-
Improving the performance of optical inverse design of multilayer thin films using CNN-LSTM tandem neural networks
Authors:
Uijun Jung,
Deokho Jang,
Sungchul Kim,
Jungho Kim
Abstract:
Optical properties of thin film are greatly influenced by the thickness of each layer. Accurately predicting these thicknesses and their corresponding optical properties is important in the optical inverse design of thin films. However, traditional inverse design methods usually demand extensive numerical simulations and optimization procedures, which are time-consuming. In this paper, we utilize…
▽ More
Optical properties of thin film are greatly influenced by the thickness of each layer. Accurately predicting these thicknesses and their corresponding optical properties is important in the optical inverse design of thin films. However, traditional inverse design methods usually demand extensive numerical simulations and optimization procedures, which are time-consuming. In this paper, we utilize deep learning for the inverse design of the transmission spectra of SiO2/TiO2 multilayer thin films. We implement a tandem neural network (TNN), which can solve the one-to-many mapping problem that greatly degrades the performance of deep-learning-based inverse designs. In general, the TNN has been implemented by a back-to-back connection of an inverse neural network and a pre-trained forward neural network, both of which have been implemented based on multilayer perceptron (MLP) algorithms. In this paper, we propose to use not only MLP, but also convolutional neural network (CNN) or long short-term memory (LSTM) algorithms in the configuration of the TNN. We show that an LSTM-LSTM-based TNN yields the highest accuracy but takes the longest training time among nine configurations of TNNs. We also find that a CNN-LSTM-based TNN will be an optimal solution in terms of accuracy and speed because it could integrate the strengths of the CNN and LSTM algorithms.
△ Less
Submitted 11 June, 2025;
originally announced June 2025.
-
Upper Limit of Fusion Reactivity in Laser-Driven $p+{^{11}{\rm B}}$ Reaction
Authors:
Eunseok Hwang,
Myung-Ki Cheoun,
Dukjae Jang
Abstract:
We explore the averaged fusion reactivity of the $p+{^{11}{\rm B}}$ reaction in tabletop laser experiments using a plasma expansion model. We investigate the energy distribution of proton beams accelerated by lasers as a function of electron temperature $T_e$ and the dimensionless acceleration time $ω_{pi} t_{\rm acc}$, where $ω_{pi}$ is the ion plasma frequency. By combining these distributions w…
▽ More
We explore the averaged fusion reactivity of the $p+{^{11}{\rm B}}$ reaction in tabletop laser experiments using a plasma expansion model. We investigate the energy distribution of proton beams accelerated by lasers as a function of electron temperature $T_e$ and the dimensionless acceleration time $ω_{pi} t_{\rm acc}$, where $ω_{pi}$ is the ion plasma frequency. By combining these distributions with the fusion cross-section, we identify the optimal conditions that maximize the fusion reactivity, with $\left\langle σv \right\rangle = 8.12 \times 10^{-16}\,{\rm cm^3/s}$ at $k_B T_e = 10.0\,{\rm MeV}$ and $ω_{pi} t_{\rm acc} = 0.503$. These findings suggest that an upper limit exists for the fusion reactivity achievable in laser-driven $p+{^{11}{\rm B}}$ fusion experiments, even under optimized conditions.
△ Less
Submitted 12 April, 2025; v1 submitted 31 March, 2025;
originally announced April 2025.
-
Wireless Electronic-free Mechanical Metamaterial Implants
Authors:
Jianzhe Luo,
Wenyun Lu,
Pengcheng Jiao,
Daeik Jang,
Kaveh Barri,
Jiajun Wang,
Wenxuan Meng,
Rohit Prem Kumar,
Nitin Agarwal,
D. Kojo Hamilton,
Zhong Lin Wang,
Amir H. Alavi
Abstract:
Despite significant advancements in wireless smart implants over the last two decades, current implantable devices still operate passively and require additional electronic modules for wireless transmission of the stored biological data. To address these challenges, we propose an innovative wireless force sensing paradigm for implantable systems through the integration of mechanical metamaterials…
▽ More
Despite significant advancements in wireless smart implants over the last two decades, current implantable devices still operate passively and require additional electronic modules for wireless transmission of the stored biological data. To address these challenges, we propose an innovative wireless force sensing paradigm for implantable systems through the integration of mechanical metamaterials and nano energy harvesting technologies. We demonstrate composite mechanical metamaterial implants capable of serving as all-in-one wireless force sensing units, incorporating functions for power generation, sensing and transmission with ultra-low power requirements. In this alternative communication approach, the electrical signals harvested by the implants from mechanical stimuli are utilized directly for the wireless transmission of the sensed data. We conduct experimental and theoretical studies to demonstrate the wireless detection of the generated strain-induced polarization electric field using electrodes. The feasibility of the proposed wireless force sensing approach is evaluated through a proof-of-concept orthopedic implant in the form of a total knee replacement. The findings indicate that the created wireless, electronic-free metamaterial implants with a power output as low as 0.1 picowatts enable direct, self-powered wireless communication during force sensing across air, simulated body fluid and animal tissue. We validate the functionality of the proposed implants through a series of experiments conducted on an ex vivo human cadaver knee specimen. Furthermore, the effect of electrode size and placement on the strength of the received signals is examined. Finally, we highlight the potential of our approach to create a diverse array of mechanically-tunable wireless force sensing implants without relying on any external power sources.
△ Less
Submitted 1 December, 2024;
originally announced December 2024.
-
Simulating the Evolution of Lethal Non-Trackable Population and its Effect on LEO Sustainability
Authors:
Daniel Jang,
Richard Linares
Abstract:
The vast majority of the orbital population today is unobservable and untracked because of their small size. These lethal non-trackable objects will only become more numerous as more payloads and debris are launched into orbit and increase the collision rate. In this paper, the long-term effect of collisions is simulated with an efficient Monte-Carlo method to simulate the future LEO environment i…
▽ More
The vast majority of the orbital population today is unobservable and untracked because of their small size. These lethal non-trackable objects will only become more numerous as more payloads and debris are launched into orbit and increase the collision rate. In this paper, the long-term effect of collisions is simulated with an efficient Monte-Carlo method to simulate the future LEO environment including lethal non-trackable objects, which is typically ignored due to the large computational resources required. The results show that simulations that do not incorporate lethal non-trackable debris would be omitting a large number of debilitating collisions with active payloads and catastrophic collisions to a smaller effect. This shows the importance of simulating small debris in the long-term evolution of the orbital population, which is often omitted in the literature. This increased debris population and consequentially the risk to orbital payloads diminishes as smaller lethal non-trackable objects are considered. An efficient and validated model is used to simulate these numerous small objects. Several future cases such as launches of registered megaconstellations, improved post-mission disposal rates and no-future launches are explored to understand the effect of the inclusion or exclusion of lethal non-trackable objects.
△ Less
Submitted 27 August, 2024;
originally announced August 2024.
-
Fully printed flexible perovskite solar modules with improved energy alignment by tin oxide surface modification
Authors:
Lirong Dong,
Shudi Qiu,
Jose Garcia Cerrillo,
Michael Wagner,
Olga Kasian,
Sarmad Feroze,
Dongju Jang,
Chaohui Li,
Vincent M. Le Corre,
Kaicheng Zhang,
Heiko Peisert,
Felix U Kosasih,
Charline Arrive,
Tian Du,
Fu Yang,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Fully printed flexible perovskite solar cells (f-PSCs) show great potential for the commercialization of perovskite photovoltaics owing to their compatibility with high-throughput roll-to-roll (R2R) production. However, the challenge remains in the deficiency in controlling interfacial recombination losses of the functional layer, causing remarkable loss of power conversion efficiency (PCE) in ind…
▽ More
Fully printed flexible perovskite solar cells (f-PSCs) show great potential for the commercialization of perovskite photovoltaics owing to their compatibility with high-throughput roll-to-roll (R2R) production. However, the challenge remains in the deficiency in controlling interfacial recombination losses of the functional layer, causing remarkable loss of power conversion efficiency (PCE) in industrial production. Here, a fullerene-substituted alkylphosphonic acid dipole layer is introduced between the R2R-printed tin oxide electron transport layer and the perovskite active layer to reduce the energetic barrier and to suppress surface recombination at the buried interface. The resulting f-PSCs exhibit a PCE of 17.0% with negligible hysteresis, retain 95% of their initial PCE over 3000 bending cycles and achieve a T95 lifetime of 1200 h under 1 sun and 65 degreeC in nitrogen atmosphere. Moreover, the fully printed flexible perovskite solar mini-modules (f-PSMs) with a 20.25 cm2 aperture area achieve a PCE of 11.6%. The encapsulated f-PSMs retain 90% of their initial PCE after 500 h damp-heat testing at 65 degreeC and 85% relative humidity (ISOS-D3). This work marks an important progress toward the realization of efficient and stable flexible perovskite photovoltaics for commercialization.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
A New Monte-Carlo Model for the Space Environment
Authors:
Daniel Jang,
Davide Gusmini,
Peng Mun Siew,
Andrea D'Ambrosio,
Simone Servadio,
Pablo Machuca,
Richard Linares
Abstract:
This paper introduces a novel Monte Carlo (MC) method to simulate the evolution of the low-earth orbit environment, enhancing the MIT Orbital Capacity Analysis Tool (MOCAT). In recent decades, numerous space environment models have been developed by government agencies and research groups to understand and predict the dynamics of space debris. Our MC approach advances this by simulating the trajec…
▽ More
This paper introduces a novel Monte Carlo (MC) method to simulate the evolution of the low-earth orbit environment, enhancing the MIT Orbital Capacity Analysis Tool (MOCAT). In recent decades, numerous space environment models have been developed by government agencies and research groups to understand and predict the dynamics of space debris. Our MC approach advances this by simulating the trajectories of space objects and modeling their interactions, such as collisions and explosions. This aids in analyzing the trends of space-object and debris populations. A key innovation of our method is the computational efficiency in orbit propagation, which is crucial for handling potentially large numbers of objects over centuries. We present validation results against the IADC (Inter-Agency Space Debris Coordination Committee) study and explore various scenarios, including ones without future launches and those involving the launch of proposed megaconstellations with over 80,000 active payloads. With the improvement in computational efficiencies provided by this work, we can run these new scenarios that predict millions of trackable objects over a 200-year period. The previous state-of-the-art was 400,000 objects over the same period of time. Notably, while fewer megaconstellations are planned for altitudes above 800 km, even minimal failures in post-mission disposal or collision avoidance maneuvers can significantly impact orbital debris accumulation.
△ Less
Submitted 12 October, 2024; v1 submitted 16 May, 2024;
originally announced May 2024.
-
Towards a Machine Learning-Based Approach to Predict Space Object Density Distributions
Authors:
Victor Rodriguez-Fernandez,
Sumiyajav Sarangerel,
Peng Mun Siew,
Pablo Machuca,
Daniel Jang,
Richard Linares
Abstract:
With the rapid increase in the number of Anthropogenic Space Objects (ASOs), Low Earth Orbit (LEO) is facing significant congestion, thereby posing challenges to space operators and risking the viability of the space environment for varied uses. Current models for examining this evolution, while detailed, are computationally demanding. To address these issues, we propose a novel machine learning-b…
▽ More
With the rapid increase in the number of Anthropogenic Space Objects (ASOs), Low Earth Orbit (LEO) is facing significant congestion, thereby posing challenges to space operators and risking the viability of the space environment for varied uses. Current models for examining this evolution, while detailed, are computationally demanding. To address these issues, we propose a novel machine learning-based model, as an extension of the MIT Orbital Capacity Tool (MOCAT). This advanced model is designed to accelerate the propagation of ASO density distributions, and it is trained on hundreds of simulations generated by an established and accurate model of the space environment evolution. We study how different deep learning-based solutions can potentially be good candidates for ASO propagation and manage the high-dimensionality of the data. To assess the model's capabilities, we conduct experiments in long term forecasting scenarios (around 100 years), analyze how and why the performance degrades over time, and discuss potential solutions to make this solution better.
△ Less
Submitted 8 January, 2024;
originally announced January 2024.
-
Partitioned neural network approximation for partial differential equations enhanced with Lagrange multipliers and localized loss functions
Authors:
Deok-Kyu Jang,
Kyungsoo Kim,
Hyea Hyun Kim
Abstract:
Partitioned neural network functions are used to approximate the solution of partial differential equations. The problem domain is partitioned into non-overlapping subdomains and the partitioned neural network functions are defined on the given non-overlapping subdomains. Each neural network function then approximates the solution in each subdomain. To obtain the convergent neural network solution…
▽ More
Partitioned neural network functions are used to approximate the solution of partial differential equations. The problem domain is partitioned into non-overlapping subdomains and the partitioned neural network functions are defined on the given non-overlapping subdomains. Each neural network function then approximates the solution in each subdomain. To obtain the convergent neural network solution, certain continuity conditions on the partitioned neural network functions across the subdomain interface need to be included in the loss function, that is used to train the parameters in the neural network functions. In our work, by introducing suitable interface values, the loss function is reformulated into a sum of localized loss functions and each localized loss function is used to train the corresponding local neural network parameters. In addition, to accelerate the neural network solution convergence, the localized loss function is enriched with an augmented Lagrangian term, where the interface condition and the boundary condition are enforced as constraints on the local solutions by using Lagrange multipliers. The local neural network parameters and Lagrange multipliers are then found by optimizing the localized loss function. To take the advantage of the localized loss function for the parallel computation, an iterative algorithm is also proposed. For the proposed algorithms, their training performance and convergence are numerically studied for various test examples.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Enhanced physics-informed neural networks with domain scaling and residual correction methods for multi-frequency elliptic problems
Authors:
Deok-Kyu Jang,
Hyea Hyun Kim,
Kyungsoo Kim
Abstract:
In this paper, neural network approximation methods are developed for elliptic partial differential equations with multi-frequency solutions. Neural network work approximation methods have advantages over classical approaches in that they can be applied without much concerns on the form of the differential equations or the shape or dimension of the problem domain. When applied to problems with mul…
▽ More
In this paper, neural network approximation methods are developed for elliptic partial differential equations with multi-frequency solutions. Neural network work approximation methods have advantages over classical approaches in that they can be applied without much concerns on the form of the differential equations or the shape or dimension of the problem domain. When applied to problems with multi-frequency solutions, the performance and accuracy of neural network approximation methods are strongly affected by the contrast of the high- and low-frequency parts in the solutions. To address this issue, domain scaling and residual correction methods are proposed. The efficiency and accuracy of the proposed methods are demonstrated for multi-frequency model problems.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Pulsed-mode metalorganic vapor-phase epitaxy of GaN on graphene-coated c-sapphire for freestanding GaN thin films
Authors:
Seokje Lee,
Muhammad S. Abbas,
Dongha Yoo,
Keundong Lee,
Tobiloba G. Fabunmi,
Eunsu Lee,
Han Ik Kim,
Imhwan Kim,
Daniel Jang,
Sangmin Lee,
Jusang Lee,
Ki-Tae Park,
Changgu Lee,
Miyoung Kim,
Yun Seog Lee,
Celesta S. Chang,
Gyu-Chul Yi
Abstract:
We report the growth of high-quality GaN epitaxial thin films on graphene-coated c-sapphire substrates using pulsed-mode metalorganic vapor-phase epitaxy, together with the fabrication of freestanding GaN films by simple mechanical exfoliation for transferable light-emitting diodes (LEDs). High-quality GaN films grown on the graphene-coated sapphire substrates were easily lifted off using thermal…
▽ More
We report the growth of high-quality GaN epitaxial thin films on graphene-coated c-sapphire substrates using pulsed-mode metalorganic vapor-phase epitaxy, together with the fabrication of freestanding GaN films by simple mechanical exfoliation for transferable light-emitting diodes (LEDs). High-quality GaN films grown on the graphene-coated sapphire substrates were easily lifted off using thermal release tape and transferred onto foreign substrates. Furthermore, we revealed that the pulsed operation of ammonia flow during GaN growth was a critical factor for the fabrication of high-quality freestanding GaN films. These films, exhibiting excellent single crystallinity, were utilized to fabricate transferable GaN LEDs by heteroepitaxially growing InxGa1-xN/GaN multiple quantum wells and a p-GaN layer on the GaN films, showing their potential application in advanced optoelectronic devices.
△ Less
Submitted 5 December, 2023; v1 submitted 8 October, 2023;
originally announced October 2023.
-
A Dynamical Systems Analysis of the Effects of the Launch Rate Distribution on the Stability of a Source-Sink Orbital Debris Model
Authors:
Celina Pasiecznik,
Andrea D'Ambrosio,
Daniel Jang,
Richard Linares
Abstract:
Future launches are projected to significantly increase both the number of active satellites and aggregate collision risk in Low Earth Orbit (LEO). In this paper, a dynamical systems theory approach is used to analyze the effect of launch rate distribution on the stability of the LEO environment. A multi-shell, three-species source-sink model of the LEO environment, referred to as MOCAT-3 for MIT…
▽ More
Future launches are projected to significantly increase both the number of active satellites and aggregate collision risk in Low Earth Orbit (LEO). In this paper, a dynamical systems theory approach is used to analyze the effect of launch rate distribution on the stability of the LEO environment. A multi-shell, three-species source-sink model of the LEO environment, referred to as MOCAT-3 for MIT Orbital Capacity Assessment Tool 3 Species, is used to study the evolution of the species populations. The three species included in the model are active satellites, derelict satellites, and debris. The model's coefficients represent atmospheric drag, collision rate, mean satellite lifetime, post-mission disposal probability, and active debris removal rate. Solutions of the system of differential equations are computed, and an analysis of the stability of the equilibrium points is conducted for numerous launch rate distributions. The stability of the equilibrium points is used to test the sensitivity of the environment to run-away debris growth, known as Kessler syndrome, that occurs at the instability threshold. An analysis of the environment's response to perturbations in launch rate and debris population is conducted. The maximum perturbation in the debris population from the equilibrium state, for which the system remains in a stable configuration, is calculated. Plots of the phase space about the equilibrium points are generated. The results will help to better understand the orbital capacity of LEO and the stability of the space environment, as well as provide improved guidelines on future launch plans to avoid detrimental congestion of LEO.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Effects of electromagnetic fluctuations in plasmas on solar neutrino fluxes
Authors:
Eunseok Hwang,
Dukjae Jang,
Kiwan Park,
Motohiko Kusakabe,
Toshitaka Kajino,
A. Baha Balantekin,
Tomoyuki Maruyama,
Youngshin Kwon,
Kyujin Kwak,
Myung-Ki Cheoun
Abstract:
We explore the effects of electromagnetic (EM) fluctuations in plasmas on solar neutrino fluxes exploiting the fluctuation-dissipation theorem. We find that the EM spectrum in the solar core is enhanced by the EM fluctuations due to the high density of the Sun, which increases the radiation energy density and pressure. By the EM fluctuations involving the modified radiation formula, the central te…
▽ More
We explore the effects of electromagnetic (EM) fluctuations in plasmas on solar neutrino fluxes exploiting the fluctuation-dissipation theorem. We find that the EM spectrum in the solar core is enhanced by the EM fluctuations due to the high density of the Sun, which increases the radiation energy density and pressure. By the EM fluctuations involving the modified radiation formula, the central temperature decreases when the central pressure of the Sun is fixed. With a help of the empirical relation between central temperature and neutrino fluxes deduced from the numerical solar models, we present the change in each of the solar neutrino fluxes by the EM fluctuations. We also discuss the enhanced radiation pressure and energy density by the EM fluctuations for other astronomical objects.
△ Less
Submitted 2 November, 2022;
originally announced November 2022.
-
Phase-field simulation of liquid-vapor equilibrium and evaporation of fluid mixtures
Authors:
Olivier J. J. Ronsin,
DongJu Jang,
Hans-Joachim Egelhaaf,
Christoph J. Brabec,
Jens Harting
Abstract:
In solution-processing of thin films, the material layer is deposited from a solution composed of several solutes and solvents. The final morphology and hence the properties of the film often depend on the time needed for the evaporation of the solvents. This is typically the case for organic photoactive or electronic layers. Therefore, it is important to be able to predict the evaporation kinetic…
▽ More
In solution-processing of thin films, the material layer is deposited from a solution composed of several solutes and solvents. The final morphology and hence the properties of the film often depend on the time needed for the evaporation of the solvents. This is typically the case for organic photoactive or electronic layers. Therefore, it is important to be able to predict the evaporation kinetics of such mixtures. We propose here a new phase-field model for the simulation of evaporating fluid mixtures and simulate their evaporation kinetics. Similar to the Hertz-Knudsen theory, the local liquid-vapor equilibrium is assumed to be reached at the film surface and evaporation is driven by diffusion away from this gas layer. In the situation where the evaporation is purely driven by the liquid-vapor equilibrium, the simulations match the behavior expected theoretically from the free energy: for evaporation of pure solvents, the evaporation rate is constant and proportional to the vaporpressure. For mixtures, the evaporation rate is in general strongly time-dependent because of the changing composition of the film. Nevertheless, for highly non-ideal mixtures, such as poorly compatible fluids or polymer solutions, the evaporation rate becomes almost constant in the limit of low Biot numbers. The results of the simulation have been successfully compared to experiments on a polystyrene-toluene mixture. The model allows to take into account deformations of the liquid-vapor interface and therefore to simulate film roughness or dewetting.
△ Less
Submitted 9 November, 2021; v1 submitted 28 June, 2021;
originally announced June 2021.
-
Single-shot terahertz spectrometer using a microbolometer camera
Authors:
Dogeun Jang,
Hanran Jin,
Ki-Yong Kim
Abstract:
We demonstrate a single-shot terahertz spectrometer consisting of a modified Mach-Zehnder interferometer and a microbolometer focal plane array. The spectrometer is simple to use and can measure terahertz field autocorrelations and spectral power with no moving parts and no ultrashort-pulsed laser. It can effectively detect radiation at 10$\sim$40 THz when tested with a thermal source. It can be a…
▽ More
We demonstrate a single-shot terahertz spectrometer consisting of a modified Mach-Zehnder interferometer and a microbolometer focal plane array. The spectrometer is simple to use and can measure terahertz field autocorrelations and spectral power with no moving parts and no ultrashort-pulsed laser. It can effectively detect radiation at 10$\sim$40 THz when tested with a thermal source. It can be also used to measure the complex refractive index of a sample material. In principle, it can characterize both laser-based and non-laser-based terahertz sources and potentially cover 1$\sim$10 THz with specially-designed terahertz microbolometers.
△ Less
Submitted 4 June, 2020;
originally announced June 2020.
-
Multicycle terahertz pulse generation by optical rectification in LiNbO$_3$, LiTaO$_3$, and BBO crystals
Authors:
Dogeun Jang,
Ki-Yong Kim
Abstract:
We report multicycle, narrowband, terahertz radiation at 14.8 THz produced by phase-matched optical rectification of femtosecond laser pulses in bulk lithium niobate (LiNbO$_3$) crystals. Our experiment and simulation show that the output terahertz energy greatly enhances when the input laser pulse is highly chirped, contrary to a common optical rectification process. We find this abnormal behavio…
▽ More
We report multicycle, narrowband, terahertz radiation at 14.8 THz produced by phase-matched optical rectification of femtosecond laser pulses in bulk lithium niobate (LiNbO$_3$) crystals. Our experiment and simulation show that the output terahertz energy greatly enhances when the input laser pulse is highly chirped, contrary to a common optical rectification process. We find this abnormal behavior is attributed to a linear electro-optic (or Pockels) effect, in which the laser pulse propagating in LiNbO$_3$ is modulated by the terahertz field it produces, and this in turn drives optical rectification more effectively to produce the terahertz field. This resonant cascading effect can greatly increase terahertz conversion efficiencies when the input laser pulse is properly pre-chirped with additional third order dispersion. We also observe similar multicycle terahertz emission from lithium tantalate (LiTaO$_3$) at 14 THz and barium borate (BBO) at 7 THz, 10.6 THz, and 14.6 THz, all produced by narrowband phase-matched optical rectification.
△ Less
Submitted 23 May, 2020;
originally announced May 2020.
-
Generation of 0.7 mJ multicycle 15 THz radiation by phase-matched optical rectification in lithium niobate
Authors:
Dogeun Jang,
Jae Hee Sung,
Seong Ku Lee,
Chul Kang,
Ki-Yong Kim
Abstract:
We demonstrate efficient multicycle terahertz pulse generation at 14.6 THz from large-area lithium niobate crystals by using high-energy (up to 2 J) femtosecond Ti:sapphire laser pulses. Such terahertz radiation is produced by phase-matched optical rectification in lithium niobate. Experimentally, we achieve maximal terahertz energy of 0.71 mJ with conversion efficiency of $\sim$0.04%. We also fin…
▽ More
We demonstrate efficient multicycle terahertz pulse generation at 14.6 THz from large-area lithium niobate crystals by using high-energy (up to 2 J) femtosecond Ti:sapphire laser pulses. Such terahertz radiation is produced by phase-matched optical rectification in lithium niobate. Experimentally, we achieve maximal terahertz energy of 0.71 mJ with conversion efficiency of $\sim$0.04%. We also find that the effective interaction length for optimal terahertz conversion is fundamentally limited by terahertz absorption, laser pulse stretching by material dispersion, and terahertz-induced nonlinear cascading effects on the driving laser pulse.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
-
Three-dimensional particle tracking velocimetry using shallow neural network for real-time analysis
Authors:
Yeonghyeon Gim,
Dong Kyu Jang,
Dong Kee Sohn,
Hyoungsoo Kim,
Han Seo Ko
Abstract:
Three-dimensional particle tracking velocimetry (3D-PTV) technique is widely used to acquire the complicated trajectories of particles and flow fields. It is known that the accuracy of 3D-PTV depends on the mapping function to reconstruct three-dimensional particles locations. The mapping function becomes more complicated if the number of cameras is increased and there is a liquid-vapor interface,…
▽ More
Three-dimensional particle tracking velocimetry (3D-PTV) technique is widely used to acquire the complicated trajectories of particles and flow fields. It is known that the accuracy of 3D-PTV depends on the mapping function to reconstruct three-dimensional particles locations. The mapping function becomes more complicated if the number of cameras is increased and there is a liquid-vapor interface, which crucially affect the total computation time. In this paper, using a shallow neural network model (SNN), we dramatically decrease the computation time with a high accuracy to successfully reconstruct the three-dimensional particle positions, which can be used for real-time particle detection for 3D-PTV. The developed technique is verified by numerical simulations and applied to measure a complex solutal Marangoni flow patterns inside a binary mixture droplet.
△ Less
Submitted 2 February, 2020;
originally announced February 2020.
-
A phase-field model for the evaporation of thin film mixtures
Authors:
Olivier J. J. Ronsin,
DongJu Jang,
Hans-Joachim Egelhaaf,
Christoph J. Brabec,
Jens Harting
Abstract:
The performance of solution-processed solar cells strongly depends on the geometrical structure and roughness of the photovoltaic layers formed during film drying. During the drying process, the interplay of crystallization and liquid-liquid demixing leads to the structure formation on the nano- and microscale and to the final rough film. In order to better understand how the film structure can be…
▽ More
The performance of solution-processed solar cells strongly depends on the geometrical structure and roughness of the photovoltaic layers formed during film drying. During the drying process, the interplay of crystallization and liquid-liquid demixing leads to the structure formation on the nano- and microscale and to the final rough film. In order to better understand how the film structure can be improved by process engineering, we aim at theoretically investigating these systems by means of phase-field simulations. We introduce an evaporation model based on the Cahn-Hilliard equation for the evolution of the fluid concentrations coupled to the Allen-Cahn equation for the liquid-vapour phase transformation. We demonstrate its ability to match the experimentally measured drying kinetics and study the impact of the parameters of our model. Furthermore, the evaporation of solvent blends and solvent-vapour annealing are investigated. The dry film roughness emerges naturally from our set of equations, as illustrated through preliminary simulations of spinodal decomposition and film drying on structured substrates.
△ Less
Submitted 3 March, 2020; v1 submitted 15 January, 2020;
originally announced January 2020.
-
Simplified single-shot supercontinuum spectral interferometry
Authors:
Dhruvit Patel,
Dogeun Jang,
Scott W. Hancock,
Howard M. Milchberg,
Ki-Yong Kim
Abstract:
We have experimentally demonstrated a simplified method for performing single-shot supercontinuum spectral interferometry (SSSI) that does not require pre-characterization of the probe pulse. The method, originally proposed by D. T. Vu, D. Jang, and K. Y. Kim, uses a genetic algorithm (GA) and as few as two time-delayed pump-probe shots to retrieve the pump-induced phase shift on the probe [Opt. E…
▽ More
We have experimentally demonstrated a simplified method for performing single-shot supercontinuum spectral interferometry (SSSI) that does not require pre-characterization of the probe pulse. The method, originally proposed by D. T. Vu, D. Jang, and K. Y. Kim, uses a genetic algorithm (GA) and as few as two time-delayed pump-probe shots to retrieve the pump-induced phase shift on the probe [Opt. Express 26, 20572 (2018)]. We show that the GA is able to successfully retrieve the transient modulations on the probe, and that the error in the retrieved modulation decreases dramatically with the number of shots used. In addition, we propose and demonstrate a practical method that allows SSSI to be done with a single pump-probe shot (again, without the need for pre-characterization of the probe). This simplified method can prove to be immensely useful when performing SSSI with a low-repetition-rate laser source.
△ Less
Submitted 20 December, 2019;
originally announced December 2019.
-
Scalable terahertz generation by large-area optical rectification at 80 TW laser power
Authors:
Dogeun Jang,
Chul Kang,
Seong Ku Lee,
Jae Hee Sung,
Chul-sik Kee,
Ki-yong Kim
Abstract:
We demonstrate high-energy terahertz generation from a large-aperture (75 mm diameter) lithium niobate wafer by using a femtosecond laser with energy up to 2 J. This scheme utilizes optical rectification in a bulk lithium niobate crystal, where most terahertz energy is emitted from a thin layer of the rear surface. Despite its simple setup, this scheme can yield 0.19 mJ of terahertz energy with la…
▽ More
We demonstrate high-energy terahertz generation from a large-aperture (75 mm diameter) lithium niobate wafer by using a femtosecond laser with energy up to 2 J. This scheme utilizes optical rectification in a bulk lithium niobate crystal, where most terahertz energy is emitted from a thin layer of the rear surface. Despite its simple setup, this scheme can yield 0.19 mJ of terahertz energy with laser-to-terahertz conversion efficiencies of ~0.01%, about 3 times better than ZnTe when pumped at 800 nm. The experimental setup is up-scalable for multi-mJ terahertz generation with petawatt laser pumping.
△ Less
Submitted 17 July, 2019;
originally announced July 2019.
-
Spectral Characterization of a Microbolometer Focal Plane Array at Terahertz Frequencies
Authors:
D. Jang,
M. Kimbrue,
Y. J. Yoo,
K. Y. Kim
Abstract:
We have developed a method to characterize the spectral response of an uncooled microbolometer focal plane array at a broad range of terahertz (THz) frequencies (4~50 THz). This is achieved by using a spectrum-tailored blackbody radiator as a broadband THz source and measuring its spectral power with a Fourier transform infrared (FTIR) interferometer. With an additional measurement with a pyroelec…
▽ More
We have developed a method to characterize the spectral response of an uncooled microbolometer focal plane array at a broad range of terahertz (THz) frequencies (4~50 THz). This is achieved by using a spectrum-tailored blackbody radiator as a broadband THz source and measuring its spectral power with a Fourier transform infrared (FTIR) interferometer. With an additional measurement with a pyroelectric detector as a reference, the spectral response of the microbolometer relative to the pyroelectric reference is obtained with a signal-to-noise ratio of 100 over a >50 THz bandwidth.
△ Less
Submitted 3 August, 2018; v1 submitted 26 June, 2018;
originally announced June 2018.
-
Simplified Chirp Characterization in Single-shot Supercontinuum Spectral Interferometry
Authors:
DinhDuy Tran Vu,
Dogeun Jang,
Ki-Yong Kim
Abstract:
Single-shot supercontinuum spectral interferometry (SSSI) is an optical technique that can measure ultrafast transients in the complex index of refraction. This method uses chirped supercontinuum reference/probe pulses that need to be pre-characterized prior to use. Conventionally, the spectral phase (or chirp) of those pulses can be determined from a series of phase or spectral measurements taken…
▽ More
Single-shot supercontinuum spectral interferometry (SSSI) is an optical technique that can measure ultrafast transients in the complex index of refraction. This method uses chirped supercontinuum reference/probe pulses that need to be pre-characterized prior to use. Conventionally, the spectral phase (or chirp) of those pulses can be determined from a series of phase or spectral measurements taken at various time delays with respect to a pump-induced modulation. Here we propose a novel method to simplify this process and characterize reference/probe pulses up to the third order dispersion from a minimum of 2 snapshots taken at different pump-probe delays. Alternatively, without any pre-characterization, our method can retrieve both unperturbed and perturbed reference/probe phases, including the pump-induced modulation, from 2 time-delayed snapshots. From numerical simulations, we show that our retrieval algorithm is robust and can achieve high accuracy even with 2 snapshots. Without any apparatus modification, our method can be easily applied to any experiment that uses SSSI.
△ Less
Submitted 4 June, 2018;
originally announced June 2018.
-
Measurement of the $B_c^{\pm}$ production cross section in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV
Authors:
CDF Collaboration,
T. Aaltonen,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
T. Bae,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce,
F. Bedeschi
, et al. (374 additional authors not shown)
Abstract:
We describe a measurement of the ratio of the cross sections times branching fractions of the $B_c^+$ meson in the decay mode $B_c^+ \rightarrow J/ψμν$ to the $B^+$ meson in the decay mode $B^+ \rightarrow J/ψK^+$ in proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV. The measurement is based on the complete CDF Run II data set, which comes from an integrated luminosity of…
▽ More
We describe a measurement of the ratio of the cross sections times branching fractions of the $B_c^+$ meson in the decay mode $B_c^+ \rightarrow J/ψμν$ to the $B^+$ meson in the decay mode $B^+ \rightarrow J/ψK^+$ in proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV. The measurement is based on the complete CDF Run II data set, which comes from an integrated luminosity of $8.7\,{\rm fb}^{-1}$. The ratio of the production cross sections times branching fractions for $B_c^+$ and $B_c^+$ mesons with momentum transverse to the beam greater than $6~\textrm{GeV}/c$ and rapidity magnitude smaller than 0.6 is $0.211\pm 0.012~\mbox{(stat)}^{+0.021}_{-0.020}~\mbox{(syst)}$. Using the known $B^+ \rightarrow J/ψK^+$ branching fraction, the known $B^+$ production cross section, and a selection of the predicted $B_c^+ \rightarrow J/ψμν$ branching fractions, the range for the total $B_c^+$ production cross section is estimated.
△ Less
Submitted 26 March, 2016; v1 submitted 15 January, 2016;
originally announced January 2016.
