-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Mass-difference measurements on heavy nuclides with at an eV/c2 accuracy level with PENTATRAP
Authors:
A. Rischka,
H. Cakir,
M. Door,
P. Filianin,
Z. Harman,
W. J. Huang,
P. Indelicato,
C. H. Keitel,
C. M. Koenig,
K. Kromer,
M. Mueller,
Y. N. Novikov,
R. X. Schuessler,
Ch. Schweiger,
S. Eliseev,
K. Blaum
Abstract:
First ever measurements of the ratios of free cyclotron frequencies of heavy highly charged ions with Z>50 with relative uncertainties close to 1e-11 are presented. Such accurate measurements have become realistic due to the construction of the novel cryogenic multi-Penning-trap mass spectrometer PENTATRAP. Based on the measured frequency ratios, the mass differences of five pairs of stable xenon…
▽ More
First ever measurements of the ratios of free cyclotron frequencies of heavy highly charged ions with Z>50 with relative uncertainties close to 1e-11 are presented. Such accurate measurements have become realistic due to the construction of the novel cryogenic multi-Penning-trap mass spectrometer PENTATRAP. Based on the measured frequency ratios, the mass differences of five pairs of stable xenon isotopes, ranging from 126Xe to 134Xe, have been determined. Moreover, the first direct measurement of an electron binding energy in a heavy highly charged ion, namely of the 37th atomic electron in xenon, with an uncertainty of a few eV is demonstrated. The obtained value agrees with the calculated one using two independent different implementations of the multiconfiguration Dirac-Hartree-Fock method. PENTATRAP opens the door to future measurements of electron binding energies in highly charged heavy ions for more stringent tests of bound-state quantum electrodynamics in strong electromagnetic fields and for an investigation of the manifestation of Light Dark Matter in isotopic chains of certain chemical elements.
△ Less
Submitted 17 March, 2022;
originally announced March 2022.
-
Detection of metastable electronic states by Penning trap mass spectrometry
Authors:
Rima Xenia Schüssler,
Hendrik Bekker,
Martin Braß,
Halil Cakir,
José R. Crespo López-Urrutia,
Menno Door,
Pavel Filianin,
Zoltan Harman,
Maurits W. Haverkort,
Wen Jia Huang,
Paul Indelicato,
Christoph Helmut Keitel,
Charlotte Maria König,
Kathrin Kromer,
Marius Müller,
Yuri N. Novikov,
Alexander Rischka,
Christoph Schweiger,
Sven Sturm,
Stefan Ulmer,
Ssergey Eliseev,
Klaus Blaum
Abstract:
State-of-the-art optical clocks achieve fractional precisions of $10^{-18}$ and below using ensembles of atoms in optical lattices or individual ions in radio-frequency traps. Promising candidates for novel clocks are highly charged ions (HCIs) and nuclear transitions, which are largely insensitive to external perturbations and reach wavelengths beyond the optical range, now becoming accessible to…
▽ More
State-of-the-art optical clocks achieve fractional precisions of $10^{-18}$ and below using ensembles of atoms in optical lattices or individual ions in radio-frequency traps. Promising candidates for novel clocks are highly charged ions (HCIs) and nuclear transitions, which are largely insensitive to external perturbations and reach wavelengths beyond the optical range, now becoming accessible to frequency combs. However, insufficiently accurate atomic structure calculations still hinder the identification of suitable transitions in HCIs. Here, we report on the discovery of a long-lived metastable electronic state in a HCI by measuring the mass difference of the ground and the excited state in Re, the first non-destructive, direct determination of an electronic excitation energy. This result agrees with our advanced calculations, and we confirmed them with an Os ion with the same electronic configuration. We used the high-precision Penning-trap mass spectrometer PENTATRAP, unique in its synchronous use of five individual traps for simultaneous mass measurements. The cyclotron frequency ratio $R$ of the ion in the ground state to the metastable state could be determined to a precision of $δR=1\cdot 10^{-11}$, unprecedented in the heavy atom regime. With a lifetime of about 130 days, the potential soft x-ray frequency reference at $ν=4.86\cdot 10^{16}\,\text{Hz}$ has a linewidth of only $Δν\approx 5\cdot 10^{-8}\,\text{Hz}$, and one of the highest electronic quality factor ($Q=\fracν{Δν}\approx 10^{24}$) ever seen in an experiment. Our low uncertainty enables searching for more HCI soft x-ray clock transitions, needed for promising precision studies of fundamental physics in a thus far unexplored frontier.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Experimental Investigation of the Transition Energy $γ_t$ in the Isochronous Mode of the HIRFL-CSRe
Authors:
W. W. Ge,
Y. J. Yuan,
J. C. Yang,
R. J. Chen,
X. L. Yan,
H. Du,
Z. S. Li,
J. Yang,
D. Y. Yin,
L. J. Mao,
X. N. Li,
W. H. Zheng,
G. D. Shen,
B. Wu,
S. Ruan,
G. Wang,
H. Zhao,
M. Wang,
M. Z. Sun,
Y. M. Xing,
P. Zhang,
C. Y. Fu,
P. Shuai,
X. Xu,
Y. H. Zhang
, et al. (9 additional authors not shown)
Abstract:
The Isochronous Mass Spectrometry (IMS) based on storage rings is a powerful technique for mass measurement of short-lived exotic nuclei. The transition energy $γ_t$ of the storage ring is a vital parameter of the IMS technique. It is difficult to measure the $γ_t$ and its relation to momentum spread or circulating length, especially to monitor the variation of $γ_t$ during experiments. An experim…
▽ More
The Isochronous Mass Spectrometry (IMS) based on storage rings is a powerful technique for mass measurement of short-lived exotic nuclei. The transition energy $γ_t$ of the storage ring is a vital parameter of the IMS technique. It is difficult to measure the $γ_t$ and its relation to momentum spread or circulating length, especially to monitor the variation of $γ_t$ during experiments. An experimental investigation on the $γ_t$ has been performed for the IMS experiment at the Cooler Storage Ring of the Heavy Ion Research Facility in Lanzhou (HIRFL-CSRe). With the velocity measured by two time-of-flight (TOF) detectors, the $γ_t$ as a function of orbital length can be determined. The influences of higher order magnetic field components on the $γ_t$ function were inferred for isochronous correction. This paper introduces and investigates the influence of dipole magnetic fields, quadrupole magnetic fields and sextupole magnetic fields on the $γ_t$ function. With the quadrupole magnets and sextupole magnets corrections, a mass resolution of 171332 (FWHM) and $σ(T)/T=1.34\times10^{-6}$ were reached, which shall be compared with 31319 (FWHM) and $σ(T)/T=7.35\times10^{-6}$ obtained without correction.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
A method to measure the transition energy $γ_{t}$ of the isochronously tuned storage ring
Authors:
R. J. Chen,
X. L. Yan,
W. W. Ge,
Y. J. Yuan,
M. Wang,
M. Z. Sun,
Y. M. Xing,
P. Zhang,
C. Y. Fu,
P. Shuai,
X. Xu,
Y. H. Zhang,
T. Bao,
X. C. Chen,
X. J. Hu,
W. J. Huang,
H. F. Li,
J. H. Liu,
Yu. A. Litvinov,
S. A. Litvinov,
L. J. Mao,
B. Wu,
H. S. Xu,
J. C. Yang,
D. Y. Yin
, et al. (5 additional authors not shown)
Abstract:
The Isochronous Mass Spectrometry (IMS) is a powerful technique developed in heavy-ion storage rings for measuring masses of very short-lived exotic nuclei. The IMS is based on the isochronous setting of the ring. One of the main parameters of this setting is the transition energy $γ_{t}$. %The transition energy $γ_{t}$ plays an important role in the isochronous mass spectrometry (IMS). It has bee…
▽ More
The Isochronous Mass Spectrometry (IMS) is a powerful technique developed in heavy-ion storage rings for measuring masses of very short-lived exotic nuclei. The IMS is based on the isochronous setting of the ring. One of the main parameters of this setting is the transition energy $γ_{t}$. %The transition energy $γ_{t}$ plays an important role in the isochronous mass spectrometry (IMS). It has been a challenge to determine the $γ_{t}$ and especially to monitor the variation of $γ_{t}$ during experiments. In this paper we introduce a method to measure the $γ_{t}$ online during IMS experiments by using the acquired experimental data. Furthermore, since the storage ring has (in our context) a relatively large momentum acceptance, the variation of the $γ_{t}$ across the ring acceptance is a source of systematic uncertainty of measured masses. With the installation of two time-of-flight (TOF) detectors, the velocity of each stored ion and its revolution time are simultaneously available for the analysis. These quantities enabled us to determine the $γ_{t}$ as a function of orbital length in the ring. The presented method is especially important for future IMS experiments planned at the new-generation storage ring facilities FAIR in Germany and HIAF in China.
△ Less
Submitted 22 November, 2018;
originally announced November 2018.
-
Stress Tensor Eigenvector Following with Next-Generation Quantum Theory of Atoms in Molecules
Authors:
Jia Hui Li,
Wei Jie Huang,
Tianlv Xu,
Steven R. Kirk,
Samantha Jenkins
Abstract:
The eigenvectors of the electronic stress tensor have been identified as useful for the prediction of chemical reactivity because they determine the most preferred directions to move the bonds that correspond to a qualitative change in the molecular electronic structure. A new 3-D vector based interpretation of the chemical bond that we refer to as the bond-path framework set…
▽ More
The eigenvectors of the electronic stress tensor have been identified as useful for the prediction of chemical reactivity because they determine the most preferred directions to move the bonds that correspond to a qualitative change in the molecular electronic structure. A new 3-D vector based interpretation of the chemical bond that we refer to as the bond-path framework set $\mathbb{B} = \{p,q,r\}$ provides a version of the quantum theory of atoms in molecules (QTAIM) beyond the minimum definition for bonding that is particularly suitable for understanding changes in molecular electronic structure that occur during reactions. The bond-path framework set $\mathbb{B}$ is straightforwardly constructed and visualized from the eigenvalues and eigenvectors of QTAIM. This approach is applied to the structural deformations of ethene that occur during applied torsion $θ$, -180.0° $\leq$ $θ$ $\leq$ +180.0°. The corresponding stress tensor version is readily constructed as $\mathbb{B}_σ = \{p_σ,q_σ,r\}$ within the QTAIM partitioning making it possible to compare experimentally and computationally determined electronic charge densities. The bond-path framework set $\mathbb{B}$ or $\mathbb{B}_σ$ are the networks that comprise three strands: the least preferred ($p, p_σ$), most preferred ($q, q_σ$) and $r$ is the familiar QTAIM bond-path. We demonstrate that the most preferred direction for bond motion using the stress tensor corresponds to the most compressible direction and not to the least compressible direction as previously reported. We show the necessity for a directional approach constructed using the eigenvectors along the entire bond length and demonstrate the insufficiency of the sole use of scalar measures for capturing the nature of the stress tensor within the QTAIM partitioning.
△ Less
Submitted 16 September, 2018;
originally announced September 2018.
-
A Vector-Based Representation of the Chemical Bond for the Normal Modes of Benzene
Authors:
Wei Jie Huang,
Alireza Azizi,
Tianlv Xu,
Steven R. Kirk,
Samantha Jenkins
Abstract:
We introduce a vector-based interpretation of the chemical bond within the quantum theory of atoms in molecules (QTAIM), the bond-path framework set $\mathbb{B} = \{p, q, r\}$, to follow variations in the 3-D morphology of all bonds for the four infra-red (IR) active normal modes of benzene. The bond-path framework set comprises three unique paths $p$, $q$ and $r$ where $r$ is the familiar QTAIM b…
▽ More
We introduce a vector-based interpretation of the chemical bond within the quantum theory of atoms in molecules (QTAIM), the bond-path framework set $\mathbb{B} = \{p, q, r\}$, to follow variations in the 3-D morphology of all bonds for the four infra-red (IR) active normal modes of benzene. The bond-path framework set comprises three unique paths $p$, $q$ and $r$ where $r$ is the familiar QTAIM bond concept of bond-path ($r$) while the two new paths $p$ and $q$ are formulated from the least and most preferred directions of electron density accumulation respectively. We find 3-D distortions including bond stretching/compression, torsion and curving. We introduce two fractional measures to quantify these variations away from linearity of the bond.
△ Less
Submitted 7 May, 2018; v1 submitted 3 April, 2018;
originally announced April 2018.
-
Next-Generation Quantum Theory of Atoms in Molecules for the Ground and Excited States of Fulvene
Authors:
Wei Jie Huang,
Roya Momen,
Alireza Azizi,
Tianlv Xu,
Steven R. Kirk,
Michael Filatov,
Samantha Jenkins
Abstract:
A vector-based representation of the chemical bond is introduced that we refer to as the bond-path frame-work set = $\mathbb{B} = \{p, q, r\}$, where $p$, $q$ and $r$ represent three paths with corresponding eigenvector-following path lengths $\mathbb{H}^{*},\mathbb{H}$ and the familiar quantum theory of atoms in molecules (QTAIM) bond-path length. The eigenvector-following path lengths…
▽ More
A vector-based representation of the chemical bond is introduced that we refer to as the bond-path frame-work set = $\mathbb{B} = \{p, q, r\}$, where $p$, $q$ and $r$ represent three paths with corresponding eigenvector-following path lengths $\mathbb{H}^{*},\mathbb{H}$ and the familiar quantum theory of atoms in molecules (QTAIM) bond-path length. The eigenvector-following path lengths $\mathbb{H}^{*}$ and $\mathbb{H}$ are constructed along the bond-path from the $\underline{\mathbf{\mathit{e}}}_{1}$ and $\underline{\mathbf{\mathit{e}}}_{2}$ Hessian eigenvectors respectively, which correspond to the least and most preferred directions of charge density accumulation. In particular, the paths $p$ and $q$ provide a vector representation of the scalar QTAIM ellipticity ε. The bond-path frame-work set $\mathbb{B}$ is applied to the excited state deactivation of fulvene that involves distortions along various intramolecular degrees of freedom, such as the bond stretching/compression of bond length alternation (BLA) and bond torsion distortions. We find that the $\mathbb{H}^{*}$ and $\mathbb{H}$ lengths can differentiate between the ground and excited electronic states, in contrast to the QTAIM bond-path length. In particular, the eigenvector-following path lengths $\mathbb{H}^{*}$ and $\mathbb{H}$ are found to be shorter for the excited state than the ground state for both the BLA and bond torsion distortions indicating that distortions resulting in lower $\mathbb{H}^{*}$ and $\mathbb{H}$ values are easier to perform.
△ Less
Submitted 6 May, 2018; v1 submitted 2 April, 2018;
originally announced April 2018.
-
An improvement of isochronous mass spectrometry: Velocity measurements using two time-of-flight detectors
Authors:
P. Shuai,
X. Xu,
Y. H. Zhang,
H. S. Xu,
Yu. A. Litvinov,
M. Wang,
X. L. Tu,
K. Blaum,
X. H. Zhou,
Y. J. Yuan,
X. L. Yan,
X. C. Chen,
R. J. Chen,
C. Y. Fu,
Z. Ge,
W. J. Huang,
Y. M. Xing,
Q. Zeng
Abstract:
Isochronous mass spectrometry (IMS) in storage rings is a powerful tool for mass measurements of exotic nuclei with very short half-lives down to several tens of microseconds, using a multicomponent secondary beam separated in-flight without cooling. However, the inevitable momentum spread of secondary ions limits the precision of nuclear masses determined by using IMS. Therefore, the momentum mea…
▽ More
Isochronous mass spectrometry (IMS) in storage rings is a powerful tool for mass measurements of exotic nuclei with very short half-lives down to several tens of microseconds, using a multicomponent secondary beam separated in-flight without cooling. However, the inevitable momentum spread of secondary ions limits the precision of nuclear masses determined by using IMS. Therefore, the momentum measurement in addition to the revolution period of stored ions is crucial to reduce the influence of the momentum spread on the standard deviation of the revolution period, which would lead to a much improved mass resolving power of IMS. One of the proposals to upgrade IMS is that the velocity of secondary ions could be directly measured by using two time-of-flight (double TOF) detectors installed in a straight section of a storage ring. In this paper, we outline the principle of IMS with double TOF detectors and the method to correct the momentum spread of stored ions.
△ Less
Submitted 1 March, 2016; v1 submitted 25 January, 2016;
originally announced January 2016.
