Showing 1–50 of 50 results for author: Holloway, C L

An Imaging Radar Using a Rydberg Atom Receiver

Authors: William J. Watterson, Nikunjkumar Prajapati, Rodrigo Castillo-Garza, Samuel Berweger, Noah Schlossberger, Alexandra Artusio-Glimpse, Christopher L. Holloway, Matthew T. Simons

Abstract: Rydberg atoms in a gas form are highly sensitive electric field probes capable of detecting and measuring the amplitude, phase, and polarization of broadband time-varying signals. Here, we present the performance of a frequency modulated continuous wave (FMCW) radar using a Rydberg atom-based subwavelength sensor as a receiver. This sensor down converts the radar echoes, eliminates key FMCW electr… ▽ More Rydberg atoms in a gas form are highly sensitive electric field probes capable of detecting and measuring the amplitude, phase, and polarization of broadband time-varying signals. Here, we present the performance of a frequency modulated continuous wave (FMCW) radar using a Rydberg atom-based subwavelength sensor as a receiver. This sensor down converts the radar echoes, eliminates key FMCW electrical components, and performs two-dimensional target localization. To demonstrate its capabilities, we present an RF image of a scene containing targets in an anechoic room with radar cross sections down to 0 dBsm at a distance up to 5 m and with a range resolution of 4.7 cm. △ Less

Submitted 25 June, 2025; originally announced June 2025.

Population-resolved measurement of an avoided crossing of light-dressed states

Authors: Noah Schlossberger, Nikunjkumar Prajapati, Eric B. Norrgard, Stephen P. Eckel, Christopher L. Holloway

Abstract: A two-level system coupled by a coherent field is a ubiquitous system in atomic and molecular physics. In the rotating wave approximation, the light-dressed states are well described by a simple 2x2 Hamiltonian which can be easily solved analytically and is thus used in quantum mechanics education and as a basis for intuition for more complicated systems. The solution to the Hamiltonian is an avoi… ▽ More A two-level system coupled by a coherent field is a ubiquitous system in atomic and molecular physics. In the rotating wave approximation, the light-dressed states are well described by a simple 2x2 Hamiltonian which can be easily solved analytically and is thus used in quantum mechanics education and as a basis for intuition for more complicated systems. The solution to the Hamiltonian is an avoided crossing between the light-dressed ground and excited states. In experiments, the avoided crossing is probed spectroscopically, meaning only the energies, or eigenvalues of the Hamiltonian, are measured. Here, we present a measurement of the avoided crossing which also resolves population, thus indicating the amplitude coefficients of the eigenvectors of the Hamiltonian. We perform the measurement in Rydberg states of cold rubidium atoms, resolving the energies spectroscopically with our pump lasers and the populations of each state using selective field ionization. △ Less

Submitted 12 June, 2025; originally announced June 2025.

Angle-of-arrival detection of radio-frequency waves via Rydberg atom fluorescence imaging of standing waves in a glass vapor cell

Authors: Noah Schlossberger, Rajavardhan Talashila, Nikunjkumar Prajapati, Christopher L. Holloway

Abstract: We present a method for measuring the angle-of-arrival of 40 GHz radio-frequency (RF) radiation by mapping the standing waves generated in a rectangular glass vapor cell. These standing waves have regular and well-defined structure from which we can infer the angle and sign of the wavevector of the RF field. We map the field using spatially resolved light sheet spectroscopy of Rydberg states of ru… ▽ More We present a method for measuring the angle-of-arrival of 40 GHz radio-frequency (RF) radiation by mapping the standing waves generated in a rectangular glass vapor cell. These standing waves have regular and well-defined structure from which we can infer the angle and sign of the wavevector of the RF field. We map the field using spatially resolved light sheet spectroscopy of Rydberg states of rubidium atoms in the cell. Unlike traditional phased arrays, this detection scheme is compact and low-complexity, has an active area of nearly 4$π$ steradians, and is sensitive to all RF polarizations. For in-plane measurements ($φ= 0$), we demonstrate quantitative angle-of-arrival measurements with an uncertainty on the order of one degree in an 11~s measurement, and for out-of-plane measurements (arbitrary $θ$,$φ$), we demonstrate angle-of-arrival detection with uncertainty on the order of several degrees. △ Less

Submitted 24 April, 2025; originally announced April 2025.

Wafer-level fabrication of all-dielectric vapor cells enabling optically addressed Rydberg atom electrometry

Authors: Alexandra B. Artusio-Glimpse, Adil Meraki, Hunter Shillingburg, Guy Lavallee, Miao Liu, Chad Eichfeld, Matthew T. Simons, Glenn Holland, Christopher L. Holloway, Vladimir A. Aksyuk, Daniel Lopez

Abstract: Rydberg-atom electrometry enables highly sensitive electric-field measurements by exploiting the extreme polarizability of Rydberg states in alkali atoms. Millimeter-scale atomic vapor cells can be accurately and economically batch-fabricated by anodically bonding silicon and glass wafers, enabling the large-volume manufacturing of miniature atomic clocks and quantum sensors. However, silicon is n… ▽ More Rydberg-atom electrometry enables highly sensitive electric-field measurements by exploiting the extreme polarizability of Rydberg states in alkali atoms. Millimeter-scale atomic vapor cells can be accurately and economically batch-fabricated by anodically bonding silicon and glass wafers, enabling the large-volume manufacturing of miniature atomic clocks and quantum sensors. However, silicon is not always an ideal constitutive material for electric-field sensing because of its high dielectric constant and conductive losses at millimeter wave frequencies. A broader selection of low-loss all-dielectric alternatives may be beneficial for specific applications. Here, we present an all-glass wafer-level microfabrication process that eliminates silicon, creating hermetically sealed vapor cells that are stable over long timelines with embedded cesium dispensers. Femtosecond laser machining precisely defines the cell geometry, and laser-activated alkali loading ensures reliable filling. We demonstrate long-term vacuum stability and robust Rydberg excitation through electromagnetically induced transparency measurements of several Rydberg states. We then use these cells to measure a 34 GHz millimeter wave field resonant with the 58D$_{5/2}\rightarrow$60P$_{3/2}$ transition using Autler-Townes splitting showing expected linear dependence with field strength. This work demonstrates that the all-glass approach offers a highly durable low-loss cell alternative for miniaturized millimeter wave and microwave quantum sensing, with the potential to flexibly incorporate a range of other dielectric and semiconductor materials and integrated photonic and electronic technologies. △ Less

Submitted 17 April, 2025; v1 submitted 19 March, 2025; originally announced March 2025.

Determining angle of arrival of radio frequency fields using subwavelength, amplitude-only measurements of standing waves in a Rydberg atom sensor

Authors: Rajavardhan Talashila, William J. Watterson, Benjamin L. Moser, Joshua A. Gordon, Alexandra B. Artusio-Glimpse, Nikunjkumar Prajapati, Noah Schlossberger, Matthew T. Simons, Christopher L. Holloway

Abstract: Deep subwavelength RF imaging with atomic Rydberg sensors has overcome fundamental limitations of traditional antennas and enabled ultra-wideband detection of omni-directional time varying fields all in a compact form factor. However, in most applications, Rydberg sensors require the use of a secondary strong RF reference field to serve as a phase reference. Here, we demonstrate a new type of Rydb… ▽ More Deep subwavelength RF imaging with atomic Rydberg sensors has overcome fundamental limitations of traditional antennas and enabled ultra-wideband detection of omni-directional time varying fields all in a compact form factor. However, in most applications, Rydberg sensors require the use of a secondary strong RF reference field to serve as a phase reference. Here, we demonstrate a new type of Rydberg sensor for angle-of-arrival (AoA) sensing which utilizes subwavelength imaging of standing wave fields. By placing a metallic plate within the Rydberg cell, we can determine the AoA independent of the strength of incoming RF field and without requiring a secondary strong RF phase reference field. We perform precision AoA measurements with a robotic antenna positioning system for 4.2, 5.0, and 5.7 GHz signals and demonstrate a 1.7 deg polar angular resolution from 0 deg to 60 deg AoA and 4.1 deg over all possible angles. △ Less

Submitted 13 February, 2025; originally announced February 2025.

Imaging of induced surface charge distribution effects in glass vapor cells used for Rydberg atom-based sensors

Authors: Link Patrick, Noah Schlossberger, Daniel F. Hammerland, Nikunjkumar Prajapati, Tate McDonald, Samuel Berweger, Rajavardhan Talashila, Alexandra B. Artusio-Glimpse, Christopher L. Holloway

Abstract: We demonstrate the imaging of localized surface electric (E) field effects on the atomic spectrum in a vapor cell used in Rydberg atom-based sensors. These surface E-fields can result from an induced electric charge distribution on the surface. Induced surface charge distributions can dramatically perturb the atomic spectrum, hence degrading the ability to perform electrometry. These effects becom… ▽ More We demonstrate the imaging of localized surface electric (E) field effects on the atomic spectrum in a vapor cell used in Rydberg atom-based sensors. These surface E-fields can result from an induced electric charge distribution on the surface. Induced surface charge distributions can dramatically perturb the atomic spectrum, hence degrading the ability to perform electrometry. These effects become pronounced near the walls of the vapor cell, posing challenges for vapor cell miniaturization. Using a fluorescence imaging technique, we investigate the effects of surface charge on the atomic spectrum generated with electromagnetically induced transparency (EIT). Our results reveal that visible light (480 nm and 511 nm), i.e., the coupling laser used in two-photon Rydberg EIT schemes, generates localized patches of charge or dipoles where this light interacts with the glass walls of the vapor cell, while a three-photon Rydberg EIT scheme using only near-infrared wavelength lasers shows no measurable field induction. Additionally, imaging in a vacuum chamber where a glass plate is placed between large electrodes confirms that the induced charge is positive. We further validate these findings by studying the photoelectric effect with broadband light during EIT and impedance measurements. These results demonstrate the power of the fluorescence imaging technique to study localized E-field distributions in vapor cells and to target the photoelectric effect of the alkali-exposed glass of vapor cells as a major disruptor in Rydberg atom-based sensors. △ Less

Submitted 10 February, 2025; originally announced February 2025.

Two-dimensional imaging of electromagnetic fields via light sheet fluorescence imaging with Rydberg atoms

Authors: Noah Schlossberger, Tate McDonald, Kevin Su, Rajavardhan Talashila, Robert Behary, Charles L. Patrick, Daniel Hammerland, Eugeniy E. Mikhailov, Seth Aubin, Irina Novikova, Christopher L. Holloway, Nikunjkumar Prajapati

Abstract: The ability to image electromagnetic fields holds key scientific and industrial applications, including electromagnetic compatibility, diagnostics of high-frequency devices, and experimental scientific work involving field interactions. Generally electric and magnetic field measurements require conductive elements which significantly distort the field. However, electromagnetic fields can be measur… ▽ More The ability to image electromagnetic fields holds key scientific and industrial applications, including electromagnetic compatibility, diagnostics of high-frequency devices, and experimental scientific work involving field interactions. Generally electric and magnetic field measurements require conductive elements which significantly distort the field. However, electromagnetic fields can be measured without altering the field via the shift they induce on Rydberg states of alkali atoms in atomic vapor, which are highly sensitive to electric fields. Previous field measurements using Rydberg atoms utilized electromagnetically induced transparency to read out the shift on the states induced by the fields, but did not provide spatial resolution. In this work, we demonstrate that electromagnetically induced transparency can be spatially resolved by imaging the fluorescence of the atoms. We demonstrate that this can be used to image $\sim$ V/cm scale electric fields in the DC-GHz range and $\sim$ mT scale static magnetic fields, with minimal distortion to the fields. We also demonstrate the ability to image $\sim$ 5 mV/cm scale fields for resonant microwave radiation and measure standing waves generated by the partial reflection of the vapor cell walls in this regime. With additional processing techniques like lock-in detection, we predict that our sensitivities could reach down to nV/cm levels. We perform this field imaging with a spatial resolution of 160 $μ$m, limited by our imaging system, and estimate the fundamental resolution limitation to be 5 $μ$m. △ Less

Submitted 17 December, 2024; v1 submitted 17 December, 2024; originally announced December 2024.

Compact Blackbody Radiation Atomic Sensor: Measuring Temperature using Optically Excited Atoms in Vapor Cells

Authors: David S. La Mantia, Mingxin Lei, Nikunjkumar Prajapati, Noah Schlossberger, Matthew T. Simons, Christopher L. Holloway, Julia Scherschligt, Stephen P. Eckel, Eric B. Norrgard

Abstract: We demonstrate a blackbody radiation thermometer based on optically excited rubidium atoms in a vapor cell. The temperature measurement is fast, with statistical uncertainty as low as 0.1% in one second. We resolve temperature with a precision of 0.04% in the range 308 K to 344 K when averaging for several seconds. Additionally, we describe an extension to this measurement scheme where the device… ▽ More We demonstrate a blackbody radiation thermometer based on optically excited rubidium atoms in a vapor cell. The temperature measurement is fast, with statistical uncertainty as low as 0.1% in one second. We resolve temperature with a precision of 0.04% in the range 308 K to 344 K when averaging for several seconds. Additionally, we describe an extension to this measurement scheme where the device operates as a self-calibrated, or primary, thermometer. We make progress toward realizing a primary thermometer by demonstrating a temperature-dependent self-consistent calibration scheme, with temperature accuracy of order 1% limited by the uncertainty in atomic transition dipole matrix elements. △ Less

Submitted 20 November, 2024; originally announced November 2024.

Primary quantum thermometry of mm-wave blackbody radiation via induced state transfer in Rydberg states of cold atoms

Authors: Noah Schlossberger, Andrew P. Rotunno, Stephen P. Eckel, Eric B. Norrgard, Dixith Manchaiah, Nikunjkumar Prajapati, Alexandra B. Artusio-Glimpse, Samuel Berweger, Matthew T. Simons, Dangka Shylla, William J. Watterson, Charles Patrick, Adil Meraki, Rajavardhan Talashila, Amanda Younes, David S. La Mantia, Christopher L. Holloway

Abstract: Rydberg states of alkali atoms are highly sensitive to electromagnetic radiation in the GHz-to-THz regime because their transitions have large electric dipole moments. Consequently, environmental blackbody radiation (BBR) can couple Rydberg states together at $μ$s timescales. Here, we track the BBR-induced transfer of a prepared Rydberg state to its neighbors and use the evolution of these state p… ▽ More Rydberg states of alkali atoms are highly sensitive to electromagnetic radiation in the GHz-to-THz regime because their transitions have large electric dipole moments. Consequently, environmental blackbody radiation (BBR) can couple Rydberg states together at $μ$s timescales. Here, we track the BBR-induced transfer of a prepared Rydberg state to its neighbors and use the evolution of these state populations to characterize the BBR field at the relevant wavelengths, primarily at 130 GHz. We use selective field ionization readout of Rydberg states with principal quantum number $n\sim30$ in $^{85}$Rb and substantiate our ionization signal with a theoretical model. With this detection method, we measure the associated blackbody-radiation-induced time dynamics of these states, reproduce the results with a simple semi-classical population transfer model, and demonstrate that this measurement is temperature sensitive with a statistical sensitivity to the fractional temperature uncertainty of 0.09 Hz$^{-1/2}$, corresponding to 26 K$\cdot$Hz$^{-1/2}$ at room temperature. This represents a calibration-free SI-traceable temperature measurement, for which we calculate a systematic fractional temperature uncertainty of 0.006, corresponding to 2 K at room temperature when used as a primary temperature standard. △ Less

Submitted 15 October, 2024; v1 submitted 15 October, 2024; originally announced October 2024.

Multichannel, ultra-wideband Rydberg Electrometry with an Optical Frequency Comb

Authors: Nikunjkumar Prajapati, David A. Long, Alexandra B. Artusio-Glimpse, Sean M. Bresler, Christopher L. Holloway

Abstract: While Rydberg atoms have shown tremendous potential to serve as accurate and sensitive detectors of microwaves and millimeter waves, their response is generally limited to a single narrow frequency band around a chosen microwave transition. As a result, their potential to serve as agile and wideband electromagnetic receivers has not been fully realized. Here we demonstrate the use of a mid-infrare… ▽ More While Rydberg atoms have shown tremendous potential to serve as accurate and sensitive detectors of microwaves and millimeter waves, their response is generally limited to a single narrow frequency band around a chosen microwave transition. As a result, their potential to serve as agile and wideband electromagnetic receivers has not been fully realized. Here we demonstrate the use of a mid-infrared, frequency agile optical frequency comb as the coupling laser for three-photon Rydberg atom electrometry. This approach allows us to simultaneously prepare as many as seven individual Rydberg states, allowing for multichannel detection across a frequency range from 1 GHz to 40 GHz. The generality and flexibility of this method for wideband multiplexing is anticipated to have transformative effects in the field of Rydberg electrometry, paving the way for advanced information coding and arbitrary signal detection. △ Less

Submitted 9 September, 2024; originally announced September 2024.

Comments: 13 pages, 4 figures, Rydberg atoms, electrometry, broadband, frequency comb

Revisiting collisional broadening of $^{85}$Rb Rydberg levels: conclusions for vapor cell manufacture

Authors: Mingxin Lei, Stephen P. Eckel, Eric B. Norrgard, Nikunjkumar Prajapati, Alexandra B. Artusio-Glimpse, Matthew T. Simons, Christopher L. Holloway

Abstract: Electrometry based on electromagnetically induced transparency (EIT) in alkali Rydberg vapor cells may suffer reduced sensitivity due to spurious line broadening effects, caused by surface charges, contaminant gases, or other manufacturing defects. In order to draw conclusions about the deleterious effects of potential contaminant gases inside Rydberg electrometry vapor cells, we revisit collision… ▽ More Electrometry based on electromagnetically induced transparency (EIT) in alkali Rydberg vapor cells may suffer reduced sensitivity due to spurious line broadening effects, caused by surface charges, contaminant gases, or other manufacturing defects. In order to draw conclusions about the deleterious effects of potential contaminant gases inside Rydberg electrometry vapor cells, we revisit collisional broadening and shifts of both the D$_2$ line and Rydberg levels of rubidium. Specifically, we measure the broadening and shifts of the $5{\rm S}_{1/2}\rightarrow 5{\rm P}_{3/2}$ (i.e., the D$_2$ line) and $5{\rm S}_{1/2}\rightarrow 5{\rm P}_{3/2}\rightarrow (25{\rm D},27{\rm S},30{\rm D},32{\rm S},35{\rm D},37{\rm S})$ transitions of $^{85}$Rb due to He, Ne, N$_2$ and Ar. By combining these measurements with observations of velocity changing collisions in the sub-Doppler spectrum of the D$_2$ line, we conclude the following: (1) that contaminant gases are most likely not the cause of irregular line shapes or shifts of Rydberg transitions due to the high pressures required, and (2) the sub-Doppler spectrum of the D$_2$ line, through its accompanying loss of contrast at high pressures, can validate that a vapor cell is sufficiently free of contaminant gas for EIT electrometry. We use the theory of Omont, J. Phys. France 38, 1343 (1977), to extend our results to a wide variety of possible contaminant gases and further derive scaling laws applicable to all gases. △ Less

Submitted 29 August, 2024; originally announced August 2024.

Comments: 10 pages, 6 figures, 3 tables

Observation of Asymmetric Sideband Generation in Strongly-driven Rydberg Atoms

Authors: Dangka Shylla, Nikunjkumar Prajapati, Andrew P. Rotunno, Noah Schlossberger, Dixith Manchaiah, William J. Watterson, Alexandra Artusio-Glimpse, Samuel Berweger, Matthew T. Simons, Christopher L. Holloway

Abstract: Improving the bandwidth of Rydberg atom-based receivers is an ongoing challenge owing to the long-lived Rydberg state lifetimes that limit the refresh rate of ground state atoms. In particular, the LO-based Rydberg mixer approach allows for bandwidths into the few-MHz range. Here, we use heterodyne detection of the Rydberg atom receiver probe laser to separate the negative and positive sidebands t… ▽ More Improving the bandwidth of Rydberg atom-based receivers is an ongoing challenge owing to the long-lived Rydberg state lifetimes that limit the refresh rate of ground state atoms. In particular, the LO-based Rydberg mixer approach allows for bandwidths into the few-MHz range. Here, we use heterodyne detection of the Rydberg atom receiver probe laser to separate the negative and positive sidebands that originate from distinct six wave mixing processes, in order to investigate their individual bandwidths. We experimentally confirm the prediction that the negative sideband exhibits a higher bandwidth than the positive sideband. We further explore the effect of coupling and probe laser Rabi frequency on the bandwidth, which we find to be in good agreement with our model. We achieved a maximum experimental (and theoretical) bandwidth of about 11 (11) MHz and 3.5 (5) MHz for the negative and positive sidebands, respectively, from the -3dB roll-off point for optimized field parameters. This work provides insight into the bandwidth-limiting features of Rydberg atom receivers and points the way towards further optimization of their response. △ Less

Submitted 20 August, 2024; originally announced August 2024.

Increased instantaneous bandwidth of Rydberg atom electrometry with an optical frequency comb probe

Authors: Alexandra B. Artusio-Glimpse, David A. Long, Sean M. Bresler, Nikunjkumar Prajapati, Dangka Shylla, Andrew P. Rotunno, Matthew T. Simons, Samuel Berweger, Noah Schlossberger, Thomas W. LeBrun, Christopher L. Holloway

Abstract: We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry. We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Independent Rydberg Atom Sensing using a Dual-Ladder Scheme

Authors: Samuel Berweger, Alexandra B. Artusio-Glimpse, Nikunjkumar Prajapati, Andrew P. Rotunno, Noah Schlossberger, Dangka Shylla, Kaitlin R. Moore, Matthew T. Simons, Christopher L. Holloway

Abstract: Rydberg atom-based electric field sensing can provide all-optical readout of radio frequency fields in a dielectric environment. However, because a single set of optical fields is typically used to prepare the Rydberg state and read out its response to RF fields, it is challenging to perform simultaneous and independent measurements of the RF field(s). Here we show that using two independent schem… ▽ More Rydberg atom-based electric field sensing can provide all-optical readout of radio frequency fields in a dielectric environment. However, because a single set of optical fields is typically used to prepare the Rydberg state and read out its response to RF fields, it is challenging to perform simultaneous and independent measurements of the RF field(s). Here we show that using two independent schemes to prepare and read out the same Rydberg state can be used to perform independent measurements in general, which we demonstrate specifically by resolving the the RF polarization. We expect this work will be useful for fiber-coupled sensor heads where spatial multiplexing is challenging, as well as for complex multi-level sensing schemes. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Investigation of fluorescence versus transmission readout for three-photon Rydberg excitation used in electrometry

Authors: Nikunjkumar Prajapati, Samuel Berweger, Andrew P. Rotunno, Alexandra B. Artusio-Glimpse, Noah Schlossberger, Dangka Shylla, William J. Watterson, Matthew T. Simons, David LaMantia, Eric B. Norrgard, Stephen P. Eckel, Christopher L. Holloway

Abstract: We present a three-photon based fluorescence readout method where the strength of the fluorescence scales with the strength of the radio-frequency (RF) field being applied. We compare this method to conventional three-photon electromagnetically-induced transparency (EIT) and electromagnetically-induced absorption (EIA). Our demonstrated EIA/EIT sensitivity in the collinear three-photon Cesium syst… ▽ More We present a three-photon based fluorescence readout method where the strength of the fluorescence scales with the strength of the radio-frequency (RF) field being applied. We compare this method to conventional three-photon electromagnetically-induced transparency (EIT) and electromagnetically-induced absorption (EIA). Our demonstrated EIA/EIT sensitivity in the collinear three-photon Cesium system is the best reported to date at roughly 30 uVm^{-1}Hz^{-1/2}. The fluorescence is nearly 4 fold better in sensitivity compared to EIA/EIT readout. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 9 figure, quantum optics, rydberg electrometry

Zeeman-resolved Autler-Townes splitting in Rydberg atoms with tunable resonances and a single transition dipole moment

Authors: Noah Schlossberger, Andrew P. Rotunno, Aly Artusio-Glimpse, Nikunjkumar Prajapati, Samuel Berweger, Dangka Shylla, Matthew T. Simons, Christopher L. Holloway

Abstract: Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In this paper we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic fie… ▽ More Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In this paper we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic field provides a well-defined quantization axis regardless of the optical field polarizations, we demonstrate that by separating the $m_J$ levels of the Rydberg state we can perform an Autler-Townes splitting with a single participating dipole moment, and we demonstrate recovery of signal strength by populating a single $m_J$ level using circularly polarized light. △ Less

Submitted 27 November, 2023; v1 submitted 13 November, 2023; originally announced November 2023.

High angular momentum coupling for enhanced Rydberg-atom sensing in the VHF band

Authors: Nikunjkumar Prajapati, Jakob W. Kunzler, Alexandra B. Artusio-Glimpse, Andrew Rotunno, Samuel Berweger, Matthew T. Simons, Christopher L. Holloway, Chad M. Gardner, Michael S. Mcbeth, Robert A. Younts

Abstract: Recent advances in Rydberg atom electrometry detail promising applications in radio frequency (RF) communications. Presently, most applications use carrier frequencies greater than 1~GHz where resonant Autler-Townes splitting provides the highest sensitivity. This letter documents a series of experiments with Rydberg atomic sensors to collect and process waveforms from the automated identification… ▽ More Recent advances in Rydberg atom electrometry detail promising applications in radio frequency (RF) communications. Presently, most applications use carrier frequencies greater than 1~GHz where resonant Autler-Townes splitting provides the highest sensitivity. This letter documents a series of experiments with Rydberg atomic sensors to collect and process waveforms from the automated identification system (AIS) used in maritime navigation in the Very High Frequency (VHF) band. Detection in this band is difficult with conventional resonant Autler-Townes based Rydberg sensing and requires a new approach. We show the results from a new method called High Angular Momentum Matching Excited Raman (HAMMER), which enhances low frequency detection and exhibits superior sensitivity compared to the traditional AC Stark effect. From measurements of electromagnetically induced transparency (EIT) in rubidium and cesium vapor cells, we show the relationship between incident electric field strength and observed signal-to-noise ratio and find that the sensitivity of the HAMMER scheme in rubidium achieved an equivalent single VHF tone sensitivity of $\mathrm{100~μV/m/\sqrt{Hz}}$. With these results, we estimate the usable range of the atomic vapor cell antenna for AIS waveforms given current technology and detection techniques. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Comments: 9 figure, 8 pages

EIT spectra of Rydberg atoms dressed with dual-tone radio-frequency fields

Authors: Maitreyi Jayaseelan, Andrew P. Rotunno, Nikunjkumar Prajapati, Samuel Berweger, Alexandra B. Artusio-Glimpse, Matthew T. Simons, Christopher L. Holloway

Abstract: We examine spectral signatures of Rydberg atoms driven with near-resonant dual-tone radio-frequency (RF) fields in the regime of strong driving. We experimentally demonstrate and theoretically model a variety of nonlinear and multiphoton phenomena in the atomic Rydberg response that manifest in the EIT spectra. Our results echo previous studies of two-level atoms driven with bichromatic optical fi… ▽ More We examine spectral signatures of Rydberg atoms driven with near-resonant dual-tone radio-frequency (RF) fields in the regime of strong driving. We experimentally demonstrate and theoretically model a variety of nonlinear and multiphoton phenomena in the atomic Rydberg response that manifest in the EIT spectra. Our results echo previous studies of two-level atoms driven with bichromatic optical fields. In comparison to the optical studies, the RF-driven Rydberg system utilizes a more complex excitation pathway, and electromagnetic fields from two different spectral regimes: a two-photon optical excitation continuously creates highly excited Rydberg atoms, while RF fields drive resonant coupling between the Rydberg levels and generate strong mixing. Yet, our spectra reflect nearly identical effects of the dual-tone RF fields on the atomic Rydberg observables, showing detuning-dependent splittings and Rabi frequency dependent peak numbers and relative strengths, and avoided crossings at subharmonic resonances. We thus validate previous two-state models in this more complex physical system. In the context of Rydberg electrometry, we use these investigations to explore a technique where we tune a known RF field to observe spectra which give frequency and power of an unknown RF field using the complex dual-tone spectra. △ Less

Submitted 16 May, 2023; originally announced May 2023.

Inverse Transform Sampling for Efficient Doppler-Averaged Spectroscopy Simulations

Authors: Andrew P. Rotunno, Amy K. Robinson, Nikunjkumar Prajapati, Samuel Berweger, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway

Abstract: We present a thermal velocity sampling method for calculating Doppler-broadened atomic spectra, which more efficiently reaches a smooth limit than regular velocity weighted sampling. The method uses equal-population sampling of the 1-D thermal distribution, sampling the 'inverse transform' of the cumulative distribution function, and is broadly applicable to normal distributions. We also discuss e… ▽ More We present a thermal velocity sampling method for calculating Doppler-broadened atomic spectra, which more efficiently reaches a smooth limit than regular velocity weighted sampling. The method uses equal-population sampling of the 1-D thermal distribution, sampling the 'inverse transform' of the cumulative distribution function, and is broadly applicable to normal distributions. We also discuss efficiencies from eliminating velocity classes which don't significantly contribute to observed atomic lines, and comment on the application of this method in 2- and 3-dimensions. △ Less

Submitted 24 April, 2023; originally announced April 2023.

Comments: 8 pages, 7 figures. Code and data will be available with final publication

Journal ref: AIP Advances 13, 075218 (2023)

Detection of HF and VHF Fields through Floquet Sideband Gaps by `Rabi Matching' Dressed Rydberg Atoms

Authors: Andrew P. Rotunno, Samuel Berweger, Nikunjkumar Prajapati, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway, Maitreyi Jayaseelan, Robert M. Potvliege, C. S. Adams

Abstract: Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency (RF) carriers in the HF and VHF bands via a controlled Autler-Townes line splitting. Using a resonant, high-frequency (GHz) RF fie… ▽ More Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency (RF) carriers in the HF and VHF bands via a controlled Autler-Townes line splitting. Using a resonant, high-frequency (GHz) RF field, the absorption signal from Townes-Merrit sidebands created by a low frequency, non-resonant RF field can be enhanced. Notably, this technique uses a measurement of the optical frequency separation of an avoided crossing to determine the amplitude of a non-resonant, low frequency RF field. This technique also provides frequency-selective measurements of low frequency RF electric fields. To show this, we demonstrate amplitude modulated signal transduction on a low frequency VHF carrier. We further demonstrate reception of multiple tones simultaneously, creating a Rydberg `spectrum analyzer' over the VHF range. △ Less

Submitted 21 April, 2023; v1 submitted 6 December, 2022; originally announced December 2022.

Comments: Data for figures can be found at: https://datapub.nist.gov/od/id/mds2-2852

Journal ref: J. Appl. Phys. 134, 134501 (2023)

Phase-Resolved Rydberg Atom Field Sensing using Quantum Interferometry

Authors: Samuel Berweger, Alexandra B. Artusio-Glimpse, Andrew P. Rotunno, Nikunjkumar Prajapati, Joseph D. Christesen, Kaitlin R. Moore, Matthew T. Simons, Christopher L. Holloway

Abstract: Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate that closed-loop quantum interferometric schemes can be used to generate a system-internal reference that can directly replace an external LO for Rydbe… ▽ More Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate that closed-loop quantum interferometric schemes can be used to generate a system-internal reference that can directly replace an external LO for Rydberg field sensing. We reveal that this quantum-interferometrically defined internal reference phase and frequency can be used analogously to a traditional LO for atom-based down-mixing to an intermediate frequency for lock-in phase detection. We demonstrate that this LO-equivalent functionality provides analogous benefits to an LO, including full 360$^\circ$ phase resolution as well as improved sensitivity. The general applicability of this approach is confirmed by demodulating a four phase-state signal broadcast on the atoms. Our approach opens up new sensing schemes and provides a clear path towards all-optical Rydberg atom sensing implementations. △ Less

Submitted 28 July, 2023; v1 submitted 30 November, 2022; originally announced December 2022.

Sensitivity Comparison of Two-photon vs Three-photon Rydberg Electrometry

Authors: Nikunjkumar Prajapati, Narayan Bhusal, Andrew P. Rotunno, Samuel Berweger, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Ying Ju Wang, Eric Bottomley, Haoquan Fan, Christopher L. Holloway

Abstract: We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best r… ▽ More We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best relate to the operation of the current best experimental implementation based on shot noise limited detection. We find that the three-photon system boasts much narrower line widths compared to the conventional two-photon EIT. However, these narrow line features do not align with the regions of the best sensitivity. In addition to this, we calculate the expected sensitivity for the two-photon Rydberg sensor and find that the best achievable sensitivity is over an order of magnitude better than the current measured values of 5 uV/m/Hz. However, by accounting for the additional noise sources in the experiment and the quantum efficiency of the photo-detectors, the values are in good agreement. △ Less

Submitted 23 November, 2022; v1 submitted 21 November, 2022; originally announced November 2022.

Comments: 9 pages, 6 figures

Rydberg state engineering: A comparison of tuning schemes for continuous frequency sensing

Authors: Samuel Berweger, Nikunjkumar Prajapati, Alexandra B. Artusio-Glimpse, Andrew P. Rotunno, Roger Brown, Christopher L. Holloway, Matthew T. Simons, Eric Imhof, Steven R. Jefferts, Baran N. Kayim, Michael A. Viray, Robert Wyllie, Brian C. Sawyer, Thad G. Walker

Abstract: On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use of an additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonant sensing.… ▽ More On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use of an additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonant sensing. Here we investigate three distinct tuning level schemes based on adjacent Rydberg transitions, which are shown to have distinct characteristics and can be controlled with mechanisms based on the tuning field frequency or field strength. We further show that a two-photon Raman feature can be used as an effective tuning mechanism separate from conventional Autler-Townes splitting. We compare our tuning schemes to AC Stark effect-based broadband RF field sensing and show that although the sensitivity is diminished as we tune away from a resonant state, it nevertheless can be used in configurations where there is a low density of Rydberg states, which would result in a weak AC Stark effect. △ Less

Submitted 28 September, 2022; originally announced September 2022.

Modeling Line Broadening and Distortion Due to Spatially Non-Uniform Fields in Rydberg Electrometry

Authors: Andrew P. Rotunno, Amy K. Robinson, Samuel Berweger, Nukunjkumar Prajapati, Alexandra B. Artusio-Glimpse, Matthew Simons, Christopher L. Holloway

Abstract: We present a model for calculating broadened Autler-Townes spectra when probing ac electric field magnitudes by use of Rydberg atom electromagnetically-induced transparency. This model approximates the atom vapor as a multi-layered media and uses Beer's law to combine probe beam absorption through many discrete thin segments, replicating the broadening seen in experimental measurements. The method… ▽ More We present a model for calculating broadened Autler-Townes spectra when probing ac electric field magnitudes by use of Rydberg atom electromagnetically-induced transparency. This model approximates the atom vapor as a multi-layered media and uses Beer's law to combine probe beam absorption through many discrete thin segments, replicating the broadening seen in experimental measurements. The methodology can be easily applied to other non-uniform optical parameters when monitoring total spectral transmission or phase delay. Field non-uniformity is present in standing waves of unmatched waveguides and glass vapor cells, which are generally due to source characteristics and environmental reflections. We present broadening and distortion effects caused by various types of electric-field distributions, and compare this model to results obtained from measured atomic spectra. △ Less

Submitted 15 August, 2022; originally announced August 2022.

Comments: 8 pages, 6 figures

Journal ref: J. Appl. Phys. 134, 084401 (2023)

TV and Video Game Streaming with a Quantum Receiver: A Study on a Rydberg atom-based receivers bandwidth and reception clarity

Authors: Nikunjkumar Prajapati, Andrew Rotunno, Samuel Berweger, Matt Simons, Aly Artusio-Glimpse, Christopher L. Holloway

Abstract: We demonstrate the ability to receive live color analog television and video game signals with the use of the Rydberg atom receiver. The typical signal expected for traditional 480i NSTC format video signals requires a bandwidth of over 3 MHz. We determine the beam sizes, powers, and detection method required for the Rydberg atoms to receive this type of signal. The beam size affects the average t… ▽ More We demonstrate the ability to receive live color analog television and video game signals with the use of the Rydberg atom receiver. The typical signal expected for traditional 480i NSTC format video signals requires a bandwidth of over 3 MHz. We determine the beam sizes, powers, and detection method required for the Rydberg atoms to receive this type of signal. The beam size affects the average time the atoms remain in the interaction volume, which is inversely proportional to the bandwidth of the receiver. We find that small beam diameters (less than 100 μm) lead to much faster responses and allow for color reception. We demonstrate the effect of beam size on bandwidth by receiving a live 480i video stream with the Rydberg atom receiver. The best fidelity was achieved with a beam width of 85 μm full-width at half-max. △ Less

Submitted 11 May, 2022; v1 submitted 5 May, 2022; originally announced May 2022.

Comments: 6 pages, 7 figures

Rydberg atom-based field sensing enhancement using a split-ring resonator

Authors: Christopher L. Holloway, Nikunjkumar Prajapati, Alexandra B. Artusio-Glimpse, Samuel Berweger, Yoshiaki Kasahara, Andrea Alu, Richard W. Ziolkowski

Abstract: We investigate the use of a split-ring resonator (SRR) incorporated with an atomic-vapor cell to improve the sensitivity and the minimal detectable electric (E) field of Rydberg atom-based sensors. In this approach, a sub-wavelength SRR is placed around an atomic vapor-cell filled with cesium atoms for E-field measurements at 1.3~GHz. The SRR provides a factor of 100 in the enhancement of the E-fi… ▽ More We investigate the use of a split-ring resonator (SRR) incorporated with an atomic-vapor cell to improve the sensitivity and the minimal detectable electric (E) field of Rydberg atom-based sensors. In this approach, a sub-wavelength SRR is placed around an atomic vapor-cell filled with cesium atoms for E-field measurements at 1.3~GHz. The SRR provides a factor of 100 in the enhancement of the E-field measurement sensitivity. Using electromagnetically induced transparency (EIT) with Aulter-Townes splitting, E-field measurements down to 5~mV/m are demonstrated with the SRR, while in the absence of the SRR, the minimal detectable field is 500~mV/m. We demonstrate that by combining EIT with a heterodyne Rydberg atom-based mixer approach, the SRR allows for the a sensitivity of 5.5~$μ$V/m$\sqrt{\rm Hz}$, which is two-orders of magnitude improvement in sensitivity than when the SRR is not used. △ Less

Submitted 17 February, 2022; originally announced February 2022.

Comments: 5 pages, 6 figures

Electromagnetically induced transparency based Rydberg-atom sensor for quantum voltage measurements

Authors: Christopher L. Holloway, Nikunjkumar Prajapati, John Kitching, Jeffery A. Sherman, Carson Teale, Alain Rufenacht, Alexandra B. Artusio-Glimpse, Matthew T. Simons, Amy K. Robinson, Eric B. Norrgard

Abstract: We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow… ▽ More We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow for dc and ac voltage measurements ranging from 0~V to 12~V. A Rydberg atom-based voltage standard could become an alternative calibration method with more favorable size, weight, power consumption, and cost compared to the more precise Josephson voltage standard. In this study, we also demonstrate how the voltage measurements can be utilized to determine the atomic polarizability for the Rydberg states. The Rydberg atom-based voltage measurement technology would become a complimentary method for dissemination of the voltage scale directly to the end user. △ Less

Submitted 22 October, 2021; v1 submitted 5 October, 2021; originally announced October 2021.

Comments: 13 pages, 14 figures, 3 tables

Enhancement of electromagnetically induced transparency based Rydberg-atom electrometry through population repumping

Authors: Nikunjkumar Prajapati, Amy K. Robinson, Samuel Berweger, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway

Abstract: We demonstrate improved sensitivity of Rydberg electrometry based on electromagnetically induced transparency (EIT) with a ground state repumping laser. Though there are many factors that limit the sensitivity of radio frequency field measurements, we show that repumping can enhance the interaction strength while avoiding additional Doppler or power broadening. Through this method, we nearly doubl… ▽ More We demonstrate improved sensitivity of Rydberg electrometry based on electromagnetically induced transparency (EIT) with a ground state repumping laser. Though there are many factors that limit the sensitivity of radio frequency field measurements, we show that repumping can enhance the interaction strength while avoiding additional Doppler or power broadening. Through this method, we nearly double the EIT amplitude without an increase in the width of the peak. A similar increase in amplitude without the repumping field is not possible through simple optimization.We also establish that one of the key limits to detection is the photon shot noise of the probe laser. We show an improvement on the sensitivity of the device by a factor of nearly 2 in the presence of the repump field. △ Less

Submitted 30 August, 2021; originally announced August 2021.

Comments: 5 pages, 6 figures

Continuous radio frequency electric-field detection through adjacent Rydberg resonance tuning

Authors: Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway, Eric Imhof, Steven R. Jefferts, Robert Wyllie, Brian C. Sawyer, Thad G Walker

Abstract: We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydber… ▽ More We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydberg transition, far-detuned fields can be detected through a two-photon resonance AT splitting. This two-photon AT splitting method is several orders of magnitude more sensitive than off-resonant detection using the Stark shift. We present the results of various experimental configurations and a theoretical analysis to illustrate the effectiveness of this multiple level scheme. These results show that this approach allows for the detection of frequencies in continuous band between resonances with adjacent Rydberg states. △ Less

Submitted 21 May, 2021; originally announced May 2021.

Journal ref: Phys. Rev. A 104, 032824 (2021)

Determining the Angle-of-Arrival of an Radio-Frequency Source with a Rydberg Atom-Based Sensor

Authors: Amy K. Robinson, Nikunjkumar Prajapati, Damir Senic, Matthew T. Simons, Joshua A. Gordon, Christopher L. Holloway

Abstract: In this work, we demonstrate the use of a Rydberg atom-based sensor for determining the angle-of-arrival of an incident radio-frequency (RF) wave or signal. The technique uses electromagnetically induced transparency in Rydberg atomic vapor in conjunction with a heterodyne Rydberg atom-based mixer. The Rydberg atom mixer measures the phase of the incident RF wave at two different locations inside… ▽ More In this work, we demonstrate the use of a Rydberg atom-based sensor for determining the angle-of-arrival of an incident radio-frequency (RF) wave or signal. The technique uses electromagnetically induced transparency in Rydberg atomic vapor in conjunction with a heterodyne Rydberg atom-based mixer. The Rydberg atom mixer measures the phase of the incident RF wave at two different locations inside an atomic vapor cell. The phase difference at these two locations is related to the direction of arrival of the incident RF wave. To demonstrate this approach, we measure phase differences of an incident 19.18 GHz wave at two locations inside a vapor cell filled with cesium atoms for various incident angles. Comparisons of these measurements to both full-wave simulation and to a plane-wave theoretical model show that these atom-based sub-wavelength phase measurements can be used to determine the angle-of-arrival of an RF field. △ Less

Submitted 28 January, 2021; originally announced January 2021.

Comments: 4 pages, 5 figures

Blackbody Radiation Noise Broadening of Quantum Systems

Authors: Eric B Norrgard, Stephen P Eckel, Christopher L Holloway, Eric L Shirley

Abstract: Precision measurements of quantum systems often seek to probe or must account for the interaction with blackbody radiation. Over the past several decades, much attention has been given to AC Stark shifts and stimulated state transfer. For a blackbody in thermodynamic equilibrium, these two effects are determined by the expectation value of photon number in each mode of the Planck spectrum. Here, w… ▽ More Precision measurements of quantum systems often seek to probe or must account for the interaction with blackbody radiation. Over the past several decades, much attention has been given to AC Stark shifts and stimulated state transfer. For a blackbody in thermodynamic equilibrium, these two effects are determined by the expectation value of photon number in each mode of the Planck spectrum. Here, we explore how the photon number variance of an equilibrium blackbody generally leads to a parametric broadening of the energy levels of quantum systems that is inversely proportional to the square-root of the blackbody volume. We consider the the effect in two cases which are potentially highly sensitive to this broadening: Rydberg atoms and atomic clocks. We find that even in blackbody volumes as small as 1\,cm$^3$, this effect is unlikely to contribute meaningfully to transition linewidths. △ Less

Submitted 8 January, 2021; originally announced January 2021.

Journal ref: Phys. Rev. A 103, 042806 (2021)

Quantum Blackbody Thermometry

Authors: Eric B. Norrgard, Stephen P. Eckel, Christopher L. Holloway, Eric L. Shirley

Abstract: Blackbody radiation (BBR) sources are calculable radiation sources that are frequently used in radiometry, temperature dissemination, and remote sensing. Despite their ubiquity, blackbody sources and radiometers have a plethora of systematics. We envision a new, primary route to measuring blackbody radiation using ensembles of polarizable quantum systems, such as Rydberg atoms and diatomic molecul… ▽ More Blackbody radiation (BBR) sources are calculable radiation sources that are frequently used in radiometry, temperature dissemination, and remote sensing. Despite their ubiquity, blackbody sources and radiometers have a plethora of systematics. We envision a new, primary route to measuring blackbody radiation using ensembles of polarizable quantum systems, such as Rydberg atoms and diatomic molecules. Quantum measurements with these exquisite electric field sensors could enable active feedback, improved design, and, ultimately, lower radiometric and thermal uncertainties of blackbody standards. A portable, calibration-free Rydberg-atom physics package could also complement a variety of classical radiation detector and thermometers. The successful merger of quantum and blackbody-based measurements provides a new, fundamental paradigm for blackbody physics. △ Less

Submitted 9 January, 2021; v1 submitted 12 November, 2020; originally announced November 2020.

Quantum Physics Meets Music: A "Real-Time" Guitar Recording Using Rydberg-Atoms and Electromagnetically Induced Transparency

Authors: Christopher L. Holloway, Matthew T. Simons, Abdulaziz H. Haddab, Carl J. Williams, Maxwell W. Holloway

Abstract: We demonstrate how Rydberg atoms and the phenomena of electromagnetically induced transparency can be used to aid in the recording of a musical instrument in real time as it is played. Also, by using two different atomic species (cesium and rubidium) in the same vapor cell, we demonstrate the ability to record two guitars simultaneously, where each atomic species detects and allows for the recordi… ▽ More We demonstrate how Rydberg atoms and the phenomena of electromagnetically induced transparency can be used to aid in the recording of a musical instrument in real time as it is played. Also, by using two different atomic species (cesium and rubidium) in the same vapor cell, we demonstrate the ability to record two guitars simultaneously, where each atomic species detects and allows for the recording of each guitar separately. The approach shows how audio data (the musical composition) can be detected with a quantum system, illustrating how we can control ensembles of atoms to such an extent that we can use them in this "entertaining" example of recording a musical instrument. △ Less

Submitted 1 April, 2019; originally announced April 2019.

Comments: 5 page, 4 figures. arXiv admin note: substantial text overlap with arXiv:1903.00786

Journal ref: AIP Advances 9, 065110 (2019)

Detecting and Receiving Phase Modulated Signals with a Rydberg Atom-Based Mixer

Authors: Christopher L. Holloway, Matthew T. Simons, Joshua A. Gordon, David Novotny

Abstract: Recently, we introduced a Rydberg-atom based mixer capable of detecting and measuring the phase of a radio-frequency field through the electromagnetically induced transparency (EIT) and Autler-Townes (AT) effect. The ability to measure phase with this mixer allows for an atom-based receiver to detect digital modulated communication signals. In this paper, we demonstrate detection and reception of… ▽ More Recently, we introduced a Rydberg-atom based mixer capable of detecting and measuring the phase of a radio-frequency field through the electromagnetically induced transparency (EIT) and Autler-Townes (AT) effect. The ability to measure phase with this mixer allows for an atom-based receiver to detect digital modulated communication signals. In this paper, we demonstrate detection and reception of digital modulated signals based on various phase-shift keying approaches. We demonstrate Rydberg atom-based digital reception of binary phase-shift keying (BPSK), quadrature phase-shift keying (QPSK), and quadrature amplitude (QAM) modulated signals over a 19.626~GHz carrier to transmit and receive a bit stream in cesium vapor. We present measured values of Error Vector Magnitude (EVM, a common communication metric used to assess how accurate a symbol or bit stream is received) as a function of symbol rate for BPSK, QPSK, 16QAM, 32QAM, and 64QAM modulation schemes. These results allow us to discuss the bandwidth of a Rydberg-atom based receiver system. △ Less

Submitted 25 March, 2019; originally announced March 2019.

Comments: 5 pages, 6 figures,

Weak Electric-Field Detection with Sub-1 Hz Resolution at Radio Frequencies Using A Rydberg Atom-Based Mixer

Authors: Joshua A. Gordon, Matthew T. Simons, Abdulaziz H. Haddab, Christopher L. Holloway

Abstract: Rydberg atoms have been used for measuring radio-frequency (RF) electric (E)-fields due to their strong dipole moments over the frequency range of 500 MHz-1 THz. For this, electromagnetically induced transparency (EIT) within the Autler-Townes (AT) regime is used such that the detected E-field is proportional to AT splitting. However, for weak E-fields AT peak separation becomes unresolvable thus… ▽ More Rydberg atoms have been used for measuring radio-frequency (RF) electric (E)-fields due to their strong dipole moments over the frequency range of 500 MHz-1 THz. For this, electromagnetically induced transparency (EIT) within the Autler-Townes (AT) regime is used such that the detected E-field is proportional to AT splitting. However, for weak E-fields AT peak separation becomes unresolvable thus limiting the minimum detectable E-field. Here, we demonstrate using the Rydberg atoms as an RF mixer for weak E-field detection well below the AT regime with frequency discrimination better than 1 Hz resolution. Two E-fields incident on a vapor cell filled with cesium atoms are used. One E-field at 19.626000 GHz drives the 34D_(5/2)->5P_(3/2) Rydberg transition and acts as a local oscillator (LO) and a second signal E-field (Sig) of interest is at 19.626090 GHz. In the presence of the LO, the Rydberg atoms naturally down convert the Sig field to a 90 kHz intermediate frequency (IF) signal. This IF signal manifests as an oscillation in the probe laser intensity through the Rydberg vapor and is easily detected with a photodiode and lock-in amplifier. In the configuration used here, E-field strength down to ? 46 mV/m +/-2 mV/m were detected. Furthermore, neighboring fields 0.1 Hz away and equal in strength to Sig could be discriminated without any leakage into the lock-in signal. For signals 1 Hz away and as high as +60 dB above Sig, leakage into the lock-in signal could be kept below -3 dB. △ Less

Submitted 22 March, 2019; originally announced March 2019.

A Multiple-Band Rydberg-Atom Based Receiver/Antenna: AM/FM Stereo Reception

Authors: Christopher L. Holloway, Matthew T. Simons, Abdulaziz H. Haddab, Joshua A. Gordon, Stephen D. Voran

Abstract: With the re-definition of the International System of Units (SI) that occurred in October of 2018, there has recently been a great deal of attention on the development of atom-based sensors for metrology applications. In particular, great progress has been made in using Rydberg-atom based techniques for electric (E) field metrology. These Rydberg-atom based E-field sensors have made it possible to… ▽ More With the re-definition of the International System of Units (SI) that occurred in October of 2018, there has recently been a great deal of attention on the development of atom-based sensors for metrology applications. In particular, great progress has been made in using Rydberg-atom based techniques for electric (E) field metrology. These Rydberg-atom based E-field sensors have made it possible to develop atom-based receivers and antennas, which potentially have many benefits over conventional technologies in detecting and receiving modulated signals. In this paper, we demonstrate the ``first'' multi-channel atom-based reception of both amplitude (AM) and frequency (FM) modulation signals. We demonstrate this by using two different atomic species in order to detect and receive AM and FM modulated signals in stereo. Also, in this paper we investigate the effect of Gaussian noise on the ability to receive AM/FM signals. These results illustrate the multi-band (or multi-channel) receiving capability of a atom-based receiver/antenna to produce high fidelity stereo reception from both AM and FM signals. This paper shows an interesting way of applying the relatively newer (and something esoteric) field of quantum-optics and atomic-physics to the century old topic of radio reception. △ Less

Submitted 2 March, 2019; originally announced March 2019.

Comments: 10 pages, 9 figures, 1 Table, and 32 references

Retrieval Approach for Determining Surface Susceptibilities and Surface Porosities of a Symmetric Metascreen from Reflection and Transmission Coefficients

Authors: Christopher L. Holloway, Edward F. Kuester, Abdulaziz H. Haddab

Abstract: Recently we derived generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen (a metasurface with a ``fishnet'' structure, i.~e., a periodic array of arbitrary spaced apertures in a relatively impenetrable surface). The parameters in these GSTCs are interpreted as effective surface susceptibilities and surface porosities, which themselves are related… ▽ More Recently we derived generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen (a metasurface with a ``fishnet'' structure, i.~e., a periodic array of arbitrary spaced apertures in a relatively impenetrable surface). The parameters in these GSTCs are interpreted as effective surface susceptibilities and surface porosities, which themselves are related to the geometry of the apertures that constitute the metascreen. In this paper, we use these GSTCs to derive the plane-wave reflection ($R$) and transmission ($T$) coefficients of a symmetric metascreen, expressed in terms of these surface parameters. From these equations, we develop a retrieval approach for determining the uniquely defined effective surface susceptibilities and surface porosities that characterize the metascreen from measured or simulated data for the $R$ and $T$ coefficients. We present the retrieved surface parameters for metascreens composed of five different types of apertures (circular holes, square holes, crosses, slots, and a square aperture filled with a high-contrast dielectric). The last example exhibits interesting resonances at frequencies where no resonances exist when the aperture is not filled, which opens up the possibility of designing metasurfaces with unique filtering properties. The retrieved surface parameters are validated by comparing them to other approaches. △ Less

Submitted 22 February, 2019; originally announced February 2019.

Comments: 14 pages, 19 figures, 39 references

A New Quantum-Based Power Standard: Using Rydberg Atoms for a SI-Traceable Radio-Frequency Power Measurement Technique in Rectangular Waveguides

Authors: Christopher L. Holloway, Matthew T. Simons, Marcus D. Kautz, Abdulaziz H. Haddab, Joshua A. Gordon, Thomas P. Crowley

Abstract: In this work we demonstrate an approach for the measurement of radio-frequency (RF) power using electromagnetically induced transparency (EIT) in a Rydberg atomic vapor. This is accomplished by placing alkali atomic vapor in a rectangular waveguide and measuring the electric (E) field strength (utilizing EIT and Autler-Townes splitting) for a wave propagating down the waveguide. The RF power carri… ▽ More In this work we demonstrate an approach for the measurement of radio-frequency (RF) power using electromagnetically induced transparency (EIT) in a Rydberg atomic vapor. This is accomplished by placing alkali atomic vapor in a rectangular waveguide and measuring the electric (E) field strength (utilizing EIT and Autler-Townes splitting) for a wave propagating down the waveguide. The RF power carried by the wave is then related to this measured E-field, which leads to a new direct International System of Units (SI) measurement of RF power. To demonstrate this approach, we first measure the field distribution of the fundamental mode in the waveguide and then measure the power carried by the wave at both 19.629 GHz and 26.526 GHz. We obtain good agreement between the power measurements obtained with this new technique and those obtained with a conventional power meter. △ Less

Submitted 22 June, 2018; v1 submitted 18 June, 2018; originally announced June 2018.

Comments: 4 page, 7 figures

High-resolution antenna near-field imaging and sub-THz measurements with a small atomic vapor-cell sensing element

Authors: David A. Anderson, Eric Paradis, Georg Raithel, Rachel E. Sapiro, Christopher L. Holloway

Abstract: Atomic sensing and measurement of millimeter-wave (mmW) and THz electric fields using quantum-optical EIT spectroscopy of Rydberg states in atomic vapors has garnered significant interest in recent years towards the development of atomic electric-field standards and sensor technologies. Here we describe recent work employing small atomic vapor cell sensing elements for near-field imaging of the ra… ▽ More Atomic sensing and measurement of millimeter-wave (mmW) and THz electric fields using quantum-optical EIT spectroscopy of Rydberg states in atomic vapors has garnered significant interest in recent years towards the development of atomic electric-field standards and sensor technologies. Here we describe recent work employing small atomic vapor cell sensing elements for near-field imaging of the radiation pattern of a K$_u$-band horn antenna at 13.49 GHz. We image fields at a spatial resolution of $λ/10$ and measure over a 72 to 240 V/m field range using off-resonance AC-Stark shifts of a Rydberg resonance. The same atomic sensing element is used to measure sub-THz electric fields at 255 GHz, an increase in mmW-frequency by more than one order of magnitude. The sub-THz field is measured over a continuous $\pm$100 MHz frequency band using a near-resonant mmW atomic transition. △ Less

Submitted 25 April, 2018; originally announced April 2018.

Measurement of Radio-Frequency Radiation Pressure

Authors: Alexandra Artusio-Glimpse, Matt T. Simons, Ivan Ryger, Marc Kautz, John Lehman, Christopher L. Holloway

Abstract: We perform measurements of the radiation pressure of a radio-frequency (RF) electromagnetic field which may lead to a new SI-traceable power calibration. There are several groups around the world investigating methods to perform more direct SI traceable measurement of RF power (where RF is defined to range from 100s of MHz to THz). A measurement of radiation pressure offers the possibility for a p… ▽ More We perform measurements of the radiation pressure of a radio-frequency (RF) electromagnetic field which may lead to a new SI-traceable power calibration. There are several groups around the world investigating methods to perform more direct SI traceable measurement of RF power (where RF is defined to range from 100s of MHz to THz). A measurement of radiation pressure offers the possibility for a power measure traceable to the kilogram and to Planck's constant through the redefined SI. Towards this goal, we demonstrate the ability to measure the radiation pressure/force carried in a field at 15~GHz. △ Less

Submitted 12 February, 2018; originally announced February 2018.

Comments: 2 pages 4 figures

Quantum-optical spectroscopy for plasma electric field measurements and diagnostics

Authors: David A. Anderson, Georg Raithel, Matthew Simons, Christopher L. Holloway

Abstract: Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Methods for non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large field range remain an outstanding challenge. Here, we introduce and demonstrate a new method for plasma electric field measurement that employs electromagneticall… ▽ More Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Methods for non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large field range remain an outstanding challenge. Here, we introduce and demonstrate a new method for plasma electric field measurement that employs electromagnetically induced transparency as a high-resolution quantum-optical probe for the Stark energy level shifts of plasma-embedded Rydberg atoms, which serve as highly-sensitive field sensors with a large dynamic range. The method is applied in diagnostics of plasmas photo-excited out of a cesium vapor. The plasma electric fields are extracted from spatially-resolved measurements of field-induced shape changes and shifts of Rydberg resonances in rubidium tracer atoms. Measurement capabilities over a range of plasma densities and temperatures are exploited to characterize plasmas in applied magnetic fields and to image electric-field distributions in cyclotron-heated plasmas. △ Less

Submitted 23 December, 2017; originally announced December 2017.

Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) splitting in the Presence of Band-Limited White Gaussian Noise

Authors: Christopher L. Holloway, Matthew T. Simons, Marcus D. Kautz, David A. Anderson, Georg Raithel, Daniel Stack, Marc C. St. John, Wansheng Su

Abstract: We investigate the effect of band-limited white Gaussian noise (BLWGN) on electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, when performing atom-based continuous-wave (CW) radio-frequency (RF) electric (E) field strength measurements with Rydberg atoms in an atomic vapor. This EIT/AT-based E-field measurement approach is currently being investigated by several groups… ▽ More We investigate the effect of band-limited white Gaussian noise (BLWGN) on electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, when performing atom-based continuous-wave (CW) radio-frequency (RF) electric (E) field strength measurements with Rydberg atoms in an atomic vapor. This EIT/AT-based E-field measurement approach is currently being investigated by several groups around the world as a means to develop a new SI traceable RF E-field measurement technique. For this to be a useful technique, it is important to understand the influence of BLWGN. We perform EIT/AT based E-field experiments with BLWGN centered on the RF transition frequency and for the BLWGN blue-shifted and red-shifted relative to the RF transition frequency. The EIT signal can be severely distorted for certain noise conditions (band-width, center-frequency, and noise power), hence altering the ability to accurately measure a CW RF E-field strength. We present a model to predict the changes in the EIT signal in the presence of noise. This model includes AC Stark shifts and on resonance transitions associated with the noise source. The results of this model are compared to the experimental data and we find very good agreement between the two. △ Less

Submitted 22 December, 2017; originally announced December 2017.

Comments: 14 page, 15 figures, 1 table

Generalized Sheet Transition Conditions (GSTCs) for a Metascreen -- A Fishnet Metasurface

Authors: Christopher L. Holloway, Edward F. Kuester

Abstract: We used a multiple-scale homogenization method to derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen---a metasurface with a "fishnet" structure. These surfaces are characterized by periodically-spaced arbitrary-shaped apertures in an otherwise relatively impenetrable surface. The parameters in these GSTCs are interpreted as effective su… ▽ More We used a multiple-scale homogenization method to derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metascreen---a metasurface with a "fishnet" structure. These surfaces are characterized by periodically-spaced arbitrary-shaped apertures in an otherwise relatively impenetrable surface. The parameters in these GSTCs are interpreted as effective surface susceptibilities and surface porosities, which are related to the geometry of the apertures that constitute the metascreen. Finally, we emphasize the subtle but important difference between the GSTCs required for metascreens and those required for metafilms (a metasurface with a "cermet" structure, i.e., an array of isolated (non-touching) scatterers). △ Less

Submitted 22 October, 2017; originally announced October 2017.

Comments: 12 pages, 5 Figures

Simultaneous Use of Cs and Rb Rydberg Atoms for Independent RF Electric Field Measurements via Electromagnetically Induced Transparency

Authors: Matt T. Simons, Joshua A. Gordon, Christopher L. Holloway

Abstract: We demonstrate simultaneous electromagnetically-induced transparency (EIT) with cesium (Cs) and rubidium (Rb) Rydberg atoms in the same vapor cell with coincident (overlapping) optical fields. Each atomic system can detect radio frequency (RF) electric (E) field strengths through modification of the EIT signal (Autler-Townes (AT) splitting), which leads to a direct SI traceable RF E-field measurem… ▽ More We demonstrate simultaneous electromagnetically-induced transparency (EIT) with cesium (Cs) and rubidium (Rb) Rydberg atoms in the same vapor cell with coincident (overlapping) optical fields. Each atomic system can detect radio frequency (RF) electric (E) field strengths through modification of the EIT signal (Autler-Townes (AT) splitting), which leads to a direct SI traceable RF E-field measurement. We show that these two systems can detect the same the RF E-field strength simultaneously, which provides a direct in situ comparison of Rb and Cs RF measurements in Rydberg atoms. In effect, this allows us to perform two independent measurements of the same quantity in the same laboratory, providing two different immediate and independent measurements. This gives two measurements that helps rule out systematic effects and uncertainties in this E-field metrology approach, which are important when establishing an international measurement standard for an E-field strength and is a necessary step for this method to be accepted as a standard calibration technique. We use this approach to measure E-fields at 9.2~GHz, 11.6~GHz, and 13.4~GHz, which correspond to three different atomic states (different principal atomic numbers and angular momentums) for the two atom species. △ Less

Submitted 6 July, 2016; originally announced July 2016.

Comments: 10 pages, 13 figures

Journal ref: JOURNAL OF APPLIED PHYSICS 120, 123103 (2016)

A Homogenization Technique for Obtaining Generalized Sheet Transition Conditions (GSTCs) for a Metafilm Embedded in a Magneto-Dielectric Interface

Authors: Christoper L. Holloway, Edward F. Kuester

Abstract: Using the multiple-scale homogenization method, we derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metafilm. The scatterers that compose the metafilm are of arbitrary shape and are embedded between two different magneto-dielectric media. The parameters in these boundary conditions are interpreted as effective electric and magnetic surface susce… ▽ More Using the multiple-scale homogenization method, we derive generalized sheet transition conditions (GSTCs) for electromagnetic fields at the surface of a metafilm. The scatterers that compose the metafilm are of arbitrary shape and are embedded between two different magneto-dielectric media. The parameters in these boundary conditions are interpreted as effective electric and magnetic surface susceptibilities, which themselves are related to the geometry of the scatterers that constitute the metafilm. △ Less

Submitted 16 March, 2016; originally announced March 2016.

Comments: 15 pages, 5 figures

Optical measurements of strong microwave fields with Rydberg atoms in a vapor cell

Authors: David A. Anderson, Stephanie A. Miller, Joshua A. Gordon, Miranda L. Butler, Christopher L. Holloway, Georg Raithel

Abstract: We present a spectral analysis of Rydberg atoms in strong microwave fields using electromagnetically induced transparency (EIT) as an all-optical readout. The measured spectroscopic response enables optical, atom-based electric field measurements of high-power microwaves. In our experiments, microwaves are irradiated into a room-temperature rubidium vapor cell. The microwaves are tuned near the tw… ▽ More We present a spectral analysis of Rydberg atoms in strong microwave fields using electromagnetically induced transparency (EIT) as an all-optical readout. The measured spectroscopic response enables optical, atom-based electric field measurements of high-power microwaves. In our experiments, microwaves are irradiated into a room-temperature rubidium vapor cell. The microwaves are tuned near the two-photon 65D-66D Rydberg transition and reach an electric field strength of 230V/m, about 20% of the microwave ionization threshold of these atoms. A Floquet treatment is used to model the Rydberg level energies and their excitation rates. We arrive at an empirical model for the field-strength distribution inside the spectroscopic cell that yields excellent overall agreement between the measured and calculated Rydberg EIT-Floquet spectra. Using spectral features in the Floquet maps we achieve an absolute strong-field measurement precision of 6%. △ Less

Submitted 11 January, 2016; originally announced January 2016.

Journal ref: Phys. Rev. Applied 5, 034003 (2016)

Millimeter Wave Detection via Autler-Townes Splitting in Rubidium Rydberg Atoms

Authors: Joshua A. Gordon, Christopher L. Holloway, Andrew Schwarzkopf, Dave A. Anderson, Stephanie Miller, Nithiwadee Thaicharoen, Georg Raithel

Abstract: In this paper we demonstrate the detection of millimeter waves via Autler-Townes splitting in 85Rb Rydberg atoms. This method may provide an independent, atom-based, SI-traceable method for measuring mm-wave electric fields, which addresses a gap in current calibration techniques in the mm-wave regime. The electric- field amplitude within a rubidium vapor cell in the WR-10 waveguide band is measur… ▽ More In this paper we demonstrate the detection of millimeter waves via Autler-Townes splitting in 85Rb Rydberg atoms. This method may provide an independent, atom-based, SI-traceable method for measuring mm-wave electric fields, which addresses a gap in current calibration techniques in the mm-wave regime. The electric- field amplitude within a rubidium vapor cell in the WR-10 waveguide band is measured for frequencies of 93 GHz, and 104 GHz. Relevant aspects of Autler-Townes splitting originating from a four-level electromagnetically induced transparency scheme are discussed. We measure the E-field generated by an open-ended waveguide using this technique. Experimental results are compared to a full-wave finite element simulation. △ Less

Submitted 11 June, 2014; originally announced June 2014.

Broadband Rydberg Atom-Based Electric-Field Probe: From Self-Calibrated Measurements to Sub-Wavelength Imaging

Authors: Christopher L. Holloway, Josh A. Gordon, Steven Jefferts, Andrew Schwarzkopf, David A. Anderson, Stephanie A. Miller, Nithiwadee Thaicharoen, Georg Raithel

Abstract: We discuss a fundamentally new approach for the measurement of electric (E) fields that will lead to the development of a broadband, direct SI-traceable, compact, self-calibrating E-field probe (sensor). This approach is based on the interaction of radio frequency (RF) fields with alkali atoms excited to Rydberg states. The RF field causes an energy splitting of the Rydberg states via the Autler-T… ▽ More We discuss a fundamentally new approach for the measurement of electric (E) fields that will lead to the development of a broadband, direct SI-traceable, compact, self-calibrating E-field probe (sensor). This approach is based on the interaction of radio frequency (RF) fields with alkali atoms excited to Rydberg states. The RF field causes an energy splitting of the Rydberg states via the Autler-Townes effect and we detect the splitting via electromagnetically induced transparency (EIT). In effect, alkali atoms placed in a vapor cell act like an RF-to-optical transducer, converting an RF E-field strength measurement to an optical frequency measurement. We demonstrate the broadband nature of this approach by showing that one small vapor cell can be used to measure E-field strengths over a wide range of frequencies: 1 GHz to 500 GHz. The technique is validated by comparing experimental data to both numerical simulations and far-field calculations for various frequencies. We also discuss various applications, including: a direct traceable measurement, the ability to measure both weak and strong field strengths, compact form factors of the probe, and sub-wavelength imaging and field mapping. △ Less

Submitted 27 May, 2014; originally announced May 2014.

Comments: 12 pages, 20 figures

Journal ref: IEEE Transactions on Antennas and Propagation, vol. 62, no. 12, 6169-6182, 2014

Sub-Wavelength Imaging and Field Mapping via EIT and Autler-Townes Splitting In Rydberg Atoms

Authors: Christopher L. Holloway, Joshua A. Gordon, Andrew Schwarzkopf, David A. Anderson, Stephanie A. Miller, Nithiwadee Thaicharoen, Georg Raithel

Abstract: We present a technique for measuring radio-frequency (RF) electric field strengths with sub-wavelength resolution. We use Rydberg states of rubidium atoms to probe the RF field. The RF field causes an energy splitting of the Rydberg states via the Autler-Townes effect, and we detect the splitting via electromagnetically induced transparency (EIT). We use this technique to measure the electric fiel… ▽ More We present a technique for measuring radio-frequency (RF) electric field strengths with sub-wavelength resolution. We use Rydberg states of rubidium atoms to probe the RF field. The RF field causes an energy splitting of the Rydberg states via the Autler-Townes effect, and we detect the splitting via electromagnetically induced transparency (EIT). We use this technique to measure the electric field distribution inside a glass cylinder with applied RF fields at 17.04 GHz and 104.77 GHz. We achieve a spatial resolution of $\bf{\approx}$100 $\bfμ$m, limited by the widths of the laser beams utilized for the EIT spectroscopy. We numerically simulate the fields in the glass cylinder and find good agreement with the measured fields. Our results suggest that this technique could be applied to image fields on a small spatial scale over a large range of frequencies, up into the sub-THz regime. △ Less

Submitted 1 April, 2014; originally announced April 2014.

Comments: 12 pages, 9 figures

Journal ref: Appl. Phys. Lett. 104, 244102 (2014)

Boundary Effects on the Determination of Metamaterial Parameters from Normal Incidence Reflection and Transmission Measurements

Authors: Sung Kim, Edward F. Kuester, Christopher L. Holloway, Aaron D. Scher, James Baker-Jarvis

Abstract: A method is described for the determination of the effective electromagnetic parameters of a metamaterial based only on external measurements or simulations, taking boundary effects at the interfaces between a conventional material and metamaterial into account. Plane-wave reflection and transmission coefficients at the interfaces are regarded as additional unknowns to be determined, rather than e… ▽ More A method is described for the determination of the effective electromagnetic parameters of a metamaterial based only on external measurements or simulations, taking boundary effects at the interfaces between a conventional material and metamaterial into account. Plane-wave reflection and transmission coefficients at the interfaces are regarded as additional unknowns to be determined, rather than explicitly dependent on the material parameters. Our technique is thus analogous to the line-reflect-line (LRL) calibration method in microwave measurements. The refractive index can be determined from S-parameters for two samples of different thickness. The effective wave impedance requires the additional assumption that generalized sheet transition conditions (GSTCs) account for the boundary effects. Expressions for the bulk permittivity and permeability then follow easily. Our method is validated by comparison with the results using the Nicolson-Ross-Weir (NRW) for determining properties of an ordinary material measured in a coaxial line. Utilizing S-parameters obtained from 3-D full wave simulations, we test the method on magnetodielectric metamaterials. We compare the results from our method and the conventional one that does not consider boundary effects. Moreover, it is shown that results from our method are consistent under changes in reference plane location, whereas the results from other methods are not. △ Less

Submitted 6 October, 2010; v1 submitted 29 September, 2010; originally announced September 2010.

Comments: 16 pages, 16 figures. Submitted to IEEE Transactions on Antennas and Propagation