Showing 1–37 of 37 results for author: Hasegawa, K

Evaporation-induced freezing dynamics of droplets levitated in acoustic field

Authors: Misaki Mitsuno, Xiao Ma, Koji Hasegawa

Abstract: This paper presents the evaporation-induced freezing dynamics of pure cyclohexane droplets levitated via acoustic levitation. Acoustic levitation has attracted considerable attention across various fields owing to its potential to create lab-in-a-drop systems. While droplet evaporation is a fundamental physicochemical process in such a platform, the freezing of droplets induced by evaporation has… ▽ More This paper presents the evaporation-induced freezing dynamics of pure cyclohexane droplets levitated via acoustic levitation. Acoustic levitation has attracted considerable attention across various fields owing to its potential to create lab-in-a-drop systems. While droplet evaporation is a fundamental physicochemical process in such a platform, the freezing of droplets induced by evaporation has been sparsely explored experimentally. For pure cyclohexane, the rapid evaporation of levitated droplets initiated freezing at the droplet surface. To better understand this evaporation-induced freezing process, the evaporation behavior of the levitated cyclohexane droplets was visualized and quantified using a high-speed camera and an infrared camera. According to the obtained experimental data, the evaporative heat transfer characteristics of the droplets were identified with theoretical models. Using the derived heat transfer coefficient, a mathematical prediction method for the onset of freezing was proposed and validated with the experimental data. These experimental findings offer valuable insights into the phase transition process and its potential physicochemical applications in a containerless environment. △ Less

Submitted 28 June, 2025; v1 submitted 28 May, 2025; originally announced May 2025.

Multiple Ultrasound Image Generation based on Tuned Alignment of Amplitude Hologram over Spatially non-Uniform Ultrasound Source

Authors: Keisuke Hasegawa

Abstract: In this study, a method for readily and inexpensively generating real-time reconfigurable intense midair ultrasound field is proposed. Recent investigations and applications of midair convergent high-power ultrasound have been increasingly growing. For generating such ultrasound fields, specifically designed ultrasound sources or phased arrays of ultrasound transducers are conventionally used. The… ▽ More In this study, a method for readily and inexpensively generating real-time reconfigurable intense midair ultrasound field is proposed. Recent investigations and applications of midair convergent high-power ultrasound have been increasingly growing. For generating such ultrasound fields, specifically designed ultrasound sources or phased arrays of ultrasound transducers are conventionally used. The former can be more readily fabricated but cannot drastically reconfigure the generated ultrasound field, and the latter can create electronically controllable ultrasound fields but is much more difficult to implement and expensive. The proposed method utilizes a planar ultrasound source with a fixed surface vibration pattern and a newly designed amplitude mask inspired by the Fresnel-zone-plate (FZP). The mask is designed so that when it is placed on a specific position on the source, the partially covered source emission results in forming pre-determined ultrasound fields with corresponding specific spatial pattern. With these new masks, the generated fields can be switched among several presets by changing the mask position on the source. The proposed technique only requires slight mechanical translation of the mask over the source to instantaneously reconfigure the resulting midair ultrasound field. The proposed method enables one to create a reconfigurable ultrasound field with a large source aperture in a practically feasible setup, which will potentially broaden the workspace of current midair-ultrasound applications to the whole-room scale. △ Less

Submitted 21 March, 2025; originally announced March 2025.

Focusing Airborne Ultrasound with Partially Occluded Emission from Rectangular Plate with Flexural Vibration Mode

Authors: Keisuke Hasegawa, Masaya Fujimori, Masaya Takasaki

Abstract: We propose a focusing method of intense midair ultrasound out of ultrasonic emission from a single flexurally vibrating square plate partially covered with a purposely designed amplitude mask. Many applications relying on nonlinear acoustic effects, such as radiation force employed in acoustic levitation, have been devised. For those applications, focused intense airborne ultrasound is conventiona… ▽ More We propose a focusing method of intense midair ultrasound out of ultrasonic emission from a single flexurally vibrating square plate partially covered with a purposely designed amplitude mask. Many applications relying on nonlinear acoustic effects, such as radiation force employed in acoustic levitation, have been devised. For those applications, focused intense airborne ultrasound is conventionally formed using phased arrays of transducers or sound sources with specific fabricated shapes. However, the former strategies are considerably costly, and the latter may require minute three-dimensional fabrication processes, which both hinder their utility, especially for the construction of a large ultrasound emitting aperture. Our method offers a possible solution for this, where the amplitude masks are designed in a fashion similar to the Freznel-zone-plate designing, but according to the positions of nodes and antinodes of the vibrating plate that are measured beforehand. We experimentally demonstrate the successful formation of midair ultrasound focus at a desired position. Our method only requires a monolithic plate, a driving transducer under the plate, and an amplitude mask fabricated out of laser machining processes of an acrylic plate. Magnification of the spatial scale of ultrasound apertures based on our method is much more readily and affordably achieved than conventional methods, which will lead to new midair ultrasound applications with the whole room workspace. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Airborne Ouzo: Evaporation-induced emulsification and phase separation dynamics of ternary droplets in acoustic levitation

Authors: Misaki Mitsuno, Koji Hasegawa

Abstract: We experimentally investigated the evaporation dynamics of acoustically levitated Ouzo droplets (a mixture of ethanol, water, and anise oil). Acoustic levitation has gained significant attention in various fields due to its potential to create a lab-in-a-drop. Although evaporation is a key process in nature and industry, many studies have focused on single and binary components, and ternary drople… ▽ More We experimentally investigated the evaporation dynamics of acoustically levitated Ouzo droplets (a mixture of ethanol, water, and anise oil). Acoustic levitation has gained significant attention in various fields due to its potential to create a lab-in-a-drop. Although evaporation is a key process in nature and industry, many studies have focused on single and binary components, and ternary droplets in acoustic levitation have rarely been experimentally investigated. In this study, the evaporation-induced spontaneous emulsification (the Ouzo effect) and phase separation process at 40-90 vol% ethanol were visualized. We estimated the concentration change by evaporation of each component in the levitated ternary droplets based on the evaporation model to identify the experimental results. Our experimental results revealed four distinct stages of evaporation in levitated Ouzo droplets: (1) preferential evaporation of the volatile component (ethanol), (2) spontaneous emulsification (myriad micro-oil droplets generation), (3) phase separation forming a core-shell droplet, and (4) water evaporation completion resulting in remaining an oil droplet. Finally, we analyzed the emulsification process by a spacetime diagram. These findings suggest that acoustic levitation is suitable for physicochemical manipulation in mid-air. △ Less

Submitted 20 December, 2023; originally announced December 2023.

Comparing flow-based and anatomy-based features in the data-driven study of nasal pathologies

Authors: Andrea Schillaci, Kazuto Hasegawa, Carlotta Pipolo, Giacomo Boracchi, Maurizio Quadrio

Abstract: In several problems involving fluid flows, Computational Fluid Dynamics (CFD) provides detailed quantitative information, and often allows the designer to successfully optimize the system, by minimizing a cost function. Sometimes, however, one cannot improve the system with CFD alone, because a suitable cost function is not readily available: one notable example is diagnosis in medicine. The field… ▽ More In several problems involving fluid flows, Computational Fluid Dynamics (CFD) provides detailed quantitative information, and often allows the designer to successfully optimize the system, by minimizing a cost function. Sometimes, however, one cannot improve the system with CFD alone, because a suitable cost function is not readily available: one notable example is diagnosis in medicine. The field of interest considered here is rhinology: a correct air flow is key for the functioning of the human nose, yet the notion of a functionally normal nose is not available, and a cost function cannot be written. An alternative and attractive pathway to diagnosis and surgery planning is offered by data-driven methods. In this work, we consider the machine-learning study of nasal pathologies caused by anatomic malformations, with the aim of understanding whether fluid dynamic features, available after a CFD analysis, are more effective than purely geometric features in the training of a neural network for regression. Our experiments are carried out on an extremely simplified anatomic model and a correspondingly simple CFD approach; nevertheless, they demonstrate that flow-based features perform better than geometry-based ones, and allow the training of a neural network with fewer inputs, a crucial advantage in fields like medicine. △ Less

Submitted 18 December, 2023; originally announced December 2023.

Comments: Submitted to Flow

Optimal design for wavelength conversion with a configuration of walk-off compensation in free space in the nanosecond pulsed regime

Authors: Chiaki Ohae, Kenji Hasegawa, Masato Nagano, Soma Tahara, Masayuki Katsuragawa

Abstract: On the basis of standard wavelength conversion by the use of angular phase matching of nonlinear optical crystals arranged in free space, applicable to a wide range of wavelengths and laser intensities, we both numerically and experimentally present an optimal design for achieving near-full energy conversion while maintaining good single-mode properties of fundamental laser radiation in the nanose… ▽ More On the basis of standard wavelength conversion by the use of angular phase matching of nonlinear optical crystals arranged in free space, applicable to a wide range of wavelengths and laser intensities, we both numerically and experimentally present an optimal design for achieving near-full energy conversion while maintaining good single-mode properties of fundamental laser radiation in the nanosecond regime. △ Less

Submitted 30 September, 2023; originally announced October 2023.

Comments: 9 pages, including 4 figures

Airborne Ultrasound Focusing Aperture with Binary Amplitude Mask Over Planar Ultrasound Emissions

Authors: Masatake Kitano, Keisuke Hasegawa

Abstract: Phased arrays of airborne ultrasound transducers are widely utilized as a key technology to achieve mid-air convergence of intense ultrasound, which is applied to a variety of systems, such as contactless tactile presentation, acoustic-levitation and its application, mid-air-flow acceleration, etc. However, it requires considerably precise phase control with temporally severe synchronization betwe… ▽ More Phased arrays of airborne ultrasound transducers are widely utilized as a key technology to achieve mid-air convergence of intense ultrasound, which is applied to a variety of systems, such as contactless tactile presentation, acoustic-levitation and its application, mid-air-flow acceleration, etc. However, it requires considerably precise phase control with temporally severe synchronization between elements, which leads to difficulty in scaling up the entire system beyond the tabletop size as most of the current application systems. Here, we propose a much simpler and easier scaling-up method of airborne ultrasound convergence, where a binary amplitude mask that serves as a Fresnel Zone Plate (FZP) is placed on the planar in-phase ultrasound sources. We experimentally demonstrate that the FZP-based ultrasound focusing achieved a spatial resolution that is comparable to conventional methods, based on the use of phase-controlled transducers. The ultrasound foci created using FZPs are sufficiently intense for most application scenarios that are currently in practical use. We also determine favorable side effects of our method suppressing grating lobes, which is inevitable with the conventional phase-controlling method. The FZPs and planar ultrasound sources are both readily implemented with inexpensive ingredients and components. The result of our study contributes to upsizing dimensions in which a mid-air convergent ultrasound field is successfully generated. Accordingly, unprecedented application scenarios that target the entire room as the workspace will be possible. △ Less

Submitted 21 March, 2023; v1 submitted 30 December, 2022; originally announced January 2023.

Comments: Revised Version

Input optics systems of the KAGRA detector during O3GK

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, Z. Cao, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, C-I. Chiang, H. Chu, Y-K. Chu, S. Eguchi , et al. (228 additional authors not shown)

Abstract: KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensit… ▽ More KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Update of beam coupling impedance evaluation by the stretched-wire method

Authors: T. Toyama, A. Kobayashi, T. Nakamura, M. Yoshii, C. Ohmori, K. Hasegawa, Y. Sugiyama, T. Shibata, K. Ishii, Y. Shobuda, F. Tamura, K. Hanamura, T. Kawachi

Abstract: In many cases beam coupling impedances or wake fields are calculated with computer simulator such as CST Studio Suite, GdfidL Electromagnetic Field Simulator and so on. But evaluation with the stretched-wire method is still very useful by its flexibility to the change of the device-under-test configuration, speed to get results and, more than anything, its accessibility on the real devices. One of… ▽ More In many cases beam coupling impedances or wake fields are calculated with computer simulator such as CST Studio Suite, GdfidL Electromagnetic Field Simulator and so on. But evaluation with the stretched-wire method is still very useful by its flexibility to the change of the device-under-test configuration, speed to get results and, more than anything, its accessibility on the real devices. One of the drawbacks in the practical procedure, difficulty of Thru-Reflect-Line calibration, is overcome using the calibration method recently introduced in high frequency vector network analyzers, "2-X THRU de-embedding". Here the procedure is explained in detail. The method has been successfully applied to RF cavity and FX kicker measurement in the J-PARC MR. △ Less

Submitted 22 August, 2022; v1 submitted 19 August, 2022; originally announced August 2022.

Comments: 4 pages, 11 figures, IPAC2022 (13th International Particle Accelerator Conference)

Model order reduction with neural networks: Application to laminar and turbulent flows

Authors: Kai Fukami, Kazuto Hasegawa, Taichi Nakamura, Masaki Morimoto, Koji Fukagata

Abstract: We investigate the capability of neural network-based model order reduction, i.e., autoencoder (AE), for fluid flows. As an example model, an AE which comprises of a convolutional neural network and multi-layer perceptrons is considered in this study. The AE model is assessed with four canonical fluid flows, namely: (1) two-dimensional cylinder wake, (2) its transient process, (3) NOAA sea surface… ▽ More We investigate the capability of neural network-based model order reduction, i.e., autoencoder (AE), for fluid flows. As an example model, an AE which comprises of a convolutional neural network and multi-layer perceptrons is considered in this study. The AE model is assessed with four canonical fluid flows, namely: (1) two-dimensional cylinder wake, (2) its transient process, (3) NOAA sea surface temperature, and (4) $y-z$ sectional field of turbulent channel flow, in terms of a number of latent modes, a choice of nonlinear activation functions, and a number of weights contained in the AE model. We find that the AE models are sensitive against the choice of the aforementioned parameters depending on the target flows. Finally, we foresee the extensional applications and perspectives of machine learning based order reduction for numerical and experimental studies in fluid dynamics community. △ Less

Submitted 7 September, 2021; v1 submitted 20 November, 2020; originally announced November 2020.

Journal ref: SN Comput. Sci. 2, 467 (2021)

Convolutional neural network and long short-term memory based reduced order surrogate for minimal turbulent channel flow

Authors: Taichi Nakamura, Kai Fukami, Kazuto Hasegawa, Yusuke Nabae, Koji Fukagata

Abstract: We investigate the applicability of machine learning based reduced order model (ML-ROM) to three-dimensional complex flows. As an example, we consider a turbulent channel flow at the friction Reynolds number of $Re_τ=110$ in a minimum domain which can maintain coherent structures of turbulence. Training data set are prepared by direct numerical simulation (DNS). The present ML-ROM is constructed b… ▽ More We investigate the applicability of machine learning based reduced order model (ML-ROM) to three-dimensional complex flows. As an example, we consider a turbulent channel flow at the friction Reynolds number of $Re_τ=110$ in a minimum domain which can maintain coherent structures of turbulence. Training data set are prepared by direct numerical simulation (DNS). The present ML-ROM is constructed by combining a three-dimensional convolutional neural network autoencoder (CNN-AE) and a long short-term memory (LSTM). The CNN-AE works to map high-dimensional flow fields into a low-dimensional latent space. The LSTM is then utilized to predict a temporal evolution of the latent vectors obtained by the CNN-AE. The combination of CNN-AE and LSTM can represent the spatio-temporal high-dimensional dynamics of flow fields by only integrating the temporal evolution of the low-dimensional latent dynamics. The turbulent flow fields reproduced by the present ML-ROM show statistical agreement with the reference DNS data in time-ensemble sense, which can also be found through an orbit-based analysis. Influences of the population of vortical structures contained in the domain and the time interval used for temporal prediction on the ML- ROM performance are also investigated. The potential and limitation of the present ML-ROM for turbulence analysis are discussed at the end of our presentation. △ Less

Submitted 22 January, 2021; v1 submitted 26 October, 2020; originally announced October 2020.

Journal ref: Phys. Fluids 33, 025116 (2021)

Cryogenic suspension design for a kilometer-scale gravitational-wave detector

Authors: Takafumi Ushiba, Tomotada Akutsu, Yoichi Aso, Sakae Araki, Rishabh Bajpai, Dan Chen, Kieran Craig, William Creus, Yutaro Enomoto, Yoshinori Fujii, Masashi Fukunaga, Ayako Hagiwara, Sadakazu Haino, Kunihiko Hasegawa, Yuki Inoue, Kiwamu Izumi, Nobuhiro Kimura, Keiko Kokeyama, Rahul Kumar, Ettore Majorana, Yuta Michimura, Takahiro Miyamoto, Shinji Miyoki, Iwao Murakami, Yoshikazu Namai , et al. (21 additional authors not shown)

Abstract: We report the mirror suspension design for Large-scale Cryogenic Gravitational wave Telescope, KAGRA, during bKAGRA Phase 1. Mirror thermal noise is one of the fundamental noises for room-temperature gravitational-wave detectors such as Advanced LIGO and Advanced Virgo. Thus, reduction of thermal noise is required for further improvement of their sensitivity. One effective approach for reducing th… ▽ More We report the mirror suspension design for Large-scale Cryogenic Gravitational wave Telescope, KAGRA, during bKAGRA Phase 1. Mirror thermal noise is one of the fundamental noises for room-temperature gravitational-wave detectors such as Advanced LIGO and Advanced Virgo. Thus, reduction of thermal noise is required for further improvement of their sensitivity. One effective approach for reducing thermal noise is to cool the mirrors. There are many technical challenges that must be overcome to cool the mirrors, such as cryocooler induced vibrations, thermal drift in suspensions, and reduction in duty cycling due to the increased number of potential failure mechanisms. Our mirror suspension has a black coating that makes radiative cooling more efficient. For conduction cooling, we developed ultra high purity aluminum heat links, which yield high thermal conductivity while keeping the spring constant sufficiently small. A unique inclination adjustment system, called moving mass, is used for aligning the mirror orientation in pitch. Photo-reflective displacement sensors, which have a large range, are installed for damping control on marionette recoil mass and intermediate recoil mass. Samarium cobalt magnets are used for coil-magnet actuators to prevent significant change of magnetism between room temperature and cryogenic temperature. In this paper, the design of our first cryogenic payload and its performance during bKAGRA Phase 1 are discussed. △ Less

Submitted 25 January, 2021; v1 submitted 5 October, 2020; originally announced October 2020.

Comments: 18 pages, 9 figures

Journal ref: Class. Quantum Grav. 38 085013 (2021)

The optical loss study of molecular layer for a cryogenic interferometric gravitational-wave detector

Authors: Satoshi Tanioka, Kunihiko Hasegawa, Yoichi Aso

Abstract: The detection of gravitational-waves provides us with a deep insight into the universe. In order to increase the number of detectable gravitational-wave sources, several future gravitational-wave detectors will operate with cryogenic mirrors. Recent studies, however, showed residual gas molecules inside the vacuum chamber adhere to the cryogenic mirror surface and form a molecular layer which grow… ▽ More The detection of gravitational-waves provides us with a deep insight into the universe. In order to increase the number of detectable gravitational-wave sources, several future gravitational-wave detectors will operate with cryogenic mirrors. Recent studies, however, showed residual gas molecules inside the vacuum chamber adhere to the cryogenic mirror surface and form a molecular layer which grows with time. The growing molecular layer introduces an additional optical loss in the mirror which can decrease the detector's performance. We theoretically estimate the optical loss by the molecular layer in a cryogenically operated gravitational-wave detector. The impacts on a cryogenic gravitational-wave detector is discussed based on the results of optical loss estimation. △ Less

Submitted 30 June, 2020; originally announced June 2020.

Report number: JGW-P2011765

Journal ref: Phys. Rev. D 102, 022009 (2020)

Overview of KAGRA: Detector design and construction history

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. -W. Bae, Y. -B. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. -L. Chan, C. -S. Chen, K. -H. Chen, Y. -R. Chen, H. -Y. Chu, Y-K. Chu, S. Eguchi, Y. Enomoto, R. Flaminio, Y. Fujii , et al. (175 additional authors not shown)

Abstract: KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA… ▽ More KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA finished all installations with the designed configuration, which we call the baseline KAGRA. In this occasion, we present an overview of the baseline KAGRA from various viewpoints in a series of of articles. In this article, we introduce the design configurations of KAGRA with its historical background. △ Less

Submitted 2 July, 2020; v1 submitted 12 May, 2020; originally announced May 2020.

Comments: 33 pages, 10 figures

Machine-learning-based reduced order modeling for unsteady flows around bluff bodies of various shapes

Authors: Kazuto Hasegawa, Kai Fukami, Takaaki Murata, Koji Fukagata

Abstract: We propose a method to construct a reduced order model with machine learning for unsteady flows. The present machine-learned reduced order model (ML-ROM) is constructed by combining a convolutional neural network autoencoder (CNN-AE) and a long short-term memory (LSTM), which are trained in a sequential manner. First, the CNN-AE is trained using direct numerical simulation (DNS) data so as to map… ▽ More We propose a method to construct a reduced order model with machine learning for unsteady flows. The present machine-learned reduced order model (ML-ROM) is constructed by combining a convolutional neural network autoencoder (CNN-AE) and a long short-term memory (LSTM), which are trained in a sequential manner. First, the CNN-AE is trained using direct numerical simulation (DNS) data so as to map the high-dimensional flow data into low-dimensional latent space. Then, the LSTM is utilized to establish a temporal prediction system for the low-dimensionalized vectors obtained by CNN-AE. As a test case, we consider flows around a bluff body whose shape is defined using a combination of trigonometric functions with random amplitudes. The present ML-ROMs are trained on a set of 80 bluff body shapes and tested on a different set of 20 bluff body shapes not used for training, with both training and test shapes chosen from the same random distribution. The flow fields are confirmed to be well reproduced by the present ML-ROM in terms of various statistics. We also focus on the influence of two main parameters: (1) the latent vector size in the CNN-AE, and (2) the time step size between the mapped vectors used for the LSTM. The present results show that the ML-ROM works well even for unseen shapes of bluff bodies when these parameters are properly chosen, which implies great potential for the present type of ML-ROM to be applied to more complex flows △ Less

Submitted 17 March, 2020; originally announced March 2020.

Comments: 18 pages, 20 figures

Journal ref: Theor. Comput. Fluid Dyn. 34, 367-383 (2020)

An arm length stabilization system for KAGRA and future gravitational-wave detectors

Authors: T. Akutsu, M. Ando, K. Arai, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, H. Chu, Y-K. Chu, K. Doi, S. Eguchi, Y. Enomoto , et al. (181 additional authors not shown)

Abstract: Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, wh… ▽ More Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner. △ Less

Submitted 28 November, 2019; v1 submitted 2 October, 2019; originally announced October 2019.

Comments: 21 pages, 8figures

Journal ref: Class. Quantum Grav. 37 (2020) 035004

First cryogenic test operation of underground km-scale gravitational-wave observatory KAGRA

Authors: KAGRA Collaboration, T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, W. Creus, K. Doi, K. Eda , et al. (179 additional authors not shown)

Abstract: KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic… ▽ More KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic motion at low frequencies and high stability of the detector. Another advantage is that it cools down the sapphire test mass mirrors to cryogenic temperatures to reduce thermal noise. In April-May 2018, we have operated a 3-km Michelson interferometer with a cryogenic test mass for 10 days, which was the first time that km-scale interferometer was operated at cryogenic temperatures. In this article, we report the results of this "bKAGRA Phase 1" operation. We have demonstrated the feasibility of 3-km interferometer alignment and control with cryogenic mirrors. △ Less

Submitted 11 January, 2019; originally announced January 2019.

Comments: 23 pages, 11 figures

Report number: JGW-P1809289

Journal ref: Classical and Quantum Gravity 36, 165008 (2019)

Vibration isolation system with a compact damping system for power recycling mirrors of KAGRA

Authors: Y. Akiyama, T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, V. Dattilo, K. Doi, Y. Enomoto, R. Flaminio, Y. Fujii , et al. (149 additional authors not shown)

Abstract: A vibration isolation system called Type-Bp system used for power recycling mirrors has been developed for KAGRA, the interferometric gravitational-wave observatory in Japan. A suspension of the Type-Bp system passively isolates an optic from seismic vibration using three main pendulum stages equipped with two vertical vibration isolation systems. A compact reaction mass around each of the main st… ▽ More A vibration isolation system called Type-Bp system used for power recycling mirrors has been developed for KAGRA, the interferometric gravitational-wave observatory in Japan. A suspension of the Type-Bp system passively isolates an optic from seismic vibration using three main pendulum stages equipped with two vertical vibration isolation systems. A compact reaction mass around each of the main stages allows for achieving sufficient damping performance with a simple feedback as well as vibration isolation ratio. Three Type-Bp systems were installed in KAGRA, and were proved to satisfy the requirements on the damping performance, and also on estimated residual displacement of the optics. △ Less

Submitted 10 January, 2019; originally announced January 2019.

A New Approach for Measuring the Muon Anomalous Magnetic Moment and Electric Dipole Moment

Authors: M. Abe, S. Bae, G. Beer, G. Bunce, H. Choi, S. Choi, M. Chung, W. da Silva, S. Eidelman, M. Finger, Y. Fukao, T. Fukuyama, S. Haciomeroglu, K. Hasegawa, K. Hayasaka, N. Hayashizaki, H. Hisamatsu, T. Iijima, H. Iinuma, K. Inami, H. Ikeda, M. Ikeno, K. Ishida, T. Itahashi, M. Iwasaki , et al. (71 additional authors not shown)

Abstract: This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon… ▽ More This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon $g-2$ experiments with unprecedented quality of the storage magnetic field. Additional significant differences from the present experimental method include a factor of 1,000 smaller transverse emittance of the muon beam (reaccelerated thermal muon beam), its efficient vertical injection into the solenoid, and tracking each decay positron from muon decay to obtain its momentum vector. The precision goal for $a_μ$ is statistical uncertainty of 450 part per billion (ppb), similar to the present experimental uncertainty, and a systematic uncertainty less than 70 ppb. The goal for EDM is a sensitivity of $1.5\times 10^{-21}~e\cdot\mbox{cm}$. △ Less

Submitted 10 March, 2019; v1 submitted 10 January, 2019; originally announced January 2019.

Comments: 24 pages, 14 figures

KAGRA: 2.5 Generation Interferometric Gravitational Wave Detector

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, S. Bae, L. Baiotti, M. A. Barton, K. Cannon, E. Capocasa, C-S. Chen, T-W. Chiu, K. Cho, Y-K. Chu, K. Craig, W. Creus, K. Doi, K. Eda, Y. Enomoto , et al. (169 additional authors not shown)

Abstract: The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Tel… ▽ More The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Telescope), a new GW detector with two 3-km baseline arms arranged in the shape of an "L", located inside the Mt. Ikenoyama, Kamioka, Gifu, Japan. KAGRA's design is similar to those of the second generations such as Advanced LIGO/Virgo, but it will be operating at the cryogenic temperature with sapphire mirrors. This low temperature feature is advantageous for improving the sensitivity around 100 Hz and is considered as an important feature for the third generation GW detector concept (e.g. Einstein Telescope of Europe or Cosmic Explorer of USA). Hence, KAGRA is often called as a 2.5 generation GW detector based on laser interferometry. The installation and commissioning of KAGRA is underway and its cryogenic systems have been successfully tested in May, 2018. KAGRA's first observation run is scheduled in late 2019, aiming to join the third observation run (O3) of the advanced LIGO/Virgo network. In this work, we describe a brief history of KAGRA and highlights of main feature. We also discuss the prospects of GW observation with KAGRA in the era of O3. When operating along with the existing GW detectors, KAGRA will be helpful to locate a GW source more accurately and to determine the source parameters with higher precision, providing information for follow-up observations of a GW trigger candidate. △ Less

Submitted 20 November, 2018; originally announced November 2018.

Comments: 6 pages, 3 figures (quality of some figures has been reduced)

Report number: JGW-P1809243

Journal ref: Nature Astronomy 3, 35 (2019)

First muon acceleration using a radio frequency accelerator

Authors: S. Bae, H. Choi, S. Choi, Y. Fukao, K. Futatsukawa, K. Hasegawa, T. Iijima, H. Iinuma, K. Ishida, N. Kawamura, B. Kim, R. Kitamura, H. S. Ko, Y. Kondo, S. Li, T. Mibe, Y. Miyake, T. Morishita, Y. Nakazawa, M. Otani, G. P. Razuvaev, N. Saito, K. Shimomura, Y. Sue, E. Won , et al. (1 additional authors not shown)

Abstract: Muons have been accelerated by using a radio frequency accelerator for the first time. Negative muonium atoms (Mu$^-$), which are bound states of positive muons ($μ^+$) and two electrons, are generated from $μ^+$'s through the electron capture process in an aluminum degrader. The generated Mu$^-$'s are initially electrostatically accelerated and injected into a radio frequency quadrupole linac (RF… ▽ More Muons have been accelerated by using a radio frequency accelerator for the first time. Negative muonium atoms (Mu$^-$), which are bound states of positive muons ($μ^+$) and two electrons, are generated from $μ^+$'s through the electron capture process in an aluminum degrader. The generated Mu$^-$'s are initially electrostatically accelerated and injected into a radio frequency quadrupole linac (RFQ). In the RFQ, the Mu$^-$'s are accelerated to 89 keV. The accelerated Mu$^-$'s are identified by momentum measurement and time of flight. This compact muon linac opens the door to various muon accelerator applications including particle physics measurements and the construction of a transmission muon microscope. △ Less

Submitted 21 March, 2018; originally announced March 2018.

Improvement of accuracy of the spectral element method for elastic wave computation using modified numerical integration operators

Authors: Kei Hasegawa, Nobuaki Fuji, Kensuke Konishi

Abstract: We introduce new numerical integration operators which compose the mass and stiffness matrices of a modified spectral element method for simulation of elastic wave propagation. While these operators use the same quadrature nodes as does the original spectral element method, they are designed in order that their harmonic responses have errors of the same ratio, and that the respective dispersion er… ▽ More We introduce new numerical integration operators which compose the mass and stiffness matrices of a modified spectral element method for simulation of elastic wave propagation. While these operators use the same quadrature nodes as does the original spectral element method, they are designed in order that their harmonic responses have errors of the same ratio, and that the respective dispersion errors of the mass and stiffness matrices cancel each other. As a result, the modified spectral element method yields two extra-orders of accuracy, and is comparable to the original method of one order higher. The theoretical results are confirmed by numerical dispersion analysis and examples of computation of waveforms using our operators. Replacing the ordinary operators by those proposed in this study could be a non-expensive solution to improve the accuracy. △ Less

Submitted 14 February, 2019; v1 submitted 9 January, 2018; originally announced January 2018.

Comments: 29 pages, 6 figures

Construction of KAGRA: an Underground Gravitational Wave Observatory

Authors: T. Akutsu, M. Ando, S. Araki, A. Araya, T. Arima, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, L. Baiotti, M. A. Barton, D. Chen, K. Cho, K. Craig, R. DeSalvo, K. Doi, K. Eda, Y. Enomoto, R. Flaminio, S. Fujibayashi, Y. Fujii, M. -K. Fujimoto, M. Fukushima, T. Furuhata , et al. (202 additional authors not shown)

Abstract: Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferomet… ▽ More Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferometer operation has been installed and the first test run was accomplished in March and April of 2016 with a rather simple configuration. The initial configuration of KAGRA is named {\it iKAGRA}. In this paper, we summarize the construction of KAGRA, including the study of the advantages and challenges of building an underground detector and the operation of the iKAGRA interferometer together with the geophysics interferometer that has been constructed in the same tunnel. △ Less

Submitted 11 December, 2017; v1 submitted 30 November, 2017; originally announced December 2017.

Comments: Resolution of some figures has been decreased from its original version submitted to a journal

Journal ref: Progress of Theoretical and Experimental Physics, Vol 2018, 1, 013F01

The status of KAGRA underground cryogenic gravitational wave telescope

Authors: KAGRA Collaboration, T. Akutsu, M. Ando, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Atsuta, K. Awai, M. A. Barton, K. Cannon, K. Craig, W. Creus, K. Doi, K. Eda, Y. Enomoto, R. Flaminio, Y. Fujii, M. -K. Fujimoto, T. Furuhata, S. Haino, K. Hasegawa, K. Hashino, K. Hayama, S. Hirobayashi , et al. (126 additional authors not shown)

Abstract: KAGRA is a 3-km interferometric gravitational wave telescope located in the Kamioka mine in Japan. It is the first km-class gravitational wave telescope constructed underground to reduce seismic noise, and the first km-class telescope to use cryogenic cooling of test masses to reduce thermal noise. The construction of the infrastructure to house the interferometer in the tunnel, and the initial ph… ▽ More KAGRA is a 3-km interferometric gravitational wave telescope located in the Kamioka mine in Japan. It is the first km-class gravitational wave telescope constructed underground to reduce seismic noise, and the first km-class telescope to use cryogenic cooling of test masses to reduce thermal noise. The construction of the infrastructure to house the interferometer in the tunnel, and the initial phase operation of the interferometer with a simple 3-km Michelson configuration have been completed. The first cryogenic operation is expected in 2018, and the observing runs with a full interferometer are expected in 2020s. The basic interferometer configuration and the current status of KAGRA are described. △ Less

Submitted 13 October, 2017; originally announced October 2017.

Comments: 7 pages, 2 figures. Proceedings for XV International Conference on Topics in Astroparticle and Underground Physics (TAUP2017), Sudbury, July 24-28, 2017

Report number: JGW-P1707191

Journal ref: J. Phys.: Conf. Ser. 1342, 012014 (2020)

Electronically Steerable Ultrasound-Driven Air Stream

Authors: Keisuke Hasegawa, Liwei Qiu, Akihito Noda, Seki Inoue, Hiroyuki Shinoda

Abstract: We have created a stretching air flow by generating a Bessel beam of ultrasound with an active phased array of acoustic transducers in free space. The generated Bessel beam is electronically steerable in terms of its position and direction of propagation. The fastest spot in the flow could be located apart from the sound source itself. The flow is formed immediately after the sound field is genera… ▽ More We have created a stretching air flow by generating a Bessel beam of ultrasound with an active phased array of acoustic transducers in free space. The generated Bessel beam is electronically steerable in terms of its position and direction of propagation. The fastest spot in the flow could be located apart from the sound source itself. The flow is formed immediately after the sound field is generated, which can be electronically accomplished with the phased array that we fabricated. We formulate the basic technique for realizing such air-borne flows and experimentally describe their physical properties. Our technique would be capable of controlling the air flow in free-space with an improved temporal and spatial resolution compared with those conventionally considered. △ Less

Submitted 3 April, 2017; v1 submitted 2 April, 2017; originally announced April 2017.

Oscillation of a Rotating Levitated Droplet: Analysis with a Mechanical Model

Authors: Hiroyuki Kitahata, Rui Tanaka, Yuki Koyano, Satoshi Matsumoto, Katsuhiro Nishinari, Tadashi Watanabe, Koji Hasegawa, Tetsuya Kanagawa, Akiko Kaneko, Yutaka Abe

Abstract: A droplet of millimeter-to-centimeter scale can exhibit electrostatic levitation, and such levitated droplets can be used for the measurement of the surface tension of the liquids by observing the characteristic frequency of oscillatory deformation. In the present study, a simple mechanical model is proposed by considering a single mode of oscillation in the ellipsoidal deformation of a levitated… ▽ More A droplet of millimeter-to-centimeter scale can exhibit electrostatic levitation, and such levitated droplets can be used for the measurement of the surface tension of the liquids by observing the characteristic frequency of oscillatory deformation. In the present study, a simple mechanical model is proposed by considering a single mode of oscillation in the ellipsoidal deformation of a levitated rotating droplet. By measuring the oscillation frequency with respect to the rotational speed and oscillation amplitude, it is expected that the accuracy of the surface tension measurement could be improved. Using the proposed model, the dependences of the characteristic frequency of oscillatory deformation and the averaged aspect ratio are calculated with respect to the rotational angular velocity of a rotating droplet. These dependences are found to be consistent with the experimental observations. △ Less

Submitted 28 July, 2015; originally announced July 2015.

Comments: 9 pages, 7 figures

Journal ref: Physical Review E, 92, 062904 (2015)

Asymmetric Reflectance and Cluster Size Effects in Silver Percolation Films

Authors: Nicholas A. Kuhta, Aiqing Chen, Keisuke Hasegawa, Miriam Deutsch, Viktor A. Podolskiy

Abstract: We develop a quantitative description of giant asymmetry in reflectance, recently observed in semicontinuous metal films. The developed scaling-theory based technique reproduces the spectral properties of semicontinuous composites, as well as provides insight into the origin of experimentally observed loss, reflectance, and transmittance anomalies in the vicinity of the percolation threshold. We develop a quantitative description of giant asymmetry in reflectance, recently observed in semicontinuous metal films. The developed scaling-theory based technique reproduces the spectral properties of semicontinuous composites, as well as provides insight into the origin of experimentally observed loss, reflectance, and transmittance anomalies in the vicinity of the percolation threshold. △ Less

Submitted 24 October, 2011; v1 submitted 6 August, 2011; originally announced August 2011.

Comments: 6 pages, 5 figures

Summary of the J-PARC UCN Taskforce

Authors: The J-Parc Ucn Taskforce, :, Tomokazu Aso, Masatoshi Futakawa, Tomiyoshi Haruyama, Kazuo Hasegawa, Yujiro Ikeda, Masanori Ikegami, Yukihide Kamiya, Takashi Kato, Nobuhiro Kimura, Yoshiaki Kiyanagi, Yasuo Maekawa, Yasuhiro Masuda, Taichi Miura, Masaharu Numajiri, Toru Ogitsu, Nobuo Ouchi, Kotaro Sato, Hirohiko Shimizu, Eiichi Takasaki, Nobuyuki Takenaka, Akira Yamamoto, Satoru Yamashita

Abstract: Discussions in the taskforce meetings in the period of Jan.-Mar. 2009 on the technical possibility of the ultracold neutron (UCN) source at the Japan Proton Accelerator Research Complex (J-PARC) is summarized. Discussions in the taskforce meetings in the period of Jan.-Mar. 2009 on the technical possibility of the ultracold neutron (UCN) source at the Japan Proton Accelerator Research Complex (J-PARC) is summarized. △ Less

Submitted 2 July, 2009; originally announced July 2009.

Comments: 13 pages, 16 figures

Curvature-induced radiation of surface plasmon polaritons propagating around bends

Authors: Keisuke Hasegawa, Jens U. Noeckel, Miriam Deutsch

Abstract: We present a theoretical study of the curvature-induced radiation of surface plasmon polaritons (SPPs) propagating around bends at metal-dielectric interfaces. We explain qualitatively how the curvature leads to distortion of the phase front, causing the fields to radiate energy away from the metal-dielectric interface. We then quantify, both analytically and numerically, radiation losses and en… ▽ More We present a theoretical study of the curvature-induced radiation of surface plasmon polaritons (SPPs) propagating around bends at metal-dielectric interfaces. We explain qualitatively how the curvature leads to distortion of the phase front, causing the fields to radiate energy away from the metal-dielectric interface. We then quantify, both analytically and numerically, radiation losses and energy transmission efficiencies of SPPs propagating around bends with varying radii- as well as sign-of-curvature. △ Less

Submitted 14 March, 2007; originally announced March 2007.

Comments: 9 pages, 8 figures, submitted to Physical Review E

Journal ref: Phys. Rev. A 75, 063816 (2007)

Metamaterial Coatings for Broadband Asymmetric Mirrors

Authors: Aiqing Chen, Keisuke Hasegawa, Miriam Deutsch, Viktor A. Podolskiy

Abstract: We report on design and fabrication of nano-composite metal-dielectric thin film coatings with high reflectance asymmetries. Applying basic dispersion engineering principles to model a broadband and large reflectance asymmetry, we obtain a model dielectric function for the metamaterial film, closely resembling the effective permittivity of disordered metal-dielectric nano-composites. Coatings re… ▽ More We report on design and fabrication of nano-composite metal-dielectric thin film coatings with high reflectance asymmetries. Applying basic dispersion engineering principles to model a broadband and large reflectance asymmetry, we obtain a model dielectric function for the metamaterial film, closely resembling the effective permittivity of disordered metal-dielectric nano-composites. Coatings realized using disordered nanocrystalline silver films deposited on glass substrates confirm the theoretical predictions, exhibiting symmetric transmittance, large reflectance asymmetries and a unique flat reflectance asymmetry. △ Less

Submitted 10 March, 2007; v1 submitted 10 November, 2006; originally announced November 2006.

Comments: 4 pages, 4 figures, submitted to Optics Letters

Journal ref: Opt. Lett. 32, 1770-1772 (2007)

Plasmon Assisted Transparency in Metal--Dielectric Microspheres

Authors: Charles Rohde, Keisuke Hasegawa, Miriam Deutsch

Abstract: We present a theoretical analysis of light scattering from a layered metal-dielectric microsphere. The system consists of two spherical resonators, coupled through concentric embedding. Solving for the modes of this system we find that near an avoided crossing the scattering cross section is dramatically suppressed, exhibiting a tunable optical transparency. Similar to electromagnetically induce… ▽ More We present a theoretical analysis of light scattering from a layered metal-dielectric microsphere. The system consists of two spherical resonators, coupled through concentric embedding. Solving for the modes of this system we find that near an avoided crossing the scattering cross section is dramatically suppressed, exhibiting a tunable optical transparency. Similar to electromagnetically induced transparency, this phenomenon is associated with a large group delay, which in our system is manifest as flat azimuthal dispersion. △ Less

Submitted 20 September, 2006; originally announced September 2006.

Comments: Submitted to Optics Letters, Sep 13th

Enhanced surface plasmon resonance absorption in metal-dielectric-metal layered microspheres

Authors: Keisuke Hasegawa, Charles A. Rohde, Miriam Deutsch

Abstract: We present a theoretical study of the dispersion relation of surface plasmon resonances of mesoscopic metal-dielectric-metal microspheres. By analyzing the solutions to Maxwell's equations, we obtain a simple geometric condition for which the system exhibits a band of surface plasmon modes whose resonant frequencies are weakly dependent on the multipole number. Using a modified Mie calculation,… ▽ More We present a theoretical study of the dispersion relation of surface plasmon resonances of mesoscopic metal-dielectric-metal microspheres. By analyzing the solutions to Maxwell's equations, we obtain a simple geometric condition for which the system exhibits a band of surface plasmon modes whose resonant frequencies are weakly dependent on the multipole number. Using a modified Mie calculation, we find that a large number of modes belonging to this flat-dispersion band can be excited simultaneously by a plane wave, thus enhancing the absorption cross-section. We demonstrate that the enhanced absorption peak of the sphere is geometrically tunable over the entire visible range. △ Less

Submitted 18 January, 2006; v1 submitted 29 November, 2005; originally announced November 2005.

Comments: 4 pages, 3 figures, Accepted for publication, Optics Letters. Revisions upon final review

Journal ref: Opt. Lett. 31, 1136 (2006)

Coherent Light Scattering from Semicontinuous Silver Nanoshells Near the Percolation Threshold

Authors: Charles A. Rohde, Keisuke Hasegawa, Miriam Deutsch

Abstract: We report on measurements of visible extinction spectra of semicontinuous silver nanoshells grown on colloidal silica spheres. We find that thin, fractal shells below the percolation threshold exhibit geometrically tunable plasmon resonances. A modified scaling theory approach is used to model the dielectric response of such shells, which is then utilized to obtain the extinction cross section i… ▽ More We report on measurements of visible extinction spectra of semicontinuous silver nanoshells grown on colloidal silica spheres. We find that thin, fractal shells below the percolation threshold exhibit geometrically tunable plasmon resonances. A modified scaling theory approach is used to model the dielectric response of such shells, which is then utilized to obtain the extinction cross section in a retarded Mie scattering formalism. We show that such spherical resonators support unique plasmon dynamics: in the visible there is a new regime of coherently driven cluster-localized plasmons, while crossover to homogeneous response in the infrared predicts a delocalized shell plasmon. △ Less

Submitted 17 January, 2006; v1 submitted 29 August, 2005; originally announced August 2005.

Comments: 5 pages, 4 figures : Accepted for publication, PRL, Feb 6 2003. Additional changes after final review

Surface plasmon polariton propagation around bends at a metal-dielectric interface

Authors: Keisuke Hasegawa, Jens U. Noeckel, Miriam Deutsch

Abstract: We analyze theoretically the propagation of surface plasmon polaritons about a metallic corner with a finite bend radius, using a one-dimensional model analogous to the scattering from a finite-depth potential well. We obtain expressions for the energy reflection and transmission coefficients in the short wavelength limit, as well as an upper bound for the transmittance. In certain cases we find… ▽ More We analyze theoretically the propagation of surface plasmon polaritons about a metallic corner with a finite bend radius, using a one-dimensional model analogous to the scattering from a finite-depth potential well. We obtain expressions for the energy reflection and transmission coefficients in the short wavelength limit, as well as an upper bound for the transmittance. In certain cases we find that propagation on non-planar interfaces may result in lower losses than on flat surfaces, contrary to expectation. In addition, we also find that the maximum transmittance depends non-monotonously on the bend radius, allowing increased transmission with decreasing radius. △ Less

Submitted 29 June, 2004; originally announced June 2004.

Comments: For higher-quality figures, see http://darkwing.uoregon.edu/~noeckel/papers.php#xref27

Journal ref: Appl. Phys. Lett. 84, Vol. 1835 (2004)

New 357 MHz Sub Harmonic Buncher

Authors: Masao Kuriki, Hitoshi Hayano, Katsushi Hasegawa

Abstract: KEK-ATF is doing R&D establishing high-current and low-emittance electron beam for the future linear colliders. In ATF, 15 ps length electron beam is generated by combination of a thermionic gun, a couple of 357 MHz SHBs, and a S-band TW buncher. In the linac, beam instability caused by the fluctuated amplitude and phase of SHBs has been observed. The reason of the fluctuation is considered to b… ▽ More KEK-ATF is doing R&D establishing high-current and low-emittance electron beam for the future linear colliders. In ATF, 15 ps length electron beam is generated by combination of a thermionic gun, a couple of 357 MHz SHBs, and a S-band TW buncher. In the linac, beam instability caused by the fluctuated amplitude and phase of SHBs has been observed. The reason of the fluctuation is considered to be the multi-pacting in the SHB cavity. In addition, Q value of the cavity is almost half of the designed value, then SHBs are not operated in an optimum condition. We have fabricated new SHBs with considerations avoiding the multi-pacting and recovering Q value. A simulation shows that bunching quality is improved with the new SHB cavity. △ Less

Submitted 26 June, 2001; originally announced June 2001.

Comments: 3pages, 26th linac accelerator meeting 1P-26 at Tsukuba, Japan

Multi-bunch generation by thermionic gun

Authors: M. Kuriki, H. Hayano, T. Naito, K. Hasegawa

Abstract: KEK-ATF is studying the low-emittance multi-bunch electron beam for the future linear collider. In ATF, thermionic gun is used to generate 20 bunches electron beam with the bunch spacing of 2.8 ns. Due to a distortion of the gun emission and the beam loading effect in the bunching system, the intensity for each bunch is not uniform by up to 40 % at the end of the injector. We have developed a sy… ▽ More KEK-ATF is studying the low-emittance multi-bunch electron beam for the future linear collider. In ATF, thermionic gun is used to generate 20 bunches electron beam with the bunch spacing of 2.8 ns. Due to a distortion of the gun emission and the beam loading effect in the bunching system, the intensity for each bunch is not uniform by up to 40 % at the end of the injector. We have developed a system to correct the gun emission by precisely controlling the cathode voltage with a function generator. For the beam loading effect, we have introduced RF amplitude modulation on Sub Harmonic Buncher, SHB. By these technique, bunch intensity uniformity was improved and beam transmission for later bunches was recovered from 67% to 91%, but intensity for first five bunches is still lower than others. △ Less

Submitted 23 March, 2001; originally announced March 2001.

Comments: HEACC01 proceedings

Development of Superconducting Linac for the Kek/Jaeri Joint Project

Authors: M. Mizumoto, N. Ouchi, J. Kusano, E. Chishiro, K. Hasegawa, N. Akaoka, K. Saito, S. Noguchi, E. Kako, H. Inoue, T. Shishido, M. Ono, K. Mukugi, C. Tsukishima, O. Takeda, M. Matsuoka

Abstract: The JAERI/KEK Joint Project for the high-intensity proton accelerator facility has been proposed with a superconducting (SC) linac option from 400 MeV to 600MeV. System design of the SC linac has been carried out based on the equipartitioning concept. The SC linac is planned to use as an injector to a 3GeV rapid cycling synchrotron (RCS) for spallation neutron source after it meets requirement t… ▽ More The JAERI/KEK Joint Project for the high-intensity proton accelerator facility has been proposed with a superconducting (SC) linac option from 400 MeV to 600MeV. System design of the SC linac has been carried out based on the equipartitioning concept. The SC linac is planned to use as an injector to a 3GeV rapid cycling synchrotron (RCS) for spallation neutron source after it meets requirement to momentum spread less than +-0.1%. In the R&D work for SC cavities, vertical tests of single-cell and 5 cell cavities were performed. Experiments on multi-cell (5 cell) cavities of b=0.50 and b=0.89 at 2K were carried out with values of maximum electric surface peak fields of 23MV/m and 31MV/m, respectively. A model describing dynamic Lorentz detuning for SC cavities has been developed for pulse mode operation. Validity of the model was confirmed experimentally to simulate the performance. △ Less

Submitted 19 August, 2000; originally announced August 2000.

Comments: LINAC2000 conference, TUD09, 3 pages, 5 figures

Journal ref: eConf C000821 (2000) TUD09