Showing 1–20 of 20 results for author: Hart, A J

Spreading of highly cohesive metal powders with transverse oscillation kinematics

Authors: Reimar Weissbach, Garrett Adams, Patrick M. Praegla, Christoph Meier, A. John Hart

Abstract: Powder bed additive manufacturing processes such as laser powder bed fusion (LPBF) or binder jetting (BJ) benefit from using fine (D50 $\leq20~μm$) powders. However, the increasing level of cohesion with decreasing particle size makes spreading a uniform and continuous layer challenging. As a result, LPBF typically employs a coarser size distribution, and rotating roller mechanisms are used in BJ… ▽ More Powder bed additive manufacturing processes such as laser powder bed fusion (LPBF) or binder jetting (BJ) benefit from using fine (D50 $\leq20~μm$) powders. However, the increasing level of cohesion with decreasing particle size makes spreading a uniform and continuous layer challenging. As a result, LPBF typically employs a coarser size distribution, and rotating roller mechanisms are used in BJ machines, that can create wave-like surface profiles due to roller run-out. In this work, a transverse oscillation kinematic for powder spreading is proposed, explored computationally, and validated experimentally. Simulations are performed using an integrated discrete element-finite element (DEM-FEM) framework and predict that transverse oscillation of a non-rotating roller facilitates the spreading of dense powder layers (beyond 50% packing fraction) with a high level of robustness to kinematic parameters. The experimental study utilizes a custom-built mechanized powder spreading testbed and X-ray transmission imaging for the analysis of spread powder layers. Experimental results generally validate the computational results, however, also exhibit parasitic layer cracking. For transverse oscillation frequencies above 200 Hz, powder layers of high packing fraction (between 50-60%) were formed, and for increased layer thicknesses, highly uniform and continuous layers were deposited. Statistical analysis of the experimental powder layer morphology as a function of kinematic spreading parameters revealed that an increasing transverse surface velocity improves layer uniformity and reduces cracking defects. This suggests that with minor improvements to the machine design, the proposed transverse oscillation kinematic has the potential to result in thin and consistently uniform powder layers of highly cohesive powder. △ Less

Submitted 26 April, 2025; originally announced April 2025.

Radiometric Temperature Measurement for Metal Additive Manufacturing via Temperature Emissivity Separation

Authors: Ryan W. Penny, A. John Hart

Abstract: Emission of blackbody emission from the meltpool and surrounding area in laser powder bed fusion (LPBF) makes this process visible to a range of optical monitoring instruments intended for online process and quality control. Yet, these instruments have yet to prove capable of reliably detecting the finest flaws that influence LPBF component mechanical performance, limiting their adoption. One hind… ▽ More Emission of blackbody emission from the meltpool and surrounding area in laser powder bed fusion (LPBF) makes this process visible to a range of optical monitoring instruments intended for online process and quality control. Yet, these instruments have yet to prove capable of reliably detecting the finest flaws that influence LPBF component mechanical performance, limiting their adoption. One hindrance lies in interpreting measurements of radiance as temperature, despite the physical link between these variables being readily understood as a combination of Plank's Law and spectral emissivity. Uncertainty in spectral emissivity arises as it is nearly impossible to predict and can be a strong function of wavelength; in turn, this manifests uncertainty in estimated temperatures and thereby obscures the LPBF process dynamics that indicate component defects. This paper presents temperature emissivity separation (TES) as a method for accurate retrieval of optically-measured temperatures in LPBF. TES simultaneously calculates both temperature and spectral emissivity from spectrally-resolved radiance measurements and, as the latter term is effectively measured, more accurate process temperatures result. Using a bespoke imaging spectrometer integrated with an LPBF testbed to evaluate this approach, three basic TES algorithms are compared in a validation experiment that demonstrates retrieval of temperatures accurate to $\pm 28$ K over a $1000$ K range. A second investigation proves industrial feasibility through fabrication of an LPBF test artifact. Temperature data are used to study the evolution of fusion process boundary conditions, including a decrease in cooling rate as layerwise printing proceeds. A provisional correlation of temperature fields to component porosity assessed by 3D computed tomography demonstrates in situ optical detection of micron-scale porous defects in LPBF. △ Less

Submitted 11 February, 2025; originally announced February 2025.

High-Fidelity Optical Monitoring of Laser Powder Bed Fusion via Aperture Division Multiplexing

Authors: Ryan W. Penny, Zachery Kutschke, A. John Hart

Abstract: Qualification of high-performance metal components produced by laser powder bed fusion (LPBF) must identify process-induced porous defects that reduce ductility and nucleate fatigue cracking. Detecting such defects via optical monitoring of LPBF provides a path towards in-process quality control without downstream testing such as by computed tomography. However, integration of in-process sensing w… ▽ More Qualification of high-performance metal components produced by laser powder bed fusion (LPBF) must identify process-induced porous defects that reduce ductility and nucleate fatigue cracking. Detecting such defects via optical monitoring of LPBF provides a path towards in-process quality control without downstream testing such as by computed tomography. However, integration of in-process sensing with LPBF is hampered by geometric and optical complications and, as a result, it has yet to be proven that the finest pores that limit component fatigue life can be resolved via in situ data. We present aperture division multiplexing (ADM) as a method for simultaneously focusing the process laser and providing unobstructed optical access for high-fidelity process monitoring using a common optic. Construction of an ADM optic of achieving imaging at 50 micron spatial resolution in the mid-wave infrared is described, and this optic is demonstrated on a production-representative LPBF testbed. High-speed infrared video data are correlated to micro-CT measurement of pores as fine as 4.3 microns, through multiple process signatures, establishing the promise of ADM for qualification of LPBF component fatigue performance. △ Less

Submitted 20 November, 2024; originally announced November 2024.

Automated Segmentation and Analysis of Microscopy Images of Laser Powder Bed Fusion Melt Tracks

Authors: Aagam Shah, Reimar Weissbach, David A. Griggs, A. John Hart, Elif Ertekin, Sameh Tawfick

Abstract: With the increasing adoption of metal additive manufacturing (AM), researchers and practitioners are turning to data-driven approaches to optimise printing conditions. Cross-sectional images of melt tracks provide valuable information for tuning process parameters, developing parameter scaling data, and identifying defects. Here we present an image segmentation neural network that automatically id… ▽ More With the increasing adoption of metal additive manufacturing (AM), researchers and practitioners are turning to data-driven approaches to optimise printing conditions. Cross-sectional images of melt tracks provide valuable information for tuning process parameters, developing parameter scaling data, and identifying defects. Here we present an image segmentation neural network that automatically identifies and measures melt track dimensions from a cross-section image. We use a U-Net architecture to train on a data set of 62 pre-labelled images obtained from different labs, machines, and materials coupled with image augmentation. When neural network hyperparameters such as batch size and learning rate are properly tuned, the learned model shows an accuracy for classification of over 99% and an F1 score over 90%. The neural network exhibits robustness when tested on images captured by various users, printed on different machines, and acquired using different microscopes. A post-processing module extracts the height and width of the melt pool, and the wetting angles. We discuss opportunities to improve model performance and avenues for transfer learning, such as extension to other AM processes such as directed energy deposition. △ Less

Submitted 1 October, 2024; v1 submitted 26 September, 2024; originally announced September 2024.

Comments: 21 pages, 10 figures

A rapid experimental workflow for studying melt track scaling in laser powder bed fusion using high-precision metal template substrates

Authors: Reimar Weissbach, Ryan W. Penny, A. John Hart

Abstract: Development and qualification of process parameters in laser powder bed fusion (LPBF) commonly involves many variables. At the outset of development, whether transferring known parameters to a new machine, or exploring a new material, single-track and single-layer experiments are a convenient means of down-selecting key variables and exploring parameter scaling behavior. We present an experimental… ▽ More Development and qualification of process parameters in laser powder bed fusion (LPBF) commonly involves many variables. At the outset of development, whether transferring known parameters to a new machine, or exploring a new material, single-track and single-layer experiments are a convenient means of down-selecting key variables and exploring parameter scaling behavior. We present an experimental workflow for single-layer LPBF experiments using etched high-precision metal template substrates, overcoming challenges with precision single-layer alignment in LPBF systems and enabling efficient processing and cross-sectional analysis. Templates are fabricated using chemical etching and machining, and are characterized using optical profilometry and X-ray transmission imaging of powder layers. Using the templates a single-track parameter study is performed in SS316 including three powder layer thicknesses, and spanning common laser melting modes (lack-of-fusion, conduction, and keyhole mode). Analysis of melt track geometries using automated image processing allows a scaling law to be applied to define the process window, quantifying the amount of material added with increasing powder layer thickness. Single-track results are verified with raster scanning experiments, showing the potential to transfer single-track results to full LPBF builds. △ Less

Submitted 30 September, 2024; v1 submitted 22 September, 2024; originally announced September 2024.

Learning to write with the fluid rope trick

Authors: Gaurav Chaudhary, Stephanie Christ, A John Hart, L Mahadevan

Abstract: The range and speed of direct ink writing, the workhorse of 3d and 4d printing, is limited by the practice of liquid extrusion from a nozzle just above the surface to prevent instabilities to cause deviations from the required print path. But what if could harness the ``fluid rope trick", whence a thin stream of viscous fluid falling from a height spontaneously folds or coils, to write specified p… ▽ More The range and speed of direct ink writing, the workhorse of 3d and 4d printing, is limited by the practice of liquid extrusion from a nozzle just above the surface to prevent instabilities to cause deviations from the required print path. But what if could harness the ``fluid rope trick", whence a thin stream of viscous fluid falling from a height spontaneously folds or coils, to write specified patterns on a substrate? Using Deep Reinforcement Learning we control the motion of the extruding nozzle and thence the fluid patterns that are deposited on the surface. The learner (nozzle) repeatedly interacts with the environment (a viscous filament simulator), and improves its strategy using the results of this experience. We demonstrate the results in an experimental setting where the learned motion control instructions are used to drive a viscous jet to accomplish complex tasks such as cursive writing and Pollockian paintings. △ Less

Submitted 11 February, 2023; originally announced February 2023.

Quantitative analysis of thin metal powder layers via transmission X-ray imaging and discrete element simulation: Blade-based spreading approaches

Authors: Ryan W. Penny, Daniel Oropeza, Patrick M. Praegla, Reimar Weissbach, Christoph Meier, Wolfgang A. Wall, A. John Hart

Abstract: Spreading uniform and dense layers is of paramount importance to creating high-quality components using powder bed additive manufacturing (AM). Blade-like tools are often employed for spreading powder metal feedstocks, especially in laser powder bed fusion and electron beam melting, where powders are characterized by a D50 of 30 microns or greater. Along with variations in boundary conditions intr… ▽ More Spreading uniform and dense layers is of paramount importance to creating high-quality components using powder bed additive manufacturing (AM). Blade-like tools are often employed for spreading powder metal feedstocks, especially in laser powder bed fusion and electron beam melting, where powders are characterized by a D50 of 30 microns or greater. Along with variations in boundary conditions introduced by the layer-wise geometry and surface topography of the printed component, stochastic interactions between the spreading tool and powder result in spatial variations of layer quality that are still not well understood. Here, to study powder spreading under conditions representative of powder bed AM, we employ a modular, mechanized apparatus to create powder layers from moderately and highly cohesive powders with a selection of blade-like spreading tools. Powder layer effective depth is spatially mapped using transmission X-ray imaging, and uniformity is quantified via a statistical approach. We first compare layer density, or the effective depth of powder layer, and show that blade geometries with a curved profile lead to increased material deposition. Second, this approach enables quantification of local fluctuations, or layer defect severity. For example, we observe that the primary benefit of a V-shaped rubber blade, as compared to a 45 degree rigid blade, lies in enabling local deflection of the blade edge to eliminate streaking from large particles, while also increasing deposition. Additionally, we employ a custom DEM simulation to elucidate the opposing roles of particle density and surface energy with a pseudo-material approach, where the balance of inertial and cohesive forces determine macro-scale powder flowability. For specific alloy densities, we find a critical surface energy beyond which layer density is greatly impaired when powder spreading is performed using a blade. △ Less

Submitted 9 September, 2022; originally announced September 2022.

Quantitative analysis of thin metal powder layers via transmission X-ray imaging and discrete element simulation: Roller-based spreading approaches

Authors: Ryan W. Penny, Daniel Oropeza, Reimar Weissbach, Patrick M. Praegla, Christoph Meier, Wolfgang A. Wall, A. John Hart

Abstract: A variety of tools can be used for spreading metal, ceramic, and polymer feedstocks in powder bed additive manufacturing methods. Rollers are often employed when spreading powders with limited flowability, as arises in powders comprising fine particle sizes or high surface energy materials. Here, we study roller-based powder spreading for powder bed AM using the unique combination of a purpose-bui… ▽ More A variety of tools can be used for spreading metal, ceramic, and polymer feedstocks in powder bed additive manufacturing methods. Rollers are often employed when spreading powders with limited flowability, as arises in powders comprising fine particle sizes or high surface energy materials. Here, we study roller-based powder spreading for powder bed AM using the unique combination of a purpose-built powder spreading testbed with a proven method for X-ray mapping of powder layer depth. We focus on the density and uniformity of nominally 100 micrometer thick layers of roller-spread Ti-6Al-4V and Al-10Si-Mg powders. Our results indicate that when rotation is too rapid, roller-applied shear force impedes the creation of dense and uniform layers from powders of high innate flowability, or where inertial forces driven by particle density dominate cohesive forces. Roller counter-rotation augments the uniformity of cohesive powder layers, primarily though reducing the influence of particle clusters in the flowing powder, which are otherwise shown to cause deep, trench-like streaks. Companion discrete element method (DEM) simulations further contextualize the experiments through isolation of the effects of cohesion on layer attributes. Results suggest that roller motion parameters could apply a strategic level of additional shear force to the flowing powder, thereby mitigating the clumping behavior characteristic of highly cohesive feedstocks while maintaining high layer uniformity. △ Less

Submitted 9 September, 2022; originally announced September 2022.

A spiral laser scanning routine for powder bed fusion inspired by natural predator-prey behavior

Authors: Suh In Kim, A. John Hart

Abstract: Additive manufacturing by laser powder bed fusion (LPBF) offers material versatility, capability for complex geometries, and control of mechanical properties and microstructure. However, achieving high-quality output requires process parameters that consider both local and global thermal gradients. Here, we propose a new scan pattern for mitigating part quality issues caused by non-uniform heating… ▽ More Additive manufacturing by laser powder bed fusion (LPBF) offers material versatility, capability for complex geometries, and control of mechanical properties and microstructure. However, achieving high-quality output requires process parameters that consider both local and global thermal gradients. Here, we propose a new scan pattern for mitigating part quality issues caused by non-uniform heating and cooling. A nature-inspired design method is employed to derive a spiral pattern stemming from the predator-prey behavior, and a power optimization routine is applied to maintain constant melt pool depth. Comparing simulated thermal histories for the spiral pattern to well-established zig-zag and helix scan patterns, we propose that the spiral pattern significantly reduces the spatial variation of temperature across the scan area, while a larger area remains above a specified threshold temperature at the end of the scan. Consequently, the spiral pattern is promising for LPBF of crack-prone materials, and for future optimization of LPBF overall. △ Less

Submitted 2 November, 2021; originally announced November 2021.

Comments: 14 figures

Printable, castable, nanocrystalline cellulose-epoxy composites exhibiting hierarchical nacre-like toughening

Authors: Abhinav Rao, Thibaut Divoux, Crystal Owens, A. John Hart

Abstract: Due to their exceptional mechanical and chemical properties and their natural abundance, cellulose nanocrystals (CNCs) are promising building blocks of sustainable polymer composites. However, the rapid gelation of CNC dispersions has generally limited CNC-based composites to low CNC fractions, in which polymer remains the dominant phase. Here we report on the formulation and processing of crossli… ▽ More Due to their exceptional mechanical and chemical properties and their natural abundance, cellulose nanocrystals (CNCs) are promising building blocks of sustainable polymer composites. However, the rapid gelation of CNC dispersions has generally limited CNC-based composites to low CNC fractions, in which polymer remains the dominant phase. Here we report on the formulation and processing of crosslinked CNC-epoxy composites with a CNC fraction exceeding 50 wt.%. The microstructure comprises sub-micrometer aggregates of CNCs crosslinked to polymer, which are analogous to the lamellar structure of nacre and promotes toughening mechanisms associated with bulk ductile behavior, despite the brittle behavior of the aggregates at the nanoscale. At 63 wt.% CNCs, the composites exhibit a hardness of 0.66 GPa and a fracture toughness of 5.2 MPa.m$^{1/2}$. The hardness of this all-organic material is comparable to aluminum alloys, and the fracture toughness at the centimeter scale is comparable to that of wood cell wall. We show that CNC-epoxy composite objects can be shaped from the gel precursors by direct-write printing and by casting, while the cured composites can be machined into complex 3D shapes. The formulation, processing route, and the insights on toughening mechanisms gained from our multiscale approach can be applied broadly to highly loaded nanocomposites. △ Less

Submitted 19 August, 2021; originally announced August 2021.

A Testbed for Investigation of Selective Laser Melting at Elevated Atmospheric Pressure

Authors: David A. Griggs, Jonathan S. Gibbs, Stuart P. Baker, Ryan W. Penny, Martin C. Feldmann, A. John Hart

Abstract: Metal additive manufacturing (AM) by laser powder bed fusion (L-PBF) builds upon fundamentals established in the field of laser welding which include the influence of gas and plume dynamics on weld depth and quality. L-PBF demands a thorough investigation of the complex thermophysical phenomena that occur where the laser interacts with the metal powder bed. In particular, melt pool turbulence and… ▽ More Metal additive manufacturing (AM) by laser powder bed fusion (L-PBF) builds upon fundamentals established in the field of laser welding which include the influence of gas and plume dynamics on weld depth and quality. L-PBF demands a thorough investigation of the complex thermophysical phenomena that occur where the laser interacts with the metal powder bed. In particular, melt pool turbulence and evaporation are influenced by the ambient gas chemistry and pressure. This paper presents the design and validation of high pressure laser melting (HPLM) testbed; this accommodates bare metal plate samples as well as manually-coated single powder layers, and operates at up to 300 psig. The open architecture of this testbed allows for full control of all relevant laser parameters in addition to ambient gas pressure and gas flow over the build area. Representative melt tracks and rasters on bare plate and powder are examined in order to validate system performance, and preliminary analysis concludes that pressure has a significant impact on melt pool aspect ratio. The HPLM system thus enables careful study pressure effects on processing of common L-PBF materials, and can be applied in the future to materials that are challenging to process under ambient pressure, such as those with high vapor pressures. △ Less

Submitted 4 July, 2021; originally announced July 2021.

Comments: 25 pages, 16 figures, submitted to Additive Manufacturing

Substrate-Versatile Direct-Write Printing of Carbon Nanotube-Based Flexible Conductors, Circuits, and Sensors

Authors: Crystal E. Owens, Robert J. Headrick, Steven M. Williams, Amanda J. Fike, Matteo Pasquali, Gareth H. McKinley, A. John Hart

Abstract: Printed electronics rely on the deposition of conductive liquid inks, typically onto polymeric or paper substrates. Among available conductive fillers for use in electronic inks, carbon nanotubes (CNTs) have high conductivity, low density, processability at low temperatures, and intrinsic mechanical flexibility. However, the electrical conductivity of printed CNT structures has been limited by CNT… ▽ More Printed electronics rely on the deposition of conductive liquid inks, typically onto polymeric or paper substrates. Among available conductive fillers for use in electronic inks, carbon nanotubes (CNTs) have high conductivity, low density, processability at low temperatures, and intrinsic mechanical flexibility. However, the electrical conductivity of printed CNT structures has been limited by CNT quality and concentration, and by the need for nonconductive modifiers to make the ink stable and extrudable. This study introduces a polymer-free, printable aqueous CNT ink, and presents the relationships between printing resolution, ink rheology, and ink-substrate interactions. A model is constructed to predict printed feature sizes on impermeable substrates based on Wenzel wetting. Printed lines have conductivity up to 10,000 S/m. The lines are flexible, with < 5% change in DC resistance after 1,000 bending cycles, and <3% change in DC resistance with a bending radius down to 1 mm. Demonstrations focus on (i) conformality, via printing CNTs onto stickers that can be applied to curved surfaces, (ii) interactivity using a CNT-based button printed onto folded paper structure, and (iii) capacitive sensing of liquid wicking into the substrate itself. Facile integration of surface mount components on printed circuits is enabled by the intrinsic adhesion of the wet ink. △ Less

Submitted 23 May, 2021; originally announced May 2021.

Comments: Published in Advanced Functional Materials

Journal ref: Advanced Functional Materials (2021)

Spatial Mapping of Powder Layer Density for Metal Additive Manufacturing via X-ray Microscopy

Authors: Ryan W. Penny, Patrick M. Praegla, Marvin Ochsenius, Daniel Oropeza, Christoph Meier, Wolfgang A. Wall, A. John Hart

Abstract: Uniform powder spreading is a requisite for creating consistent, high-quality components via powder bed additive manufacturing (AM), wherein layer density and uniformity are complex functions of powder characteristics, spreading kinematics, and mechanical boundary conditions. High spatial variation in particle packing density, driven by the stochastic nature of the spreading process, impedes optic… ▽ More Uniform powder spreading is a requisite for creating consistent, high-quality components via powder bed additive manufacturing (AM), wherein layer density and uniformity are complex functions of powder characteristics, spreading kinematics, and mechanical boundary conditions. High spatial variation in particle packing density, driven by the stochastic nature of the spreading process, impedes optical interrogation of these layer attributes. Thus, we present transmission X-ray imaging as a method for directly mapping the effective depth of powder layers at process-relevant scale and resolution. Specifically, we study layers of nominal 50-250 micrometer thickness, created by spreading a selection of commercially obtained Ti-6Al-4V, 316 SS, and Al-10Si-Mg powders into precision-depth templates. We find that powder layer packing fraction may be predicted from a combination of the relative thickness of the layer as compared to mean particle size, and flowability assessed by macroscale powder angle of repose. Power spectral density analysis is introduced as a tool for quantification of defect severity as a function of morphology, and enables separate consideration of layer uniformity and sparsity. Finally, spreading is studied using multi-layer templates, providing insight into how particles interact with both previously deposited material and abrupt changes in boundary condition. Experimental results are additionally compared to a purpose-built discrete element method (DEM) powder spreading simulation framework, clarifying the competing role of adhesive and gravitational forces in layer uniformity and density, as well as particle motion within the powder bed during spreading. △ Less

Submitted 24 March, 2021; originally announced March 2021.

On-lattice voxelated convolutional neural networks for prediction of phase diagrams and diffusion barriers in cubic alloys

Authors: Seyedeh Mohadeseh Taheri-Mousavi, Seyed Sina Moeini-Ardakani, Ryan W. Penny, Ju Li, A. John Hart

Abstract: Cluster expansion approximates an on-lattice potential with polynomial regression. We show that using a convolutional neural network (CNN) instead leads to more accurate prediction due to the depth of the network. We construct our CNN potential directly on cubic lattice sites, representing voxels in a 3D image, and refer to our method as the voxelated CNN (VCNN). The convolutional layers automatic… ▽ More Cluster expansion approximates an on-lattice potential with polynomial regression. We show that using a convolutional neural network (CNN) instead leads to more accurate prediction due to the depth of the network. We construct our CNN potential directly on cubic lattice sites, representing voxels in a 3D image, and refer to our method as the voxelated CNN (VCNN). The convolutional layers automatically integrate interaction terms in the regressor; thus, no explicit definition of clusters is required. As a model system, we combine our VCNN potential with Monte Carlo simulations on a Ni$_{1-x}$Al$_x$ ($x$ < 30%) and predict a disordered-to-ordered phase transition with less than 1 meV/atom error. We also predict the energetic landscape of vacancy diffusion. Classification of formation energy with respect to short-range-ordering of Al alloys around a vacancy reveals that the ordering decreases the probability of Ni diffusion. As the width of our input layer does not depend on the atomic composition, VCNNs can be applied to study alloys with arbitrary numbers of elements and empty lattice sites, without additional computational costs. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Plasticity and damage mechanisms in Ti-6Al-4V printed with selective laser melting

Authors: Atieh Moridi, Ali Gökhan Demir, Leonardo Caprio, A. John Hart, Barbara Previtali, Bianca M. Colosimo

Abstract: The ability to create complex geometries with tailored material properties has brought interest in using additive manufacturing (AM) techniques in various industrial applications. However, the complex relationship between AM process parameters, microstructure, and resultant properties of metals needs to be fully understood for the widespread use of metal AM. In this study, selective laser melting… ▽ More The ability to create complex geometries with tailored material properties has brought interest in using additive manufacturing (AM) techniques in various industrial applications. However, the complex relationship between AM process parameters, microstructure, and resultant properties of metals needs to be fully understood for the widespread use of metal AM. In this study, selective laser melting is used to print Ti-6Al-4V. In-situ tensile tests with concurrent detailed microstructural analysis using electron backscatter diffraction, electron channeling contrast imaging, and digital image correlation are performed to understand the damage mechanism and its relation to the microstructure. Our results show that the as-printed part develops a hierarchical microstructures, consisting of primary, secondary, and tertiary α^' martensite. This hierarchical structure is formed as a result of cyclic heat treatment during the course of selective laser melting. Upon deformation, strain localization within primary α^' martensite results in microscopic ductile micro-void formation and coalescence, as well as macroscopic brittle fracture. In addition to localization inside primary α^', surface steps at the boundaries of these high aspect ratio grains are formed which reveal the contribution of interfacial plasticity to the overall deformation of the material. △ Less

Submitted 7 August, 2019; v1 submitted 29 May, 2019; originally announced May 2019.

Comments: 16 pages, 9 figures

Shear Melting and Recovery of Crosslinkable Cellulose Nanocrystal-Polymer Gels

Authors: Abhinav Rao, Thibaut Divoux, Gareth H. McKinley, A. John Hart

Abstract: Cellulose nanocrystals (CNC) are naturally-derived nanostructures of growing importance for the production of composites having attractive mechanical properties, and offer improved sustainability over purely petroleum-based alternatives. Fabrication of CNC composites typically involves extrusion of CNC suspensions and gels in a variety of solvents, in the presence of additives such as polymers and… ▽ More Cellulose nanocrystals (CNC) are naturally-derived nanostructures of growing importance for the production of composites having attractive mechanical properties, and offer improved sustainability over purely petroleum-based alternatives. Fabrication of CNC composites typically involves extrusion of CNC suspensions and gels in a variety of solvents, in the presence of additives such as polymers and curing agents. However, most studies so far have focused on aqueous CNC gels, yet the behavior of CNC-polymer gels in organic solvents is important to their wider processability. Here, we study the rheological behavior of composite polymer-CNC gels in dimethylformamide, which include additives for both UV and thermal crosslinking. Using rheometry coupled with in-situ infrared spectroscopy, we show that under external shear, CNC-polymer gels display progressive and irreversible failure of the hydrogen bond network that is responsible for their pronounced elastic properties. In the absence of cross-linking additives, the polymer-CNC gels show negligible recovery upon cessation of flow, while the presence of additives allows the gels to recover via van der Waals interactions. By exploring a broad range of shear history and CNC concentrations, we construct master curves for the temporal evolution of the viscoelastic properties of the polymer-CNC gels, illustrating universality of the observed dynamics with respect to gel composition and flow conditions. We therefore find that polymer-CNC composite gels display a number of the distinctive features of colloidal glasses and, strikingly, that their response to the flow conditions encountered during processing can be tuned by chemical additives. These findings have implications for processing of dense CNC-polymer composites in solvent casting, 3D printing, and other manufacturing techniques. △ Less

Submitted 14 January, 2019; originally announced January 2019.

Comments: 12 pages, 10 figures, Supplemental: 6 pages, 8 figures

Thermophysical Phenomena in Metal Additive Manufacturing by Selective Laser Melting: Fundamentals, Modeling, Simulation and Experimentation

Authors: Christoph Meier, Ryan W. Penny, Yu Zou, Jonathan S. Gibbs, A. John Hart

Abstract: Among the many additive manufacturing (AM) processes for metallic materials, selective laser melting (SLM) is arguably the most versatile in terms of its potential to realize complex geometries along with tailored microstructure. However, the complexity of the SLM process, and the need for predictive relation of powder and process parameters to the part properties, demands further development of c… ▽ More Among the many additive manufacturing (AM) processes for metallic materials, selective laser melting (SLM) is arguably the most versatile in terms of its potential to realize complex geometries along with tailored microstructure. However, the complexity of the SLM process, and the need for predictive relation of powder and process parameters to the part properties, demands further development of computational and experimental methods. This review addresses the fundamental physical phenomena of SLM, with a special emphasis on the associated thermal behavior. Simulation and experimental methods are discussed according to three primary categories. First, macroscopic approaches aim to answer questions at the component level and consider for example the determination of residual stresses or dimensional distortion effects prevalent in SLM. Second, mesoscopic approaches focus on the detection of defects such as excessive surface roughness, residual porosity or inclusions that occur at the mesoscopic length scale of individual powder particles. Third, microscopic approaches investigate the metallurgical microstructure evolution resulting from the high temperature gradients and extreme heating and cooling rates induced by the SLM process. Consideration of physical phenomena on all of these three length scales is mandatory to establish the understanding needed to realize high part quality in many applications, and to fully exploit the potential of SLM and related metal AM processes. △ Less

Submitted 4 September, 2017; originally announced September 2017.

Fast Desktop-Scale Extrusion Additive Manufacturing

Authors: Jamison Go, A. John Hart

Abstract: Significant improvements to the production rate of additive manufacturing (AM) technologies are essential to their cost-effectiveness and competitiveness with traditional processing routes. Moreover, much faster AM processes, in combination with the geometric versatility of AM, will enable entirely new workflows for product design and customization. We present the design and validation of a deskto… ▽ More Significant improvements to the production rate of additive manufacturing (AM) technologies are essential to their cost-effectiveness and competitiveness with traditional processing routes. Moreover, much faster AM processes, in combination with the geometric versatility of AM, will enable entirely new workflows for product design and customization. We present the design and validation of a desktop-scale extrusion AM system that achieves far greater build rate than benchmarked commercial systems. This system, which we call FastFFF, is motivated by our recent analysis of the rate-limiting mechanisms to conventional fused filament fabrication (FFF) technology. The FastFFF system mutually overcomes these limits, using a nut-feed extruder, laser-heated polymer liquefier, and servo-driven parallel gantry system to achieve high extrusion force, rapid filament heating, and fast gantry motion, respectively. The extrusion and heating mechanisms are contained in a compact printhead that receives a threaded filament and augments conduction heat transfer with a fiber-coupled diode laser. The prototype system achieves a volumetric build rate of 127 cm3/hr, which is 7-fold greater than commercial desktop FFF systems, at comparable resolution; the maximum extrusion rate of the printhead is ~14-fold greater (282 cm3/hr). The performance limits of the printhead and motion systems are characterized, and the tradeoffs between build rate and resolution are assessed and discussed. The combination of high-speed motion and high deposition rate achieved by the FastFFF technology also poses challenges and opportunities for toolpath optimization and real-time deposition control. High-speed desktop printing raises the possibility of new use cases and business models for AM, where handheld parts are built in minutes rather than hours. △ Less

Submitted 2 July, 2017; originally announced September 2017.

Twist Coupled Kirigami Cellular Metamaterials and Mechanisms

Authors: Nigamaa Nayakanti, Sameh H. Tawfick, A. John Hart

Abstract: Manipulation of thin sheets by folding and cutting offers opportunity to engineer structures with novel mechanical properties, and to prescribe complex force-displacement relationships via material elasticity in combination with the trajectory imposed by the fold topology. We study the mechanics of cellular Kirigami that rotates upon compression, which we call Flexigami; the addition of diagonal c… ▽ More Manipulation of thin sheets by folding and cutting offers opportunity to engineer structures with novel mechanical properties, and to prescribe complex force-displacement relationships via material elasticity in combination with the trajectory imposed by the fold topology. We study the mechanics of cellular Kirigami that rotates upon compression, which we call Flexigami; the addition of diagonal cuts to an equivalent closed cell permits its reversible collapse without incurring significant tensile strains in its panels. Using finite-element modeling and experiment we show how the mechanics of flexigami is governed by the coupled rigidity of the panels and hinges and we design flexigami to achieve reversible force response ranging from smooth mono-stability to sharp bi-stability. We then demonstrate the use of flexigami to construct laminates with multi-stable behavior, a rotary-linear boom actuator, and self-deploying cells with activated hinges. Advanced digital fabrication methods can enable the practical use of flexigami and other metamaterials that share its underlying principles, for applications such as morphing structures, soft robotics and medical devices. △ Less

Submitted 12 July, 2017; originally announced July 2017.

Comments: 32 pages long (includes supplementary information), 5 figures in the main text, 4 figures in SI

A Framework for Teaching the Fundamentals of Additive Manufacturing and Enabling Rapid Innovation

Authors: Jamison Go, A. John Hart

Abstract: The importance of additive manufacturing (AM) to the future of product design and manufacturing systems demands educational programs tailored to embrace its fundamental principles and its innovative potential. Moreover, the breadth and depth of AM spans several traditional disciplines, presenting a challenge to instructors yet giving the opportunity to integrate knowledge via creative and challeng… ▽ More The importance of additive manufacturing (AM) to the future of product design and manufacturing systems demands educational programs tailored to embrace its fundamental principles and its innovative potential. Moreover, the breadth and depth of AM spans several traditional disciplines, presenting a challenge to instructors yet giving the opportunity to integrate knowledge via creative and challenging projects. This paper presents our approach to teaching AM at the graduate and advanced undergraduate level, in the form of a 15-week course developed and taught at the Massachusetts Institute of Technology. The lectures begin with in-depth technical analysis of the major AM processes. In lab sessions, students operate and characterize desktop AM machines, and work in teams to design and fabricate a bridge having maximum strength per unit weight while conforming to geometric constraints. To conclude the semester, teams created prototype machines for printing molten glass, soft serve ice cream, biodegradable material, and carbon fiber composites, as well as for large area parallel extrusion and for in situ optical scanning during printing. We conclude that AM education, while arguably rooted in mechanical engineering, is truly multidisciplinary, and that education programs must embrace this context. △ Less

Submitted 30 October, 2015; originally announced October 2015.