-
Identification of structures driving trailing-edge noise. Part II -- Numerical investigation
Authors:
Zhenyang Yuan,
Simon Demange,
Kilian Oberleithner,
André V. G. Cavalieri,
Ardeshir Hanifi
Abstract:
The aim of the present work is to investigate the mechanisms of broadband trailing-edge noise generation to improve prediction tools and control strategies. We focus on a NACA 0012 airfoil at 3 degrees angle of attack and chord Reynolds number Re = 200,000. A high-fidelity wall-resolved compressible implicit large eddy simulation (LES) is performed to collect data for our analysis. The simulation…
▽ More
The aim of the present work is to investigate the mechanisms of broadband trailing-edge noise generation to improve prediction tools and control strategies. We focus on a NACA 0012 airfoil at 3 degrees angle of attack and chord Reynolds number Re = 200,000. A high-fidelity wall-resolved compressible implicit large eddy simulation (LES) is performed to collect data for our analysis. The simulation is designed in close alignment with the experiment described in detail in the companion paper (Demange et al. 2024b). Zig-zag geometrical tripping elements, added to generate a turbulent boundary layer, are meshed to closely follow the experimental setup. A large spanwise domain is used in the simulation to include propagative acoustic waves with low wavenumbers. An in-depth comparison with experiments is conducted showing good agreement in terms of mean flow statistics, acoustic and hydrodynamic spectra, and coherence lengths. Furthermore, a strong correlation is found between the radiated acoustics and spanwise-coherent structures. To investigate the correlation for higher wavenumbers, spectral proper orthogonal decomposition (SPOD) is applied to the spanwise Fourier-transformed LES dataset. The analysis of all SPOD modes for the leading spanwise wavenumbers reveals streamwise-travelling wavepackets as the source of the radiated acoustics. This finding, confirming observations from experiments in the companion paper, leads to a new understanding of the turbulent structures driving the trailing-edge noise. By performing extended SPOD based on the acoustic region, we confirm the low rank nature of the acoustics, and a reduced-order model based on acoustic extended SPOD is proposed for the far-field acoustic reconstruction.
△ Less
Submitted 12 December, 2024;
originally announced December 2024.
-
Identification of structures driving trailing-edge noise. Part I -- Experimental investigation
Authors:
Simon Demange,
Zhenyang Yuan,
Simon Jekosch,
Ennes Sarradj,
Ardeshir Hanifi,
André V. G. Cavalieri,
Kilian Oberleithner
Abstract:
Trailing-edge (TE) noise is the main contributor to the acoustic signature of flows over airfoils. It originates from the interaction of turbulent structures in the airfoil boundary layer with the TE. This study experimentally identifies the flow structures responsible for TE noise by decomposing the data into spanwise modes and examining the impact of spanwise coherent structures on sound emissio…
▽ More
Trailing-edge (TE) noise is the main contributor to the acoustic signature of flows over airfoils. It originates from the interaction of turbulent structures in the airfoil boundary layer with the TE. This study experimentally identifies the flow structures responsible for TE noise by decomposing the data into spanwise modes and examining the impact of spanwise coherent structures on sound emission. We analyse a NACA0012 airfoil at moderate Reynolds numbers, ensuring broadband TE noise, and use synchronous measurements of surface and far-field acoustic pressure fluctuations with custom spanwise microphone arrays. Our results demonstrate the key role of coherent structures with large spanwise wavelengths in generating broadband TE noise. Spanwise modal decomposition of the acoustic field shows that only waves with spanwise wavenumbers below the acoustic wavenumber contribute to the radiated acoustic spectrum, consistent with theoretical scattering conditions. Moreover, a strong correlation is found between spanwise-coherent (zero wavenumber) flow structures and radiated acoustics. At frequencies corresponding to peak TE noise emission, the turbulent structures responsible for radiation exhibit strikingly large spanwise wavelengths, exceeding $60\%$ of the airfoil chord length. These findings have implications for numerical and experimental TE noise analysis and flow control. The correlation between spectrally decomposed turbulent fluctuations and TE noise paves the way for future aeroacoustic modelling through linearized mean field analysis. A companion paper further explores the nature of the spanwise-coherent structures using high-resolution numerical simulations of the same setup.
△ Less
Submitted 12 December, 2024;
originally announced December 2024.
-
Airfoil tonal noise reduction by roughness elements Part I -- Experimental investigation
Authors:
Elías Alva,
Zhenyang Yuan,
Tiago B. Araújo,
Filipe R. do Amaral,
Ardeshir Hanifi,
André V. G. Cavalieri
Abstract:
Laminar separation bubbles around airfoils lead to the growth of instability waves, which enhances to acoustic scattering at the trailing-edge, forming a feedback loop that produces to tonal noise. To reduce the trailing-edge tonal noise, an array of roughness elements was used over a NACA0012 airfoil, at low angles of attack and moderate Reynolds number. Aeroacoustics and flow visualization exper…
▽ More
Laminar separation bubbles around airfoils lead to the growth of instability waves, which enhances to acoustic scattering at the trailing-edge, forming a feedback loop that produces to tonal noise. To reduce the trailing-edge tonal noise, an array of roughness elements was used over a NACA0012 airfoil, at low angles of attack and moderate Reynolds number. Aeroacoustics and flow visualization experiments were performed for four configurations: a baseline smooth airfoil, two configurations with roughness elements on either airfoil surface (pressure side or suction side), and a fourth configuration with roughness elements at both airfoil surfaces. The roughness elements are made up of a row of spanwise periodically spaced cylinders, which were placed close to the mid-chord position. It is expected the proposed array of roughness elements stabilizes the Kelvin-Helmholtz instability mechanism that is present on the separated shear layer through the induction of streak structures. The separation bubble is assessed using oil flow visualizations, and the cases with roughness elements show the generation of streaks downstream of the array cylinders, disrupting the separation bubble. Acoustic measurements results show a decrease, and in some cases the total suppression, of the tonal noise at Reynolds numbers ranging from 0.6$\times$10$^5$ to 2.5$\times$10$^5$, and angles of attack ranging from 0 to 4 degrees.
△ Less
Submitted 9 October, 2024; v1 submitted 7 October, 2024;
originally announced October 2024.
-
Airfoil Tonal Noise Reduction by Roughness Elements. Part II -- Direct Simulations
Authors:
Zhenyang Yuan,
Elías Alva,
Tiago B. de Araújo,
André V. G. Cavalieri,
Ardeshir Hanifi
Abstract:
In a combined experimental and numerical effort we investigate airfoil tonal noise generation and reduction. The means of noise control are streak generators in form of cylindrical roughness elements. These elements are placed periodically along the span of airfoil at the mid chord streamwise position. Experiments are performed for a wide range of Reynolds number and angle of attack in a companion…
▽ More
In a combined experimental and numerical effort we investigate airfoil tonal noise generation and reduction. The means of noise control are streak generators in form of cylindrical roughness elements. These elements are placed periodically along the span of airfoil at the mid chord streamwise position. Experiments are performed for a wide range of Reynolds number and angle of attack in a companion work (Alva et al. 2024). In the present work we concentrate on numerical investigations for a further investigation of selected cases. We have performed wall-resolved large-eddy simulations for a NACA 0012 airfoil at zero angle of attack and Mach 0.3. Two Reynolds numbers (80,000 and 100,000) have been investigated, showing acoustic results consistent with experiments at the same Reynolds but lower Mach numbers. Roughness elements attenuate tones in the acoustic field and, for the higher Reynolds number, suppress them. Through Fourier decomposition and spectral POD analysis of streamwise velocity data, dominating structures have been identified. Further, the coupling between structures generated by surface roughness and instability modes (Kelvin-Helmholtz) of shear layer has been identified through stability analysis, suggesting stabilisation mechanisms by which the sound generation by the airfoil is reduced by the roughness elements.
△ Less
Submitted 9 October, 2024; v1 submitted 7 October, 2024;
originally announced October 2024.
-
Direct numerical simulation of transition under free-stream turbulence and the influence of large integral length scales
Authors:
Kristina Đurović,
Ardeshir Hanifi,
Philipp Schlatter,
Kenzo Sasaki,
Dan S. Henningson
Abstract:
Under action of free-stream turbulence (FST), elongated streamwise streaky structures are generated inside the boundary layer, and their amplitude and wavelength are crucial for the transition onset. While turbulence intensity is strongly correlated with the transitional Reynolds number, characteristic length scales of the FST are often considered to have a slight impact on the transition location…
▽ More
Under action of free-stream turbulence (FST), elongated streamwise streaky structures are generated inside the boundary layer, and their amplitude and wavelength are crucial for the transition onset. While turbulence intensity is strongly correlated with the transitional Reynolds number, characteristic length scales of the FST are often considered to have a slight impact on the transition location. However, a recent experiment by Fransson & Shahinfar (2020} shows significant effects of FST scales. They found that, for higher free-stream turbulence levels and larger integral length scales, an increase in the length scale postpones transition, contrary to established literature. Here, we aim at understanding these results by performing a series of high-fidelity simulations. These results provide understanding why the FST integral length scale affects the transition location differently. These integral length scales are so large that the wide streaks introduced in the boundary layer have substantially lower growth in the laminar region upstream of the transition to turbulence, than streaks induced by smaller integral length scales. The energy in the boundary layer subsequently propagate to smaller spanwise scales as a result of the non-linear interaction. When the energy has reached smaller spanwise scales larger amplitude streaks results in regions where the streak growth are larger. It takes longer for the energy from the wider streaks to propagate to the spanwise scales associated with the breakdown to turbulence, than for the those with smaller spanwise scales. Thus there is a faster transition for FST with lower integral length scales in this case.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Linear and nonlinear receptivity mechanisms in boundary layers subject to free-stream turbulence
Authors:
Diego C. P. Blanco,
Ardeshir Hanifi,
Dan S. Henningson,
André V. G. Cavalieri
Abstract:
Large-eddy simulations of a flat-plate boundary layer, without a leading edge, subject to multiple levels of incoming free stream turbulence are considered in the present work. Within an input-output model where non-linear terms of the incompressible Navier-Stokes equations are treated as an external forcing, we manage to separate inputs related to perturbations coming through the intake of the nu…
▽ More
Large-eddy simulations of a flat-plate boundary layer, without a leading edge, subject to multiple levels of incoming free stream turbulence are considered in the present work. Within an input-output model where non-linear terms of the incompressible Navier-Stokes equations are treated as an external forcing, we manage to separate inputs related to perturbations coming through the intake of the numerical domain, whose evolution represents a linear mechanism, and the volumetric non-linear forcing due to triadic interactions. With these, we perform the full reconstruction of the statistics of the flow, as measured in the simulations, to quantify pairs of wavenumbers and frequencies more affected by either linear or non-linear receptivity mechanisms. Inside the boundary layer, different wavenumbers at near-zero frequency reveal streaky structures. Those that are amplified predominantly via linear interactions with the incoming vorticity occur upstream and display transient growth, while those generated by the non-linear forcing are the most energetic and appear in more downstream positions. The latter feature vortices growing proportionally to the laminar boundary layer thickness, along with a velocity profile that agrees with the optimal amplification obtained by linear transient growth theory. The numerical approach presented is general and could potentially be extended to any simulation for which receptivity to incoming perturbations needs to be assessed.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
On the Low-Frequency Dynamics of Turbulent Separation Bubbles
Authors:
C. Cura,
A. Hanifi,
A. V. G. Cavalieri,
J. Weiss
Abstract:
The low-frequency modal and non-modal stability characteristics of an incompressible, pressure-gradient-induced turbulent separation bubble (TSB) are investigated with the objective of studying the mechanism responsible for the low-frequency contraction and expansion (breathing) commonly observed in experimental studies. The configuration of interest is a TSB generated on a flat test surface by a…
▽ More
The low-frequency modal and non-modal stability characteristics of an incompressible, pressure-gradient-induced turbulent separation bubble (TSB) are investigated with the objective of studying the mechanism responsible for the low-frequency contraction and expansion (breathing) commonly observed in experimental studies. The configuration of interest is a TSB generated on a flat test surface by a succession of adverse and favourable pressure gradients. The base flow selected for the analysis is the average TSB from the direct numerical simulation of Coleman et al. (J. Fluid Mech., vol. 847, 2018). Global linear stability analysis reveals that the flow is globally stable for wavenumbers. The mode closest to the stability threshold appears to occur at zero frequency and low, non-zero spanwise wavenumber. Resolvent analysis is then employed to examine the forced dynamics of the flow. At low frequency, a region of low, non-zero spanwise wavenumber is also discernible, where the receptivity appears to be driven by the identified weakly damped global mode. The results from resolvent analysis are compared to the unsteady experimental database of Le Floc'h et al. (J. Fluid Mech., vol. 902, 2020) in a similar TSB flow. The alignment between the optimal response and the first spectral proper orthogonal decomposition mode computed from the experiments is shown to exceed 95 %, while the spanwise wavenumber of the optimal response is consistent with that of the low-frequency breathing motion captured experimentally. This indicates that the fluctuations observed experimentally at low frequency closely match the response computed from resolvent analysis. Based on these results, we propose that the forced dynamics of the flow, driven by the weakly damped global mode, serve as a plausible mechanism for the origin of the low-frequency breathing motion commonly observed in experimental studies of TSBs.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Numerical investigation of the boundary layer stability on a section of a rotating wind turbine blade
Authors:
Thales Coelho Leite Fava,
Dan Henningson,
Ardeshir Hanifi
Abstract:
Laminar-turbulent transition on a rotating wind turbine blade at a chord Reynolds number of $1 \times 10^5$ and varying angles of attack ($AoA$) is studied with direct numerical simulations and linear stability theory. The rotation effects depend on the streamwise pressure gradient and direct/reverse flow state. In the $AoA=12.8^\circ$ case, rotation retards the flow in the laminar separation bubb…
▽ More
Laminar-turbulent transition on a rotating wind turbine blade at a chord Reynolds number of $1 \times 10^5$ and varying angles of attack ($AoA$) is studied with direct numerical simulations and linear stability theory. The rotation effects depend on the streamwise pressure gradient and direct/reverse flow state. In the $AoA=12.8^\circ$ case, rotation retards the flow in the laminar separation bubble (LSB) and renders the mixed Tollmien-Schlichting/Kelvin-Helmholtz (TS/KH) instability more unstable. Rotation fosters an oblique secondary instability mechanism, rapidly breaking the KH rolls into small-scale turbulence. A sub-harmonic mechanism is dominant in the non-rotating case, retarding transition. However, rotation accelerates the boundary layer upstream of separation, subject to a strong adverse pressure gradient (APG), stabilizing TS waves and delaying transition in $3\%$ and reattachment in $4\%$. In the $AoA=4.2^\circ$ and $AoA=1.2^\circ$ cases, rotation decelerates the flow upstream of separation, subject to a favorable pressure gradient (FPG), which makes TS waves more unstable. Nonetheless, rotation accelerates the separated flow, partially stabilizing the KH mechanism. Rotation further promotes the appearance of inflectional crossflow velocity profiles that triggers stationary and traveling crossflow modes. These modes are less unstable than the TS/KH mechanism of the separated shear layer but lead to the formation of coherent spanwise-velocity structures. For $AoA=4.2^\circ$, rotation strengthens the sub-harmonic secondary instability mechanism in the rotating case over the oblique one under no rotation. For $AoA=1.2^\circ$, the sub-harmonic mechanism is dominant regardless of rotation. Notice that the transition location is not changed by rotation in the $AoA=4.2^\circ$ and $AoA=1.2^\circ$ cases. Finally, rotation stabilizes the absolute instability found in these cases.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Simulating Airplane Aerodynamics with Body Forces: Actuator Line Method for Non-planar Wings
Authors:
Vitor G. Kleine,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
Two configurations typical of fixed-wing aircraft are simulated with the actuator line method (ALM): a wing with winglets and a T-tail. The ALM is extensively used in rotor simulations to model the blades by body forces, which are calculated from airfoil data and the relative flow velocity. This method has not been used to simulate airplane aerodynamics, despite its advantage of allowing coarser g…
▽ More
Two configurations typical of fixed-wing aircraft are simulated with the actuator line method (ALM): a wing with winglets and a T-tail. The ALM is extensively used in rotor simulations to model the blades by body forces, which are calculated from airfoil data and the relative flow velocity. This method has not been used to simulate airplane aerodynamics, despite its advantage of allowing coarser grids. This may be credited to the failure of the uncorrected ALM to accurately predict forces near the tip of wings, even for simple configurations. The recently-proposed vortex-based smearing correction shows improved results, suggesting those limitations are part of the past. For the non-planar configurations studied in this work, differences between the ALM with the original smearing correction and a non-linear lifting line method (LL) are observed near the intersection of surfaces, because the circulation generated in the numerical simulation differs from the calculated corrected circulation. A vorticity magnitude correction is proposed, which improves the agreement between ALM and LL. This second-order correction resolves the ambiguity in the velocity used to define the lift force. The good results indicate that the improved ALM can be used for airplane aerodynamics, with an accuracy similar to the LL.
△ Less
Submitted 18 March, 2023; v1 submitted 31 August, 2022;
originally announced September 2022.
-
Non-iterative vortex-based smearing correction for the actuator line method
Authors:
Vitor G. Kleine,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
The actuator line method (ALM) is extensively used in wind turbine and rotor simulations. However, its original uncorrected formulation overestimates the forces near the tip of the blades and does not reproduce well forces on translating wings. The recently proposed vortex-based smearing correction for the ALM is a correction based on physical and mathematical properties of the simulation that all…
▽ More
The actuator line method (ALM) is extensively used in wind turbine and rotor simulations. However, its original uncorrected formulation overestimates the forces near the tip of the blades and does not reproduce well forces on translating wings. The recently proposed vortex-based smearing correction for the ALM is a correction based on physical and mathematical properties of the simulation that allows for a more accurate and general ALM. So far, to correct the forces on the blades, the smearing correction depended on an iterative process at every time step, which is usually slower, less stable and less deterministic than direct methods. In this work, a non-iterative process is proposed and validated. First, we propose a formulation of the non-linear lifting line that is equivalent to the ALM with smearing correction, showing that their results are practically identical for a translating wing. Then, by linearizing the lifting line method, the iterative process of the correction is substituted by the direct solution of a small linear system. No significant difference is observed in the results of the iterative and non-iterative corrections, both in wing and rotor simulations. Additional contributions of the present work include the use of a more accurate approximation for the velocity induced by a smeared vortex segment and the implementation of a free-vortex wake model to define the vortex sheet, that contribute to the accuracy and generality of the method. The results present here may motivate the adoption of the ALM by other communities, for example, in fixed-wing applications.
△ Less
Submitted 18 March, 2023; v1 submitted 11 June, 2022;
originally announced June 2022.
-
The Stability of Wakes of Floating Wind Turbines
Authors:
Vitor G. Kleine,
Lucas Franceschini,
Bruno S. Carmo,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
Floating offshore wind turbines (FOWTs) are subjected to platform motion induced by wind and wave loads. The oscillatory movement trigger vortex instabilities, modifying the wake structure, influencing the flow reaching downstream wind turbines. In this work, the wake of a FOWT is analysed by means of numerical simulations and comparison with linear stability theory. Two simplified models based on…
▽ More
Floating offshore wind turbines (FOWTs) are subjected to platform motion induced by wind and wave loads. The oscillatory movement trigger vortex instabilities, modifying the wake structure, influencing the flow reaching downstream wind turbines. In this work, the wake of a FOWT is analysed by means of numerical simulations and comparison with linear stability theory. Two simplified models based on the stability of vortices are developed for all degrees of freedom of turbine motion. In our numerical simulations, the wind turbine blades are modeled as actuator lines and a spectral-element method with low dispersion and dissipation is employed to study the evolution of the perturbations. The turbine motion excites vortex instability modes predicted by the linear stability of helical vortices. The flow structures that are formed in the non-linear regime are a consequence of the growth of these modes and preserve some of the characteristics that can be explained and predicted by the linear theory. The number of vortices that interact and the growth rate of disturbances are well predicted by a simple stability model of a two-dimensional row of vortices. For all types of motion, the highest growth rate is observed when the frequency of motion is one and a half the frequency of rotation of the turbine; that induces the out-of-phase vortex pairing mechanism. For lower frequencies of motion, several vortices coalesce to form large flow structures, which cause high amplitude of oscillations in the streamwise velocities, that may increase fatigue or induce high amplitude motion on downstream turbines.
△ Less
Submitted 9 June, 2022; v1 submitted 22 March, 2022;
originally announced March 2022.
-
Stability of Two-dimensional Potential Flows Using Bicomplex Numbers
Authors:
Vitor G. Kleine,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
The use of the complex velocity potential and the complex velocity is widely disseminated in the study of two-dimensional incompressible potential flows. The advantages of working with complex analytical functions made this representation of the flow ubiquitous in the field of theoretical aerodynamics. However, this representation is not usually employed in linear stability studies, where the repr…
▽ More
The use of the complex velocity potential and the complex velocity is widely disseminated in the study of two-dimensional incompressible potential flows. The advantages of working with complex analytical functions made this representation of the flow ubiquitous in the field of theoretical aerodynamics. However, this representation is not usually employed in linear stability studies, where the representation of the velocity as real vectors is preferred by most authors, in order to allow the representation of the perturbation as the complex exponential function. Some of the classical attempts to use the complex velocity potential in stability studies suffer from formal errors. In this work, we present a framework that reconciles these two complex representations using bicomplex numbers. This framework is applied to the stability of the von Kármán vortex street and a generalized formula is found. It is shown that the classical results of the symmetric and staggered von Kármán vortex streets are just particular cases of the generalized dynamical system in bicomplex formulation.
△ Less
Submitted 2 May, 2022; v1 submitted 11 March, 2022;
originally announced March 2022.
-
Global stability of rigid-body-motion fluid-structure-interaction problems
Authors:
Prabal S. Negi,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
A rigorous derivation and validation for linear fluid-structure-interaction (FSI) equations for a rigid-body-motion problem is performed in an Eulerian framework. We show that the added-stiffness terms arising in the formulation of Fanion et al. (2000) vanish at the FSI interface in a first-order approximation. Several numerical tests with rigid-body motion are performed to show the validity of th…
▽ More
A rigorous derivation and validation for linear fluid-structure-interaction (FSI) equations for a rigid-body-motion problem is performed in an Eulerian framework. We show that the added-stiffness terms arising in the formulation of Fanion et al. (2000) vanish at the FSI interface in a first-order approximation. Several numerical tests with rigid-body motion are performed to show the validity of the derived formulation by comparing the time evolution between the linear and non-linear equations when the base flow is perturbed by identical small-amplitude perturbations. In all cases both the growth rate and angular frequency of the instability matches within $0.1\%$ accuracy. The derived formulation is used to investigate the phenomenon of symmetry breaking for a rotating cylinder with an attached splitter-plate. The results show that the onset of symmetry breaking can be explained by the existence of a zero-frequency linearly unstable mode of the coupled fluid-structure-interaction system. Finally, the structural sensitivity of the least stable eigenvalue is studied for an oscillating cylinder, which is found to change significantly when the fluid and structural frequencies are close to resonance.
△ Less
Submitted 21 October, 2019;
originally announced October 2019.
-
Unsteady aerodynamic effects in small-amplitude pitch oscillations of an airfoil
Authors:
Prabal S. Negi,
Ricardo Vinuesa,
Ardeshir Hanifi,
Philipp Schlatter,
Dan S. Henningson
Abstract:
High-fidelity wall-resolved large-eddy simulations (LES) are utilized to investigate the flow-physics of small-amplitude pitch oscillations of an airfoil at Re = 100,000. The investigation of the unsteady phenomenon is done in the context of natural laminar flow airfoils, which can display sensitive dependence of the aerodynamic forces on the angle of attack in certain "off-design" conditions. The…
▽ More
High-fidelity wall-resolved large-eddy simulations (LES) are utilized to investigate the flow-physics of small-amplitude pitch oscillations of an airfoil at Re = 100,000. The investigation of the unsteady phenomenon is done in the context of natural laminar flow airfoils, which can display sensitive dependence of the aerodynamic forces on the angle of attack in certain "off-design" conditions. The dynamic range of the pitch oscillations is chosen to be in this sensitive region. Large variations of the transition point on the suction-side of the airfoil are observed throughout the pitch cycle resulting in a dynamically rich flow response. Changes in the stability characteristics of a leading-edge laminar separation bubble has a dominating influence on the boundary layer dynamics and causes an abrupt change in the transition location over the airfoil. The LES procedure is based on a relaxation-term which models the dissipation of the smallest unresolved scales. The validation of the procedure is provided for channel flows and for a stationary wing at Re = 400,000.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
Turbulent boundary layers around wing sections up to Rec = 1,000,000
Authors:
R. Vinuesa,
P. S. Negi,
M. Atzori,
A. Hanifi,
D. S. Henningson,
P. Schlatter
Abstract:
Reynolds-number effects in the adverse-pressure-gradient (APG) turbulent boundary layer (TBL) developing on the suction side of a NACA4412 wing section are assessed in the present work. To this end, we analyze four cases at Reynolds numbers based on freestream velocity and chord length ranging from Rec = 100, 000 to 1,000,000, all of them with 5 degree angle of attack. The results of four well-res…
▽ More
Reynolds-number effects in the adverse-pressure-gradient (APG) turbulent boundary layer (TBL) developing on the suction side of a NACA4412 wing section are assessed in the present work. To this end, we analyze four cases at Reynolds numbers based on freestream velocity and chord length ranging from Rec = 100, 000 to 1,000,000, all of them with 5 degree angle of attack. The results of four well-resolved large-eddy simulations (LESs) are used to characterize the effect of Reynolds number on APG TBLs subjected to approximately the same pressure-gradient distribution (defined by the Clauser pressure-gradient parameter beta). Comparisons of the wing profiles with zero-pressure-gradient (ZPG) data at matched friction Reynolds numbers reveal that, for approximately the same beta distribution, the lower-Reynolds-number boundary layers are more sensitive to pressure-gradient effects. This is reflected in the values of the inner-scaled edge velocity Ue+ , the shape factor H, the components of the Reynolds-stress tensor in the outer region and the outer-region production of turbulent kinetic energy. This conclusion is supported by the larger wall-normal velocities and outer-scaled fluctuations observed in the lower-Rec cases.Thus, our results suggest that two complementing mechanisms contribute to the development of the outer region in TBLs and the formation of large-scale energetic structures: one mechanism associated with the increase in Reynolds number, and another one connected to the APG. Future extensions of the present work will be aimed at studying the differences in the outer-region energizing mechanisms due to APGs and increasing Reynolds number.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
A realizable data-driven approach to delay bypass transition with control theory
Authors:
Pierluigi Morra,
Kenzo Sasaki,
Ardeshir Hanifi,
André V. G. Cavalieri,
Dan S. Henningson
Abstract:
The current work presents a realizable method to control streaky disturbances in boundary layer flows and delay transition to turbulence via active flow control. Numerical simulations of the nonlinear transitional regime in a Blasius boundary layer are performed where streaks are excited in the boundary layer via a high level of free-stream turbulence (FST). The occurring disturbances are measured…
▽ More
The current work presents a realizable method to control streaky disturbances in boundary layer flows and delay transition to turbulence via active flow control. Numerical simulations of the nonlinear transitional regime in a Blasius boundary layer are performed where streaks are excited in the boundary layer via a high level of free-stream turbulence (FST). The occurring disturbances are measured via localized wall sensors and damped via near-wall actuators resembling plasma actuators. The time-varying amplitude of the signal of each actuator is computed by processing signals from the sensors. This processing is the result of two control laws: the Linear Quadratic Gaussian regulator (LQG) and the Inverse Feed-Forward Control technique (IFFC). The use of the first, LQG, requires a state-space representation of the system dynamics, so the flow is described via an operator that captures only the most relevant information of the dynamics and results in a reduced order model (ROM). The ROM is computed via the eigensystem realization algorithm, based on the impulse responses of the real system. Collecting such impulse responses may be unfeasible when considering FST because of the high dimensionality of the input forcing needed for a precise description of such a phenomenon. Here, a new method to identify the relevant system dynamics and generate the needed impulse responses is proposed, in a data-driven approach that would be realizable in experiments. Finally, the effectiveness of the technique in delaying bypass transition is shown. The work (i) presents a systematic way to deal with high dimensional disturbances to build ROMs for a control technique, and (ii) shows that even when considering constraints such as the type and size of actuators and sensors, it is possible to achieve at least as large delay of bypass transition as that obtained in more idealized cases found in literature.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
On the role of actuation for the control of streaky structures in boundary layers
Authors:
Kenzo Sasaki,
Pierluigi Morra,
André V G. Cavalieri,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
This work deals with the closed-loop control of streaky structures induced by free-stream turbulence in a zero-pressure gradient, transitional boundary layer, by means of localized sensors and actuators. A linear quadratic gaussian regulator is considered along with a system identification technique to build reduced-order models for control. Three actuators are developed with different spatial sup…
▽ More
This work deals with the closed-loop control of streaky structures induced by free-stream turbulence in a zero-pressure gradient, transitional boundary layer, by means of localized sensors and actuators. A linear quadratic gaussian regulator is considered along with a system identification technique to build reduced-order models for control. Three actuators are developed with different spatial supports, corresponding to a baseline shape with only vertical forcing, and to two other shapes obtained by different optimization procedures. A computationally efficient method is derived to obtain an actuator which aims to induce the exact structures which are inside the boundary layer, given in terms of their first spectral proper orthogonal decomposition mode, and an actuator that maximizes the energy of induced downstream structures. Two free-stream turbulence levels were evaluated, corresponding to 3.0% and 3.5%, and closed-loop control is applied in large-eddy simulations of transitional boundary layers. All three actuators lead to significant delays in the transition to turbulence and were shown to be robust to mild variations in the free-stream turbulence levels. Differences are understood in terms of the SPOD of actuation and FST-induced fields along with the causality of the control scheme. The actuator optimized to generate the leading downstream SPOD mode, representing the streaks in the open-loop flow, leads to the highest transition delay, which can be understood due to its capability of closely cancelling structures in the boundary layer. However, it is shown that even with the actuator located downstream of the input measurement it may become impossible to cancel incoming disturbances in a causal way, depending on the wall-normal position of the output and on the actuator considered, which limits sensor and actuator placement capable of good closed-loop performance.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
Assessment of turbulent boundary layers on a NACA4412 wing section at moderate Re
Authors:
R. Vinuesa,
S. M. Hosseini,
A. Hanifi,
D. S. Henningson,
P. Schlatter
Abstract:
The results of a DNS of the flow around a wing section represented by a NACA4412 profile, with Rec = 400, 000 and 5 degree angle of attack, are presented in this study. The high-order spectral element code Nek5000 was used for the computations. The Clauser pressure-gradient parameter ? ranges from 0 and 85 on the suction side, and the maximum Re_theta and Re_tau values are around 2,800 and 373, re…
▽ More
The results of a DNS of the flow around a wing section represented by a NACA4412 profile, with Rec = 400, 000 and 5 degree angle of attack, are presented in this study. The high-order spectral element code Nek5000 was used for the computations. The Clauser pressure-gradient parameter ? ranges from 0 and 85 on the suction side, and the maximum Re_theta and Re_tau values are around 2,800 and 373, respectively. Comparisons between the suction side with ZPG TBL data show a more prominent wake, a steeper logarithmic region and lower velocities in the buffer region. The APG also leads to a progressively increasing value of the inner peak in the tangential velocity fluctuations, as well as the development of an outer peak, which is also observed in the other components of the Reynolds stress tensor. Other effects of strong APGs are increased production and dissipation profiles across the boundary layer, together with enhanced viscous diffusion and velocity-pressure-gradient correlation values near the wall. All these effects are connected to the fact that the large-scale motions of the flow become energized due to the APG, as apparent from spanwise premultiplied power spectral density plots.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Reynolds-number effects in turbulent boundary layers around wing sections
Authors:
Ricardo Vinuesa,
Prabal Negi,
Marco Atzori,
Ardeshir Hanifi,
Dan S. Henningson,
Philipp Schlatter
Abstract:
Four well-resolved LESs of the turbulent boundary layers around a NACA4412 wing section, with Rec ranging from 100,000 to 1,000,000, were performed at 5 degree angle of attack. By comparing the turbulence statistics with those in ZPG TBLs at approximately matching Re_tau, we find that the effect of the adverse pressure gradient (APG) is more intense at lower Reynolds numbers. This indicates that a…
▽ More
Four well-resolved LESs of the turbulent boundary layers around a NACA4412 wing section, with Rec ranging from 100,000 to 1,000,000, were performed at 5 degree angle of attack. By comparing the turbulence statistics with those in ZPG TBLs at approximately matching Re_tau, we find that the effect of the adverse pressure gradient (APG) is more intense at lower Reynolds numbers. This indicates that at low Re the outer region of the TBL becomes more energized through the wall-normal convection associated to the APG. This is also reflected in the fact that the inner-scaled wall-normal velocity is larger on the suction side at lower Reynolds numbers. In particular, the wing cases at Rec = 200,000 and 400,000 exhibit wall-normal velocities 40% and 20% larger, respectively, than the case with Rec = 1,000,000. Consequently, the outer-region energizing mechanism associated to the APG is complementary to that present in high-Re TBLs.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
