-
Formation of high-aspect-ratio nanocavity in LiF crystal using a femtosecond of x-ray FEL pulse
Authors:
Sergey S. Makarov,
Sergey A. Grigoryev,
Vasily V. Zhakhovsky,
Petr Chuprov,
Tatiana A. Pikuz,
Nail A. Inogamov,
Victor V. Khokhlov,
Yuri V. Petrov,
Eugene Perov,
Vadim Shepelev,
Takehisa Shobu,
Aki Tominaga,
Ludovic Rapp,
Andrei V. Rode,
Saulius Juodkazis,
Mikako Makita,
Motoaki Nakatsutsumi,
Thomas R. Preston,
Karen Appel,
Zuzana Konopkova,
Valerio Cerantola,
Erik Brambrink,
Jan-Patrick Schwinkendorf,
István Mohacsi,
Vojtech Vozda
, et al. (8 additional authors not shown)
Abstract:
Sub-picosecond optical laser processing of metals is actively utilized for modification of a heated surface layer. But for deeper modification of different materials a laser in the hard x-ray range is required. Here, we demonstrate that a single 9-keV x-ray pulse from a free-electron laser can form a um-diameter cylindrical cavity with length of ~1 mm in LiF surrounded by shock-transformed materia…
▽ More
Sub-picosecond optical laser processing of metals is actively utilized for modification of a heated surface layer. But for deeper modification of different materials a laser in the hard x-ray range is required. Here, we demonstrate that a single 9-keV x-ray pulse from a free-electron laser can form a um-diameter cylindrical cavity with length of ~1 mm in LiF surrounded by shock-transformed material. The plasma-generated shock wave with TPa-level pressure results in damage, melting and polymorphic transformations of any material, including transparent and non-transparent to conventional optical lasers. Moreover, cylindrical shocks can be utilized to obtain a considerable amount of exotic high-pressure polymorphs. Pressure wave propagation in LiF, radial material flow, formation of cracks and voids are analyzed via continuum and atomistic simulations revealing a sequence of processes leading to the final structure with the long cavity. Similar results can be produced with semiconductors and ceramics, which opens a new pathway for development of laser material processing with hard x-ray pulses.
△ Less
Submitted 5 September, 2024;
originally announced September 2024.
-
Shock-induced melting and crystallization in titanium irradiated by ultrashort laser pulse
Authors:
Vasily Zhakhovsky,
Yury Kolobov,
Sergey Ashitkov,
Nail Inogamov,
Ivan Nelasov,
Sergey Manokhin,
Victor Khokhlov,
Denis Ilnitsky,
Yury Petrov,
Andrey Ovchinnikov,
Oleg Chefonov,
Dmitriy Sitnikov
Abstract:
Modification of titanium microstructure after propagation of a melting shock wave (SW) generated by a femtosecond laser pulse is investigated experimentally and analyzed using hydrodynamic and atomistic simulations. Scanning and transmission electron microscopy with analysis of microdiffraction is used to determine the microstructure of subsurface layers of pure titanium sample before and after mo…
▽ More
Modification of titanium microstructure after propagation of a melting shock wave (SW) generated by a femtosecond laser pulse is investigated experimentally and analyzed using hydrodynamic and atomistic simulations. Scanning and transmission electron microscopy with analysis of microdiffraction is used to determine the microstructure of subsurface layers of pure titanium sample before and after modification. We found that two layers of modified titanium are formed beneath the surface. A top surface polycrystalline layer of nanoscale grains is formed from a shock-molten layer via rapid crystallization. In a deeper subsurface layer, where the shock-induced melting becomes impossible due attenuation of SW, recrystallization of plastically deformed titanium leads to grain size changes in comparison with intact titanium. Molecular dynamics simulation of single-crystal titanium reveals that the SW front continues to melt/liquefy even after its temperature drops below the melting curve $T_m(P)$. The enormous shear stress generated in a narrow SW front leads to collapse/amorphization of the crystal lattice and formation of a supercooled metastable melt. Such melt crystallizes in an unloading tail of SW until its temperature becomes higher than $T_m(P)$ due to a rapid pressure drop. Later, crystallization of the subsurface molten layer will continue after the heat leaves it. After the shear stress drops below $\sim 12$GPa within the SW front, such the cold mechanical melting ceases giving place to the shock-induced plastic deformations. The depth of modification is limited by SW attenuation to the Hugoniot elastic limit, and can reach several micrometers. The obtained results reveal the basic physical mechanisms of surface hardening of metals by ultrashort laser pulses.
△ Less
Submitted 15 June, 2023;
originally announced June 2023.
-
Direct imaging of shock wave splitting in diamond at Mbar pressures
Authors:
S. S. Makarov,
S. A. Dyachkov,
T. A. Pikuz,
K. Katagiri,
V. V. Zhakhovsky,
N. A. Inogamov,
V. A. Khokhlov,
A. S. Martynenko,
B. Albertazzi,
G. Rigon,
P. Mabey,
N. Hartley,
Y. Inubushi,
K. Miyanishi,
K. Sueda,
T. Togashi,
M. Yabashi,
T. Yabuuchi,
R. Kodama,
S. A. Pikuz,
M. Koenig,
N. Ozaki
Abstract:
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under me…
▽ More
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under megabar (Mbar) pressure, even a solid with high strength exhibits plastic properties, causing the shock wave to split in two. This phenomenon is described by theoretical models, but without direct experimental measurements to confirm them, their validity is still in doubt. Here, we present the results of an experiment in which the evolution of the coupled elastic-plastic wave structure in diamond was directly observed and studied with submicron spatial resolution, using the unique capabilities of the X-ray free-electron laser. The direct measurements allowed, for the first time, the fitting and validation of a strength model for diamond in the range of several Mbar by performing continuum mechanics simulations in 2D geometry. The presented experimental approach to the study of shock waves in solids opens up new possibilities for the direct verification and construction of the equations of state of matter in the ultra-high pressure range, which are relevant for the solution of a variety of problems in high energy density physics.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Laser ablation in liquid: bridge from a plasma stage to bubble formation
Authors:
N. A. Inogamov,
V. A. Khokhlov,
Yu. V. Petrov,
V. V. Zhakhovsky
Abstract:
Laser ablation through liquid is an important process that have to be studied for applications which use laser ablation in liquid (LAL) and laser shock peening (LSP). LAL is employed for production of suspensions of nanoparticles, while LSP is applied to increase hardness and fatique/corrosion resistance properties of a surface layer. A bubble appears in liquid around the laser spot focused at a t…
▽ More
Laser ablation through liquid is an important process that have to be studied for applications which use laser ablation in liquid (LAL) and laser shock peening (LSP). LAL is employed for production of suspensions of nanoparticles, while LSP is applied to increase hardness and fatique/corrosion resistance properties of a surface layer. A bubble appears in liquid around the laser spot focused at a target surface after strong enough laser pulse. In the paper we connect the early quasi-plane heated layer created by a pulse in liquid and the bubble forming at much later stages. In the previous works these early stage from one side and the late stage from another side existed mainly as independent entities. At least, quantitative links between them were unknown. We consider how the quasi-plane heated layer of liquid forms thank to thermal conduction, how gradually conduction becomes weaker, and how the heated layer of liquid nearly adiabatically expands to few orders of magnitude in volume during the drop of pressure. Our molecular dynamics simulations show that the heated layer is filled by the diffusive atomic metal-liquid mixture. Metal atoms began to condense into nanoparticles (NP) when they meet cold liquid outside the edge of a mixing zone. This process limits diffusive expansion of metal atoms, because diffusive ability of NP is less than this ability for individual atoms. Thus the mixture expands together with hot liquid, and the NPs approximately homogeneously fill an interior of a bubble.
△ Less
Submitted 20 October, 2019;
originally announced October 2019.
-
Condensation of laser produced gold plasma during expansion and cooling in water environment
Authors:
Yu. V. Petrov,
N. A. Inogamov,
V. V. Zhakhovsky,
V. A. Khokhlov
Abstract:
The ecologically best way to produce nanoparticles (NP) is based on laser ablation in liquid (LAL). In the considered here case the LAL means that a gold target is irradiated through transparent water. During and after irradiation the heated material from surface of a target forms a plume which expands into liquid.
In this paper we study a reach set of physical processes mixed with complicated h…
▽ More
The ecologically best way to produce nanoparticles (NP) is based on laser ablation in liquid (LAL). In the considered here case the LAL means that a gold target is irradiated through transparent water. During and after irradiation the heated material from surface of a target forms a plume which expands into liquid.
In this paper we study a reach set of physical processes mixed with complicated hydrodynamic phenomena which all accompany LAL. These theoretical and simulation investigations are very important for practical applications. Laser pulses with different durations $τ_L$ covering 5-th orders of magnitudes range from 0.1 ps to 0.5 ns and large absorbed fluences $F_{abs}$ near optical breakdown of liquid are compared. It is shown that the trajectory of the contact boundary with liquid at the middle and late stages after passing of the instant of maximum intensity of the longest pulse are rather similar for very different pulse durations (of course at comparable energies $F_{abs});$ we consider the pulses with a Gaussian temporal shape $I\propto \exp(-t^2/τ_L^2).$ We follow how hot (few eV range) dense gold plasma expands, cools down, intersects a saturation curve, and condenses into NPs.
These NPs appear first inside the water-gold diffusively mixed intermediate layer where gold vapor has the lowest temperature. Later in time pressure around the gold-water contact drops down below critical pressure for water. Thus NPs find themselves in gaseous water bubble where density of water gradually decreases to $10^{-4}-10^{-5}$ g/cm$\!^3$ at the instant of maximum expansion of a bubble.
△ Less
Submitted 24 December, 2018;
originally announced December 2018.
-
Laser-induced ablation of metal in liquid
Authors:
Yu. V. Petrov,
V. A. Khokhlov,
V. V. Zhakhovsky,
N. A. Inogamov
Abstract:
Laser ablation in liquid (LAL) is important perspective way to compose nanoparticles (NP) necessary for modern technologies. LAL is not fully understood. Deep understanding is necessary to optimize processes and decrease high price of the LAL NPs.
Today there are two groups of studies: in one of them scientists go from analyzing of bubble dynamics (thus they proceed from the late stages), while…
▽ More
Laser ablation in liquid (LAL) is important perspective way to compose nanoparticles (NP) necessary for modern technologies. LAL is not fully understood. Deep understanding is necessary to optimize processes and decrease high price of the LAL NPs.
Today there are two groups of studies: in one of them scientists go from analyzing of bubble dynamics (thus they proceed from the late stages), while in another one scientists investigate early stages of ablation. In the present paper we consider the process as whole: from ablation and up to formation of a bubble and its inflation. Thus we cover extremely wide range of spatiotemporal scales. We consider role of absorbed energy and duration of pulse (femtosecond, multi-picosecond, nanosecond). Importance of supercritical states is emphasized. Diffusive atomic and hydrodynamic mixing due to Rayleigh-Taylor instability and their mutual interdependence are described. Liquid near contact with metal is heated by dissipation in strong shock and due to small but finite heat conduction in liquid; metal absorbing laser energy is hot and thus it serves as a heater for liquid. Spatial expansion and cooling of atomically mixed liquid and metal causes condensation of metal into NPs when pressure drops below critical pressure for metal. Development of bubble takes place during the next stages of decrease of pressure below critical parameters for liquid and below ambient pressure in liquid. Thin hot layer of liquid near contact expands in volume to many orders of magnitude filling the inflating bubble.
△ Less
Submitted 21 December, 2018;
originally announced December 2018.
-
Formation of solitary microstructure and ablation into transparent dielectric by a subnanosecond laser pulse
Authors:
V. A. Khokhlov,
N. A. Inogamov,
V. V. Zhakhovsky,
Yu. V. Petrov
Abstract:
Laser ablation in liquid (LAL) is important technique used for formation of nanoparticles (NP). The LAL processes cover logarithmically wide range of spatiotemporal scales and is not fully understood. The NP produced by LAL are rather expensive, thus optimization of involved processes is valuable. As the first step to such optimizations more deep understanding is necessary. We employ physical mode…
▽ More
Laser ablation in liquid (LAL) is important technique used for formation of nanoparticles (NP). The LAL processes cover logarithmically wide range of spatiotemporal scales and is not fully understood. The NP produced by LAL are rather expensive, thus optimization of involved processes is valuable. As the first step to such optimizations more deep understanding is necessary. We employ physical models and computer simulations by thermodynamic, hydrodynamic, and molecular dynamics codes in this direction. Absorbing light metal expanding into transparent solid or liquid dielectrics is considered. We analyze an interplay between diffusion, hydrodynamic instability, and decrease of surface tension down to zero value caused by strong heating and compression transferring matter into state of overcritical fluids. The primary NPs appear during expansion and cooling of diffusion zone when pressure in this zone drops below critical pressure for a metal. Long evolution from the overcritical states to states below a critical point for a metal and down to critical point of liquid and deeply down to surrounding pressure of 1 bar is followed. Conductive heating of liquid from hot metal is significant.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
Ultrashort pulse action onto thin film on substrate: Qualitative model of shock propagation in substrate explaining phenomenon of fast growth of a hole with increase of absorbed energy
Authors:
V. V. Shepelev,
N. A. Inogamov,
V. A. Khokhlov,
P. A. Danilov,
S. I. Kudryashov,
A. A. Kuchmizhak,
O. B. Vitrik
Abstract:
Thin films on substrate are important class of targets for surface nanomodification for plasmonic or sensoric applications. There are many papers devoted to this problem. But all of them are concentrated on dynamics of a film, paying small attention to substrate. In these papers the substrate is just an object absorbing the first shock. Here we present another point of view directed onto dynamics…
▽ More
Thin films on substrate are important class of targets for surface nanomodification for plasmonic or sensoric applications. There are many papers devoted to this problem. But all of them are concentrated on dynamics of a film, paying small attention to substrate. In these papers the substrate is just an object absorbing the first shock. Here we present another point of view directed onto dynamics of a substrate. We consider (i) generation of a shock wave (SW) in a support by impact of a contact; (ii) transition from one-dimensional to two-dimensional (2D) propagation of SW; (iii) we analyze lateral propagation of the SW along a film-support contact; and (iv) we calculate pressure in the compressed layer behind the decaying SW. This positive pressure acting from substrate to the film accelerates the film in direction to vacuum. Above some threshold, velocity of accelerated film is enough to separate the film from support. In these cases the circle of separation is significantly wider than the circle of the focal laser spot on film surface. Absorbed laser heat exponentially decays around an irradiated spot $F=F_{\rm c} \exp(-r^2/R_{\rm L}^2)$, where $R_{\rm L}$ is radius of a Gaussian beam, $F$ and $F_{\rm c}$ are local and central fluences, $r$ is a radius from the axis. While the law of decay for the 2D SW in substrate is the power law. Therefore in our case of powerful laser action the edge of a separation circle is defined by propagation of the SW in the support.
△ Less
Submitted 27 November, 2018;
originally announced November 2018.
-
Dynamics of supported ultrathin molybdenum films driven by strong short laser impact
Authors:
V A Khokhlov,
Yu V Petrov,
N A Inogamov,
K P Migdal,
J Winter,
C Aichele,
S Rapp,
H P Huber
Abstract:
We consider expansion, break off, and flight of 10 nm molybdenum film deposited onto glass support. These events are initiated by action of subpicosecond laser pulse onto film. Approximations for two-temperature equation of state and electron--ion coupling parameter are developed. Heat conduction is unimportant because film is ultrathin and because radius of a laser beam is rather large $\sim 10$…
▽ More
We consider expansion, break off, and flight of 10 nm molybdenum film deposited onto glass support. These events are initiated by action of subpicosecond laser pulse onto film. Approximations for two-temperature equation of state and electron--ion coupling parameter are developed. Heat conduction is unimportant because film is ultrathin and because radius of a laser beam is rather large $\sim 10$ $μ$m (thus lateral thermal spreading is insignificant at the considered time scale). We use two-temperature one-dimensional hydrodynamic code to follow evolution of laser induced flow. Additional code for treating transmission and reflection of a monochromatic electromagnetic wave is developed. It is applied to describe interference between transmitted and reflected waves in the layered structure appearing thanks to laser induced expansion and separation of a film.
△ Less
Submitted 26 November, 2018;
originally announced November 2018.
-
Expansion and fragmentation of liquid metal droplet by a short laser pulse
Authors:
S. Yu. Grigoryev,
B. V. Lakatosh,
M. S. Krivokorytov,
V. V. Zhakhovsky,
S. A. Dyachkov,
D. K. Ilnitsky,
K. P. Migdal,
N. A. Inogamov,
A. Yu. Vinokhodov,
V. O. Kompanets,
Yu. V. Sidelnikov,
V. M. Krivtsun,
K. N. Koshelev,
V. V. Medvedev
Abstract:
We report an experimental and numerical investigation of the fragmentation mechanisms of micrometer-sized metal droplet irradiated by ultrashort laser pulses. The results of the experiment show that the fast one-side heating of such a droplet may lead to either symmetric or asymmetric expansion followed by different fragmentation scenarios. To unveil the underlying processes leading to fragmentati…
▽ More
We report an experimental and numerical investigation of the fragmentation mechanisms of micrometer-sized metal droplet irradiated by ultrashort laser pulses. The results of the experiment show that the fast one-side heating of such a droplet may lead to either symmetric or asymmetric expansion followed by different fragmentation scenarios. To unveil the underlying processes leading to fragmentation we perform simulation of liquid-tin droplet expansion produced by the initial conditions similar to those in experiment using the smoothed particle hydrodynamics (SPH) method. Simulation demonstrates that a thin heated surface layer generates a ultrashort shock wave propagating from the frontal side to rear side of the droplet. Convergence of such shock wave followed by a rarefaction tale to the droplet center results in the cavitation of material inside the central region by the strong tensile stress. Reflection of the shock wave from the rear side of droplet produces another region of highly stretched material where the spallation may occur producing a thin spallation layer moving with a velocity higher than expansion of the central shell after cavitation. It is shown both experimentally and numerically that the threshold laser intensity necessary for the spallation is higher than the threshold required to induce cavitation in the central region of droplet. Thus, the regime of asymmetrical expansion is realized if the laser intensity exceeds the spallation threshold. The transverse and longitudinal expansion velocities obtained in SPH simulations of different regimes of expansion are agreed well with our experimental data.
△ Less
Submitted 5 July, 2018;
originally announced July 2018.
-
Laser Ablation of Gold into Water: near Critical Point Phenomena and Hydrodynamic Instability
Authors:
Nail Inogamov,
Vasily Zhakhovsky,
Viktor Khokhlov
Abstract:
Laser ablation of gold irradiated through the transparent water is studied.
We follow dynamics of gold expansion into the water along very long (up to 200 ns) time interval. This is significant because namely at these late times pressure at a contact boundary between gold (Au) and water decreases down to the saturation pressure of gold.
Thus the saturation pressure begins to influence dynamics…
▽ More
Laser ablation of gold irradiated through the transparent water is studied.
We follow dynamics of gold expansion into the water along very long (up to 200 ns) time interval. This is significant because namely at these late times pressure at a contact boundary between gold (Au) and water decreases down to the saturation pressure of gold.
Thus the saturation pressure begins to influence dynamics near the contact.
The inertia of displaced water decelerates the contact.
In the reference frame connected with the contact, the deceleration is equivalent to the free fall acceleration in a gravity field.
Such conditions are favorable for the development of Rayleigh-Taylor instability (RTI) because heavy fluid (gold) is placed above the light one (water) in a gravity field.
We extract the increment of RTI from 2T-HD 1D runs.
Surface tension and especially viscosity significantly dump the RTI gain during deceleration. Atomistic simulation with Molecular Dynamics method combined with Monte-Carlo method (MD-MC) for large electron heat conduction in gold is performed to gain a clear insight into the underlying mechanisms. MD-MC runs show that significant amplification of surface perturbations takes place.
These perturbations start just from thermal fluctuations and the noise produced by bombardment of the atmosphere by fragments of foam.
The perturbations achieve amplification enough to separate the droplets from the RTI jets of gold. Thus the gold droplets fall into the water.
△ Less
Submitted 20 March, 2018;
originally announced March 2018.
-
Laser-induced Translative Hydrodynamic Mass Snapshots: mapping at nanoscale
Authors:
X. W. Wang,
A. A. Kuchmizhak,
X. Li,
S. Juodkazis,
O. B. Vitrik,
Yu. N. Kulchin,
V. V. Zhakhovsky,
P. A. Danilov,
A. A. Ionin,
S. I. Kudryashov,
A. A. Rudenko,
N. A. Inogamov
Abstract:
Nanoscale thermally assisted hydrodynamic melt perturbations induced by ultrafast laser energy deposition in noble-metal films produce irreversible nanoscale translative mass redistributions and results in formation of radially-symmetric frozen surface structures. We demonstrate that the final three-dimensional (3D) shape of the surface structures formed after resolidification of the molten part o…
▽ More
Nanoscale thermally assisted hydrodynamic melt perturbations induced by ultrafast laser energy deposition in noble-metal films produce irreversible nanoscale translative mass redistributions and results in formation of radially-symmetric frozen surface structures. We demonstrate that the final three-dimensional (3D) shape of the surface structures formed after resolidification of the molten part of the film is shown to be governed by incident laser fluence and, more importantly, predicted theoretically via molecular dynamics modeling. Considering the underlying physical processes associated with laser-induced energy absorption, electron-ion energy exchange, acoustic relaxation and hydrodynamic flows, the theoretical approach separating slow and fast physical processes and combining hybrid analytical two-temperature calculations, scalable molecular-dynamics simulations, and a semi-analytical thin-shell model was shown to provide accurate prediction of the final nanoscale solidified morphologies, fully consistent with direct electron-microscopy visualization of nanoscale focused ion-beam cuts of the surface structures produced at different incident laser fluences. Finally, these results are in reasonable quantitative agreement with mass distribution profiles across the surface nanostructures, provided by their noninvasive and non-destructive nanoscale characterization based on energy-dispersive x-ray fluorescence spectroscopy, operating at variable electron-beam energies.
△ Less
Submitted 4 May, 2017; v1 submitted 16 March, 2017;
originally announced March 2017.
-
Simulations of short pulse laser-matter interaction
Authors:
N. A. Inogamov,
V. V. Zhakhovsky
Abstract:
Studies of ultra-fast laser-matter interaction are important for many applications. Such interaction triggers extreme physical processes which are localized in the range from $\sim 10$ nanometers to micron spatial scales and developing within picosecond$-$nanosecond time range. Thus the experimental observations are difficult and methods of applied mathematics are necessary to understand these pro…
▽ More
Studies of ultra-fast laser-matter interaction are important for many applications. Such interaction triggers extreme physical processes which are localized in the range from $\sim 10$ nanometers to micron spatial scales and developing within picosecond$-$nanosecond time range. Thus the experimental observations are difficult and methods of applied mathematics are necessary to understand these processes. Here we describe our simulation approaches and present solutions for a laser problem significant for applications. Namely, the processes of melting, a liquid jet formation, and its rupture are considered. Motion with the jet is caused by a short $\sim 0.1-1$ ps pulse illuminating a small spot on a surface of a thin $\sim 10-100$ nm film deposited onto substrate.
△ Less
Submitted 17 January, 2017;
originally announced January 2017.
-
Spallative ablation of dielectrics by X-ray laser
Authors:
N. A. Inogamov,
V. V. Zhakhovsky,
A. Ya. Faenov,
V. A. Khokhlov,
V. V. Shepelev,
I. Yu. Skobelev,
Y. Kato,
M. Tanaka,
T. A. Pikuz,
M. Kishimoto,
M. Ishino,
M. Nishikino,
Y. Fukuda,
S. V. Bulanov,
T. Kawachi,
Yu. V. Petrov,
S. I. Anisimov,
V. E. Fortov
Abstract:
Short laser pulse in wide range of wavelengths, from infrared to X-ray, disturbs electron-ion equilibrium and rises pressure in a heated layer. The case where pulse duration $τ_L$ is shorter than acoustic relaxation time $t_s$ is considered in the paper. It is shown that this short pulse may cause thermomechanical phenomena such as spallative ablation regardless to wavelength. While the physics…
▽ More
Short laser pulse in wide range of wavelengths, from infrared to X-ray, disturbs electron-ion equilibrium and rises pressure in a heated layer. The case where pulse duration $τ_L$ is shorter than acoustic relaxation time $t_s$ is considered in the paper. It is shown that this short pulse may cause thermomechanical phenomena such as spallative ablation regardless to wavelength. While the physics of electron-ion relaxation on wavelength and various electron spectra of substances: there are spectra with an energy gap in semiconductors and dielectrics opposed to gapless continuous spectra in metals. The paper describes entire sequence of thermomechanical processes from expansion, nucleation, foaming, and nanostructuring to spallation with particular attention to spallation by X-ray pulse.
△ Less
Submitted 21 December, 2009; v1 submitted 16 December, 2009;
originally announced December 2009.
-
Two-temperature relaxation and melting after absorption of femtosecond laser pulse
Authors:
N. A. Inogamov,
V. V. Zhakhovskii,
S. I. Ashitkov,
V. A. Khokhlov,
Yu. V. Petrov,
P. S. Komarov,
M. B. Agranat,
S. I. Anisimov,
K. Nishihara
Abstract:
The theory and experiments concerned with the electron-ion thermal relaxation and melting of overheated crystal lattice constitute the subject of this paper. The physical model includes two-temperature equation of state, many-body interatomic potential, the electron-ion energy exchange, electron thermal conductivity, and optical properties of solid, liquid, and two phase solid-liquid mixture. Tw…
▽ More
The theory and experiments concerned with the electron-ion thermal relaxation and melting of overheated crystal lattice constitute the subject of this paper. The physical model includes two-temperature equation of state, many-body interatomic potential, the electron-ion energy exchange, electron thermal conductivity, and optical properties of solid, liquid, and two phase solid-liquid mixture. Two-temperature hydrodynamics and molecular dynamics codes are used. An experimental setup with pump-probe technique is used to follow evolution of an irradiated target with a short time step 100 fs between the probe femtosecond laser pulses. Accuracy of measurements of reflection coefficient and phase of reflected probe light are ~1% and $\sim 1\un{nm}$, respectively. It is found that,
{\it firstly}, the electron-electron collisions make a minor contribution to a light absorbtion in solid Al at moderate intensities;
{\it secondly}, the phase shift of a reflected probe results from heating of ion subsystem and kinetics of melting of Al crystal during $0<t<4\un{ps},$ where $t$ is time delay between the pump and probe pulses measured from the maximum of the pump;
{\it thirdly} the optical response of Au to a pump shows a marked contrast to that of Al on account of excitation of \textit{d}-electrons
△ Less
Submitted 15 December, 2008;
originally announced December 2008.
-
Exact Expansion Law for Richtmyer-Meshkov Turbulent Mixing Zone
Authors:
N. A. Inogamov,
A. M. Oparin
Abstract:
Development of the Richtmyer-Meshkov instability leads to mixing of two substances separated by contact boundary. Mixture of two fluids is confined between two mixing fronts. Universal asymptotics follows the transition stage at late time. Functions which describe the fronts penetration asymptoticaly transform to power law dependences. Mixing is acompanied by cascade of enlarging of dominant sca…
▽ More
Development of the Richtmyer-Meshkov instability leads to mixing of two substances separated by contact boundary. Mixture of two fluids is confined between two mixing fronts. Universal asymptotics follows the transition stage at late time. Functions which describe the fronts penetration asymptoticaly transform to power law dependences. Mixing is acompanied by cascade of enlarging of dominant scale of a turbulent mixing zone. The exponents of the power laws are: 2/5 for 2D and 1/3 for 3D cases. These exact exponents are calculated in our work. They are determined by the mechanism of redistribution of momentum from small into the large scales.
△ Less
Submitted 24 March, 2005;
originally announced March 2005.
-
Three-Dimensional Morphology of Vortex Interfaces Driven by Rayleigh-Taylor or Richtmyer-Meshkov Instability
Authors:
N. A. Inogamov,
M. Tricottet,
A. M. Oparin,
S. Bouquet
Abstract:
We study the 3D topology of Rayleigh-Taylor (RT) and Richtmyer-Meshkov (RM) single-modes, which includes bubbles, jets and saddle points. We present an analytic description of the interface as a whole, for arbitrary time-dependant acceleration g(t). The dependance of morphology on the lattice - Hexagonal, square or triangular -of bubbles are investigated. RM accelerations in the case of a large…
▽ More
We study the 3D topology of Rayleigh-Taylor (RT) and Richtmyer-Meshkov (RM) single-modes, which includes bubbles, jets and saddle points. We present an analytic description of the interface as a whole, for arbitrary time-dependant acceleration g(t). The dependance of morphology on the lattice - Hexagonal, square or triangular -of bubbles are investigated. RM accelerations in the case of a large density ratio produce jets well separated from each other while, in RT case, jets are connected by liquid sheets. We compare our analytic results to numerical simulations.
△ Less
Submitted 25 April, 2001;
originally announced April 2001.
