A novel simulation approach for concentration-driven evaporation in capillaries
Authors:
Phil Namesnik,
Alexander Eifert,
Anja Lippert,
Louis Mett,
Uwe Janoske
Abstract:
Long liquid retention times in industrial gaps, due to capillary effects, significantly affect product lifetime by facilitating corrosion on solid surfaces. Concentration-driven evaporation plays a major role in mitigating this corrosion. Accurate evaporation rate predictions are crucial for improved product design. However, simulating capillary-driven flows with evaporation in complex geometries…
▽ More
Long liquid retention times in industrial gaps, due to capillary effects, significantly affect product lifetime by facilitating corrosion on solid surfaces. Concentration-driven evaporation plays a major role in mitigating this corrosion. Accurate evaporation rate predictions are crucial for improved product design. However, simulating capillary-driven flows with evaporation in complex geometries is challenging, requiring consideration of surface tension, wetting, and phase-change effects. Traditional approaches, such as the Volume-of-Fluid method, are prone to curvature calculation errors and have long simulation times due to strict time step limitations. This study introduces a novel semi-transient simulation approach for fast evaporation rate prediction in arbitrarily shaped cavities. The approach involves a unidirectional coupling circuit, simulating the fluid surface in Surface Evolver and combining it with a vapor-in-gas diffusion simulation in OpenFOAM. The approach assumes that the evaporation rate is calculated solely based on the conditions at a given liquid filling level, without considering the evaporation history. This allows for highly parallelized simulations, achieving simulation runtimes in the order of 10 min to cover up to 150 h of physical time. Numerical investigations are conducted for water evaporation in air at a temperature of 23°C and a relative humidity of 17%, for round and polygonal-shaped capillaries with inner diameters ranging from 1 mm to 13 mm. The results are validated using experimental data and show strong agreement. Simulations are also performed for complex industrial relevant gaps, demonstrating the applicability of the approach to a wide range of crevice geometries.
△ Less
Submitted 19 May, 2025; v1 submitted 16 January, 2025;
originally announced January 2025.
Investigation of flow patterns in two-phase carbon dioxide in horizontal and vertical pipes
Authors:
Alexander Siegfanz,
Wolfgang Wagner,
Uwe Janoske
Abstract:
Modern particle detectors crucially depend on efficient cooling systems. Two-phase carbon dioxide (CO$_2$) is a suitable solution as a cooling agent. This publication presents the observations and results of investigations of horizontal and vertical flow of two-phase CO$_2$ at a temperature of $T=-15\,^\circ$C and a pressure of approximately $23\,$bar. Heat fluxes between $98.5\,$kW/m$^2$ and…
▽ More
Modern particle detectors crucially depend on efficient cooling systems. Two-phase carbon dioxide (CO$_2$) is a suitable solution as a cooling agent. This publication presents the observations and results of investigations of horizontal and vertical flow of two-phase CO$_2$ at a temperature of $T=-15\,^\circ$C and a pressure of approximately $23\,$bar. Heat fluxes between $98.5\,$kW/m$^2$ and $200\,$kW/m$^2$ were applied to the CO$_2$, covering the range expected to occur in the future ATLAS Pixel detector being built for the high-luminosity phase of the Large Hadron Collider. Flow speeds ranged from $11.8\,$m/s to $28.1\,$m/s. Dedicated sensors were used to measure the temperature and pressure before and after heating the CO$_2$. Two-phase flow patterns occuring in the pipe after heating the CO$_2$ were recorded with a high-speed camera. Stratified, wavy and slug flow are found to be the predominant patterns for horizontal flow, while upward vertical flow is mainly found to be slug or churn. Based on the recorded images the void fraction of the CO$_2$ after heating is determined and compared for the different setups. The results are summarised in a flow-pattern map. A clear distinction between vertical and horizontal flow is found, with horizontal flow exhibiting a significantly higher void fraction than vertical flow. Based on the pressure measurements, the pressure drop after heating the CO$_2$ is measured and the corresponding Euler number is computed. While the pressure drop increases with the heat flux for horizontal flow due to frictional losses, the pressure drop reduces with the heat flux in case of upward vertical flow, since static pressure is important in this case.
△ Less
Submitted 17 December, 2023; v1 submitted 2 October, 2023;
originally announced October 2023.
