Showing 1–50 of 86 results for author: Harris, J

Epicast 2.0: A large-scale, demographically detailed, agent-based model for simulating respiratory pathogen spread in the United States

Authors: Prescott C. Alexander, Thomas J. Harris, Joy Kitson, Joseph V. Tuccillo, Sara Y. Del Valle, Timothy C. Germann

Abstract: The recent history of respiratory pathogen epidemics, including those caused by influenza and SARS-CoV-2, has highlighted the urgent need for advanced modeling approaches that can accurately capture heterogeneous disease dynamics and outcomes at the national scale, thereby enhancing the effectiveness of resource allocation and decision-making. In this paper, we describe Epicast 2.0, an agent-based… ▽ More The recent history of respiratory pathogen epidemics, including those caused by influenza and SARS-CoV-2, has highlighted the urgent need for advanced modeling approaches that can accurately capture heterogeneous disease dynamics and outcomes at the national scale, thereby enhancing the effectiveness of resource allocation and decision-making. In this paper, we describe Epicast 2.0, an agent-based model that utilizes a highly detailed, synthetic population and high-performance computing techniques to simulate respiratory pathogen transmission across the entire United States. This model replicates the contact patterns of over 320 million agents as they engage in daily activities at school, work, and within their communities. Epicast 2.0 supports vaccination and an array of non-pharmaceutical interventions that can be promoted or relaxed via highly granular, user specified policies. We illustrate the model's capabilities using a wide range of outbreak scenarios, highlighting the model's varied dynamics as well as its extensive support for policy exploration. This model provides a robust platform for conducting what if scenario analysis and providing insights into potential strategies for mitigating the impacts of infectious diseases. △ Less

Submitted 4 April, 2025; originally announced April 2025.

Comments: 26 pages, 10 figures

Complex Berry phase and steady-state geometric amplification in non-Hermitian systems

Authors: J. R. Lane, C. Guria, J. Höller, T. D. Montalvo, Y. S. S. Patil, J. G. E. Harris

Abstract: Understanding and controlling the dynamics of coupled oscillators is important for a wide range of scientific and technological endeavors. Two concepts that have generated new insights into this topic are Berry phase (oscillators' memory of how they have been tuned) and non-Hermiticity (damping and its often counter-intuitive consequences). Here we describe measurements of the interplay between th… ▽ More Understanding and controlling the dynamics of coupled oscillators is important for a wide range of scientific and technological endeavors. Two concepts that have generated new insights into this topic are Berry phase (oscillators' memory of how they have been tuned) and non-Hermiticity (damping and its often counter-intuitive consequences). Here we describe measurements of the interplay between these two phenomena that highlight the qualitative changes they induce in each other. In particular, non-Hermiticity changes the Berry phase from a real to a complex number, opening new avenues for controlling the flow of energy in oscillators. We illustrate this by demonstrating a broadly applicable means for converting a system's intrinsic damping into a novel form of amplification. △ Less

Submitted 29 March, 2025; originally announced March 2025.

Comments: † These authors contributed equally to this work. *Corresponding author. 15 pages of main texts, 5 main text figures. 45 pages of supplementary information, 16 supplementary figures

High-Precision Excited-State Nuclear Recoil Spectroscopy with Superconducting Sensors

Authors: C. Bray, S. Fretwell, L. A. Zepeda-Ruiz, I. Kim, A. Samanta, K. Wang, C. Stone-Whitehead, W. K. Warburton, F. Ponce, K. G. Leach, R. Abells, P. Amaro, A. Andoche, R. Cantor, D. Diercks, M. Guerra, A. Hall, C. Harris, J. Harris, L. Hayen, P. A. Hervieux, G. B. Kim, A. Lennarz, V. Lordi, J. Machado , et al. (8 additional authors not shown)

Abstract: Superconducting sensors doped with rare isotopes have recently demonstrated powerful sensing performance for sub-keV radiation from nuclear decay. Here, we report the first high-resolution recoil spectroscopy of a single, selected nuclear state using superconducting tunnel junction (STJ) sensors. The STJ sensors were used to measure the eV-scale nuclear recoils produced in $^7$Be electron capture… ▽ More Superconducting sensors doped with rare isotopes have recently demonstrated powerful sensing performance for sub-keV radiation from nuclear decay. Here, we report the first high-resolution recoil spectroscopy of a single, selected nuclear state using superconducting tunnel junction (STJ) sensors. The STJ sensors were used to measure the eV-scale nuclear recoils produced in $^7$Be electron capture decay in coincidence with a 478 keV $γ$-ray emitted in decays to the lowest-lying excited nuclear state in $^7$Li. Details of the Doppler broadened recoil spectrum depend on the slow-down dynamics of the recoil ion. The measured spectral broadening is compared to empirical stopping power models as well as modern molecular dynamics simulations at low energy. The results have implications in several areas from nuclear structure and stopping powers at eV-scale energies to direct searches for dark matter, neutrino mass measurements, and other physics beyond the standard model. △ Less

Submitted 10 December, 2024; v1 submitted 11 November, 2024; originally announced November 2024.

Modelling floral and arthropod electrostatics using a two-domain AAA-least squares algorithm

Authors: Samuel J. Harris, Ryan A. Palmer, N. R. McDonald

Abstract: Relationships between plants and insects vitally underpin the health of global ecosystems and food production. Through co-evolution, insects have acquired a variety of senses in response to the emergence of floral cues such as scent, colour and shape. Therefore, the recent discovery of electroreception among terrestrial arthropods motivates the investigation of floral electrics as part of their wi… ▽ More Relationships between plants and insects vitally underpin the health of global ecosystems and food production. Through co-evolution, insects have acquired a variety of senses in response to the emergence of floral cues such as scent, colour and shape. Therefore, the recent discovery of electroreception among terrestrial arthropods motivates the investigation of floral electrics as part of their wider sensory ecology. We examine how a flower's morphology and material properties produce and propagate detectable, ecologically relevant electrical signals in several biologically inspired scenarios. As the electrical field both interior and exterior to the flower must be solved for, we develop an extension of the two-dimensional AAA-least squares algorithm for solving such two-domain electrostatics problems. It is found that the electrical signals produced by the plant can reveal information to the insect about the flower shape, available pollen and the presence of other nearby arthropods. These results show good qualitative agreement with an equivalent three-dimensional scenario, computed using finite element methods. The extension of the AAA-least squares algorithm to two-domain problems provides a fast and accurate method for modelling electrostatic problems, with possible further application in fluid dynamics and magnetostatics. Biologically, our results highlight the significant role floral electrics may play in plant-pollinator and predator-prey relationships, unveiling previously unstudied facets of these key relationships. △ Less

Submitted 4 April, 2025; v1 submitted 4 November, 2024; originally announced November 2024.

Comments: Submitted to the SIAM Journal on Applied Mathematics

Quantum optomechanical control of long-lived bulk acoustic phonons

Authors: Hilel Hagai Diamandi, Yizhi Luo, David Mason, Tevfik Bulent Kanmaz, Sayan Ghosh, Margaret Pavlovich, Taekwan Yoon, Ryan Behunin, Shruti Puri, Jack G. E. Harris, Peter T. Rakich

Abstract: High-fidelity quantum optomechanical control of a mechanical oscillator requires the ability to perform efficient, low-noise operations on long-lived phononic excitations. Microfabricated high-overtone bulk acoustic wave resonators ($\mathrmμ$HBARs) have been shown to support high-frequency (> 10 GHz) mechanical modes with exceptionally long coherence times (> 1.5 ms), making them a compelling res… ▽ More High-fidelity quantum optomechanical control of a mechanical oscillator requires the ability to perform efficient, low-noise operations on long-lived phononic excitations. Microfabricated high-overtone bulk acoustic wave resonators ($\mathrmμ$HBARs) have been shown to support high-frequency (> 10 GHz) mechanical modes with exceptionally long coherence times (> 1.5 ms), making them a compelling resource for quantum optomechanical experiments. In this paper, we demonstrate a new optomechanical system that permits quantum optomechanical control of individual high-coherence phonon modes supported by such $\mathrmμ$HBARs for the first time. We use this system to perform laser cooling of such ultra-massive (7.5 $\mathrmμ$g) high frequency (12.6 GHz) phonon modes from an occupation of ${\sim}$22 to fewer than 0.4 phonons, corresponding to laser-based ground-state cooling of the most massive mechanical object to date. Through these laser cooling experiments, no absorption-induced heating is observed, demonstrating the resilience of the $\mathrmμ$HBAR against parasitic heating. The unique features of such $\mathrmμ$HBARs make them promising as the basis for a new class of quantum optomechanical systems that offer enhanced robustness to decoherence, necessary for efficient, low-noise photon-phonon conversion. △ Less

Submitted 23 October, 2024; originally announced October 2024.

Signal processing and spectral modeling for the BeEST experiment

Authors: Inwook Kim, Connor Bray, Andrew Marino, Caitlyn Stone-Whitehead, Amii Lamm, Ryan Abells, Pedro Amaro, Adrien Andoche, Robin Cantor, David Diercks, Spencer Fretwell, Abigail Gillespie, Mauro Guerra, Ad Hall, Cameron N. Harris, Jackson T. Harris, Calvin Hinkle, Leendert M. Hayen, Paul-Antoine Hervieux, Geon-Bo Kim, Kyle G. Leach, Annika Lennarz, Vincenzo Lordi, Jorge Machado, David McKeen , et al. (13 additional authors not shown)

Abstract: The Beryllium Electron capture in Superconducting Tunnel junctions (BeEST) experiment searches for evidence of heavy neutrino mass eigenstates in the nuclear electron capture decay of $^7$Be by precisely measuring the recoil energy of the $^7$Li daughter. In Phase-III, the BeEST experiment has been scaled from a single superconducting tunnel junction (STJ) sensor to a 36-pixel array to increase se… ▽ More The Beryllium Electron capture in Superconducting Tunnel junctions (BeEST) experiment searches for evidence of heavy neutrino mass eigenstates in the nuclear electron capture decay of $^7$Be by precisely measuring the recoil energy of the $^7$Li daughter. In Phase-III, the BeEST experiment has been scaled from a single superconducting tunnel junction (STJ) sensor to a 36-pixel array to increase sensitivity and mitigate gamma-induced backgrounds. Phase-III also uses a new continuous data acquisition system that greatly increases the flexibility for signal processing and data cleaning. We have developed procedures for signal processing and spectral fitting that are sufficiently robust to be automated for large data sets. This article presents the optimized procedures before unblinding the majority of the Phase-III data set to search for physics beyond the standard model. △ Less

Submitted 17 January, 2025; v1 submitted 27 September, 2024; originally announced September 2024.

Modelling wildfire spread and spotfire merger using conformal mapping and AAA-least squares methods

Authors: Samuel J. Harris, N. R. McDonald

Abstract: A two-dimensional model of wildfire spread and merger is presented. Three features affect the fire propagation: (i) a constant basic rate of spread term accounting for radiative and convective heat transfer, (ii) the unidirectional, constant ambient wind, and (iii) a fire-induced pyrogenic wind. Two numerical methods are proposed to solve for the harmonic pyrogenic potential. The first utilizes th… ▽ More A two-dimensional model of wildfire spread and merger is presented. Three features affect the fire propagation: (i) a constant basic rate of spread term accounting for radiative and convective heat transfer, (ii) the unidirectional, constant ambient wind, and (iii) a fire-induced pyrogenic wind. Two numerical methods are proposed to solve for the harmonic pyrogenic potential. The first utilizes the conformal invariance of the Laplace equation, reducing the wildfire system to a single Polubarinova-Galin type equation. The second method uses a AAA-least squares method to find a rational approximation of the potential. Various wildfire scenarios are presented and the effects of the pyrogenic wind and the radiative/convective basic rate of spread terms investigated. Firebreaks such as roads and lakes are also included and solutions are found to match well with existing numerical and experimental results. The methods proposed in this work are suitably fast and accurate to be considered for operational use. △ Less

Submitted 12 August, 2024; originally announced August 2024.

Comments: 22 pages, 12 figures. Submitted to Elsevier Environmental Modelling and Software

MSC Class: 65E10

The Data Acquisition System for Phase-III of the BeEST Experiment

Authors: C. Bray, S. Fretwell, I. Kim, W. K. Warburton, F. Ponce, K. G. Leach, S. Friedrich, R. Abells, P. Amaro, A. Andoche, R. Cantor, D. Diercks, M. Guerra, A. Hall, C. Harris, J. Harris, L. Hayen, P. A. Hervieux, G. B. Kim, A. Lennarz, V. Lordi, J. Machado, P. Machule, A. Marino, D. McKeen , et al. (5 additional authors not shown)

Abstract: The BeEST experiment is a precision laboratory search for physics beyond the standard model that measures the electron capture decay of $^7$Be implanted into superconducting tunnel junction (STJ) detectors. For Phase-III of the experiment, we constructed a continuously sampling data acquisition system to extract pulse shape and timing information from 16 STJ pixels offline. Four additional pixels… ▽ More The BeEST experiment is a precision laboratory search for physics beyond the standard model that measures the electron capture decay of $^7$Be implanted into superconducting tunnel junction (STJ) detectors. For Phase-III of the experiment, we constructed a continuously sampling data acquisition system to extract pulse shape and timing information from 16 STJ pixels offline. Four additional pixels are read out with a fast list-mode digitizer, and one with a nuclear MCA already used in the earlier limit-setting phases of the experiment. We present the performance of the data acquisition system and discuss the relative advantages of the different digitizers. △ Less

Submitted 20 November, 2023; originally announced November 2023.

Comments: 8 pages, 4 figures, proceedings for The 20th International Conference on Low Temperature Detectors

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Authors: Nemanja Jovanovic, Pradip Gatkine, Narsireddy Anugu, Rodrigo Amezcua-Correa, Ritoban Basu Thakur, Charles Beichman, Chad Bender, Jean-Philippe Berger, Azzurra Bigioli, Joss Bland-Hawthorn, Guillaume Bourdarot, Charles M. Bradford, Ronald Broeke, Julia Bryant, Kevin Bundy, Ross Cheriton, Nick Cvetojevic, Momen Diab, Scott A. Diddams, Aline N. Dinkelaker, Jeroen Duis, Stephen Eikenberry, Simon Ellis, Akira Endo, Donald F. Figer , et al. (55 additional authors not shown)

Abstract: Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio… ▽ More Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Comments: 191 pages, 47 figures. This is the version of the article before peer review or editing, as submitted by an author to J. Phys. Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://iopscience.iop.org/article/10.1088/2515-7647/ace869/meta

Journal ref: J. Phys. Photonics 5 042501 (2023)

Penguin huddling: a continuum model

Authors: Samuel J. Harris, N. R. McDonald

Abstract: Penguins huddling in a cold wind are represented by a two-dimensional, continuum model. The huddle boundary evolves due to heat loss to the huddle exterior and through the reorganisation of penguins as they seek to regulate their heat production within the huddle. These two heat transfer mechanisms, along with area, or penguin number, conservation, gives a free boundary problem whose dynamics depe… ▽ More Penguins huddling in a cold wind are represented by a two-dimensional, continuum model. The huddle boundary evolves due to heat loss to the huddle exterior and through the reorganisation of penguins as they seek to regulate their heat production within the huddle. These two heat transfer mechanisms, along with area, or penguin number, conservation, gives a free boundary problem whose dynamics depend on both the dynamics interior and exterior to the huddle. Assuming the huddle shape evolves slowly compared to the advective timescale of the exterior wind, the interior temperature is governed by a Poisson equation and the exterior temperature by the steady advection-diffusion equation. The exterior, advective wind velocity is the gradient of a harmonic, scalar field. The conformal invariance of the exterior governing equations is used to convert the system to a Polubarinova-Galin type equation, with forcing depending on both the interior and exterior temperature gradients at the huddle boundary. The interior Poisson equation is not conformally invariant, so the interior temperature gradient is found numerically using a combined adaptive Antoulas-Anderson and least squares algorithm. The results show that, irrespective of the starting shape, penguin huddles evolve into an egg-like steady shape. This shape is dependent on the wind strength, parameterised by the Péclet number Pe, and a parameter \b{eta} which effectively measures the strength of the interior self-generation of heat by the penguins. The numerical method developed is applicable to a further five free boundary problems. △ Less

Submitted 12 May, 2023; originally announced May 2023.

Comments: 16 pages, 8 figures, submitted to Acta Applicandae Mathematicae

Journal ref: Acta Appl Math 185, 7 (2023)

Resolving the topology of encircling multiple exceptional points

Authors: Chitres Guria, Qi Zhong, Sahin K. Ozdemir, Yogesh S. S. Patil, Ramy El-Ganainy, Jack G. E. Harris

Abstract: Non-Hermiticity has emerged as a new paradigm for controlling coupled-mode systems in ways that cannot be achieved with conventional techniques. One aspect of this control that has received considerable attention recently is the encircling of exceptional points (EPs). To date, most work has focused on systems consisting of two modes that are tuned by two control parameters and have isolated EPs. W… ▽ More Non-Hermiticity has emerged as a new paradigm for controlling coupled-mode systems in ways that cannot be achieved with conventional techniques. One aspect of this control that has received considerable attention recently is the encircling of exceptional points (EPs). To date, most work has focused on systems consisting of two modes that are tuned by two control parameters and have isolated EPs. While these systems exhibit exotic features related to EP encircling, it has been shown that richer behavior occurs in systems with more than two modes. Such systems can be tuned by more than two control parameters, and contain EPs that form a knot-like structure. Control loops that encircle this structure cause the system's eigenvalues to trace out non-commutative braids. Here we consider a hybrid scenario: a three-mode system with just two control parameters. We describe the relationship between control loops and their topology in the full and two-dimensional parameter space. We demonstrate this relationship experimentally using a three-mode mechanical system in which the control parameters are provided by optomechanical interaction with a high-finesse optical cavity. △ Less

Submitted 16 February, 2024; v1 submitted 6 April, 2023; originally announced April 2023.

Comments: 23 pages, 6 figures

A tabletop x-ray tomography instrument for nanometer-scale imaging: demonstration of the 1,000-element transition-edge sensor subarray

Authors: Paul Szypryt, Nathan Nakamura, Daniel T. Becker, Douglas A. Bennett, Amber L. Dagel, W. Bertrand Doriese, Joseph W. Fowler, Johnathon D. Gard, J. Zachariah Harris, Gene C. Hilton, Jozsef Imrek, Edward S. Jimenez, Kurt W. Larson, Zachary H. Levine, John A. B. Mates, D. McArthur, Luis Miaja-Avila, Kelsey M. Morgan, Galen C. O'Neil, Nathan J. Ortiz, Christine G. Pappas, Daniel R. Schmidt, Kyle R. Thompson, Joel N. Ullom, Leila Vale , et al. (6 additional authors not shown)

Abstract: We report on the 1,000-element transition-edge sensor (TES) x-ray spectrometer implementation of the TOMographic Circuit Analysis Tool (TOMCAT). TOMCAT combines a high spatial resolution scanning electron microscope (SEM) with a highly efficient and pixelated TES spectrometer to reconstruct three-dimensional maps of nanoscale integrated circuits (ICs). A 240-pixel prototype spectrometer was recent… ▽ More We report on the 1,000-element transition-edge sensor (TES) x-ray spectrometer implementation of the TOMographic Circuit Analysis Tool (TOMCAT). TOMCAT combines a high spatial resolution scanning electron microscope (SEM) with a highly efficient and pixelated TES spectrometer to reconstruct three-dimensional maps of nanoscale integrated circuits (ICs). A 240-pixel prototype spectrometer was recently used to reconstruct ICs at the 130 nm technology node, but to increase imaging speed to more practical levels, the detector efficiency needs to be improved. For this reason, we are building a spectrometer that will eventually contain 3,000 TES microcalorimeters read out with microwave superconducting quantum interference device (SQUID) multiplexing, and we currently have commissioned a 1,000 TES subarray. This still represents a significant improvement from the 240-pixel system and allows us to begin characterizing the full spectrometer performance. Of the 992 maximimum available readout channels, we have yielded 818 devices, representing the largest number of TES x-ray microcalorimeters simultaneously read out to date. These microcalorimeters have been optimized for pulse speed rather than purely energy resolution, and we measure a FWHM energy resolution of 14 eV at the 8.0 keV Cu K$α$ line. △ Less

Submitted 22 December, 2022; originally announced December 2022.

Comments: 5 pages, 4 figures, submitted to IEEE Transactions on Applied Superconductivity

Journal ref: IEEE Transactions on Applied Superconductivity, vol. 33, no. 5, pp. 1-5, Aug. 2023, Art no. 2100705

Nanoscale Three-Dimensional Imaging of Integrated Circuits using a Scanning Electron Microscope and Transition-Edge Sensor Spectrometer

Authors: Nathan Nakamura, Paul Szypryt, Amber L. Dagel, Bradley K. Alpert, Douglas A. Bennett, W. Bertrand Doriese, Malcolm Durkin, Joseph W. Fowler, Dylan T. Fox, Johnathon D. Gard, Ryan N. Goodner, J. Zachariah Harris, Gene C. Hilton, Edward S. Jimenez, Burke L. Kernen, Kurt W. Larson, Zachary H. Levine, Daniel McArthur, Kelsey M. Morgan, Galen C. O'Neil, Nathan J. Ortiz, Christine G. Pappas, Carl D. Reintsema, Daniel R. Schmidt, Peter A. Schultz , et al. (8 additional authors not shown)

Abstract: X-ray nanotomography is a powerful tool for the characterization of nanoscale materials and structures, but is difficult to implement due to competing requirements on X-ray flux and spot size. Due to this constraint, state-of-the-art nanotomography is predominantly performed at large synchrotron facilities. We present a laboratory-scale nanotomography instrument that achieves nanoscale spatial res… ▽ More X-ray nanotomography is a powerful tool for the characterization of nanoscale materials and structures, but is difficult to implement due to competing requirements on X-ray flux and spot size. Due to this constraint, state-of-the-art nanotomography is predominantly performed at large synchrotron facilities. We present a laboratory-scale nanotomography instrument that achieves nanoscale spatial resolution while changing the limitations of conventional tomography tools. The instrument combines the electron beam of a scanning electron microscope (SEM) with the precise, broadband X-ray detection of a superconducting transition-edge sensor (TES) microcalorimeter. The electron beam generates a highly focused X-ray spot in a metal target held micrometers away from the sample of interest, while the TES spectrometer isolates target photons with high signal-to-noise. This combination of a focused X-ray spot, energy-resolved X-ray detection, and unique system geometry enable nanoscale, element-specific X-ray imaging in a compact footprint. The proof-of-concept for this approach to X-ray nanotomography is demonstrated by imaging 160 nm features in three dimensions in 6 layers of a Cu-SiO2 integrated circuit, and a path towards finer resolution and enhanced imaging capabilities is discussed. △ Less

Submitted 4 March, 2024; v1 submitted 20 December, 2022; originally announced December 2022.

Flash-X, a multiphysics simulation software instrument

Authors: Anshu Dubey, Klaus Weide, Jared O'Neal, Akash Dhruv, Sean Couch, J. Austin Harris, Tom Klosterman, Rajeev Jain, Johann Rudi, Bronson Messer, Michael Pajkos, Jared Carlson, Ran Chu, Mohamed Wahib, Saurabh Chawdhary, Paul M. Ricker, Dongwook Lee, Katie Antypas, Katherine M. Riley, Christopher Daley, Murali Ganapathy, Francis X. Timmes, Dean M. Townsley, Marcos Vanella, John Bachan , et al. (6 additional authors not shown)

Abstract: Flash-X is a highly composable multiphysics software system that can be used to simulate physical phenomena in several scientific domains. It derives some of its solvers from FLASH, which was first released in 2000. Flash-X has a new framework that relies on abstractions and asynchronous communications for performance portability across a range of increasingly heterogeneous hardware platforms. Fla… ▽ More Flash-X is a highly composable multiphysics software system that can be used to simulate physical phenomena in several scientific domains. It derives some of its solvers from FLASH, which was first released in 2000. Flash-X has a new framework that relies on abstractions and asynchronous communications for performance portability across a range of increasingly heterogeneous hardware platforms. Flash-X is meant primarily for solving Eulerian formulations of applications with compressible and/or incompressible reactive flows. It also has a built-in, versatile Lagrangian framework that can be used in many different ways, including implementing tracers, particle-in-cell simulations, and immersed boundary methods. △ Less

Submitted 24 August, 2022; originally announced August 2022.

Comments: 16 pages, 5 Figures, published open access in SoftwareX

Journal ref: SoftwareX, Volume 19, 2022, 101168,ISSN 2352-7110

Measuring the knot of non-Hermitian degeneracies and non-commuting braids

Authors: Yogesh S. S. Patil, Judith Höller, Parker A. Henry, Chitres Guria, Yiming Zhang, Luyao Jiang, Nenad Kralj, Nicholas Read, Jack G. E. Harris

Abstract: Any system of coupled oscillators may be characterized by its spectrum of resonance frequencies (or eigenfrequencies), which can be tuned by varying the system's parameters. The relationship between control parameters and the eigenfrequency spectrum is central to a range of applications. However, fundamental aspects of this relationship remain poorly understood. For example, if the controls are va… ▽ More Any system of coupled oscillators may be characterized by its spectrum of resonance frequencies (or eigenfrequencies), which can be tuned by varying the system's parameters. The relationship between control parameters and the eigenfrequency spectrum is central to a range of applications. However, fundamental aspects of this relationship remain poorly understood. For example, if the controls are varied along a path that returns to its starting point (i.e., around a "loop"), the system's spectrum must return to itself. In systems that are Hermitian (i.e., lossless and reciprocal) this process is trivial, and each resonance frequency returns to its original value. However, in non-Hermitian systems, where the eigenfrequencies are complex, the spectrum may return to itself in a topologically non-trivial manner, a phenomenon known as spectral flow. The spectral flow is determined by how the control loop encircles degeneracies, and this relationship is well understood for $N=2$ (where $N$ is the number of oscillators in the system). Here we extend this description to arbitrary $N$. We show that control loops generically produce braids of eigenfrequencies, and for $N>2$ these braids form a non-Abelian group which reflects the non-trivial geometry of the space of degeneracies. We demonstrate these features experimentally for $N=3$ using a cavity optomechanical system. △ Less

Submitted 15 July, 2022; v1 submitted 30 November, 2021; originally announced December 2021.

Comments: Supplementary Videos S1-S5 are included as ancillary files, or see http://www.youtube.com/watch?v=2HsIo1OgZFA&list=PL3IrfT-_t1GQvk8LYYyXvdFkp8ymv1Slc ; corrected numbering of references in SI; reorganized SI

Journal ref: Nature 607, 271-275 (2022)

Superfluid Helium Drops Levitated in High Vacuum

Authors: C. D. Brown, Y. Wang, M. Namazi, G. I. Harris, M. T. Uysal, J. G. E. Harris

Abstract: We demonstrate the trapping of millimeter-scale superfluid Helium drops in high vacuum. The drops are sufficiently isolated that they remain trapped indefinitely, cool by evaporation to 330 mK, and exhibit mechanical damping that is limited by internal processes. The drops are also shown to host optical whispering gallery modes. The approach described here combines the advantages of multiple techn… ▽ More We demonstrate the trapping of millimeter-scale superfluid Helium drops in high vacuum. The drops are sufficiently isolated that they remain trapped indefinitely, cool by evaporation to 330 mK, and exhibit mechanical damping that is limited by internal processes. The drops are also shown to host optical whispering gallery modes. The approach described here combines the advantages of multiple techniques, and should offer access to new experimental regimes of cold chemistry, superfluid physics, and optomechanics. △ Less

Submitted 31 January, 2023; v1 submitted 12 September, 2021; originally announced September 2021.

Nonclassical photon statistics in two-tone continuously driven optomechanics

Authors: K. Borkje, F. Massel, J. G. E. Harris

Abstract: In cavity optomechanics, single photon detection of Raman scattered photons can be a useful tool for observing nonclassical features of both radiation and motion. While this tool has been employed in experiments with pulsed laser driving of a cavity mode, it has not been readily accessible to experiments with continuous and constant laser driving. To address this, we present a study of a standard… ▽ More In cavity optomechanics, single photon detection of Raman scattered photons can be a useful tool for observing nonclassical features of both radiation and motion. While this tool has been employed in experiments with pulsed laser driving of a cavity mode, it has not been readily accessible to experiments with continuous and constant laser driving. To address this, we present a study of a standard optomechanical system where the cavity mode is continuously driven at two different frequencies, and where sideband photons are detected by single photon detectors after frequency filtering the output from the cavity mode around its resonance frequency. We first derive the normalized second order coherence associated with the detected photons, and show that it contains signatures of the quantum nature of the mechanical mode which would be absent with only single-tone driving. To identify model-independent nonclassical features, we derive two inequalities for the sideband photon statistics that should be valid in any classical model of the system. We show that these inequalities are violated in the proposed setup. This is provided that the average phonon occupation number of the mechanical mode is sufficiently small, which in principle can be achieved through sideband cooling intrinsic to the setup. Violation of the first inequality means that there is no well-defined probability distribution of the Glauber-Sudarshan type for the cavity mode. In contrast, a violation of the second inequality means that there is no joint probability distribution for the cavity mode at two times separated by a finite interval, which originates from the noncommutativity of the motional quadratures of the mechanical mode. The proposed setup thus employs a mechanical oscillator in order to generate a steady-state source of nonclassical radiation. △ Less

Submitted 8 December, 2021; v1 submitted 24 August, 2021; originally announced August 2021.

Comments: 13 pages, 10 figures

Journal ref: Phys. Rev. A 104, 063507 (2021)

On-sky results for the novel integrated micro-lens ring tip-tilt sensor

Authors: Philipp Hottinger, Robert J. Harris, Jonathan Crass, Philipp-Immanuel Dietrich, Matthias Blaicher, Andrew Bechter, Brian Sands, Tim J. Morris, Alastair G. Basden, Nazim Ali Bharmal, Jochen Heidt, Theodoros Anagnos, Philip L. Neureuther, Martin Glück, Jennifer Power, Jörg-Uwe Pott, Christian Koos, Oliver Sawodny, Andreas Quirrenbach

Abstract: We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with… ▽ More We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with the iLocater acquisition camera at the Large Binocular Telescope in November 2019. The limit on the maximum achieved root mean square reconstruction accuracy was found to be 0.19 $λ$/D in both tip and tilt, of which approximately 50% of the power originates at frequencies below 10 Hz. We show the reconstruction accuracy is highly dependent on the estimated Strehl ratio and simulations support the assumption that residual adaptive optics aberrations are the main limit to the reconstruction accuracy. We conclude that this sensor is ideally suited to remove post-adaptive optics non-common path tip tilt residuals. We discuss the next steps for the concept development, including optimizations of the lens and fiber, tuning of the correction algorithm and selection of optimal science cases. △ Less

Submitted 18 June, 2021; originally announced June 2021.

Comments: Accepted for publication in Journal of the Optical Society of America B (JOSA B)

Statistical Characterization of Airplane Delays

Authors: Evangelos Mitsokapas, Benjamin Schäfer, Rosemary J. Harris, Christian Beck

Abstract: The aviation industry is of great importance for a globally connected economy. Customer satisfaction with airlines and airport performance is considerably influenced by how much flights are delayed. But how should the delay be quantified with thousands of flights for each airport and airline? Here, we present a statistical analysis of arrival delays at several UK airports between 2018 and 2020. We… ▽ More The aviation industry is of great importance for a globally connected economy. Customer satisfaction with airlines and airport performance is considerably influenced by how much flights are delayed. But how should the delay be quantified with thousands of flights for each airport and airline? Here, we present a statistical analysis of arrival delays at several UK airports between 2018 and 2020. We establish a procedure to compare both mean delay and extreme events among airlines and airports, identifying a power-law decay of large delays. Furthermore, we note drastic changes in plane delay statistics during the COVID-19 pandemic. Finally, we find that delays are described by a superposition of simple distributions, leading to a superstatistics. △ Less

Submitted 31 March, 2021; v1 submitted 21 December, 2020; originally announced January 2021.

Comments: 14 pages, 10 figures

The upgrade of the ALICE TPC with GEMs and continuous readout

Authors: J. Adolfsson, M. Ahmed, S. Aiola, J. Alme, T. Alt, W. Amend, F. Anastasopoulos, C. Andrei, M. Angelsmark, V. Anguelov, A. Anjam, H. Appelshäuser, V. Aprodu, O. Arnold, M. Arslandok, D. Baitinger, M. Ball, G. G. Barnaföldi, E. Bartsch, P. Becht, R. Bellwied, A. Berdnikova, M. Berger, N. Bialas, P. Bialas , et al. (210 additional authors not shown)

Abstract: The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous re… ▽ More The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous readout electronics based on the SAMPA chip, an ALICE development, are replacing the previous elements. The construction of these new elements, together with their associated quality control procedures, is explained in detail. Finally, the readout chamber and front-end electronics cards replacement, together with the commissioning of the detector prior to installation in the experimental cavern, are presented. After a nine-year period of R&D, construction, and assembly, the upgrade of the TPC was completed in 2020. △ Less

Submitted 25 March, 2021; v1 submitted 17 December, 2020; originally announced December 2020.

Comments: 88 pages, 60 figures

Journal ref: JINST 16 (2021) P03022

Finite-size effects and optimal system sizes in simulations of surfactant micelle self-assembly

Authors: Jonathan J. Harris, George A. Pantelopulos, John E. Straub

Abstract: The spontaneous formation of micelles in aqueous solutions is governed by the amphipathic nature of surfactants and is practically interesting due to the regular use of micelles as membrane mimics, for the characterization of protein structure, and for drug design and delivery. We performed a systematic characterization of the finite-size effect observed in single-component dodecylphosphocholine (… ▽ More The spontaneous formation of micelles in aqueous solutions is governed by the amphipathic nature of surfactants and is practically interesting due to the regular use of micelles as membrane mimics, for the characterization of protein structure, and for drug design and delivery. We performed a systematic characterization of the finite-size effect observed in single-component dodecylphosphocholine (DPC) micelles with the coarse-grained MARTINI model. Of multiple coarse-grained solvent models investigated using large system sizes, the non-polarizable solvent model was found to most-accurately reproduce SANS spectra of 100 mM DPC in aqueous solution. We systematically investigated the finite-size effect at constant 100 mM concentration in 23 systems of sizes 40 to 150 DPC, confirming the finite-size effect to manifest as an oscillation in the mean micelle aggregation number about the thermodynamic aggregation number as the system size increases, mostly diminishing once the system supports formation of three micelles. The accuracy of employing a multiscale simulation approach to avoid finite-size effects in the micelle size distribution and SANS spectra using MARTINI and CHARMM36 was explored using multiple long timescale 500-DPC coarse-grained simulations which were back-mapped to CHARMM36 all-atom systems. It was found that the MARTINI model generally occupies more volume than the all-atom model, leading to the formation of micelles that are of a reasonable radius of gyration, but are smaller in aggregation number. The systematic characterization of the finite-size effect and exploration of multiscale modeling presented in this work provides guidance for the accurate modeling of micelles in simulations. △ Less

Submitted 1 December, 2020; originally announced December 2020.

Comments: 19 pages, 5 figures, 2 tables, Corresponding Author: John E. Straub

Mechanical Quantum Sensing in the Search for Dark Matter

Authors: Daniel Carney, Gordan Krnjaic, David C. Moore, Cindy A. Regal, Gadi Afek, Sunil Bhave, Benjamin Brubaker, Thomas Corbitt, Jonathan Cripe, Nicole Crisosto, Andrew Geraci, Sohitri Ghosh, Jack G. E. Harris, Anson Hook, Edward W. Kolb, Jonathan Kunjummen, Rafael F. Lang, Tongcang Li, Tongyan Lin, Zhen Liu, Joseph Lykken, Lorenzo Magrini, Jack Manley, Nobuyuki Matsumoto, Alissa Monte , et al. (10 additional authors not shown)

Abstract: Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mecha… ▽ More Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mechanical systems, in both the classical and quantum regimes, have enabled unprecedented levels of sensitivity. In this white paper, we outline recent ideas in the potential use of a range of solid-state mechanical sensing technologies to aid in the search for dark matter in a number of energy scales and with a variety of coupling mechanisms. △ Less

Submitted 13 August, 2020; originally announced August 2020.

Comments: White paper/overview based on a workshop held at the Joint Quantum Institute, Maryland. 12 pages, 4 figures, table summarizing many experimental systems, 118 references

Report number: FERMILAB-PUB-20-378-QIS-T

Journal ref: Quantum Sci. Technol. 6 024002, 2021 (invited)

Astronomical Applications of Multi-Core Fiber Technology

Authors: Nemanja Jovanovic, Robert J. Harris, Nick Cvetojevic

Abstract: Optical fibers have altered astronomical instrument design by allowing for a complex, often large instrument to be mounted in a remote and stable location with respect to the telescope. The fibers also enable the possibility to rearrange the signal from a focal plane to form a psuedo-slit at the entrance to a spectrograph, optimizing the detector usage and enabling the study of hundreds of thousan… ▽ More Optical fibers have altered astronomical instrument design by allowing for a complex, often large instrument to be mounted in a remote and stable location with respect to the telescope. The fibers also enable the possibility to rearrange the signal from a focal plane to form a psuedo-slit at the entrance to a spectrograph, optimizing the detector usage and enabling the study of hundreds of thousands of stars or galaxies simultaneously. Multi-core fibers in particular offer several favorable properties with respect to traditional fibers: 1) the separation between single-mode cores is greatly reduced and highly regular with respect to free standing fibers, 2) they offer a monolithic package with multi-fiber capabilities and 3) they operate at the diffraction limit. These properties have enabled the realization of single component photonic lanterns, highly simplified fiber Bragg gratings, and advanced fiber mode scramblers. In addition, the precise grid of cores has enabled the design of efficient single-mode fiber integral field units for spectroscopy. In this paper, we provide an overview of the broad range of applications enabled by multi-core fiber technology in astronomy and outline future areas of development. △ Less

Submitted 31 March, 2020; v1 submitted 4 February, 2020; originally announced February 2020.

Comments: 10 pages, 5 figures

Journal ref: IEEE Journal of Selected Topics in Quantum Electronics, Vol 26, No. 4, 2020

Coupled Time-lapse Full Waveform Inversion for Subsurface Flow Problems using Intrusive Automatic Differentiation

Authors: Dongzhuo Li, Kailai Xu, Jerry M. Harris, Eric Darve

Abstract: We describe a novel framework for estimating subsurface properties, such as rock permeability and porosity, from time-lapse observed seismic data by coupling full-waveform inversion, subsurface flow processes, and rock physics models. For the inverse modeling, we handle the back-propagation of gradients by an intrusive automatic differentiation strategy that offers three levels of user control: (1… ▽ More We describe a novel framework for estimating subsurface properties, such as rock permeability and porosity, from time-lapse observed seismic data by coupling full-waveform inversion, subsurface flow processes, and rock physics models. For the inverse modeling, we handle the back-propagation of gradients by an intrusive automatic differentiation strategy that offers three levels of user control: (1) at the wave physics level, we adopted the discrete adjoint method in order to use our existing high-performance FWI code; (2) at the rock physics level, we used built-in operators from the $\texttt{TensorFlow}$ backend; (3) at the flow physics level, we implemented customized PDE operators for the potential and nonlinear saturation equations. These three levels of gradient computation strike a good balance between computational efficiency and programming efficiency, and when chained together, constitute a coupled inverse system. We use numerical experiments to demonstrate that (1) the three-level coupled inverse problem is superior in terms of accuracy to a traditional decoupled inversion strategy; (2) it is able to simultaneously invert for parameters in empirical relationships such as the rock physics models; and (3) the inverted model can be used for reservoir performance prediction and reservoir management/optimization purposes. △ Less

Submitted 5 May, 2020; v1 submitted 16 December, 2019; originally announced December 2019.

Comments: 27 pages, 14 figures

Broadband, millimeter-wave antireflection coatings for large-format, cryogenic aluminum oxide optics

Authors: A. Nadolski, J. D. Vieira, J. A. Sobrin, A. M. Kofman, P. A. R. Ade, Z. Ahmed, A. J. Anderson, J. S. Avva, R. Basu Thakur, A. N. Bender, B. A. Benson, L. Bryant, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, J. R. Cheshire IV, G. E. Chesmore, J. F. Cliche, A. Cukierman, T. de Haan, M. Dierickx, J. Ding, D. Dutcher, W. Everett , et al. (64 additional authors not shown)

Abstract: We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of com… ▽ More We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of commercially-available, polytetrafluoroethylene-based, dielectric sheet material. The lenslet coating is molded to fit the 150 mm diameter arrays directly while the large-diameter lenses are coated using a tiled approach. We review the fabrication processes for both prescriptions then discuss laboratory measurements of their transmittance and reflectance. In addition, we present the inferred refractive indices and loss tangents for the coating materials and the aluminum oxide substrate. We find that at 150 GHz and 300 K the large-format coating sample achieves (97 +/- 2)% transmittance and the lenslet coating sample achieves (94 +/- 3)% transmittance. △ Less

Submitted 2 March, 2020; v1 submitted 6 December, 2019; originally announced December 2019.

Comments: 19 pages, 11 figures; submitted 05 Dec 2019, accepted 26 Feb 2020

Journal ref: Applied Optics, Vol. 59, Issue 10, pp. 3285-3295 (2020)

First Results from an Event Synchronized -- High Repetition Thomson Scattering System at Wendelstein 7-X

Authors: Hannes Damm, Ekkehard Pasch, Andreas Dinklage, Jürgen Baldzuhn, Sergey Bozhenkov, Kai Jakob Brunner, Florian Effenberg, Golo Fuchert, Joachim Geiger, Jeffrey Harris, Jens Knauer, Petra Kornejew, Thierry Kremeyer, Maciej Krychowiak, Jonathan Schilling, Oliver Schmitz, Evan Scott, Victoria Winters, the Wendelstein 7-X Team

Abstract: The Wendelstein 7-X (W7-X) Thomson scattering (TS) diagnostic was upgraded to transiently achieve kilohertz sampling rates combined with adjustable measuring times. The existing Nd:YAG lasers are employed to repetitively emit "bursts", i.e. multiple laser pulses in a short time interval. Appropriately timing burst in the three available lasers, up to twelve evenly spaced consecutive measurements p… ▽ More The Wendelstein 7-X (W7-X) Thomson scattering (TS) diagnostic was upgraded to transiently achieve kilohertz sampling rates combined with adjustable measuring times. The existing Nd:YAG lasers are employed to repetitively emit "bursts", i.e. multiple laser pulses in a short time interval. Appropriately timing burst in the three available lasers, up to twelve evenly spaced consecutive measurements per burst are possible. The pulse-to-pulse increment within a burst can be tuned from 2 ms to 33.3 ms (500 kHz - 30 Hz). Additionally, an event trigger system was developed to synchronize the burst Thomson scattering measurements to plasma events. Exemplary, a case of fast electron density and temperature evolution after cryogenic H2 pellet injection is presented in order to demonstrate the capabilities of the method. △ Less

Submitted 13 August, 2019; v1 submitted 30 June, 2019; originally announced July 2019.

Comments: 11 pages, 5 figures, To be published as proceeding to the 3rd European Conference on Plasma Diagnostics 2019 in Lisbon in the Proceedings Section of the Journal of Instrumentation (JINST)

A next-generation LHC heavy-ion experiment

Authors: D. Adamová, G. Aglieri Rinella, M. Agnello, Z. Ahammed, D. Aleksandrov, A. Alici, A. Alkin, T. Alt, I. Altsybeev, D. Andreou, A. Andronic, F. Antinori, P. Antonioli, H. Appelshäuser, R. Arnaldi, I. C. Arsene, M. Arslandok, R. Averbeck, M. D. Azmi, X. Bai, R. Bailhache, R. Bala, L. Barioglio, G. G. Barnaföldi, L. S. Barnby , et al. (374 additional authors not shown)

Abstract: The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with th… ▽ More The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with the innermost layers possibly positioned inside the beam pipe. In addition to superior tracking and vertexing capabilities over a wide momentum range down to a few tens of MeV/$c$, the detector will provide particle identification via time-of-flight determination with about 20~ps resolution. In addition, electron and photon identification will be performed in a separate shower detector. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector. △ Less

Submitted 2 May, 2019; v1 submitted 31 January, 2019; originally announced February 2019.

Comments: Input to the 2020 Update of the European Particle Physics Strategy

Electrochemical kinetics of SEI growth on carbon black, I: Experiments

Authors: Peter M. Attia, Supratim Das, Stephen J. Harris, Martin Z. Bazant, William C. Chueh

Abstract: Growth of the solid electrolyte interphase (SEI) is a primary driver of capacity fade in lithium-ion batteries. Despite its importance to this device and intense research interest, the fundamental mechanisms underpinning SEI growth remain unclear. In Part I of this work, we present an electroanalytical method to measure the dependence of SEI growth on potential, current magnitude, and current dire… ▽ More Growth of the solid electrolyte interphase (SEI) is a primary driver of capacity fade in lithium-ion batteries. Despite its importance to this device and intense research interest, the fundamental mechanisms underpinning SEI growth remain unclear. In Part I of this work, we present an electroanalytical method to measure the dependence of SEI growth on potential, current magnitude, and current direction during galvanostatic cycling of carbon black/Li half cells. We find that SEI growth strongly depends on all three parameters; most notably, we find SEI growth rates increase with nominal C rate and are significantly higher on lithiation than on delithiation. We observe this directional effect in both galvanostatic and potentiostatic experiments and discuss hypotheses that could explain this observation. This work identifies a strong coupling between SEI growth and charge storage (e.g., intercalation and capacitance) in carbon negative electrodes. △ Less

Submitted 14 January, 2019; v1 submitted 4 January, 2019; originally announced January 2019.

Comments: 35 pages, 8 figures

Journal ref: J. Electrochem. Soc., 166(4), E97 (2019)

Demonstration of a photonic lantern low order wavefront sensor using an adaptive optics testbed

Authors: Mark K. Corrigan, Timothy J. Morris, Robert J. Harris, Theodoros Anagnos

Abstract: We demonstrate the use of an optimized 5 core photonic lantern (PL) to simultaneously measure tip/tilt errors at the telescope focal plane, while also providing the input to an instrument. By replacing a single mode (SM) fiber with the PL we show that it is possible to stabilize the input PSF to an instrument due to non-common path tip/tilt aberrations in an adaptive optics system. We show the PL… ▽ More We demonstrate the use of an optimized 5 core photonic lantern (PL) to simultaneously measure tip/tilt errors at the telescope focal plane, while also providing the input to an instrument. By replacing a single mode (SM) fiber with the PL we show that it is possible to stabilize the input PSF to an instrument due to non-common path tip/tilt aberrations in an adaptive optics system. We show the PL in two different regimes, (i) using only the outer cores for tip/tilt measurements while feeding an instrument with the central core and, (ii) using all cores to measure tip/tilt when used in an instrument such as a spectrograph. In simulations our PL displays the ability to retrieve tip/tilt measurements in a linear range of +/- 55 milliarcseconds. At the designed central wavelength of 1.55 microns, configuration (i) matches the throughput of an on-axis SM fiber but declines as we move away from this wavelength. In configuration (ii) we make use of the whole multimode input of the PL resulting in a potential increase of overall throughput compared to a SM fiber, while eliminating modal noise. △ Less

Submitted 21 September, 2018; originally announced September 2018.

Journal ref: Proceedings Volume 10703, Adaptive Optics Systems VI; 107035H (2018)

Non-Hermitian adiabatic transport in spaces of exceptional points

Authors: J. Höller, N. Read, J. G. E. Harris

Abstract: We consider the space of $n \times n$ non-Hermitian Hamiltonians ($n=2$, $3$, . . .) that are equivalent to a single $n\times n$ Jordan block. We focus on adiabatic transport around a closed path (i.e. a loop) within this space, in the limit as the time-scale $T=1/\varepsilon$ taken to traverse the loop tends to infinity. We show that, for a certain class of loops and a choice of initial state, th… ▽ More We consider the space of $n \times n$ non-Hermitian Hamiltonians ($n=2$, $3$, . . .) that are equivalent to a single $n\times n$ Jordan block. We focus on adiabatic transport around a closed path (i.e. a loop) within this space, in the limit as the time-scale $T=1/\varepsilon$ taken to traverse the loop tends to infinity. We show that, for a certain class of loops and a choice of initial state, the state returns to itself and acquires a complex phase that is $\varepsilon^{-1}$ times an expansion in powers of $\varepsilon^{1/n}$. The exponential of the term of $n$th order (which is equivalent to the "geometric" or Berry phase modulo $2π$), is thus independent of $\varepsilon$ as $\varepsilon\to0$; it depends only on the homotopy class of the loop and is an integer power of $e^{2πi/n}$. One of the conditions under which these results hold is that the state being transported is, for all points on the loop, that of slowest decay. △ Less

Submitted 16 September, 2020; v1 submitted 14 September, 2018; originally announced September 2018.

Comments: 4+3 pages. v2: slight title change; 9 pages, now in regular article format; as published

Journal ref: Phys. Rev. A 102, 032216 (2020)

High-frequency cavity optomechanics using bulk acoustic phonons

Authors: Prashanta Kharel, Glen I. Harris, Eric A. Kittlaus, William H. Renninger, Nils T. Otterstrom, Jack G. E. Harris, Peter T. Rakich

Abstract: To date, micro- and nano-scale optomechanical systems have enabled many proof-of-principle quantum operations through access to high-frequency (GHz) phonon modes that are readily cooled to their thermal ground state. However, minuscule amounts of absorbed light produce excessive heating that can jeopardize robust ground state operation within such microstructures. In contrast, we demonstrate an al… ▽ More To date, micro- and nano-scale optomechanical systems have enabled many proof-of-principle quantum operations through access to high-frequency (GHz) phonon modes that are readily cooled to their thermal ground state. However, minuscule amounts of absorbed light produce excessive heating that can jeopardize robust ground state operation within such microstructures. In contrast, we demonstrate an alternative strategy for accessing high-frequency ($13$ GHz) phonons within macroscopic systems (cm-scale). Counterintuitively, we show that these macroscopic systems, with motional masses that are $>20$ million times larger than those of micro-scale counterparts, offer a complementary path towards robust quantum operations. Utilizing bulk acoustic phonons to mediate resonant coupling between two distinct modes of an optical cavity, we demonstrate the ability to perform beam-splitter and entanglement operations at MHz rates on an array of phonon modes, opening doors to applications ranging from quantum memories and microwave-to-optical conversion to high-power laser oscillators. △ Less

Submitted 20 August, 2018; originally announced September 2018.

Comments: 10 pages, 4 figures

Perturbation theory of optical resonances of deformed dielectric spheres

Authors: Andrea Aiello, Jack G. E. Harris, Florian Marquardt

Abstract: We analyze the optical resonances of a dielectric sphere whose surface has been slightly deformed in an arbitrary way. Setting up a perturbation series up to second order, we derive both the frequency shifts and modified linewidths. Our theory is applicable, for example, to freely levitated liquid drops or solid spheres, which are deformed by thermal surface vibrations, centrifugal forces or arbit… ▽ More We analyze the optical resonances of a dielectric sphere whose surface has been slightly deformed in an arbitrary way. Setting up a perturbation series up to second order, we derive both the frequency shifts and modified linewidths. Our theory is applicable, for example, to freely levitated liquid drops or solid spheres, which are deformed by thermal surface vibrations, centrifugal forces or arbitrary surface waves. A dielectric sphere is effectively an open system whose description requires the introduction of non-Hermitian operators characterized by complex eigenvalues and not normalizable eigenfunctions. We avoid these difficulties using the Kapur-Peierls formalism which enables us to extend the popular Rayleigh-Schrödinger perturbation theory to the case of electromagnetic Debye's potentials describing the light fields inside and outside the near-spherical dielectric object. We find analytical formulas, valid within certain limits, for the deformation-induced first- and second-order corrections to the central frequency and bandwidth of a resonance. As an application of our method, we compare our results with preexisting ones finding full agreement. △ Less

Submitted 25 January, 2019; v1 submitted 7 September, 2018; originally announced September 2018.

Comments: 18 pages, 7 figures

Journal ref: Phys. Rev. A 100, 023837 (2019)

Nonreciprocal control and cooling of phonon modes in an optomechanical system

Authors: H. Xu, Luyao Jiang, A. A. Clerk, J. G. E. Harris

Abstract: Phononic resonators play important roles in settings that range from gravitational wave detectors to cellular telephones. They serve as high-performance transducers, sensors, and filters by offering low dissipation, tunable coupling to diverse physical systems, and compatibility with a wide range of frequencies, materials, and fabrication processes. Systems of phononic resonators typically obey re… ▽ More Phononic resonators play important roles in settings that range from gravitational wave detectors to cellular telephones. They serve as high-performance transducers, sensors, and filters by offering low dissipation, tunable coupling to diverse physical systems, and compatibility with a wide range of frequencies, materials, and fabrication processes. Systems of phononic resonators typically obey reciprocity, which ensures that the phonon transmission coefficient between any two resonators is independent of the direction of transmission. Reciprocity must be broken to realize devices (such as isolators and circulators) that provide one-way propagation of acoustic energy between resonators. Such devices are crucial for protecting active elements, mitigating noise, and operating full-duplex transceivers. To date, nonreciprocal phononic devices have not combined the features necessary for robust operation: strong nonreciprocity, in situ tunability, compact integration, and continuous operation. Furthermore, they have been applied only to coherent signals (rather than fluctuations or noise), and have been realized exclusively in travelling-wave systems (rather than resonators). Here we describe a cavity optomechanical scheme that produces robust nonreciprocal coupling between phononic resonators. This scheme provides ~ 30 dB of isolation and can be tuned in situ simply via the phases of the drive tones applied to the cavity. In addition, by directly monitoring the resonators' dynamics we show that this nonreciprocity can be used to control thermal fluctuations, and that this control represents a new resource for cooling phononic resonators. △ Less

Submitted 10 July, 2018; originally announced July 2018.

Comments: 11 pages, 4 figures

Particle identification studies with a full-size 4-GEM prototype for the ALICE TPC upgrade

Authors: M. M. Aggarwal, Z. Ahammed, S. Aiola, J. Alme, T. Alt, W. Amend, A. Andronic, V. Anguelov, H. Appelshäuser, M. Arslandok, R. Averbeck, M. Ball, G. G. Barnaföldi, E. Bartsch, R. Bellwied, G. Bencedi, M. Berger, N. Bialas, P. Bialas, L. Bianchi, S. Biswas, L. Boldizsár, L. Bratrud, P. Braun-Munzinger, M. Bregant , et al. (155 additional authors not shown)

Abstract: A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an interaction rate of about 50 kHz, which is about a factor of 50 above the present readout rate of the TPC. This will result in a significant improvement on the sensitivit… ▽ More A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an interaction rate of about 50 kHz, which is about a factor of 50 above the present readout rate of the TPC. This will result in a significant improvement on the sensitivity to rare probes that are considered key observables to characterize the QCD matter created in such collisions. In order to make full use of this luminosity, the currently used gated Multi-Wire Proportional Chambers will be replaced. The upgrade relies on continuously operated readout detectors employing Gas Electron Multiplier technology to retain the performance in terms of particle identification via the measurement of the specific energy loss by ionization d$E$/d$x$. A full-size readout chamber prototype was assembled in 2014 featuring a stack of four GEM foils as an amplification stage. The performance of the prototype was evaluated in a test beam campaign at the CERN PS. The d$E$/d$x$ resolution complies with both the performance of the currently operated MWPC-based readout chambers and the challenging requirements of the ALICE TPC upgrade program. Detailed simulations of the readout system are able to reproduce the data. △ Less

Submitted 17 June, 2018; v1 submitted 8 May, 2018; originally announced May 2018.

Comments: Submitted to NIM A

Journal ref: Nucl. Instrum. Meth. A903 (2018), 215-223

Full waveform inversion with nonlocal similarity and model-derivative domain adaptive sparsity-promoting regularization

Authors: Dongzhuo Li, Jerry M. Harris

Abstract: Full waveform inversion (FWI) is a highly nonlinear and ill-posed problem. On one hand, it can be easily trapped in a local minimum. On the other hand, the inversion results may exhibit strong artifacts and reduced resolution because of inadequate constraint from data. Proper regularizations are necessary to reduce such artifacts and steer the inversion towards a good direction. In this study, we… ▽ More Full waveform inversion (FWI) is a highly nonlinear and ill-posed problem. On one hand, it can be easily trapped in a local minimum. On the other hand, the inversion results may exhibit strong artifacts and reduced resolution because of inadequate constraint from data. Proper regularizations are necessary to reduce such artifacts and steer the inversion towards a good direction. In this study, we propose a novel adaptive sparsity-promoting regularization for FWI in the model-derivative domain which exploits nonlocal similarity in the model. This regularization can be viewed as a generalization of total variation (TV) with multi-class learning-based dictionaries. The dictionaries incorporate the prior information of nonlocal similarity into the inversion, exploiting the fact that geological patterns at different places are similar to some others up to affine transformations (translation, rotation and scaling). Such nonlocal similarity priors effectively reduce the degrees of freedom in model parameters, and may also mitigate the problem of local minima. The formulated optimization problem is solved by the Alternating Direction Method of Multipliers (ADMM). By interpreting the iterative scheme, we find our method closely connected with image processing techniques and convolutional neural networks (CNN). We test our proposed method on a modified BP 2004 velocity model and a smoothed Marmousi model. Compared with traditional FWI, our technique can better reconstruct sharp edges such as salt body boundaries, and is also able to effectively reduce artifacts. Compared with TV, our result is less blocky and more geologically realistic. Quantitatively, our result has the highest structural similarity index (SSIM) and also the lowest model mean square error. △ Less

Submitted 5 August, 2018; v1 submitted 30 March, 2018; originally announced March 2018.

Comments: 46 pages, 14 figures

On-Chip Laser Power Delivery System for Dielectric Laser Accelerators

Authors: Tyler W. Hughes, Si Tan, Zhexin Zhao, Neil V. Sapra, Yun Jo Lee, Kenneth J. Leedle, Huiyang Deng, Yu Miao, Dylan S. Black, Minghao Qi, Olav Solgaard, James S. Harris, Jelena Vuckovic, Robert L. Byer, Shanhui Fan

Abstract: We propose an on-chip optical power delivery system for dielectric laser accelerators based on a fractal 'tree-branch' dielectric waveguide network. This system replaces experimentally demanding free-space manipulations of the driving laser beam with chip-integrated techniques based on precise nano-fabrication, enabling access to orders of magnitude increases in the interaction length and total en… ▽ More We propose an on-chip optical power delivery system for dielectric laser accelerators based on a fractal 'tree-branch' dielectric waveguide network. This system replaces experimentally demanding free-space manipulations of the driving laser beam with chip-integrated techniques based on precise nano-fabrication, enabling access to orders of magnitude increases in the interaction length and total energy gain for these miniature accelerators. Based on computational modeling, in the relativistic regime, our laser delivery system is estimated to provide 21 keV of energy gain over an acceleration length of 192 um with a single laser input, corresponding to a 108 MV/m acceleration gradient. The system may achieve 1 MeV of energy gain over a distance less than 1 cm by sequentially illuminating 49 identical structures. These findings are verified by detailed numerical simulation and modeling of the subcomponents and we provide a discussion of the main constraints, challenges, and relevant parameters in regards to on-chip laser coupling for dielectric laser accelerators. △ Less

Submitted 13 September, 2017; originally announced September 2017.

Comments: 14 pages

Journal ref: Phys. Rev. Applied 9, 054017 (2018)

Quantum optomechanics in a liquid

Authors: A. B. Shkarin, A. D. Kashkanova, C. D. Brown, S. Garcia, K. Ott, J. Reichel, J. G. E. Harris

Abstract: Optomechanical systems provide a means for studying and controlling quantum effects in the motion of macroscopic objects. To date, quantum optomechanical effects have been studied in objects made from solids and gases. Here we describe measurements of quantum behavior in the vibrations of a liquid body. Specifically, we monitor the fluctuations of an individual acoustic standing wave in superfluid… ▽ More Optomechanical systems provide a means for studying and controlling quantum effects in the motion of macroscopic objects. To date, quantum optomechanical effects have been studied in objects made from solids and gases. Here we describe measurements of quantum behavior in the vibrations of a liquid body. Specifically, we monitor the fluctuations of an individual acoustic standing wave in superfluid liquid helium, and find that it displays the characteristic signatures of zero-point motion and measurement back-action. This opens the possibility of exploiting the properties of liquids in general (and superfluid helium in particular) to access qualitatively new regimes of quantum optomechanics. △ Less

Submitted 8 September, 2017; originally announced September 2017.

Comments: 53 pages, 15 figures, 1 table (including supplementary information)

Journal ref: Phys. Rev. Lett. 122, 153601 (2019)

Improving the Limits of Detection of Low Background Alpha Emission Measurements

Authors: Brendan D. McNally, Stuart Coleman, Jack T. Harris, William K. Warburton

Abstract: Alpha particle emission, even at extremely low levels, is a significant issue in the search for rare events (e.g., double beta decay, dark matter detection). Traditional measurement techniques require long counting times to measure low sample rates in the presence of much larger instrumental backgrounds. To address this, a commercially available instrument developed by XIA uses pulse shape analysi… ▽ More Alpha particle emission, even at extremely low levels, is a significant issue in the search for rare events (e.g., double beta decay, dark matter detection). Traditional measurement techniques require long counting times to measure low sample rates in the presence of much larger instrumental backgrounds. To address this, a commercially available instrument developed by XIA uses pulse shape analysis to discriminate alpha emissions produced by the sample from those produced by other surfaces of the instrument itself. Experience with this system has uncovered two residual sources of background: cosmogenics and radon emanation from internal components. A development program is underway to enhance the system and extend the pulse shape analysis technique further, so that these residual sources can be identified and rejected as well. In this paper, we review the theory of operation and pulse shape analysis techniques used in XIA`s alpha counter, and briefly explore data suggesting the origin of the residual background terms. We will then present our approach to enhance the system`s ability to identify and reject these terms. Finally, we will describe a prototype system that incorporates our concepts and demonstrates their feasibility. △ Less

Submitted 31 July, 2017; originally announced July 2017.

Comments: 8 pages, 13 figures, presented at LRT-2017

Titanium dioxide hole-blocking layer in ultra-thin-film crystalline silicon solar cells

Authors: Yangsen Kang, Huiyang Deng, Yusi Chen, Yijie Huo, Jieyang Jia, Li Zhao, Zain Zaidi, Kai Zang, James S. Harris

Abstract: One of the remaining obstacles to approaching the theoretical efficiency limit of crystalline silicon (c-Si) solar cells is the exceedingly high interface recombination loss for minority carriers at the Ohmic contacts. In ultra-thin-film c-Si solar cells, this contact recombination loss is far more severe than for traditional thick cells due to the smaller volume and higher minority carrier concen… ▽ More One of the remaining obstacles to approaching the theoretical efficiency limit of crystalline silicon (c-Si) solar cells is the exceedingly high interface recombination loss for minority carriers at the Ohmic contacts. In ultra-thin-film c-Si solar cells, this contact recombination loss is far more severe than for traditional thick cells due to the smaller volume and higher minority carrier concentration of the former. This paper presents a novel design of an electron passing (Ohmic) contact to n-type Si that is hole-blocking with significantly reduced hole recombination. This contact is formed by depositing a thin titanium dioxide (TiO2) layer to form a silicon metal-insulator-semiconductor (MIS) contact. A 2 μm thick Si cell with this TiO2 MIS contact achieved an open circuit voltage (Voc) of 645 mV, which is 10 mV higher than that of an ultra-thin cell with a metal contact. This MIS contact demonstrates a new path for ultra-thin-film c-Si solar cells to achieve high efficiencies as high as traditional thick cells, and enables the fabrication of high-efficiency c-Si solar cells at a lower cost. △ Less

Submitted 9 May, 2017; originally announced May 2017.

Current transmission and nonlinear effects in un-gated thermionic cathode RF guns

Authors: J. P. Edelen, J. R. Harris

Abstract: Un-gated thermionic cathode RF guns are well known as a robust source of electrons for many accelerator applications. These sources are in principle scalable to high currents without degradation of the transverse emittance due to control grids but they are also known for being limited by back-bombardment. While back-bombardment presents a significant limitation, there is still a lack of general un… ▽ More Un-gated thermionic cathode RF guns are well known as a robust source of electrons for many accelerator applications. These sources are in principle scalable to high currents without degradation of the transverse emittance due to control grids but they are also known for being limited by back-bombardment. While back-bombardment presents a significant limitation, there is still a lack of general understanding on how emission over the whole RF period will affect the nature of the beams produced from these guns. In order to improve our understanding of how these guns can be used in general we develop analytical models that predict the transmission efficiency as a function of the design parameters, study how bunch compression and emission enhancement caused by Schottky barrier lowering affect the output current profile in the gun, and study the onset of space-charge limited effects and the resultant virtual cathode formation leading to a modulation in the output current distribution. △ Less

Submitted 3 May, 2017; originally announced May 2017.

Topological dynamics in an optomechanical system with highly non-degenerate modes

Authors: H. Xu, D. Mason, Luyao Jiang, J. G. E. Harris

Abstract: Non-Hermitian systems exhibit phenomena that are qualitatively different from those of Hermitian systems and have been exploited to achieve a number of ends, including the generation of exceptional points, nonreciprocal dynamics, non-orthogonal normal modes, and topological operations. However to date these effects have only been accessible with nearly-degenerate modes (i.e., modes with frequency… ▽ More Non-Hermitian systems exhibit phenomena that are qualitatively different from those of Hermitian systems and have been exploited to achieve a number of ends, including the generation of exceptional points, nonreciprocal dynamics, non-orthogonal normal modes, and topological operations. However to date these effects have only been accessible with nearly-degenerate modes (i.e., modes with frequency difference comparable to their linewidth and coupling rate). Here we demonstrate an optomechanical scheme that extends topological control to highly non-degenerate modes of a non-Hermitian system. Specifically, we induce a "virtual exceptional point" between two mechanical modes whose frequencies differ by >10^3 times their linewidth and coupling rate, and use adiabatic topological operations to transfer energy between these modes. This scheme can be readily implemented in many physical systems, potentially extending the utility of non-Hermitian dynamics to a much wider range of settings. △ Less

Submitted 21 March, 2017; originally announced March 2017.

Observation Of Repetition-Rate Dependent Emission From an Un-Gated Thermionic Cathode RF Gun

Authors: J. P. Edelen, Y. Sun, J. R. Harris, J. W. Lewellen

Abstract: Recent work at Fermilab in collaboration with the Advanced Photon Source and members of other national labs, designed an experiment to study the relationship between the RF repetition rate and the average current per RF pulse. While existing models anticipate a direct relationship between these two parameters we observed an inverse relationship. We believe this is a result of damage to the barium… ▽ More Recent work at Fermilab in collaboration with the Advanced Photon Source and members of other national labs, designed an experiment to study the relationship between the RF repetition rate and the average current per RF pulse. While existing models anticipate a direct relationship between these two parameters we observed an inverse relationship. We believe this is a result of damage to the barium coating on the cathode surface caused by a change in back-bombardment power that is unaccounted for in the existing theories. These observations shed new light on the challenges and fundamental limitations associated with scaling an un-gated thermionic cathode RF gun to high average current machines. △ Less

Submitted 24 February, 2017; originally announced February 2017.

Comments: 4 pp

Report number: Fermilab-Conf-16-414-AD

Design of racetrack ring resonator based dielectric laser accelerators

Authors: Huiyang Deng, Jiaqi Jiang, Yu Miao, Kenneth J. Leedle, Hongquan Li, Olav Solgaard, Robert L. Byer, James S. Harris

Abstract: In this paper, we propose a novel design of dielectric laser-driven accelerator (DLA) utilizing evanescent electric field of racetrack ring resonator structures. Driven by laser light with the correctly designed optical phase window, sustained acceleration of electrons with controlled deflection is shown. Based on this design, we calculate an acceleration from 30 keV to 148.312 keV in 104.655 μm u… ▽ More In this paper, we propose a novel design of dielectric laser-driven accelerator (DLA) utilizing evanescent electric field of racetrack ring resonator structures. Driven by laser light with the correctly designed optical phase window, sustained acceleration of electrons with controlled deflection is shown. Based on this design, we calculate an acceleration from 30 keV to 148.312 keV in 104.655 μm using a cascaded 11-stage racetrack ring resonators. This new idea poses a solution for on-chip integration of many DLA stages, while maintains high average accelerating gradients, providing a potential practical realization for "accelerator on a chip". △ Less

Submitted 31 January, 2017; originally announced January 2017.

Comments: 5 pages, 3 figures, 1 table

Transverse and longitudinal characterization of electron beams using interaction with optical near-fields

Authors: Martin Kozák, Joshua McNeur, Kenneth J. Leedle, Huiyang Deng, Norbert Schönenberger, Axel Ruehl, Ingmar Hartl, Heinar Hoogland, Ronald Holzwarth, James S. Harris, Robert L. Byer, Peter Hommelhoff

Abstract: We demonstrate an experimental technique for both transverse and longitudinal characterization of bunched femtosecond free electron beams. The operation principle is based on monitoring of the current of electrons that obtained an energy gain during the interaction with the synchronized optical near-field wave excited by femtosecond laser pulses. The synchronous accelerating/decelerating fields co… ▽ More We demonstrate an experimental technique for both transverse and longitudinal characterization of bunched femtosecond free electron beams. The operation principle is based on monitoring of the current of electrons that obtained an energy gain during the interaction with the synchronized optical near-field wave excited by femtosecond laser pulses. The synchronous accelerating/decelerating fields confined to the surface of a silicon nanostructure are characterized using a highly focused sub-relativistic electron beam. Here the transverse spatial resolution of 450 nm and femtosecond temporal resolution achievable by this technique are demonstrated. △ Less

Submitted 29 November, 2016; originally announced November 2016.

Journal ref: Optics Letters 41, 3435-3438 (2016)

Photothermal optomechanics in superfluid helium coupled to a fiber-based cavity

Authors: A. D. Kashkanova, A. B. Shkarin, C. D. Brown, N. E. Flowers-Jacobs, L. Childress, S. W. Hoch, L. Hohmann, K. Ott, J. Reichel, J. G. E. Harris

Abstract: Presented in this paper are measurements of an optomechanical device in which various acoustic modes of a sample of superfluid helium couple to a fiber-based optical cavity. In contrast with recent work on the paraxial acoustic mode confined by the cavity mirrors, we focus specifically on the acoustic modes associated with the helium surrounding the cavity. This paper provides a framework for unde… ▽ More Presented in this paper are measurements of an optomechanical device in which various acoustic modes of a sample of superfluid helium couple to a fiber-based optical cavity. In contrast with recent work on the paraxial acoustic mode confined by the cavity mirrors, we focus specifically on the acoustic modes associated with the helium surrounding the cavity. This paper provides a framework for understanding how the acoustic modes depend on device geometry. The acoustic modes are observed using the technique of optomechanically induced transparency/amplification. The optomechanical coupling to these modes is found to be predominantly photothermal. △ Less

Submitted 23 September, 2016; v1 submitted 22 September, 2016; originally announced September 2016.

Comments: 13 pages, 8 figures

Modal noise characterisation of a hybrid reformatter

Authors: Izabela Spaleniak, David G. MacLachlan, Itandehui Gris-Sánchez, Debaditya Choudhury, Robert J. Harris, Alexander Arriola, Jeremy R. Allington-Smith, Timothy A. Birks, Robert R. Thomson

Abstract: This paper reports on the modal noise characterisation of a hybrid reformatter. The device consists of a multicore-fibre photonic lantern and an ultrafast laser-inscribed slit reformatter. It operates around 1550 nm and supports 92 modes. Photonic lanterns transform a multimode signal into an array of single-mode signals, and thus combine the high coupling efficiency of multimode fibres with the d… ▽ More This paper reports on the modal noise characterisation of a hybrid reformatter. The device consists of a multicore-fibre photonic lantern and an ultrafast laser-inscribed slit reformatter. It operates around 1550 nm and supports 92 modes. Photonic lanterns transform a multimode signal into an array of single-mode signals, and thus combine the high coupling efficiency of multimode fibres with the diffraction-limited performance of single-mode fibres. This paper presents experimental measurements of the device point spread function properties under different coupling conditions, and its throughput behaviour at high spectral resolution. The device demonstrates excellent scrambling but its point spread function is not completely stable. Mode field diameter and mode barycentre position at the device output vary as the multicore-fibre is agitated due to the fabrication imperfections. △ Less

Submitted 11 July, 2016; originally announced July 2016.

Comments: 9 pages, 9 figures, submitted to SPIE Astronomical Telescopes & Instrumentation 2016 (9912-78)

Elements of a dielectric laser accelerator

Authors: Joshua McNeur, Martin Kozák, Norbert Schönenberger, Kenneth J. Leedle, Huiyang Deng, Andrew Ceballos, Heinar Hoogland, Axel Ruehl, Ingmar Hartl, Ronald Holzwarth, Olav Solgaard, James S. Harris, Robert L. Byer, Peter Hommelhoff

Abstract: The widespread use of high energy particle beams in basic research, medicine and coherent X-ray generation coupled with the large size of modern radio frequency (RF) accelerator devices and facilities has motivated a strong need for alternative accelerators operating in regimes outside of RF. Working at optical frequencies, dielectric laser accelerators (DLAs) - transparent laser-driven nanoscale… ▽ More The widespread use of high energy particle beams in basic research, medicine and coherent X-ray generation coupled with the large size of modern radio frequency (RF) accelerator devices and facilities has motivated a strong need for alternative accelerators operating in regimes outside of RF. Working at optical frequencies, dielectric laser accelerators (DLAs) - transparent laser-driven nanoscale dielectric structures whose near fields can synchronously accelerate charged particles - have demonstrated high-gradient acceleration with a variety of laser wavelengths, materials, and electron beam parameters, potentially enabling miniaturized accelerators and table-top coherent x-ray sources. To realize a useful (i.e. scalable) DLA, crucial developments have remained: concatenation of components including sustained phase synchronicity to reach arbitrary final energies as well as deflection and focusing elements to keep the beam well collimated along the design axis. Here, all of these elements are demonstrated with a subrelativistic electron beam. In particular, by creating two interaction regions via illumination of a nanograting with two spatio-temporally separated pulsed laser beams, we demonstrate a phase-controlled doubling of electron energy gain from 0.7 to 1.4 keV (2.5 percent to 5 percent of the initial beam energy) and through use of a chirped grating geometry, we overcome the dephasing limit of 25 keV electrons, increasing their energy gains to a laser power limited 10 percent of their initial energy. Further, optically-driven transverse focusing of the electron beam with focal lengths below 200 microns is achieved via a parabolic grating geometry. These results lay the cornerstone for future miniaturized phase synchronous vacuum-structure-based accelerators. △ Less

Submitted 5 June, 2016; v1 submitted 26 April, 2016; originally announced April 2016.

Combination of two Gas Electron Multipliers and a Micromegas as gain elements for a time projection chamber

Authors: S. Aiola, R. J. Ehlers, S. Gu, J. W. Harris, R. Majka, J. D. Mulligan, M. Oliver, J. Schambach, N. Smirnov

Abstract: We measured the properties of a novel combination of two Gas Electron Multipliers with a Micromegas for use as amplification devices in high-rate gaseous time projection chambers. The goal of this design is to minimize the buildup of space charge in the drift volume of such detectors in order to eliminate the standard gating grid and its resultant dead time, while preserving good tracking and part… ▽ More We measured the properties of a novel combination of two Gas Electron Multipliers with a Micromegas for use as amplification devices in high-rate gaseous time projection chambers. The goal of this design is to minimize the buildup of space charge in the drift volume of such detectors in order to eliminate the standard gating grid and its resultant dead time, while preserving good tracking and particle identification performance. We measured the positive ion back-flow and energy resolution at various element gains and electric fields, using a variety of gases, and additionally studied crosstalk effects and discharge rates. At a gain of 2000, this configuration achieves an ion back-flow below 0.4% and an energy resolution better than $σ/\text{E}=12\%$ for $^{55}$Fe X-rays. △ Less

Submitted 28 March, 2016; originally announced March 2016.

Comments: 22 Pages, 9 Figures. Submitted to Nuclear Instruments and Methods

Topological energy transfer in an optomechanical system with exceptional points

Authors: H. Xu, D. Mason, L. Jiang, J. G. E. Harris

Abstract: Topological operations have the merit of achieving certain goals without requiring accurate control over local operational details. To date, topological operations have been used to control geometric phases, and have been proposed as a means for controlling the state of certain systems within their degenerate subspaces[1-8]. More recently, it was predicted that topological operations can be extend… ▽ More Topological operations have the merit of achieving certain goals without requiring accurate control over local operational details. To date, topological operations have been used to control geometric phases, and have been proposed as a means for controlling the state of certain systems within their degenerate subspaces[1-8]. More recently, it was predicted that topological operations can be extended to transfer energy between normal modes, provided that the system possesses a specific type of degeneracy known as an exceptional point (EP)[9-11]. Here we demonstrate the transfer of energy between two modes of a cryogenic optomechanical device by topological operations. We show that this transfer arises from the presence of an EP in the device's spectrum. We also show that this transfer is non-reciprocal[12-14]. These results open new directions in system control; they also open the possibility of exploring other dynamical effects related to EPs[15,16], as well as the behavior of thermal and quantum fluctuations in the vicinity of EPs. △ Less

Submitted 28 March, 2016; v1 submitted 22 February, 2016; originally announced February 2016.

Journal ref: Nature 537, 80 (2016)

Superfluid Brillouin Optomechanics

Authors: A. D. Kashkanova, A. B. Shkarin, C. D. Brown, N. E. Flowers-Jacobs, L. Childress, S. W. Hoch, L. Hohmann, K. Ott, J. Reichel, J. G. E. Harris

Abstract: Optomechanical systems couple an electromagnetic cavity to a mechanical resonator which is typically formed from a solid object. The range of phenomena accessible to these systems depends on the properties of the mechanical resonator and on the manner in which it couples to the cavity fields. In both respects, a mechanical resonator formed from superfluid liquid helium offers several appealing fea… ▽ More Optomechanical systems couple an electromagnetic cavity to a mechanical resonator which is typically formed from a solid object. The range of phenomena accessible to these systems depends on the properties of the mechanical resonator and on the manner in which it couples to the cavity fields. In both respects, a mechanical resonator formed from superfluid liquid helium offers several appealing features: low electromagnetic absorption, high thermal conductivity, vanishing viscosity, well-understood mechanical loss, and in situ alignment with cryogenic cavities. In addition, it offers degrees of freedom that differ qualitatively from those of a solid. Here, we describe an optomechanical system consisting of a miniature optical cavity filled with superfluid helium. The cavity mirrors define optical and mechanical modes with near-perfect overlap, resulting in an optomechanical coupling rate ~3 kHz. This coupling is used to drive the superfluid; it is also used to observe the superfluid's thermal motion, resolving a mean phonon number as low as 11. △ Less

Submitted 17 February, 2016; originally announced February 2016.

Comments: 41 pages, 7 figures (including supplementary information). The following article has been submitted to Nature Physics