-
Direct numerical simulation of transition under free-stream turbulence and the influence of large integral length scales
Authors:
Kristina Đurović,
Ardeshir Hanifi,
Philipp Schlatter,
Kenzo Sasaki,
Dan S. Henningson
Abstract:
Under action of free-stream turbulence (FST), elongated streamwise streaky structures are generated inside the boundary layer, and their amplitude and wavelength are crucial for the transition onset. While turbulence intensity is strongly correlated with the transitional Reynolds number, characteristic length scales of the FST are often considered to have a slight impact on the transition location…
▽ More
Under action of free-stream turbulence (FST), elongated streamwise streaky structures are generated inside the boundary layer, and their amplitude and wavelength are crucial for the transition onset. While turbulence intensity is strongly correlated with the transitional Reynolds number, characteristic length scales of the FST are often considered to have a slight impact on the transition location. However, a recent experiment by Fransson & Shahinfar (2020} shows significant effects of FST scales. They found that, for higher free-stream turbulence levels and larger integral length scales, an increase in the length scale postpones transition, contrary to established literature. Here, we aim at understanding these results by performing a series of high-fidelity simulations. These results provide understanding why the FST integral length scale affects the transition location differently. These integral length scales are so large that the wide streaks introduced in the boundary layer have substantially lower growth in the laminar region upstream of the transition to turbulence, than streaks induced by smaller integral length scales. The energy in the boundary layer subsequently propagate to smaller spanwise scales as a result of the non-linear interaction. When the energy has reached smaller spanwise scales larger amplitude streaks results in regions where the streak growth are larger. It takes longer for the energy from the wider streaks to propagate to the spanwise scales associated with the breakdown to turbulence, than for the those with smaller spanwise scales. Thus there is a faster transition for FST with lower integral length scales in this case.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Linear and nonlinear receptivity mechanisms in boundary layers subject to free-stream turbulence
Authors:
Diego C. P. Blanco,
Ardeshir Hanifi,
Dan S. Henningson,
André V. G. Cavalieri
Abstract:
Large-eddy simulations of a flat-plate boundary layer, without a leading edge, subject to multiple levels of incoming free stream turbulence are considered in the present work. Within an input-output model where non-linear terms of the incompressible Navier-Stokes equations are treated as an external forcing, we manage to separate inputs related to perturbations coming through the intake of the nu…
▽ More
Large-eddy simulations of a flat-plate boundary layer, without a leading edge, subject to multiple levels of incoming free stream turbulence are considered in the present work. Within an input-output model where non-linear terms of the incompressible Navier-Stokes equations are treated as an external forcing, we manage to separate inputs related to perturbations coming through the intake of the numerical domain, whose evolution represents a linear mechanism, and the volumetric non-linear forcing due to triadic interactions. With these, we perform the full reconstruction of the statistics of the flow, as measured in the simulations, to quantify pairs of wavenumbers and frequencies more affected by either linear or non-linear receptivity mechanisms. Inside the boundary layer, different wavenumbers at near-zero frequency reveal streaky structures. Those that are amplified predominantly via linear interactions with the incoming vorticity occur upstream and display transient growth, while those generated by the non-linear forcing are the most energetic and appear in more downstream positions. The latter feature vortices growing proportionally to the laminar boundary layer thickness, along with a velocity profile that agrees with the optimal amplification obtained by linear transient growth theory. The numerical approach presented is general and could potentially be extended to any simulation for which receptivity to incoming perturbations needs to be assessed.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Numerical investigation of the boundary layer stability on a section of a rotating wind turbine blade
Authors:
Thales Coelho Leite Fava,
Dan Henningson,
Ardeshir Hanifi
Abstract:
Laminar-turbulent transition on a rotating wind turbine blade at a chord Reynolds number of $1 \times 10^5$ and varying angles of attack ($AoA$) is studied with direct numerical simulations and linear stability theory. The rotation effects depend on the streamwise pressure gradient and direct/reverse flow state. In the $AoA=12.8^\circ$ case, rotation retards the flow in the laminar separation bubb…
▽ More
Laminar-turbulent transition on a rotating wind turbine blade at a chord Reynolds number of $1 \times 10^5$ and varying angles of attack ($AoA$) is studied with direct numerical simulations and linear stability theory. The rotation effects depend on the streamwise pressure gradient and direct/reverse flow state. In the $AoA=12.8^\circ$ case, rotation retards the flow in the laminar separation bubble (LSB) and renders the mixed Tollmien-Schlichting/Kelvin-Helmholtz (TS/KH) instability more unstable. Rotation fosters an oblique secondary instability mechanism, rapidly breaking the KH rolls into small-scale turbulence. A sub-harmonic mechanism is dominant in the non-rotating case, retarding transition. However, rotation accelerates the boundary layer upstream of separation, subject to a strong adverse pressure gradient (APG), stabilizing TS waves and delaying transition in $3\%$ and reattachment in $4\%$. In the $AoA=4.2^\circ$ and $AoA=1.2^\circ$ cases, rotation decelerates the flow upstream of separation, subject to a favorable pressure gradient (FPG), which makes TS waves more unstable. Nonetheless, rotation accelerates the separated flow, partially stabilizing the KH mechanism. Rotation further promotes the appearance of inflectional crossflow velocity profiles that triggers stationary and traveling crossflow modes. These modes are less unstable than the TS/KH mechanism of the separated shear layer but lead to the formation of coherent spanwise-velocity structures. For $AoA=4.2^\circ$, rotation strengthens the sub-harmonic secondary instability mechanism in the rotating case over the oblique one under no rotation. For $AoA=1.2^\circ$, the sub-harmonic mechanism is dominant regardless of rotation. Notice that the transition location is not changed by rotation in the $AoA=4.2^\circ$ and $AoA=1.2^\circ$ cases. Finally, rotation stabilizes the absolute instability found in these cases.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Instability of the optimal edge trajectory in the Blasius boundary layer
Authors:
Miguel Beneitez,
Yohann Duguet,
Philipp Schlatter,
Dan S. Henningson
Abstract:
In the context of linear stability analysis, considering unsteady base flows is notoriously difficult. A generalisation of modal linear stability analysis, allowing for arbitrarily unsteady base flows over a finite time, is therefore required. The recently developed optimally time-dependent (OTD) modes form a projection basis for the tangent space. They capture the leading amplification directions…
▽ More
In the context of linear stability analysis, considering unsteady base flows is notoriously difficult. A generalisation of modal linear stability analysis, allowing for arbitrarily unsteady base flows over a finite time, is therefore required. The recently developed optimally time-dependent (OTD) modes form a projection basis for the tangent space. They capture the leading amplification directions in state space under the constraint that they form an orthonormal basis at all times. The present numerical study illustrates the possibility to describe a complex flow case using the leading OTD modes. The flow under investigation is an unsteady case of the Blasius boundary layer, featuring streamwise streaks of finite length and relevant to bypass transition. It corresponds to the state space trajectory initiated by the minimal seed; such a trajectory is unsteady, free from any spatial symmetry, and shadows the laminar-turbulent separatrix for a finite time only. The finite-time instability of this unsteady base flow is investigated using the 8 leading OTD modes. The analysis includes the computation of finite-time Lyapunov exponents as well as instantaneous eigenvalues, and of the associated flow structures. The reconstructed instantaneous eigenmodes are all of outer type. They map unambiguously the spatial regions of largest instantaneous growth. Other flow structures, previously reported as secondary, are identified with this method as relevant to streak switching and to streamwise vortical ejections. The dynamics inside the tangent space features both modal and non-modal amplification. Non-normality within the reduced tangent subspace, quantified by the instantaneous numerical abscissa, emerges only as the unsteadiness of the base flow is reduced.
△ Less
Submitted 15 June, 2023;
originally announced June 2023.
-
Simulating Airplane Aerodynamics with Body Forces: Actuator Line Method for Non-planar Wings
Authors:
Vitor G. Kleine,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
Two configurations typical of fixed-wing aircraft are simulated with the actuator line method (ALM): a wing with winglets and a T-tail. The ALM is extensively used in rotor simulations to model the blades by body forces, which are calculated from airfoil data and the relative flow velocity. This method has not been used to simulate airplane aerodynamics, despite its advantage of allowing coarser g…
▽ More
Two configurations typical of fixed-wing aircraft are simulated with the actuator line method (ALM): a wing with winglets and a T-tail. The ALM is extensively used in rotor simulations to model the blades by body forces, which are calculated from airfoil data and the relative flow velocity. This method has not been used to simulate airplane aerodynamics, despite its advantage of allowing coarser grids. This may be credited to the failure of the uncorrected ALM to accurately predict forces near the tip of wings, even for simple configurations. The recently-proposed vortex-based smearing correction shows improved results, suggesting those limitations are part of the past. For the non-planar configurations studied in this work, differences between the ALM with the original smearing correction and a non-linear lifting line method (LL) are observed near the intersection of surfaces, because the circulation generated in the numerical simulation differs from the calculated corrected circulation. A vorticity magnitude correction is proposed, which improves the agreement between ALM and LL. This second-order correction resolves the ambiguity in the velocity used to define the lift force. The good results indicate that the improved ALM can be used for airplane aerodynamics, with an accuracy similar to the LL.
△ Less
Submitted 18 March, 2023; v1 submitted 31 August, 2022;
originally announced September 2022.
-
Non-iterative vortex-based smearing correction for the actuator line method
Authors:
Vitor G. Kleine,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
The actuator line method (ALM) is extensively used in wind turbine and rotor simulations. However, its original uncorrected formulation overestimates the forces near the tip of the blades and does not reproduce well forces on translating wings. The recently proposed vortex-based smearing correction for the ALM is a correction based on physical and mathematical properties of the simulation that all…
▽ More
The actuator line method (ALM) is extensively used in wind turbine and rotor simulations. However, its original uncorrected formulation overestimates the forces near the tip of the blades and does not reproduce well forces on translating wings. The recently proposed vortex-based smearing correction for the ALM is a correction based on physical and mathematical properties of the simulation that allows for a more accurate and general ALM. So far, to correct the forces on the blades, the smearing correction depended on an iterative process at every time step, which is usually slower, less stable and less deterministic than direct methods. In this work, a non-iterative process is proposed and validated. First, we propose a formulation of the non-linear lifting line that is equivalent to the ALM with smearing correction, showing that their results are practically identical for a translating wing. Then, by linearizing the lifting line method, the iterative process of the correction is substituted by the direct solution of a small linear system. No significant difference is observed in the results of the iterative and non-iterative corrections, both in wing and rotor simulations. Additional contributions of the present work include the use of a more accurate approximation for the velocity induced by a smeared vortex segment and the implementation of a free-vortex wake model to define the vortex sheet, that contribute to the accuracy and generality of the method. The results present here may motivate the adoption of the ALM by other communities, for example, in fixed-wing applications.
△ Less
Submitted 18 March, 2023; v1 submitted 11 June, 2022;
originally announced June 2022.
-
The Stability of Wakes of Floating Wind Turbines
Authors:
Vitor G. Kleine,
Lucas Franceschini,
Bruno S. Carmo,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
Floating offshore wind turbines (FOWTs) are subjected to platform motion induced by wind and wave loads. The oscillatory movement trigger vortex instabilities, modifying the wake structure, influencing the flow reaching downstream wind turbines. In this work, the wake of a FOWT is analysed by means of numerical simulations and comparison with linear stability theory. Two simplified models based on…
▽ More
Floating offshore wind turbines (FOWTs) are subjected to platform motion induced by wind and wave loads. The oscillatory movement trigger vortex instabilities, modifying the wake structure, influencing the flow reaching downstream wind turbines. In this work, the wake of a FOWT is analysed by means of numerical simulations and comparison with linear stability theory. Two simplified models based on the stability of vortices are developed for all degrees of freedom of turbine motion. In our numerical simulations, the wind turbine blades are modeled as actuator lines and a spectral-element method with low dispersion and dissipation is employed to study the evolution of the perturbations. The turbine motion excites vortex instability modes predicted by the linear stability of helical vortices. The flow structures that are formed in the non-linear regime are a consequence of the growth of these modes and preserve some of the characteristics that can be explained and predicted by the linear theory. The number of vortices that interact and the growth rate of disturbances are well predicted by a simple stability model of a two-dimensional row of vortices. For all types of motion, the highest growth rate is observed when the frequency of motion is one and a half the frequency of rotation of the turbine; that induces the out-of-phase vortex pairing mechanism. For lower frequencies of motion, several vortices coalesce to form large flow structures, which cause high amplitude of oscillations in the streamwise velocities, that may increase fatigue or induce high amplitude motion on downstream turbines.
△ Less
Submitted 9 June, 2022; v1 submitted 22 March, 2022;
originally announced March 2022.
-
Stability of Two-dimensional Potential Flows Using Bicomplex Numbers
Authors:
Vitor G. Kleine,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
The use of the complex velocity potential and the complex velocity is widely disseminated in the study of two-dimensional incompressible potential flows. The advantages of working with complex analytical functions made this representation of the flow ubiquitous in the field of theoretical aerodynamics. However, this representation is not usually employed in linear stability studies, where the repr…
▽ More
The use of the complex velocity potential and the complex velocity is widely disseminated in the study of two-dimensional incompressible potential flows. The advantages of working with complex analytical functions made this representation of the flow ubiquitous in the field of theoretical aerodynamics. However, this representation is not usually employed in linear stability studies, where the representation of the velocity as real vectors is preferred by most authors, in order to allow the representation of the perturbation as the complex exponential function. Some of the classical attempts to use the complex velocity potential in stability studies suffer from formal errors. In this work, we present a framework that reconciles these two complex representations using bicomplex numbers. This framework is applied to the stability of the von Kármán vortex street and a generalized formula is found. It is shown that the classical results of the symmetric and staggered von Kármán vortex streets are just particular cases of the generalized dynamical system in bicomplex formulation.
△ Less
Submitted 2 May, 2022; v1 submitted 11 March, 2022;
originally announced March 2022.
-
A model for the collapse of the edge when two transitions routes compete
Authors:
Miguel Beneitez,
Yohann Duguet,
Dan S. Henningson
Abstract:
The transition to turbulence in many shear flows proceeds along two competing routes, one linked with finite-amplitude disturbances and the other one originating from a linear instability, as in e.g. boundary layer flows. The dynamical systems concept of edge manifold has been suggested in the subcritical case to explain the partition of the state space of the system. This investigation is devoted…
▽ More
The transition to turbulence in many shear flows proceeds along two competing routes, one linked with finite-amplitude disturbances and the other one originating from a linear instability, as in e.g. boundary layer flows. The dynamical systems concept of edge manifold has been suggested in the subcritical case to explain the partition of the state space of the system. This investigation is devoted to the evolution of the edge manifold when a linear stability is added in such subcritical systems, a situation poorly studied despite its prevalence in realistic fluid flows. In particular the fate of the edge state as a mediator of transition is unclear. A deterministic three-dimensional model is suggested, parametrised by the linear instability growth rate. The edge manifold evolves topologically, via a global saddle-loop bifurcation, from the separatrix between two attraction basins to the mediator between two transition routes. For larger instability rates, the stable manifold of the saddle point increases in codimension from 1 to 2 after an additional local saddle node bifurcation, causing the collapse of the edge manifold. As the growth rate is increased, three different regimes of this model are identified, each one associated with a flow case from the recent hydrodynamic literature. A simple nonautonomous generalisation of the model is also suggested in order to capture the complexity of spatially developing flows.
△ Less
Submitted 22 May, 2020;
originally announced May 2020.
-
SPOD and resolvent analysis of near-wall coherent structures in turbulent pipe flows
Authors:
Leandra Abreu,
André Cavalieri,
Philipp Schlatter,
Ricardo Vinuesa,
Dan Henningson
Abstract:
Direct numerical simulations, performed with a high-order spectral-element method, are used to study coherent structures in turbulent pipe flow at friction Reynolds numbers $Re_τ = 180$ and $550$. The database was analysed using spectral proper orthogonal decomposition (SPOD) to identify energetically dominant coherent structures, most of which turn out to be streaks and quasi-streamwise vortices.…
▽ More
Direct numerical simulations, performed with a high-order spectral-element method, are used to study coherent structures in turbulent pipe flow at friction Reynolds numbers $Re_τ = 180$ and $550$. The database was analysed using spectral proper orthogonal decomposition (SPOD) to identify energetically dominant coherent structures, most of which turn out to be streaks and quasi-streamwise vortices. To understand how such structures can be modelled, the linear flow responses to harmonic forcing were computed using the singular value decomposition of the resolvent operator, using the mean field as a base flow. The SPOD and resolvent analysis were calculated for several combinations of frequencies and wavenumbers, allowing to map out the similarities between SPOD modes and optimal responses for a wide range of relevant scales in turbulent pipe flows. In order to explore physical reasons behind the agreement between both methods, an indicator of lift-up mechanism in the resolvent analysis was introduced, activated when optimal forcing represents quasi-streamwise vortices and associated response corresponds to streaks. Good agreement between leading SPOD and resolvent modes is observed in a large region of parameter space. In this region, a significant gain separation is found in resolvent analysis, which may be attributed to the strong amplification associated with the lift-up mechanism. For both Reynolds numbers, the observed concordances were generally for structures with large energy in the buffer layer. The results highlight resolvent analysis as a pertinent reduced-order model for coherent structures in wall-bounded turbulence, particularly for streamwise elongated structures corresponding to near-wall streamwise vortices and streaks.
△ Less
Submitted 23 April, 2020;
originally announced April 2020.
-
The colour of forcing statistics in resolvent analyses of turbulent channel flows
Authors:
Pierluigi Morra,
Petronio A. S. Nogueira,
André V. G. Cavalieri,
Dan S. Henningson
Abstract:
The cross-spectral density (CSD) of the non-linear forcing in resolvent analyses is here quantified for the first time for turbulent channel flows. Direct numerical simulations (DNS) at $Re_τ =179$ and $Re_τ =543$ are performed. The CSDs are computed for highly energetic structures typical of buffer-layer and large-scale motions, for different temporal frequencies. The CSD of the non-linear forcin…
▽ More
The cross-spectral density (CSD) of the non-linear forcing in resolvent analyses is here quantified for the first time for turbulent channel flows. Direct numerical simulations (DNS) at $Re_τ =179$ and $Re_τ =543$ are performed. The CSDs are computed for highly energetic structures typical of buffer-layer and large-scale motions, for different temporal frequencies. The CSD of the non-linear forcing is shown not to be uncorrelated (white) in space, which implies the forcing is structured. Since the non-linear forcing is non-solenoidal by construction and the velocity of an incompressible flow is affected only by the solenoidal part of the forcing, this solenoidal part is evaluated. It is shown that the solenoidal part of the non-linear forcing is the combination of oblique streamwise vortices and a streamwise component which counteract each other, as in a destructive interference. It is shown that a rank-2 approximation of the forcing, with only the most energetic SPOD (spectral proper orthogonal decomposition) modes, leads to the bulk of the response. The projections of the non-linear forcing onto the right-singular vectors of the resolvent are evaluated. The left-singular vectors of the resolvent associated with very low-magnitude singular values are non-negligible since the non-linear forcing term has a non-negligible projection onto the linear sub-optimals of resolvent analysis. The same projections are computed when the forcing is modelled with an eddy-viscosity approach. It is clarified that this modelling improves the accuracy of the prediction since the projections are closer to those associated with the non-linear forcing from DNS data.
△ Less
Submitted 3 April, 2020;
originally announced April 2020.
-
The edge as a Lagrangian Coherent Structure in a high-dimensional state space
Authors:
Miguel Beneitez,
Yohann Duguet,
Philipp Schlatter,
Dan S. Henningson
Abstract:
Dissipative dynamical systems characterised by two basins of attraction are found in many physical systems, notably in hydrodynamics where laminar and turbulent regimes can coexist. The state space of such systems is structured around a dividing manifold called the edge, which separates trajectories attracted by the laminar state from those reaching the turbulent state. We apply here concepts and…
▽ More
Dissipative dynamical systems characterised by two basins of attraction are found in many physical systems, notably in hydrodynamics where laminar and turbulent regimes can coexist. The state space of such systems is structured around a dividing manifold called the edge, which separates trajectories attracted by the laminar state from those reaching the turbulent state. We apply here concepts and tools from Lagrangian data analysis to investigate this edge manifold. This approach is carried out in the state space of automous arbitrarily high-dimensional dissipative systems, in which the edge manifold is re-interpreted as a Lagrangian Coherent Structure (LCS). Two different diagnostics, finite-time Lyapunov exponents and Lagrangian Descriptors, are used and compared with respect to their ability to identify the edge and to their scalability. Their properties are illustrated on several low-order models of subcritical transition of increasing dimension and complexity, as well on well-resolved simulations of the Navier-Stokes equations in the case of plane Couette flow. They allow for a mapping of the global structure of both the state space and the edge manifold based on quantitative information. Both diagnostics can also be used to generate efficient bisection algorithms to approach asymptotic edge states, which outperform classical edge tracking.
△ Less
Submitted 10 September, 2020; v1 submitted 2 April, 2020;
originally announced April 2020.
-
Forcing statistics in resolvent analysis: application in minimal turbulent Couette flow
Authors:
Petrônio A. S. Nogueira,
Pierluigi Morra,
Eduardo Martini,
André V. G. Cavalieri,
Dan S. Henningson
Abstract:
An analysis of the statistics of the non-linear terms in resolvent analysis is performed in this work for turbulent Couette flow at low Reynolds number. Data from a direct numerical simulation of a minimal flow unit, at Reynolds number 400, is post-processed using Fourier analysis in both time and space, leading to the covariance matrix of the velocity. From the same data, we computed the non-line…
▽ More
An analysis of the statistics of the non-linear terms in resolvent analysis is performed in this work for turbulent Couette flow at low Reynolds number. Data from a direct numerical simulation of a minimal flow unit, at Reynolds number 400, is post-processed using Fourier analysis in both time and space, leading to the covariance matrix of the velocity. From the same data, we computed the non-linear terms of the Navier-Stokes equations (treated as forcing in the present formulation), which allowed us to compute the covariance matrix of the forcing for this case. The two covariances are related exactly by the resolvent operator; based on this, we explore the recovery of the velocity statistics from the statistics of the forcing as a function of the components of the forcing term. This is carried out for the dominant structures in this flow, which participate in the self-sustaining cycle of turbulence: (i) streamwise vortices and streaks, and (ii) spanwise coherent fluctuations of spanwise velocity. The present results show a dominance by four of the non-linear terms for the prediction of the full statistics of streamwise vortices and streaks; a single term is seen to be dominant for spanwise motions. A relevant feature observed in these cases is that forcing terms have significant coherence in space; moreover, different forcing components are also coherent between them. This leads to constructive and destructive interferences that greatly modify the flow response, and should thus be accounted for in modelling work.
△ Less
Submitted 8 January, 2020;
originally announced January 2020.
-
Optimal perturbations and transition energy thresholds in boundary layer shear flows
Authors:
Chris Vavaliaris,
Miguel Beneitez,
Dan S. Henningson
Abstract:
Subcritical transition to turbulence in spatially developing boundary layer flows can be triggered efficiently by finite amplitude perturbations. In this work, we employ adjoint-based optimization to identify optimal initial perturbations in the Blasius boundary layer, culminating in the computation of the subcritical transition critical energy threshold and the associated fully localized critical…
▽ More
Subcritical transition to turbulence in spatially developing boundary layer flows can be triggered efficiently by finite amplitude perturbations. In this work, we employ adjoint-based optimization to identify optimal initial perturbations in the Blasius boundary layer, culminating in the computation of the subcritical transition critical energy threshold and the associated fully localized critical optimum in a spatially extended configuration, the so called minimal seed. By dynamically rescaling the variables with the local boundary layer thickness, we show that the identified edge trajectory approaches the same attracting phase space region as previously reported edge trajectories, and reaches the region more efficiently.
△ Less
Submitted 15 December, 2020; v1 submitted 16 November, 2019;
originally announced November 2019.
-
Global stability of rigid-body-motion fluid-structure-interaction problems
Authors:
Prabal S. Negi,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
A rigorous derivation and validation for linear fluid-structure-interaction (FSI) equations for a rigid-body-motion problem is performed in an Eulerian framework. We show that the added-stiffness terms arising in the formulation of Fanion et al. (2000) vanish at the FSI interface in a first-order approximation. Several numerical tests with rigid-body motion are performed to show the validity of th…
▽ More
A rigorous derivation and validation for linear fluid-structure-interaction (FSI) equations for a rigid-body-motion problem is performed in an Eulerian framework. We show that the added-stiffness terms arising in the formulation of Fanion et al. (2000) vanish at the FSI interface in a first-order approximation. Several numerical tests with rigid-body motion are performed to show the validity of the derived formulation by comparing the time evolution between the linear and non-linear equations when the base flow is perturbed by identical small-amplitude perturbations. In all cases both the growth rate and angular frequency of the instability matches within $0.1\%$ accuracy. The derived formulation is used to investigate the phenomenon of symmetry breaking for a rotating cylinder with an attached splitter-plate. The results show that the onset of symmetry breaking can be explained by the existence of a zero-frequency linearly unstable mode of the coupled fluid-structure-interaction system. Finally, the structural sensitivity of the least stable eigenvalue is studied for an oscillating cylinder, which is found to change significantly when the fluid and structural frequencies are close to resonance.
△ Less
Submitted 21 October, 2019;
originally announced October 2019.
-
Edge tracking in spatially developing boundary layer flows
Authors:
Miguel Beneitez,
Yohann Duguet,
Philipp Schlatter,
Dan S. Henningson
Abstract:
Recent progress in understanding subcritical transition to turbulence is based on the concept of the edge, the manifold separating the basins of attraction of the laminar and the turbulent state. Originally developed in numerical studies of parallel shear flows with a linearly stable base flow, this concept is adapted here to the case of a spatially developing Blasius boundary layer. Longer time h…
▽ More
Recent progress in understanding subcritical transition to turbulence is based on the concept of the edge, the manifold separating the basins of attraction of the laminar and the turbulent state. Originally developed in numerical studies of parallel shear flows with a linearly stable base flow, this concept is adapted here to the case of a spatially developing Blasius boundary layer. Longer time horizons fundamentally change the nature of the problem due to the loss of stability of the base flow due to Tollmien--Schlichting (TS) waves. We demonstrate, using a moving box technique, that efficient long-time tracking of edge trajectories is possible for the parameter range relevant to bypass transition, even if the asymptotic state itself remains out of reach. The flow along the edge trajectory features streak switching observed for the first time in the Blasius boundary layer. At long enough times, TS waves co-exist with the coherent structure characteristic of edge trajectories. In this situation we suggest a reinterpretation of the edge as a manifold dividing the state space between the two main types of boundary layer transition, i.e. bypass transition and classical transition.
△ Less
Submitted 30 August, 2019;
originally announced August 2019.
-
Unsteady aerodynamic effects in small-amplitude pitch oscillations of an airfoil
Authors:
Prabal S. Negi,
Ricardo Vinuesa,
Ardeshir Hanifi,
Philipp Schlatter,
Dan S. Henningson
Abstract:
High-fidelity wall-resolved large-eddy simulations (LES) are utilized to investigate the flow-physics of small-amplitude pitch oscillations of an airfoil at Re = 100,000. The investigation of the unsteady phenomenon is done in the context of natural laminar flow airfoils, which can display sensitive dependence of the aerodynamic forces on the angle of attack in certain "off-design" conditions. The…
▽ More
High-fidelity wall-resolved large-eddy simulations (LES) are utilized to investigate the flow-physics of small-amplitude pitch oscillations of an airfoil at Re = 100,000. The investigation of the unsteady phenomenon is done in the context of natural laminar flow airfoils, which can display sensitive dependence of the aerodynamic forces on the angle of attack in certain "off-design" conditions. The dynamic range of the pitch oscillations is chosen to be in this sensitive region. Large variations of the transition point on the suction-side of the airfoil are observed throughout the pitch cycle resulting in a dynamically rich flow response. Changes in the stability characteristics of a leading-edge laminar separation bubble has a dominating influence on the boundary layer dynamics and causes an abrupt change in the transition location over the airfoil. The LES procedure is based on a relaxation-term which models the dissipation of the smallest unresolved scales. The validation of the procedure is provided for channel flows and for a stationary wing at Re = 400,000.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
Turbulent boundary layers around wing sections up to Rec = 1,000,000
Authors:
R. Vinuesa,
P. S. Negi,
M. Atzori,
A. Hanifi,
D. S. Henningson,
P. Schlatter
Abstract:
Reynolds-number effects in the adverse-pressure-gradient (APG) turbulent boundary layer (TBL) developing on the suction side of a NACA4412 wing section are assessed in the present work. To this end, we analyze four cases at Reynolds numbers based on freestream velocity and chord length ranging from Rec = 100, 000 to 1,000,000, all of them with 5 degree angle of attack. The results of four well-res…
▽ More
Reynolds-number effects in the adverse-pressure-gradient (APG) turbulent boundary layer (TBL) developing on the suction side of a NACA4412 wing section are assessed in the present work. To this end, we analyze four cases at Reynolds numbers based on freestream velocity and chord length ranging from Rec = 100, 000 to 1,000,000, all of them with 5 degree angle of attack. The results of four well-resolved large-eddy simulations (LESs) are used to characterize the effect of Reynolds number on APG TBLs subjected to approximately the same pressure-gradient distribution (defined by the Clauser pressure-gradient parameter beta). Comparisons of the wing profiles with zero-pressure-gradient (ZPG) data at matched friction Reynolds numbers reveal that, for approximately the same beta distribution, the lower-Reynolds-number boundary layers are more sensitive to pressure-gradient effects. This is reflected in the values of the inner-scaled edge velocity Ue+ , the shape factor H, the components of the Reynolds-stress tensor in the outer region and the outer-region production of turbulent kinetic energy. This conclusion is supported by the larger wall-normal velocities and outer-scaled fluctuations observed in the lower-Rec cases.Thus, our results suggest that two complementing mechanisms contribute to the development of the outer region in TBLs and the formation of large-scale energetic structures: one mechanism associated with the increase in Reynolds number, and another one connected to the APG. Future extensions of the present work will be aimed at studying the differences in the outer-region energizing mechanisms due to APGs and increasing Reynolds number.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
A realizable data-driven approach to delay bypass transition with control theory
Authors:
Pierluigi Morra,
Kenzo Sasaki,
Ardeshir Hanifi,
André V. G. Cavalieri,
Dan S. Henningson
Abstract:
The current work presents a realizable method to control streaky disturbances in boundary layer flows and delay transition to turbulence via active flow control. Numerical simulations of the nonlinear transitional regime in a Blasius boundary layer are performed where streaks are excited in the boundary layer via a high level of free-stream turbulence (FST). The occurring disturbances are measured…
▽ More
The current work presents a realizable method to control streaky disturbances in boundary layer flows and delay transition to turbulence via active flow control. Numerical simulations of the nonlinear transitional regime in a Blasius boundary layer are performed where streaks are excited in the boundary layer via a high level of free-stream turbulence (FST). The occurring disturbances are measured via localized wall sensors and damped via near-wall actuators resembling plasma actuators. The time-varying amplitude of the signal of each actuator is computed by processing signals from the sensors. This processing is the result of two control laws: the Linear Quadratic Gaussian regulator (LQG) and the Inverse Feed-Forward Control technique (IFFC). The use of the first, LQG, requires a state-space representation of the system dynamics, so the flow is described via an operator that captures only the most relevant information of the dynamics and results in a reduced order model (ROM). The ROM is computed via the eigensystem realization algorithm, based on the impulse responses of the real system. Collecting such impulse responses may be unfeasible when considering FST because of the high dimensionality of the input forcing needed for a precise description of such a phenomenon. Here, a new method to identify the relevant system dynamics and generate the needed impulse responses is proposed, in a data-driven approach that would be realizable in experiments. Finally, the effectiveness of the technique in delaying bypass transition is shown. The work (i) presents a systematic way to deal with high dimensional disturbances to build ROMs for a control technique, and (ii) shows that even when considering constraints such as the type and size of actuators and sensors, it is possible to achieve at least as large delay of bypass transition as that obtained in more idealized cases found in literature.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
On the role of actuation for the control of streaky structures in boundary layers
Authors:
Kenzo Sasaki,
Pierluigi Morra,
André V G. Cavalieri,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
This work deals with the closed-loop control of streaky structures induced by free-stream turbulence in a zero-pressure gradient, transitional boundary layer, by means of localized sensors and actuators. A linear quadratic gaussian regulator is considered along with a system identification technique to build reduced-order models for control. Three actuators are developed with different spatial sup…
▽ More
This work deals with the closed-loop control of streaky structures induced by free-stream turbulence in a zero-pressure gradient, transitional boundary layer, by means of localized sensors and actuators. A linear quadratic gaussian regulator is considered along with a system identification technique to build reduced-order models for control. Three actuators are developed with different spatial supports, corresponding to a baseline shape with only vertical forcing, and to two other shapes obtained by different optimization procedures. A computationally efficient method is derived to obtain an actuator which aims to induce the exact structures which are inside the boundary layer, given in terms of their first spectral proper orthogonal decomposition mode, and an actuator that maximizes the energy of induced downstream structures. Two free-stream turbulence levels were evaluated, corresponding to 3.0% and 3.5%, and closed-loop control is applied in large-eddy simulations of transitional boundary layers. All three actuators lead to significant delays in the transition to turbulence and were shown to be robust to mild variations in the free-stream turbulence levels. Differences are understood in terms of the SPOD of actuation and FST-induced fields along with the causality of the control scheme. The actuator optimized to generate the leading downstream SPOD mode, representing the streaks in the open-loop flow, leads to the highest transition delay, which can be understood due to its capability of closely cancelling structures in the boundary layer. However, it is shown that even with the actuator located downstream of the input measurement it may become impossible to cancel incoming disturbances in a causal way, depending on the wall-normal position of the output and on the actuator considered, which limits sensor and actuator placement capable of good closed-loop performance.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
On the relevance of Reynolds stresses in resolvent analyses of turbulent wall-bounded flows
Authors:
Pierluigi Morra,
Onofrio Semeraro,
Dan S. Henningson,
Carlo Cossu
Abstract:
The ability of linear stochastic response analysis to estimate coherent motions is investigated in turbulent channel flow at friction Reynolds number Re$_τ$ = 1007. The analysis is performed for spatial scales characteristic of buffer-layer and large-scale motions by separating the contributions of different temporal frequencies. Good agreement between the measured spatio-temporal power spectral d…
▽ More
The ability of linear stochastic response analysis to estimate coherent motions is investigated in turbulent channel flow at friction Reynolds number Re$_τ$ = 1007. The analysis is performed for spatial scales characteristic of buffer-layer and large-scale motions by separating the contributions of different temporal frequencies. Good agreement between the measured spatio-temporal power spectral densities and those estimated by means of the resolvent is found when the effect of turbulent Reynolds stresses, modelled with an eddy-viscosity associated to the turbulent mean flow, is included in the resolvent operator. The agreement is further improved when the flat forcing power spectrum (white noise) is replaced with a power spectrum matching the measures. Such a good agreement is not observed when the eddy-viscosity terms are not included in the resolvent operator. In this case, the estimation based on the resolvent is unable to select the right peak frequency and wall-normal location of buffer-layer motions. Similar results are found when comparing truncated expansions of measured streamwise velocity power spectral densities based on a spectral proper orthogonal decomposition to those obtained with optimal resolvent modes.
△ Less
Submitted 14 January, 2019;
originally announced January 2019.
-
Assessment of turbulent boundary layers on a NACA4412 wing section at moderate Re
Authors:
R. Vinuesa,
S. M. Hosseini,
A. Hanifi,
D. S. Henningson,
P. Schlatter
Abstract:
The results of a DNS of the flow around a wing section represented by a NACA4412 profile, with Rec = 400, 000 and 5 degree angle of attack, are presented in this study. The high-order spectral element code Nek5000 was used for the computations. The Clauser pressure-gradient parameter ? ranges from 0 and 85 on the suction side, and the maximum Re_theta and Re_tau values are around 2,800 and 373, re…
▽ More
The results of a DNS of the flow around a wing section represented by a NACA4412 profile, with Rec = 400, 000 and 5 degree angle of attack, are presented in this study. The high-order spectral element code Nek5000 was used for the computations. The Clauser pressure-gradient parameter ? ranges from 0 and 85 on the suction side, and the maximum Re_theta and Re_tau values are around 2,800 and 373, respectively. Comparisons between the suction side with ZPG TBL data show a more prominent wake, a steeper logarithmic region and lower velocities in the buffer region. The APG also leads to a progressively increasing value of the inner peak in the tangential velocity fluctuations, as well as the development of an outer peak, which is also observed in the other components of the Reynolds stress tensor. Other effects of strong APGs are increased production and dissipation profiles across the boundary layer, together with enhanced viscous diffusion and velocity-pressure-gradient correlation values near the wall. All these effects are connected to the fact that the large-scale motions of the flow become energized due to the APG, as apparent from spanwise premultiplied power spectral density plots.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Reynolds-number effects in turbulent boundary layers around wing sections
Authors:
Ricardo Vinuesa,
Prabal Negi,
Marco Atzori,
Ardeshir Hanifi,
Dan S. Henningson,
Philipp Schlatter
Abstract:
Four well-resolved LESs of the turbulent boundary layers around a NACA4412 wing section, with Rec ranging from 100,000 to 1,000,000, were performed at 5 degree angle of attack. By comparing the turbulence statistics with those in ZPG TBLs at approximately matching Re_tau, we find that the effect of the adverse pressure gradient (APG) is more intense at lower Reynolds numbers. This indicates that a…
▽ More
Four well-resolved LESs of the turbulent boundary layers around a NACA4412 wing section, with Rec ranging from 100,000 to 1,000,000, were performed at 5 degree angle of attack. By comparing the turbulence statistics with those in ZPG TBLs at approximately matching Re_tau, we find that the effect of the adverse pressure gradient (APG) is more intense at lower Reynolds numbers. This indicates that at low Re the outer region of the TBL becomes more energized through the wall-normal convection associated to the APG. This is also reflected in the fact that the inner-scaled wall-normal velocity is larger on the suction side at lower Reynolds numbers. In particular, the wing cases at Rec = 200,000 and 400,000 exhibit wall-normal velocities 40% and 20% larger, respectively, than the case with Rec = 1,000,000. Consequently, the outer-region energizing mechanism associated to the APG is complementary to that present in high-Re TBLs.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Edge states as mediators of bypass transition in boundary-layer flows
Authors:
Taras Khapko,
Tobias Kreilos,
Philipp Schlatter,
Yohann Duguet,
Bruno Eckhardt,
Dan S. Henningson
Abstract:
The concept of edge state is investigated in the asymptotic suction boundary layer in relation with the receptivity process to noisy perturbations and the nucleation of turbulent spots. Edge tracking is first performed numerically, without imposing any discrete symmetry, in a large computational domain allowing for full spatial localisation of the perturbation velocity. The edge state is a three-d…
▽ More
The concept of edge state is investigated in the asymptotic suction boundary layer in relation with the receptivity process to noisy perturbations and the nucleation of turbulent spots. Edge tracking is first performed numerically, without imposing any discrete symmetry, in a large computational domain allowing for full spatial localisation of the perturbation velocity. The edge state is a three-dimensional localised structure recurrently characterised by a single low-speed streak that experiences erratic bursts and planar shifts. This recurrent streaky structure is then compared with predecessors of individual spot nucleation events, triggered by non-localised initial noise. The present results suggest a nonlinear picture, rooted in dynamical systems theory, of the nucleation process of turbulent spots in boundary-layer flows, in which the localised edge state play the role of state-space mediator.
△ Less
Submitted 10 May, 2016;
originally announced May 2016.
-
Bypass transition and spot nucleation in boundary layers
Authors:
Tobias Kreilos,
Taras Khapko,
Philipp Schlatter,
Yohann Duguet,
Dan S. Henningson,
Bruno Eckhardt
Abstract:
The spatio-temporal aspects of the transition to turbulence are considered in the case of a boundary layer flow developing above a flat plate exposed to free-stream turbulence. Combining results on the receptivity to free-stream turbulence with the nonlinear concept of a transition threshold, a physically motivated model suggests a spatial distribution of spot nucleation events. To describe the ev…
▽ More
The spatio-temporal aspects of the transition to turbulence are considered in the case of a boundary layer flow developing above a flat plate exposed to free-stream turbulence. Combining results on the receptivity to free-stream turbulence with the nonlinear concept of a transition threshold, a physically motivated model suggests a spatial distribution of spot nucleation events. To describe the evolution of turbulent spots a probabilistic cellular automaton is introduced, with all parameters directly fitted from numerical simulations of the boundary layer. The nucleation rates are then combined with the cellular automaton model, yielding excellent quantitative agreement with the statistical characteristics for different free-stream turbulence levels. We thus show how the recent theoretical progress on transitional wall-bounded flows can be extended to the much wider class of spatially developing boundary-layer flows.
△ Less
Submitted 25 April, 2016;
originally announced April 2016.
-
Turbulence transition in the asymptotic suction boundary layer
Authors:
Tobias Kreilos,
Taras Khapko,
Tobias M Schneider,
Gregor Veble,
Yohann Duguet,
Philipp Schlatter,
Dan S Henningson,
Bruno Eckhardt
Abstract:
We study the transition to turbulence in the asymptotic suction boundary layer (ASBL) by direct numerical simulation. Tracking the motion of trajectories intermediate between laminar and turbulent states we can identify the invariant object inside the laminar-turbulent boundary, the edge state. In small domains, the flow behaves like a travelling wave over short time intervals. On longer times one…
▽ More
We study the transition to turbulence in the asymptotic suction boundary layer (ASBL) by direct numerical simulation. Tracking the motion of trajectories intermediate between laminar and turbulent states we can identify the invariant object inside the laminar-turbulent boundary, the edge state. In small domains, the flow behaves like a travelling wave over short time intervals. On longer times one notes that the energy shows strong bursts at regular time intervals. During the bursts the streak structure is lost, but it reforms, translated in the spanwise direction by half the domain size. Varying the suction velocity allows to embed the flow into a family of flows that interpolate between plane Couette flow and the ASBL. Near the plane Couette limit, the edge state is a travelling wave. Increasing the suction, the travelling wave and a symmetry-related copy of it undergo a saddle-node infinite-period (SNIPER) bifurcation that leads to bursting and discrete-symmetry shifts. In wider domains, the structures localize in the spanwise direction, and the flow in the active region is similar to the one in small domains. There are still periodic bursts at which the flow structures are shifted, but the shift-distance is no longer connected to a discrete symmetry of the flow geometry. Two different states are found by edge tracking techniques, one where structures are shifted to the same side at every burst and one where they are alternatingly shifted to the left and to the right.
△ Less
Submitted 31 August, 2015;
originally announced August 2015.
-
Recurrent bursts via linear processes in turbulent environments
Authors:
Geert Brethouwer,
Philipp Schlatter,
Yohann Duguet,
Dan S. Henningson,
Arne V. Johansson
Abstract:
Large-scale instabilities occurring in the presence of small-scale turbulent fluctuations are frequently observed in geophysical or astrophysical contexts but are difficult to reproduce in the laboratory. Using extensive numerical simulations, we report here on intense recurrent bursts of turbulence in plane Poiseuille flow rotating about a spanwise axis. A simple model based on the linear instabi…
▽ More
Large-scale instabilities occurring in the presence of small-scale turbulent fluctuations are frequently observed in geophysical or astrophysical contexts but are difficult to reproduce in the laboratory. Using extensive numerical simulations, we report here on intense recurrent bursts of turbulence in plane Poiseuille flow rotating about a spanwise axis. A simple model based on the linear instability of the mean flow can predict the structure and time scale of the nearly-periodic and self-sustained burst cycles. Rotating Poiseuille flow is suggested as a prototype for future studies of low-dimensional dynamics embedded in strongly turbulent environments.
△ Less
Submitted 4 May, 2014;
originally announced May 2014.
-
Adaptive and model-based control theory applied to convectively unstable flows
Authors:
N. Fabbiane,
O. Semeraro,
S. Bagheri,
D. S. Henningson
Abstract:
Research on active control for the delay of laminar-turbulent transition in boundary layers has made a significant progress in the last two decades, but the employed strategies have been many and dispersed. Using one framework, we review model-based techniques, such as linear-quadratic regulators, and model-free adaptive methods, such as least-mean square filters. The former are supported by a ele…
▽ More
Research on active control for the delay of laminar-turbulent transition in boundary layers has made a significant progress in the last two decades, but the employed strategies have been many and dispersed. Using one framework, we review model-based techniques, such as linear-quadratic regulators, and model-free adaptive methods, such as least-mean square filters. The former are supported by a elegant and powerful theoretical basis, whereas the latter may provide a more practical approach in the presence of complex disturbance environments, that are difficult to model. We compare the methods with a particular focus on efficiency, practicability and robustness to uncertainties. Each step is exemplified on the one-dimensional linearized Kuramoto-Sivashinsky equation, that shows many similarities with the initial linear stages of the transition process of the flow over a flat plate. Also, the source code for the examples are provided.
△ Less
Submitted 14 March, 2014; v1 submitted 6 February, 2014;
originally announced February 2014.
-
Centralised versus Decentralised Active Control of Boundary Layer Instabilities
Authors:
R. Dadfar,
N. Fabbiane,
S. Bagheri,
D. S. Henningson
Abstract:
We use linear control theory to construct an output feedback controller for the attenuation of small-amplitude Tollmien-Schlichting (TS) wavepackets in a flat-plate boundary layer.We distribute evenly in the spanwise direction up to 72 localized objects near the wall (18 disturbances sources, 18 actuators, 18 estimation sensors and 18 objective sensors). In a fully three-dimensional configuration,…
▽ More
We use linear control theory to construct an output feedback controller for the attenuation of small-amplitude Tollmien-Schlichting (TS) wavepackets in a flat-plate boundary layer.We distribute evenly in the spanwise direction up to 72 localized objects near the wall (18 disturbances sources, 18 actuators, 18 estimation sensors and 18 objective sensors). In a fully three-dimensional configuration,the interconnection between inputs and outputs becomes quickly unfeasible when the number of actuators and sensors increases in the spanswise direction. The objective of this work is to understand how an efficient controller may be designed by connecting only a subset of the actuators to sensors, thereby reducing the complexity of the controller, without comprising the efficiency. We find that using a semi-decentralized approach - where small control units consisting of 3 estimation sensors connected to 3 actuators are replicated 6 times along the spanwise direction - results only in a 11% reduction of control performance. Our results reveal that the best performance is obtained for a control unit which (i) is sufficiently wide to account for the full spanwise scale of the wavepacket when it reaches the actuators and (ii) is designed to account for the perturbations which are coming from the lateral sides (crosstalk) of the estimation sensors. We have also found that the influence of crosstalk is not as essential as the spreading effect.
△ Less
Submitted 4 February, 2014;
originally announced February 2014.
-
Complexity of localised coherent structures in a boundary-layer flow
Authors:
Taras Khapko,
Yohann Duguet,
Tobias Kreilos,
Philipp Schlatter,
Bruno Eckhardt,
Dan S. Henningson
Abstract:
We study numerically transitional coherent structures in a boundary-layer flow with homogeneous suction at the wall (the so-called asymptotic suction boundary layer ASBL). The dynamics restricted to the laminar-turbulent separatrix is investigated in a spanwise-extended domain that allows for robust localisation of all edge states. We work at fixed Reynolds number and study the edge states as a fu…
▽ More
We study numerically transitional coherent structures in a boundary-layer flow with homogeneous suction at the wall (the so-called asymptotic suction boundary layer ASBL). The dynamics restricted to the laminar-turbulent separatrix is investigated in a spanwise-extended domain that allows for robust localisation of all edge states. We work at fixed Reynolds number and study the edge states as a function of the streamwise period. We demonstrate the complex spatio-temporal dynamics of these localised states, which exhibits multistability and undergoes complex bifurcations leading from periodic to chaotic regimes. It is argued that in all regimes the dynamics restricted to the edge is essentially low-dimensional and non-extensive.
△ Less
Submitted 3 October, 2013; v1 submitted 26 August, 2013;
originally announced August 2013.
-
Hairpins et al. in Turbulent Boundary Layers
Authors:
Philipp Schlatter,
Milos Ilak,
Mattias Chevalier,
Geert Brethouwer,
Arne V. Johansson,
Dan S. Henningson
Abstract:
A new set of three-dimensional visualisations of a large-scale direct numerical simulations (DNS) of a turbulent boundary layer is presented. The Reynolds number ranges from $Re_θ=180$ to 4300, based on the momentum-loss thickness $θ$ and the free-stream velocity $U_\infty$. The focus of the present fluid dynamics video is on analysing the coherent vortical structures in the boundary layer: It is…
▽ More
A new set of three-dimensional visualisations of a large-scale direct numerical simulations (DNS) of a turbulent boundary layer is presented. The Reynolds number ranges from $Re_θ=180$ to 4300, based on the momentum-loss thickness $θ$ and the free-stream velocity $U_\infty$. The focus of the present fluid dynamics video is on analysing the coherent vortical structures in the boundary layer: It is clearly shown that the initial phases are dominated by coherent so-called hairpin vortices which are characteristic remainders of the laminar-turbulent transition at lower Reynolds numbers. At higher $Re$ (say $Re_θ>2000$), these structures are no longer seen as being dominant; the coherence is clearly lost, both in the near-wall region as well as in the outer layer of the boundary layer. Note, however, that large-scale streaks in the streamwise velocity, which have their peak energy at about half the boundary-layer thickness, are unambiguously observed.
In addition to visualisation with classical three-dimensional isosurfaces, the video is also rendered using stereoscopic views using red-cyan anaglyphs.
△ Less
Submitted 18 October, 2011;
originally announced October 2011.
-
The structure of a turbulent boundary layer studied by numerical simulation
Authors:
Philipp Schlatter,
Mattias Chevalier,
Miloš Ilak,
Dan S. Henningson
Abstract:
Time-dependent visualisations of large-scale direct and large-eddy simulations (DNS and LES) of a turbulent boundary layer reaching up to $Re_θ=4300$ are presented. The focus of the present fluid dynamics video is on analysing the coherent vortical structures in the boundary layer: It is clearly shown that hairpin vortices are indeed present in the simulation data, however they are characteristic…
▽ More
Time-dependent visualisations of large-scale direct and large-eddy simulations (DNS and LES) of a turbulent boundary layer reaching up to $Re_θ=4300$ are presented. The focus of the present fluid dynamics video is on analysing the coherent vortical structures in the boundary layer: It is clearly shown that hairpin vortices are indeed present in the simulation data, however they are characteristic remainders of the laminar-turbulent transition at lower Reynolds numbers. At higher $Re$ (say $Re_θ>2000$), these structures are no longer seen as being dominant; the coherence is clearly lost, both in the near-wall region as well as in the outer layer of the boundary layer. Note, however, that large-scale streaks in the streamwise velocity, which have their peak energy at about half the boundary-layer thickness, are unambiguously observed.
△ Less
Submitted 19 October, 2010;
originally announced October 2010.
-
Stability of a jet in crossflow
Authors:
Miloš Ilak,
Philipp Schlatter,
Shervin Bagheri,
Mattias Chevalier,
Dan S. Henningson
Abstract:
We have produced a fluid dynamics video with data from Direct Numerical Simulation (DNS) of a jet in crossflow at several low values of the velocity inflow ratio R. We show that, as the velocity ratio R increases, the flow evolves from simple periodic vortex shedding (a limit cycle) to more complicated quasi-periodic behavior, before finally exhibiting asymmetric chaotic motion. We also perform a…
▽ More
We have produced a fluid dynamics video with data from Direct Numerical Simulation (DNS) of a jet in crossflow at several low values of the velocity inflow ratio R. We show that, as the velocity ratio R increases, the flow evolves from simple periodic vortex shedding (a limit cycle) to more complicated quasi-periodic behavior, before finally exhibiting asymmetric chaotic motion. We also perform a stability analysis just above the first bifurcation, where R is the bifurcation parameter. Using the overlap of the direct and the adjoint eigenmodes, we confirm that the first instability arises in the shear layer downstream of the jet orifice on the boundary of the backflow region just behind the jet.
△ Less
Submitted 18 October, 2010;
originally announced October 2010.
-
Threshold amplitudes for transition to turbulence in a pipe
Authors:
Lloyd N. Trefethen,
S. J. Chapman,
Dan S. Henningson,
Alvaro Meseguer,
Tom Mullin,
F. T. M Nieuwstadt
Abstract:
Although flow in a circular pipe is stable to infinitesimal perturbations, it can be excited to turbulence by finite perturbations whose minimal amplitude shrinks as R goes to infinity (R = Reynolds number). Laboratory experiments have appeared to disagree with one another and with theoretical predictions about the dependence of this minimal amplitude on $R$, with published results ranging appro…
▽ More
Although flow in a circular pipe is stable to infinitesimal perturbations, it can be excited to turbulence by finite perturbations whose minimal amplitude shrinks as R goes to infinity (R = Reynolds number). Laboratory experiments have appeared to disagree with one another and with theoretical predictions about the dependence of this minimal amplitude on $R$, with published results ranging approximately from $R^{-1/4}$ to $R^{-3/2}$. Here it is shown that these discrepancies can be explained by the use of different definitions of amplitude by different authors. An attempt is made to convert the existing results to a uniform definition of amplitude, the nondimensionalized $L^2$ definition common in the theoretical literature. Although subtleties in the physics raise some questions, agreement appears to be reached on a minimal amplitude that scales as $R^{-3/2 \pm 0.3}$.
△ Less
Submitted 28 July, 2000;
originally announced July 2000.
