schemes, leading to fast calculations. The numerical code is especially suitable to study high intensity and focused axisymmetric acoustic beams in tissue-like medium, as it is based on the full constitutive relations that overcomes the limitations of the parabolic approximations, while some specific effects not contemplated by the Westervelt equation can be also studied. The accuracy of the method is discussed by comparing the proposed simulation solutions to one-dimensional analytical ones, to $k$-space numerical solutions and also to experimental data from a focused beam propagating in a frequency power law attenuation media.
△ Less
Submitted 1 July, 2015;
originally announced July 2015.
-
Nonlinear Acoustics FDTD method including Frequency Power Law Attenuation for Soft Tissue Modeling
Authors:
Noé Jiménez,
Javier Redondo,
Víctor Sánchez-Morcillo,
Francisco Camarena,
Yi Hou,
Elisa E. Konofagou
Abstract:
This paper describes a model for nonlinear acoustic wave propagation through absorbing and weakly dispersive media, and its numerical solution by means of finite differences in time domain method (FDTD). The attenuation is based on multiple relaxation processes, and provides frequency dependent absorption and dispersion without using computational expensive convolutional operators. In this way, by…
▽ More
This paper describes a model for nonlinear acoustic wave propagation through absorbing and weakly dispersive media, and its numerical solution by means of finite differences in time domain method (FDTD). The attenuation is based on multiple relaxation processes, and provides frequency dependent absorption and dispersion without using computational expensive convolutional operators. In this way, by using an optimization algorithm the coefficients for the relaxation processes can be obtained in order to fit a frequency power law that agrees the experimentally measured attenuation data for heterogeneous media over the typical frequency range for ultrasound medical applications. Our results show that two relaxation processes are enough to fit attenuation data for most soft tissues in this frequency range including the fundamental and the first ten harmonics. Furthermore, this model can fit experimental attenuation data that do not follow exactly a frequency power law over the frequency range of interest. The main advantage of the proposed method is that only one auxiliary field per relaxation process is needed, which implies less computational resources compared with time-domain fractional derivatives solvers based on convolutional operators.
△ Less
Submitted 26 January, 2014;
originally announced January 2014.
