Showing 1–14 of 14 results for author: Intravaia, F

Force metrology with plane parallel plates: Final design review and outlook

Authors: Hamid Haghmoradi, Hauke Fischer, Alessandro Bertolini, Ivica Galić, Francesco Intravaia, Mario Pitschmann, Raphael Schimpl, René I. P. Sedmik

Abstract: During the past few decades, abundant evidence for physics beyond the two standard models of particle physics and cosmology was found. Yet, we are tapping into the dark regarding our understanding of the dark sector. For more than a century, open problems related to the nature of the vacuum remain unresolved. Besides the traditional high-energy frontier and cosmology, technological advancement pro… ▽ More During the past few decades, abundant evidence for physics beyond the two standard models of particle physics and cosmology was found. Yet, we are tapping into the dark regarding our understanding of the dark sector. For more than a century, open problems related to the nature of the vacuum remain unresolved. Besides the traditional high-energy frontier and cosmology, technological advancement provides complementary access to new physics via high-precision experiments. Among the latter, the Casimir And Non-Newtonian force EXperiment (\cannex{}) has successfully completed its proof-of-principle phase and will soon commence operation. Benefiting from its plane parallel plate geometry, both interfacial and gravity-like forces are maximized, leading to increased sensitivity. A wide range of dark sector forces, Casimir forces in and out of thermal equilibrium, and gravity will be tested. This article describes the final experimental design, its sensitivity, and expected results. △ Less

Submitted 16 March, 2024; originally announced March 2024.

Halevi's extension of the Euler-Drude model for plasmonic systems

Authors: Gino Wegner, Dan-Nha Huynh, N. Asger Mortensen, Francesco Intravaia, Kurt Busch

Abstract: The nonlocal response of plasmonic materials and nanostructures is usually described within a hydrodynamic approach which is based on the Euler-Drude equation. In this work, we reconsider this approach within linear response theory and employ Halevi's extension to this standard hydrodynamic model. After discussing the impact of this improved model, which we term the Halevi model, on the propagatio… ▽ More The nonlocal response of plasmonic materials and nanostructures is usually described within a hydrodynamic approach which is based on the Euler-Drude equation. In this work, we reconsider this approach within linear response theory and employ Halevi's extension to this standard hydrodynamic model. After discussing the impact of this improved model, which we term the Halevi model, on the propagation of longitudinal volume modes, we accordingly extend the Mie-Ruppin theory. Specifically, we derive the dispersion relation of cylindrical surface plasmons. This reveals a nonlocal, collisional damping term which is related to earlier phenomenological considerations of limited-mean-free-path effects and influences both, peak width and amplitude of corresponding resonances in the extinction spectrum. In addition, we transfer the Halevi model into the time-domain thereby revealing a novel, diffusive contribution to the current which shares certain similarities with Cattaneo-type currents and analyze the resulting hybrid, diffusive-wave-like motion. Further, we discuss the relation of the Halevi model to other approaches commonly used in the literature. Finally, we demonstrate how to implement the Halevi model into the Discontinuous-Galerkin Time-Domain finite-element Maxwell solver and are able to identify an oscillatory contribution to the diffusive current. The Halevi model thus captures a number of relevant features beyond the standard hydrodynamic model. Contrary to other extensions of the standard hydrodynamic model, its use in time-domain Maxwell solvers is straightforward -- especially due its affinity to a class of descriptions that allow for a clear distinction between bulk and surface response. This is of particular importance for applications in nano-plasmonics where nano-gap structures and other nano-scale features have to be modeled efficiently and accurately. △ Less

Submitted 12 September, 2022; originally announced September 2022.

Comments: 20 pages, 7 figures, 1 tables

Journal ref: Phys. Rev. B 107, 115425 (2023)

Time-domain modeling of interband transitions in plasmonic systems

Authors: Max Pfeifer, Dan-Nha Huynh, Gino Wegner, Francesco Intravaia, Ulf Peschel, Kurt Busch

Abstract: Efficient modeling of dispersive materials via time-domain simulations of the Maxwell equations relies on the technique of auxiliary differential equations. In this approach, a material's frequency-dependent permittivity is represented via a sum of rational functions, e.g. Lorentz-poles, and the associated free parameters are determined by fitting to experimental data. In the present work, we pres… ▽ More Efficient modeling of dispersive materials via time-domain simulations of the Maxwell equations relies on the technique of auxiliary differential equations. In this approach, a material's frequency-dependent permittivity is represented via a sum of rational functions, e.g. Lorentz-poles, and the associated free parameters are determined by fitting to experimental data. In the present work, we present a modified approach for plasmonic materials that requires considerably fewer fit parameters than traditional approaches. Specifically, we consider the underlying microscopic theory and, in the frequency domain, separate the hydrodynamic contributions of the quasi-free electrons in partially filled bands from the interband transitions. As an illustration, we apply our approach to gold and demonstrate how to treat the interband transitions within the effective model via connecting to the underlying electronic bandstructure, thereby assigning physical meaning to the remaining fit parameters. Finally, we show how to utilize this approach within the technique of auxiliary differential equations. Our approach can be extended to other plasmonic materials and leads to efficient time-domain simulations of plasmonic structures for frequency ranges where interband transitions have to be considered. △ Less

Submitted 9 September, 2022; originally announced September 2022.

Comments: 9 pages, 3 figures, 1 table

In der Unruhe liegt die Kraft

Authors: Francesco Intravaia, Daniel Reiche, Kurt Busch

Abstract: Fluctuations are ubiquitous in nature. They are one of the fundamental building blocks of quantum mechanics and are responsible for a wide variety of phenomena in many areas of physics, ranging from biology to cosmology. Far from any classical intuition, quantum fluctuations are for instance responsible for the appearance of forces between non-magnetic and electrically neutral objects in vacuum, w… ▽ More Fluctuations are ubiquitous in nature. They are one of the fundamental building blocks of quantum mechanics and are responsible for a wide variety of phenomena in many areas of physics, ranging from biology to cosmology. Far from any classical intuition, quantum fluctuations are for instance responsible for the appearance of forces between non-magnetic and electrically neutral objects in vacuum, which seem to arise out of nothing. Ever since, quantum fluctuations have fascinated basic research providing new insights into physics and their understanding is becoming increasingly important for various future technologies. -- Fluktuationen sind allgegenwärtig. Sie bilden einen fundamentalen Baustein der Quantenmechanik und sind verantwortlich für die unterschiedlichsten Phänomene, angefangen in der Biologie bis hin zur Kosmologie. Fern jeder klassischen Intuition findet man zum Beispiel Kräfte zwischen nichtmagnetischen und elektrisch neutralen Objekten. Einzig bedingt durch Quantenfluktuationen entstehen diese Kräfte wie aus dem Nichts. Seit jeher begeistern sie die Grundlagenforschung mit neuen Einsichten und gewinnen immer mehr an Bedeutung für verschiedene Zukunftstechnologien. △ Less

Submitted 7 May, 2022; originally announced May 2022.

Comments: 8 pages, 4 figures, 4 pictures. Overview paper in German. Appeared in a modified form in the May issue of the Physik Journal (journal of the German Physical Society - DPG)

Journal ref: Physik Journal, page 35 (May 2022)

Modeling electromagnetic resonators using quasinormal modes

Authors: Philip Trøst Kristensen, Kathrin Herrmann, Francesco Intravaia, Kurt Busch

Abstract: We present a bi-orthogonal approach for modeling the response of localized electromagnetic resonators using quasinormal modes, which represent the natural, dissipative eigenmodes of the system with complex frequencies. For many problems of interest in optics and nanophotonics, the quasinormal modes constitute a powerful modeling tool, and the bi-orthogonal approach provides a coherent, precise, an… ▽ More We present a bi-orthogonal approach for modeling the response of localized electromagnetic resonators using quasinormal modes, which represent the natural, dissipative eigenmodes of the system with complex frequencies. For many problems of interest in optics and nanophotonics, the quasinormal modes constitute a powerful modeling tool, and the bi-orthogonal approach provides a coherent, precise, and accessible derivation of the associated theory, enabling an illustrative connection between different modeling approaches that exist in the literature. △ Less

Submitted 1 October, 2019; originally announced October 2019.

Nonequilibrium atom-surface interaction with lossy multi-layer structures

Authors: Marty Oelschläger, Kurt Busch, Francesco Intravaia

Abstract: The impact of lossy multi-layer structures on nonequilibrium atom-surface interactions is discussed. Specifically, the focus lies on a fully non-Markovian and nonequilibrium description of quantum friction, the fluctuation-induced drag force acting on an atom moving at constant velocity and height above the multi-layer structures. Compared to unstructured bulk material, the drag force for multi-la… ▽ More The impact of lossy multi-layer structures on nonequilibrium atom-surface interactions is discussed. Specifically, the focus lies on a fully non-Markovian and nonequilibrium description of quantum friction, the fluctuation-induced drag force acting on an atom moving at constant velocity and height above the multi-layer structures. Compared to unstructured bulk material, the drag force for multi-layer systems is considerably enhanced and exhibits different regimes in its velocity and distance dependences. These features are linked to the appearance of coupled interface polaritons within the superlattice structures. Our results are not only useful for an experimental investigation of quantum friction but also highlight a way to tailor the interaction by simply modifying the structural composition of the multi-layer systems. △ Less

Submitted 4 April, 2018; originally announced April 2018.

Comments: 13 pages, 10 figures

Journal ref: Phys. Rev. A 97, 062507 (2018)

Plasmonic modes in nanowire dimers: A study based on the hydrodynamic Drude model including nonlocal and nonlinear effects

Authors: M. Moeferdt, T. Kiel, T. Sproll, F. Intravaia, K. Busch

Abstract: A combined analytical and numerical study of the modes in two distinct plasmonic nanowire systems is presented. The computations are based on a Discontinuous Galerkin Time-Domain approach and a fully nonlinear and nonlocal hydrodynamic Drude model for the metal is utilized. In the linear regime, these computations demonstrate the strong influence of nonlocality on the field distributions as well a… ▽ More A combined analytical and numerical study of the modes in two distinct plasmonic nanowire systems is presented. The computations are based on a Discontinuous Galerkin Time-Domain approach and a fully nonlinear and nonlocal hydrodynamic Drude model for the metal is utilized. In the linear regime, these computations demonstrate the strong influence of nonlocality on the field distributions as well as on the scattering and absorption spectra. Based on these results, second-harmonic generation efficiencies are computed over a frequency range that covers all relevant modes of the linear spectra. In order to interprete the physical mechanisms that lead to corresponding field distributions, the associated linear quasi-electrostatic problem is solved analytically via conformal transformation techniques. This provides an intuitive classification of the linear excitations of the systems that is then applied to the full Maxwell case. Based on this classification, group theory facilitates the determination of the selection rules for the efficient excitation of modes, both in the linear and the nonlinear regime. This leads to significantly enhanced second-harmonic generation via judiciously exploiting the system symmetries. These results regarding the mode structure and second-harmonic generation are of direct relevance to other nano-antenna systems. △ Less

Submitted 23 February, 2018; originally announced February 2018.

Comments: 11 pages, 9 figures, including Supplemental Material

Journal ref: Phys. Rev. B 97, 075431 (2018)

Determining graphene's induced band gap with magnetic and electric emitters

Authors: Julia FM Werra, Peter Krüger, Kurt Busch, Francesco Intravaia

Abstract: We present numerical and analytical results for the lifetime of emitters in close proximity to graphene sheets. Specifically, we analyze the contributions from different physical channels that participate in the decay processes. Our results demonstrate that measuring the emitters' decay rates provides an efficient route for sensing graphene's optoelectronic properties, notably the existence and si… ▽ More We present numerical and analytical results for the lifetime of emitters in close proximity to graphene sheets. Specifically, we analyze the contributions from different physical channels that participate in the decay processes. Our results demonstrate that measuring the emitters' decay rates provides an efficient route for sensing graphene's optoelectronic properties, notably the existence and size of a potential band gap in its electronic band structure. △ Less

Submitted 9 February, 2016; originally announced February 2016.

Journal ref: Phys. Rev. B 93, 081404(R) (2016)

TE resonances in graphene-dielectric structures

Authors: Julia F. M. Werra, Francesco Intravaia, Kurt Busch

Abstract: We investigate the dispersion relations of TE resonances in different graphene-dielectric structures. Previous work has shown that when a graphene layer is brought into contact with a dielectric material, a gap can appear in its electric band structure. This allows for the formation of TE-plasmons with unusual dispersion relations. In addition, if the dielectric has a finite thickness, graphene st… ▽ More We investigate the dispersion relations of TE resonances in different graphene-dielectric structures. Previous work has shown that when a graphene layer is brought into contact with a dielectric material, a gap can appear in its electric band structure. This allows for the formation of TE-plasmons with unusual dispersion relations. In addition, if the dielectric has a finite thickness, graphene strongly modifies the behavior of the waveguiding modes by introducing dissipation above a well-defined cutoff frequency thus providing the possibility of mode filtering. This cutoff and the properties of TE-plasmons are closely related to the pair-creation threshold of graphene thus representing quantum mechanical effects that manifest themselves in the electromagnetic response. △ Less

Submitted 5 January, 2016; v1 submitted 2 November, 2015; originally announced November 2015.

Journal ref: J. Opt. 18, 034001 (2016)

Fluorescence in nonlocal dissipative periodic structures

Authors: Francesco Intravaia, Kurt Busch

Abstract: We present an approach for the description of fluorescence from optically active material embedded in layered periodic structures. Based on an exact electromagnetic Green's tensor analysis, we determine the radiative properties of emitters such as the local photonic density of states, Lamb shifts, line widths etc. for a finite or infinite sequence of thin alternating plasmonic and dielectric layer… ▽ More We present an approach for the description of fluorescence from optically active material embedded in layered periodic structures. Based on an exact electromagnetic Green's tensor analysis, we determine the radiative properties of emitters such as the local photonic density of states, Lamb shifts, line widths etc. for a finite or infinite sequence of thin alternating plasmonic and dielectric layers. In the effective medium limit, these systems may exhibit hyperbolic dispersion relations so that the large wave-vector characteristics of all constituents and processes become relevant. These include the finite thickness of the layers, the nonlocal properties of the constituent metals, and local-field corrections associated with an emitter's dielectric environment. In particular, we show that the corresponding effects are non-additive and lead to considerable modifications of an emitter's luminescence properties. △ Less

Submitted 24 February, 2015; v1 submitted 12 December, 2014; originally announced December 2014.

Comments: 12 pages, 7 figures

Journal ref: Phys. Rev. A 91, 053836 (2015)

Spoof polariton enhanced modal density of states in planar nanostructured metallic cavities

Authors: P. S. Davids, F. Intravaia, D. A. R. Dalvit

Abstract: Spoof surface modes on nanostructured metallic surfaces are known to have tailorable dispersion dependent on the geometric characteristics of the periodic pattern. Here we examine the spoof plasmon dispersion on an isolated grating and a grating-planar mirror cavity configuration. The spoof polariton dispersion in the cavity is obtained using the scattering matrix approach, and the related differe… ▽ More Spoof surface modes on nanostructured metallic surfaces are known to have tailorable dispersion dependent on the geometric characteristics of the periodic pattern. Here we examine the spoof plasmon dispersion on an isolated grating and a grating-planar mirror cavity configuration. The spoof polariton dispersion in the cavity is obtained using the scattering matrix approach, and the related differential modal density of states is introduced to obtain the mode dispersion and classify the cavity polariton modes. The grating-mirror cavity geometry is an example of periodically nanostructured metals above a planar ground plane. The properties discussed here are relevant for applications ranging from thin electromagnetic perfect absorbers to near-field radiative heat transfer. △ Less

Submitted 16 May, 2014; originally announced May 2014.

Comments: 14 pages, 7 figures

Journal ref: Opt. Express 22, 12424 (2014)

Geometry-induced Casimir suspension of oblate bodies in fluids

Authors: Alejandro W. Rodriguez, M. T. Homer Reid, Francesco Intravaia, Alexander Woolf, Diego A. R. Dalvit, Federico Capasso, Steven G. Johnson

Abstract: We predict that a low-permittivity oblate body (disk-shaped object) above a thin metal substrate (plate with a hole) immersed in a fluidof intermediate permittivity will experience a meta-stable equilibrium (restoring force) near the center of the hole. Stability is the result of a geometry-induced transition in the sign of the force, from repulsive to attractive, that occurs as the disk approache… ▽ More We predict that a low-permittivity oblate body (disk-shaped object) above a thin metal substrate (plate with a hole) immersed in a fluidof intermediate permittivity will experience a meta-stable equilibrium (restoring force) near the center of the hole. Stability is the result of a geometry-induced transition in the sign of the force, from repulsive to attractive, that occurs as the disk approaches the hole---in planar or nearly-planar geometries, the same material combination yields a repulsive force at all separations in accordance with the Dzyaloshinskii--Lifshitz--Pitaevskii condition of fluid-induced repulsion between planar bodies. We explore the stability of the system with respect to rotations and lateral translations of the disks, and demonstrate interesting transitions (bifurcations) in the rotational stability of the disks as a function of their size. Finally, we consider the reciprocal situation in which the disk--plate materials are interchanged, and find that in this case the system also exhibits meta-stability. The forces in the system are sufficiently large to be observed in experiments and should enable measurements based on the diffusion dynamics of the suspended bodies. △ Less

Submitted 16 October, 2013; originally announced October 2013.

Journal ref: Phys. Rev. Lett. 111, 180402 (2013)

A quasi-analytical modal approach for computing Casimir interactions in periodic nanostructures

Authors: F. Intravaia, P. S. Davids, R. S. Decca, V. A. Aksyuk, D. Lopez, D. A. R. Dalvit

Abstract: We present an almost fully analytical technique for computing Casimir interactions between periodic lamellar gratings based on a modal approach. Our method improves on previous work on Casimir modal approaches for nanostructures by using the exact form of the eigenvectors of such structures, and computing eigenvalues by solving numerically a simple transcendental equation. In some cases eigenvalue… ▽ More We present an almost fully analytical technique for computing Casimir interactions between periodic lamellar gratings based on a modal approach. Our method improves on previous work on Casimir modal approaches for nanostructures by using the exact form of the eigenvectors of such structures, and computing eigenvalues by solving numerically a simple transcendental equation. In some cases eigenvalues can be solved for exactly, such as the zero frequency limit of gratings modeled by a Drude permittivity. Our technique also allows us to predict analytically the behavior of the Casimir interaction in limiting cases, such as the large separation asymptotics. The method can be generalized to more complex grating structures, and may provide a deeper understanding of the geometry-composition-temperature interplay in Casimir forces between nanostructures. △ Less

Submitted 29 August, 2012; originally announced August 2012.

Comments: 16 pages, 7 figures

Journal ref: Phys. Rev. A 86, 042101 (2012)

Strong Casimir force reduction through metallic surface nanostructuring

Authors: Francesco Intravaia, Stephan Koev, Il Woong Jung, A. Alec Talin, Paul S. Davids, Ricardo S. Decca, Vladimir A. Aksyuk, Diego A. R. Dalvit, Daniel Lopez

Abstract: The Casimir force between bodies in vacuum can be understood as arising from their interaction with an infinite number of fluctuating electromagnetic quantum vacuum modes, resulting in a complex dependence on the shape and material of the interacting objects. Becoming dominant at small separations, the force plays a significant role in nanomechanics and object manipulation at the nanoscale, leadin… ▽ More The Casimir force between bodies in vacuum can be understood as arising from their interaction with an infinite number of fluctuating electromagnetic quantum vacuum modes, resulting in a complex dependence on the shape and material of the interacting objects. Becoming dominant at small separations, the force plays a significant role in nanomechanics and object manipulation at the nanoscale, leading to a considerable interest in identifying structures where the Casimir interaction behaves significantly different from the well-known attractive force between parallel plates. Here we experimentally demonstrate that by nanostructuring one of the interacting metal surfaces at scales below the plasma wavelength, an unexpected regime in the Casimir force can be observed. Replacing a flat surface with a deep metallic lamellar grating with sub-100 nm features strongly suppresses the Casimir force and for large inter-surfaces separations reduces it beyond what would be expected by any existing theoretical prediction. △ Less

Submitted 1 October, 2013; v1 submitted 28 February, 2012; originally announced February 2012.

Comments: 11 pages, 8 figures

Journal ref: Nature Communications 4, Article number: 2515, 2013