-
Planar Waveguide Circulating Gaussian Beam Resonators on a Silicon Photonic Chip
Authors:
Siegfried Janz,
Shurui Wang,
Rubin Ma,
Jean Lapointe,
Martin Vachon
Abstract:
A Si slab waveguide resonator design with a circulating Gaussian-like cavity mode is described and characterized, for both all-pass and add-drop configurations and several different input/output coupling strengths. The circulating beam propagates in a slab waveguide with no lateral confinement. Three straight mirrors and one curved mirror define a folded two-dimensional Gaussian cavity. Light is c…
▽ More
A Si slab waveguide resonator design with a circulating Gaussian-like cavity mode is described and characterized, for both all-pass and add-drop configurations and several different input/output coupling strengths. The circulating beam propagates in a slab waveguide with no lateral confinement. Three straight mirrors and one curved mirror define a folded two-dimensional Gaussian cavity. Light is coupled to and from the resonator by beam splitters formed by a narrow gap between a cavity mirror and the input slab waveguides. The coupling is determined by the gap width and is wavelength independent and lossless. For a L=100 um path length cavity, resonance line widths of 5 pm with Q-values of Q = 310000 were measured. The resonator drop spectrum exhibited a comb of almost identical resonance lines across a 100 nm tuning range. This resonator design is capable of broadband operation and is less susceptible to sidewall roughness and defect scattering induced loss and mode splitting, when compared with Si rings formed from narrow single mode waveguides.
△ Less
Submitted 30 July, 2025;
originally announced July 2025.
-
Experimental demonstration of photonic phase correctors based on grating coupler arrays and thermo-optic shifters
Authors:
Momen Diab,
Ross Cheriton,
Jacob Taylor,
Dhwanil Patel,
Libertad Rojas,
Mark Barnet,
Polina Zavyalova,
Dan-Xia Xu,
Pavel Cheben,
Siegfried Janz,
Jens H. Schmid,
Suresh Sivanandam
Abstract:
In ground-based astronomy, the ability to couple light into single-mode fibers (SMFs) is limited by atmospheric turbulence, which prohibits the use of many astrophotonic instruments. We propose a silicon-on-insulator photonic chip capable of coherently coupling the out-of-phase beamlets from the subapertures of a telescope pupil into an SMF. The photonic integrated circuit (PIC) consists of an arr…
▽ More
In ground-based astronomy, the ability to couple light into single-mode fibers (SMFs) is limited by atmospheric turbulence, which prohibits the use of many astrophotonic instruments. We propose a silicon-on-insulator photonic chip capable of coherently coupling the out-of-phase beamlets from the subapertures of a telescope pupil into an SMF. The photonic integrated circuit (PIC) consists of an array of grating couplers that are used to inject light from free space into single-mode waveguides on the chip. Metallic heaters modulate the refractive index of a coiled section of the waveguides, facilitating the co-phasing of the propagating modes. The phased beamlets can then be coherently combined to efficiently deliver the light to an output SMF. In an adaptive optics (AO) system, the phase corrector acts as a deformable mirror (DM) commanded by a controller that takes phase measurements from a wavefront sensor (WFS). We present experimental results for the PIC tested on an AO testbed and compare the performance to simulations.
△ Less
Submitted 14 August, 2024;
originally announced August 2024.
-
Integrated astrophotonic phase control for high resolution optical interferometry
Authors:
Ross Cheriton,
Siegfried Janz,
Glen Herriot,
Jean-Pierre Véran,
Brent Carlson
Abstract:
Long baseline optical interferometry and aperture synthesis using ground-based telescopes can enable unprecedented angular resolution astronomy in the optical domain. However, atmospheric turbulence leads to large, dynamic phase errors between participating apertures that limit fringe visibility using telescopes arrays or subaperture configurations in a single large telescope. Diffraction limited…
▽ More
Long baseline optical interferometry and aperture synthesis using ground-based telescopes can enable unprecedented angular resolution astronomy in the optical domain. However, atmospheric turbulence leads to large, dynamic phase errors between participating apertures that limit fringe visibility using telescopes arrays or subaperture configurations in a single large telescope. Diffraction limited optics or adaptive optics can be used to ensure coherence at each aperture, but correlating the phase between apertures requires high speed, high stroke phase correction and recombination that is extremely challenging and costly. As a solution, we show an alternative phase correction and beam combination method using a centimeter-scale silicon astrophotonic chip optimized for H-band operation. The 4.7x10mm silicon photonic chip is fabricated using electron beam lithography with devices with 2 up to 32 independent channels. Light is coupled into the chip using single mode fiber ribbons. An array of microheaters is used to individually tune the effective index of each spiral delay waveguides. Narrowband spectral splitters at each spatial channel divert a modulated digital reference signal from an artificial guide star off-chip for phase measurement. Science light from other wavelengths is coherently combined using on-chip beam combiners and outputted to a single waveguide. We described the role, design, fabrication and characterization of the photonic chip. This photonic phase control scheme can be applied in astronomical interferometry or optical satellite communications.
△ Less
Submitted 12 August, 2024;
originally announced August 2024.
-
End-to-end simulations of photonic phase correctors for adaptive optics systems
Authors:
Dhwanil Patel,
Momen Diab,
Ross Cheriton,
Jacob Taylor,
Libertad Rojas,
Martin Vachon,
Dan-Xia Xu,
Jens H. Schmid,
Pavel Cheben,
Siegfried Janz,
Suresh Sivanandam
Abstract:
Optical beams and starlight distorted by atmospheric turbulence can be corrected with adaptive optics systems to enable efficient coupling into single-mode fibers. Deformable mirrors, used to flatten the wavefront in astronomical telescopes, are costly, sensitive, and complex mechanical components that require careful calibration to enable high-quality imaging in astronomy, microscopy, and vision…
▽ More
Optical beams and starlight distorted by atmospheric turbulence can be corrected with adaptive optics systems to enable efficient coupling into single-mode fibers. Deformable mirrors, used to flatten the wavefront in astronomical telescopes, are costly, sensitive, and complex mechanical components that require careful calibration to enable high-quality imaging in astronomy, microscopy, and vision science. They are also impractical to deploy in large numbers for non-imaging applications like free-space optical communication. Here, we propose a photonic integrated c rcuit capable of spatially sampling the wavefront collected by the telescope and co-phasing the subapertures to maximize the flux delivered to an output single-mode fiber as the integrated photonic implementation of a deformable mirror. We present the results of end-to-end simulations to quantify the performance of the proposed photonic solution under varying atmospheric conditions toward realizing an adaptive optics system without a deformable mirror for free-space optical receivers.
△ Less
Submitted 15 July, 2024;
originally announced July 2024.
-
Perfectly vertical silicon metamaterial grating couplers with large segmentation periods up to 650 nm
Authors:
Jianhao Zhang,
Daniele Melati,
Yuri Grinberg,
Martin Vachon,
Shurui Wang,
Muhammad Al-Digeil,
Siegfried Janz,
Jens H. Schmid,
Pavel Cheben,
Dan-Xia Xu
Abstract:
Perfectly vertical grating couplers leveraging metamaterials can achieve both high coupling efficiency and minimal back reflection. The fabricability of these designs, with segmentations in both the longitudinal and transverse dimensions, hinges on the minimum feature size offered by cutting-edge fabrication technologies. In this work we present both numerical and experimental evidence that high p…
▽ More
Perfectly vertical grating couplers leveraging metamaterials can achieve both high coupling efficiency and minimal back reflection. The fabricability of these designs, with segmentations in both the longitudinal and transverse dimensions, hinges on the minimum feature size offered by cutting-edge fabrication technologies. In this work we present both numerical and experimental evidence that high performance devices can be obtained while using large transverse segmentation periods of up to 650 nm, thereby increasing the critical feature sizes. For single-step etched couplers produced on the 220 nm silicon-on-insulator platform, we demonstrate coupling efficiencies of nearly 50% in the C-band and remarkably low back reflections of -22 dB at zero-degree incidence angle. Notably, the duty cycles used in our optimized designs deviate significantly from those predicted by traditional effective medium models, even for small periods. Our findings promise to expand the range of optical properties achievable in metamaterials and offer fresh insights into the fine-tuning of nanophotonic devices.
△ Less
Submitted 1 November, 2024; v1 submitted 18 November, 2023;
originally announced November 2023.
-
Optical wavefront phase-tilt measurement using Si-photonic waveguide grating couplers
Authors:
Siegfried Janz,
Dan-Xia Xu,
Yuri Grinberg,
Shurui Wang,
Martin Vachon,
Pavel Cheben,
Jens H. Schmid,
Daniele Melati
Abstract:
Silicon photonic wavefront phase-tilt sensors for wavefront monitoring using surface coupling grating arrays are demonstrated. The first design employs the intrinsic angle dependence of the grating coupling efficiency to determine local wavefront tilt, with a measured sensitivity of 7 dB/degree. A second design connects four gratings in an interferometric waveguide circuit to determine incident wa…
▽ More
Silicon photonic wavefront phase-tilt sensors for wavefront monitoring using surface coupling grating arrays are demonstrated. The first design employs the intrinsic angle dependence of the grating coupling efficiency to determine local wavefront tilt, with a measured sensitivity of 7 dB/degree. A second design connects four gratings in an interferometric waveguide circuit to determine incident wavefront phase variation across the sensor area. In this device, one fringe spacing corresponds to approximately 2 degree wavefront tilt change. These sensor elements can sample a wavefront incident on the chip surface without the use of bulk optic elements, fiber arrays, or imaging arrays. Both sensor elements are less than 60 um across, and can be combined into larger arrays to monitor wavefront tilt and distortion across an image or pupil plane in adaptive optics systems for free space optical communications, astronomy and beam pointing applications.
△ Less
Submitted 20 September, 2023;
originally announced September 2023.
-
Measurement Accuracy in Silicon Photonic Ring Resonator Thermometers: Identifying and Mitigating Intrinsic Impairments
Authors:
Siegfried Janz,
Sergey Dedyulin,
D. -X. Xu,
Martin Vachon,
Shurui Wang,
Ross Cheriton,
John Weber
Abstract:
Silicon photonic ring resonator thermometers have been shown to provide temperature measurements with a 10 mK accuracy. In this work we identify and quantify the intrinsic on-chip impairments that may limit further improvement in temperature measurement accuracy. The impairments arise from optically induced changes in the waveguide effective index, and from back-reflections and scattering at defec…
▽ More
Silicon photonic ring resonator thermometers have been shown to provide temperature measurements with a 10 mK accuracy. In this work we identify and quantify the intrinsic on-chip impairments that may limit further improvement in temperature measurement accuracy. The impairments arise from optically induced changes in the waveguide effective index, and from back-reflections and scattering at defects and interfaces inside the ring cavity and along the path between light source and detector. These impairments are characterized for 220 x 500 nm Si waveguide rings by experimental measurement in a calibrated temperature bath and by phenomenological models of ring response. At different optical power levels both positive and negative light induced resonance shifts are observed. For a ring with L = 100 um cavity length, the self-heating induced resonance red shift can alter the temperature reading by 200 mK at 1 mW incident power, while a small blue shift is observed below 100 uW. The effect of self-heating is shown to be effectively suppressed by choosing longer ring cavities. Scattering and back-reflections often produce split and distorted resonance line shapes. Although these distortions can vary with resonance order, they are almost completely invariant with temperature for a given resonance and do not lead to measurement errors in themselves. The effect of line shape distortions can largely be mitigated by tracking only selected resonance orders with negligible shape distortion, and by measuring the resonance minimum wavelength directly, rather than attempting to fit the entire resonance line shape. The results demonstrate the temperature error due to these impairments can be limited to below the 3 mK level through appropriate design choices and measurement procedures.
△ Less
Submitted 27 June, 2023;
originally announced June 2023.
-
Athermal and tunable echelle grating wavelength demultiplexers using a Mach-Zehnder interferometer launch structure
Authors:
Daniele Melati,
Dan-Xia Xu,
Ross Cheriton,
Shurui Wang,
Martin Vachon,
Jens H. Schmid,
Pavel Cheben,
Siegfried Janz
Abstract:
We present a comparative experimental study of three silicon photonic echelle grating demultiplexers that are integrated with a Mach-Zehnder interferometer (MZI) launch structure. By appropriate choice of the MZI configuration, the temperature induced shift of the demultiplexer channel wavelengths can be suppressed (athermal) or enhanced (super-thermal), or be controlled by an on-chip micro-heater…
▽ More
We present a comparative experimental study of three silicon photonic echelle grating demultiplexers that are integrated with a Mach-Zehnder interferometer (MZI) launch structure. By appropriate choice of the MZI configuration, the temperature induced shift of the demultiplexer channel wavelengths can be suppressed (athermal) or enhanced (super-thermal), or be controlled by an on-chip micro-heater. The latter two configurations allow the channel wavelengths to be actively tuned using lower power than possible by temperature tuning a conventional echelle demultiplexer. In the athermal configuration, the measured channel spectral shift is reduced to less than 10 pm/C, compared to the 83 pm/C shift for an unmodified echelle device. In super-thermal operation an enhanced channel temperature tuning rate of 170 pm/C is achieved. Finally, by modulating the MZI phase with an on-chip heater, the demultiplexer channels can be actively tuned to correct for ambient temperature fluctuations up to 20 C, using a drive current of less than 20 mA.
△ Less
Submitted 7 January, 2022;
originally announced January 2022.
-
arXiv:2107.04494
[pdf]
astro-ph.IM
physics.app-ph
physics.ins-det
physics.optics
physics.space-ph
Fibre Fabry-Pérot Astrophotonic Correlation Spectroscopy for Remote Gas Identification and Radial Velocity Measurements
Authors:
Ross Cheriton,
Adam Densmore,
Suresh Sivanandam,
Ernst De Mooij,
Pavel Cheben,
Dan-Xia Xu,
Jens H. Schmid,
Siegfried Janz
Abstract:
We present a novel remote gas detection and identification technique based on correlation spectroscopy with a piezoelectric tunable fibre-optic Fabry-Pérot filter. We show that the spectral correlation amplitude between the filter transmission window and gas absorption features is related to the gas absorption optical depth, and that different gases can be distinguished from one another using thei…
▽ More
We present a novel remote gas detection and identification technique based on correlation spectroscopy with a piezoelectric tunable fibre-optic Fabry-Pérot filter. We show that the spectral correlation amplitude between the filter transmission window and gas absorption features is related to the gas absorption optical depth, and that different gases can be distinguished from one another using their correlation signal phase. Using an observed telluric-corrected, high-resolution near-infrared spectrum of Venus, we show via simulation that the Doppler shift of gases lines can be extracted from the phase of the lock-in signal using low-cost, compact, and lightweight fibre-optic components with lock-in amplification to improve the signal-to-noise ratio. This correlation spectroscopy technique has applications in the detection and radial velocity determination of faint spectral features in astronomy and remote sensing. We experimentally demonstrate remote CO2 detection system using a lock-in amplifier, fibre-optic Fabry-Pérot filter, and single channel photodiode.
△ Less
Submitted 9 July, 2021;
originally announced July 2021.
-
Design of Compact and Efficient Silicon Photonic Micro Antennas with Perfectly Vertical Emission
Authors:
Daniele Melati,
Mohsen Kamandar Dezfouli,
Yuri Grinberg,
Jens H. Schmid,
Ross Cheriton,
Siegfried Janz,
Pavel Cheben,
Dan-Xia Xu
Abstract:
Compact and efficient optical antennas are fundamental components for many applications, including high-density fiber-chip coupling and optical phased arrays. Here we present the design of grating-based micro-antennas with perfectly vertical emission in the 300-nm silicon-on-insulator platform. We leverage a methodology combining adjoint optimization and machine learning dimensionality reduction t…
▽ More
Compact and efficient optical antennas are fundamental components for many applications, including high-density fiber-chip coupling and optical phased arrays. Here we present the design of grating-based micro-antennas with perfectly vertical emission in the 300-nm silicon-on-insulator platform. We leverage a methodology combining adjoint optimization and machine learning dimensionality reduction to efficiently map the multiparameter design space of the antennas, analyse a large number of relevant performance metrics, carry out the required multi-objective optimization, and discover high performance designs. Using a one-step apodized grating we achieve a vertical upward diffraction efficiency of almost 92% with a 3.6 μm-long antenna. When coupled with an ultra-high numerical aperture fiber, the antenna exhibits a coupling efficiency of more than 81% (-0.9 dB) and a 1-dB bandwidth of almost 158 nm. The reflection generated by the perfectly vertical antenna is smaller than -20 dB on a 200-nm bandwidth centered at λ = 1550 nm.
△ Less
Submitted 7 August, 2020; v1 submitted 6 August, 2020;
originally announced August 2020.
-
Spectrum-free integrated photonic remote molecular identification and sensing
Authors:
Ross Cheriton,
Suresh Sivanandam,
Adam Densmore,
Ernst J. W. de Mooij,
Daniele Melati,
Mohsen Kamandar Dezfouli,
Pavel Cheben,
Danxia Xu,
Jens H. Schmid,
Jean Lapointe,
Rubin Ma,
Shurui Wang,
Luc Simard,
Siegfried Janz
Abstract:
Absorption spectroscopy is widely used in sensing and astronomy to understand molecular compositions on microscopic to cosmological scales. However, typical dispersive spectroscopic techniques require multichannel detection, fundamentally limiting the ability to detect extremely weak signals when compared to direct photometric methods. We report the realization of direct spectral molecular detecti…
▽ More
Absorption spectroscopy is widely used in sensing and astronomy to understand molecular compositions on microscopic to cosmological scales. However, typical dispersive spectroscopic techniques require multichannel detection, fundamentally limiting the ability to detect extremely weak signals when compared to direct photometric methods. We report the realization of direct spectral molecular detection using a silicon nanophotonic waveguide resonator, obviating dispersive spectral acquisition. We use a thermally tunable silicon ring resonator with a transmission spectrum matched and cross-correlated to the quasi-periodic vibronic absorption lines of hydrogen cyanide. We show that the correlation peak amplitude is proportional to the number of overlapping ring resonances and gas lines, and that molecular specificity is obtained from the phase of the correlation signal in a single detection channel. Our results demonstrate on-chip correlation spectroscopy that is less restricted by the signal-to-noise penalty of other spectroscopic approaches, enabling the detection of faint spectral signatures.
△ Less
Submitted 26 August, 2020; v1 submitted 18 May, 2020;
originally announced May 2020.
-
Formation of silicon nanocrystals in silicon carbide using flash lamp annealing
Authors:
C. Weiss,
M. Schnabel,
S. Prucnal,
J. Hofmann,
A. Reichert,
T. Fehrenbach,
W. Skorupa,
S. Janz
Abstract:
During the formation of Si nanocrystals (Si NC) in Si$_x$C$_{1-x}$ layers via solid-phase crystallization, the unintended formation of nanocrystalline SiC reduces the minority carrier lifetime and therefore the performance of Si$_x$C$_{1-x}$ as an absorber layer in solar cells. A significant reduction in the annealing time may suppress the crystallization of the SiC matrix while maintaining the fo…
▽ More
During the formation of Si nanocrystals (Si NC) in Si$_x$C$_{1-x}$ layers via solid-phase crystallization, the unintended formation of nanocrystalline SiC reduces the minority carrier lifetime and therefore the performance of Si$_x$C$_{1-x}$ as an absorber layer in solar cells. A significant reduction in the annealing time may suppress the crystallization of the SiC matrix while maintaining the formation of Si NC. In this study, we investigated the crystallization of stoichiometric SiC and Si-rich SiC using conventional rapid thermal annealing (RTA) and nonequilibrium millisecond range flash lamp annealing (FLA). The investigated Si$_x$C$_{1-x}$ films were prepared by plasma-enhanced chemical vapor deposition and annealed at temperatures from 700$°$C to 1100$°$C for RTA and at flash energies between 34 J/cm$^2$ and 62 J/cm$^2$ for FLA. GIXRD and FTIR were conducted to investigate hydrogen effusion, Si and SiC NC growth, and SiC crystallinity. Both the Si content and the choice of the annealing process affect the crystallization behavior. It is shown that under certain conditions, FLA can be successfully utilized for the formation of Si NC in a SiC matrix, which closely resembles Si NC in a SiC matrix achieved by RTA. The samples must have excess Si, and the flash energy should not exceed 40 J/cm$^2$ and 47 J/cm$^2$ for Si$_{0.63}$C$_{0.37}$ and Si$_{0.77}$C$_{0.23}$ samples, respectively. Under these conditions, FLA succeeds in producing Si NC of a given size in less crystalline SiC than RTA does. This result is discussed in terms of nucleation and crystal growth using classical crystallization theory. For FLA and RTA samples, an opposite relationship between NC size and Si content was observed and attributed either to the dependence of H effusion on Si content or to the optical absorption properties of the materials, which also depend on the Si content.
△ Less
Submitted 15 May, 2020;
originally announced May 2020.
-
Structural and optical properties of silicon nanocrystals embedded in silicon carbide
Authors:
C. Weiss,
M. Schnabel,
A. Reichert,
P. Löper,
S. Janz
Abstract:
The outstanding demonstration of quantum confinement in Si nanocrystals (Si NC) in a SiC matrix requires the fabrication of Si NC with a narrow size distribution. It is understood without controversy that this fabrication is a difficult exercise and that a multilayer (ML) structure is suitable for such fabrication only in a narrow parameter range. This parameter range is sought by varying both the…
▽ More
The outstanding demonstration of quantum confinement in Si nanocrystals (Si NC) in a SiC matrix requires the fabrication of Si NC with a narrow size distribution. It is understood without controversy that this fabrication is a difficult exercise and that a multilayer (ML) structure is suitable for such fabrication only in a narrow parameter range. This parameter range is sought by varying both the stoichiometric SiC barrier thickness and the Si-rich SiC well thickness between 3 and 9 nm and comparing them to single layers (SL). The samples processed for this investigation were deposited by plasma-enhanced chemical vapor deposition (PECVD) and subsequently subjected to thermal annealing at 1000-1100$°$C for crystal formation. Bulk information about the entire sample area and depth were obtained by structural and optical characterization methods: information about the mean Si NC size was determined from grazing incidence X-ray diffraction (GIXRD) measurements. Fourier-transform infrared spectroscopy (FTIR) was applied to gain insight into the structure of the Si-C network, and spectrophotometry measurements were performed to investigate the absorption coefficient and to estimate the bandgap $E_{04}$. All measurements showed that the influence of the ML structure on the Si NC size, on the Si-C network and on the absorption properties is subordinate to the influence of the overall Si content in the samples, which we identified as the key parameter for the structural and optical properties. We attribute this behavior to interdiffusion of the barrier and well layers. Because the produced Si NC are within the target size range of 2-4 nm for all layer thickness variations, we propose to use the Si content to adjust the Si NC size in future experiments.
△ Less
Submitted 15 May, 2020;
originally announced May 2020.
-
Electron and proton irradiation effect on the minority carrier lifetime in SiC passivated p-doped Ge wafers for space photovoltaics
Authors:
C. Weiss,
S. Park,
J. Lefèvre,
B. Boizot,
C. Mohr,
O. Cavani,
S. Picard,
R. Kurstjens,
T. Niewelt,
S. Janz
Abstract:
We report on the effect of electron and proton irradiation on effective minority carrier lifetimes ($τ_{eff}$) in p-type Ge wafers. Minority carrier lifetimes are assessed using the microwave-detected photoconductance decay ($μ$W-PCD) method. We examine the dependence of $τ_{eff}$ on the p-type doping level and on electron and proton radiation fluences at 1 MeV. The measured $τ_{eff}$ before and a…
▽ More
We report on the effect of electron and proton irradiation on effective minority carrier lifetimes ($τ_{eff}$) in p-type Ge wafers. Minority carrier lifetimes are assessed using the microwave-detected photoconductance decay ($μ$W-PCD) method. We examine the dependence of $τ_{eff}$ on the p-type doping level and on electron and proton radiation fluences at 1 MeV. The measured $τ_{eff}$ before and after irradiation are used to estimate the minority carriers diffusion lengths, which is an important parameter for solar cell operation. We observe $τ_{eff}$ ranging from 50 to 230 $μ$s for Ge doping levels between 1E17 and 1E16 at.cm$^{-3}$, corresponding to diffusion lengths of 500-1400 $μ$m. A separation of $τ_{eff}$ in Ge bulk lifetime and surface recombination velocity is conducted by irradiating Ge lifetime samples of different thicknesses. The possible radiation-induced defects are discussed on the basis of literature.
△ Less
Submitted 15 May, 2020;
originally announced May 2020.
-
Isolator-free Integration of C-band InAs-InP Quantum Dash Buried Heterostructure Lasers with Silicon Waveguides
Authors:
Jens H. Schmid,
Mohamed Rahim,
Grzegorz Pakulski,
Martin Vachon,
Siegfried Janz,
Pavel Cheben,
Dan-Xia Xu,
Philip J. Poole,
Pedro Barrios,
Weihong Jiang,
Jean Lapointe,
Daniele Melati
Abstract:
An InAs-on-InP quantum dash buried heterostructure laser and silicon chip optimized for mutual integration by direct facet-to-facet coupling have achieved -1.2 dB coupling efficiency, with coupled laser RIN of -150 dB/Hz and 152 kHz linewidth.
An InAs-on-InP quantum dash buried heterostructure laser and silicon chip optimized for mutual integration by direct facet-to-facet coupling have achieved -1.2 dB coupling efficiency, with coupled laser RIN of -150 dB/Hz and 152 kHz linewidth.
△ Less
Submitted 30 March, 2020;
originally announced May 2020.
-
Photonic Temperature and Wavelength Metrology by Spectral Pattern Recognition
Authors:
Siegfried Janz,
Ross Cheriton,
Dan-Xia Xu,
Aadam Densmore,
Sergey Dedyulin,
Andrew Todd,
Jens Schmid,
Pavel Cheben,
Martin Vachon,
Mohsen Kamandar Dezfouli,
Daniele Melati
Abstract:
Spectral pattern recognition is used to measure temperature and generate calibrated wavelength/frequency combs using a single silicon waveguide ring resonator. The ring generates two incommensurate interleaving TE and TM spectral combs that shift independently with temperature to create a spectral pattern that is unique at every temperature. Following an initial calibration, the ring temperature c…
▽ More
Spectral pattern recognition is used to measure temperature and generate calibrated wavelength/frequency combs using a single silicon waveguide ring resonator. The ring generates two incommensurate interleaving TE and TM spectral combs that shift independently with temperature to create a spectral pattern that is unique at every temperature. Following an initial calibration, the ring temperature can be determined by recognizing the spectral resonance pattern, and as a consequence the wavelength of every resonance is also known. Two methods of pattern based temperature retrieval are presented. In the first method, the ring is locked to a previously determined temperature set-point defined by the coincidence of only two specific TE and TM cavity modes. Based on a prior calibration at the set-point, the ring temperature and hence all resonance wavelengths are then known and the resulting comb can be used as a wavelength calibration reference. In this configuration, all reference comb wavelengths have been reproduced within a 5 pm accuracy across an 80 nm range by using an on-chip micro-heater to tune the ring. For more general photonic thermometry, a spectral correlation algorithm is developed to recognize a resonance pattern across a 30 nm wide spectral window and thereby determine ring temperature continuously to 50 mK accuracy. The correlation method is extended to simultaneously determine temperature and to identify and correct for wavelength calibration errors in the interrogating light source. The temperature and comb wavelength accuracy is limited primarily by the linewidth of the ring resonances, with accuracy and resolution scaling with the ring quality factor.
△ Less
Submitted 18 April, 2020;
originally announced April 2020.
-
Mapping the global design space of nanophotonic components using machine learning pattern recognition
Authors:
Daniele Melati,
Yuri Grinberg,
Mohsen Kamandar Dezfouli,
Siegfried Janz,
Pavel Cheben,
Jens H. Schmid,
Alejandro Sánchez-Postigo,
Dan-Xia Xu
Abstract:
Nanophotonics finds ever broadening applications requiring complex component designs with a large number of parameters to be simultaneously optimized. Recent methodologies employing optimization algorithms commonly focus on a single design objective, provide isolated designs, and do not describe how the design parameters influence the device behaviour. Here we propose and demonstrate a machine-lea…
▽ More
Nanophotonics finds ever broadening applications requiring complex component designs with a large number of parameters to be simultaneously optimized. Recent methodologies employing optimization algorithms commonly focus on a single design objective, provide isolated designs, and do not describe how the design parameters influence the device behaviour. Here we propose and demonstrate a machine-learning-based approach to map and characterize the multi-parameter design space of nanophotonic components. Pattern recognition is used to reveal the relationship between an initial sparse set of optimized designs through a significant reduction in the number of characterizing parameters. This defines a design sub-space of lower dimensionality that can be mapped faster by orders of magnitude than the original design space. As a result, multiple performance criteria are clearly visualized, revealing the interplay of the design parameters, highlighting performance and structural limitations, and inspiring new design ideas. This global perspective on high-dimensional design problems represents a major shift in how modern nanophotonic design is approached and provides a powerful tool to explore complexity in next-generation devices.
△ Less
Submitted 15 May, 2019; v1 submitted 19 October, 2018;
originally announced November 2018.
-
Ultra-low power nonlinear optics in a high Q CMOS compatible integrated micro-ring resonator
Authors:
M. Ferrera,
D. Duchesne,
L. Razzari,
M. Peccianti,
R. Morandotti,
P. Cheben,
S. Janz,
D. -X. Xu,
B. E. Little,
S. Chu,
D. J. Moss
Abstract:
We demonstrate efficient, low power, continuous-wave four-wave mixing in the C-band, using a high index doped silica glass micro ring resonator having a Q-factor of 1.2 million. A record high conversion efficiency for this kind of device is achieved over a bandwidth of 20nm. We show theoretically that the characteristic low dispersion enables phase-matching over a bandwidth > 160nm.
We demonstrate efficient, low power, continuous-wave four-wave mixing in the C-band, using a high index doped silica glass micro ring resonator having a Q-factor of 1.2 million. A record high conversion efficiency for this kind of device is achieved over a bandwidth of 20nm. We show theoretically that the characteristic low dispersion enables phase-matching over a bandwidth > 160nm.
△ Less
Submitted 12 November, 2017;
originally announced November 2017.
-
High speed optical processing via four-wave-mixing in a silicon waveguide
Authors:
F. Li,
M. Pelusi,
D-X. Xu,
A. Densmore,
R. Ma,
S. Janz,
D. J. Moss
Abstract:
We demonstrate all-optical demultiplexing at 160 Gigabits per second in the C-band, based on nonlinear optics using four-wave mixing (FWM) in a silicon nanowire. We achieve error-free operation with a penalty of ~ 3.9dB.
We demonstrate all-optical demultiplexing at 160 Gigabits per second in the C-band, based on nonlinear optics using four-wave mixing (FWM) in a silicon nanowire. We achieve error-free operation with a penalty of ~ 3.9dB.
△ Less
Submitted 1 May, 2017;
originally announced May 2017.
-
Silicon ring resonator based wavelength conversion via FWM at 10 Gb/s for differential phase-shift keyed signals
Authors:
F. Li,
M. Pelusi,
D-X. Xu,
R. Ma,
S. Janz,
B. J. Eggleton,
D. J. Moss
Abstract:
We demonstrate all-optical wavelength conversion at 10 Gb/s for differential phase-shift keyed (DPSK) data signals in the C-band, based on four-wave mixing (FWM) in a silicon ring resonator. Error-free operation with a system penalty of ~ 4.1 dB at 10-9 BER is achieved.
We demonstrate all-optical wavelength conversion at 10 Gb/s for differential phase-shift keyed (DPSK) data signals in the C-band, based on four-wave mixing (FWM) in a silicon ring resonator. Error-free operation with a system penalty of ~ 4.1 dB at 10-9 BER is achieved.
△ Less
Submitted 13 May, 2015;
originally announced May 2015.
-
Silicon nanowire based exclusive-OR gate using nonlinear optics for 40Gb/s DPSK signals
Authors:
F. Li,
T. D. Vo,
C. Husko,
M. Pelusi,
D-X. Xu,
A. Densmore,
R. Ma,
S. Janz,
B. J. Eggleton,
David J. Moss
Abstract:
We demonstrate an all-optical XOR logic function for 40Gb/s differential phase-shift keyed (DPSK) data signals in the C-band, based on four-wave mixing (FWM) in a silicon nanowire. Error-free operation with a system penalty of ~ 3.0dB and ~ 4.3dB at 10-9 BER is achieved.
We demonstrate an all-optical XOR logic function for 40Gb/s differential phase-shift keyed (DPSK) data signals in the C-band, based on four-wave mixing (FWM) in a silicon nanowire. Error-free operation with a system penalty of ~ 3.0dB and ~ 4.3dB at 10-9 BER is achieved.
△ Less
Submitted 12 May, 2015;
originally announced May 2015.
