-
Position reconstruction and surface background model for the PandaX-4T detector
Authors:
Zhicheng Qian,
Linhui Gu,
Chen Cheng,
Zihao Bo,
Wei Chen,
Xun Chen,
Yunhua Chen,
Zhaokan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Zhixing Gao,
Lisheng Geng,
Karl Giboni,
Xunan Guo,
Xuyuan Guo,
Zichao Guo,
Chencheng Han,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Houqi Huang,
Junting Huang,
Ruquan Hou
, et al. (78 additional authors not shown)
Abstract:
We report the position reconstruction methods and surface background model for the PandaX-4T dark matter direct search experiment. This work develops two position reconstruction algorithms: template matching (TM) method and photon acceptance function (PAF) method. Both methods determine the horizontal position of events based on the light pattern of secondary scintillation collected by the light s…
▽ More
We report the position reconstruction methods and surface background model for the PandaX-4T dark matter direct search experiment. This work develops two position reconstruction algorithms: template matching (TM) method and photon acceptance function (PAF) method. Both methods determine the horizontal position of events based on the light pattern of secondary scintillation collected by the light sensors. After a comprehensive evaluation of resolution, uniformity, and robustness, the PAF method was selected for position reconstruction, while the TM method was employed for verification. The PAF method achieves a bulk event resolution of 1.0 mm and a surface event resolution of 4.4 mm for a typical $S2$ signal with a bottom charge of 1500 PE (about 14 keV). The uniformity is around 20\%. Robustness studies reveal average deviations of 5.1 mm and 8.8 mm for the commissioning run (Run0) and the first science run (Run1), respectively, due to the deactivation of certain PMTs. A data-driven surface background model is developed based on the PAF method. The surface background is estimated to be $0.09 \pm 0.06$ events for Run0 (0.54 tonne$\cdot$year) and $0.17 \pm 0.11$ events for Run1 (1.00 tonne$\cdot$year).
△ Less
Submitted 11 February, 2025;
originally announced February 2025.
-
Density of States Calculation of CeO$_2$ Based on VASP
Authors:
Ruyi Hou
Abstract:
In this study, the Density of States (DOS) of CeO$_2$ was analyzed in detail using the Density Functional Theory (DFT) method based on VASP software. As an important functional material, CeO$_2$ finds wide applications in catalysis, optics, and electronic devices. Through structural optimization, self-consistent electronic calculations, and non-self-consistent calculations, we thoroughly investiga…
▽ More
In this study, the Density of States (DOS) of CeO$_2$ was analyzed in detail using the Density Functional Theory (DFT) method based on VASP software. As an important functional material, CeO$_2$ finds wide applications in catalysis, optics, and electronic devices. Through structural optimization, self-consistent electronic calculations, and non-self-consistent calculations, we thoroughly investigated the crystal structure and electronic energy level distribution of CeO$_2$. The lattice parameter optimization results from the structural calculations indicated a stable crystal structure for CeO$_2$. Self-consistent electronic calculations revealed a bandgap of approximately 2.403 eV, with the valence band maximum primarily contributed by O 2p orbitals and the conduction band minimum mainly originating from Ce 4f orbitals. Non-self-consistent calculations further demonstrated the total DOS and partial DOS of CeO$_2$, confirming the significant roles of Ce 4f and O 2p states in its electronic conduction and optical properties. These results not only provide theoretical support for the applications of CeO$_2$ in catalysis and electronic materials but also deepen our understanding of its fundamental electronic structural characteristics, offering guidance for the design and development of novel CeO$_2$-based materials.
△ Less
Submitted 11 February, 2025; v1 submitted 18 January, 2025;
originally announced January 2025.
-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Detecting Neutrinos from Supernova Bursts in PandaX-4T
Authors:
Binyu Pang,
Abdusalam Abdukerim,
Zihao Bo,
Wei Chen,
Xun Chen,
Chen Cheng,
Zhaokan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Chencheng Han,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang,
Junting Huang,
Zhou Huang,
Ruquan Hou
, et al. (71 additional authors not shown)
Abstract:
Neutrinos from core-collapse supernovae are essential for the understanding of neutrino physics and stellar evolution. The dual-phase xenon dark matter detectors can provide a way to track explosions of galactic supernovae by detecting neutrinos through coherent elastic neutrino-nucleus scatterings. In this study, a variation of progenitor masses as well as explosion models are assumed to predict…
▽ More
Neutrinos from core-collapse supernovae are essential for the understanding of neutrino physics and stellar evolution. The dual-phase xenon dark matter detectors can provide a way to track explosions of galactic supernovae by detecting neutrinos through coherent elastic neutrino-nucleus scatterings. In this study, a variation of progenitor masses as well as explosion models are assumed to predict the neutrino fluxes and spectra, which result in the number of expected neutrino events ranging from 6.6 to 13.7 at a distance of 10 kpc over a 10-second duration with negligible backgrounds at PandaX-4T. Two specialized triggering alarms for monitoring supernova burst neutrinos are built. The efficiency of detecting supernova explosions at various distances in the Milky Way is estimated. These alarms will be implemented in the real-time supernova monitoring system at PandaX-4T in the near future, providing the astronomical communities with supernova early warnings.
△ Less
Submitted 10 March, 2024;
originally announced March 2024.
-
Signal Response Model in PandaX-4T
Authors:
Yunyang Luo,
Zihao Bo,
Shibo Zhang,
Abdusalam Abdukerim,
Chen Cheng,
Wei Chen,
Xun Chen,
Yunhua Chen,
Zhaokan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Chencheng Han,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang,
Zhou Huang
, et al. (66 additional authors not shown)
Abstract:
PandaX-4T experiment is a deep-underground dark matter direct search experiment that employs a dual-phase time projection chamber with a sensitive volume containing 3.7 tonne of liquid xenon. The detector of PandaX-4T is capable of simultaneously collecting the primary scintillation and ionization signals, utilizing their ratio to discriminate dark matter signals from background sources such as ga…
▽ More
PandaX-4T experiment is a deep-underground dark matter direct search experiment that employs a dual-phase time projection chamber with a sensitive volume containing 3.7 tonne of liquid xenon. The detector of PandaX-4T is capable of simultaneously collecting the primary scintillation and ionization signals, utilizing their ratio to discriminate dark matter signals from background sources such as gamma rays and beta particles. The signal response model plays a crucial role in interpreting the data obtained by PandaX-4T. It describes the conversion from the deposited energy by dark matter interactions to the detectable signals within the detector. The signal response model is utilized in various PandaX-4T results. This work provides a comprehensive description of the procedures involved in constructing and parameter-fitting the signal response model for the energy range of approximately 1 keV to 25 keV for electronic recoils and 6 keV to 90 keV for nuclear recoils. It also covers the signal reconstruction, selection, and correction methods, which are crucial components integrated into the signal response model.
△ Less
Submitted 14 June, 2024; v1 submitted 7 March, 2024;
originally announced March 2024.
-
Waveform Simulation in PandaX-4T
Authors:
Jiafu Li,
Abdusalam Abdukerim,
Chen Cheng,
Zihao Bo,
Wei Chen,
Xun Chen,
Yunhua Chen,
Zhaokan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Chencheng Han,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang,
Zhou Huang,
Ruquan Hou
, et al. (66 additional authors not shown)
Abstract:
Signal reconstruction through software processing is a crucial component of the background and signal models in the PandaX-4T experiment, which is a multi-tonne dark matter direct search experiment. The accuracy of signal reconstruction is influenced by various detector artifacts, including noise, dark count of photomultiplier, impurity photoionization in the detector, and other relevant considera…
▽ More
Signal reconstruction through software processing is a crucial component of the background and signal models in the PandaX-4T experiment, which is a multi-tonne dark matter direct search experiment. The accuracy of signal reconstruction is influenced by various detector artifacts, including noise, dark count of photomultiplier, impurity photoionization in the detector, and other relevant considerations. In this study, we present a detailed description of a semi-data-driven approach designed to simulate the signal waveform. This work provides a reliable model for the efficiency and bias of the signal reconstruction in the data analysis of PandaX-4T. By comparing critical variables which relate to the temporal shape and hit pattern of the signals, we demonstrate a good agreement between the simulation and data.
△ Less
Submitted 21 May, 2024; v1 submitted 18 December, 2023;
originally announced December 2023.
-
Raman and IR spectra of water under graphene nanoconfinement at ambient and extreme pressure-temperature conditions: a first-principles study
Authors:
Rui Hou,
Chu Li,
Ding Pan
Abstract:
The nanoconfinement of water can result in dramatic differences in its physical and chemical properties compared to bulk water. However, a detailed molecular-level understanding of these properties is still lacking. Vibrational spectroscopy, such as Raman and infrared, is a popular experimental tool for studying the structure and dynamics of water, and is often complemented by atomistic simulation…
▽ More
The nanoconfinement of water can result in dramatic differences in its physical and chemical properties compared to bulk water. However, a detailed molecular-level understanding of these properties is still lacking. Vibrational spectroscopy, such as Raman and infrared, is a popular experimental tool for studying the structure and dynamics of water, and is often complemented by atomistic simulations to interpret experimental spectra, but there have been few theoretical spectroscopy studies of nanoconfined water using first-principles methods at ambient conditions, let alone under extreme pressure-temperature conditions. Here, we computed the Raman and IR spectra of water nanoconfined by graphene at ambient and extreme pressure-temperature conditions using ab intio simulations. Our results revealed alterations in the Raman stretching and low-frequency bands due to the graphene confinement. We also found spectroscopic evidence indicating that nanoconfinement considerably changes the tetrahedral hydrogen bond network, which is typically found in bulk water. Furthermore, we observed an unusual bending band in the Raman spectrum at ~10 GPa and 1000 K, which is attributed to the unique molecular structure of confined ionic water. Additionally, we found that at ~20 GPa and 1000 K, confined water transformed into a superionic fluid, making it challenging to identify the IR stretching band. Finally, we computed the ionic conductivity of confined water in the ionic and superionic phases. Our results highlight the efficacy of Raman and IR spectroscopy in studying the structure and dynamics of nanoconfined water in a large pressure-temperature range. Our predicted Raman and IR spectra can serve as a valuable guide for future experiments.
△ Less
Submitted 17 August, 2023;
originally announced August 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 10 September, 2024; v1 submitted 17 May, 2023;
originally announced May 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Track-based alignment for the BESIII CGEM detector in the cosmic-ray test
Authors:
A. Q. Guo,
L. H. Wu,
L. L. Wang,
R. E. Mitchell,
A. Amoroso,
R. Baldini Ferroli,
I. Balossino,
M. Bertani,
D. Bettoni,
F. Bianchi,
A. Bortone,
G. Cibinetto,
A. Cotta Ramusino,
F. Cossio,
M. Y. Dong,
M. Da Rocha Rolo,
F. De Mori,
M. Destefanis,
J. Dong,
F. Evangelisti,
R. Farinelli,
L. Fava,
G. Felici,
I. Garzia,
M. Gatta
, et al. (27 additional authors not shown)
Abstract:
The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector operating on the Beijing Electron Positron Collider II (BEPCII). After more than ten year's operation, the efficiency of the inner layers of the Main Drift Chamber (MDC) decreased significantly. To solve this issue, the BESIII collaboration is planning to replace the inner part of the MDC with three layers of Cylindrical tri…
▽ More
The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector operating on the Beijing Electron Positron Collider II (BEPCII). After more than ten year's operation, the efficiency of the inner layers of the Main Drift Chamber (MDC) decreased significantly. To solve this issue, the BESIII collaboration is planning to replace the inner part of the MDC with three layers of Cylindrical triple Gas Electron Multipliers (CGEM). The transverse plane spatial resolution of CGEM is required to be 120 $μ$m or better. To meet this goal, a careful calibration of the detector is necessary to fully exploit the potential of the CGEM detector. In all the calibrations, the detector alignment plays an important role to improve the detector precision. The track-based alignment for the CGEM detector with the Millepede algorithm is implemented to reduce the uncertainties of the hit position measurement. Using the cosmic-ray data taken in 2020 with the two layers setup, the displacement and rotation of the outer layer with respect to the inner layer is determined by a simultaneous fit applied to more than 160000 tracks. A good alignment precision has been achieved that guarantees the design request could be satisfied in the future. A further alignment is going to be performed using the combined information of tracks from cosmic-ray and collisions after the CGEM is installed into the BESIII detector.
△ Less
Submitted 14 December, 2022; v1 submitted 2 November, 2022;
originally announced November 2022.
-
Neutron-induced nuclear recoil background in the PandaX-4T experiment
Authors:
Zhou Huang,
Guofang Shen,
Qiuhong Wang,
Abdusalam Abdukerim,
Zihao Bo,
Wei Chen,
Xun Chen,
Yunhua Chen,
Chen Cheng,
Yunshan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Chencheng Han,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang
, et al. (55 additional authors not shown)
Abstract:
Neutron-induced nuclear recoil background is critical to the dark matter searches in the PandaX-4T liquid xenon experiment. This paper studies the feature of neutron background in liquid xenon and evaluates their contribution in the single scattering nuclear recoil events through three methods. The first method is fully Monte Carlo simulation based. The last two are data-driven methods that also u…
▽ More
Neutron-induced nuclear recoil background is critical to the dark matter searches in the PandaX-4T liquid xenon experiment. This paper studies the feature of neutron background in liquid xenon and evaluates their contribution in the single scattering nuclear recoil events through three methods. The first method is fully Monte Carlo simulation based. The last two are data-driven methods that also use the multiple scattering signals and high energy signals in the data, respectively. In the PandaX-4T commissioning data with an exposure of 0.63 tonne-year, all these methods give a consistent result that there are $1.15\pm0.57$ neutron-induced background in dark matter signal region within an approximated nuclear recoil energy window between 5 and 100 keV.
△ Less
Submitted 29 July, 2022; v1 submitted 13 June, 2022;
originally announced June 2022.
-
Variational Quantum Computation of Molecular Linear Response Properties on a Superconducting Quantum Processor
Authors:
Kaixuan Huang,
Xiaoxia Cai,
Hao Li,
Zi-Yong Ge,
Ruijuan Hou,
Hekang Li,
Tong Liu,
Yunhao Shi,
Chitong Chen,
Dongning Zheng,
Kai Xu,
Zhi-Bo Liu,
Zhendong Li,
Heng Fan,
Wei-Hai Fang
Abstract:
Simulating response properties of molecules is crucial for interpreting experimental spectroscopies and accelerating materials design. However, it remains a long-standing computational challenge for electronic structure methods on classical computers. While quantum computers hold the promise to solve this problem more efficiently in the long run, existing quantum algorithms requiring deep quantum…
▽ More
Simulating response properties of molecules is crucial for interpreting experimental spectroscopies and accelerating materials design. However, it remains a long-standing computational challenge for electronic structure methods on classical computers. While quantum computers hold the promise to solve this problem more efficiently in the long run, existing quantum algorithms requiring deep quantum circuits are infeasible for near-term noisy quantum processors. Here, we introduce a pragmatic variational quantum response (VQR) algorithm for response properties, which circumvents the need for deep quantum circuits. Using this algorithm, we report the first simulation of linear response properties of molecules including dynamic polarizabilities and absorption spectra on a superconducting quantum processor. Our results indicate that a large class of important dynamical properties such as Green's functions are within the reach of near-term quantum hardware using this algorithm in combination with suitable error mitigation techniques.
△ Less
Submitted 26 September, 2022; v1 submitted 7 January, 2022;
originally announced January 2022.
-
A Search for the Cosmic Ray Boosted Sub-GeV Dark Matter at the PandaX-II Experiment
Authors:
Xiangyi Cui,
Abdusalam Abdukerim,
Zihao Bo,
Wei Chen,
Xun Chen,
Yunhua Chen,
Chen Cheng,
Yunshan Cheng,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang,
Zhou Huang,
Ruquan Hou,
Xiangdong Ji,
Yonglin Ju
, et al. (54 additional authors not shown)
Abstract:
We report a novel search for the cosmic ray boosted dark matter using the 100~tonne$\cdot$day full data set of the PandaX-II detector located at the China Jinping Underground Laboratory. With the extra energy gained from the cosmic rays, sub-GeV dark matter particles can produce visible recoil signals in the detector. The diurnal modulations in rate and energy spectrum are utilized to further enha…
▽ More
We report a novel search for the cosmic ray boosted dark matter using the 100~tonne$\cdot$day full data set of the PandaX-II detector located at the China Jinping Underground Laboratory. With the extra energy gained from the cosmic rays, sub-GeV dark matter particles can produce visible recoil signals in the detector. The diurnal modulations in rate and energy spectrum are utilized to further enhance the signal sensitivity. Our result excludes the dark matter-nucleon elastic scattering cross section between 10$^{-31}$cm$^{2}$ and 10$^{-28}$cm$^{2}$ for a dark matter masses from 0.1 MeV/$c^2$ to 0.1 GeV/$c^2$, with a large parameter space previously unexplored by experimental collaborations.
△ Less
Submitted 11 April, 2022; v1 submitted 16 December, 2021;
originally announced December 2021.
-
Low Radioactive Material Screening and Background Control for the PandaX-4T Experiment
Authors:
Zhicheng Qian,
Lin Si,
Abdusalam Abdukerim,
Zihao Bo,
Wei Chen,
Xun Chen,
Yunhua Chen,
Chen Cheng,
Yunshan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang,
Zhou Huang,
Ruquan Hou
, et al. (54 additional authors not shown)
Abstract:
PandaX-4T is a ton-scale dark matter direct detection experiment using a dual-phase TPC technique at the China Jinping Underground Laboratory. Various ultra-low background technologies have been developed and applied to material screening for PandaX-4T, including HPGe gamma spectroscopy, ICP-MS, NAA, radon emanation measurement system, krypton assay station, and alpha detection system. Low backgro…
▽ More
PandaX-4T is a ton-scale dark matter direct detection experiment using a dual-phase TPC technique at the China Jinping Underground Laboratory. Various ultra-low background technologies have been developed and applied to material screening for PandaX-4T, including HPGe gamma spectroscopy, ICP-MS, NAA, radon emanation measurement system, krypton assay station, and alpha detection system. Low background materials were selected to assemble the detector. Surface treatment procedures were investigated to further suppress radioactive background. Combining measured results and Monte Carlo simulation, the total material background rates of PandaX-4T in the energy region of 1-25 keV$\rm{}_{ee}$ are estimated to be (9.9 $\pm$ 1.9) $\times \ 10^{-3}$ mDRU for electron recoil and (2.8 $\pm$ 0.6) $\times \ 10^{-4}$ mDRU for nuclear recoil. In addition, $^{nat}$Kr in the detector is estimated to be <8 ppt.
△ Less
Submitted 23 April, 2022; v1 submitted 6 December, 2021;
originally announced December 2021.
-
Light yield and field dependence measurement in PandaX-II dual-phase xenon detector
Authors:
Zhou Huang,
Abdusalam Abdukerim,
Zihao Bo,
Wei Chen,
Xun Chen,
Yunhua Chen,
Chen Cheng,
Yunshan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang,
Ruquan Hou,
Xiangdong Ji,
Yonglin Ju
, et al. (54 additional authors not shown)
Abstract:
The dual-phase xenon time projection chamber (TPC) is one of the most sensitive detector technology for dark matter direct search, where the energy deposition of incoming particle can be converted into photons and electrons through xenon excitation and ionization. The detector response to signal energy deposition varies significantly with the electric field in liquid xenon. We study the detector's…
▽ More
The dual-phase xenon time projection chamber (TPC) is one of the most sensitive detector technology for dark matter direct search, where the energy deposition of incoming particle can be converted into photons and electrons through xenon excitation and ionization. The detector response to signal energy deposition varies significantly with the electric field in liquid xenon. We study the detector's light yield and its dependence on the electric field in the PandaX-II dual-phase detector containing 580~kg liquid xenon in the sensitive volume. From our measurements, the light yield at electric fields from 0~V/cm to 317~V/cm is obtained for energy depositions up to 236~keV.
△ Less
Submitted 3 December, 2021; v1 submitted 2 November, 2021;
originally announced November 2021.
-
Dark Matter Search Results from the PandaX-4T Commissioning Run
Authors:
Yue Meng,
Zhou Wang,
Yi Tao,
Abdusalam Abdukerim,
Zihao Bo,
Wei Chen,
Xun Chen,
Yunhua Chen,
Chen Cheng,
Yunshan Cheng,
Xiangyi Cui,
Yingjie Fan,
Deqing Fang,
Changbo Fu,
Mengting Fu,
Lisheng Geng,
Karl Giboni,
Linhui Gu,
Xuyuan Guo,
Ke Han,
Changda He,
Jinrong He,
Di Huang,
Yanlin Huang,
Zhou Huang
, et al. (54 additional authors not shown)
Abstract:
We report the first dark matter search results using the commissioning data from PandaX-4T. Using a time projection chamber with 3.7-tonne of liquid xenon target and an exposure of 0.63 tonne$\cdot$year, 1058 candidate events are identified within an approximate nuclear recoil energy window between 5 and 100 keV. No significant excess over background is observed. Our data set a stringent limit to…
▽ More
We report the first dark matter search results using the commissioning data from PandaX-4T. Using a time projection chamber with 3.7-tonne of liquid xenon target and an exposure of 0.63 tonne$\cdot$year, 1058 candidate events are identified within an approximate nuclear recoil energy window between 5 and 100 keV. No significant excess over background is observed. Our data set a stringent limit to the dark matter-nucleon spin-independent interactions, with a lowest excluded cross section (90% C.L.) of $3.8\times10^{-47} $cm$^2$ at a dark matter mass of 30 GeV/$c^2$.
△ Less
Submitted 17 December, 2021; v1 submitted 28 July, 2021;
originally announced July 2021.
-
Raman spectra of hydrocarbons under extreme conditions of pressure and temperature: a first-principles study
Authors:
Rui Hou,
Ding Pan
Abstract:
Hydrocarbons are of great importance in carbon-bearing fluids in deep Earth and in ice giant planets at extreme pressure (P)-temperature (T) conditions. Raman spectroscopy is a powerful tool to study the chemical speciation of hydrocarbons; however, it is challenging to interpret Raman data at extreme conditions. Here, we performed ab initio molecular dynamics simulations coupled with the modern t…
▽ More
Hydrocarbons are of great importance in carbon-bearing fluids in deep Earth and in ice giant planets at extreme pressure (P)-temperature (T) conditions. Raman spectroscopy is a powerful tool to study the chemical speciation of hydrocarbons; however, it is challenging to interpret Raman data at extreme conditions. Here, we performed ab initio molecular dynamics simulations coupled with the modern theory of polarization to calculate Raman spectra of methane, ethane, and propane up to 48 GPa and 2000 K. Our method includes anharmonic temperature effects. We studied the pressure and temperature effects on the Raman bands, and identified the characteristic Raman modes for the C-C and C-C-C bonds. Our result may help to interpret in-situ Raman data of hydrocarbons at extreme P-T conditions, with important implications for understanding the deep carbon cycle inside Earth and the compositions of ice giant planets.
△ Less
Submitted 15 May, 2021;
originally announced May 2021.
-
Dielectric constant of supercritical water in a large pressure-temperature range
Authors:
Rui Hou,
Yuhui Quan,
Ding Pan
Abstract:
A huge amount of water at supercritical conditions exists in Earth's interior, where its dielectric properties play a critical role in determining how it stores and transports materials. However, it is very challenging to obtain the static dielectric constant of water, $ε_0$, in a wide pressure-temperature (P-T) range as found in deep Earth either experimentally or by first-principles simulations.…
▽ More
A huge amount of water at supercritical conditions exists in Earth's interior, where its dielectric properties play a critical role in determining how it stores and transports materials. However, it is very challenging to obtain the static dielectric constant of water, $ε_0$, in a wide pressure-temperature (P-T) range as found in deep Earth either experimentally or by first-principles simulations. Here, we introduce a neural network dipole model, which, combined with molecular dynamics, can be used to compute P-T dependent dielectric properties of water as accurately as first-principles methods but much more efficiently. We found that $ε_0$ may vary by one order of magnitude in Earth's upper mantle, suggesting that the solvation properties of water change dramatically at different depths. There is a subtle interplay between the molecular dipole moment and the dipolar angular correlation in governing the change of $ε_0$. We also calculated the frequency-dependent dielectric constant of water in the microwave range, which, to the best of our knowledge, has not been calculated from first principles, and found that temperature affects the dielectric absorption more than pressure. Our results are of great use in many areas, e.g., modelling water-rock interactions in geochemistry. The computational approach introduced here can be readily applied to other molecular fluids.
△ Less
Submitted 14 September, 2020; v1 submitted 20 June, 2020;
originally announced June 2020.
-
Taking the pulse of COVID-19: A spatiotemporal perspective
Authors:
Chaowei Yang,
Dexuan Sha,
Qian Liu,
Yun Li,
Hai Lan,
Weihe Wendy Guan,
Tao Hu,
Zhenlong Li,
Zhiran Zhang,
John Hoot Thompson,
Zifu Wang,
David Wong,
Shiyang Ruan,
Manzhu Yu,
Douglas Richardson,
Luyao Zhang,
Ruizhi Hou,
You Zhou,
Cheng Zhong,
Yifei Tian,
Fayez Beaini,
Kyla Carte,
Colin Flynn,
Wei Liu,
Dieter Pfoser
, et al. (10 additional authors not shown)
Abstract:
The sudden outbreak of the Coronavirus disease (COVID-19) swept across the world in early 2020, triggering the lockdowns of several billion people across many countries, including China, Spain, India, the U.K., Italy, France, Germany, and most states of the U.S. The transmission of the virus accelerated rapidly with the most confirmed cases in the U.S., and New York City became an epicenter of the…
▽ More
The sudden outbreak of the Coronavirus disease (COVID-19) swept across the world in early 2020, triggering the lockdowns of several billion people across many countries, including China, Spain, India, the U.K., Italy, France, Germany, and most states of the U.S. The transmission of the virus accelerated rapidly with the most confirmed cases in the U.S., and New York City became an epicenter of the pandemic by the end of March. In response to this national and global emergency, the NSF Spatiotemporal Innovation Center brought together a taskforce of international researchers and assembled implemented strategies to rapidly respond to this crisis, for supporting research, saving lives, and protecting the health of global citizens. This perspective paper presents our collective view on the global health emergency and our effort in collecting, analyzing, and sharing relevant data on global policy and government responses, geospatial indicators of the outbreak and evolving forecasts; in developing research capabilities and mitigation measures with global scientists, promoting collaborative research on outbreak dynamics, and reflecting on the dynamic responses from human societies.
△ Less
Submitted 8 May, 2020;
originally announced May 2020.
-
Spatiotemporal Patterns of COVID-19 Impact on Human Activities and Environment in China Using Nighttime Light and Air Quality Data
Authors:
Qian Liu,
Dexuan Sha,
Wei Liu,
Paul Houser,
Luyao Zhang,
Ruizhi Hou,
Hai Lan,
Colin Flynn,
Mingyue Lu,
Tao Hu,
Chaowei Yang
Abstract:
In order to analyze the impact of COVID-19 on people's lives, activities and the natural environment, this paper investigates the spatial and temporal characteristics of Night Time Light (NTL) radiance and Air Quality Index (AQI) before and during the pandemic in mainland China. Our results show that the monthly average NTL brightness is much lower during the quarantine period than before. This st…
▽ More
In order to analyze the impact of COVID-19 on people's lives, activities and the natural environment, this paper investigates the spatial and temporal characteristics of Night Time Light (NTL) radiance and Air Quality Index (AQI) before and during the pandemic in mainland China. Our results show that the monthly average NTL brightness is much lower during the quarantine period than before. This study categorizes NTL into three classes: residential area, transportation and public facilities and commercial centers, with NTL radiance ranges of 5-20, 20-40 and greater than 40 nW/(cm*cm*sr), respectively. We found that the Number Of Pixels (NOP) with NTL detection increased in the residential area and decreased in the commercial centers for most of the provinces after the shutdown, while transportation and public facilities generally stayed the same. More specifically, we examined these factors in Wuhan, where the first confirmed cases were reported, and where the earliest quarantine measures were taken. Observations and analysis of pixels associated with commercial centers were observed to have lower NTL radiance values, indicating a dimming behavior, while residential area pixels recorded increased levels of brightness, after the beginning of the lockdown. The study also discovered a significant decreasing trend in the daily average AQI for the whole country, with cleaner air in most provinces during February and March, compared to January 2020. In conclusion, the outbreak and spread of COVID-19 has had a crucial impact on people's daily lives and activity ranges through the increased implementation of lockdown and quarantine policies. On the other hand, the air quality of China has improved with the reduction of non-essential industries and motor vehicle usage.
△ Less
Submitted 3 May, 2020;
originally announced May 2020.
-
Widely tunable cavity-enhanced frequency combs
Authors:
Myles C. Silfies,
Grzegorz Kowzan,
Yuning Chen,
Neomi Lewis,
Ryan Hou,
Robin Baehre,
Tobias Gross,
Thomas K. Allison
Abstract:
We describe the cavity-enhancement of frequency combs over a wide tuning range of 450-700 nm (> 7900 cm$^{-1}$), covering nearly the entire visible spectrum. Tunable visible frequency combs from a synchronously-pumped optical parametric oscillator are coupled into a 4-mirror, dispersion-managed cavity with a finesse of 600 to 1400. An intracavity absorption path length enhancement greater than 190…
▽ More
We describe the cavity-enhancement of frequency combs over a wide tuning range of 450-700 nm (> 7900 cm$^{-1}$), covering nearly the entire visible spectrum. Tunable visible frequency combs from a synchronously-pumped optical parametric oscillator are coupled into a 4-mirror, dispersion-managed cavity with a finesse of 600 to 1400. An intracavity absorption path length enhancement greater than 190 is obtained over the entire tuning range, while preserving intracavity spectral bandwidths capable of supporting sub-200 fs pulse durations. These tunable cavity-enhanced frequency combs can find many applications in nonlinear optics and spectroscopy.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
Bipedal nanowalker by pure physical mechanisms
Authors:
Juan Cheng,
Sarangapani Sreelatha,
Ruizheng Hou,
Artem Efremov,
Ruchuan Liu,
Johan RC van der Maarel,
Zhisong Wang
Abstract:
Artificial nanowalkers are inspired by biomolecular counterparts from living cells, but remain far from comparable to the latter in design principles. The walkers reported to date mostly rely on chemical mechanisms to gain a direction; they all produce chemical wastes. Here we report a light-powered DNA bipedal walker based on a design principle derived from cellular walkers. The walker has two id…
▽ More
Artificial nanowalkers are inspired by biomolecular counterparts from living cells, but remain far from comparable to the latter in design principles. The walkers reported to date mostly rely on chemical mechanisms to gain a direction; they all produce chemical wastes. Here we report a light-powered DNA bipedal walker based on a design principle derived from cellular walkers. The walker has two identical feet and the track has equal binding sites; yet the walker gains a direction by pure physical mechanisms that autonomously amplify an intra-site asymmetry into a ratchet effect. The nanowalker is free of any chemical waste. It has a distinct thermodynamic feature that it possesses the same equilibrium before and after operation, but generates a truly non-equilibrium distribution during operation. The demonstrated design principle exploits mechanical effects and is adaptable for use in other nanomachines.
△ Less
Submitted 21 August, 2013;
originally announced August 2013.
-
Role of directional fidelity in multiple extreme performance of F1-ATPase motor
Authors:
Ruizheng Hou,
Zhisong Wang
Abstract:
Quantitative understanding of the best possible performance of nanomotors allowed by physical laws pertains to study of nanomotors from biology as well as nanotechnology. Biological nanomotor F1-ATPase is the best available model system as it is the only nanomotor known for extreme energy conversion near the limit of energy conservation. Using a unified theoretical framework centred on a concept c…
▽ More
Quantitative understanding of the best possible performance of nanomotors allowed by physical laws pertains to study of nanomotors from biology as well as nanotechnology. Biological nanomotor F1-ATPase is the best available model system as it is the only nanomotor known for extreme energy conversion near the limit of energy conservation. Using a unified theoretical framework centred on a concept called directional fidelity, we analyze recent experiments in which F1-motor's performance was measured for controlled chemical potentials, and expose from the experiments quantitative evidence for the motor's multiple extreme performance in directional fidelity, speed and catalytic capability close to physical limits. Specifically, the motor nearly exhausts available energy from the fuel to retain the highest possible directional fidelity for arbitrary load, encompassing the motor's extreme energy conversion and beyond. The theory-experiment comparison implies a tight chemomechanical coupling up to stalemate as futile steps occur but unlikely involve fuel consumption. The F1-motor data also helps clarify relation between directional fidelity and experimentally measured stepping ratio.
△ Less
Submitted 21 August, 2013;
originally announced August 2013.
-
Directional fidelity of nanoscale motors and particles is limited by the second law of thermodynamics via a universal equality
Authors:
Zhisong Wang,
Ruizheng Hou,
Artem Efremov
Abstract:
Directional motion of nanoscale motors and driven particles in an isothermal environment costs a finite amount of energy despite zero work as decreed by the 2nd law, but quantifying this general limit remains difficult. Here we derive a universal equality linking directional fidelity of an arbitrary nanoscale object to the least possible energy driving it. The fidelity-energy equality depends on t…
▽ More
Directional motion of nanoscale motors and driven particles in an isothermal environment costs a finite amount of energy despite zero work as decreed by the 2nd law, but quantifying this general limit remains difficult. Here we derive a universal equality linking directional fidelity of an arbitrary nanoscale object to the least possible energy driving it. The fidelity-energy equality depends on the environmental temperature alone; any lower energy would violate the 2nd law in a thought experiment. Real experimental proof for the equality comes from force-induced motion of biological nanomotors by three independent groups for translational as well as rotational motion. Interestingly, the natural self-propelled motion of a biological nanomotor (F1-ATPase) known to have nearly 100% energy efficiency evidently pays the 2nd-law decreed least energy cost for direction production.
△ Less
Submitted 21 August, 2013;
originally announced August 2013.
-
Modeling Motility of the Kinesin Dimer from Molecular Properties of Individual Monomers
Authors:
Dagong Fan,
Wenwei Zheng,
Ruizheng Hou,
Fuli Li,
Zhisong Wang
Abstract:
Conventional kinesin is a homodimeric motor protein that unidirectionally transports organelles along filamentous microtubule (MT) by hydrolyzing ATP molecules. This study shows that the load modulations of ATP turnover and head diffusion are both essential in determining the performance of the dimer under loads. It is found that the consecutive run length of the dimer critically depends upon a…
▽ More
Conventional kinesin is a homodimeric motor protein that unidirectionally transports organelles along filamentous microtubule (MT) by hydrolyzing ATP molecules. This study shows that the load modulations of ATP turnover and head diffusion are both essential in determining the performance of the dimer under loads. It is found that the consecutive run length of the dimer critically depends upon a few pathways, leading to the detachment of individual heads from MT. Modifying rates for these detachment pathways changes the run length but not the velocity of the dimer, consistent with mutant experiments. The run length may increase with or without the ATP concentration, depending upon a single rate for pure mechanical detachment. This finding provides an explanation to a previous controversy concerning ATP dependence of the run length, and related quantitative predictions of this study can be tested by a future experiment. This study also finds that the experimental observations for assisting loads can be quantitatively explained by load-biased head diffusion. We thus conclude that the dimer motility under resisting as well as assisting loads is governed by essentially the same mechanisms.
△ Less
Submitted 10 July, 2009;
originally announced July 2009.
