Showing 1–32 of 32 results for author: Harris, C

High-Precision Excited-State Nuclear Recoil Spectroscopy with Superconducting Sensors

Authors: C. Bray, S. Fretwell, L. A. Zepeda-Ruiz, I. Kim, A. Samanta, K. Wang, C. Stone-Whitehead, W. K. Warburton, F. Ponce, K. G. Leach, R. Abells, P. Amaro, A. Andoche, R. Cantor, D. Diercks, M. Guerra, A. Hall, C. Harris, J. Harris, L. Hayen, P. A. Hervieux, G. B. Kim, A. Lennarz, V. Lordi, J. Machado , et al. (8 additional authors not shown)

Abstract: Superconducting sensors doped with rare isotopes have recently demonstrated powerful sensing performance for sub-keV radiation from nuclear decay. Here, we report the first high-resolution recoil spectroscopy of a single, selected nuclear state using superconducting tunnel junction (STJ) sensors. The STJ sensors were used to measure the eV-scale nuclear recoils produced in $^7$Be electron capture… ▽ More Superconducting sensors doped with rare isotopes have recently demonstrated powerful sensing performance for sub-keV radiation from nuclear decay. Here, we report the first high-resolution recoil spectroscopy of a single, selected nuclear state using superconducting tunnel junction (STJ) sensors. The STJ sensors were used to measure the eV-scale nuclear recoils produced in $^7$Be electron capture decay in coincidence with a 478 keV $γ$-ray emitted in decays to the lowest-lying excited nuclear state in $^7$Li. Details of the Doppler broadened recoil spectrum depend on the slow-down dynamics of the recoil ion. The measured spectral broadening is compared to empirical stopping power models as well as modern molecular dynamics simulations at low energy. The results have implications in several areas from nuclear structure and stopping powers at eV-scale energies to direct searches for dark matter, neutrino mass measurements, and other physics beyond the standard model. △ Less

Submitted 10 December, 2024; v1 submitted 11 November, 2024; originally announced November 2024.

FAIR Universe HiggsML Uncertainty Challenge Competition

Authors: Wahid Bhimji, Paolo Calafiura, Ragansu Chakkappai, Po-Wen Chang, Yuan-Tang Chou, Sascha Diefenbacher, Jordan Dudley, Steven Farrell, Aishik Ghosh, Isabelle Guyon, Chris Harris, Shih-Chieh Hsu, Elham E Khoda, Rémy Lyscar, Alexandre Michon, Benjamin Nachman, Peter Nugent, Mathis Reymond, David Rousseau, Benjamin Sluijter, Benjamin Thorne, Ihsan Ullah, Yulei Zhang

Abstract: The FAIR Universe -- HiggsML Uncertainty Challenge focuses on measuring the physics properties of elementary particles with imperfect simulators due to differences in modelling systematic errors. Additionally, the challenge is leveraging a large-compute-scale AI platform for sharing datasets, training models, and hosting machine learning competitions. Our challenge brings together the physics and… ▽ More The FAIR Universe -- HiggsML Uncertainty Challenge focuses on measuring the physics properties of elementary particles with imperfect simulators due to differences in modelling systematic errors. Additionally, the challenge is leveraging a large-compute-scale AI platform for sharing datasets, training models, and hosting machine learning competitions. Our challenge brings together the physics and machine learning communities to advance our understanding and methodologies in handling systematic (epistemic) uncertainties within AI techniques. △ Less

Submitted 18 December, 2024; v1 submitted 3 October, 2024; originally announced October 2024.

Comments: Whitepaper for the FAIR Universe HiggsML Uncertainty Challenge Competition, available : https://fair-universe.lbl.gov

Signal processing and spectral modeling for the BeEST experiment

Authors: Inwook Kim, Connor Bray, Andrew Marino, Caitlyn Stone-Whitehead, Amii Lamm, Ryan Abells, Pedro Amaro, Adrien Andoche, Robin Cantor, David Diercks, Spencer Fretwell, Abigail Gillespie, Mauro Guerra, Ad Hall, Cameron N. Harris, Jackson T. Harris, Calvin Hinkle, Leendert M. Hayen, Paul-Antoine Hervieux, Geon-Bo Kim, Kyle G. Leach, Annika Lennarz, Vincenzo Lordi, Jorge Machado, David McKeen , et al. (13 additional authors not shown)

Abstract: The Beryllium Electron capture in Superconducting Tunnel junctions (BeEST) experiment searches for evidence of heavy neutrino mass eigenstates in the nuclear electron capture decay of $^7$Be by precisely measuring the recoil energy of the $^7$Li daughter. In Phase-III, the BeEST experiment has been scaled from a single superconducting tunnel junction (STJ) sensor to a 36-pixel array to increase se… ▽ More The Beryllium Electron capture in Superconducting Tunnel junctions (BeEST) experiment searches for evidence of heavy neutrino mass eigenstates in the nuclear electron capture decay of $^7$Be by precisely measuring the recoil energy of the $^7$Li daughter. In Phase-III, the BeEST experiment has been scaled from a single superconducting tunnel junction (STJ) sensor to a 36-pixel array to increase sensitivity and mitigate gamma-induced backgrounds. Phase-III also uses a new continuous data acquisition system that greatly increases the flexibility for signal processing and data cleaning. We have developed procedures for signal processing and spectral fitting that are sufficiently robust to be automated for large data sets. This article presents the optimized procedures before unblinding the majority of the Phase-III data set to search for physics beyond the standard model. △ Less

Submitted 17 January, 2025; v1 submitted 27 September, 2024; originally announced September 2024.

Streaming Large-Scale Electron Microscopy Data to a Supercomputing Facility

Authors: Samuel S. Welborn, Chris Harris, Stephanie M. Ribet, Georgios Varnavides, Colin Ophus, Bjoern Enders, Peter Ercius

Abstract: Data management is a critical component of modern experimental workflows. As data generation rates increase, transferring data from acquisition servers to processing servers via conventional file-based methods is becoming increasingly impractical. The 4D Camera at the National Center for Electron Microscopy (NCEM) generates data at a nominal rate of 480 Gbit/s (87,000 frames/s) producing a 700 GB… ▽ More Data management is a critical component of modern experimental workflows. As data generation rates increase, transferring data from acquisition servers to processing servers via conventional file-based methods is becoming increasingly impractical. The 4D Camera at the National Center for Electron Microscopy (NCEM) generates data at a nominal rate of 480 Gbit/s (87,000 frames/s) producing a 700 GB dataset in fifteen seconds. To address the challenges associated with storing and processing such quantities of data, we developed a streaming workflow that utilizes a high-speed network to connect the 4D Camera's data acquisition (DAQ) system to supercomputing nodes at the National Energy Research Scientific Computing Center (NERSC), bypassing intermediate file storage entirely. In this work, we demonstrate the effectiveness of our streaming pipeline in a production setting through an hour-long experiment that generated over 10 TB of raw data, yielding high-quality datasets suitable for advanced analyses. Additionally, we compare the efficacy of this streaming workflow against the conventional file-transfer workflow by conducting a post-mortem analysis on historical data from experiments performed by real users. Our findings show that the streaming workflow significantly improves data turnaround time, enables real-time decision-making, and minimizes the potential for human error by eliminating manual user interactions. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Graph Neural Network-based Tracking as a Service

Authors: Haoran Zhao, Andrew Naylor, Shih-Chieh Hsu, Paolo Calafiura, Steven Farrell, Yongbing Feng, Philip Coleman Harris, Elham E Khoda, William Patrick Mccormack, Dylan Sheldon Rankin, Xiangyang Ju

Abstract: Recent studies have shown promising results for track finding in dense environments using Graph Neural Network (GNN)-based algorithms. However, GNN-based track finding is computationally slow on CPUs, necessitating the use of coprocessors to accelerate the inference time. Additionally, the large input graph size demands a large device memory for efficient computation, a requirement not met by all… ▽ More Recent studies have shown promising results for track finding in dense environments using Graph Neural Network (GNN)-based algorithms. However, GNN-based track finding is computationally slow on CPUs, necessitating the use of coprocessors to accelerate the inference time. Additionally, the large input graph size demands a large device memory for efficient computation, a requirement not met by all computing facilities used for particle physics experiments, particularly those lacking advanced GPUs. Furthermore, deploying the GNN-based track-finding algorithm in a production environment requires the installation of all dependent software packages, exclusively utilized by this algorithm. These computing challenges must be addressed for the successful implementation of GNN-based track-finding algorithm into production settings. In response, we introduce a ``GNN-based tracking as a service'' approach, incorporating a custom backend within the NVIDIA Triton inference server to facilitate GNN-based tracking. This paper presents the performance of this approach using the Perlmutter supercomputer at NERSC. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Comments: 7 pages, 4 figures, Proceeding of Connected the Dots Workshop (CTD 2023)

Report number: PROC-CTD2023-56

The Data Acquisition System for Phase-III of the BeEST Experiment

Authors: C. Bray, S. Fretwell, I. Kim, W. K. Warburton, F. Ponce, K. G. Leach, S. Friedrich, R. Abells, P. Amaro, A. Andoche, R. Cantor, D. Diercks, M. Guerra, A. Hall, C. Harris, J. Harris, L. Hayen, P. A. Hervieux, G. B. Kim, A. Lennarz, V. Lordi, J. Machado, P. Machule, A. Marino, D. McKeen , et al. (5 additional authors not shown)

Abstract: The BeEST experiment is a precision laboratory search for physics beyond the standard model that measures the electron capture decay of $^7$Be implanted into superconducting tunnel junction (STJ) detectors. For Phase-III of the experiment, we constructed a continuously sampling data acquisition system to extract pulse shape and timing information from 16 STJ pixels offline. Four additional pixels… ▽ More The BeEST experiment is a precision laboratory search for physics beyond the standard model that measures the electron capture decay of $^7$Be implanted into superconducting tunnel junction (STJ) detectors. For Phase-III of the experiment, we constructed a continuously sampling data acquisition system to extract pulse shape and timing information from 16 STJ pixels offline. Four additional pixels are read out with a fast list-mode digitizer, and one with a nuclear MCA already used in the earlier limit-setting phases of the experiment. We present the performance of the data acquisition system and discuss the relative advantages of the different digitizers. △ Less

Submitted 20 November, 2023; originally announced November 2023.

Comments: 8 pages, 4 figures, proceedings for The 20th International Conference on Low Temperature Detectors

Graphene-Quantum Dot Hybrid Photodetectors from 200 mm Wafer Scale Processing

Authors: Sha Li, Zhenxing Wang, Bianca Robertz, Daniel Neumaier, Oihana Txoperena, Arantxa Maestre, Amaia Zurutuza, Chris Bower, Ashley Rushton, Yinglin Liu, Chris Harris, Alexander Bessonov, Surama Malik, Mark Allen, Ivonne Medina-Salazar, Tapani Ryhänen, Max C. Lemme

Abstract: A 200 mm processing platform for the large-scale production of graphene field-effect transistor-quantum dot (GFET-QD) hybrid photodetectors is demonstrated. Comprehensive statistical analysis of electric data shows a high yield (96%) and low variation of the 200 mm scale fabrication. The GFET-QD devices deliver responsivities of 10${^5}$ - 10${^6}$ V/W in a wavelength range from 400 to 1800 nm, at… ▽ More A 200 mm processing platform for the large-scale production of graphene field-effect transistor-quantum dot (GFET-QD) hybrid photodetectors is demonstrated. Comprehensive statistical analysis of electric data shows a high yield (96%) and low variation of the 200 mm scale fabrication. The GFET-QD devices deliver responsivities of 10${^5}$ - 10${^6}$ V/W in a wavelength range from 400 to 1800 nm, at up to 100 frames per second. Spectral sensitivity compares well to that obtained using similar GFET-QD photodetectors. The device concept enables gate-tunable suppression or enhancement of the photovoltage, which may be exploited for electric shutter operation by toggling between the signal capture and shutter states. The devices show good stability at a wide operation range and external quantum efficiency of 20% in the short-wavelength infrared range. Furthermore, an integration solution with complementary metal-oxide-semiconductor technology is presented to realize image-sensor-array chips and a proof-of-concept image system. This work demonstrates the potential for the volume manufacture of infrared photodetectors for a wide range of imaging applications. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Comments: 29 pages

Journal ref: Sci Rep 15, 14706 (2025)

Terahertz pulse generation with binary phase control in non-linear InAs metasurface

Authors: Hyunseung Jung, Lucy L. Hale, Sylvain D. Gennaro, Jayson Briscoe, Prasad P. Iyer, Chloe F. Doiron, C. Thomas Harris, Ting Shan Luk, Sadhvikas J Addamane, John L. Reno, Igal Brener, Oleg Mitrofanov

Abstract: The effect of terahertz (THz) pulse generation has revolutionized broadband coherent spectroscopy and imaging at THz frequencies. However, THz pulses typically lack spatial structure, whereas structured beams are becoming essential for advanced spectroscopy applications. Non-linear optical metasurfaces with nanoscale THz emitters can provide a solution by defining the beam structure at the generat… ▽ More The effect of terahertz (THz) pulse generation has revolutionized broadband coherent spectroscopy and imaging at THz frequencies. However, THz pulses typically lack spatial structure, whereas structured beams are becoming essential for advanced spectroscopy applications. Non-linear optical metasurfaces with nanoscale THz emitters can provide a solution by defining the beam structure at the generation stage. We develop a non-linear InAs metasurface consisting of nanoscale optical resonators for simultaneous generation and structuring of THz beams. We find that THz pulse generation in the resonators is governed by optical rectification. It is more efficient than in ZnTe crystals, and it allows us to control the pulse polarity and amplitude, offering a platform for realizing binary-phase THz metasurfaces. To illustrate this capability, we demonstrate an InAs metalens, which simultaneously generates and focuses THz pulses. The control of spatiotemporal structure using nanoscale emitters opens doors for THz beam engineering and advanced spectroscopy and imaging applications. △ Less

Submitted 7 November, 2022; originally announced November 2022.

Comments: 22 pages, 5 figures

Revealing the interior structure of icy moons with a Bayesian approach to magnetic induction measurements

Authors: John B. Biersteker, Benjamin P. Weiss, Corey J. Cochrane, Camilla D. K. Harris, Xianzhe Jia, Krishan K. Khurana, Jiang Liu, Neil Murphy, Carol A. Raymond

Abstract: Some icy moons and small bodies in the solar system are believed to host subsurface liquid water oceans. The interaction of these saline, electrically conductive oceans with time-varying external magnetic fields generates induced magnetic fields. Magnetometry observations of these induced fields in turn enable the detection and characterization of these oceans. We present a framework for character… ▽ More Some icy moons and small bodies in the solar system are believed to host subsurface liquid water oceans. The interaction of these saline, electrically conductive oceans with time-varying external magnetic fields generates induced magnetic fields. Magnetometry observations of these induced fields in turn enable the detection and characterization of these oceans. We present a framework for characterizing the interiors of icy moons using multi-frequency induction and Bayesian inference applied to magnetometry measurements anticipated from the upcoming Europa Clipper mission. Using simulated data from the Europa Clipper Magnetometer (ECM), our approach can accurately retrieve a wide range of plausible internal structures for Europa. In particular, the ocean conductivity is recovered to within ${\pm}50\%$ for all internal structure scenarios considered and the ocean thickness can be retrieved to within ${\pm}25~\mathrm{km}$ for five out of seven scenarios. Characterization of the ice shell thickness to ${\pm}50\%$ is possible for six of seven scenarios. Our recovery of the ice shell thickness is highly contingent on accurate modeling of magnetic fields arising from the interaction of Europa with the ambient magnetospheric plasma, while the ocean thickness is more modestly affected and the ocean conductivity retrieval is largely unchanged. Furthermore, we find that the addition of a priori constraints (e.g., static gravity measurements) can yield improved ocean characterization compared to magnetometry alone, suggesting that multi-instrument techniques can play a key role in revealing the interiors of Europa and other ocean worlds. △ Less

Submitted 21 October, 2022; originally announced October 2022.

Comments: 18 pages, 16 figures, submitted to Planetary Science Journal

The Data Behind Dark Matter: Exploring Galactic Rotation

Authors: A. N. Villano, Kitty C. Harris, Judit Bergfalk, Raphael Hatami, Francis Vititoe, Julia Johnston

Abstract: Dark matter is estimated to make up ~84% of all normal/baryonic matter, but cannot be directly imaged. Despite the fact that dark matter cannot be directly observed yet, its influence on the motion of stars and gas in spiral galaxies have been detected. One way to show motion in galaxies are rotation curves that are plots of velocity measurements of how fast stars and gas move in a galaxy around t… ▽ More Dark matter is estimated to make up ~84% of all normal/baryonic matter, but cannot be directly imaged. Despite the fact that dark matter cannot be directly observed yet, its influence on the motion of stars and gas in spiral galaxies have been detected. One way to show motion in galaxies are rotation curves that are plots of velocity measurements of how fast stars and gas move in a galaxy around the center of mass. According to Newton's Law of Gravitation, the rotational velocity is an indication of the amount of visible and non-visible mass in the galaxy. Given that the visible matter is measurable using photometry, dark matter mass can therefore be estimated, offering an insight into the size distribution in galaxies. In order to gain a greater appreciation of the research scientists' findings about dark matter, their method should be easily reproduced by any curious individual. Our interactive workshop is an excellent educational tool to investigate how dark matter impacts the rotation of visible matter by providing a guide to produce galactic rotation curves. The Python-based notebooks are set up to walk you through the whole process of producing rotation curves using an online database (SPARC) and to allow you to learn about each component of the galaxy. The three steps of the rotation curve building process is plotting the measured velocity data, constructing the rotation curves for each component, and fitting the total velocity to the measured values. △ Less

Submitted 8 August, 2023; v1 submitted 17 June, 2022; originally announced July 2022.

Comments: 6 pages, 1 table

Journal ref: Journal of Open Source Education (2023), 6(66), 184

Strategy for Understanding the Higgs Physics: The Cool Copper Collider

Authors: Sridhara Dasu, Emilio A. Nanni, Michael E. Peskin, Caterina Vernieri, Tim Barklow, Rainer Bartoldus, Pushpalatha C. Bhat, Kevin Black, Jim Brau, Martin Breidenbach, Nathaniel Craig, Dmitri Denisov, Lindsey Gray, Philip C. Harris, Michael Kagan, Zhen Liu, Patrick Meade, Nathan Majernik, Sergei Nagaitsev, Isobel Ojalvo, Christoph Paus, Carl Schroeder, Ariel G. Schwartzman, Jan Strube, Su Dong , et al. (4 additional authors not shown)

Abstract: A program to build a lepton-collider Higgs factory, to precisely measure the couplings of the Higgs boson to other particles, followed by a higher energy run to establish the Higgs self-coupling and expand the new physics reach, is widely recognized as a primary focus of modern particle physics. We propose a strategy that focuses on a new technology and preliminary estimates suggest that can lead… ▽ More A program to build a lepton-collider Higgs factory, to precisely measure the couplings of the Higgs boson to other particles, followed by a higher energy run to establish the Higgs self-coupling and expand the new physics reach, is widely recognized as a primary focus of modern particle physics. We propose a strategy that focuses on a new technology and preliminary estimates suggest that can lead to a compact, affordable machine. New technology investigations will provide much needed enthusiasm for our field, resulting in trained workforce. This cost-effective, compact design, with technologies useful for a broad range of other accelerator applications, could be realized as a project in the US. Its technology innovations, both in the accelerator and the detector, will offer unique and exciting opportunities to young scientists. Moreover, cost effective compact designs, broadly applicable to other fields of research, are more likely to obtain financial support from our funding agencies. △ Less

Submitted 7 June, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

Comments: 11 pages, 2 figures, contribution to Snowmass 2021

Report number: SLAC-PUB-17661

Towards Deterministic Creation of Single Photon Sources in Diamond using In-Situ Ion Counting

Authors: M. Titze, H. Byeon, A. R. Flores, J. Henshaw, C. T. Harris, A. M. Mounce, E. S. Bielejec

Abstract: We present an in-situ counted ion implantation experiment reducing the error on the ion number to 5 % enabling the fabrication of high-yield single photon emitter devices in wide bandgap semiconductors for quantum applications. Typical focused ion beam implantation relies on knowing the beam current and setting a pulse length of the ion pulse to define the number of ions implanted at each location… ▽ More We present an in-situ counted ion implantation experiment reducing the error on the ion number to 5 % enabling the fabrication of high-yield single photon emitter devices in wide bandgap semiconductors for quantum applications. Typical focused ion beam implantation relies on knowing the beam current and setting a pulse length of the ion pulse to define the number of ions implanted at each location, referred to as timed implantation in this paper. This process is dominated by Poisson statistics resulting in large errors for low number of implanted ions. Instead, we use in-situ detection to measure the number of ions arriving at the substrate resulting in a two-fold reduction in the error on the number of implanted ions used to generate a single optically active silicon vacancy (SiV) defect in diamond compared to timed implantation. Additionally, through post-implantation analysis, we can further reduce the error resulting in a seven-fold improvement compared to timed implantation, allowing us to better estimate the conversion yield of implanted Si to SiV. We detect SiV emitters by photoluminescence spectroscopy, determine the number of emitters per location and calculate the yield to be 2.98 + 0.21 / - 0.24 %. Candidates for single photon emitters are investigated further by Hanbury-Brown-Twiss interferometry confirming that 82 % of the locations exhibit single photon emission statistics. This counted ion implantation technique paves the way towards deterministic creation of SiV when ion counting is used in combination with methods that improve the activation yield of SiV. △ Less

Submitted 3 December, 2021; originally announced December 2021.

Comments: 22 pages, 5 figures

HL-LHC Computing Review: Common Tools and Community Software

Authors: HEP Software Foundation, :, Thea Aarrestad, Simone Amoroso, Markus Julian Atkinson, Joshua Bendavid, Tommaso Boccali, Andrea Bocci, Andy Buckley, Matteo Cacciari, Paolo Calafiura, Philippe Canal, Federico Carminati, Taylor Childers, Vitaliano Ciulli, Gloria Corti, Davide Costanzo, Justin Gage Dezoort, Caterina Doglioni, Javier Mauricio Duarte, Agnieszka Dziurda, Peter Elmer, Markus Elsing, V. Daniel Elvira, Giulio Eulisse , et al. (85 additional authors not shown)

Abstract: Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this doc… ▽ More Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this document we address the issues for software that is used in multiple experiments (usually even more widely than ATLAS and CMS) and maintained by teams of developers who are either not linked to a particular experiment or who contribute to common software within the context of their experiment activity. We also give space to general considerations for future software and projects that tackle upcoming challenges, no matter who writes it, which is an area where community convergence on best practice is extremely useful. △ Less

Submitted 31 August, 2020; originally announced August 2020.

Comments: 40 pages contribution to Snowmass 2021

Report number: HSF-DOC-2020-01

A genetic algorithm approach to reconstructing spectral content from filtered x-ray diode array spectrometers

Authors: G. E. Kemp, M. S. Rubery, C. D. Harris, M. J. May, K. Widmann, R. F. Heeter, S. B. Libby, M. B. Schneider, B. E. Blue

Abstract: Filtered diode array spectrometers are routinely employed to infer the temporal evolution of spectral power from x-ray sources, but uniquely extracting spectral content from a finite set of broad, spectrally overlapping channel spectral sensitivities is decidedly nontrivial in these underdetermined systems. We present the use of genetic algorithms to reconstruct a probabilistic spectral intensity… ▽ More Filtered diode array spectrometers are routinely employed to infer the temporal evolution of spectral power from x-ray sources, but uniquely extracting spectral content from a finite set of broad, spectrally overlapping channel spectral sensitivities is decidedly nontrivial in these underdetermined systems. We present the use of genetic algorithms to reconstruct a probabilistic spectral intensity distribution and compare to the traditional approach most commonly found in literature. Unlike many of the previously published models, spectral reconstructions from this approach are neither limited by basis functional forms, nor do they require a priori spectral knowledge. While the original intent of such measurements was to diagnose the temporal evolution of spectral power from quasi-blackbody radiation sources, where the exact details of spectral content was not thought to be crucial, we demonstrate that this new technique can greatly enhance the utility of the diagnostic by providing more physical spectra and improved robustness to hardware configuration for even strongly non-Planckian distributions. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Evolving Antennas for Ultra-High Energy Neutrino Detection

Authors: Julie Rolla, Amy Connolly, Kai Staats, Stephanie Wissel, Dean Arakaki, Ian Best, Adam Blenk, Brian Clark, Maximillian Clowdus, Suren Gourapura, Corey Harris, Hannah Hasan, Luke Letwin, David Liu, Carl Pfendner, Jordan Potter, Cade Sbrocco, Tom Sinha, Jacob Trevithick

Abstract: Evolutionary algorithms borrow from biology the concepts of mutation and selection in order to evolve optimized solutions to known problems. The GENETIS collaboration is developing genetic algorithms for designing antennas that are more sensitive to ultra-high energy neutrino induced radio pulses than current designs. There are three aspects of this investigation. The first is to evolve simple wir… ▽ More Evolutionary algorithms borrow from biology the concepts of mutation and selection in order to evolve optimized solutions to known problems. The GENETIS collaboration is developing genetic algorithms for designing antennas that are more sensitive to ultra-high energy neutrino induced radio pulses than current designs. There are three aspects of this investigation. The first is to evolve simple wire antennas to test the concept and different algorithms. Second, optimized antenna response patterns are evolved for a given array geometry. Finally, antennas themselves are evolved using neutrino sensitivity as a measure of fitness. This is achieved by integrating the XFdtd finite-difference time-domain modeling program with simulations of neutrino experiments. △ Less

Submitted 15 May, 2020; originally announced May 2020.

Comments: 8 pages including references, 6 figures, presented at 36th International Cosmic Ray Conference (ICRC 2019)

SciPy 1.0--Fundamental Algorithms for Scientific Computing in Python

Authors: Pauli Virtanen, Ralf Gommers, Travis E. Oliphant, Matt Haberland, Tyler Reddy, David Cournapeau, Evgeni Burovski, Pearu Peterson, Warren Weckesser, Jonathan Bright, Stéfan J. van der Walt, Matthew Brett, Joshua Wilson, K. Jarrod Millman, Nikolay Mayorov, Andrew R. J. Nelson, Eric Jones, Robert Kern, Eric Larson, CJ Carey, İlhan Polat, Yu Feng, Eric W. Moore, Jake VanderPlas, Denis Laxalde , et al. (10 additional authors not shown)

Abstract: SciPy is an open source scientific computing library for the Python programming language. SciPy 1.0 was released in late 2017, about 16 years after the original version 0.1 release. SciPy has become a de facto standard for leveraging scientific algorithms in the Python programming language, with more than 600 unique code contributors, thousands of dependent packages, over 100,000 dependent reposit… ▽ More SciPy is an open source scientific computing library for the Python programming language. SciPy 1.0 was released in late 2017, about 16 years after the original version 0.1 release. SciPy has become a de facto standard for leveraging scientific algorithms in the Python programming language, with more than 600 unique code contributors, thousands of dependent packages, over 100,000 dependent repositories, and millions of downloads per year. This includes usage of SciPy in almost half of all machine learning projects on GitHub, and usage by high profile projects including LIGO gravitational wave analysis and creation of the first-ever image of a black hole (M87). The library includes functionality spanning clustering, Fourier transforms, integration, interpolation, file I/O, linear algebra, image processing, orthogonal distance regression, minimization algorithms, signal processing, sparse matrix handling, computational geometry, and statistics. In this work, we provide an overview of the capabilities and development practices of the SciPy library and highlight some recent technical developments. △ Less

Submitted 23 July, 2019; originally announced July 2019.

Comments: Article source data is available here: https://github.com/scipy/scipy-articles

Journal ref: Nature Methods 17, 261 (2020)

nEDM experiment at PSI: data-taking strategy and sensitivity of the dataset

Authors: C. Abel, N. J. Ayres, G. Ban, G. Bison, K. Bodek, V. Bondar, E. Chanel, P. -J. Chiu, M. Daum, S. Emmenegger, L. Ferraris-Bouchez, P. Flaux, W. C. Griffith P. G. Harris, N. Hild, Y. Kermaidic, K. Kirch, P. A. Koss, J. Krempel, B. Lauss, T. Lefort, Y. Lemiere, A. Leredde, P. Mohanmurthy, M. Musgrave, O. Naviliat-Cuncic , et al. (18 additional authors not shown)

Abstract: We report on the strategy used to optimize the sensitivity of our search for a neutron electric dipole moment at the Paul Scherrer Institute. Measurements were made upon ultracold neutrons stored within a single chamber at the heart of our apparatus. A mercury cohabiting magnetometer together with an array of cesium magnetometers were used to monitor the magnetic field, which was controlled and sh… ▽ More We report on the strategy used to optimize the sensitivity of our search for a neutron electric dipole moment at the Paul Scherrer Institute. Measurements were made upon ultracold neutrons stored within a single chamber at the heart of our apparatus. A mercury cohabiting magnetometer together with an array of cesium magnetometers were used to monitor the magnetic field, which was controlled and shaped by a series of precision field coils. In addition to details of the setup itself, we describe the chosen path to realize an appropriate balance between achieving the highest statistical sensitivity alongside the necessary control on systematic effects. The resulting irreducible sensitivity is better than 1*10-26 ecm. This contribution summarizes in a single coherent picture the results of the most recent publications of the collaboration. △ Less

Submitted 9 November, 2018; originally announced November 2018.

Comments: Submitted as a web of conference proceedings paper for PPNS2018

Time-resolved Absorptance and Melt Pool Dynamics during Intense Laser Irradiation of Metal

Authors: Brian J. Simonds, Jeffrey Sowards, Josh Hadler, Erik Pfeif, Boris Wilthan, Jack Tanner, Chandler Harris, Paul Williams, John Lehman

Abstract: High irradiance lasers incident on metal surfaces create a complex, dynamic process through which the metal can rapidly change from highly reflective to strongly absorbing. Absolute knowledge of this process underpins important industrial laser processes like laser welding, cutting, and metal additive manufacturing. Determining the time-dependent absorptance of the laser light by a material is imp… ▽ More High irradiance lasers incident on metal surfaces create a complex, dynamic process through which the metal can rapidly change from highly reflective to strongly absorbing. Absolute knowledge of this process underpins important industrial laser processes like laser welding, cutting, and metal additive manufacturing. Determining the time-dependent absorptance of the laser light by a material is important, not only for gaining a fundamental understanding of the light-matter interaction, but also for improving process design in manufacturing. Measurements of the dynamic optical absorptance are notoriously difficult due to the rapidly changing nature of the absorbing medium. This data is also of vital importance to process modelers whose complex simulations need reliable, accurate input data; yet, there is very little available. In this work, we measure the time-dependent, reflected light during a 10 ms laser spot weld using an integrating sphere apparatus. From this, we calculate the dynamic absorptance for 1070 nm wavelength light incident on 316L stainless steel. The time resolution of our experiment (< 1 us) allows for the determination of the precise conditions under which several important physical phenomena occur, such as melt and keyhole formation. The average absorptances determined optically were compared to calorimetrically-determined values, and it was found that the calorimeter severely underestimated the absorbed energy due to mass lost during the spot weld. Weld nugget cross-sections are also presented in order to verify our interpretation of the optical results, as well as provide experimental data for weld model validation. △ Less

Submitted 11 September, 2018; originally announced September 2018.

Comments: 21 pages, 10 figures, 4 tables, 48 references

Journal ref: Phys. Rev. Applied 10, 044061 (2018)

Nonlinear characterisation of a silicon integrated Bragg waveguide filter

Authors: Micol Previde Massara, Matteo Menotti, Nicola Bergamasco, Nicholas C. Harris, Tom Baehr-Jones, Michael Hochberg, Christophe Galland, Marco Liscidini, Matteo Galli, Daniele Bajoni

Abstract: Bragg waveguides are promising optical filters for pump suppression in spontaneous Four-Wave Mixing (FWM) photon sources. In this work, we investigate the generation of unwanted photon pairs in the filter itself. We do this by taking advantage of the relation between spontaneous and classical FWM, which allows for the precise characterisation of the nonlinear response of the device. The pair gener… ▽ More Bragg waveguides are promising optical filters for pump suppression in spontaneous Four-Wave Mixing (FWM) photon sources. In this work, we investigate the generation of unwanted photon pairs in the filter itself. We do this by taking advantage of the relation between spontaneous and classical FWM, which allows for the precise characterisation of the nonlinear response of the device. The pair generation rate estimated from the classical measurement is compared with the theoretical value calculated by means of a full quantum model of the filter, which also allows to investigate the spectral properties of the generated pairs. We find a good agreement between theory and experiment, confirming that stimulated FWM is a valuable approach to characterise the nonlinear response of an integrated filter, and that the pairs generated in a Bragg waveguide are not a serious issue for the operation of a fully integrated nonclassical source. △ Less

Submitted 15 February, 2018; originally announced February 2018.

Deep Learning with Coherent Nanophotonic Circuits

Authors: Yichen Shen, Nicholas C. Harris, Scott Skirlo, Mihika Prabhu, Tom Baehr-Jones, Michael Hochberg, Xin Sun, Shijie Zhao, Hugo Larochelle, Dirk Englund, Marin Soljacic

Abstract: Artificial Neural Networks are computational network models inspired by signal processing in the brain. These models have dramatically improved the performance of many learning tasks, including speech and object recognition. However, today's computing hardware is inefficient at implementing neural networks, in large part because much of it was designed for von Neumann computing schemes. Significan… ▽ More Artificial Neural Networks are computational network models inspired by signal processing in the brain. These models have dramatically improved the performance of many learning tasks, including speech and object recognition. However, today's computing hardware is inefficient at implementing neural networks, in large part because much of it was designed for von Neumann computing schemes. Significant effort has been made to develop electronic architectures tuned to implement artificial neural networks that improve upon both computational speed and energy efficiency. Here, we propose a new architecture for a fully-optical neural network that, using unique advantages of optics, promises a computational speed enhancement of at least two orders of magnitude over the state-of-the-art and three orders of magnitude in power efficiency for conventional learning tasks. We experimentally demonstrate essential parts of our architecture using a programmable nanophotonic processor. △ Less

Submitted 7 October, 2016; originally announced October 2016.

Comments: 8 pages, 3 figures

Energy correlations of photon pairs generated by a silicon microring resonator probed by Stimulated Four Wave Mixing

Authors: Davide Grassani, Angelica Simbula, Stefano Pirotta, Matteo Galli, Matteo Menotti, Nicholas C. Harris, Tom Baehr-Jones, Michael Hochberg, Christophe Galland, Marco Liscidini, Daniele Bajoni

Abstract: Compact silicon integrated devices, such as micro-ring resonators, have recently been demonstrated as efficient sources of quantum correlated photon pairs. The mass production of integrated devices demands the implementation of fast and reliable techniques to monitor the device performances. In the case of time-energy correlations, this is particularly challenging, as it requires high spectral res… ▽ More Compact silicon integrated devices, such as micro-ring resonators, have recently been demonstrated as efficient sources of quantum correlated photon pairs. The mass production of integrated devices demands the implementation of fast and reliable techniques to monitor the device performances. In the case of time-energy correlations, this is particularly challenging, as it requires high spectral resolution that is not currently achievable in coincidence measurements. Here we reconstruct the joint spectral density of photons pairs generated by spontaneous four-wave mixing in a silicon ring resonator by studying the corresponding stimulated process, namely stimulated four wave mixing. We show that this approach, featuring high spectral resolution and short measurement times, allows one to discriminate between nearly-uncorrelated and highly-correlated photon pairs. △ Less

Submitted 16 February, 2016; originally announced February 2016.

Comments: 7 pages, 4 figures

Quantum transport simulations in a programmable nanophotonic processor

Authors: Nicholas C. Harris, Gregory R. Steinbrecher, Jacob Mower, Yoav Lahini, Mihika Prabhu, Darius Bunandar, Changchen Chen, Franco N. C. Wong, Tom Baehr-Jones, Michael Hochberg, Seth Lloyd, Dirk Englund

Abstract: Environmental noise and disorder play critical roles in quantum particle and wave transport in complex media, including solid-state and biological systems. Recent work has predicted that coupling between noisy environments and disordered systems, in which coherent transport has been arrested due to localization effects, could actually enhance transport. Photonic integrated circuits are promising p… ▽ More Environmental noise and disorder play critical roles in quantum particle and wave transport in complex media, including solid-state and biological systems. Recent work has predicted that coupling between noisy environments and disordered systems, in which coherent transport has been arrested due to localization effects, could actually enhance transport. Photonic integrated circuits are promising platforms for studying such effects, with a central goal being the development of large systems providing low-loss, high-fidelity control over all parameters of the transport problem. Here, we fully map the role of disorder in quantum transport using a nanophotonic processor consisting of a mesh of 88 generalized beamsplitters programmable on microsecond timescales. Over 64,400 transport experiments, we observe several distinct transport regimes, including environment-assisted quantum transport and the ''quantum Goldilocks'' regime in strong, statically disordered discrete-time systems. Low loss and high-fidelity programmable transformations make this nanophotonic processor a promising platform for many-boson quantum simulation experiments. △ Less

Submitted 28 January, 2020; v1 submitted 13 July, 2015; originally announced July 2015.

Comments: 4 figures, 8 pages

Efficient, Compact and Low Loss Thermo-Optic Phase Shifter in Silicon

Authors: Nicholas C. Harris, Yangjin Ma, Jacob Mower, Tom Baehr-Jones, Dirk Englund, Michael Hochberg, Christophe Galland

Abstract: We design a resistive heater optimized for efficient and low-loss optical phase modulation in a silicon-on-insulator (SOI) waveguide and characterize the fabricated devices. Modulation is achieved by flowing current perpendicular to a new ridge waveguide geometry. The resistance profile is engineered using different dopant concentrations to obtain localized heat generation and maximize the overlap… ▽ More We design a resistive heater optimized for efficient and low-loss optical phase modulation in a silicon-on-insulator (SOI) waveguide and characterize the fabricated devices. Modulation is achieved by flowing current perpendicular to a new ridge waveguide geometry. The resistance profile is engineered using different dopant concentrations to obtain localized heat generation and maximize the overlap between the optical mode and the high temperature regions, while simultaneously minimizing optical loss due to free-carrier absorption. A 61.6 micrometer-long phase shifter was fabricated in a CMOS process with oxide cladding and two metal layers. The device features a phase-shifting efficiency of 24.77 +/- 0.43 mW/pi and a -3 dB modulation bandwidth of 130.0 +/- 5.59 kHz. The insertion loss measured for 21 devices across an 8-inch wafer was only 0.23 +/- 0.13 dB. Considering the prospect of densely integrated photonic circuits, we also quantify the separation necessary to isolate thermo-optic devices in the standard 220 nm SOI platform. △ Less

Submitted 14 October, 2014; originally announced October 2014.

Comments: This paper was published in Optics Express and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://dx.doi.org/10.1364/OE.22.010487. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law

Journal ref: Optics Express, Vol. 22, Issue 9, pp. 10487-10493 (2014)

An integrated source of spectrally filtered correlated photons for large scale quantum photonic systems

Authors: Nicholas C. Harris, Davide Grassani, Angelica Simbula, Mihir Pant, Matteo Galli, Tom Baehr-Jones, Michael Hochberg, Dirk Englund, Daniele Bajoni, Christophe Galland

Abstract: We demonstrate the generation of quantum-correlated photon-pairs combined with the spectral filtering of the pump field by more than 95dB using Bragg reflectors and electrically tunable ring resonators. Moreover, we perform demultiplexing and routing of signal and idler photons after transferring them via a fiber to a second identical chip. Non-classical two-photon temporal correlations with a coi… ▽ More We demonstrate the generation of quantum-correlated photon-pairs combined with the spectral filtering of the pump field by more than 95dB using Bragg reflectors and electrically tunable ring resonators. Moreover, we perform demultiplexing and routing of signal and idler photons after transferring them via a fiber to a second identical chip. Non-classical two-photon temporal correlations with a coincidence-to-accidental ratio of 50 are measured without further off-chip filtering. Our system, fabricated with high yield and reproducibility in a CMOS process, paves the way toward truly large-scale quantum photonic circuits by allowing sources and detectors of single photons to be integrated on the same chip. △ Less

Submitted 29 September, 2014; originally announced September 2014.

Comments: 4 figures

Journal ref: Phys. Rev. X 4, 041047, 2014

Broadband on-chip optical non-reciprocity using phase modulators

Authors: Christophe Galland, Ran Ding, Nicholas C Harris, Tom Baehr-Jones, Michael Hochberg

Abstract: Breaking the reciprocity of light propagation in photonic integrated circuits (PIC) - especially in the CMOS-compatible silicon-on-insulator platform - is a topic of intense research. However, a practical solution for monolithic integrating of optical isolators and circulators remains elusive. Here, we propose and analyze a new non-reciprocal photonic architecture operating with standard single-mo… ▽ More Breaking the reciprocity of light propagation in photonic integrated circuits (PIC) - especially in the CMOS-compatible silicon-on-insulator platform - is a topic of intense research. However, a practical solution for monolithic integrating of optical isolators and circulators remains elusive. Here, we propose and analyze a new non-reciprocal photonic architecture operating with standard single-mode waveguides (or optical fibers). Our design exploits cascaded phase modulators separated by optical delay lines and suitably driven by time shifted waveforms. Because it is based on fully balanced interferometers and does not involve resonant structures, our scheme is also intrinsically broadband. Using realistic parameters we calculate an extinction ratio superior to 20 dB and insertion loss below -3 dB. △ Less

Submitted 6 May, 2014; originally announced May 2014.

Comments: 11 pages, 5 figures

Journal ref: Optics express (2013) Volume 21 Issue 12 Pages 14500-14511

Critical Test of Simulations of Charge-Exchange-Induced X-Ray Emission in the Solar System

Authors: R. Ali, P. A. Neill, P. Beiersdorfer, C. L. Harris, D. R. Schultz, P. C. Stancil

Abstract: Experimental and theoretical state-selective X-ray spectra resulting from single-electron capture in charge exchange (CX) collisions of Ne^10+ with He, Ne, and Ar are presented for a collision velocity of 933 km s^-1 (4.54 keV nucleon^-1), comparable to the highest velocity components of the fast solar wind. The experimental spectra were obtained by detecting scattered projectiles, target recoil… ▽ More Experimental and theoretical state-selective X-ray spectra resulting from single-electron capture in charge exchange (CX) collisions of Ne^10+ with He, Ne, and Ar are presented for a collision velocity of 933 km s^-1 (4.54 keV nucleon^-1), comparable to the highest velocity components of the fast solar wind. The experimental spectra were obtained by detecting scattered projectiles, target recoil ions, and X-rays in coincidence; with simultaneous determination of the recoil ion momenta. Use and interpretation of these spectra are free from the complications of non-coincident total X-ray measurements that do not differentiate between the primary reaction channels. The spectra offer the opportunity to test critically the ability of CX theories to describe such interactions at the quantum orbital angular momentum level of the final projectile ion. To this end, new classical trajectory Monte Carlo calculations are compared here with the measurements. The current work demonstrates that modeling of cometary, heliospheric, planetary, and laboratory X-ray emission based on approximate state-selective CX models may result in erroneous conclusions and deductions of relevant parameters. △ Less

Submitted 14 May, 2010; originally announced May 2010.

Comments: 4 figures

From Data to Probability Densities without Histograms

Authors: Bernd A. Berg, Robert C. Harris

Abstract: When one deals with data drawn from continuous variables, a histogram is often inadequate to display their probability density. It deals inefficiently with statistical noise, and binsizes are free parameters. In contrast to that, the empirical cumulative distribution function (obtained after sorting the data) is parameter free. But it is a step function, so that its differentiation does not give… ▽ More When one deals with data drawn from continuous variables, a histogram is often inadequate to display their probability density. It deals inefficiently with statistical noise, and binsizes are free parameters. In contrast to that, the empirical cumulative distribution function (obtained after sorting the data) is parameter free. But it is a step function, so that its differentiation does not give a smooth probability density. Based on Fourier series expansion and Kolmogorov tests, we introduce a simple method, which overcomes this problem. Error bars on the estimated probability density are calculated using a jackknife method. We give several examples and provide computer code reproducing them. You may want to look at the corresponding figures 4 to 9 first. △ Less

Submitted 22 December, 2007; originally announced December 2007.

Comments: 9 pages, 9 figures

Journal ref: Comp. Phys. Commun. 179 (2008) 443-448

Defects Can Increase the Melting Temperature of DNA-Nanoparticle Assemblies

Authors: Nolan C. Harris, Ching-Hwa Kiang

Abstract: DNA-gold nanoparticle assemblies have shown promise as an alternative technology to DNA microarrays for DNA detection and RNA profiling. Understanding the effect of DNA sequences on the melting temperature of the system is central to developing reliable detection technology. We studied the effects of DNA base-pairing defects, such as mismatches and deletions, on the melting temperature of DNA-na… ▽ More DNA-gold nanoparticle assemblies have shown promise as an alternative technology to DNA microarrays for DNA detection and RNA profiling. Understanding the effect of DNA sequences on the melting temperature of the system is central to developing reliable detection technology. We studied the effects of DNA base-pairing defects, such as mismatches and deletions, on the melting temperature of DNA-nanoparticle assemblies. We found that, contrary to the general assumption that defects lower the melting temperature of DNA, some defects increase the melting temperature of DNA-linked nanoparticle assemblies. The effects of mismatches and deletions were found to depend on the specific base pair, the sequence, and the location of the defects. Our results demonstrate that the surface-bound DNA exhibit hybridization behavior different from that of free DNA. Such findings indicate that a detailed understanding of DNA-nanoparticle assembly phase behavior is required for quantitative interpretation of DNA-nanoparticle aggregation. △ Less

Submitted 5 July, 2007; originally announced July 2007.

Comments: 12 pages, 3 figures

Journal ref: J. Phys. Chem. B, 110 (2006) 16393-16396

Experimental Free Energy Surface Reconstruction From Single-Molecule Force Spectroscopy Using Jarzynski's Equality

Authors: Nolan C. Harris, Yang Song, Ching-Hwa Kiang

Abstract: We used the atomic force microscope to manipulate and unfold individual molecules of the titin I27 domain and reconstructed its free energy surface using Jarzynski's equality. The free energy surface for both stretching and unfolding was reconstructed using an exact formula that relates the nonequilibrium work fluctuations to the molecular free energy. In addition, the unfolding free energy barr… ▽ More We used the atomic force microscope to manipulate and unfold individual molecules of the titin I27 domain and reconstructed its free energy surface using Jarzynski's equality. The free energy surface for both stretching and unfolding was reconstructed using an exact formula that relates the nonequilibrium work fluctuations to the molecular free energy. In addition, the unfolding free energy barrier, i.e. the activation energy, was directly obtained from experimental data for the first time. This work demonstrates that Jarzynski's equality can be used to analyze nonequilibrium single-molecule experiments, and to obtain the free energy surfaces for molecular systems, including interactions for which only nonequilibrium work can be measured. △ Less

Submitted 3 July, 2007; originally announced July 2007.

Comments: 4 pages, 3 figures. Phys. Rev. Lett. (2007) accepted

Disorder in DNA-Linked Gold Nanoparticle Assemblies

Authors: Nolan C. Harris, Ching-Hwa Kiang

Abstract: We report experimental observations on the effect of disorder on the phase behavior of DNA-linked nanoparticle assemblies. Variation in DNA linker lengths results in different melting temperatures of the DNA-linked nanoparticle assemblies. We observed an unusual trend of a non-monotonic ``zigzag'' pattern in the melting temperature as a function of DNAlinker length. Linker DNA resulting in unequ… ▽ More We report experimental observations on the effect of disorder on the phase behavior of DNA-linked nanoparticle assemblies. Variation in DNA linker lengths results in different melting temperatures of the DNA-linked nanoparticle assemblies. We observed an unusual trend of a non-monotonic ``zigzag'' pattern in the melting temperature as a function of DNAlinker length. Linker DNA resulting in unequal DNA duplex lengths introduces disorder and lowers the melting temperature of the nanoparticle system. Comparison with free DNA thermodynamics shows that such an anomalous zigzag pattern does not exist for free DNA duplex melting, which suggests that the disorder introduced by unequal DNA duplex lengths results in this unusual collective behavior of DNA-linked nanoparticle assemblies. △ Less

Submitted 2 July, 2005; originally announced July 2005.

Comments: 4 pages, 4 figures, Phys.Rev.Lett. (2005), to appear

The Reversible Phase Transition of DNA-Linked Colloidal Gold Assemblies

Authors: Young Sun, Nolan C. Harris, Ching-Hwa Kiang

Abstract: We present direct evidence for a reversible phase transition of DNA-linked colloidal gold assemblies. Transmission electron microscopy and optical absorption spectroscopy are used to monitor the colloidal gold phase transition, whose behavior is dominated by DNA interactions. We use single-stranded DNA-capped colloidal gold that is linked by complementary linker DNA to form the assemblies. We fo… ▽ More We present direct evidence for a reversible phase transition of DNA-linked colloidal gold assemblies. Transmission electron microscopy and optical absorption spectroscopy are used to monitor the colloidal gold phase transition, whose behavior is dominated by DNA interactions. We use single-stranded DNA-capped colloidal gold that is linked by complementary linker DNA to form the assemblies. We found that, compared to free DNA, a sharp melting transition is observed for the DNA-linked colloidal gold assemblies. The structure of the assemblies is non-crystalline, much like a gel phase, consistent with theoretical predictions. Optical spectra and melting curves provide additional evidence of gelation of the colloidal system. The phase transition and separation are examples of percolation in a dilute solvent. △ Less

Submitted 21 April, 2005; v1 submitted 8 April, 2005; originally announced April 2005.

Comments: 9 pages, 6 figures, Physica A (2005) to appear. Updated figures

Journal ref: Physica A, 354 (2005) 1-9.

Melting Transition of Directly-Linked Gold Nanoparticle DNA Assembly

Authors: Y. Sun, N. C. Harris, C. -H. Kiang

Abstract: DNA melting and hybridization is a fundamental biological process as well as a crucial step in many modern biotechnology applications. DNA confined on surfaces exhibits different behavior from that in free solutions. The system of DNA-capped gold nanoparticles exhibits unique phase transitions and represents a new class of complex fluids. Depending on the sequence of the DNA, particles can be li… ▽ More DNA melting and hybridization is a fundamental biological process as well as a crucial step in many modern biotechnology applications. DNA confined on surfaces exhibits different behavior from that in free solutions. The system of DNA-capped gold nanoparticles exhibits unique phase transitions and represents a new class of complex fluids. Depending on the sequence of the DNA, particles can be linked to each other through direct complementary DNA sequences or via a ``linker'' DNA whose sequence is complementary to the sequence attached to the gold nanoparticles. We observed different melting transitions for these two distinct systems. △ Less

Submitted 10 March, 2005; originally announced March 2005.

Comments: 6 pages, 4 figures, Physica A (2005) to appear

Journal ref: Physica A, 350 (2005) 89-94