-
Thermoelectric magnetohydrodynamic flow in a liquid metal-infused trench
Authors:
Oliver George Bond,
Peter Denis Howell
Abstract:
We derive a mathematical model for steady, unidirectional, thermoelectric magnetohydrodynamic (TEMHD) flow of liquid lithium along a solid metal trench, subject to an imposed heat flux. We use a finite-element method implemented in COMSOL Multiphysics to solve the problem numerically, demonstrating how the fluid velocity, induced magnetic field and temperature change depending on the key physical…
▽ More
We derive a mathematical model for steady, unidirectional, thermoelectric magnetohydrodynamic (TEMHD) flow of liquid lithium along a solid metal trench, subject to an imposed heat flux. We use a finite-element method implemented in COMSOL Multiphysics to solve the problem numerically, demonstrating how the fluid velocity, induced magnetic field and temperature change depending on the key physical and geometrical parameters. The observed flow structures are elucidated by using the method of matched asymptotic expansions to obtain approximate solutions in the limit where the Hartmann number is large and the trench walls are thin.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Two-dimensional Rayleigh-Bénard convection without boundaries
Authors:
Philip Winchester,
Vassilios Dallas,
Peter D. Howell
Abstract:
We study the effects of Prandtl number $Pr$ and Rayleigh number $Ra$ in two-dimensional Rayleigh-Bénard convection without boundaries, i.e. with periodic boundary conditions. In the limits of $Pr \to 0$ and $\infty$, we find that the dynamics are dominated by vertically oriented elevator modes that grow without bound, even at high Rayleigh numbers and with large scale dissipation. For finite Prand…
▽ More
We study the effects of Prandtl number $Pr$ and Rayleigh number $Ra$ in two-dimensional Rayleigh-Bénard convection without boundaries, i.e. with periodic boundary conditions. In the limits of $Pr \to 0$ and $\infty$, we find that the dynamics are dominated by vertically oriented elevator modes that grow without bound, even at high Rayleigh numbers and with large scale dissipation. For finite Prandtl number in the range $10^{-3} \leq Pr \leq 10^2$, the Nusselt number tends to follow the `ultimate' scaling $Nu \propto Pr^{1/2} Ra^{1/2}$, and the viscous dissipation scales as $ε_ν\propto Pr^{1/2} Ra^{-1/4}$. The latter scaling is based on the observation that enstrophy $\langle ω^2 \rangle \propto Pr^0 Ra^{1/4}$. The inverse cascade of kinetic energy forms the power-law spectrum $\hat E_u(k) \propto k^{-2.3}$, while the direct cascade of potential energy forms the power-law spectrum $\hat E_θ(k) \propto k^{-1.2}$, with the exponents and the turbulent convective dynamics in the inertial range found to be independent of Prandtl number. Finally, the kinetic and potential energy fluxes are not constant in the inertial range, invalidating one of the assumptions underlying Bolgiano-Obukhov phenomenology.
△ Less
Submitted 25 December, 2023; v1 submitted 27 October, 2023;
originally announced October 2023.
-
The onset of zonal modes in two-dimensional Rayleigh-Bénard convection
Authors:
Philip Winchester,
Peter D. Howell,
Vassilios Dallas
Abstract:
We study the stability of steady convection rolls in 2D Rayleigh--Bénard convection with free-slip boundaries and horizontal periodicity over twelve orders of magnitude in the Prandtl number $(10^{-6} \leq Pr \leq 10^6)$ and five orders of magnitude in the Rayleigh number $(8π^4 < Ra \leq 3 \times 10^7)$. The analysis is facilitated by partitioning our modal expansion into so-called even and odd m…
▽ More
We study the stability of steady convection rolls in 2D Rayleigh--Bénard convection with free-slip boundaries and horizontal periodicity over twelve orders of magnitude in the Prandtl number $(10^{-6} \leq Pr \leq 10^6)$ and five orders of magnitude in the Rayleigh number $(8π^4 < Ra \leq 3 \times 10^7)$. The analysis is facilitated by partitioning our modal expansion into so-called even and odd modes. With aspect ratio $Γ= 2$, we observe that zonal modes (with horizontal wavenumber equal to zero) can emerge only once the steady convection roll state consisting of even modes only becomes unstable to odd perturbations. We determine the stability boundary in the $(Pr,Ra)$-plane and observe remarkably intricate features corresponding to qualitative changes in the solution, as well as three regions where the steady convection rolls lose and subsequently regain stability as the Rayleigh number is increased. We study the asymptotic limit $\Pr \to 0$ and find that the steady convection rolls become unstable almost instantaneously, eventually leading to non-linear relaxation osculations and bursts, which we can explain with a weakly non-linear analysis. In the complementary large-$\Pr$ limit, we observe that the stability boundary reaches an asymptotic value $Ra = 2.54 \times 10^7$ and that the zonal modes at the instability switch off abruptly at a large, but finite, Prandtl number.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Zonal flow reversals in two-dimensional Rayleigh-Bénard convection
Authors:
Philip Winchester,
Vassilios Dallas,
Peter D. Howell
Abstract:
We analyse the nonlinear dynamics of the large scale flow in Rayleigh-Bénard convection in a two-dimensional, rectangular geometry of aspect ratio $Γ$. We impose periodic and free-slip boundary conditions in the streamwise and spanwise directions, respectively. As Rayleigh number Ra increases, a large scale zonal flow dominates the dynamics of a moderate Prandtl number fluid. At high Ra, in the tu…
▽ More
We analyse the nonlinear dynamics of the large scale flow in Rayleigh-Bénard convection in a two-dimensional, rectangular geometry of aspect ratio $Γ$. We impose periodic and free-slip boundary conditions in the streamwise and spanwise directions, respectively. As Rayleigh number Ra increases, a large scale zonal flow dominates the dynamics of a moderate Prandtl number fluid. At high Ra, in the turbulent regime, transitions are seen in the probability density function (PDF) of the largest scale mode. For $Γ= 2$, the PDF first transitions from a Gaussian to a trimodal behaviour, signifying the emergence of reversals of the zonal flow where the flow fluctuates between three distinct turbulent states: two states in which the zonal flow travels in opposite directions and one state with no zonal mean flow. Further increase in Ra leads to a transition from a trimodal to a unimodal PDF which demonstrates the disappearance of the zonal flow reversals. On the other hand, for $Γ= 1$ the zonal flow reversals are characterised by a bimodal PDF of the largest scale mode, where the flow fluctuates only between two distinct turbulent states with zonal flow travelling in opposite directions.
△ Less
Submitted 29 October, 2020;
originally announced October 2020.
-
Overview of recent physics results from MAST
Authors:
A Kirk,
J Adamek,
RJ Akers,
S Allan,
L Appel,
F Arese Lucini,
M Barnes,
T Barrett,
N Ben Ayed,
W Boeglin,
J Bradley,
P K Browning,
J Brunner,
P Cahyna,
M Carr,
F Casson,
M Cecconello,
C Challis,
IT Chapman,
S Chapman,
S Conroy,
N Conway,
WA Cooper,
M Cox,
N Crocker
, et al. (138 additional authors not shown)
Abstract:
New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbu…
▽ More
New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbulence. At the edge detailed studies have revealed how filament characteristic are responsible for determining the near and far SOL density profiles. In the core the intrinsic rotation and electron scale turbulence have been measured. The role that the fast ion gradient has on redistributing fast ions through fishbone modes has led to a redesign of the neutral beam injector on MAST Upgrade. In H-mode the turbulence at the pedestal top has been shown to be consistent with being due to electron temperature gradient modes. A reconnection process appears to occur during ELMs and the number of filaments released determines the power profile at the divertor. Resonant magnetic perturbations can mitigate ELMs provided the edge peeling response is maximised and the core kink response minimised. The mitigation of intrinsic error fields with toroidal mode number n>1 has been shown to be important for plasma performance.
△ Less
Submitted 18 November, 2016;
originally announced November 2016.
-
Rivulet flow over a flexible beam
Authors:
P. D. Howell,
H. Kim,
M. G. Popova,
H. A. Stone
Abstract:
We study theoretically and experimentally how a thin layer of liquid flows along a flexible beam. The flow is modelled using lubrication theory and the substrate is modelled as an elastica which deforms according to the Euler-Bernoulli equation. A constant flux of liquid is supplied at one end of the beam, which is clamped horizontally, while the other end of the beam is free. As the liquid film s…
▽ More
We study theoretically and experimentally how a thin layer of liquid flows along a flexible beam. The flow is modelled using lubrication theory and the substrate is modelled as an elastica which deforms according to the Euler-Bernoulli equation. A constant flux of liquid is supplied at one end of the beam, which is clamped horizontally, while the other end of the beam is free. As the liquid film spreads, its weight causes the beam deflection to increase, which in turn enhances the spreading rate of the liquid. This feedback mechanism causes the front position $σ$(t) and the deflection angle at the front $φ$(t) to go through a number of different power-law behaviours. For early times, the liquid spreads like a horizontal gravity current, with $σ$(t) = $t^{4/5}$ and $φ$(t) = $t^{13/5}$. For intermediate times, the deflection of the beam leads to rapid acceleration of the liquid layer, with $σ$(t) = $t^4$ and $φ$(t) = $t^9$. Finally, when the beam has sagged to become almost vertical, the liquid film flows downward with $σ$(t) = $t$ and $φ$(t) ~ $π$/2. We demonstrate good agreement between these theoretical predictions and experimental results.
△ Less
Submitted 1 April, 2016;
originally announced April 2016.
-
The influence of van der Waals interactions on a bubble moving in a tube
Authors:
Naima H. Hammoud,
Philippe H. Trinh,
Peter D. Howell,
Howard A. Stone
Abstract:
We consider the unsteady thin-film dynamics of a long bubble of negligible viscosity that advances at a uniform speed in a cylindrical capillary tube. The bubble displaces a viscous, nonwetting fluid, creating a thin film between its interface and the tube walls. The film is considered thin enough that intermolecular forces in the form of van der Waals attractions are significant and thin-film rup…
▽ More
We consider the unsteady thin-film dynamics of a long bubble of negligible viscosity that advances at a uniform speed in a cylindrical capillary tube. The bubble displaces a viscous, nonwetting fluid, creating a thin film between its interface and the tube walls. The film is considered thin enough that intermolecular forces in the form of van der Waals attractions are significant and thin-film rupture is possible. In the case of negligible intermolecular forces, a steady-state solution exits where a film of uniform thickness is deposited in the annular region between the bubble interface and the tube walls. However, once intermolecular interactions are important, the interface is perturbed out of its steady state and either (i) the perturbation grows sufficiently before reaching the rear meniscus of the bubble such that rupture occurs; or (ii) the perturbation remains small due to weak intermolecular forces until it leaves the bubble interface through the rear meniscus. We obtain, both numerically and asymptotically, the time-scale over which rupture occurs, and thus, we find a critical capillary number, depending on the bubble length and the strength of the intermolecular forces, below which the film is predicted to rupture.
△ Less
Submitted 24 October, 2016; v1 submitted 4 January, 2016;
originally announced January 2016.
-
Laser Wire Scanner Compton Scattering Techniques for the Measurement of the Transverse Beam Size of Particle Beams at Future Linear Colliders
Authors:
I. Agapov,
K. Baleski,
G. A. Blair,
J. Bosser,
H. H. Braun,
E. Bravin,
G. Boorman,
S. T. Boogert,
J. Carter,
E. D'amico,
N. Delerue,
D. F. Howell,
S. Doebert,
C. Driouichi,
J. Frisch,
K. Honkavaaram S. Hutchins,
T. Kamps,
T. Lefevre,
H. Lewin,
T. Paris,
F. Poirier,
M. T. Price,
R. Maccaferi,
S. Malton,
G. Penn
, et al. (9 additional authors not shown)
Abstract:
This archive summarizes a working paper and conference proceedings related to laser wire scanner development for the Future Linear Collider (FLC) in the years 2001 to 2006. In particular the design, setup and data taking for the laser wire experiments at PETRA II and CT2 are described. The material is focused on the activities undertaken by Royal Holloway University of London (RHUL).
This archive summarizes a working paper and conference proceedings related to laser wire scanner development for the Future Linear Collider (FLC) in the years 2001 to 2006. In particular the design, setup and data taking for the laser wire experiments at PETRA II and CT2 are described. The material is focused on the activities undertaken by Royal Holloway University of London (RHUL).
△ Less
Submitted 9 December, 2014;
originally announced December 2014.
-
Laserwire at the Accelerator Test Facility 2 with Sub-Micrometre Resolution
Authors:
L. J. Nevay,
S. T. Boogert,
P. Karataev,
K. Kruchinin,
L. Corner,
D. F. Howell,
R. Walczak,
A. Aryshev,
J. Urakawa,
N. Terunuma
Abstract:
A laserwire transverse electron beam size measurement system has been developed and operated at the Accelerator Test Facility 2 (ATF2) at KEK. Special electron beam optics were developed to create an approximately 1 x 100 μm (vertical x horizontal) electron beam at the laserwire location, which was profiled using a 150 mJ, 71 ps laser pulse with a wavelength of 532 nm. The precise characterisation…
▽ More
A laserwire transverse electron beam size measurement system has been developed and operated at the Accelerator Test Facility 2 (ATF2) at KEK. Special electron beam optics were developed to create an approximately 1 x 100 μm (vertical x horizontal) electron beam at the laserwire location, which was profiled using a 150 mJ, 71 ps laser pulse with a wavelength of 532 nm. The precise characterisation of the laser propagation allows the non-Gaussian transverse profiles of the electron beam caused by the laser divergence to be deconvolved. A minimum vertical electron beam size of 1.07 ${\pm}$ 0.06 (stat.) ${\pm}$ 0.05 (sys.) μm was measured. A vertically focussing quadrupole just before the laserwire was varied whilst making laserwire measurements and the projected vertical emittance was measured to be 82.56 ${\pm}$ 3.04 pm rad.
△ Less
Submitted 29 May, 2014; v1 submitted 1 April, 2014;
originally announced April 2014.
-
Curvature suppresses the Rayleigh-Taylor instability
Authors:
Philippe H. Trinh,
Hyoungsoo Kim,
Naima Hammoud,
Peter D. Howell,
S. Jonathan Chapman,
Howard A. Stone
Abstract:
The dynamics of a thin liquid film on the underside of a curved cylindrical substrate is studied. The evolution of the liquid layer is investigated as the film thickness and the radius of curvature of the substrate are varied. A dimensionless parameter (a modified Bond number) that incorporates both geometric parameters, gravity, and surface tension is identified, and allows the observations to be…
▽ More
The dynamics of a thin liquid film on the underside of a curved cylindrical substrate is studied. The evolution of the liquid layer is investigated as the film thickness and the radius of curvature of the substrate are varied. A dimensionless parameter (a modified Bond number) that incorporates both geometric parameters, gravity, and surface tension is identified, and allows the observations to be classified according to three different flow regimes: stable films, films with transient growth of perturbations followed by decay, and unstable films. Experiments and theory confirm that, below a critical value of the Bond number, curvature of the substrate suppresses the Rayleigh-Taylor instability.
△ Less
Submitted 20 January, 2014; v1 submitted 17 January, 2014;
originally announced January 2014.
-
Measurement, correction and implications of the intrinsic error fields on MAST
Authors:
A. Kirk,
Yueqiang Liu,
R. Martin,
G. Cunningham,
D. Howell,
the MAST team
Abstract:
The misalignment of field coils in tokamaks can lead to toroidal asymmetries in the magnetic field, which are known as intrinsic error fields. These error fields often lead to the formation of locked modes in the plasma, which limit the lowest density that is achievable. The intrinsic error fields on MAST have been determined by the direct measurement of the toroidal asymmetry of the fields from t…
▽ More
The misalignment of field coils in tokamaks can lead to toroidal asymmetries in the magnetic field, which are known as intrinsic error fields. These error fields often lead to the formation of locked modes in the plasma, which limit the lowest density that is achievable. The intrinsic error fields on MAST have been determined by the direct measurement of the toroidal asymmetry of the fields from these coils and have been parameterised in terms of distortions to the coils. The error fields are corrected using error field correction coils, where the optimum correction is found by determining the current required to ensure that the discharge is furthest from the onset of a locked mode. These empirically derived corrections have been compared with the known coil distortions. In the vacuum approximation there is a factor of ~ 3 difference between the predicted and empirically determined correction. When the plasma response is included better agreement is obtained, but there are still some cases where the agreement is not good, which suggests that other effects such as the non-linear coupling of the error field to the plasma are important.
△ Less
Submitted 23 December, 2013;
originally announced December 2013.
-
Observation of confined current ribbon in JET plasmas
Authors:
E. R. Solano,
P. J. Lomas,
B. Alper,
G. S. Xu,
Y. Andrew,
G. Arnoux,
A. Boboc,
L. Barrera,
P. Belo,
M. N. A. Beurskens,
M. Brix,
K. Crombe,
E. de la Luna,
S. Devaux,
T. Eich,
S. Gerasimov,
C. Giroud,
D. Harting,
D. Howell,
A. Huber,
G. Kocsis,
A. Korotkov,
A. Lopez-Fraguas,
M. F. F. Nave,
E. Rachlew
, et al. (7 additional authors not shown)
Abstract:
we report the identification of a localised current structure inside the JET plasma. It is a field aligned closed helical ribbon, carrying current in the same direction as the background current profile (co-current), rotating toroidally with the ion velocity (co-rotating). It appears to be located at a flat spot in the plasma pressure profile, at the top of the pedestal. The structure appears sp…
▽ More
we report the identification of a localised current structure inside the JET plasma. It is a field aligned closed helical ribbon, carrying current in the same direction as the background current profile (co-current), rotating toroidally with the ion velocity (co-rotating). It appears to be located at a flat spot in the plasma pressure profile, at the top of the pedestal. The structure appears spontaneously in low density, high rotation plasmas, and can last up to 1.4 s, a time comparable to a local resistive time. It considerably delays the appearance of the first ELM.
△ Less
Submitted 30 October, 2009;
originally announced October 2009.
-
Status of the ATF extraction line laser-wire
Authors:
Nicolas Delerue,
Fred Gannaway,
David Howell,
Grahame Blair,
Gary Boorman,
Chafik Driouichi,
Stewart Boogert,
Alexander Aryshev,
Pavel Karataev,
Nobuhiro Terunuma,
Junji Urakawa,
Axel Brachmann,
Joe Frisch,
Marc Ross
Abstract:
A new laser-wire is being installed in the extraction line of the ATF at KEK. This device aims at demonstrating that laser-wires can be used to measure micrometre scale beam size.
A new laser-wire is being installed in the extraction line of the ATF at KEK. This device aims at demonstrating that laser-wires can be used to measure micrometre scale beam size.
△ Less
Submitted 18 January, 2006;
originally announced January 2006.
-
Beam Profile Measurements and Simulations of the PETRA Laser-Wire
Authors:
J. Carter,
I. Agapov,
G. A. Blair,
G. Boorman,
C. Driouichi,
F. Poirier,
M. T. Price,
T. Kamps,
K. Balewski,
H. Lewin,
S. Schreiber,
K. Wittenburg,
N. Delerue,
D. F. Howell,
S. T. Boogert,
S. Malton
Abstract:
The Laser-wire will be an essential diagnostic tool at the International Linear Collider. It uses a finely focussed laser beam to measure the transverse profile of electron bunches by detecting the Compton-scattered photons (or degraded electrons) downstream of where the laser beam intersects the electron beam. Such a system has been installed at the PETRA storage ring at DESY, which uses a piez…
▽ More
The Laser-wire will be an essential diagnostic tool at the International Linear Collider. It uses a finely focussed laser beam to measure the transverse profile of electron bunches by detecting the Compton-scattered photons (or degraded electrons) downstream of where the laser beam intersects the electron beam. Such a system has been installed at the PETRA storage ring at DESY, which uses a piezo-driven mirror to scan the laser-light across the electron beam. Lat- est results of experimental data taking are presented and compared to detailed simulations using the Geant4 based program BDSIM.
△ Less
Submitted 19 August, 2005;
originally announced August 2005.
