Showing 1–50 of 87 results for author: Ho, K

Optical centrifuge for nanoparticles

Authors: Peiyao Xiong, Kit Ka Kelvin Ho, J. M. H. Gosling, M. Rademacher, P. F. Barker

Abstract: We study the creation of an optical centrifuge for the controlled rotation of levitated nanorotors within an optical tweezer. The optical centrifuge is created by rapidly rotating the linear polarization of the tightly focused optical field used to form an optical trap. We show that nanorotors, formed by anisotropic nanoparticles levitated within the trap, can be accelerated to well-defined rotati… ▽ More We study the creation of an optical centrifuge for the controlled rotation of levitated nanorotors within an optical tweezer. The optical centrifuge is created by rapidly rotating the linear polarization of the tightly focused optical field used to form an optical trap. We show that nanorotors, formed by anisotropic nanoparticles levitated within the trap, can be accelerated to well-defined rotational rates in excess of 100 MHz over durations of hundreds of microseconds. The initial conditions required for stable acceleration, based on optical trap properties and the anisotropic susceptibility of the nanorotor are established, and confirmed by numerical simulations. We also present initial experiments that have developed tools for the rapid angular acceleration of the polarization vector of the linearly polarized beam that is required to create the centrifuge. We show that over the acceleration durations in the 100 $\upmu$s range, high rotational speeds could be achieved in modest vacuum. △ Less

Submitted 19 June, 2025; originally announced June 2025.

Comments: 10 pages,14 figures

Multipole nuclear shielding factors of hydrogen atom confined by a spherical cavity

Authors: Yu Qing Dai, Zhi Ling Zhou, Henry E. Montgomery, Jr., Yew Kam Ho, Aihua Liu, Li Guang Jiao

Abstract: Nuclear shielding factor is an important quantity to describe the response of an atom under the perturbation of an external field. In this work, we develop the sum-over-states numerical method and the Hylleraas variational perturbation approximation to calculate the multipole nuclear shielding factors for general one-electron systems and apply them to the model of the hydrogen atom confined by a s… ▽ More Nuclear shielding factor is an important quantity to describe the response of an atom under the perturbation of an external field. In this work, we develop the sum-over-states numerical method and the Hylleraas variational perturbation approximation to calculate the multipole nuclear shielding factors for general one-electron systems and apply them to the model of the hydrogen atom confined by a spherical cavity. The generalized pseudospectral method is employed to solve the eigenstates of the unperturbed atom. The obtained dipole nuclear shielding factors are in good agreement with previous calculations and the higher-pole results are reported for the first time. The asymptotic behaviors of the multipole nuclear shielding factors in both the large- and small-confinement limits are analyzed with the assistance of variational perturbation theory. The free-atom values can be exactly reproduced by the second-order perturbation approximation and all multipole nuclear shielding factors in the small-confinement limit tend to zero by a linear law. The variational perturbation method manifests exponential convergence with increasing the order of approximation. The numerical and approximate methods developed in this work together pave the way for further investigation of the multipole nuclear shielding factors for general atomic systems. △ Less

Submitted 24 April, 2025; originally announced April 2025.

The Fe-Ni phase diagram and the Earth's inner core structure

Authors: Liangrui Wei, Kai-Ming Ho, Renata M. Wentzcovitch, Yang Sun

Abstract: The Fe-Ni alloy is believed to be the main component of Earth's core. Yet, a comprehensive understanding of phase equilibria near the melting point of this alloy under core conditions is still lacking, leaving the effect of nickel inconclusive. Using ab initio simulations, we computed Gibbs free energy and phase diagram for liquid and solid solutions of the Fe-Ni alloy under conditions close to th… ▽ More The Fe-Ni alloy is believed to be the main component of Earth's core. Yet, a comprehensive understanding of phase equilibria near the melting point of this alloy under core conditions is still lacking, leaving the effect of nickel inconclusive. Using ab initio simulations, we computed Gibbs free energy and phase diagram for liquid and solid solutions of the Fe-Ni alloy under conditions close to the inner core, considering inner-shell electron contributions and non-ideal mixing effects. The Fe-Ni phase diagram provides crucial insights for understanding previous experimental observations and crystallization simulations of the Fe-Ni alloy under core conditions. It also presents new scenarios for inner core structures, suggesting bcc-liquid coexistence at the inner core boundary and the possibility of multi-layer structures consisting of bcc-hcp composites within the inner core. Our work clarifies nickel's substantial impact on the inner core structure, providing new constraints for the study of core's composition and formation. △ Less

Submitted 27 March, 2025; originally announced March 2025.

Comments: Under review

Understanding the two-step nucleation of iron at Earth's inner core conditions: a comparative molecular dynamics study

Authors: Chen Gao, Kai-Ming Ho, Renata M. Wentzcovitch, Yang Sun

Abstract: Metastable phases can lead to multistep nucleation processes, influencing the liquid-to-solid transition in various systems. In this study, we investigate the homogeneous nucleation of iron's crystalline phases under Earth's inner core conditions, employing two previously developed interatomic potentials. We compare the thermodynamic and kinetic properties of iron relevant to the nucleation as pre… ▽ More Metastable phases can lead to multistep nucleation processes, influencing the liquid-to-solid transition in various systems. In this study, we investigate the homogeneous nucleation of iron's crystalline phases under Earth's inner core conditions, employing two previously developed interatomic potentials. We compare the thermodynamic and kinetic properties of iron relevant to the nucleation as predicted by these potentials. While the potentials differ in their predictions of melting temperature by a few hundred Kelvin, they show a consistent description of the relative Gibbs free energy between solid and liquid phases with respect to the undercooling. Both potentials also predict that the metastable bcc phase exhibits a significantly higher nucleation rate than the hcp phase over a wide range of undercooling temperatures below the melting point. This substantially lowers the undercooling thresholds required for the initial nucleation of Earth's inner core. The results validate the commonality of the two-step nucleation mechanism of iron under Earth's inner core conditions for two different potentials, providing a foundation for future studies about the influence of other elements on the nucleation of Earth's core. △ Less

Submitted 19 March, 2025; v1 submitted 27 February, 2025; originally announced February 2025.

Comments: PRB in press

Journal ref: Phys. Rev. B 111, 134104 (2025)

Ab initio superionic-liquid phase diagram of Fe1-xOx under Earth's inner core conditions

Authors: Zepeng Wu, Chen Gao, Feng Zhang, Shunqing Wu, Kai-Ming Ho, Renata M. Wentzcovitch, Yang Sun

Abstract: The superionic state is a unique phase of matter in which liquid-like ion mobility coexists within a solid crystalline lattice. Recently discovered in Earth's inner core, this state has been extensively studied for its kinetic properties and geophysical impact. However, the equilibrium between the superionic phase and the liquid solution under core conditions remains unexplored. Here we present a… ▽ More The superionic state is a unique phase of matter in which liquid-like ion mobility coexists within a solid crystalline lattice. Recently discovered in Earth's inner core, this state has been extensively studied for its kinetic properties and geophysical impact. However, the equilibrium between the superionic phase and the liquid solution under core conditions remains unexplored. Here we present a thermodynamic method to calculate the Gibbs free energy and construct the ab initio superionic-liquid phase diagram for the Fe1-xOx system under inner core (IC) boundary conditions. We find that oxygen forms superionic states in both hcp and bcc iron in the IC, influencing iron's cooperative diffusion in the bcc phase. The stability fields of these superionic phases depend strongly on oxygen stoichiometry. Our results suggest that the oxygen concentration in the IC is higher than previously estimated due to the presence of superionic states. Our work provides a framework for studying superionic-liquid equilibria in planetary interiors. △ Less

Submitted 27 March, 2025; v1 submitted 30 October, 2024; originally announced October 2024.

Wideband Coherent Microwave Conversion via Magnon Nonlinearity in Hybrid Quantum System

Authors: Jiahao Wu, Jiacheng Liu, Zheyu Ren, Man Yin Leung, Wai Kuen Leung, Kin On Ho, Xiangrong Wang, Qiming Shao, Sen Yang

Abstract: Frequency conversion is a widely realized physical process in nonlinear systems of optics and electronics. As an emerging nonlinear platform, spintronic devices have the potential to achieve stronger frequency conversion. Here, we demonstrated a microwave frequency conversion method in a hybrid quantum system, integrating nitrogen-vacancy centers in diamond with magnetic thin film CoFeB. We achiev… ▽ More Frequency conversion is a widely realized physical process in nonlinear systems of optics and electronics. As an emerging nonlinear platform, spintronic devices have the potential to achieve stronger frequency conversion. Here, we demonstrated a microwave frequency conversion method in a hybrid quantum system, integrating nitrogen-vacancy centers in diamond with magnetic thin film CoFeB. We achieve a conversion bandwidth ranging from 0.1 to 12GHz, presenting an up to $\mathrm{25^{th}}$ order frequency conversion and further display the application of this method for frequency detection and qubits coherent control. Distinct from traditional frequency conversion techniques based on nonlinear electric response, our approach employs nonlinear magnetic response in spintronic devices. The nonlinearity, originating from the symmetry breaking such as domain walls in magnetic films, presents that our method can be adapted to hybrid systems of other spintronic devices and spin qubits, expanding the application scope of spintronic devices and providing a promising on-chip platform for coupling quantum systems. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: 11 pages, 5 figures

Journal ref: npj Spintronics volume 2, Article number: 30 (2024)

Neutral hydrogen filaments in interstellar media: Are they physical?

Authors: Ka Ho Yuen, Ka Wai Ho, Chi Yan Law, Avi Chen

Abstract: The trending term "filament" is extensively used in the interstellar medium (ISM) and the star formation community, and is believed to be one of the most important objects that gauge molecular cloud and star formation. However, the physical definition of these ubiquitous, elongated, high contrast features is poorly defined and still actively debated. Despite the absence of a unified consensus, fil… ▽ More The trending term "filament" is extensively used in the interstellar medium (ISM) and the star formation community, and is believed to be one of the most important objects that gauge molecular cloud and star formation. However, the physical definition of these ubiquitous, elongated, high contrast features is poorly defined and still actively debated. Despite the absence of a unified consensus, filaments are believed to be involved in many important physical processes from galaxy structure formation to the emergence of protostellar objects. Therefore, understanding how filaments form, what constrains their growth, and their general physical properties, are extremely important for theorists and observers who study the dynamics of the ISM and consequent star formations. This review serves as a collection of the community's views and develops the concept of "filaments" in the context of the ISM and star-forming clouds. Observationally, filaments are seen across the entire sky and often carry an aspect ratio of the order of hundreds. In the context of the ISM, filaments are believed to form by stretching and tearing from magnetized ISM turbulence. ISM filaments are subjected to heating and cooling phases, and are likely to be magnetically aligned. Cold clouds are formed inside ISM due to turbulence instability. This review updates the understanding of ISM filaments in the community. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Journal ref: Rev. Mod. Plasma Phys. 8, 21 (2024)

Melting Temperature of Iron Under the Earth's Inner Core Condition from Deep Machine Learning

Authors: Fulun Wu, Cai-Zhuang Wang, Kai-Ming Ho, Shunqing Wu, Renata M. Wentzcovitch, Yang Sun

Abstract: Constraining the melting temperature of iron under Earth's inner core conditions is crucial for understanding core dynamics and planetary evolution. Here, we develop a deep potential (DP) model for iron that explicitly incorporates electronic entropy contributions governing thermodynamics under Earth's core conditions. Extensive benchmarking demonstrates the DP's high fidelity across relevant iron… ▽ More Constraining the melting temperature of iron under Earth's inner core conditions is crucial for understanding core dynamics and planetary evolution. Here, we develop a deep potential (DP) model for iron that explicitly incorporates electronic entropy contributions governing thermodynamics under Earth's core conditions. Extensive benchmarking demonstrates the DP's high fidelity across relevant iron phases and extreme pressure and temperature conditions. Through thermodynamic integration and direct solid-liquid coexistence simulations, the DP predicts melting temperatures for iron at the inner core boundary, consistent with previous \textit{ab initio} results. This resolves the previous discrepancy of iron's melting temperature at ICB between the DP model and \textit{ab initio} calculation and suggests the crucial contribution of electronic entropy. Our work provides insights into machine learning melting behavior of iron under core conditions and provides the basis for future development of binary or ternary DP models for iron and other elements in the core. △ Less

Submitted 27 April, 2024; originally announced April 2024.

Journal ref: Geoscience Frontiers 15, 101925 (2024)

Heat Transfer Coefficients of Moving Particle Beds from Flow-Dependent Particle Bed Thermal Conductivity and Near-Wall Resistance

Authors: Sarath R. Adapa, Xintong Zhang, Tianshi Feng, Ka Man Chung, Kevin J. Albrecht, Clifford K. Ho, Dimitri A. Madden, Renkun Chen

Abstract: Determination of heat transfer coefficients for flowing packed particle beds is essential to the design of particle heat exchangers, and other thermal processes. While such dense granular flows fall into the well-known plug-flow regime, the discrete nature of granular materials alters the thermal transport processes in both the near-wall and bulk regions of flowing particle beds from their station… ▽ More Determination of heat transfer coefficients for flowing packed particle beds is essential to the design of particle heat exchangers, and other thermal processes. While such dense granular flows fall into the well-known plug-flow regime, the discrete nature of granular materials alters the thermal transport processes in both the near-wall and bulk regions of flowing particle beds from their stationary counterparts. As a result, heat transfer correlations based on the stationary particle bed thermal conductivity could be inadequate for flowing particles in a heat exchanger. Earlier works have achieved reasonable agreement with experiments by treating granular media as a plug-flow continuum with a near-wall thermal resistance in series. However, the properties of the continuum were often obtained from measurements on stationary beds owing to the difficulty of flowing bed measurements. In this work, it was found that the properties of a stationary bed are highly sensitive to the method of particle packing and there is a decrease in the particle bed thermal conductivity and increase in the near-wall thermal resistance, measured as an effective air gap thickness, on the onset of particle flow. These variations in the thermophysical properties of stationary and flowing particle beds can lead to errors in heat transfer coefficient calculations. Therefore, the heat transfer coefficients for granular flows were calculated using experimentally determined flowing particle bed thermal conductivity and near-wall air gap for ceramic particles -CARBOCP40/100(275 um), HSP40/70(404um) and HSP16/30(956um); at velocities of 5-15mms-1; and temperatures of 300-650C. The thermal conductivity and air gap values for CP40/100 and HSP40/70 were further used to calculate heat transfer coefficients across different particle bed temperatures and velocities for different parallel-plate heat exchanger dimensions. △ Less

Submitted 20 September, 2024; v1 submitted 28 March, 2024; originally announced March 2024.

Finite-nuclear-size effect in hydrogen-like ions with relativistic nuclear structure

Authors: Hui Hui Xie, Jian Li, Li Guang Jiao, Yew Kam Ho

Abstract: The finite-nuclear-size (FNS) effect has a large contribution to the atomic spectral properties especially for heavy nuclei. By adopting the microscopic nuclear charge density distributions obtained from the relativistic continuum Hartree-Bogoliubov (RCHB) theory, we systematically investigate the FNS corrections to atomic energy levels and bound-electron $g$ factors of hydrogen-like ions with nuc… ▽ More The finite-nuclear-size (FNS) effect has a large contribution to the atomic spectral properties especially for heavy nuclei. By adopting the microscopic nuclear charge density distributions obtained from the relativistic continuum Hartree-Bogoliubov (RCHB) theory, we systematically investigate the FNS corrections to atomic energy levels and bound-electron $g$ factors of hydrogen-like ions with nuclear charge up to $118$. The comparison of the present numerical calculations with the predictions from empirical nuclear charge models, the non-relativistic Skyrme-Hartree-Fock calculations, and the results based on experimental charge densities indicate that both the nuclear charge radius and the detailed shape of charge density distribution play important roles in determining the FNS corrections. The variation of FNS corrections to energy levels and $g$ factors with respect to the nuclear charge are investigated for the lowest several bound states of hydrogen-like ions. It is shown that they both increase by orders of magnitude with increasing the nuclear charge, while the ratio between them has a relatively weak dependence on the nuclear charge. The FNS corrections to the $s_{1/2}$ and $p_{1/2}$ bound state energies from the RCHB calculations are generally in good agreement with the analytical estimations by Shabaev [J. Phys. B, 26, 1103 (1993)] based on the homogeneously charged sphere nuclear model, with the discrepancy indicating the distinct contribution of microscopic nuclear structure to the FNS effects. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Comments: 13 pages, 4 figures

Journal ref: Physical Review A 107, 042807 (2023)

Unveiling the effect of Ni on the formation and structure of Earth's inner core

Authors: Yang Sun, Mikhail I. Mendelev, Feng Zhang, Xun Liu, Bo Da, Cai-Zhuang Wang, Renata M. Wentzcovitch, Kai-Ming Ho

Abstract: Ni is the second most abundant element in the Earth's core. Yet, its effects on the inner core's structure and formation process are usually disregarded because of its electronic and size similarity with Fe. Using ab initio molecular dynamics simulations, we find that the bcc phase can spontaneously crystallize in liquid Ni at temperatures above Fe's melting point at inner core pressures. The melt… ▽ More Ni is the second most abundant element in the Earth's core. Yet, its effects on the inner core's structure and formation process are usually disregarded because of its electronic and size similarity with Fe. Using ab initio molecular dynamics simulations, we find that the bcc phase can spontaneously crystallize in liquid Ni at temperatures above Fe's melting point at inner core pressures. The melting temperature of Ni is shown to be 700-800 K higher than that of Fe at 323-360 GPa. hcp, bcc, and liquid phase relation differ for Fe and Ni. Ni can be a bcc stabilizer for Fe at high temperatures and inner core pressures. A small amount of Ni can accelerate Fe's crystallization at core pressures. These results suggest Ni may substantially impact the structure and formation process of the solid inner core. △ Less

Submitted 22 September, 2023; v1 submitted 8 August, 2023; originally announced August 2023.

Journal ref: Proc. Natl. Acad. Sci. U.S.A. 121, e2316477121 (2024)

Structural prediction of Fe-Mg-O compounds at Super-Earth's pressures

Authors: Yimei Fang, Yang Sun, Renhai Wang, Feng Zheng, Feng Zhang, Shunqing Wu, Cai-Zhuang Wang, Renata M. Wentzcovitch, Kai-Ming Ho

Abstract: Terrestrial exoplanets are of great interest for being simultaneously similar to and different from Earth. Their compositions are likely comparable to those of solar-terrestrial objects, but their internal pressures and temperatures can vary significantly with their masses/sizes. The most abundant non-volatile elements are O, Mg, Si, Fe, Al, and Ca, and there has been much recent progress in under… ▽ More Terrestrial exoplanets are of great interest for being simultaneously similar to and different from Earth. Their compositions are likely comparable to those of solar-terrestrial objects, but their internal pressures and temperatures can vary significantly with their masses/sizes. The most abundant non-volatile elements are O, Mg, Si, Fe, Al, and Ca, and there has been much recent progress in understanding the nature of magnesium silicates up to and beyond ~3 TPa. However, a critical element, Fe, has yet to be systematically included in materials discovery studies of potential terrestrial planet-forming phases at ultra-high pressures. Here, using the adaptive genetic algorithm (AGA) crystal structure prediction method, we predict several unreported stable crystalline phases in the binary Fe-Mg and ternary Fe-Mg-O systems up to pressures of 3 TPa. The analysis of the local packing motifs of the low-enthalpy Fe-Mg-O phases reveals that the Fe-Mg-O system favors a BCC motif under ultra-high pressures regardless of chemical composition. Besides, oxygen enrichment is conducive to lowering the enthalpies of the Fe-Mg-O phases. Our results extend the current knowledge of structural information of the Fe-Mg-O system to exoplanet pressures. △ Less

Submitted 7 July, 2023; originally announced July 2023.

Structure and dynamics of Fe90Si3O7 liquids close to Earth's liquid core conditions

Authors: Ling Tang, Chao Zhang, Yang Sun, Kai-Ming Ho, Renata M. Wentzcovitch, Cai-Zhuang Wang

Abstract: Using an artificial neural-network machine learning interatomic potential, we have performed molecular dynamics simulations to study the structure and dynamics of Fe90Si3O7 liquid close to the Earth's liquid core conditions. The simulation results reveal that the short-range structural order (SRO) in the Fe90Si3O7 liquid is very strong. About 80% of the atoms are arranged in crystalline-like SRO m… ▽ More Using an artificial neural-network machine learning interatomic potential, we have performed molecular dynamics simulations to study the structure and dynamics of Fe90Si3O7 liquid close to the Earth's liquid core conditions. The simulation results reveal that the short-range structural order (SRO) in the Fe90Si3O7 liquid is very strong. About 80% of the atoms are arranged in crystalline-like SRO motifs. In particular, ~70% of Fe-centered clusters can be classified as either hexagonal-close-pack (HCP/HCP-like) or icosahedral (ICO/ICO-like) SRO motifs. The SRO clusters centered on Fe, Si, or O atoms are strongly intermixed and homogenously distributed throughout the liquid. The atomic structure of the liquid and the fractions of dominant SRO clusters are not sensitive to pressure/temperature used in the simulations except that the SRO of the O-centered clusters is enhanced close to inner core pressures. The O diffusion coefficient is about 2-3 times larger than the Fe and Si ions and increases more rapidly in the deeper core regions. △ Less

Submitted 6 March, 2023; originally announced March 2023.

Optimizing Multi-Spacecraft Cislunar Space Domain Awareness Systems via Hidden-Genes Genetic Algorithm

Authors: Lois Visonneau, Yuri Shimane, Koki Ho

Abstract: This paper proposes an optimization problem formulation to tackle the challenges of cislunar Space Domain Awareness (SDA) through multi-spacecraft monitoring. Due to the large volume of interest as well as the richness of the dynamical environment, traditional design approaches for Earth-based architectures are known to have challenges in meeting design requirements for the cislunar SDA; thus, the… ▽ More This paper proposes an optimization problem formulation to tackle the challenges of cislunar Space Domain Awareness (SDA) through multi-spacecraft monitoring. Due to the large volume of interest as well as the richness of the dynamical environment, traditional design approaches for Earth-based architectures are known to have challenges in meeting design requirements for the cislunar SDA; thus, there is a growing need to have a multi-spacecraft system in cislunar orbits for SDA. The design of multi-spacecraft-based cislunar SDA architecture results in a complex multi-objective optimization problem, where parameters such as number of spacecraft, observability, and orbit stability must be taken into account simultaneously. Through the use of a multi-objective hidden genes genetic algorithm, this study explores the entirety of the design space associated with the cislunar SDA problem. A demonstration case study shows that our approach can provide architectures optimized for both cost and effectiveness. △ Less

Submitted 23 February, 2023; v1 submitted 19 February, 2023; originally announced February 2023.

Comments: 22 pages, 8 figures, submitted to the Journal of the Astronautical Sciences

Journal ref: Journal of the Astronautical Sciences 70, 22 (2023)

Tailored plasmons in pentacene/graphene heterostructures with interlayer electron transfer

Authors: Fengrui Hu, Minsung Kim, Y. Zhang, Yilong Luan, Kai-Ming Ho, Yi Shi, Cai-Zhuang Wang, Xinran Wang, Zhe Fei

Abstract: Van der Waals (vdW) heterostructures, which are produced by the precise assemblies of varieties of two-dimensional (2D) materials, have demonstrated many novel properties and functionalities. Here we report a nano-plasmonic study of vdW heterostructures that were produced by depositing ordered molecular layers of pentacene on top of graphene. We find through nano-infrared (IR) imaging that surface… ▽ More Van der Waals (vdW) heterostructures, which are produced by the precise assemblies of varieties of two-dimensional (2D) materials, have demonstrated many novel properties and functionalities. Here we report a nano-plasmonic study of vdW heterostructures that were produced by depositing ordered molecular layers of pentacene on top of graphene. We find through nano-infrared (IR) imaging that surface plasmons formed due to the collective oscillations of Dirac fermions in graphene are highly sensitive to the adjacent pentacene layers. In particular, the plasmon wavelength declines systematically but nonlinearly with increasing pentacene thickness. Further analysis and density functional theory (DFT) calculations indicate that the observed peculiar thickness dependence is mainly due to the tunneling-type electron transfer from pentacene to graphene. Our work unveils a new method for tailoring graphene plasmons and deepens our understanding of the intriguing nano-optical phenomena due to interlayer couplings in novel vdW heterostructures. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: 21 pages

Journal ref: Nano Lett. 19, 6058-6064 (2019)

Imaging Stacking-Dependent Surface Plasmon Polaritons in Trilayer Graphene

Authors: Yilong Luan, Jun Qian, Minsung Kim, Kai-Ming Ho, Yi Shi, Yun Li, Cai-Zhuang Wang, Michael C. Tringides, Zhe Fei

Abstract: We report a nano-infrared (IR) imaging study of trilayer graphene (TLG) with both ABA (Bernal) and ABC (rhombohedral) stacking orders using the scattering-type scanning near-field optical microscope (s-SNOM). With s-SNOM operating in the mid-IR region, we mapped in real space the surface plasmon polaritons (SPPs) of ABA-TLG and ABC-TLG, which are tunable with electrical gating. Through quantitativ… ▽ More We report a nano-infrared (IR) imaging study of trilayer graphene (TLG) with both ABA (Bernal) and ABC (rhombohedral) stacking orders using the scattering-type scanning near-field optical microscope (s-SNOM). With s-SNOM operating in the mid-IR region, we mapped in real space the surface plasmon polaritons (SPPs) of ABA-TLG and ABC-TLG, which are tunable with electrical gating. Through quantitative modeling of the plasmonic imaging data, we found that the plasmon wavelength of ABA-TLG is significantly larger than that of ABC-TLG, resulting in a sizable impedance mismatch and hence a strong plasmon reflection at the ABA/ABC lateral junction. Further analysis indicates that the different plasmonic responses of the two types of TLG are directly linked to their electronic structures and carrier properties. Our work uncovers the physics behind the stacking-dependent plasmonic responses of TLG and sheds light on future applications of TLG and the ABA/ABC junctions in IR plasmonics and planar nano-optics. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: 11 pages

Journal ref: Phys. Rev. Applied 18, 024052 (2022)

Spot Focusing Coma Correction by Linearly Polarized Dual-Transmitarray Antenna in the Terahertz Region

Authors: Ka Kit Kelvin Ho, Geng-Bo Wu, Bao-Jie Chen, Ka Fai Chan, Chi Hou Chan

Abstract: Focus scanning is critically important in many terahertz (THz) imaging and sensing applications. A traditional single focusing transmitarray can achieve a good focus when the source is on-axis but moving the source off-axis produces a significant aberration. This paper presents a novel approach to reducing coma in off-axis scanning in the THz region. Here, a dual transmitarray solution is proposed… ▽ More Focus scanning is critically important in many terahertz (THz) imaging and sensing applications. A traditional single focusing transmitarray can achieve a good focus when the source is on-axis but moving the source off-axis produces a significant aberration. This paper presents a novel approach to reducing coma in off-axis scanning in the THz region. Here, a dual transmitarray solution is proposed, in which a transmitarray with an optimized phase profile is placed behind a regular phase profile transmitarray. A linearly polarized, dual-transmitarray antenna was fabricated for validation, and the focusing performances were experimentally characterized. The measured results are in good agreement with the theoretical ones. The generated spot of the dual-transmitarray antenna remains focused on an angle up to 50deg, with a -3 dB spot size of less than 4 mm at 290 GHz. The measured near-field sidelobes are all below -10 dB within the whole scanning range. △ Less

Submitted 24 November, 2022; originally announced November 2022.

Comments: 9 pages, 14 figures

Automated Quantification of Traffic Particulate Emissions via an Image Analysis Pipeline

Authors: Kong Yuan Ho, Chin Seng Lim, Matthena A. Kattar, Bharathi Boppana, Liya Yu, Chin Chun Ooi

Abstract: Traffic emissions are known to contribute significantly to air pollution around the world, especially in heavily urbanized cities such as Singapore. It has been previously shown that the particulate pollution along major roadways exhibit strong correlation with increased traffic during peak hours, and that reductions in traffic emissions can lead to better health outcomes. However, in many instanc… ▽ More Traffic emissions are known to contribute significantly to air pollution around the world, especially in heavily urbanized cities such as Singapore. It has been previously shown that the particulate pollution along major roadways exhibit strong correlation with increased traffic during peak hours, and that reductions in traffic emissions can lead to better health outcomes. However, in many instances, obtaining proper counts of vehicular traffic remains manual and extremely laborious. This then restricts one's ability to carry out longitudinal monitoring for extended periods, for example, when trying to understand the efficacy of intervention measures such as new traffic regulations (e.g. car-pooling) or for computational modelling. Hence, in this study, we propose and implement an integrated machine learning pipeline that utilizes traffic images to obtain vehicular counts that can be easily integrated with other measurements to facilitate various studies. We verify the utility and accuracy of this pipeline on an open-source dataset of traffic images obtained for a location in Singapore and compare the obtained vehicular counts with collocated particulate measurement data obtained over a 2-week period in 2022. The roadside particulate emission is observed to correlate well with obtained vehicular counts with a correlation coefficient of 0.93, indicating that this method can indeed serve as a quick and effective correlate of particulate emissions. △ Less

Submitted 24 November, 2022; originally announced November 2022.

(3-Aminopropyl)trimethoxysilane Surface Passivation Improves Perovskite Solar Cell Performance by Reducing Surface Recombination Velocity

Authors: Yangwei Shi, Esteban Rojas-Gatjens, Jian Wang, Justin Pothoof, Rajiv Giridharagopal, Kevin Ho, Fangyuan Jiang, Margherita Taddei, Zhaoqing Yang, Carlos Silva-Acuña, David S. Ginger

Abstract: We demonstrate reduced surface recombination velocity (SRV) and enhanced power-conversion efficiency (PCE) in mixed-cation mixed-halide perovskite solar cells by using (3-aminopropyl)trimethoxysilane (APTMS) as a surface passivator. We show the APTMS serves to passivate defects at the perovskite surface, while also decoupling the perovskite from detrimental interactions at the C60 interface. We me… ▽ More We demonstrate reduced surface recombination velocity (SRV) and enhanced power-conversion efficiency (PCE) in mixed-cation mixed-halide perovskite solar cells by using (3-aminopropyl)trimethoxysilane (APTMS) as a surface passivator. We show the APTMS serves to passivate defects at the perovskite surface, while also decoupling the perovskite from detrimental interactions at the C60 interface. We measure a SRV of ~125 + 14 cm/s, and a concomitant increase of ~100 meV in quasi-Fermi level splitting in passivated devices compared to the controls. We use time-resolved photoluminescence and excitation-correlation photoluminescence spectroscopy to show that APTMS passivation effectively suppresses non-radiative recombination. We show that APTMS improves both the fill factor and open-circuit voltage (VOC), increasing VOC from 1.03 V for control devices to 1.09 V for APTMS-passivated devices, which leads to PCE increasing from 15.90% to 18.03%. We attribute enhanced performance to reduced defect density or suppressed nonradiative recombination and low SRV at the perovskite/transporting layers interface. △ Less

Submitted 29 September, 2022; originally announced September 2022.

Comments: 22 pages, 6 figures

Ab initio melting temperatures of bcc and hcp iron under the Earth's inner core condition

Authors: Yang Sun, Mikhail I. Mendelev, Feng Zhang, Xun Liu, Bo Da, Cai-Zhuang Wang, Renata M. Wentzcovitch, Kai-Ming Ho

Abstract: There has been a long debate on the stable phase of iron under the Earth's inner core conditions. Because of the solid-liquid coexistence at the inner core boundary, the thermodynamic stability of solid phases directly relates to their melting temperatures, which remains considerable uncertainty. In the present study, we utilized a semi-empirical potential fitted to high-temperature ab initio data… ▽ More There has been a long debate on the stable phase of iron under the Earth's inner core conditions. Because of the solid-liquid coexistence at the inner core boundary, the thermodynamic stability of solid phases directly relates to their melting temperatures, which remains considerable uncertainty. In the present study, we utilized a semi-empirical potential fitted to high-temperature ab initio data to perform a thermodynamic integration from classical systems described by this potential to ab initio systems. This method provides a smooth path for thermodynamic integration and significantly reduces the uncertainty caused by the finite-size effect. Our results suggest the hcp phase is the stable phase of pure iron under the inner core conditions, while the free energy difference between the hcp and bcc phases is tiny, on the order of 10s meV/atom near the melting temperature. △ Less

Submitted 9 March, 2023; v1 submitted 4 May, 2022; originally announced May 2022.

Comments: 4 figures

Journal ref: Geophys. Res. Lett. 50, e2022GL102447 (2023)

Reduced Recombination via Tunable Surface Fields in Perovskite Solar Cells

Authors: Dane W. deQuilettes, Jason Jungwan Yoo, Roberto Brenes, Felix Utama Kosasih, Madeleine Laitz, Benjia Dak Dou, Daniel J. Graham, Kevin Ho, Seong Sik Shin, Caterina Ducati, Moungi Bawendi, Vladimir Bulović

Abstract: The ability to reduce energy loss at semiconductor surfaces through passivation or surface field engineering has become an essential step in the manufacturing of efficient photovoltaic (PV) and optoelectronic devices. Similarly, surface modification of emerging halide perovskites with quasi-2D heterostructures is now ubiquitous to achieve PV power conversion efficiencies (PCEs) > 22% and has enabl… ▽ More The ability to reduce energy loss at semiconductor surfaces through passivation or surface field engineering has become an essential step in the manufacturing of efficient photovoltaic (PV) and optoelectronic devices. Similarly, surface modification of emerging halide perovskites with quasi-2D heterostructures is now ubiquitous to achieve PV power conversion efficiencies (PCEs) > 22% and has enabled single-junction PV devices to reach 25.7%, yet a fundamental understanding to how these treatments function is still generally lacking. This has established a bottleneck for maximizing beneficial improvements as no concrete selection and design rules currently exist. Here we uncover a new type of tunable passivation strategy and mechanism found in perovskite PV devices that were the first to reach the > 25% PCE milestone, which is enabled by surface treating a bulk perovskite layer with hexylammonium bromide (HABr). We uncover the simultaneous formation of an iodide-rich 2D layer along with a Br halide gradient achieved through partial halide exchange that extends from defective surfaces and grain boundaries into the bulk layer. We demonstrate and directly visualize the tunability of both the 2D layer thickness, halide gradient, and band structure using a unique combination of depth-sensitive nanoscale characterization techniques. We show that the optimization of this interface can extend the charge carrier lifetime to values > 30 μs, which is the longest value reported for a direct bandgap semiconductor (GaAs, InP, CdTe) over the past 50 years. Importantly, this work reveals an entirely new strategy and knob for optimizing and tuning recombination and charge transport at semiconductor interfaces and will likely establish new frontiers in achieving the next set of perovskite device performance records. △ Less

Submitted 9 November, 2022; v1 submitted 15 April, 2022; originally announced April 2022.

Comments: Main text: 16 pages, 4 figures. Supporting Information: 47 pages, 26 figures, 6 tables

Optical photonic crystals fabricated from colloidal systems

Authors: G. Subramania, K. Constant, R. Biswas, M. M. Sigalas, K. -M. Ho

Abstract: Photonic crystals of close-packed arrays of air spheres in a dielectric background of titania have been fabricated with a novel ceramic technique. Unlike previous methods, ordering of the spheres and the formation of the titania network are performed simultaneously. The photonic crystals exhibit a reflectance peak and a uniform color at the position of the first stop band. The wavelength of the re… ▽ More Photonic crystals of close-packed arrays of air spheres in a dielectric background of titania have been fabricated with a novel ceramic technique. Unlike previous methods, ordering of the spheres and the formation of the titania network are performed simultaneously. The photonic crystals exhibit a reflectance peak and a uniform color at the position of the first stop band. The wavelength of the reflectance peak scales very well with the sphere size. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Comments: 7 pages, 2 figures

Journal ref: Applied Physics Letters vol. 74, 3933 (1999)

Iron-rich Fe-O compounds with closest-packed layers at core pressures

Authors: Jin Liu, Yang Sun, Chaojia Lv, Feng Zhang, Suyu Fu, Vitali B. Prakapenka, Cai-Zhuang Wang, Kai-Ming Ho, Jung-Fu Lin, Renata M. Wentzcovitch

Abstract: Oxygen solubility in solid iron is extremely low, even at high pressures and temperatures. Thus far, no Fe-O compounds between Fe and FeO endmembers have been reported experimentally. We observed chemical reactions of Fe with FeO or Fe$_2$O$_3$ $in\ situ$ x-ray diffraction experiments at 220-260 GPa and 3,000-3,500 K. The refined diffraction patterns are consistent with a series of Fe$_n$O (n $>$… ▽ More Oxygen solubility in solid iron is extremely low, even at high pressures and temperatures. Thus far, no Fe-O compounds between Fe and FeO endmembers have been reported experimentally. We observed chemical reactions of Fe with FeO or Fe$_2$O$_3$ $in\ situ$ x-ray diffraction experiments at 220-260 GPa and 3,000-3,500 K. The refined diffraction patterns are consistent with a series of Fe$_n$O (n $>$ 1) compounds (e.g., Fe$_{25}$O$_{13}$ and Fe$_{28}$O$_{14}$) identified using the adaptive genetic algorithm. Like $ε$-Fe in the hexagonal close-packed (hcp) structure, the structures of Fe$_n$O compounds consist of oxygen-only close-packed monolayers distributed between iron-only layers. $Ab\ initio$ calculations show systematic electronic properties of these compounds that have ramifications for the physical properties of Earth's inner core. △ Less

Submitted 1 October, 2021; originally announced October 2021.

Comments: 6 pages, 4 figures

Two-step nucleation of the Earth's inner core

Authors: Yang Sun, Feng Zhang, Mikhail I. Mendelev, Renata M. Wentzcovitch, Kai-Ming Ho

Abstract: It has long been assumed the Earth's solid inner core started to grow when molten iron cooled to its melting point. However, the nucleation mechanism, which is a necessary step of crystallization, has not been well understood. Recent studies found it requires an unrealistic degree of undercooling to nucleate the stable hexagonal close-packed (hcp) phase of iron, which can never be reached under th… ▽ More It has long been assumed the Earth's solid inner core started to grow when molten iron cooled to its melting point. However, the nucleation mechanism, which is a necessary step of crystallization, has not been well understood. Recent studies found it requires an unrealistic degree of undercooling to nucleate the stable hexagonal close-packed (hcp) phase of iron, which can never be reached under the actual Earth's core conditions. This contradiction leads to the inner core nucleation paradox [1]. Here, using a persistent-embryo method and molecular dynamics simulations, we demonstrate that the metastable body-centered cubic (bcc) phase of iron has a much higher nucleation rate than the hcp phase under inner-core conditions. Thus, the bcc nucleation is likely to be the first step of inner core formation instead of direct nucleation of the hcp phase. This mechanism reduces the required undercooling of iron nucleation, which provides a key factor to solve the inner-core nucleation paradox. The two-step nucleation scenario of the inner core also opens a new avenue for understanding the structure and anisotropy of the present inner core. △ Less

Submitted 7 January, 2022; v1 submitted 15 May, 2021; originally announced May 2021.

Comments: 8 pages, 4 figures. Supplementary information uploaded with the source files

Journal ref: Proc. Natl. Acad. Sci. U.S.A. 119, e2113059119 (2022)

Measurement and Analysis of Thermal Conductivity of Ceramic Particle Beds for Solar Thermal Energy Storage

Authors: Ka Man Chung, Jian Zeng, Sarath Reddy Adapa, Tianshi Feng, Malavika V. Bagepalli, Peter G. Loutzenhiser, Kevin J. Albrecht, Clifford K. Ho, Renkun Chen

Abstract: A systematic study was performed to measure the effective thermal conductivity of ceramic particle beds, a promising heat transfer and thermal energy storage media for concentrating solar power (CSP). The thermal conductivity of the ceramic particle beds was measured using a transient hot-wire (THW) method within a temperature range of room temperature to 700 oC, the target operating temperature o… ▽ More A systematic study was performed to measure the effective thermal conductivity of ceramic particle beds, a promising heat transfer and thermal energy storage media for concentrating solar power (CSP). The thermal conductivity of the ceramic particle beds was measured using a transient hot-wire (THW) method within a temperature range of room temperature to 700 oC, the target operating temperature of the next-generation CSP systems. Two different types of ceramic particles were examined: (1) CARBOBEAD HSP 40/70 and (2) CARBOBEAD CP 40/100 with the average particle sizes of ~ 400 μm and ~280 μm, respectively, and thermal conductivities ranging from ~0.25 W m-1 K-1 to ~0.50 W m-1 K-1 from 20 oC to 700 oC in both air and N2 gas. The gaseous pressure dependence of the thermal conductivity of the ceramic particle beds was also studied in the N2 environment to differentiate the contributions from gas conduction, solid conduction, and radiation. Calculations using the Zehner, Bauer, and Schlünder (ZBS) model showed good agreements with the measurements. Based on the model, it is concluded that the effective thermal conductivity of the packed particle beds is dominated by the gas conduction while the solid conduction and radiation contributes to about 20% of the effective thermal conductivity at high temperature. △ Less

Submitted 5 May, 2021; originally announced May 2021.

Comments: Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, California 92093, USA Georgia Institute of Technology, Atlanta, Georgia 30332-0405, USA Sandia National Laboratories, 1515 Eubank Blvd. SE, Albuquerque, NM 87123, USA #Corresponding author: [email protected]

Unconventional iron-magnesium compounds at terapascal pressures

Authors: Yimei Fang, Yang Sun, Renhai Wang, Feng Zheng, Shunqing Wu, Cai-Zhuang Wang, Renata M. Wentzcovitch, Kai-Ming Ho

Abstract: Being a lithophile element at ambient pressure, magnesium is long believed to be immiscible with iron. A recent study by Gao et al. [1] showed that pressure turns magnesium into a siderophile element and can produce unconventional Fe-Mg compounds. Here, we extend the investigation to exoplanetary pressure conditions using an adaptive genetic algorithm-based variable-composition structural predicti… ▽ More Being a lithophile element at ambient pressure, magnesium is long believed to be immiscible with iron. A recent study by Gao et al. [1] showed that pressure turns magnesium into a siderophile element and can produce unconventional Fe-Mg compounds. Here, we extend the investigation to exoplanetary pressure conditions using an adaptive genetic algorithm-based variable-composition structural prediction approach. We identify several Fe-Mg phases up to 3 TPa. Our cluster alignment analysis reveals that most of the predicted Fe-Mg compounds prefer a BCC packing motif at terapascal pressures. This study provides a more comprehensive structure database to support future investigations of the high-pressure structural behavior of Fe-Mg and ternary, quaternary, etc. compounds involving these elements. △ Less

Submitted 15 April, 2021; originally announced April 2021.

Comments: 6 pages, 7 figures

Journal ref: Phys. Rev. B 104, 144109, 2021

Prediction of crystal structures and motifs in the Fe-Mg-O system at Earth's core pressures

Authors: Renhai Wang, Yang Sun, Renata M. Wentzcovitch, Feng Zheng, Yimei Fang, Shunqing Wu, Zijing Lin, Cai-Zhuang Wang, Kai-Ming Ho

Abstract: Fe, Mg, and O are among the most abundant elements in terrestrial planets. While the behavior of the Fe-O, Mg-O, and Fe-Mg binary systems under pressure have been investigated, there are still very few studies of the Fe-Mg-O ternary system at relevant Earth's core and super-Earth's mantle pressures. Here, we use the adaptive genetic algorithm (AGA) to study ternary Fe$_x$Mg$_y$O$_z$ phases in a wi… ▽ More Fe, Mg, and O are among the most abundant elements in terrestrial planets. While the behavior of the Fe-O, Mg-O, and Fe-Mg binary systems under pressure have been investigated, there are still very few studies of the Fe-Mg-O ternary system at relevant Earth's core and super-Earth's mantle pressures. Here, we use the adaptive genetic algorithm (AGA) to study ternary Fe$_x$Mg$_y$O$_z$ phases in a wide range of stoichiometries at 200 GPa and 350 GPa. We discovered three dynamically stable phases with stoichiometries FeMg$_2$O$_4$, Fe$_2$MgO$_4$, and FeMg$_3$O$_4$ with lower enthalpy than any known combination of Fe-Mg-O high-pressure compounds at 350 GPa. With the discovery of these phases, we construct the Fe-Mg-O ternary convex hull. We further clarify the composition- and pressure-dependence of structural motifs with the analysis of the AGA-found stable and metastable structures. Analysis of binary and ternary stable phases suggest that O, Mg, or both could stabilize a BCC iron alloy at inner core pressures. △ Less

Submitted 5 February, 2021; originally announced February 2021.

Comments: 9 pages, 8 figures

Journal ref: New J. Phys. 23, 063050 (2021)

Adaptive Variational Quantum Imaginary Time Evolution Approach for Ground State Preparation

Authors: Niladri Gomes, Anirban Mukherjee, Feng Zhang, Thomas Iadecola, Cai-Zhuang Wang, Kai-Ming Ho, Peter P. Orth, Yong-Xin Yao

Abstract: An adaptive variational quantum imaginary time evolution (AVQITE) approach is introduced that yields efficient representations of ground states for interacting Hamiltonians on near-term quantum computers. It is based on McLachlan's variational principle applied to imaginary time evolution of variational wave functions. The variational parameters evolve deterministically according to equations of m… ▽ More An adaptive variational quantum imaginary time evolution (AVQITE) approach is introduced that yields efficient representations of ground states for interacting Hamiltonians on near-term quantum computers. It is based on McLachlan's variational principle applied to imaginary time evolution of variational wave functions. The variational parameters evolve deterministically according to equations of motions that minimize the difference to the exact imaginary time evolution, which is quantified by the McLachlan distance. Rather than working with a fixed variational ansatz, where the McLachlan distance is constrained by the quality of the ansatz, the AVQITE method iteratively expands the ansatz along the dynamical path to keep the McLachlan distance below a chosen threshold. This ensures the state is able to follow the quantum imaginary time evolution path in the system Hilbert space rather than in a restricted variational manifold set by a predefined fixed ansatz. AVQITE is used to prepare ground states of H$_4$, H$_2$O and BeH$_2$ molecules, where it yields compact variational ansätze and ground state energies within chemical accuracy. Polynomial scaling of circuit depth with system size is demonstrated through a set of AVQITE calculations of quantum spin models. Finally, it is shown that quantum Lanczos calculations can also be naturally performed alongside AVQITE without additional quantum resource costs. △ Less

Submitted 23 August, 2021; v1 submitted 2 February, 2021; originally announced February 2021.

Comments: 16 pages, 4 figures

Journal ref: Advanced Quantum Technologies (2021)

Optically induced nonreciprocity by a plasmonic pump in semiconductor wires

Authors: Kil-Song Song, Song-Jin Im, Ji-Song Pae, Chol-Song Ri, Kum-Song Ho, Chol-Sun Kim, Yong-Ha Han

Abstract: In most studies on all-optical diodes spatial asymmetry has been by necessity applied to break Lorentz reciprocity. Here we suggest a paradigm for optically induced nonreciprocity in semiconductor wires which are spatially asymmetry-free and provide a very simple and efficient platform for plasmonic devices. An azimuthal magnetic field induced by a plasmonic pump in the semiconductor wire alters t… ▽ More In most studies on all-optical diodes spatial asymmetry has been by necessity applied to break Lorentz reciprocity. Here we suggest a paradigm for optically induced nonreciprocity in semiconductor wires which are spatially asymmetry-free and provide a very simple and efficient platform for plasmonic devices. An azimuthal magnetic field induced by a plasmonic pump in the semiconductor wire alters the material parameters and thus results in a cross-nonlinear modulation of the plasmonic signal. Peculiarly the nonlinear wavenumber shift has opposite signs for forward and backward signals whereas Kerr or Kerr-like nonlinearity does not break Lorentz reciprocity in spatially symmetric structures. This principle may open an avenue towards highly integrated all-optical nonreciprocal devices. △ Less

Submitted 18 January, 2021; originally announced January 2021.

Journal ref: Phys. Rev. B 102, 115435 (2020)

Technique for separating velocity and density contributions in spectroscopic data and its application to studying turbulence and magnetic fields

Authors: Ka Ho Yuen, Ka Wai Ho, Alex Lazarian

Abstract: Based on the theoretical description of Position-Position-Velocity(PPV) statistics in Lazarian & Pogosyan(2000), we introduce a new technique called the Velocity Decomposition Algorithm(VDA) in separating the PPV fluctuations arising from velocity and density fluctuations. Using MHD turbulence simulations, we demonstrate its promise in retrieving the velocity fluctuations from PPV cube in various… ▽ More Based on the theoretical description of Position-Position-Velocity(PPV) statistics in Lazarian & Pogosyan(2000), we introduce a new technique called the Velocity Decomposition Algorithm(VDA) in separating the PPV fluctuations arising from velocity and density fluctuations. Using MHD turbulence simulations, we demonstrate its promise in retrieving the velocity fluctuations from PPV cube in various physical conditions and its prospects in accurately tracing the magnetic field. We find that for localized clouds, the velocity fluctuations are most prominent at the wing part of the spectral line, and they dominate the density fluctuations. The same velocity dominance applies to extended HI regions undergoing galactic rotation. Our numerical experiment demonstrates that velocity channels arising from the cold phase of atomic hydrogen (HI) are still affected by velocity fluctuations at small scales. We apply the VDA to HI GALFA-DR2 data corresponding to the high-velocity cloud HVC186+19-114 and high latitude galactic diffuse HI data. Our study confirms the crucial role of velocity fluctuations in explaining why linear structures are observed within PPV cubes. We discuss the implications of VDA for both magnetic field studies and predicting polarized galactic emission that acts as the foreground for the Cosmic Microwave Background studies. Additionally, we address the controversy related to the filamentary nature of the HI channel maps and explain the importance of velocity fluctuations in the formation of structures in PPV data cubes. VDA will allow astronomers to obtain velocity fluctuations from almost every piece of spectroscopic PPV data and allow direct investigations of the turbulent velocity field in observations. △ Less

Submitted 8 February, 2021; v1 submitted 31 December, 2020; originally announced December 2020.

Comments: 48 pages, 11 sections, 6 appendices, 26 figures in the main text, 7 figures in the appendices. Accepted by ApJ for publication

In-Situ Studies of Stress Environment in Amorphous Solids Using Negatively Charged Nitrogen Vacancy Centers in Nanodiamond

Authors: Kin On Ho, Man Yin Leung, Yiu Yung Pang, King Cho Wong, Ping Him Ng, Sen Yang

Abstract: Amorphous solids, which show characteristic differences from crystals, are common in daily usage. Glasses, gels, and polymers are familiar examples, and polymers are particularly important in terms of their role in construction and crafting. Previous studies have mainly focused on the bulk properties of polymeric products, and the local properties are less discussed. Here, we designed a distinctiv… ▽ More Amorphous solids, which show characteristic differences from crystals, are common in daily usage. Glasses, gels, and polymers are familiar examples, and polymers are particularly important in terms of their role in construction and crafting. Previous studies have mainly focused on the bulk properties of polymeric products, and the local properties are less discussed. Here, we designed a distinctive protocol using the negatively charged nitrogen vacancy center in nanodiamond to study properties inside polymeric products in situ. Choosing the curing of poly dimethylsiloxane and the polymerization of cyanoacrylate as subjects of investigation, we measured the time dependence of local pressure and strain in the materials during the chemical processes. From the measurements, we were able to probe the local shear stress inside the two polymeric substances in situ. By regarding the surprisingly large shear stress as the internal tension, we attempted to provide a microscopic explanation for the ultimate tensile strength of a bulk solid. Our current methodology is applicable to any kind of transparent amorphous solids with the stress in the order of MPa and to the study of in situ properties in nanoscale. With better apparatus, we expect the limit can be pushed to sub-MPa scale. △ Less

Submitted 13 December, 2020; originally announced December 2020.

Journal ref: ACS Appl. Polym. Mater. 2021, 3, 1, 162

Adaptive Variational Quantum Dynamics Simulations

Authors: Yong-Xin Yao, Niladri Gomes, Feng Zhang, Cai-Zhuang Wang, Kai-Ming Ho, Thomas Iadecola, Peter P. Orth

Abstract: We propose a general-purpose, self-adaptive approach to construct variational wavefunction ansätze for highly accurate quantum dynamics simulations based on McLachlan's variational principle. The key idea is to dynamically expand the variational ansatz along the time-evolution path such that the ``McLachlan distance'', which is a measure of the simulation accuracy, remains below a set threshold. W… ▽ More We propose a general-purpose, self-adaptive approach to construct variational wavefunction ansätze for highly accurate quantum dynamics simulations based on McLachlan's variational principle. The key idea is to dynamically expand the variational ansatz along the time-evolution path such that the ``McLachlan distance'', which is a measure of the simulation accuracy, remains below a set threshold. We apply this adaptive variational quantum dynamics simulation (AVQDS) approach to the integrable Lieb-Schultz-Mattis spin chain and the nonintegrable mixed-field Ising model, where it captures both finite-rate and sudden post-quench dynamics with high fidelity. The AVQDS quantum circuits that prepare the time-evolved state are much shallower than those obtained from first-order Trotterization and contain up to two orders of magnitude fewer CNOT gate operations. We envision that a wide range of dynamical simulations of quantum many-body systems on near-term quantum computing devices will be made possible through the AVQDS framework. △ Less

Submitted 11 June, 2021; v1 submitted 1 November, 2020; originally announced November 2020.

Comments: 12 pages, 7 figures

Journal ref: PRX Quantum 2, 030307 (2021)

Short- and medium-range orders in Al90Tb10 glass and their relation to the structures of competing crystalline phases

Authors: L. Tang, Z. J. Yang, T. Q. Wen, K. M. Ho, M. J. Kramer, C. Z. Wang

Abstract: Molecular dynamics simulations using an interatomic potential developed by artificial neural network deep machine learning are performed to study the local structural order in Al90Tb10 metallic glass. We show that more than 80% of the Tb-centered clusters in Al90Tb10 glass have short-range order (SRO) with their 17 first coordination shell atoms stacked in a '3661' or '15551' sequence. Medium-rang… ▽ More Molecular dynamics simulations using an interatomic potential developed by artificial neural network deep machine learning are performed to study the local structural order in Al90Tb10 metallic glass. We show that more than 80% of the Tb-centered clusters in Al90Tb10 glass have short-range order (SRO) with their 17 first coordination shell atoms stacked in a '3661' or '15551' sequence. Medium-range order (MRO) in Bergman-type packing extended out to the second and third coordination shells is also clearly observed. Analysis of the network formed by the '3661' and '15551' clusters show that ~82% of such SRO units share their faces or vertexes, while only ~6% of neighboring SRO pairs are interpenetrating. Such a network topology is consistent with the Bergman-type MRO around the Tb-centers. Moreover, crystal structure searches using genetic algorithm and the neural network interatomic potential reveal several low-energy metastable crystalline structures in the composition range close to Al90Tb10. Some of these crystalline structures have the '3661' SRO while others have the '15551' SRO. While the crystalline structures with the '3661' SRO also exhibit the MRO very similar to that observed in the glass, the ones with the '15551' SRO have very different atomic packing in the second and third shells around the Tb centers from that of the Bergman-type MRO observed in the glassy phase. △ Less

Submitted 27 August, 2020; originally announced August 2020.

Efficient step-merged quantum imaginary time evolution algorithm for quantum chemistry

Authors: Niladri Gomes, Feng Zhang, Noah F. Berthusen, Cai-Zhuang Wang, Kai-Ming Ho, Peter P. Orth, Yongxin Yao

Abstract: We develop a resource efficient step-merged quantum imaginary time evolution approach (smQITE) to solve for the ground state of a Hamiltonian on quantum computers. This heuristic method features a fixed shallow quantum circuit depth along the state evolution path. We use this algorithm to determine binding energy curves of a set of molecules, including H$_2$, H$_4$, H$_6$, LiH, HF, H$_2$O and BeH… ▽ More We develop a resource efficient step-merged quantum imaginary time evolution approach (smQITE) to solve for the ground state of a Hamiltonian on quantum computers. This heuristic method features a fixed shallow quantum circuit depth along the state evolution path. We use this algorithm to determine binding energy curves of a set of molecules, including H$_2$, H$_4$, H$_6$, LiH, HF, H$_2$O and BeH$_2$, and find highly accurate results. The required quantum resources of smQITE calculations can be further reduced by adopting the circuit form of the variational quantum eigensolver (VQE) technique, such as the unitary coupled cluster ansatz. We demonstrate that smQITE achieves a similar computational accuracy as VQE at the same fixed-circuit ansatz, without requiring a generally complicated high-dimensional non-convex optimization. Finally, smQITE calculations are carried out on Rigetti quantum processing units (QPUs), demonstrating that the approach is readily applicable on current noisy intermediate-scale quantum (NISQ) devices. △ Less

Submitted 2 September, 2020; v1 submitted 27 June, 2020; originally announced June 2020.

Comments: 11 pages, 5 figures

Journal ref: J. Chem. Theory Comput. 2020

Gutzwiller Hybrid Quantum-Classical Computing Approach for Correlated Materials

Authors: Yongxin Yao, Feng Zhang, Cai-Zhuang Wang, Kai-Ming Ho, Peter P. Orth

Abstract: Rapid progress in noisy intermediate-scale quantum (NISQ) computing technology has led to the development of novel resource-efficient hybrid quantum-classical algorithms, such as the variational quantum eigensolver (VQE), that can address open challenges in quantum chemistry, physics and material science. Proof-of-principle quantum chemistry simulations for small molecules have been demonstrated o… ▽ More Rapid progress in noisy intermediate-scale quantum (NISQ) computing technology has led to the development of novel resource-efficient hybrid quantum-classical algorithms, such as the variational quantum eigensolver (VQE), that can address open challenges in quantum chemistry, physics and material science. Proof-of-principle quantum chemistry simulations for small molecules have been demonstrated on NISQ devices. While several approaches have been theoretically proposed for correlated materials, NISQ simulations of interacting periodic models on current quantum devices have not yet been demonstrated. Here, we develop a hybrid quantum-classical simulation framework for correlated electron systems based on the Gutzwiller variational embedding approach. We implement this framework on Rigetti quantum processing units (QPUs) and apply it to the periodic Anderson model, which describes a correlated heavy electron band hybridizing with non-interacting conduction electrons. Our simulation results quantitatively reproduce the known ground state quantum phase diagram including metallic, Kondo and Mott insulating phases. This is the first fully self-consistent hybrid quantum-classical simulation of an infinite correlated lattice model executed on QPUs, demonstrating that the Gutzwiller hybrid quantum-classical embedding framework is a powerful approach to simulate correlated materials on NISQ hardware. This benchmark study also puts forth a concrete pathway towards practical quantum advantage on NISQ devices. △ Less

Submitted 8 December, 2020; v1 submitted 9 March, 2020; originally announced March 2020.

Comments: 14 pages, 5 figures

Journal ref: Phys. Rev. Research 3, 013184 (2021)

Development of Interatomic Potential for Al-Tb Alloy by Deep Neural Network Learning Method

Authors: L. Tang, Z. J. Yang, T. Q. Wen, K. M. Ho, M. J. Kramer, C. Z. Wang

Abstract: An interatomic potential for Al-Tb alloy around the composition of Al90Tb10 was developed using the deep neural network (DNN) learning method. The atomic configurations and the corresponding total potential energies and forces on each atom obtained from ab initio molecular dynamics (AIMD) simulations are collected to train a DNN model to construct the interatomic potential for Al-Tb alloy. We show… ▽ More An interatomic potential for Al-Tb alloy around the composition of Al90Tb10 was developed using the deep neural network (DNN) learning method. The atomic configurations and the corresponding total potential energies and forces on each atom obtained from ab initio molecular dynamics (AIMD) simulations are collected to train a DNN model to construct the interatomic potential for Al-Tb alloy. We show the obtained DNN model can well reproduce the energies and forces calculated by AIMD. Molecular dynamics (MD) simulations using the DNN interatomic potential also accurately describe the structural properties of Al90Tb10 liquid, such as the partial pair correlation functions (PPCFs) and the bond angle distributions, in comparison with the results from AIMD. Furthermore, the developed DNN interatomic potential predicts the formation energies of crystalline phases of Al-Tb system with the accuracy comparable to ab initio calculations. The structure factor of Al90Tb10 metallic glass obtained by MD simulation using the developed DNN interatomic potential is also in good agreement with the experimental X-ray diffraction data. △ Less

Submitted 28 March, 2020; v1 submitted 18 January, 2020; originally announced January 2020.

Semi-Analytical Model for Design and Analysis of On-Orbit Servicing Architecture

Authors: Koki Ho, Hai Wang, Paul A. DeTrempe, Tristan Sarton du Jonchay, Kento Tomita

Abstract: Robotic on-orbit servicing (OOS) is expected to be a key technology and concept for future sustainable space exploration. This paper develops a semi-analytical model for OOS systems analysis, responding to the growing needs and ongoing trend of robotic OOS. An OOS infrastructure system is considered whose goal is to provide responsive services to the random failures of a set of customer modular sa… ▽ More Robotic on-orbit servicing (OOS) is expected to be a key technology and concept for future sustainable space exploration. This paper develops a semi-analytical model for OOS systems analysis, responding to the growing needs and ongoing trend of robotic OOS. An OOS infrastructure system is considered whose goal is to provide responsive services to the random failures of a set of customer modular satellites distributed in space (e.g., at the geosynchronous equatorial orbit). The considered OOS architecture is comprised of a servicer that travels and provides module-replacement services to the customer satellites, an on-orbit depot to store the spares, and a series of launch vehicles to replenish the depot. The OOS system performance is analyzed by evaluating the mean waiting time before service completion for a given failure and its relationship with the depot capacity. Leveraging the queueing theory and inventory management methods, the developed semi-analytical model is capable of analyzing the OOS system performance without relying on computationally costly simulations. The effectiveness of the proposed model is demonstrated using a case study compared with simulation results. This paper is expected to provide a critical step to push the research frontier of analytical/semi-analytical models development for complex space systems design. △ Less

Submitted 23 September, 2020; v1 submitted 7 October, 2019; originally announced October 2019.

Comments: 21 pages, 8 figures, Accepted by Journal of Spacecraft and Rockets

Journal ref: Journal of Spacecraft and Rockets, 2020

Satellite Constellation Pattern Optimization for Complex Regional Coverage

Authors: Hang Woon Lee, Seiichi Shimizu, Shoji Yoshikawa, Koki Ho

Abstract: The use of regional coverage satellite constellations is on the rise, urging the need for an optimal constellation design method for complex regional coverage. Traditional constellations are often designed for continuous global coverage, and the few existing regional constellation design methods lead to suboptimal solutions for periodically time-varying or spatially-varying regional coverage requi… ▽ More The use of regional coverage satellite constellations is on the rise, urging the need for an optimal constellation design method for complex regional coverage. Traditional constellations are often designed for continuous global coverage, and the few existing regional constellation design methods lead to suboptimal solutions for periodically time-varying or spatially-varying regional coverage requirements. This paper introduces a new general approach to design an optimal constellation pattern that satisfies such complex regional coverage requirements. To this end, the circular convolution nature of the repeating ground track orbit and common ground track constellation is formalized. This formulation enables a scalable constellation pattern analysis for multiple target areas and with multiple sub-constellations. The formalized circular convolution relationship is first used to derive a baseline constellation pattern design method with the conventional assumption of symmetry. Next, a novel method based on binary integer linear programming is developed, which aims to optimally design a constellation pattern with the minimum number of satellites. This binary integer linear programming method is shown to achieve optimal constellation patterns for general problem settings that the baseline method cannot achieve. Five illustrative examples are analyzed to demonstrate the value of the proposed new approach. △ Less

Submitted 5 October, 2020; v1 submitted 1 October, 2019; originally announced October 2019.

Comments: 47 pages, 23 figures, Journal of Spacecraft and Rockets (Published)

Journal ref: Journal of Spacecraft and Rockets, Vol. 57, No. 6, pp. 1309-1327, 2020

Widely color-temperature low-luminosity-loss electrochromic-tuned white light-emitting diodes

Authors: Yu-Yi Kuo, Chiu-Chang Huang, Wei-Ting Chen, Ting-Hsiang Chang, Hsin-Che Lu, Kuo-Chuan Ho, Chih-Yu Chao

Abstract: Light-emitting diodes (LEDs) are efficient light sources extensively applied in people's daily life nowadays, with profound effect on their psychological and physiological state subtly and deeply. The correlated color temperature (CCT) the eyes perceive is a key parameter, but the CCT tuning technology of LEDs remains in the development stage. In this study, an electrochromic (EC) material is empl… ▽ More Light-emitting diodes (LEDs) are efficient light sources extensively applied in people's daily life nowadays, with profound effect on their psychological and physiological state subtly and deeply. The correlated color temperature (CCT) the eyes perceive is a key parameter, but the CCT tuning technology of LEDs remains in the development stage. In this study, an electrochromic (EC) material is employed in the tuning device, exhibiting a wide CCT tuning range from 3,200 K to 6,900 K, varying almost along the black-body locus. The driving voltage is lower than 2.4 V, with luminosity loss less than 16%. Using the EC materials, the performance of CCT tuning technology is able to be further enhanced. △ Less

Submitted 5 August, 2019; originally announced August 2019.

Concentration tuned tetragonal strain in alloys: application to magnetic anisotropy of FeNi$_{1-x}$Co$_x$

Authors: Aleksander L. Wysocki, Manh Cuong Nguyen, Cai-Zhuang Wang, Kai-Ming Ho, Andrey V. Postnikov, Vladimir P. Antropov

Abstract: We explore an opportunity to induce and control tetragonal distortion in materials. The idea involves formation of a binary alloy from parent compounds having body-centered and face-centered symmetries. The concept is illustrated in the case of FeNi$_{1-x}$Co$_x$ magnetic alloy formed by substitutional doping of the L1$_0$ FeNi magnet with Co. Using electronic structure calculations we demonstrate… ▽ More We explore an opportunity to induce and control tetragonal distortion in materials. The idea involves formation of a binary alloy from parent compounds having body-centered and face-centered symmetries. The concept is illustrated in the case of FeNi$_{1-x}$Co$_x$ magnetic alloy formed by substitutional doping of the L1$_0$ FeNi magnet with Co. Using electronic structure calculations we demonstrate that the tetragonal strain in this system can be controlled by concentration and it reaches maximum for $x=0.5$. This finding is then applied to create a large magnetocrystalline anisotropy (MAE) in FeNi$_{1-x}$Co$_x$ system by considering an interplay of the tetragonal distortion with electronic concentration and chemical anisotropy. In particular, we identify a new ordered FeNi$_{0.5}$Co$_{0.5}$ system with MAE larger by a factor 4.5 from the L1$_0$ FeNi magnet. △ Less

Submitted 26 June, 2019; originally announced June 2019.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. B 100, 104429 (2019)

Temperature dependence of the solid-liquid interface free energy of Ni and Al from molecular dynamics simulation of nucleation

Authors: Yang Sun, Feng Zhang, Huajing Song, Mikhail I. Mendelev, Cai-Zhuang Wang, Kai-Ming Ho

Abstract: The temperature dependence of the solid-liquid interfacial free energy, γ, is investigated for Al and Ni at the undercooled temperature regime based on a recently developed persistent-embryo method. The atomistic description of the nucleus shape is obtained from molecular dynamics simulations. The computed γ shows a linear dependence on the temperature. The values of γ extrapolated to the melting… ▽ More The temperature dependence of the solid-liquid interfacial free energy, γ, is investigated for Al and Ni at the undercooled temperature regime based on a recently developed persistent-embryo method. The atomistic description of the nucleus shape is obtained from molecular dynamics simulations. The computed γ shows a linear dependence on the temperature. The values of γ extrapolated to the melting temperature agree well with previous data obtained by the capillary fluctuation method. Using the temperature dependence of γ, we estimate the nucleation free energy barrier in a wide temperature range from the classical nucleation theory. The obtained data agree very well with the results from the brute-force molecular dynamics simulations. △ Less

Submitted 27 October, 2018; originally announced October 2018.

Journal ref: J. Chem. Phys. 149, 174501 (2018)

All-optical magnetization switching by two-frequency pulses using the plasmon-induced inverse Faraday effect in a magneto-plasmonic structure

Authors: Song-Jin Im, Ji-Song Pae, Chol-Song Ri, Kum-Song Ho, Joachim Herrmann

Abstract: In this Letter we study the generation of quasi-static magnetic fields by the plasmon-induced inverse Faraday effect and propose a magneto-optical waveguide structure for achieving magnetization switching at sub-ps time in a nano-confined magneto-optical structure. In particular we show that the direction of the generated quasi-static field in a magneto-optical dielectric cavity side-coupled to a… ▽ More In this Letter we study the generation of quasi-static magnetic fields by the plasmon-induced inverse Faraday effect and propose a magneto-optical waveguide structure for achieving magnetization switching at sub-ps time in a nano-confined magneto-optical structure. In particular we show that the direction of the generated quasi-static field in a magneto-optical dielectric cavity side-coupled to a metal-insulator-metal (MIM) waveguide depends sensitively on the wavelength of the surface plasmon polaritions (SPP). This phenomenon could open up a new energy-efficient ultrafast method for nano-confined all-optical magnetization switching by two-frequency pulses. △ Less

Submitted 31 July, 2018; originally announced August 2018.

Journal ref: Phys. Rev. B 99, 041401 (2019)

Ultracompact high-contrast magneto-optical disk resonator side-coupled to a plasmonic waveguide and switchable by an external magnetic field

Authors: Ji-Song Pae, Song-Jin Im, Kum-Song Ho, Chol-Song Ri, Sok-Bong Ro, Joachim Herrmann

Abstract: Here we propose and study a novel type of plasmonic resonators based on a metal-insulator-metal waveguide and a side-coupled magneto-optical disk controlled by an external magnetic field. The wavenumber change and the transmission of surface-plasmon-polaritons (SPPs) can be tuned by altering the magnetic field and reversible on/off switching of the running SPP modes by a reversal of the direction… ▽ More Here we propose and study a novel type of plasmonic resonators based on a metal-insulator-metal waveguide and a side-coupled magneto-optical disk controlled by an external magnetic field. The wavenumber change and the transmission of surface-plasmon-polaritons (SPPs) can be tuned by altering the magnetic field and reversible on/off switching of the running SPP modes by a reversal of the direction of the external magnetic field is demonstrated. Resonant enhancement of the magneto-plasmonic modulation by more than 200 times leads to a modulation contrast ratio more than tenfold ratio (90-\%-modulation) keeping a moderate insertion loss within an optical bandwidth of hundreds of GHz. Numerical simulations confirm the predictions by the derived analytical formulas of a high-contrast magneto-plasmonic modulation by the submicron ultra-small disk resonator. △ Less

Submitted 31 July, 2018; originally announced August 2018.

Journal ref: Phys. Rev. B 98, 041406(R), 2018

Switchable plasmonic routers controlled by external magnetic fields by using magneto-plasmonic waveguides

Authors: Kum-Song Ho, Song-Jin Im, Ji-Song Pae, Chol-Song Ri, Yong-Ha Han, Joachim Herrmann

Abstract: We analytically and numerically investigate magneto-plasmons in metal films surrounded by a ferromagnetic dielectric. In such waveguide using a metal film with a thickness exceeding the Skin depth, an external magnetic field in the transverse direction can induce a significant spatial asymmetry of mode distribution. Superposition of the odd and the even asymmetric modes over a distance leads to a… ▽ More We analytically and numerically investigate magneto-plasmons in metal films surrounded by a ferromagnetic dielectric. In such waveguide using a metal film with a thickness exceeding the Skin depth, an external magnetic field in the transverse direction can induce a significant spatial asymmetry of mode distribution. Superposition of the odd and the even asymmetric modes over a distance leads to a concentration of the energy on one interface which is switched to the other interface by the magnetic field reversal. The requested magnitude of magnetization is exponentially reduced with the increase of the metal film thickness. Based on this phenomenon, we propose a waveguide-integrated magnetically controlled switchable plasmonic routers with 99-%-high contrast within the optical bandwidth of tens of THz. This configuration can also operate as a magneto-plasmonic modulator. △ Less

Submitted 17 July, 2018; originally announced July 2018.

Journal ref: Scientific Reports volume 8, Article number: 10584 (2018)

Third-order nonlinearity by the inverse Faraday effect in planar magnetoplasmonic structures

Authors: Song-Jin Im, Chol-Song Ri, Kum-Song Ho, Joachim Herrmann

Abstract: We predict a new type of ultrafast third-order nonlinearity of surface plasmon polaritons (SPP) in planar magneto-plasmonic structures caused by the inverse Faraday effect (IFE). Planar SPPs with a significant longitudinal component of the electric field act via the IFE as an effective transverse magnetic field. Its response to the plasmon propagation leads to strong ultrafast self-action which ma… ▽ More We predict a new type of ultrafast third-order nonlinearity of surface plasmon polaritons (SPP) in planar magneto-plasmonic structures caused by the inverse Faraday effect (IFE). Planar SPPs with a significant longitudinal component of the electric field act via the IFE as an effective transverse magnetic field. Its response to the plasmon propagation leads to strong ultrafast self-action which manifests itself through a third-order nonlinearity. We derive a general formula and analytical expressions for the IFE-related nonlinear susceptibility for two specific planar magneto-plasmonic structures from the Lorentz reciprocity theorem. Our estimations predict a very large nonlinear third-order nonlinear susceptibility exceeding those of typical metals such as gold. △ Less

Submitted 17 July, 2018; originally announced July 2018.

Journal ref: Phys. Rev. B 96, 165437, 2017

Optimal Satellite Constellation Spare Strategy Using Multi-Echelon Inventory Control

Authors: Pauline C. M. Jakob, Seiichi Shimizu, Shoji Yoshikawa, Koki Ho

Abstract: The recent growing trend to develop large-scale satellite constellations (i.e., mega-constellation) with low-cost small satellites has brought the need for an efficient and scalable maintenance strategy decision plan. Traditional spare strategies for satellite constellations cannot handle these mega-constellations due to their limited scalability in number of satellites and/or frequency of failure… ▽ More The recent growing trend to develop large-scale satellite constellations (i.e., mega-constellation) with low-cost small satellites has brought the need for an efficient and scalable maintenance strategy decision plan. Traditional spare strategies for satellite constellations cannot handle these mega-constellations due to their limited scalability in number of satellites and/or frequency of failures. In this paper, we propose a novel spare strategy using an inventory management approach. We consider a set of parking orbits at a lower altitude than the constellation for spare storage, and model satellite constellation spare strategy problem using a multi-echelon (s,Q)-type inventory policy, viewing Earth's ground as a supplier, parking orbits as warehouses, and in-plane spare stocks as retailers. This inventory model is unique in that the parking orbits (warehouses) drift away from the orbital planes over time due to orbital mechanics' effects, and the in-plane spare stocks (retailers) would receive the resupply from the closest (i.e., minimum waiting time) available warehouse at the time of delivery. The parking orbits (warehouses) are also resupplied from the ground (supplier) with stochastic lead time caused by the order processing and launch opportunities, leveraging the cost saving effects by launching many satellites in one rocket (i.e., batch launch discount). The proposed analytical model is validated against simulations using Latin Hypercube Sampling. Furthermore, based on the proposed model, an optimization formulation is introduced to identify the optimal spare strategy, comprising the parking orbits characteristics and all locations policies, to minimize the maintenance cost of the system given performance requirements. The proposed model and optimization method are applied to a real-world case study of satellite mega-constellation to demonstrate their value. △ Less

Submitted 5 June, 2019; v1 submitted 7 July, 2018; originally announced July 2018.

Comments: 32 pages, 7 figures, Published

Journal ref: Journal of Spacecraft and Rockets, Vol. 56, No. 5, pp. 1449-1461, 2019

Phase transitions in MgSiO3 post-perovskite in super-Earth mantles

Authors: Koichiro Umemoto, Renata M. Wentzcovitch, Shunqing Wu, Min Ji, Cai-Zhuang Wang, Kai-Ming Ho

Abstract: The highest pressure form of the major Earth-forming mantle silicate is MgSiO3 post-perovskite (PPv). Understanding the fate of PPv at TPa pressures is the first step for understanding the mineralogy of super-Earths-type exoplanets, arguably the most interesting for their similarities with Earth. Modeling their internal structure requires knowledge of stable mineral phases, their properties under… ▽ More The highest pressure form of the major Earth-forming mantle silicate is MgSiO3 post-perovskite (PPv). Understanding the fate of PPv at TPa pressures is the first step for understanding the mineralogy of super-Earths-type exoplanets, arguably the most interesting for their similarities with Earth. Modeling their internal structure requires knowledge of stable mineral phases, their properties under compression, and major element abundances. Several studies of PPv under extreme pressures support the notion that a sequence of pressure induced dissociation transitions produce the elementary oxides SiO2 and MgO as the ultimate aggregation form at ~3 TPa. However, none of these studies have addressed the problem of mantle composition, particularly major element abundances usually expressed in terms of three main variables, the Mg/Si and Fe/Si ratios and the Mg#, as in the Earth. Here we show that the critical compositional parameter, the Mg/Si ratio, whose value in the Earth's mantle is still debated, is a vital ingredient for modeling phase transitions and internal structure of super-Earth mantles. Specifically, we have identified new sequences of phase transformations, including new recombination reactions that depend decisively on this ratio. This is a new level of complexity that has not been previously addressed, but proves essential for modeling the nature and number of internal layers in these rocky mantles. △ Less

Submitted 16 August, 2017; originally announced August 2017.

Comments: Submitted to Earth Planet. Sci. Lett., 28 pages, 6 figures

Future of Flexible Robotic Endoscopy Systems

Authors: Tian En Timothy Seah, Thanh Nho Do, Nobuyoshi Takeshita, Khek Yu Ho, Soo Jay Phee

Abstract: Robotics enables a variety of unconventional actuation strategies to be used for endoscopes, resulting in reduced trauma to the GI tract. For transmission of force to distally mounted endoscopic instruments, robotically actuated tendon sheath mechanisms are the current state of the art. Robotics in surgical endoscopy enables an ergonomic mapping of the surgeon movements to remotely controlled slav… ▽ More Robotics enables a variety of unconventional actuation strategies to be used for endoscopes, resulting in reduced trauma to the GI tract. For transmission of force to distally mounted endoscopic instruments, robotically actuated tendon sheath mechanisms are the current state of the art. Robotics in surgical endoscopy enables an ergonomic mapping of the surgeon movements to remotely controlled slave arms, facilitating tissue manipulation. The learning curve for difficult procedures such as endoscopic submucosal dissection and full-thickness resection can be significantly reduced. Improved surgical outcomes are also observed from clinical and pre-clinical trials. The technology behind master-slave surgical robotics will continue to mature, with the addition of position and force sensors enabling better control and tactile feedback. More robotic assisted GI luminal and NOTES surgeries are expected to be conducted in future, and gastroenterologists will have a key collaborative role to play. △ Less

Submitted 15 March, 2017; originally announced March 2017.

Comments: 24 pages, 23 figures

Robust diamond-like Fe-Si network in the zero-strain NaxFeSiO4 Cathode

Authors: Z. Ye, X. Zhao, S. D. Li, S. Q. Wu, P. Wu, M. C. Nguyen, J. H. Guo, J. X. Mi, Z. L. Gong, Z. Z. Zhu, Y. Yang, C. Z. Wang, K. M. Ho

Abstract: Sodium orthosilicates Na2MSiO4 (M denotes transition metals) have attracted much attention due to the possibility of exchanging two electrons per formula unit. In this work, we report a group of sodium iron orthosilicates Na2FeSiO4, the crystal structures of which are characterized by a diamond-like Fe-Si network. The Fe-Si network is quite robust against the charge/discharge process, which explai… ▽ More Sodium orthosilicates Na2MSiO4 (M denotes transition metals) have attracted much attention due to the possibility of exchanging two electrons per formula unit. In this work, we report a group of sodium iron orthosilicates Na2FeSiO4, the crystal structures of which are characterized by a diamond-like Fe-Si network. The Fe-Si network is quite robust against the charge/discharge process, which explains the high structural stability observed in experiment. Using the density functional theory within the GGA+U framework and X-ray diffraction studies, the crystal structures and structural stabilities during the sodium insertion/deinsertion process are systematically investigated. The calculated average deintercalation voltages are in good agreement with the experimental result. △ Less

Submitted 10 December, 2015; originally announced December 2015.

Comments: 14 pages, 8 figures

Critical nuclear charge and shape resonances for the two-electron systems

Authors: Zong-Chao Yan, Yew Kam Ho

Abstract: The hydrogen negative ion H$^-$ is the simplest two-electron system that exists in nature. This system is not only important in astrophysics but it also serves as an ideal ground to study electron-electron correlations. The peculiar balance of the correlations between the two electrons with the interaction of electron-nucleus in H$^-$ makes this system to have only two bound states, one being the… ▽ More The hydrogen negative ion H$^-$ is the simplest two-electron system that exists in nature. This system is not only important in astrophysics but it also serves as an ideal ground to study electron-electron correlations. The peculiar balance of the correlations between the two electrons with the interaction of electron-nucleus in H$^-$ makes this system to have only two bound states, one being the ground state $1s^2\,^{1}\!S^e$ and the other the doubly-excited metastable state $2p^2\,^{3}\!P^e$ embedded below the hydrogen $n=2$ threshold. Here we report a calculation for the $2p^2\,^{3}\!P^e$ state of H$^-$ that yields the energy eigenvalue $E=-0.125\,355\,451\,242\,864\,058\,376\,012\,313\,25(2)$, in atomic units. Our result substantially improves the best available result by 16 orders of magnitude. We further study the critical nuclear charge $Z_{\rm cr}$, the minimum value of nuclear charge $Z$ that is required to bind a nucleus and two electrons. Our determination of $Z_{\rm cr}$ for the $2p^2\,^{3}\!P^e$ state of two-electron systems is $Z_{\rm cr}=0.994\,781\,292\,240\,366\,246\,3(1)$, corresponding to $1/Z_{\rm cr}= 1.005\,246\,085\,546\,985\,509\,4(1)$, which improves the best published value of $Z_{\rm cr}$ by about 10 orders of magnitude. We further investigate in a definitive way the unexplored regime of $Z < Z_{\rm cr}$ using the method of complex scaling and establish precise shape resonance poles for the state of $2p^2\,^{3}\!P^e$ in the complex energy plane. △ Less

Submitted 22 June, 2015; originally announced June 2015.