-
Dynamic injection of a compressible gas into a confined porous layer
Authors:
Peter Castellucci,
Radha Boya,
Lin Ma,
Igor L. Chernyavsky,
Oliver E. Jensen
Abstract:
Subsurface gas storage is a critical technology in global efforts to mitigate climate change. In particular, underground hydrogen storage offers a promising solution for integrating large-scale renewable energy into the power grid. When injected into the subsurface, hydrogen's low viscosity compared to the resident brine causes it to spread rapidly, forming a thin gas layer above the brine, compli…
▽ More
Subsurface gas storage is a critical technology in global efforts to mitigate climate change. In particular, underground hydrogen storage offers a promising solution for integrating large-scale renewable energy into the power grid. When injected into the subsurface, hydrogen's low viscosity compared to the resident brine causes it to spread rapidly, forming a thin gas layer above the brine, complicating recovery. In long aquifers, the large viscous pressure drop between the source and the outlet induces significant pressure variations, which may lead to substantial density changes in the injected gas. To examine the role of gas compressibility in the spreading dynamics, we use long-wave theory to derive coupled nonlinear evolution equations for the gas pressure and liquid/gas interface height, focusing on the limit of long domains, weak gas compressibility and low liquid/gas mobility ratio. Simulations using these equations are supplemented with a comprehensive asymptotic analysis of parameter regimes. Unlike the near-incompressible limit, in which gas spreading rates are dictated by the source strength and mobility ratio, and any compressive effects are transient, we show how, in general, compression of the main gas bubble can generate dynamic pressure changes that are coupled to those in the thin gas layer that spreads over the liquid, with compressive effects having a sustained influence along the layer. This allows compressibility to reduce spreading rates and lower gas pressures. We characterise this behaviour via a set of low-order models that reveal dominant scalings, highlighting the role of compressibility in mediating the evolution of the gas layer.
△ Less
Submitted 8 May, 2025;
originally announced May 2025.
-
A functional exchange shunt in the umbilical cord: the role of coiling in solute and heat transfer
Authors:
Tianran Wan,
Edward D. Johnstone,
Shier Nee Saw,
Oliver E. Jensen,
Igor L. Chernyavsky
Abstract:
The umbilical cord plays a critical role in delivering nutrients and oxygen from the placenta to the fetus through the umbilical vein, while the two umbilical arteries carry deoxygenated blood with waste products back to the placenta. Although solute exchange in the placenta has been extensively studied, exchange within the cord tissue has not been investigated. Here, we explore the hypothesis tha…
▽ More
The umbilical cord plays a critical role in delivering nutrients and oxygen from the placenta to the fetus through the umbilical vein, while the two umbilical arteries carry deoxygenated blood with waste products back to the placenta. Although solute exchange in the placenta has been extensively studied, exchange within the cord tissue has not been investigated. Here, we explore the hypothesis that the coiled structure of the umbilical cord could strengthen diffusive coupling between the arteries and the vein, resulting in a functional shunt. We calculate the diffusion of solutes, such as oxygen, and heat in the umbilical cord to quantify how this shunt is affected by vascular configuration within the cord. We demonstrate that the shunt is enhanced by coiling and vessel proximity. Furthermore, our model predicts that typical vascular configurations of the human cord tend to minimise shunting, which could otherwise disrupt thermal regulation of the fetus. We also show that the exchange, amplified by coiling, can provide additional oxygen supply to the cord tissue surrounding the umbilical vessels.
△ Less
Submitted 19 February, 2025;
originally announced February 2025.
-
Viscoplasticity can stabilise liquid collar motion on vertical cylinders
Authors:
James D. Shemilt,
Alice B. Thompson,
Alex Horsley,
Carl A. Whitfield,
Oliver E. Jensen
Abstract:
Liquid films coating vertical cylinders can form annular liquid collars which translate downwards under gravity. We investigate the dynamics of a thin viscoplastic liquid film coating the interior or exterior of a vertical cylindrical tube, quantifying how the yield stress modifies both the Rayleigh-Plateau instability leading to collar formation and the translation of collars down the tube. We us…
▽ More
Liquid films coating vertical cylinders can form annular liquid collars which translate downwards under gravity. We investigate the dynamics of a thin viscoplastic liquid film coating the interior or exterior of a vertical cylindrical tube, quantifying how the yield stress modifies both the Rayleigh-Plateau instability leading to collar formation and the translation of collars down the tube. We use thin-film theory to derive an evolution equation for the layer thickness, which we solve numerically to determine the nonlinear dynamics of an initially flat layer. A flat layer is unstable to small disturbances in the free-surface height when gravity is sufficiently strong to make the fluid yield. We use matched asymptotics to derive a model describing the quasi-steady translation of a slender liquid collar when the Bond number is small. The structure of the asymptotic solution for a viscoplastic collar shares some features with the Newtonian version, but there are several novel asymptotic regions that emerge at the two ends of the collar. The global force balance, which determines the collar's speed, is modified by a leading-order contribution from viscous drag in the collar when the liquid is viscoplastic. We use the asymptotic model to describe slow changes in collar volume when the film thicknesses ahead of, and behind, the collar are unequal. When the film thickness ahead of the collar is less than a critical value that we determine, viscoplastic collars adjust their volume and reach a steadily-translating state. This contrasts with the Newtonian problem, where the only state in which steady translation occurs is unstable to small changes in the film thickness.
△ Less
Submitted 16 February, 2025; v1 submitted 12 February, 2025;
originally announced February 2025.
-
Drag reduction in surfactant-contaminated superhydrophobic channels at high Péclet numbers
Authors:
Samuel D. Tomlinson,
Frédéric Gibou,
Paolo Luzzatto-Fegiz,
Fernando Temprano-Coleto,
Oliver E. Jensen,
Julien R. Landel
Abstract:
Motivated by microfluidic applications, we investigate drag reduction in laminar pressure-driven flows in channels with streamwise-periodic superhydrophobic surfaces (SHSs) contaminated with soluble surfactant. We develop a model in the long-wave and weak-diffusion limit, where the streamwise SHS period is large compared to the channel height and the Péclet number is large. Using asymptotic and nu…
▽ More
Motivated by microfluidic applications, we investigate drag reduction in laminar pressure-driven flows in channels with streamwise-periodic superhydrophobic surfaces (SHSs) contaminated with soluble surfactant. We develop a model in the long-wave and weak-diffusion limit, where the streamwise SHS period is large compared to the channel height and the Péclet number is large. Using asymptotic and numerical techniques, we determine the influence of surfactant on drag reduction in terms of the relative strength of advection, diffusion, Marangoni effects and bulk-surface exchange. In scenarios with strong exchange, the drag reduction exhibits a complex dependence on the thickness of the bulk-concentration boundary layer and surfactant strength. Strong Marangoni effects immobilise the interface through a linear surfactant distribution, whereas weak Marangoni effects yield a quasi-stagnant cap. The quasi-stagnant cap has an intricate structure with an upstream slip region, followed by intermediate inner regions, and a quasi-stagnant region that is mediated by weak bulk diffusion. The quasi-stagnant region differs from the immobile region of a classical stagnant cap, observed for instance in surfactant-laden air bubbles in water, by displaying weak slip. As exchange weakens, the bulk and interface decouple: the surfactant distribution is linear when the surfactant is strong, whilst it forms a classical stagnant cap when the surfactant is weak. The asymptotic solutions offer closed-form predictions of drag reduction across much of the parameter space, providing practical utility and enhancing understanding of surfactant dynamics in flows over SHSs.
△ Less
Submitted 21 February, 2025; v1 submitted 21 June, 2024;
originally announced June 2024.
-
Spectral approaches to stress relaxation in epithelial monolayers
Authors:
Natasha Cowley,
Christopher K. Revell,
Emma Johns,
Sarah Woolner,
Oliver E. Jensen
Abstract:
We investigate the viscoelastic relaxation to equilibrium of a disordered planar epithelium described using the cell vertex model. In its standard form, the model is formulated as coupled evolution equations for the locations of vertices of confluent polygonal cells. Exploiting the model's gradient-flow structure, we use singular-value decomposition to project modes of deformation of vertices onto…
▽ More
We investigate the viscoelastic relaxation to equilibrium of a disordered planar epithelium described using the cell vertex model. In its standard form, the model is formulated as coupled evolution equations for the locations of vertices of confluent polygonal cells. Exploiting the model's gradient-flow structure, we use singular-value decomposition to project modes of deformation of vertices onto modes of deformation of cells. We show how eigenmodes of discrete Laplacian operators (specified by constitutive assumptions related to dissipation and mechanical energy) provide a spatial basis for evolving fields, and demonstrate how the operators can incorporate approximations of conventional spatial derivatives. We relate the spectrum of relaxation times to the eigenvalues of the Laplacians, modified by corrections that account for the fact that the cell network (and therefore the Laplacians) evolve during relaxation to an equilibrium prestressed state, providing the monolayer with geometric stiffness. While dilational modes of the Laplacians capture rapid relaxation in some circumstances, showing diffusive dynamics, geometric stiffness is typically a dominant source of monolayer rigidity, as we illustrate for monolayers exposed to unsteady stretching deformations.
△ Less
Submitted 29 March, 2024;
originally announced April 2024.
-
Correction and standardisation of lung oscillometry techniques using parameter inference: A study group report
Authors:
Bindi S. Brook,
Graeham R. Douglas,
Oliver E. Jensen,
Sonal Mistry,
Sujit Kumar Nath,
Matthew J. Russell,
Sina Saffaran,
James Shemilt,
Liam Weaver,
Carl A. Whitfield
Abstract:
This report relates to a study group hosted by the EPSRC funded network, Integrating data-driven BIOphysical models into REspiratory MEdicine (BIOREME), and supported by The Insigneo Institute and The Knowledge Transfer Network. The BIOREME network hosts events, including this study group, to bring together multi-disciplinary researchers, clinicians, companies and charities to catalyse research in…
▽ More
This report relates to a study group hosted by the EPSRC funded network, Integrating data-driven BIOphysical models into REspiratory MEdicine (BIOREME), and supported by The Insigneo Institute and The Knowledge Transfer Network. The BIOREME network hosts events, including this study group, to bring together multi-disciplinary researchers, clinicians, companies and charities to catalyse research in the applications of mathematical modelling for respiratory medicine. The goal of this study group was to provide an interface between companies, clinicians, and mathematicians to develop mathematical tools to the problems presented. The study group was held at The University of Sheffield on the 17 - 20 April 2023 and was attended by 24 researchers from 13 different institutions.
This report relates to a challenge presented by Arete Medical Technologies relating to impulse oscillometry (IOS), whereby a short pressure oscillation is imposed at a person's mouth during normal breathing, usually by a loudspeaker. The resulting pressure and flow rate changes can be used to the impedance of the airways, which in turn can provide proxy measurements for (patho)physiological changes in the small airways. Disentangling the signal so that airway mechanics can be measured accurately (and device properties/environmental effects can be accounted for) remains an open challenge that has the potential to significantly improve the device and its translation to clinic. In this report, several approaches to this problem, and the wider problem of interpreting oscillometry resuts are explored.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
An optically pumped magnetic gradiometer for the detection of human biomagnetism
Authors:
Harry Cook,
Yulia Bezsudnova,
Lari M. Koponen,
Ole Jensen,
Giovanni Barontini,
Anna U. Kowalczyk
Abstract:
We realise an intrinsic optically pumped magnetic gradiometer based on non-linear magneto-optical rotation. We show that our sensor can reach a gradiometric sensitivity of 18 $\text{fT}/\text{cm}/\sqrt{\text{Hz}}$ and can reject common mode homogeneous magnetic field noise with up to 30 dB attenuation. We demonstrate that our magnetic field gradiometer is sufficiently sensitive and resilient to be…
▽ More
We realise an intrinsic optically pumped magnetic gradiometer based on non-linear magneto-optical rotation. We show that our sensor can reach a gradiometric sensitivity of 18 $\text{fT}/\text{cm}/\sqrt{\text{Hz}}$ and can reject common mode homogeneous magnetic field noise with up to 30 dB attenuation. We demonstrate that our magnetic field gradiometer is sufficiently sensitive and resilient to be employed in biomagnetic applications. In particular, we are able to record the auditory evoked response of the human brain, and to perform real-time magnetocardiography in the presence of external magnetic field disturbances. Our gradiometer provides complementary capabilities in human biomagnetic sensing to optically pumped magnetometers, and opens new avenues in the detection of human biomagnetism.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Exogenous-endogenous surfactant interaction yields heterogeneous spreading in complex branching networks
Authors:
Richard Mcnair,
Fernando Temprano-Coleto,
François J. Peaudecerf,
Frédéric Gibou,
Paolo Luzzatto-Fegiz,
Oliver E. Jensen,
Julien R. Landel
Abstract:
Experiments have shown that surfactant introduced to a liquid-filled maze can find the solution path. We reveal how the maze-solving dynamics arise from interactions between the added surfactant and endogenous surfactant present at the liquid surface. We simulate the dynamics using a nonlinear model solved with a discrete mimetic scheme on a graph. Endogenous surfactant transforms local spreading…
▽ More
Experiments have shown that surfactant introduced to a liquid-filled maze can find the solution path. We reveal how the maze-solving dynamics arise from interactions between the added surfactant and endogenous surfactant present at the liquid surface. We simulate the dynamics using a nonlinear model solved with a discrete mimetic scheme on a graph. Endogenous surfactant transforms local spreading into a non-local problem with an omniscient view of the maze geometry, key to the maze-solving dynamics. Our results offer insight into surfactant-driven transport in complex networks such as lung airways.
△ Less
Submitted 15 November, 2023; v1 submitted 14 November, 2023;
originally announced November 2023.
-
Unsteady evolution of slip and drag in surfactant-contaminated superhydrophobic channels
Authors:
Samuel D. Tomlinson,
Frédéric Gibou,
Paolo Luzzatto-Fegiz,
Fernando Temprano-Coleto,
Oliver E. Jensen,
Julien R. Landel
Abstract:
Recognising that surfactants can impede the drag reduction resulting from superhydrophobic surfaces (SHSs), we investigate the impact of spatio-temporal fluctuations in surfactant concentration on the drag-reduction properties of SHSs. We model the unsteady transport of soluble surfactant in a channel flow bounded by two SHSs. The flow is laminar, pressure-driven, and the SHSs are periodic in the…
▽ More
Recognising that surfactants can impede the drag reduction resulting from superhydrophobic surfaces (SHSs), we investigate the impact of spatio-temporal fluctuations in surfactant concentration on the drag-reduction properties of SHSs. We model the unsteady transport of soluble surfactant in a channel flow bounded by two SHSs. The flow is laminar, pressure-driven, and the SHSs are periodic in the streamwise and spanwise directions. We assume that the channel length is much longer than the streamwise period, the streamwise period is much longer than the channel height and spanwise period, and bulk diffusion is sufficiently strong for cross-channel concentration gradients to be small. By combining long-wave and homogenisation theories, we derive an unsteady advection-diffusion equation for surfactant-flux transport over the length of the channel, which is coupled to a quasi-steady advection-diffusion equation for surfactant transport over individual plastrons. As diffusion over the length of the channel is typically small, the surfactant flux is governed by a nonlinear wave equation. In the fundamental case of the transport of a bolus of surfactant, we predict its propagation speed and describe its nonlinear evolution via interaction with the SHS. The propagation speed can fall below the average streamwise velocity as the surfactant adsorbs and rigidifies the plastrons. Smaller concentrations of surfactant are advected faster than larger ones, so that wave-steepening effects can lead to shock formation in the surfactant-flux distribution. Our asymptotic results reveal how unsteady surfactant transport can affect the spatio-temporal evolution of the slip velocity, drag reduction and effective slip length in SHS channels.
△ Less
Submitted 22 February, 2024; v1 submitted 27 October, 2023;
originally announced October 2023.
-
Confinement-induced drift in Marangoni-driven transport of surfactant: a Lagrangian perspective
Authors:
Richard Mcnair,
Oliver E. Jensen,
Julien R. Landel
Abstract:
Successive drops of coloured ink mixed with surfactant are deposited onto a thin film of water to create marbling patterns in the Japanese art technique of Suminagashi. To understand the physics behind this and other applications where surfactant transports adsorbed passive matter at gas-liquid interfaces, we investigate the Lagrangian trajectories of material particles on the surface of a thin fi…
▽ More
Successive drops of coloured ink mixed with surfactant are deposited onto a thin film of water to create marbling patterns in the Japanese art technique of Suminagashi. To understand the physics behind this and other applications where surfactant transports adsorbed passive matter at gas-liquid interfaces, we investigate the Lagrangian trajectories of material particles on the surface of a thin film of a confined viscous liquid under Marangoni-driven spreading by an insoluble surfactant. We study a model problem in which several deposits of exogenous surfactant simultaneously spread on a bounded rectangular surface containing a pre-existing endogenous surfactant. We derive Eulerian and Lagrangian formulations of the equations governing the Marangoni-driven surface flow. Both descriptions show how confinement can induce drift and flow reversal during spreading. The Lagrangian formulation captures trajectories without the need to calculate surfactant concentrations; however, concentrations can still be inferred from the Jacobian of the map from initial to current particle position. We explore a link between thin-film surfactant dynamics and optimal transport theory to find the approximate equilibrium locations of material particles for any given initial condition by solving a Monge-Ampère equation. We find that, as the endogenous surfactant concentration $δ$ vanishes, the equilibrium shapes of deposits using the Monge-Ampère approximation approach polygons with corners curving in a self-similar manner over lengths scaling as $δ^{1/2}$. We explore how Suminagashi patterns may be produced by using computationally efficient successive solutions of the Monge-Ampère equation.
△ Less
Submitted 1 March, 2024; v1 submitted 14 October, 2023;
originally announced October 2023.
-
Bayesian parameter estimation for characterising mobile ion vacancies in perovskite solar cells
Authors:
Samuel G. McCallum,
Oliver Nicholls,
Kjeld O. Jensen,
Matthew V. Cowley,
James E. Lerpinière,
Alison B. Walker
Abstract:
To overcome the challenges associated with poor temporal stability of perovskite solar cells, methods are required that allow for fast iteration of fabrication and characterisation, such that optimal device performance and stability may be actively pursued. Currently, establishing the causes of underperformance is both complex and time-consuming, and optimisation of device fabrication thus inheren…
▽ More
To overcome the challenges associated with poor temporal stability of perovskite solar cells, methods are required that allow for fast iteration of fabrication and characterisation, such that optimal device performance and stability may be actively pursued. Currently, establishing the causes of underperformance is both complex and time-consuming, and optimisation of device fabrication thus inherently slow. Here, we present a means of computational device characterisation of mobile halide ion parameters from room temperature current-voltage (J-V) measurements only, requiring $\sim 2$ hours of computation on basic computing resources. With our approach, the physical parameters of the device may be reverse modelled from experimental J-V measurements. In a drift-diffusion model, the set of coupled drift-diffusion partial differential equations cannot be inverted explicitly, so a method for inverting the drift-diffusion simulation is required. We show how Bayesian Parameter Estimation (BPE) coupled with a drift-diffusion perovskite solar cell model can determine the extent to which device parameters affect performance measured by J-V characteristics. Our method is demonstrated by investigating the extent to which device performance is influenced by mobile halide ions for a specific fabricated device. The ion vacancy density $N_0$ and diffusion coefficient $D_I$ were found to be precisely characterised for both simulated and fabricated devices. This result opens up the possibility of pinpointing origins of degradation by finding which parameters most influence device J-V curves as the cell degrades.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
Iron Oxide Nanoparticles as a Contrast Agent for Synchrotron Imaging of Sperm
Authors:
Mette Bjerg Lindhøj,
Susan Rudd Cooper,
Andy S. Anker,
Anne Bonnin,
Mie Kristensen,
Klaus Qvortrup,
Kristian Almstrup,
Kirsten M. Ø. Jensen,
Tim B. Dyrby,
Jon Sporring
Abstract:
Fast phase-contrast imaging offered by modern synchrotron facilities opens the possibility of imaging dynamic processes of biological material such as cells. Cells are mainly composed of carbon and hydrogen, which have low X-ray attenuation, making cell studies with X-ray tomography challenging. At specific low energies, cells provide contrast, but cryo-conditions are required to protect the sampl…
▽ More
Fast phase-contrast imaging offered by modern synchrotron facilities opens the possibility of imaging dynamic processes of biological material such as cells. Cells are mainly composed of carbon and hydrogen, which have low X-ray attenuation, making cell studies with X-ray tomography challenging. At specific low energies, cells provide contrast, but cryo-conditions are required to protect the sample from radiation damage. Thus, non-toxic labelling methods are needed to prepare living cells for X-ray tomography at higher energies. We propose using iron oxide nanoparticles due to their proven compatibility in other biomedical applications. We show how to synthesize and attach iron oxide nanoparticles and demonstrate that cell-penetrating peptides facilitate iron oxide nanoparticle uptake into sperm cells. We show results from the TOMCAT Nanoscope (Swiss Light Source), showing that iron oxide nanoparticles allow the heads and midpiece of fixed sperm samples to be reconstructed from X-ray projections taken at 10 keV.
△ Less
Submitted 8 June, 2023;
originally announced September 2023.
-
Surfactant amplifies yield-stress effects in the capillary instability of a film coating a tube
Authors:
James D. Shemilt,
Alex Horsley,
Oliver E. Jensen,
Alice B. Thompson,
Carl A. Whitfield
Abstract:
To assess how the presence of surfactant in lung airways alters the flow of mucus that leads to plug formation and airway closure, we investigate the effect of insoluble surfactant on the instability of a viscoplastic liquid coating the interior of a cylindrical tube. Evolution equations for the layer thickness using thin-film and long-wave approximations are derived that incorporate yield-stress…
▽ More
To assess how the presence of surfactant in lung airways alters the flow of mucus that leads to plug formation and airway closure, we investigate the effect of insoluble surfactant on the instability of a viscoplastic liquid coating the interior of a cylindrical tube. Evolution equations for the layer thickness using thin-film and long-wave approximations are derived that incorporate yield-stress effects and capillary and Marangoni forces. Using numerical simulations and asymptotic analysis of the thin-film system, we quantify how the presence of surfactant slows growth of the Rayleigh-Plateau instability, increases the size of initial perturbation required to trigger instability and decreases the final peak height of the layer. When the surfactant strength is large, the thin-film dynamics coincide with the dynamics of a surfactant-free layer but with time slowed by a factor of four and the capillary Bingham number, a parameter proportional to the yield stress, exactly doubled. By solving the long-wave equations numerically, we quantify how increasing surfactant strength can increase the critical layer thickness for plug formation to occur and delay plugging. The previously established effect of the yield stress in suppressing plug formation [Shemilt et al., J. Fluid Mech., 2022, vol. 944, A22] is shown to be amplified by introducing surfactant. We discuss the implications of these results for understanding the impact of surfactant deficiency and increased mucus yield stress in obstructive lung diseases.
△ Less
Submitted 11 July, 2023; v1 submitted 3 April, 2023;
originally announced April 2023.
-
A model for slip and drag in turbulent flows over superhydrophobic surfaces with surfactant
Authors:
Samuel D. Tomlinson,
François Peaudecerf,
Fernando Temprano-Coleto,
Frederic Gibou,
Paolo Luzzatto-Fegiz,
Oliver E. Jensen,
Julien R. Landel
Abstract:
Superhydrophobic surfaces (SHSs) can reduce the friction drag in turbulent flows. In the laminar regime, it has been shown that trace amounts of surfactant can negate this drag reduction, at times rendering these surfaces no better than solid walls (Peaudecerf et al., Proc. Natl. Acad. Sci. USA 114(28), 7254-9, 2017). However, surfactant effects on the drag-reducing properties of SHSs have not yet…
▽ More
Superhydrophobic surfaces (SHSs) can reduce the friction drag in turbulent flows. In the laminar regime, it has been shown that trace amounts of surfactant can negate this drag reduction, at times rendering these surfaces no better than solid walls (Peaudecerf et al., Proc. Natl. Acad. Sci. USA 114(28), 7254-9, 2017). However, surfactant effects on the drag-reducing properties of SHSs have not yet been studied under turbulent flow conditions, where predicting the effects of surfactant in direct numerical simulations remains expensive by today's standards. We present a model for turbulent flow inclusive of surfactant, in either a channel or boundary-layer configuration, over long but finite-length streamwise ridges that are periodic in the spanwise direction, with period $P$ and gas fraction $\varphi$. We adopt a technique based on a shifted log law to acquire an expression for the drag reduction. The average streamwise and spanwise slip lengths are derived by introducing a local laminar model within the viscous sublayer, whereby the effect of surfactant is modelled by modifying the average streamwise and spanwise slip lengths. Our model agrees with available laboratory experimental data from the literature when conditions are clean (surfactant-free), or when there are low surfactant levels. However, we find an appreciable drag increase for larger background surfactant concentrations that are characteristic of turbulent flows over SHSs for marine applications.
△ Less
Submitted 3 February, 2023;
originally announced February 2023.
-
Laminar drag reduction in surfactant-contaminated superhydrophobic channels
Authors:
Samuel D. Tomlinson,
Frédéric Gibou,
Paolo Luzzatto-Fegiz,
Fernando Temprano-Coleto,
Oliver E. Jensen,
Julien R. Landel
Abstract:
While superhydrophobic surfaces (SHSs) show promise for drag reduction applications, their performance can be compromised by traces of surfactant, which generate Marangoni stresses that increase drag. This question is addressed for soluble surfactant in a three-dimensional laminar channel flow, with periodic SHSs on both walls. We assume that diffusion is sufficiently strong for cross-channel conc…
▽ More
While superhydrophobic surfaces (SHSs) show promise for drag reduction applications, their performance can be compromised by traces of surfactant, which generate Marangoni stresses that increase drag. This question is addressed for soluble surfactant in a three-dimensional laminar channel flow, with periodic SHSs on both walls. We assume that diffusion is sufficiently strong for cross-channel concentration gradients to be small. Exploiting a long-wave theory that accounts for a rapid transverse Marangoni-driven flow, we derive a one-dimensional model for surfactant evolution, which allows us to predict the drag reduction across the parameter space. The system exhibits multiple regimes, involving competition between Marangoni effects, bulk and interfacial diffusion, advection and shear dispersion. We map out asymptotic regions in the high-dimensional parameter space, deriving approximations of the drag reduction in each region and comparing them to numerical simulations. Our atlas of maps provides a comprehensive analytical guide for designing surfactant-contaminated channels with SHSs, to maximise the drag reduction in applications.
△ Less
Submitted 27 March, 2023; v1 submitted 11 September, 2022;
originally announced September 2022.
-
Surface-tension-driven evolution of a viscoplastic liquid coating the interior of a cylindrical tube
Authors:
James Shemilt,
Alexander Horsley,
Oliver Jensen,
Alice Thompson,
Carl Whitfield
Abstract:
One mechanism for airway closure in the lung is the surface-tension-driven instability of the mucus layer which lines the airway wall. We study the instability of an axisymmetric layer of viscoplastic Bingham liquid coating the interior of a rigid tube, which is a simple model for an airway that takes into account the yield stress of mucus. An evolution equation for the thickness of the liquid lay…
▽ More
One mechanism for airway closure in the lung is the surface-tension-driven instability of the mucus layer which lines the airway wall. We study the instability of an axisymmetric layer of viscoplastic Bingham liquid coating the interior of a rigid tube, which is a simple model for an airway that takes into account the yield stress of mucus. An evolution equation for the thickness of the liquid layer is derived using long-wave theory, from which we also derive a simpler thin-film evolution equation. In the thin-film case, we show that two branches of marginally-yielded static solutions of the evolution equation can be used to both predict the size of initial perturbation required to trigger instability and quantify how increasing the capillary Bingham number (a parameter measuring yield stress relative to surface tension) reduces the final deformation of the layer. Using numerical solutions of the long-wave evolution equation, we quantify how the critical layer thickness required to form a liquid plug in the tube increases as the capillary Bingham number is increased. We discuss the significance of these findings for modelling airway closure in obstructive conditions such as cystic fibrosis, where the mucus layer is often thicker and has a higher yield stress.
△ Less
Submitted 17 May, 2022; v1 submitted 22 February, 2022;
originally announced February 2022.
-
Advection-dominated transport past isolated disordered sinks: stepping beyond homogenization
Authors:
George F. Price,
Igor L. Chernyavsky,
Oliver E. Jensen
Abstract:
We investigate the transport of a solute past isolated sinks in a bounded domain when advection is dominant over diffusion, evaluating the effectiveness of homogenization approximations when sinks are distributed uniformly randomly in space. Corrections to such approximations can be non-local, non-smooth and non-Gaussian, depending on the physical parameters (a Péclet number Pe, assumed large, and…
▽ More
We investigate the transport of a solute past isolated sinks in a bounded domain when advection is dominant over diffusion, evaluating the effectiveness of homogenization approximations when sinks are distributed uniformly randomly in space. Corrections to such approximations can be non-local, non-smooth and non-Gaussian, depending on the physical parameters (a Péclet number Pe, assumed large, and a Damköhler number Da) and the compactness of the sinks. In one spatial dimension, solute distributions develop a staircase structure for large Pe, with corrections being better described with credible intervals than with traditional moments. In two and three dimensions, solute distributions are near-singular at each sink (and regularized by sink size), but their moments can be smooth as a result of ensemble averaging over variable sink locations. We approximate corrections to a homogenization approximation using a moment-expansion method, replacing the Green's function by its free-space form, and test predictions against simulation. We show how, in two or three dimensions, the leading-order impact of disorder can be captured in a homogenization approximation for the ensemble mean concentration through a modification to Da that grows with diminishing sink size.
△ Less
Submitted 13 April, 2022; v1 submitted 12 January, 2022;
originally announced January 2022.
-
The effect of isolated ridges and grooves on static menisci in rectangular channels
Authors:
Eleanor C. Johnstone,
Andrew L. Hazel,
Oliver E. Jensen
Abstract:
We present theoretical and numerical results that demonstrate the sensitivity of the shape of a static meniscus in a rectangular channel to localised geometric perturbations in the form of narrow ridges and grooves imposed on the channel walls. The Young--Laplace equation is solved for a gas/liquid interface with fixed contact angle using computations, analytical arguments and semi-analytical solu…
▽ More
We present theoretical and numerical results that demonstrate the sensitivity of the shape of a static meniscus in a rectangular channel to localised geometric perturbations in the form of narrow ridges and grooves imposed on the channel walls. The Young--Laplace equation is solved for a gas/liquid interface with fixed contact angle using computations, analytical arguments and semi-analytical solutions of a linearised model for small-amplitude perturbations. We find that the local deformation of the meniscus's contact line near a ridge or groove is strongly dependent on the shape of the perturbation. In particular, small-amplitude perturbations that change the channel volume induce a change in the pressure difference across the meniscus, resulting in long-range curvature of its contact line. We derive an explicit expression for this induced pressure difference directly in terms of the boundary data. We show how contact lines can be engineered to assume prescribed patterns using suitable combinations of ridges and grooves.
△ Less
Submitted 4 January, 2022; v1 submitted 24 May, 2021;
originally announced May 2021.
-
Surfactant spreading in a two-dimensional cavity and emergent contact-line singularities
Authors:
Richard Mcnair,
Oliver E. Jensen,
Julien R. Landel
Abstract:
We model the advective Marangoni spreading of insoluble surfactant at the free surface of a viscous fluid that is confined within a two-dimensional rectangular cavity. Interfacial deflections are assumed small, with contact lines pinned to the walls of the cavity, and inertia is neglected. Linearizing the surfactant transport equation about the equilibrium state allows a modal decomposition of the…
▽ More
We model the advective Marangoni spreading of insoluble surfactant at the free surface of a viscous fluid that is confined within a two-dimensional rectangular cavity. Interfacial deflections are assumed small, with contact lines pinned to the walls of the cavity, and inertia is neglected. Linearizing the surfactant transport equation about the equilibrium state allows a modal decomposition of the dynamics, with eigenvalues corresponding to decay rates of perturbations. Computation of the family of mutually orthogonal two-dimensional eigenfunctions reveals singular flow structures near each contact line, resulting in spatially oscillatory patterns of wall shear stress and a pressure field that diverges logarithmically. These singularities at a stationary contact line are associated with dynamic compression of the surfactant monolayer; we show how they can be regularized by weak surface diffusion. Their existence highlights the need for careful treatment in computations of unsteady advection-dominated surfactant transport in confined domains.
△ Less
Submitted 9 September, 2021; v1 submitted 21 May, 2021;
originally announced May 2021.
-
Force networks, torque balance and Airy stress in the planar vertex model of a confluent epithelium
Authors:
Oliver E. Jensen,
Emma Johns,
Sarah Woolner
Abstract:
The vertex model is a popular framework for modelling tightly packed biological cells, such as confluent epithelia. Cells are described by convex polygons tiling the plane and their equilibrium is found by minimizing a global mechanical energy, with vertex locations treated as degrees of freedom. Drawing on analogies with granular materials, we describe the force network for a localized monolayer…
▽ More
The vertex model is a popular framework for modelling tightly packed biological cells, such as confluent epithelia. Cells are described by convex polygons tiling the plane and their equilibrium is found by minimizing a global mechanical energy, with vertex locations treated as degrees of freedom. Drawing on analogies with granular materials, we describe the force network for a localized monolayer and derive the corresponding discrete Airy stress function, expressed for each $N$-sided cell as $N$ scalars defined over kites covering the cell. We show how a torque balance (commonly overlooked in implementations of the vertex model) requires each internal vertex to lie at the orthocentre of the triangle formed by neighbouring edge centroids. Torque balance also places a geometric constraint on the stress in the neighbourhood of cellular trijunctions, and requires cell edges to be orthogonal to the links of a dual network that connect neighbouring cell centres and thereby triangulate the monolayer. We show how the Airy stress function depends on cell shape when a standard energy functional is adopted, and discuss implications for computational implementations of the model.
△ Less
Submitted 2 April, 2020; v1 submitted 23 October, 2019;
originally announced October 2019.
-
Quantifying the impact of tissue metabolism on solute transport in feto-placental microvascular networks
Authors:
Alexander Erlich,
Gareth A. Nye,
Paul Brownbill,
Oliver E. Jensen,
Igor L. Chernyavsky
Abstract:
The primary exchange units in the human placenta are terminal villi, in which fetal capillary networks are surrounded by a thin layer of villous tissue, separating fetal from maternal blood. To understand how the complex spatial structure of villi influences their function, we use an image-based theoretical model to study the effect of tissue metabolism on the transport of solutes from maternal bl…
▽ More
The primary exchange units in the human placenta are terminal villi, in which fetal capillary networks are surrounded by a thin layer of villous tissue, separating fetal from maternal blood. To understand how the complex spatial structure of villi influences their function, we use an image-based theoretical model to study the effect of tissue metabolism on the transport of solutes from maternal blood into the fetal circulation. For solute that is taken up under first-order kinetics, we show that the transition between flow-limited and diffusion-limited transport depends on two new dimensionless parameters defined in terms of key geometric quantities, with strong solute uptake promoting flow-limited transport conditions. We present a simple algebraic approximation for solute uptake rate as a function of flow conditions, metabolic rate and villous geometry. For oxygen, accounting for nonlinear kinetics using physiological parameter values, our model predicts that villous metabolism does not significantly impact oxygen transfer to fetal blood, although the partitioning of fluxes between the villous tissue and the capillary network depends strongly on the flow regime.
△ Less
Submitted 21 May, 2019; v1 submitted 22 February, 2019;
originally announced February 2019.
-
Physical and geometric determinants of transport in feto-placental microvascular networks
Authors:
Alexander Erlich,
Philip Pearce,
Romina Plitman Mayo,
Oliver E. Jensen,
Igor L. Chernyavsky
Abstract:
Across mammalian species, solute exchange takes place in complex microvascular networks. In the human placenta, the primary exchange units are terminal villi that contain disordered networks of fetal capillaries and are surrounded externally by maternal blood. Here we show how the irregular internal structure of a terminal villus determines its exchange capacity for a wide range of solutes. Distil…
▽ More
Across mammalian species, solute exchange takes place in complex microvascular networks. In the human placenta, the primary exchange units are terminal villi that contain disordered networks of fetal capillaries and are surrounded externally by maternal blood. Here we show how the irregular internal structure of a terminal villus determines its exchange capacity for a wide range of solutes. Distilling geometric features into three scalar parameters, obtained from image analysis and computational fluid dynamics, we capture archetypal features of the the structure-function relationship of terminal villi using a simple algebraic approximation, revealing transitions between flow- and diffusion-limited transport at vessel and network levels. Our theory accommodates countercurrent effects, incorporates nonlinear blood rheology and offers an efficient method for testing network robustness. Our results show how physical estimates of solute transport, based on carefully defined geometrical statistics, provide a viable method for linking placental structure and function, and offer a framework for assessing transport in other microvascular systems.
△ Less
Submitted 12 February, 2019; v1 submitted 3 September, 2018;
originally announced September 2018.
-
Mechanical characterization of disordered and anisotropic cellular monolayers
Authors:
Alexander Nestor-Bergmann,
Emma Johns,
Sarah Woolner,
Oliver E. Jensen
Abstract:
We consider a cellular monolayer, described using a vertex-based model, for which cells form a spatially disordered array of convex polygons that tile the plane. Equilibrium cell configurations are assumed to minimize a global energy defined in terms of cell areas and perimeters; energy is dissipated via dynamic area and length changes, as well as cell neighbour exchanges. The model captures our o…
▽ More
We consider a cellular monolayer, described using a vertex-based model, for which cells form a spatially disordered array of convex polygons that tile the plane. Equilibrium cell configurations are assumed to minimize a global energy defined in terms of cell areas and perimeters; energy is dissipated via dynamic area and length changes, as well as cell neighbour exchanges. The model captures our observations of an epithelium from a Xenopus embryo showing that uniaxial stretching induces spatial ordering, with cells under net tension (compression) tending to align with (against) the direction of stretch, but with the stress remaining heterogeneous at the single-cell level. We use the vertex model to derive the linearized relation between tissue-level stress, strain and strain-rate about a deformed base state, which can be used to characterize the tissue's anisotropic mechanical properties; expressions for viscoelastic tissue moduli are given as direct sums over cells. When the base state is isotropic, the model predicts that tissue properties can be tuned to a regime with high elastic shear resistance but low resistance to area changes, or vice versa.
△ Less
Submitted 24 February, 2018; v1 submitted 8 November, 2017;
originally announced November 2017.
-
Drop spreading and drifting on a spatially heterogeneous film: capturing variability with asymptotics and emulation
Authors:
Feng Xu,
Sam Coveney,
Oliver E. Jensen
Abstract:
A liquid drop spreading over a thin heterogeneous precursor film (such as an inhaled droplet on the mucus-lined wall of a lung airway) will experience perturbations in shape and location as its advancing contact line encounters regions of low or high film viscosity. Prior work on spatially one-dimensional spreading over a precursor film having a random viscosity field [Xu & Jensen 2016, Proc. Roy.…
▽ More
A liquid drop spreading over a thin heterogeneous precursor film (such as an inhaled droplet on the mucus-lined wall of a lung airway) will experience perturbations in shape and location as its advancing contact line encounters regions of low or high film viscosity. Prior work on spatially one-dimensional spreading over a precursor film having a random viscosity field [Xu & Jensen 2016, Proc. Roy. Soc. A 472, 20160270] has demonstrated how viscosity fluctuations are swept into a narrow region behind the contact line, where they can impact drop dynamics. Here we investigate two-dimensional drops, seeking to understand the relationship between the statistical properties of the precursor film and those of the spreading drop. Assuming the precursor film is much thinner than the drop and viscosity fluctuations are weak, we use asymptotic methods to derive explicit predictions for the mean and variance of drop area and the drop's lateral drift. For larger film variability, we use Gaussian process emulation to estimate the variance of outcomes from a restricted set of simulations. Stochastic drift of the droplet is predicted to be greatest when the initial drop diameter is comparable to the correlation length of viscosity fluctuations.
△ Less
Submitted 1 April, 2018; v1 submitted 21 June, 2017;
originally announced June 2017.
-
Trapping and displacement of liquid collars and plugs in rough-walled tubes
Authors:
Feng Xu,
Oliver E. Jensen
Abstract:
A liquid film wetting the interior of a long circular cylinder redistributes under the action of surface tension to form annular collars or occlusive plugs. These equilibrium structures are invariant under axial translation within a perfectly smooth uniform tube and therefore can be displaced axially by very weak external forcing. We consider how this degeneracy is disrupted when the tube wall is…
▽ More
A liquid film wetting the interior of a long circular cylinder redistributes under the action of surface tension to form annular collars or occlusive plugs. These equilibrium structures are invariant under axial translation within a perfectly smooth uniform tube and therefore can be displaced axially by very weak external forcing. We consider how this degeneracy is disrupted when the tube wall is rough, and determine threshold conditions under which collars or plugs resist displacement under forcing. Wall roughness is modelled as a non-axisymmetric Gaussian random field of prescribed correlation length and small variance, mimicking some of the geometric irregularities inherent in applications such as lung airways. The thin film coating this surface is modelled using lubrication theory. When the roughness is weak, we show how the locations of equilibrium collars and plugs can be identified in terms of the azimuthally averaged tube radius; we derive conditions specifying equilibrium collar locations under an externally imposed shear flow, and plug locations under an imposed pressure gradient. We use these results to determine the probability of external forcing being sufficient to displace a collar or plug from a rough-walled tube, when the tube roughness is defined only in statistical terms.
△ Less
Submitted 23 August, 2017; v1 submitted 30 April, 2017;
originally announced May 2017.
-
Relating cell shape and mechanical stress in a spatially disordered epithelium using a vertex-based model
Authors:
Alexander Nestor-Bergmann,
Georgina Goddard,
Sarah Woolner,
Oliver Jensen
Abstract:
Using a popular vertex-based model to describe a spatially disordered planar epithelial monolayer, we examine the relationship between cell shape and mechanical stress at the cell and tissue level. Deriving expressions for stress tensors starting from an energetic formulation of the model, we show that the principal axes of stress for an individual cell align with the principal axes of shape, and…
▽ More
Using a popular vertex-based model to describe a spatially disordered planar epithelial monolayer, we examine the relationship between cell shape and mechanical stress at the cell and tissue level. Deriving expressions for stress tensors starting from an energetic formulation of the model, we show that the principal axes of stress for an individual cell align with the principal axes of shape, and we determine the bulk effective tissue pressure when the monolayer is isotropic at the tissue level. Using simulations for a monolayer that is not under peripheral stress, we fit parameters of the model to experimental data for Xenopus embryonic tissue. The model predicts that mechanical interactions can generate mesoscopic patterns within the monolayer that exhibit long-range correlations in cell shape. The model also suggests that the orientation of mechanical and geometric cues for processes such as cell division are likely to be strongly correlated in real epithelia. Some limitations of the model in capturing geometric features of Xenopus epithelial cells are highlighted.
△ Less
Submitted 10 May, 2017; v1 submitted 15 November, 2016;
originally announced November 2016.
-
Drop spreading with random viscosity
Authors:
Feng Xu,
Oliver E. Jensen
Abstract:
We examine theoretically the spreading of a viscous liquid drop over a thin film of uniform thickness, assuming the liquid's viscosity is regulated by the concentration of a solute that is carried passively by the spreading flow. The solute is assumed to be initially heterogeneous, having a spatial distribution with prescribed statistical features. To examine how this variability influences the dr…
▽ More
We examine theoretically the spreading of a viscous liquid drop over a thin film of uniform thickness, assuming the liquid's viscosity is regulated by the concentration of a solute that is carried passively by the spreading flow. The solute is assumed to be initially heterogeneous, having a spatial distribution with prescribed statistical features. To examine how this variability influences the drop's motion, we investigate spreading in a planar geometry using lubrication theory, combining numerical simulations with asymptotic analysis. We assume diffusion is sufficient to suppress solute concentration gradients across but not along the film. The solute field beneath the bulk of the drop is stretched by the spreading flow, such that the initial solute concentration immediately behind the drop's effective contact lines has a long-lived influence on the spreading rate. Over long periods, solute swept up from the precursor film accumulates in a short region behind the contact line, allowing patches of elevated viscosity within the precursor film to hinder spreading. A low-order model provides explicit predictions of the variances in spreading rate and drop location, which are validated against simulations.
△ Less
Submitted 18 August, 2016;
originally announced August 2016.
-
Fluctuation-Enhanced Sensing for Biological Agent Detection and Identification
Authors:
Laszlo B. Kish,
Hung C. Chang,
Maria D. King,
Chiman Kwan,
James O. Jensen,
Gabor Schmera,
Janusz Smulko,
Zoltan Gingl,
Claes G. Granqvist
Abstract:
We survey and show our earlier results about three different ways of fluctuation-enhanced sensing of bio agent, the phage-based method for bacterium detection published earlier; sensing and evaluating the odors of microbes; and spectral and amplitude distribution analysis of noise in light scattering to identify spores based on their diffusion coefficient.
We survey and show our earlier results about three different ways of fluctuation-enhanced sensing of bio agent, the phage-based method for bacterium detection published earlier; sensing and evaluating the odors of microbes; and spectral and amplitude distribution analysis of noise in light scattering to identify spores based on their diffusion coefficient.
△ Less
Submitted 29 July, 2010; v1 submitted 28 December, 2009;
originally announced December 2009.
