Showing 1–15 of 15 results for author: Ishii, M

Commissioning of a compact multibend achromat lattice: A new 3 GeV synchrotron radiation facility

Authors: Shuhei Obara, Kota Ueshima, Takao Asaka, Yuji Hosaka, Koichi Kan, Nobuyuki Nishimori, Toshitaka Aoki, Hiroyuki Asano, Koichi Haga, Yuto Iba, Akira Ihara, Katsumasa Ito, Taiki Iwashita, Masaya Kadowaki, Rento Kanahama, Hajime Kobayashi, Hideki Kobayashi, Hideo Nishihara, Masaaki Nishikawa, Haruhiko Oikawa, Ryota Saida, Keisuke Sakuraba, Kento Sugimoto, Masahiro Suzuki, Kouki Takahashi , et al. (57 additional authors not shown)

Abstract: NanoTerasu, a new 3 GeV synchrotron light source in Japan, began user operation in April 2024. It provides high-brilliance soft to tender X-rays and covers a wide spectral range from ultraviolet to tender X-rays. Its compact storage ring with a circumference of 349 m is based on a four-bend achromat lattice to provide two straight sections in each cell for insertion devices with a natural horizont… ▽ More NanoTerasu, a new 3 GeV synchrotron light source in Japan, began user operation in April 2024. It provides high-brilliance soft to tender X-rays and covers a wide spectral range from ultraviolet to tender X-rays. Its compact storage ring with a circumference of 349 m is based on a four-bend achromat lattice to provide two straight sections in each cell for insertion devices with a natural horizontal emittance of 1.14 nm rad, which is small enough for soft X-rays users. The NanoTerasu accelerator incorporates several innovative technologies, including a full-energy injector C-band linear accelerator with a length of 110 m, an in-vacuum off-axis injection system, a four-bend achromat with B-Q combined bending magnets, and a TM020 mode accelerating cavity with built-in higher-order-mode dampers in the storage ring. This paper presents the accelerator machine commissioning over a half-year period and our model-consistent ring optics correction. The first user operation with a stored beam current of 160 mA is also reported. We summarize the storage ring parameters obtained from the commissioning. This is helpful for estimating the effective optical properties of synchrotron radiation at NanoTerasu. △ Less

Submitted 11 July, 2024; originally announced July 2024.

Comments: 30 pages, 24 figures, submitted to the journal

Synergetic quantum error mitigation by randomized compiling and zero-noise extrapolation for the variational quantum eigensolver

Authors: Tomochika Kurita, Hammam Qassim, Masatoshi Ishii, Hirotaka Oshima, Shintaro Sato, Joseph Emerson

Abstract: We propose a quantum error mitigation strategy for the variational quantum eigensolver (VQE) algorithm. We find, via numerical simulation, that very small amounts of coherent noise in VQE can cause substantially large errors that are difficult to suppress by conventional mitigation methods, and yet our proposed mitigation strategy is able to significantly reduce these errors. The proposed strategy… ▽ More We propose a quantum error mitigation strategy for the variational quantum eigensolver (VQE) algorithm. We find, via numerical simulation, that very small amounts of coherent noise in VQE can cause substantially large errors that are difficult to suppress by conventional mitigation methods, and yet our proposed mitigation strategy is able to significantly reduce these errors. The proposed strategy is a combination of previously reported techniques, namely randomized compiling (RC) and zero-noise extrapolation (ZNE). Intuitively, randomized compiling turns coherent errors in the circuit into stochastic Pauli errors, which facilitates extrapolation to the zero-noise limit when evaluating the cost function. Our numerical simulation of VQE for small molecules shows that the proposed strategy can mitigate energy errors induced by various types of coherent noise by up to two orders of magnitude. △ Less

Submitted 13 November, 2023; v1 submitted 21 December, 2022; originally announced December 2022.

Comments: 26 pages, 21 figures

Journal ref: Quantum 7, 1184 (2023)

Breakup dynamics in primary jet atomization using mesh- and interface- refined Cahn-Hilliard Navier-Stokes

Authors: Makrand A. Khanwale, Kumar Saurabh, Masado Ishii, Hari Sundar, Baskar Ganapathysubramanian

Abstract: We present a technique to perform interface-resolved simulations of complex breakup dynamics in two-phase flows using the Cahn-Hilliard Navier-Stokes equations. The method dynamically decreases the interface thickness parameter in relevant regions and simultaneously increases local mesh resolution, preventing numerical artifacts. We perform a detailed numerical simulation of pulsed jet atomization… ▽ More We present a technique to perform interface-resolved simulations of complex breakup dynamics in two-phase flows using the Cahn-Hilliard Navier-Stokes equations. The method dynamically decreases the interface thickness parameter in relevant regions and simultaneously increases local mesh resolution, preventing numerical artifacts. We perform a detailed numerical simulation of pulsed jet atomization that shows a complex cascade of break-up mechanisms involving sheet rupture and filament formation. To understand the effect of refinement on the breakup, we analyze the droplet size distribution. The proposed approach opens up resolved simulations for various multiphase flow phenomena. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Comments: 6 pages, 5 figures

Scalable adaptive algorithms for next-generation multiphase flow simulations

Authors: Kumar Saurabh, Masado Ishii, Makrand A. Khanwale, Hari Sundar, Baskar Ganapathysubramanian

Abstract: High-fidelity flow simulations are indispensable when analyzing systems exhibiting multiphase flow phenomena. The accuracy of multiphase flow simulations is strongly contingent upon the finest mesh resolution used to represent the fluid-fluid interfaces. However, the increased resolution comes at a higher computational cost. In this work, we propose algorithmic advances that aim to reduce the comp… ▽ More High-fidelity flow simulations are indispensable when analyzing systems exhibiting multiphase flow phenomena. The accuracy of multiphase flow simulations is strongly contingent upon the finest mesh resolution used to represent the fluid-fluid interfaces. However, the increased resolution comes at a higher computational cost. In this work, we propose algorithmic advances that aim to reduce the computational cost without compromising on the physics by selectively detecting key regions of interest (droplets/filaments) that require significantly higher resolution. The framework uses an adaptive octree-based meshing framework that is integrated with PETSc's linear algebra solvers. We demonstrate scaling of the framework up to 114,688 processes on TACC's Frontera. Finally, we deploy the framework to simulate one of the most resolved simulations of primary jet atomization. This simulation -- equivalent to 35 trillion grid points on a uniform grid -- is 64 times larger than the current state-of-the-art simulations and provides unprecedented insights into an important flow physics problem with a diverse array of engineering applications. △ Less

Submitted 3 April, 2023; v1 submitted 24 September, 2022; originally announced September 2022.

Comments: 12 pages, 9 figures; Accepted for publication in Proceedings of 2023 IEEE International Parallel and Distributed Processing Symposium (IPDPS)

A projection-based, semi-implicit time-stepping approach for the Cahn-Hilliard Navier-Stokes equations on adaptive octree meshes

Authors: Makrand A. Khanwale, Kumar Saurabh, Masado Ishii, Hari Sundar, James A. Rossmanith, Baskar Ganapathysubramanian

Abstract: The Cahn-Hilliard Navier-Stokes (CHNS) system provides a computationally tractable model that can be used to effectively capture interfacial dynamics in two-phase fluid flows. In this work, we present a semi-implicit, projection-based finite element framework for solving the CHNS system. We use a projection-based semi-implicit time discretization for the Navier-Stokes equation and a fully-implicit… ▽ More The Cahn-Hilliard Navier-Stokes (CHNS) system provides a computationally tractable model that can be used to effectively capture interfacial dynamics in two-phase fluid flows. In this work, we present a semi-implicit, projection-based finite element framework for solving the CHNS system. We use a projection-based semi-implicit time discretization for the Navier-Stokes equation and a fully-implicit time discretization for the Cahn-Hilliard equation. We use a conforming continuous Galerkin (cG) finite element method in space equipped with a residual-based variational multiscale (RBVMS) formulation. Pressure is decoupled using a projection step, which results in two linear positive semi-definite systems for velocity and pressure, instead of the saddle point system of a pressure-stabilized method. All the linear systems are solved using an efficient and scalable algebraic multigrid (AMG) method. We deploy this approach on a massively parallel numerical implementation using parallel octree-based adaptive meshes. The overall approach allows the use of relatively large time steps with much faster time-to-solve than similar fully-implicit methods. We present comprehensive numerical experiments showing detailed comparisons with results from the literature for canonical cases, including the single bubble rise and Rayleigh-Taylor instability. △ Less

Submitted 23 December, 2022; v1 submitted 11 July, 2021; originally announced July 2021.

Comments: 51 pages, 18 Figures, version accepted for publication Journal of Computational Physics. arXiv admin note: text overlap with arXiv:2009.06628

Journal ref: Journal of Computational Physics, Volume 475 (2023) 111874

Interfacial area transport for bubbly-to-slug transition flows in small diameter pipes

Authors: Zhuoran Dang, Mamoru Ishii

Abstract: This study aims to experimentally investigate the two-group interfacial area transport in small diameter pipes. Experimental data focusing on the bubbly to slug transition regime, namely one-group to two-group transport region, are collected in a 12.7 mm vertical pipe under adiabatic, air-water conditions. The result shows the intergroup transfer in the small diameter pipe can be drastic, especial… ▽ More This study aims to experimentally investigate the two-group interfacial area transport in small diameter pipes. Experimental data focusing on the bubbly to slug transition regime, namely one-group to two-group transport region, are collected in a 12.7 mm vertical pipe under adiabatic, air-water conditions. The result shows the intergroup transfer in the small diameter pipe can be drastic, especially under low superficial liquid velocities. The cause of this phenomenon is mainly due to the large relative bubble size comparing to the pipe cross-sectional area. The wake entrainment effect could be enhanced by the small spherical bubbles that are acting like cap or slug bubbles in a medium-size pipe. Based on the experimental observation, a throughout analysis of the dependence of the drastic intergroup transfer is provided in this study. The models predicting the initiation of drastic intergroup transfer in small diameter pipes in terms of the bubble diameter and the void fraction are developed. These models are compared with the two-phase data among the different pipe sizes and the results show a good agreement. These newly developed models are applied to the IATE wake entrainment model by developing a transition function analogous to the sigmoid function. With the transition function, the revised IATE model is given the new ability on predicting the drastic intergroup transfer phenomenon. △ Less

Submitted 12 February, 2021; v1 submitted 9 November, 2020; originally announced November 2020.

Journal ref: International Journal of Heat and Mass Transfer, Volume 172, June 2021, 121095

Quantifying uncertainty in spatio-temporal changes of upper-ocean heat content estimates: an internationally coordinated comparison

Authors: Abhishek Savita, Catia M. Domingues, Tim Boyer, Viktor Gouretski, Masayoshi Ishii, Gregory C. Johnson, John M. Lyman, Josh K. Willis, Simon J. Marsland, William Hobbs, John A. Church, Didier P. Monselesan, Peter Dobrohotoff, Rebecca Cowley, Susan E. Wijffels

Abstract: The Earth system is accumulating energy due to human-induced activities. More than 90 percent of this energy has been stored in the ocean as heat since 1970, with about 64 percent of that in the upper 700 m. Differences in upper ocean heat content anomaly (OHCA) estimates, however, exist. Here, we evaluate spread in upper OHCA estimates arising from choices in instrumental bias corrections and map… ▽ More The Earth system is accumulating energy due to human-induced activities. More than 90 percent of this energy has been stored in the ocean as heat since 1970, with about 64 percent of that in the upper 700 m. Differences in upper ocean heat content anomaly (OHCA) estimates, however, exist. Here, we evaluate spread in upper OHCA estimates arising from choices in instrumental bias corrections and mapping methods, in addition to the effect of using a common ocean mask. The same dataset was mapped by six research groups for 1970 to 2008, with six instrumental bias corrections applied to expendable bathythermograph (XBT) data. We find that use of a common ocean mask may impact estimation of global OHCA by +- 13 percent. Uncertainty due to mapping method dominates over XBT bias correction at a global scale and is largest in the Indian Ocean and in the eddy-rich and frontal regions of all basins. Uncertainty due to XBT bias correction is largest in the Pacific Ocean within 30N to 30S. In both mapping and XBT cases, spread is higher since the 1990s. Important differences in spatial trends among mapping methods are found in the well-observed Northwest Atlantic and the poorly-observed Southern Ocean. Although our results cannot identify the best mapping or bias correction schemes, they identify where and when greater uncertainties exist, and so where further refinements may yield the largest improvements. Our results highlight the need for a future international coordination to evaluate performance of existing mapping methods. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Comments: Submitted to AMS Journal of Climate (30 July 2020). Feedback welcome. Please email: [email protected]

Two-phase interfacial structure of bubbly-to-slug transition flows in a 12.7 mm ID vertical tube

Authors: Zhuoran Dang, Guanyi Wang, Mamoru Ishii

Abstract: This experimental study focuses on the characteristics of air-water two-phase interfacial structure. Interfacial parameters including void fraction, interfacial area concentration, and bubble interfacial velocity are measured using four-sensor electrical conductivity probe on a 12.7 mm ID vertical tube. The tube size is approximately equal to the maximum distorted bubble size. Therefore, the bubbl… ▽ More This experimental study focuses on the characteristics of air-water two-phase interfacial structure. Interfacial parameters including void fraction, interfacial area concentration, and bubble interfacial velocity are measured using four-sensor electrical conductivity probe on a 12.7 mm ID vertical tube. The tube size is approximately equal to the maximum distorted bubble size. Therefore, the bubbly-to-slug transition characteristics can be different from in other sizes of tubes. Comparing with previous studies, this study provides an experimental database with a wide range on the bubbly-to-slug transition flows, with 4 different superficial liquid velocities (0.3, 0.5, 1.0, and 2.0 m/s) and void fraction ranging from 0.07 to 0.66. Experimental results show that the wall-peak void distribution does not appear in a small diameter tube under the bubbly-to-slug flow transition flow. The distribution is related with both void fraction and the relative bubble size to the tube size. In this sense, a new correlation of distribution parameter in the Drift Flux model is proposed based on the previous studies by Ishii and Hibiki et al. This experimental study can be a good reference for the model development of flow regime transition and the Interfacial Area Transport Equation. △ Less

Submitted 7 March, 2021; v1 submitted 3 September, 2020; originally announced September 2020.

Comments: 22 pages, 15 figures. Preprint submitted to International Journal of Heat and Mass Transfer

Journal ref: International Journal of Heat and Mass Transfer, Volume 165, Part A, 2021, 120556, ISSN 0017-9310,

A physics-informed reinforcement learning approach for the interfacial area transport in two-phase flow

Authors: Zhuoran Dang, Mamoru Ishii

Abstract: The prediction of interfacial structure in two-phase flow systems is difficult and challenging. In this paper, a novel physics-informed reinforcement learning-aided framework (PIRLF) for the interfacial area transport is proposed. A Markov Decision Process that describes the bubble transport is established by assuming that the development of two-phase flow is a stochastic process with Markov prope… ▽ More The prediction of interfacial structure in two-phase flow systems is difficult and challenging. In this paper, a novel physics-informed reinforcement learning-aided framework (PIRLF) for the interfacial area transport is proposed. A Markov Decision Process that describes the bubble transport is established by assuming that the development of two-phase flow is a stochastic process with Markov property. The framework aims to capture the complexity of two-phase flow using the advantage of reinforcement learning (RL) in discovering complex patterns with the help of the physical model (Interfacial Area Transport Equation) as reference. The details of the framework design are described including the design of the environment and the algorithm used in solving the RL problem. The performance of the PIRLF is tested through experiments using the experimental database for vertical upward bubbly air-water flows. The result shows a good performance of PIRLF with rRMSE of 6.556%. The case studies on the PIRLF performance also show that the type of reward function that is related to the physical model can affect the framework performance. Based on the study, the optimal reward function is established. The approaches to extending the capability of PIRLF are discussed, which can be a reference for the further development of this methodology. △ Less

Submitted 4 October, 2020; v1 submitted 6 August, 2019; originally announced August 2019.

Journal ref: International Journal of Heat and Mass Transfer, Volume 192, 15 August 2022, 122919

Two-phase flow regime prediction using LSTM based deep recurrent neural network

Authors: Zhuoran Dang, Mamoru Ishii

Abstract: Long short-term memory (LSTM) and recurrent neural network (RNN) has achieved great successes on time-series prediction. In this paper, a methodology of using LSTM-based deep-RNN for two-phase flow regime prediction is proposed, motivated by previous research on constructing deep RNN. The method is featured with fast response and accuracy. The built RNN networks are trained and tested with time-se… ▽ More Long short-term memory (LSTM) and recurrent neural network (RNN) has achieved great successes on time-series prediction. In this paper, a methodology of using LSTM-based deep-RNN for two-phase flow regime prediction is proposed, motivated by previous research on constructing deep RNN. The method is featured with fast response and accuracy. The built RNN networks are trained and tested with time-series void fraction data collected using impedance void meter. The result shows that the prediction accuracy depends on the depth of network and the number of layer cells. However, deeper and larger network consumes more time in predicting. △ Less

Submitted 30 March, 2019; originally announced April 2019.

Verification of operational solar flare forecast: Case of Regional Warning Center Japan

Authors: Yûki Kubo, Mitsue Den, Mamoru Ishii

Abstract: In this article, we discuss a verification study of an operational solar flare forecast in the Regional Warning Center (RWC) Japan. The RWC Japan has been issuing four-categorical deterministic solar flare forecasts for a long time. In this forecast verification study, we used solar flare forecast data accumulated over 16 years (from 2000 to 2015). We compiled the forecast data together with solar… ▽ More In this article, we discuss a verification study of an operational solar flare forecast in the Regional Warning Center (RWC) Japan. The RWC Japan has been issuing four-categorical deterministic solar flare forecasts for a long time. In this forecast verification study, we used solar flare forecast data accumulated over 16 years (from 2000 to 2015). We compiled the forecast data together with solar flare data obtained with the Geostationary Operational Environmental Satellites (GOES). Using the compiled data sets, we estimated some conventional scalar verification measures with 95% confidence intervals. We also estimated a multi-categorical scalar verification measure. These scalar verification measures were compared with those obtained by the persistence method and recurrence method. As solar activity varied during the 16 years, we also applied verification analyses to four subsets of forecast-observation pair data with different solar activity levels. We cannot conclude definitely that there are significant performance difference between the forecasts of RWC Japan and the persistence method, although a slightly significant difference is found for some event definitions. We propose to use a scalar verification measure to assess the judgment skill of the operational solar flare forecast. Finally, we propose a verification strategy for deterministic operational solar flare forecasting. △ Less

Submitted 25 July, 2017; originally announced July 2017.

Comments: 29 pages, 7 figures and 6 tables. Accepted for publication in Journal of Space Weather and Space Climate (SWSC)

Journal ref: Journal of Space Weather and Space Climate, 7, A20 (2017)

Scintillation characteristics of undoped and Cu+-doped Li2B4O7 single crystals

Authors: Masaaki Kobayashi, Mitsuru Ishii, Nachimuthu Senguttuvan

Abstract: Scintillation characteristics of undoped and Cu+-doped lithium tetraborate Li2B4O7 (LTB) were studied including optical transmittance, photoluminescence, radioluminescence for X- and gamma-rays, alpha/gamma ratio, and decay kinetics. The total time-integrated LYs in undoped and Cu+-doped LTB for X-rays are ~600 and ~760 ph/MeV (photons/MeV), respectively. The decay kinetics in undoped and Cu+-dope… ▽ More Scintillation characteristics of undoped and Cu+-doped lithium tetraborate Li2B4O7 (LTB) were studied including optical transmittance, photoluminescence, radioluminescence for X- and gamma-rays, alpha/gamma ratio, and decay kinetics. The total time-integrated LYs in undoped and Cu+-doped LTB for X-rays are ~600 and ~760 ph/MeV (photons/MeV), respectively. The decay kinetics in undoped and Cu+-doped LTB are similar to each other. Typical decay spectra for pulsed X-rays can be fitted with four exponentials: for fast (t1~0.8 ns, t2~25-50 ns), medium (t3~300-400 ns), and slow (t4~20-30 ms) components. The slow component occupies about 60% of the total LY, while the fast ones less than 10%. The 10-90% rise time was 163 ps. The alpha/gamma ratio was 0.18 for external 241Am alpha-rays. The obtained increase in LY due to Cu+ doping remains modest. The Cu+-induced emission contains both fast and slow components, requiring further studies of the emission mechanism to explain the fast component. △ Less

Submitted 12 March, 2015; originally announced March 2015.

Comments: 16 pages with 4 tables and 11 figures

Journal ref: Problemy Spektroskopii i Spektrometrii (Problems of Spectroscopy and Spectrometry, Ekaterinburg, UrFU) 34(2015)71-89

Subaru Imaging of Asymmetric Features in a Transitional Disk in Upper Scorpius

Authors: S. Mayama, J. Hashimoto, T. Muto, T. Tsukagoshi, N. Kusakabe, M. Kuzuhara, Y. Takahashi, T. Kudo, R. Dong, M. Fukagawa, M. Takami, M. Momose, J. P. Wisniewski, K. Follette, L. Abe, E. Akiyama, W. Brandner, T. Brandt, J. Carson, S. Egner, M. Feldt, M. Goto, C. A. Grady, O. Guyon, Y. Hayano , et al. (30 additional authors not shown)

Abstract: We report high-resolution (0.07 arcsec) near-infrared polarized intensity images of the circumstellar disk around the star 2MASS J16042165-2130284 obtained with HiCIAO mounted on the Subaru 8.2 m telescope. We present our $H$-band data, which clearly exhibits a resolved, face-on disk with a large inner hole for the first time at infrared wavelengths. We detect the centrosymmetric polarization patt… ▽ More We report high-resolution (0.07 arcsec) near-infrared polarized intensity images of the circumstellar disk around the star 2MASS J16042165-2130284 obtained with HiCIAO mounted on the Subaru 8.2 m telescope. We present our $H$-band data, which clearly exhibits a resolved, face-on disk with a large inner hole for the first time at infrared wavelengths. We detect the centrosymmetric polarization pattern in the circumstellar material as has been observed in other disks. Elliptical fitting gives the semimajor axis, semiminor axis, and position angle (P.A.) of the disk as 63 AU, 62 AU, and -14 $^{\circ}$, respectively. The disk is asymmetric, with one dip located at P.A.s of $\sim85^{\circ}$. Our observed disk size agrees well with a previous study of dust and CO emission at submillimeter wavelength with Submillimeter Array. Hence, the near-infrared light is interpreted as scattered light reflected from the inner edge of the disk. Our observations also detect an elongated arc (50 AU) extending over the disk inner hole. It emanates at the inner edge of the western side of the disk, extending inward first, then curving to the northeast. We discuss the possibility that the inner hole, the dip, and the arc that we have observed may be related to the existence of unseen bodies within the disk. △ Less

Submitted 14 November, 2012; originally announced November 2012.

Comments: 21 pages, 3 figures, published 2012 November 7 by ApJL, typo corrected

Journal ref: (2012) ApJL 760, L26

Toward a Reliable Gigabit Network - an Upgrade of the Spring-8 Network

Authors: T. Fukui, M. Ishii, R. Tanaka, T. Masuda, T. Ohata

Abstract: The SPring-8 controls network has maintained accelerator operations in high reliability and shown good performance during the past years. To cope with the increase of loads on the network due to faster data acquisition and the addition of equipment data, networking hardware has been installed in the last few years. The upgraded network replaces the original FDDI backbone and switches with mixed… ▽ More The SPring-8 controls network has maintained accelerator operations in high reliability and shown good performance during the past years. To cope with the increase of loads on the network due to faster data acquisition and the addition of equipment data, networking hardware has been installed in the last few years. The upgraded network replaces the original FDDI backbone and switches with mixed FDDI/gigabit ethernet and Layer-3 switches. It is necessary to keep the double ring topology for the FDDI and introduce link aggregation technology for the gigabit ethernet to maintain the full redundancy and bandwidth of the system. This paper will discuss the network performance of the gigabit ethernet including its latency and redundancy. We also discuss a future plan for the network including Quality-of-Service over the gigabit ethernet. △ Less

Submitted 9 November, 2001; originally announced November 2001.

Comments: International Conference on Accelerator and Large Experimental Physics Control Systems San Jose, California, November 27-30, 2001, (THDT005), 3 pages, PDF genarated by MS-Word 98 on MAC

Journal ref: eConf C011127 (2001) THDT005

Development of an Interpreter Program for an Equipment Control

Authors: Y. Furukawa, M. Ishii, T. Nakatani, T. Ohata

Abstract: A message oriented software scheme is used for the SPring-8 beamline control. In the early stage, we developed customized control programs for each beamline. As the number of beamlines increased, however, it became necessary to introduce a general software scheme that cloud handle the control sequence for every beamline. We developed a new server program, Command Interpreter (CI), as a software… ▽ More A message oriented software scheme is used for the SPring-8 beamline control. In the early stage, we developed customized control programs for each beamline. As the number of beamlines increased, however, it became necessary to introduce a general software scheme that cloud handle the control sequence for every beamline. We developed a new server program, Command Interpreter (CI), as a software framework. The CI interprets a high-level compound message issued from client programs and decomposes it to a set of primitive control messages. The message are sent to the VME computers afterwards. For flexibility, the operation sequences specific to the individual baemline component are standardized and defined in the interface definition files. Using the CI, the response time overhead is reduced to 26% and the XAFS measurement time also decreases by about 50%. △ Less

Submitted 9 November, 2001; originally announced November 2001.

Comments: Poster Presentation for the ICALEPCS'2001 Paper Status Number : WEAP033

Journal ref: eConf C011127 (2001) WEAP033