-
Formation of highly stable interfacial nitrogen gas hydrate overlayers under ambient conditions
Authors:
Chung-Kai Fang,
Cheng-Hao Chuang,
Chih-Wen Yang,
Zheng-Rong Guo,
Wei-Hao Hsu,
Chia-Hsin Wang,
Ing-Shouh Hwang
Abstract:
Surfaces (interfaces) dictate many physical and chemical properties of solid materials and adsorbates considerably affect these properties. Nitrogen molecules, which are the most abundant constituent in ambient air, are considered to be inert. Our study combining atomic force microscopy (AFM), X-ray photoemission spectroscopy (XPS), and thermal desorption spectroscopy (TDS) revealed that nitrogen…
▽ More
Surfaces (interfaces) dictate many physical and chemical properties of solid materials and adsorbates considerably affect these properties. Nitrogen molecules, which are the most abundant constituent in ambient air, are considered to be inert. Our study combining atomic force microscopy (AFM), X-ray photoemission spectroscopy (XPS), and thermal desorption spectroscopy (TDS) revealed that nitrogen and water molecules can self-assemble into two-dimensional domains, forming ordered stripe structures on graphitic surfaces in both water and ambient air. The stripe structures of this study were composed of approximately 90% and 10% water and nitrogen molecules, respectively, and survived in ultra-high vacuum (UHV) conditions at temperatures up to approximately 350 K. Because pure water molecules completely desorb from graphitic surfaces in a UHV at temperatures lower than 200 K, our results indicate that the incorporation of nitrogen molecules substantially enhanced the stability of the crystalline water hydrogen bonding network. Additional studies on interfacial gas hydrates can provide deeper insight into the mechanisms underlying formation of gas hydrates.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Rapid suppression of quantum many-body magnetic exciton in doped van der Waals antiferromagnet (Ni,Cd)PS3
Authors:
Junghyun Kim,
Woongki Na,
Jonghyeon Kim,
Pyeongjae Park,
Kaixuan Zhang,
Inho Hwang,
Young-Woo Son,
Jae Hoon Kim,
Hyeonsik Cheong,
Je-Geun Park
Abstract:
The unique discovery of magnetic exciton in van der Waals antiferromagnet NiPS3 arises between two quantum many-body states of a Zhang-Rice singlet excited state and a Zhang-Rice triplet ground state. Simultaneously, the spectral width of photoluminescence originating from this exciton is exceedingly narrow as 0.4 meV. These extraordinary properties, including the extreme coherence of the magnetic…
▽ More
The unique discovery of magnetic exciton in van der Waals antiferromagnet NiPS3 arises between two quantum many-body states of a Zhang-Rice singlet excited state and a Zhang-Rice triplet ground state. Simultaneously, the spectral width of photoluminescence originating from this exciton is exceedingly narrow as 0.4 meV. These extraordinary properties, including the extreme coherence of the magnetic exciton in NiPS3, beg many questions. We studied doping effects using Ni1-xCdxPS3 using two experimental techniques and theoretical studies. Our experimental results show that the magnetic exciton is drastically suppressed upon a few % Cd doping. All these happen while the width of the exciton only gradually increases, and the antiferromagnetic ground state is robust. These results highlight the lattice uniformity's hidden importance as a prerequisite for coherent magnetic exciton. Finally, an exciting scenario emerges: the broken charge transfer forbids the otherwise uniform formation of the coherent magnetic exciton in (Ni,Cd)PS3.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Robust Machine Learning Inference from X-ray Absorption Near Edge Spectra through Featurization
Authors:
Yiming Chen,
Chi Chen,
Inhui Hwang,
Michael J. Davis,
Wanli Yang,
Chengjun Sun,
Gi-Hyeok Lee,
Dylan McReynolds,
Daniel Allen,
Juan Marulanda Arias,
Shyue Ping Ong,
Maria K. Y. Chan
Abstract:
X-ray absorption spectroscopy (XAS) is a commonly-employed technique for characterizing functional materials. In particular, x-ray absorption near edge spectra (XANES) encodes local coordination and electronic information and machine learning approaches to extract this information is of significant interest. To date, most ML approaches for XANES have primarily focused on using the raw spectral int…
▽ More
X-ray absorption spectroscopy (XAS) is a commonly-employed technique for characterizing functional materials. In particular, x-ray absorption near edge spectra (XANES) encodes local coordination and electronic information and machine learning approaches to extract this information is of significant interest. To date, most ML approaches for XANES have primarily focused on using the raw spectral intensities as input, overlooking the potential benefits of incorporating spectral transformations and dimensionality reduction techniques into ML predictions. In this work, we focused on systematically comparing the impact of different featurization methods on the performance of ML models for XAS analysis. We evaluated the classification and regression capabilities of these models on computed datasets and validated their performance on previously unseen experimental datasets. Our analysis revealed an intriguing discovery: the cumulative distribution function (CDF) feature achieves both high prediction accuracy and exceptional transferability. This remarkably robust performance can be attributed to its tolerance to horizontal shifts in spectra, which is crucial when validating models using experimental data. While this work exclusively focuses on XANES analysis, we anticipate that the methodology presented here will hold promise as a versatile asset to the broader spectroscopy community.
△ Less
Submitted 14 March, 2025; v1 submitted 10 October, 2023;
originally announced October 2023.
-
Superconducting Niobium Tip Electron Beam Source
Authors:
Cameron W. Johnson,
Andreas K. Schmid,
Marian Mankos,
Robin Röpke,
Nicole Kerker,
Ing-Shouh Hwang,
Ed K. Wong,
D. Frank Ogletree,
Andrew M. Minor,
Alexander Stibor
Abstract:
Modern electron microscopy and spectroscopy is a key technology for studying the structure and composition of quantum and biological materials in fundamental and applied sciences. High-resolution spectroscopic techniques and aberration-corrected microscopes are often limited by the relatively large energy distribution of currently available beam sources. This can be improved by a monochromator, wi…
▽ More
Modern electron microscopy and spectroscopy is a key technology for studying the structure and composition of quantum and biological materials in fundamental and applied sciences. High-resolution spectroscopic techniques and aberration-corrected microscopes are often limited by the relatively large energy distribution of currently available beam sources. This can be improved by a monochromator, with the significant drawback of losing most of the beam current. Here, we study the field emission properties of a monocrystalline niobium tip electron field emitter at 5.2 K, well below the superconducting transition temperature. The emitter fabrication process can generate two tip configurations, with or without a nano-protrusion at the apex, strongly influencing the field-emission energy distribution. The geometry without the nano-protrusion has a high beam current, long-term stability, and an energy width of around 100 meV. The beam current can be increased by two orders of magnitude by xenon gas adsorption. We also studied the emitter performance up to 82 K and demonstrated the beam's energy width can be below 40 meV even at liquid nitrogen cooling temperatures when an apex nano-protrusion is present. Furthermore, the spatial and temporal electron-electron correlations of the field emission are studied at normal and superconducting temperatures and the influence of Nottingham heating is discussed. This new monochromatic source will allow unprecedented accuracy and resolution in electron microscopy, spectroscopy, and high-coherence quantum applications.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Highly efficient nonvolatile magnetization switching and multi-level states by current in single van der Waals topological ferromagnet Fe3GeTe2
Authors:
Kaixuan Zhang,
Youjin Lee,
Matthew J. Coak,
Junghyun Kim,
Suhan Son,
Inho Hwang,
Dong-Su Ko,
Youngtek Oh,
Insu Jeon,
Dohun Kim,
Changgan Zeng,
Hyun-Woo Lee,
Je-Geun Park
Abstract:
Robust multi-level spin memory with the ability to write information electrically is a long-sought capability in spintronics, with great promise for applications. Here we achieve nonvolatile and highly energy-efficient magnetization switching in a single-material device formed of van-der-Waals topological ferromagnet Fe3GeTe2, whose magnetic information can be readily controlled by a tiny current.…
▽ More
Robust multi-level spin memory with the ability to write information electrically is a long-sought capability in spintronics, with great promise for applications. Here we achieve nonvolatile and highly energy-efficient magnetization switching in a single-material device formed of van-der-Waals topological ferromagnet Fe3GeTe2, whose magnetic information can be readily controlled by a tiny current. Furthermore, the switching current density and power dissipation are about 400 and 4000 times smaller than those of the existing spin-orbit-torque magnetic random access memory based on conventional magnet/heavy-metal systems. Most importantly, we also demonstrate multi-level states, switched by electrical current, which can dramatically enhance the information capacity density and reduce computing costs. Thus, our observations combine both high energy efficiency and large information capacity density in one device, showcasing the potential applications of the emerging field of van-der-Waals magnets in the field of spin memory and spintronics.
△ Less
Submitted 7 January, 2025; v1 submitted 30 August, 2021;
originally announced August 2021.
-
Gigantic current control of coercive field and magnetic memory based on nm-thin ferromagnetic van der Waals Fe3GeTe2
Authors:
Kaixuan Zhang,
Seungyun Han,
Youjin Lee,
Matthew J. Coak,
Junghyun Kim,
Inho Hwang,
Suhan Son,
Jeacheol Shin,
Mijin Lim,
Daegeun Jo,
Kyoo Kim,
Dohun Kim,
Hyun-Woo Lee,
Je-Geun Park
Abstract:
Controlling magnetic states by a small current is essential for the next-generation of energy-efficient spintronic devices. However, it invariably requires considerable energy to change a magnetic ground state of intrinsically quantum nature governed by fundamental Hamiltonian, once stabilized below a phase transition temperature. We report that surprisingly an in-plane current can tune the magnet…
▽ More
Controlling magnetic states by a small current is essential for the next-generation of energy-efficient spintronic devices. However, it invariably requires considerable energy to change a magnetic ground state of intrinsically quantum nature governed by fundamental Hamiltonian, once stabilized below a phase transition temperature. We report that surprisingly an in-plane current can tune the magnetic state of nm-thin van der Waals ferromagnet Fe3GeTe2 from a hard magnetic state to a soft magnetic state. It is the direct demonstration of the current-induced substantial reduction of the coercive field. This surprising finding is possible because the in-plane current produces a highly unusual type of gigantic spin-orbit torque for Fe3GeTe2. And we further demonstrate a working model of a new nonvolatile magnetic memory based on the principle of our discovery in Fe3GeTe2, controlled by a tiny current. Our findings open up a new window of exciting opportunities for magnetic van der Waals materials with potentially huge impacts on the future development of spintronic and magnetic memory.
△ Less
Submitted 7 January, 2025; v1 submitted 27 August, 2021;
originally announced August 2021.
-
Large diameter TiO$_2$ nanotubes enable integration of conformed hierarchical and blocking layers for enhanced dye-sensitized solar cell efficiency
Authors:
Abdelhamid Elzarka,
Ning Liu,
Imgon Hwang,
Mustafa Kamal,
Patrik Schmuki
Abstract:
In the present work we grow anodic TiO$_2$ nanotube layer with tube diameter ~ 500 nm and an open tube mouth. We use this morphology in dye-sensitized solar cells (DSSCs) and show that these tubes allow the construction of hybrid hierarchical photoanode structures of nanotubes with a defined and wall-conformance TiO2 nanoparticles decoration. At the same time, the large diameter allows the success…
▽ More
In the present work we grow anodic TiO$_2$ nanotube layer with tube diameter ~ 500 nm and an open tube mouth. We use this morphology in dye-sensitized solar cells (DSSCs) and show that these tubes allow the construction of hybrid hierarchical photoanode structures of nanotubes with a defined and wall-conformance TiO2 nanoparticles decoration. At the same time, the large diameter allows the successful establishment of an additional (insulating) blocking layer of SiO$_2$ or Al$_2$O$_3$. We show that this combination of hierarchical structure and blocking layer significantly enhances the solar cell efficiency by suppressing recombination reactions. In such a DSSC structure, the solar cell efficiency under back side illumination with AM1.5 illumination is enhanced from 5% neat tube to 7 %.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Highly Conducting Spaced TiO$_2$ Nanotubes Enable Defined Conformal Coating with Nanocrystalline Nb$_2$O$_5$ and High Performance Supercapacitor Applications
Authors:
Selda Ozkan,
Nhat Truong Nguyen,
Imgon Hwang,
Anca Mazare,
Patrik Schmuki
Abstract:
In this work, we report on the electrochemical behavior of nitrided spaced TiO$_2$ nanotubes conformally coated with a nanocrystalline Nb$_2$O$_5$ layer and find for these hierarchical structures an excellent supercapacitor performance. Highly aligned conductive 1D electrodes were obtained by a three step process: i) growth of self-organized nanotubes with defined and adjustable intertube spacing,…
▽ More
In this work, we report on the electrochemical behavior of nitrided spaced TiO$_2$ nanotubes conformally coated with a nanocrystalline Nb$_2$O$_5$ layer and find for these hierarchical structures an excellent supercapacitor performance. Highly aligned conductive 1D electrodes were obtained by a three step process: i) growth of self-organized nanotubes with defined and adjustable intertube spacing, ii) conformal Nb$_2$O$_5$ decoration in the tube interspace (while providing full electrolyte access to the entire active area), and iii) high temperature nitridation. Key is the growth of a nanotube array with regular tube-to-tube interspacing that enables an optimized decoration with secondary materials such as Nb$_2$O$_5$. We observe an increase in electrode capacitance from 158 $μ$F cm-2 for bare TiO$_2$ NTs, to 1536 $μ$F cm-2 for TiO$_2$/Nb$_2$O$_5$ NTs, to finally 37 mF cm-2 for Nb$_2$O$_5$ decorated and then nitrided nanotubes. This drastic increase can be ascribed firstly to the defined spacing established between the tube arrays that then allows for a conformal coating with a secondary active coating. Secondly, nitridation causes a drastic increase of the electron conductivity of the entire scaffold and thus reduces resistive losses.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Effect of Low Oxygen Annealing on Photoelectrochemical Water Splitting Properties of $α$-Fe$_2$O$_3$
Authors:
Yoichi Makimizu,
Nhat Truong Nguyen,
Hyo-Jin Ahn,
JeongEun Yoo,
Imgon Hwang,
Stepan Kment,
Patrik Schmuki
Abstract:
Photoelectrochemical (PEC) water splitting is a promising method for conversing solar energy into chemical energy stored in the form of hydrogen. Nanostructured hematite ($α$-Fe$_2$O$_3$) is one of the most attractive materials for highly efficient charge carrier generation and collection due to its large specific surface area and shortening minority carrier diffusion length required to reach the…
▽ More
Photoelectrochemical (PEC) water splitting is a promising method for conversing solar energy into chemical energy stored in the form of hydrogen. Nanostructured hematite ($α$-Fe$_2$O$_3$) is one of the most attractive materials for highly efficient charge carrier generation and collection due to its large specific surface area and shortening minority carrier diffusion length required to reach the surface. In the present work, PEC water splitting performance of $α$-Fe$_2$O$_3$ prepared by anodization of thin iron layers on an FTO glass and subsequent annealing in low O$_2$-Ar ambient with only 0.03% O$_2$ was investigated. The key finding is that annealing the anodic nanostructures with low oxygen concentration provides a strongly enhanced PEC performance compared with classic air annealing. The photocurrent of the former at 1.5 V vs. RHE results in 1.1 mA/cm2, being 11 times higher than that of the latter. The enhancement of the PEC performance for $α$-Fe$_2$O$_3$ annealed in low oxygen atmosphere can be attributed to controlled morphology, Sn doping, and introduction of oxygen vacancies, which contribute to the enhancement of the hole flux from the photogenerated site to the reactive surface and additionally lead to an enhanced hole transfer at the interface between the $α$-Fe$_2$O$_3$ and the electrolyte. From the obtained results, it is evident that low oxygen annealing is a surprisingly effective method of defect engineering and optimizing $α$-Fe$_2$O$_3$ electrodes for a maximized PEC water splitting performance.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Magneli phases doped with Pt for photocatalytic hydrogen evolution
Authors:
Ewa Wierzbicka,
Maximilian Domaschke,
Nikita Denisov,
Dominik Fehn,
Imgon Hwang,
Marlena Kaufmann,
Babette Kunstmann,
Jochen Schmidt,
Karsten Meyer,
Wolfgang Peukert,
Patrik Schmuki
Abstract:
Defined substoichiometric titanium oxides (Ti$_x$O$_{2x-1}$ with $3 < x < 10$) called Magneli phases have been investigated mostly for their unusual high conductivity and metal-like behavior. In photocatalysis, Magneli phase containing titania particles have been reported to provide favorable charge separation resulting in enhanced reaction efficiency. In the current work we describe a one-step sy…
▽ More
Defined substoichiometric titanium oxides (Ti$_x$O$_{2x-1}$ with $3 < x < 10$) called Magneli phases have been investigated mostly for their unusual high conductivity and metal-like behavior. In photocatalysis, Magneli phase containing titania particles have been reported to provide favorable charge separation resulting in enhanced reaction efficiency. In the current work we describe a one-step synthesis of Magneli-containing mixed phase nanoparticles that carry directly integrated minute amounts of Pt. Phase optimized nanoparticles that contain only a few hundred ppm Pt are very effective photocatalysts for H$_2$ evolution (they provide a 50-100 times higher H$_2$ evolution than plain anatase loaded with a similar amount of Pt). These photocatalysts are synthesized in a setup combining a hot-wall reactor that is used for TiOx synthesis with a spark generator producing Pt nanoparticles. Different reactor temperatures result in various phase ratios between anatase and Magneli phases. The titania nanoparticles (ca. 24 - 53 nm) were characterized using XRD, HRTEM, XPS and EPR spectra as well as ICP-OES analysis. The best photocatalyst prepared at 900$^\circ$C (which consists of mixed phase particles of 32% anatase, 11% rutile and 57% Magneli phases loaded with 290 ppm of Pt) can provide a photocatalytic H$_2$ evolution rate of ca. 5432 micromol h$^{-1} g$^{-1}$ for UV and ca. 1670 micromol h$^{-1} g$^{-1}$ for AM1.5 illumination. For powders converted to higher amounts of Magneli phases (1000$^\circ$C and 1100$^\circ$C), a drastic loss of the photocatalytic H$_2$ generation activity is observed. Thus, the high photocatalytic efficiency under best conditions is ascribed to an effective synergy between multi-junctions of Magneli titania and Pt that enable a much more effective charge separation and reaction than conventional Pt/anatase junctions.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Spaced TiO$_2$ Nanotube Arrays Allow for High Performance Hierarchical Supercapacitor Structure
Authors:
Nhat Truong Nguyen,
Selda Ozkan,
Imgon Hwang,
Xuemei Zhou,
Patrik Schmuki
Abstract:
In this work we describe the synthesis and electrochemical properties of nitridated hierarchical TiO$_2$ nanotubes as an electrode for supercapacitors. The hierarchical TiO$_2$ nanostructures are formed by a controlled layer-by-layer TiO2 nanoparticle decoration on self-organized spaced TiO$_2$ nanotubes. These structures are then annealed in NH$_3$ atmosphere at elevated temperature to convert th…
▽ More
In this work we describe the synthesis and electrochemical properties of nitridated hierarchical TiO$_2$ nanotubes as an electrode for supercapacitors. The hierarchical TiO$_2$ nanostructures are formed by a controlled layer-by-layer TiO2 nanoparticle decoration on self-organized spaced TiO$_2$ nanotubes. These structures are then annealed in NH$_3$ atmosphere at elevated temperature to convert the material to a nitride structure -- this drastically enhances their electron-transport properties. The areal capacitance of hierarchical structures can be tuned by changing the number of decorated TiO$_2$ nanoparticle layers. The capacitance enhancement of the hierarchical structures reaches a maximum when the surface area through nanoparticle deposition is highest and the conductivity via nitridation is optimized.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Injection Scheme with Deflecting Cavity for Ultimate Storage Ring
Authors:
J. Kim,
G. Jang,
M. Yoon,
B-H. Oh,
J. Lee,
J. Ko,
Y. Parc,
I. Hwang,
T. Ha,
D. Kim,
S. Kim,
S. Shin
Abstract:
We suggest a new on-axis injection scheme that uses two deflecting cavities to remove the tilt of the stored beam, and to kick the injected beam into the ring. In this new injection scheme, an injected beam with a certain angle is overlaid on the stored beam position in transverse phase space through the second deflecting cavity. (Note that the injected beam has separated phase with the stored bea…
▽ More
We suggest a new on-axis injection scheme that uses two deflecting cavities to remove the tilt of the stored beam, and to kick the injected beam into the ring. In this new injection scheme, an injected beam with a certain angle is overlaid on the stored beam position in transverse phase space through the second deflecting cavity. (Note that the injected beam has separated phase with the stored beam in longitudinal phase space). We present theoretical analysis and numerical simulations of the stored beam and injected beam with the new injection scheme.
△ Less
Submitted 24 July, 2018;
originally announced July 2018.
-
Three-dimensional surface topography of graphene by divergent beam electron diffraction
Authors:
Tatiana Latychevskaia,
Wei-Hao Hsu,
Wei-Tse Chang,
Chun-Yueh Lin,
Ing-Shouh Hwang
Abstract:
There is only a handful of scanning techniques that can provide surface topography at nanometre resolution. At the same time, there are no methods that are capable of non-invasive imaging of the three-dimensional surface topography of a thin free-standing crystalline material. Here we propose a new technique - the divergent beam electron diffraction (DBED) and show that it can directly image the i…
▽ More
There is only a handful of scanning techniques that can provide surface topography at nanometre resolution. At the same time, there are no methods that are capable of non-invasive imaging of the three-dimensional surface topography of a thin free-standing crystalline material. Here we propose a new technique - the divergent beam electron diffraction (DBED) and show that it can directly image the inhomogeneity in the atomic positions in a crystal. Such inhomogeneities are directly transformed into the intensity contrast in the first order diffraction spots of DBED patterns and the intensity contrast linearly depends on the wavelength of the employed probing electrons. Three-dimensional displacement of atoms as small as 1 angstrom can be detected when imaged with low-energy electrons (50 - 250 eV). The main advantage of DBED is that it allows visualisation of the three-dimensional surface topography and strain distribution at the nanometre scale in non-scanning mode, from a single shot diffraction experiment.
△ Less
Submitted 5 March, 2017;
originally announced March 2017.
-
Beam Emittance Measurement for PLS-II Linac
Authors:
Byung-Joon Lee,
Ilmoon Hwang,
Chong do Park,
SomJai Chunjarean,
Changbum Kim
Abstract:
The PLS-II has a 100 MeV pre-injector for the 3 GeV Linac. A thermionic gun produces electron charge of 200 pC with a bunch duration of 500 ps by a 250 ps triggering pulser. At the pre-injector, one of the most important beam parameters to identify the beam quality is a transverse emittance of electron bunches. Therefore we measure the beam emittance and twiss functions at 100 MeV in order to matc…
▽ More
The PLS-II has a 100 MeV pre-injector for the 3 GeV Linac. A thermionic gun produces electron charge of 200 pC with a bunch duration of 500 ps by a 250 ps triggering pulser. At the pre-injector, one of the most important beam parameters to identify the beam quality is a transverse emittance of electron bunches. Therefore we measure the beam emittance and twiss functions at 100 MeV in order to match the beam optics to beam transport line and go through it to the storage ring. To get the transverse emittance measurement, well-known technique, quadrupole scan, is used at the pre-injector. The emittance were 0.591 mm-mrad in horizontal and 0.774 mm-mrad in vertical direction.
△ Less
Submitted 15 June, 2016;
originally announced June 2016.
-
Proximity Scanning Transmission Electron Microscopy/Spectroscopy
Authors:
Ing-Shouh Hwang
Abstract:
Here a new microscopic method is proposed to image and characterize very thin samples like few-layer materials, organic molecules, and nanostructures with nanometer or sub-nanometer resolution using electron beams of energies lower than 20 eV. The microscopic technique achieves high resolution through the proximity (or near-field) effect, as in scanning tunneling microscopy (STM), while it also al…
▽ More
Here a new microscopic method is proposed to image and characterize very thin samples like few-layer materials, organic molecules, and nanostructures with nanometer or sub-nanometer resolution using electron beams of energies lower than 20 eV. The microscopic technique achieves high resolution through the proximity (or near-field) effect, as in scanning tunneling microscopy (STM), while it also allows detection of transmitted electrons for imaging and spectroscopy, as in scanning transmission electron microscopy (STEM). This proximity transmission electron microscopy (PSTEM) does not require any lens to focus the electron beam. It also allows detailed characterization of the interaction of low-energy electron with materials. PSTEM can operate in a way very similar to scanning tunneling microscopy, which provides high-resolution imaging of geometric and electronic structures of the sample surface. In addition, it allows imaging and characterization of the interior structures of the sample based on the detected transmission electron signals. PSTEM comprises a family of spectroscopies that address the transport and scattering of low-energy electrons in materials. Thus rich information can be extracted from the measurements. PSTEM offers a fundamentally new and powerful way to investigate thin materials. New analysis methods of thin materials and new physics may be uncovered by this method.
△ Less
Submitted 5 January, 2016;
originally announced January 2016.
-
Low-voltage coherent electron imaging based on a single-atom electron
Authors:
Wei-Tse Chang,
Chun-Yueh Lin,
Wei-Hao Hsu,
Mu-Tung Chang,
Yi-Sheng Chen,
En-Te Hwu,
Ing-Shouh Hwang
Abstract:
It has been a general trend to develop low-voltage electron microscopes due to their high imaging contrast of the sample and low radiation damage. Atom-resolved transmission electron microscopes with voltages as low as 15-40 kV have been demonstrated. However, achieving atomic resolution at voltages lower than 10 kV is extremely difficult. An alternative approach is coherent imaging or phase retri…
▽ More
It has been a general trend to develop low-voltage electron microscopes due to their high imaging contrast of the sample and low radiation damage. Atom-resolved transmission electron microscopes with voltages as low as 15-40 kV have been demonstrated. However, achieving atomic resolution at voltages lower than 10 kV is extremely difficult. An alternative approach is coherent imaging or phase retrieval imaging, which requires a sufficiently coherent source and an adequately small detection area on the sample as well as the detection of high-angle diffracted patterns with a sufficient resolution. In this work, we propose several transmission-type schemes to achieve coherent imaging of thin materials (less than 5 nm thick) with atomic resolution at voltages lower than 10 kV. Experimental schemes of both lens-less and lens-containing designs are presented and the advantages and challenges of these schemes are discussed. Preliminary results based on a highly coherent single-atom electron source are presented. The image plate is designed to be retractable to record the transmission patterns at different positions along the beam propagation direction. In addition, reflection-type coherent electron imaging schemes are also proposed as novel methods for characterizing surface atomic and electronic structures of materials.
△ Less
Submitted 28 December, 2015;
originally announced December 2015.
-
Correction of dephasing oscillations in matter wave interferometry
Authors:
Alexander Rembold,
Georg Schütz,
Wei-Tse Chang,
André Stefanov,
Andreas Pooch,
Ing-Shouh Hwang,
Andreas Günther,
Alexander Stibor
Abstract:
Vibrations, electromagnetic oscillations and temperature drifts are among the main reasons for dephasing in matter-wave interferometry. Sophisticated interferometry experiments, e.g. with ions or heavy molecules, often require integration times of several minutes due to the low source intensity or the high velocity selection. Here we present a scheme to suppress the influence of such dephasing mec…
▽ More
Vibrations, electromagnetic oscillations and temperature drifts are among the main reasons for dephasing in matter-wave interferometry. Sophisticated interferometry experiments, e.g. with ions or heavy molecules, often require integration times of several minutes due to the low source intensity or the high velocity selection. Here we present a scheme to suppress the influence of such dephasing mechanisms - especially in the low-frequency regime - by analyzing temporal and spatial particle correlations available in modern detectors. Such correlations can reveal interference properties that would otherwise be washed out due to dephasing by external oscillating signals. The method is shown experimentally in a biprism electron interferometer where a perturbing oscillation is artificially introduced by a periodically varying magnetic field. We provide a full theoretical description of the particle correlations where the perturbing frequency and amplitude can be revealed from the disturbed interferogram. The original spatial fringe pattern without the perturbation can thereby be restored. The technique can be applied to lower the general noise requirements in matter-wave interferometers. It allows for the optimization of electromagnetic shielding and decreases the efforts for vibrational or temperature stabilization.
△ Less
Submitted 3 April, 2014; v1 submitted 28 November, 2013;
originally announced November 2013.
-
Biprism Electron Interferometry with a Single Atom Tip Source
Authors:
Georg Schütz,
Alexander Rembold,
Andreas Pooch,
Simon Meier,
Philipp Schneeweiss,
Arno Rauschenbeutel,
Andreas Günther,
Wei-Tse Chang,
Ing-Shouh Hwang,
Alexander Stibor
Abstract:
Experiments with electron or ion matter waves require a coherent, monochromatic and long-term stable source with high brightness. These requirements are best fulfilled by single atom tip (SAT) field emitters. The performance of an iridium covered W(111) SAT is demonstrated and analyzed for electrons in a biprism interferometer. Furthermore we characterize the emission of the SAT in a separate fiel…
▽ More
Experiments with electron or ion matter waves require a coherent, monochromatic and long-term stable source with high brightness. These requirements are best fulfilled by single atom tip (SAT) field emitters. The performance of an iridium covered W(111) SAT is demonstrated and analyzed for electrons in a biprism interferometer. Furthermore we characterize the emission of the SAT in a separate field electron and field ion microscope and compare it with other emitter types. A new method is presented to fabricate the electrostatic charged biprism wire that separates and combines the matter wave. In contrast to other biprism interferometers the source and the biprism size are well defined within a few nanometers. The setup has direct applications in ion interferometry and Aharonov-Bohm physics.
△ Less
Submitted 28 November, 2013;
originally announced November 2013.
-
Optimization of coupling between photonic crystal resonator and curved microfiber
Authors:
In-Kag Hwang,
Guk-Hyun Kim,
Yong-Hee Lee
Abstract:
The evanescent coupling from a photonic crystal resonator to a micron-thick optical fiber is investigated in detail by using a 3D-FDTD method. Properly designed photonic crystal cavity and taper structures are proposed, and optimal operating conditions are found to enhance the coupling strength while suppressing other cavity losses including the coupling to the slab propagating mode and to the h…
▽ More
The evanescent coupling from a photonic crystal resonator to a micron-thick optical fiber is investigated in detail by using a 3D-FDTD method. Properly designed photonic crystal cavity and taper structures are proposed, and optimal operating conditions are found to enhance the coupling strength while suppressing other cavity losses including the coupling to the slab propagating mode and to the higher-order fiber mode. In simulation, the coupling into the fundamental fiber mode is discriminated from other cavity losses by spatial and parity filtering of the FDTD results. The coupling efficiency of more than 80% into the fundamental fiber mode together with a total Q factor of 5,200 is achieved for the fiber diameter of 1.0 um and the air gap of 200 nm between the fiber and the cavity.
△ Less
Submitted 12 August, 2005;
originally announced August 2005.
