-
Design and experimental demonstration of optomechanical paddle nanocavities
Authors:
Chris Healey,
Hamidreza Kaviani,
Marcelo Wu,
Behzad Khanaliloo,
Matthew Mitchell,
Aaron C. Hryciw,
Paul E. Barclay
Abstract:
We present the design, fabrication and initial characterization of a paddle nanocavity consisting of a suspended sub-picogram nanomechanical resonator optomechanically coupled to a photonic crystal nanocavity. The optical and mechanical properties of the paddle nanocavity can be systematically designed and optimized, and key characteristics including mechanical frequency easily tailored. Measureme…
▽ More
We present the design, fabrication and initial characterization of a paddle nanocavity consisting of a suspended sub-picogram nanomechanical resonator optomechanically coupled to a photonic crystal nanocavity. The optical and mechanical properties of the paddle nanocavity can be systematically designed and optimized, and key characteristics including mechanical frequency easily tailored. Measurements under ambient conditions of a silicon paddle nanocavity demonstrate an optical mode with quality factor $Q_o$ ~ 6000 near 1550 nm, and optomechanical coupling to several mechanical resonances with frequencies $ω_m/2π$ ~ 12-64 MHz, effective masses $m_\text{eff}$ ~ 350-650 fg, and mechanical quality factors $Q_m$ ~ 44-327. Paddle nanocavities are promising for optomechanical sensing and nonlinear optomechanics experiments.
△ Less
Submitted 1 September, 2015;
originally announced September 2015.
-
Single crystal diamond nanobeam waveguide optomechanics
Authors:
Behzad Khanaliloo,
Harishankar Jayakumar,
Aaron C. Hryciw,
David P. Lake,
Hamidreza Kaviani,
Paul E. Barclay
Abstract:
Optomechanical devices sensitively transduce and actuate motion of nanomechanical structures using light. Single--crystal diamond promises to improve the performance of optomechanical devices, while also providing opportunities to interface nanomechanics with diamond color center spins and related quantum technologies. Here we demonstrate dissipative waveguide--optomechanical coupling exceeding 35…
▽ More
Optomechanical devices sensitively transduce and actuate motion of nanomechanical structures using light. Single--crystal diamond promises to improve the performance of optomechanical devices, while also providing opportunities to interface nanomechanics with diamond color center spins and related quantum technologies. Here we demonstrate dissipative waveguide--optomechanical coupling exceeding 35 GHz/nm to diamond nanobeams supporting both optical waveguide modes and mechanical resonances, and use this optomechanical coupling to measure nanobeam displacement with a sensitivity of $9.5$ fm/$\sqrt{\text{Hz}}$ and optical bandwidth $>150$nm. The nanobeams are fabricated from bulk optical grade single--crystal diamond using a scalable undercut etching process, and support mechanical resonances with quality factor $2.5 \times 10^5$ at room temperature, and $7.2 \times 10^5$ in cryogenic conditions (5K). Mechanical self--oscillations, resulting from interplay between photothermal and optomechanical effects, are observed with amplitude exceeding 200 nm for sub-$μ$W absorbed optical power, demonstrating the potential for optomechanical excitation and manipulation of diamond nanomechanical structures.
△ Less
Submitted 28 April, 2015; v1 submitted 5 February, 2015;
originally announced February 2015.
-
Near-field tuning of optomechanical coupling in a split-beam nanocavity
Authors:
Aaron C. Hryciw,
Marcelo Wu,
Behzad Khanaliloo,
Paul E. Barclay
Abstract:
Tunable evanescent coupling is used to modify the optomechanical interactions within a split-beam photonic crystal nanocavity. An optical fiber taper probe is used to renormalize the optical nanocavity field and introduce a dissipative optomechanical coupling channel, reconfiguring and enhancing coupling between the optical and mechanical resonances of the device. Positioning of the fiber taper al…
▽ More
Tunable evanescent coupling is used to modify the optomechanical interactions within a split-beam photonic crystal nanocavity. An optical fiber taper probe is used to renormalize the optical nanocavity field and introduce a dissipative optomechanical coupling channel, reconfiguring and enhancing coupling between the optical and mechanical resonances of the device. Positioning of the fiber taper allows preferential coupling to specific mechanical modes and provides a mechanism for tuning the optomechanical interaction between dissipative and dispersive coupling regimes.
△ Less
Submitted 1 July, 2014;
originally announced July 2014.
-
Dissipative and Dispersive Optomechanics in a Nanocavity Torque Sensor
Authors:
Marcelo Wu,
Aaron C. Hryciw,
Chris Healey,
David P. Lake,
Harishankar Jayakumar,
Mark R. Freeman,
John P. Davis,
Paul E. Barclay
Abstract:
Dissipative and dispersive optomechanical couplings are experimentally observed in a photonic crystal split-beam nanocavity optimized for detecting nanoscale sources of torque. Dissipative coupling of up to approximately $500$ MHz/nm and dispersive coupling of $2$ GHz/nm enable measurements of sub-pg torsional and cantilever-like mechanical resonances with a thermally-limited torque detection sens…
▽ More
Dissipative and dispersive optomechanical couplings are experimentally observed in a photonic crystal split-beam nanocavity optimized for detecting nanoscale sources of torque. Dissipative coupling of up to approximately $500$ MHz/nm and dispersive coupling of $2$ GHz/nm enable measurements of sub-pg torsional and cantilever-like mechanical resonances with a thermally-limited torque detection sensitivity of 1.2$\times 10^{-20} \text{N} \, \text{m}/\sqrt{\text{Hz}}$ in ambient conditions and 1.3$\times 10^{-21} \text{N} \, \text{m}/\sqrt{\text{Hz}}$ in low vacuum. Interference between optomechanical coupling mechanisms is observed to enhance detection sensitivity and generate a mechanical-mode-dependent optomechanical wavelength response.
△ Less
Submitted 5 September, 2014; v1 submitted 25 March, 2014;
originally announced March 2014.
-
Cavity optomechanics in gallium phosphide microdisks
Authors:
Matthew Mitchell,
Aaron C. Hryciw,
Paul E. Barclay
Abstract:
We demonstrate gallium phosphide (GaP) microdisk optical cavities with intrinsic quality factors $ > 2.8\times10^{5}$ and mode volumes $< 10 (λ/n)^3$, and study their nonlinear and optomechanical properties. For optical intensities up to $8.0\times10^4$ intracavity photons, we observe optical loss in the microcavity to decrease with increasing intensity, indicating that saturable absorption sites…
▽ More
We demonstrate gallium phosphide (GaP) microdisk optical cavities with intrinsic quality factors $ > 2.8\times10^{5}$ and mode volumes $< 10 (λ/n)^3$, and study their nonlinear and optomechanical properties. For optical intensities up to $8.0\times10^4$ intracavity photons, we observe optical loss in the microcavity to decrease with increasing intensity, indicating that saturable absorption sites are present in the GaP material, and that two-photon absorption is not significant. We observe optomechanical coupling between optical modes of the microdisk around 1.5 $μ$m and several mechanical resonances, and measure an optical spring effect consistent with a theoretically predicted optomechanical coupling rate $g_0/2π\sim 30$ kHz for the fundamental mechanical radial breathing mode at 488 MHz.
△ Less
Submitted 29 May, 2014; v1 submitted 24 September, 2013;
originally announced September 2013.
-
Optical design of split-beam photonic crystal nanocavities
Authors:
Aaron C. Hryciw,
Paul E. Barclay
Abstract:
We design high quality factor photonic crystal nanobeam cavities formed by two mechanically isolated cantilevers. These "split-beam" cavities have a physical gap at the center, allowing mechanical excitations of one or both of the cavity halves. They are designed by analyzing the optical band structures and mode profiles of waveguides perforated by elliptical holes and rectangular gaps, and are pr…
▽ More
We design high quality factor photonic crystal nanobeam cavities formed by two mechanically isolated cantilevers. These "split-beam" cavities have a physical gap at the center, allowing mechanical excitations of one or both of the cavity halves. They are designed by analyzing the optical band structures and mode profiles of waveguides perforated by elliptical holes and rectangular gaps, and are predicted to support optical resonances with quality factors exceeding 1E6 at wavelengths of ~ 1.6 um.
△ Less
Submitted 17 April, 2013; v1 submitted 2 January, 2013;
originally announced January 2013.
-
Solving dielectric and plasmonic waveguide dispersion relations with a pocket calculator
Authors:
Rohan D. Kekatpure,
Aaron C. Hryciw,
Edward S. Barnard,
Mark L. Brongersma
Abstract:
We present a robust iterative technique for solving complex transcendental dispersion equations routinely encountered in integrated optics. Our method especially befits the multilayer dielectric and plasmonic waveguides forming the basis structures for a host of contemporary nanophotonic devices. The solution algorithm ports seamlessly from the real to the complex domain--i.e., no extra complexi…
▽ More
We present a robust iterative technique for solving complex transcendental dispersion equations routinely encountered in integrated optics. Our method especially befits the multilayer dielectric and plasmonic waveguides forming the basis structures for a host of contemporary nanophotonic devices. The solution algorithm ports seamlessly from the real to the complex domain--i.e., no extra complexity results when dealing with leaky structures or those with material/metal loss. Unlike several existing numerical approaches, our algorithm exhibits markedly-reduced sensitivity to the initial guess and allows for straightforward implementation on a pocket calculator.
△ Less
Submitted 14 October, 2009; v1 submitted 27 September, 2009;
originally announced September 2009.
