-
A multi-purpose reciprocating probe drive system for studying the effect of gas-puffs on edge plasma dynamics in the ADITYA-U tokamak
Authors:
Kaushlender Singh,
Bharat Hegde,
Ashok K. Kumawat,
Ankit Kumar,
M. S. Khan,
Suman Dolui,
Injamul Hoque,
Tanmay Macwan,
Sharvil Patel,
Abha Kanik,
Komal Yadav,
Soumitra Banerjee,
Harshita Raj,
Devilal Kumawat,
Pramila Gautam,
Rohit Kumar,
Suman Aich,
Laxmikanta Pradhan,
Ankit Patel,
Kalpesh Galodiya,
Abhijeet Kumar,
Shwetang Pandya,
K. M. Patel,
K. A. Jadeja,
D. C. Raval
, et al. (2 additional authors not shown)
Abstract:
This article reports the development of a versatile high-speed reciprocating drive system (HRDS) with interchangeable probe heads to characterize the edge plasma region of ADITYA-U tokamak. This reciprocating probe drive system consisting of Langmuir and magnetic probe heads, is designed, fabricated, installed, and operated for studying the extent of fuel/impurity gas propagation and its influence…
▽ More
This article reports the development of a versatile high-speed reciprocating drive system (HRDS) with interchangeable probe heads to characterize the edge plasma region of ADITYA-U tokamak. This reciprocating probe drive system consisting of Langmuir and magnetic probe heads, is designed, fabricated, installed, and operated for studying the extent of fuel/impurity gas propagation and its influence on plasma dynamics in the far-edge region inside the last closed magnetic flux surface (LCFS). The HRDS is driven by a highly accurate, easy-to-control, dynamic, brushless, permanently excited synchronous servo motor operated by a PXI-commanded controller. The system is remotely operated and allows for precise control of the speed, acceleration, and distance traveled of the probe head on a shot-to-shot basis, facilitating seamless control of operations according to experimental requirements. Using this system, consisting of a linear array of Langmuir probes, measurements of plasma density, temperature, potential, and their fluctuations revealed that the fuel gas-puff impact these mean and fluctuating parameters up to three to four cm inside the LCFS. Attaching an array of magnetic probes to this system led to measurements of magnetic fluctuations inside the LCFS. The HRDS system is fully operational and serves as an important diagnostic tool for ADITYA-U tokamak.
△ Less
Submitted 8 January, 2025;
originally announced January 2025.
-
Stabilization of sawteeth instability by short gas pulse injection in ADITYA-U tokamak
Authors:
Suman Dolui,
Kaushlender Singh,
Bharat Hegde,
T. Macwan,
SK Injamul Hoque,
Umesh Nagora,
Jaya Kumar A.,
S. Purohit,
A. N. Adhiya,
K. A. Jadeja,
Harshita Raj,
Ankit Kumar,
Ashok K. Kumawat,
Suman Aich,
Rohit Kumar,
K. M. Patel,
P. Gautam,
Sharvil Patel,
N. Yadava,
N. Ramaiya,
M. K. Gupta,
S. K. Pathak,
M. B. Chowdhuri,
S. Sharma,
A. Kuley
, et al. (6 additional authors not shown)
Abstract:
Experiments on ADITYA-U tokamak show a marked enhancement in the sawtooth period by application of short gas puffs of fuel that cause a modification of the radial density profile. A consequent suppression of the trapped electron modes (TEMs) then leads to an increase in the core electron temperature. This slows down the heat propagation following a sawtooth crash, causing a delay in achieving the…
▽ More
Experiments on ADITYA-U tokamak show a marked enhancement in the sawtooth period by application of short gas puffs of fuel that cause a modification of the radial density profile. A consequent suppression of the trapped electron modes (TEMs) then leads to an increase in the core electron temperature. This slows down the heat propagation following a sawtooth crash, causing a delay in achieving the critical temperature gradient inside the q = 1 surface required for the next sawtooth crash to happen. The overall scenario has strong similarities with the behavior of sawtooth under electron cyclotron resonance heating (ECRH). Our findings suggest an alternate, simpler technique for sawtooth control that may be usefully employed in small/medium-sized tokamaks that do not have an ECRH or any other auxiliary heating facility.
△ Less
Submitted 3 January, 2025;
originally announced January 2025.
-
MHD activity induced coherent mode excitation in the edge plasma region of ADITYA-U Tokamak
Authors:
Kaushlender Singh,
Suman Dolui,
Bharat Hegde,
Lavkesh Lachhvani,
Sharvil Patel,
Injamul Hoque,
Ashok K. Kumawat,
Ankit Kumar,
Tanmay Macwan,
Harshita Raj,
Soumitra Banerjee,
Komal Yadav,
Abha Kanik,
Pramila Gautam,
Rohit Kumar,
Suman Aich,
Laxmikanta Pradhan,
Ankit Patel,
Kalpesh Galodiya,
Daniel Raju,
S. K. Jha,
K. A. Jadeja,
K. M. Patel,
S. N. Pandya,
M. B. Chaudhary
, et al. (6 additional authors not shown)
Abstract:
In this paper, we report the excitation of coherent density and potential fluctuations induced by magnetohydrodynamic (MHD) activity in the edge plasma region of ADITYA-U Tokamak. When the amplitude of the MHD mode, mainly the m/n = 2/1, increases beyond a threshold value of 0.3-0.4 %, coherent oscillations in the density and potential fluctuations are observed having the same frequency as that of…
▽ More
In this paper, we report the excitation of coherent density and potential fluctuations induced by magnetohydrodynamic (MHD) activity in the edge plasma region of ADITYA-U Tokamak. When the amplitude of the MHD mode, mainly the m/n = 2/1, increases beyond a threshold value of 0.3-0.4 %, coherent oscillations in the density and potential fluctuations are observed having the same frequency as that of the MHD mode. The mode numbers of these MHD induced density and potential fluctuations are obtained by Langmuir probes placed at different radial, poloidal, and toroidal locations in the edge plasma region. Detailed analyses of these Langmuir probe measurements reveal that the coherent mode in edge potential fluctuation has a mode structure of m/n = 2/1 whereas the edge density fluctuation has an m/n = 1/1 structure. It is further observed that beyond the threshold, the coupled power fraction scales almost linearly with the magnitude of magnetic fluctuations. Furthermore, the rise rates of the coupled power fraction for coherent modes in density and potential fluctuations are also found to be dependent on the growth rate of magnetic fluctuations. The disparate mode structures of the excited modes in density and plasma potential fluctuations suggest that the underlying mechanism for their existence is most likely due to the excitation of the global high-frequency branch of zonal flows occurring through the coupling of even harmonics of potential to the odd harmonics of pressure due to 1/R dependence of the toroidal magnetic field.
△ Less
Submitted 23 July, 2024;
originally announced July 2024.
-
Feedback Cooling of an Insulating High-Q Diamagnetically Levitated Plate
Authors:
S. Tian,
K. Jadeja,
D. Kim,
A. Hodges,
G. C. Hermosa,
C. Cusicanqui,
R. Lecamwasam,
J. E. Downes,
J. Twamley
Abstract:
Levitated systems in vacuum have many potential applications ranging from new types of inertial and magnetic sensors through to fundamental issues in quantum science, the generation of massive Schrodinger cats, and the connections between gravity and quantum physics. In this work, we demonstrate the passive, diamagnetic levitation of a centimeter-sized massive oscillator which is fabricated using…
▽ More
Levitated systems in vacuum have many potential applications ranging from new types of inertial and magnetic sensors through to fundamental issues in quantum science, the generation of massive Schrodinger cats, and the connections between gravity and quantum physics. In this work, we demonstrate the passive, diamagnetic levitation of a centimeter-sized massive oscillator which is fabricated using a novel method that ensures that the material, though highly diamagnetic, is an electrical insulator. By chemically coating a powder of microscopic graphite beads with silica and embedding the coated powder in high-vacuum compatible wax, we form a centimeter-sized thin square plate which magnetically levitates over a checkerboard magnet array. The insulating coating reduces eddy damping by almost an order of magnitude compared to uncoated graphite with the same particle size. These plates exhibit a different equilibrium orientation to pyrolytic graphite due to their isotropic magnetic susceptibility. We measure the motional quality factor to be Q~1.58*10^5 for an approximately centimeter-sized composite resonator with a mean particle size of 12 microns. Further, we apply delayed feedback to cool the vertical motion of frequency ~19 Hz from room temperature to 320 millikelvin.
△ Less
Submitted 4 December, 2023;
originally announced December 2023.
-
A Cold Atom Radio-Frequency Magnetometer
Authors:
Yuval Cohen,
Krishna Jadeja,
Sindi Sula,
Michela Venturelli,
Cameron Deans,
Luca Marmugi,
Ferruccio Renzoni
Abstract:
We propose and demonstrate a radio-frequency atomic magnetometer with sub-Doppler laser cooled rubidium-87. With a simple and compact design, our system demonstrates a sensitivity of $330~pT/\sqrt{Hz}$ in an unshielded environment, thus matching or surpassing previously reported cold atoms designs. By merging the multiple uses and robustness of radio-frequency atomic magnetometers with the detaile…
▽ More
We propose and demonstrate a radio-frequency atomic magnetometer with sub-Doppler laser cooled rubidium-87. With a simple and compact design, our system demonstrates a sensitivity of $330~pT/\sqrt{Hz}$ in an unshielded environment, thus matching or surpassing previously reported cold atoms designs. By merging the multiple uses and robustness of radio-frequency atomic magnetometers with the detailed control of laser cooling, our cold atom radio-frequency magnetometer has the potential to move applications of atomic magnetometry to high spatial resolution. Direct impact in metrology for applied sciences, materials characterization, and nanotechnology can be anticipated.
△ Less
Submitted 21 February, 2019;
originally announced February 2019.
-
A time-delay model for molecular gas flow into vacuum
Authors:
Rajiv Goswami,
K. A. Jadeja
Abstract:
Flow of molecular gas into a complex vacuum system is investigated by a lumped parameter model to estimate the time evolution of gas pressure $p_g$, which for the first time takes into account the realistic effect of time-delay arising due to multiple reasons such as valve response, pumping and transport of gas, conductance of the pipe network, etc. The net effect of all such delays taken together…
▽ More
Flow of molecular gas into a complex vacuum system is investigated by a lumped parameter model to estimate the time evolution of gas pressure $p_g$, which for the first time takes into account the realistic effect of time-delay arising due to multiple reasons such as valve response, pumping and transport of gas, conductance of the pipe network, etc. The net effect of all such delays taken together into a single (constant) delay term gives rise to a scalar delay differential equation (DDE). Analytical solutions of a linear DDE in presence of external forcing due to the (pulsed) injection of gas and outgassing from a stainless steel (SS) wall are then derived using the Laplace transform method, where the transcendental characteristic equation is approximated by means of rational transfer functions such as diagonal Pad{é} approximation. A good agreement is obtained with the numerical results and it is shown from these solutions that a reasonably good match with experimental results is obtained only in the presence of a nonzero time-delay. An attempt is also made to simplify the DDE into an ordinary differential equation (ODE) by using a low-order Taylor series expansion of the time-delay term. A singular perturbation method is used to solve the resultant initial value problem (IVP) type second-order ODE. It is found that unlike the Laplace transform method, the ODE closely approximates the DDE only if the delay is small. Emergence of stable periodic oscillations in $p_g$, as a generic supercritical Hopf bifurcation, if time-delay exceeds a critical value is then established by numerical and Poincar{é}-Lindstedt method.
△ Less
Submitted 21 May, 2018;
originally announced June 2018.
