Showing 1–37 of 37 results for author: Hall, T

Low-energy nuclear recoil calibration of the LUX-ZEPLIN experiment with a photoneutron source

Authors: J. Aalbers, D. S. Akerib, A. K. Al Musalhi, F. Alder, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, A. Baker, S. Balashov, J. Bang, J. W. Bargemann, E. E. Barillier, K. Beattie, T. Benson, A. Bhatti, T. P. Biesiadzinski, H. J. Birch, E. Bishop, G. M. Blockinger, B. Boxer, C. A. J. Brew , et al. (185 additional authors not shown)

Abstract: The LZ experiment is a liquid xenon time-projection chamber (TPC) searching for evidence of particle dark matter interactions. In the simplest assumption of elastic scattering, many dark matter models predict an energy spectrum which rises quasi-exponentially with decreasing energy transfer to a target atom. LZ expects to detect coherent neutrino-nucleus scattering of $^{8}$B solar neutrinos, the… ▽ More The LZ experiment is a liquid xenon time-projection chamber (TPC) searching for evidence of particle dark matter interactions. In the simplest assumption of elastic scattering, many dark matter models predict an energy spectrum which rises quasi-exponentially with decreasing energy transfer to a target atom. LZ expects to detect coherent neutrino-nucleus scattering of $^{8}$B solar neutrinos, the signal from which is very similar to a dark matter particle with mass of about 5.5 GeV/$c^{2}$, which result in typical nuclear recoil energies of $<$5 keV$_{\text{nr}}$. Therefore, it is of crucial importance to calibrate the response of recoiling xenon nuclei to keV-energy recoils. This analysis details the first in situ photoneutron calibration of the LZ detector and probes its response in this energy regime. △ Less

Submitted 18 September, 2025; originally announced September 2025.

Flow-dependent tagging of $^{214}$Pb decays in the LZ dark matter detector

Authors: J. Aalbers, D. S. Akerib, A. K. Al Musalhi, F. Alder, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, A. Baker, S. Balashov, J. Bang, J. W. Bargemann, E. E. Barillier, K. Beattie, T. Benson, A. Bhatti, T. P. Biesiadzinski, H. J. Birch, E. Bishop, G. M. Blockinger, B. Boxer, C. A. J. Brew , et al. (183 additional authors not shown)

Abstract: The LUX-ZEPLIN (LZ) experiment is searching for dark matter interactions in a liquid xenon time projection chamber (LXe-TPC). This article demonstrates how control of the flow state in the LXe-TPC enables the identification of pairs of sequential alpha-decays, which are used to map fluid flow and ion drift in the liquid target. The resulting transport model is used to tag $^{214}$Pb beta-decays, a… ▽ More The LUX-ZEPLIN (LZ) experiment is searching for dark matter interactions in a liquid xenon time projection chamber (LXe-TPC). This article demonstrates how control of the flow state in the LXe-TPC enables the identification of pairs of sequential alpha-decays, which are used to map fluid flow and ion drift in the liquid target. The resulting transport model is used to tag $^{214}$Pb beta-decays, a leading background to dark matter signals in LZ. Temporally evolving volume selections, at a cost of 9.0% of exposure, target the decay of each $^{214}$Pb atom up to 81 minutes after production, resulting in (63 $\pm$ 6$_{\mathrm{stat}}$ $\pm$ 7$_{\mathrm{sys}}$)% identification of $^{214}$Pb decays to ground state. We also demonstrate how flow-based tagging techniques enable a novel calibration side band that is concurrent with science data. △ Less

Submitted 26 August, 2025; originally announced August 2025.

Comments: 21 pages, 15 figures

Neutrinoless Double Beta Decay Sensitivity of the XLZD Rare Event Observatory

Authors: XLZD Collaboration, J. Aalbers, K. Abe, M. Adrover, S. Ahmed Maouloud, D. S. Akerib, A. K. Al Musalhi, F. Alder, L. Althueser, D. W. P. Amaral, C. S. Amarasinghe, A. Ames, B. Andrieu, N. Angelides, E. Angelino, B. Antunovic, E. Aprile, H. M. Araújo, J. E. Armstrong, M. Arthurs, M. Babicz, D. Bajpai, A. Baker, M. Balzer, J. Bang , et al. (419 additional authors not shown)

Abstract: The XLZD collaboration is developing a two-phase xenon time projection chamber with an active mass of 60 to 80 t capable of probing the remaining WIMP-nucleon interaction parameter space down to the so-called neutrino fog. In this work we show that, based on the performance of currently operating detectors using the same technology and a realistic reduction of radioactivity in detector materials,… ▽ More The XLZD collaboration is developing a two-phase xenon time projection chamber with an active mass of 60 to 80 t capable of probing the remaining WIMP-nucleon interaction parameter space down to the so-called neutrino fog. In this work we show that, based on the performance of currently operating detectors using the same technology and a realistic reduction of radioactivity in detector materials, such an experiment will also be able to competitively search for neutrinoless double beta decay in $^{136}$Xe using a natural-abundance xenon target. XLZD can reach a 3$σ$ discovery potential half-life of 5.7$\times$10$^{27}$ yr (and a 90% CL exclusion of 1.3$\times$10$^{28}$ yr) with 10 years of data taking, corresponding to a Majorana mass range of 7.3-31.3 meV (4.8-20.5 meV). XLZD will thus exclude the inverted neutrino mass ordering parameter space and will start to probe the normal ordering region for most of the nuclear matrix elements commonly considered by the community. △ Less

Submitted 30 April, 2025; v1 submitted 23 October, 2024; originally announced October 2024.

Comments: 29 pages, 7 figures

Journal ref: J. Phys. G: Nucl. Part. Phys. 52 (2025) 045102

The XLZD Design Book: Towards the Next-Generation Liquid Xenon Observatory for Dark Matter and Neutrino Physics

Authors: XLZD Collaboration, J. Aalbers, K. Abe, M. Adrover, S. Ahmed Maouloud, D. S. Akerib, A. K. Al Musalhi, F. Alder, L. Althueser, D. W. P. Amaral, C. S. Amarasinghe, A. Ames, B. Andrieu, N. Angelides, E. Angelino, B. Antunovic, E. Aprile, H. M. Araújo, J. E. Armstrong, M. Arthurs, M. Babicz, A. Baker, M. Balzer, J. Bang, E. Barberio , et al. (419 additional authors not shown)

Abstract: This report describes the experimental strategy and technologies for XLZD, the next-generation xenon observatory sensitive to dark matter and neutrino physics. In the baseline design, the detector will have an active liquid xenon target of 60 tonnes, which could be increased to 80 tonnes if the market conditions for xenon are favorable. It is based on the mature liquid xenon time projection chambe… ▽ More This report describes the experimental strategy and technologies for XLZD, the next-generation xenon observatory sensitive to dark matter and neutrino physics. In the baseline design, the detector will have an active liquid xenon target of 60 tonnes, which could be increased to 80 tonnes if the market conditions for xenon are favorable. It is based on the mature liquid xenon time projection chamber technology used in current-generation experiments, LZ and XENONnT. The report discusses the baseline design and opportunities for further optimization of the individual detector components. The experiment envisaged here has the capability to explore parameter space for Weakly Interacting Massive Particle (WIMP) dark matter down to the neutrino fog, with a 3$σ$ evidence potential for WIMP-nucleon cross sections as low as $3\times10^{-49}\rm\,cm^2$ (at 40 GeV/c$^2$ WIMP mass). The observatory will also have leading sensitivity to a wide range of alternative dark matter models. It is projected to have a 3$σ$ observation potential of neutrinoless double beta decay of $^{136}$Xe at a half-life of up to $5.7\times 10^{27}$ years. Additionally, it is sensitive to astrophysical neutrinos from the sun and galactic supernovae. △ Less

Submitted 14 April, 2025; v1 submitted 22 October, 2024; originally announced October 2024.

Comments: 33 pages, 14 figures

Simulation of optoelectronic oscillator injection locking, pulling and spiking phenomena

Authors: A. Banerjee, T. J. Hall

Abstract: Complex envelope and reduced phase simulation models describing the dynamical behavior of an optoelectronic oscillator (OEO) under injection by an external source are described. The models are built on the foundations of a previously reported delay integral differential equation (DDE) theory of injection locking of time delay oscillators (TDO) such as the OEO. The DDE formulation is particularly a… ▽ More Complex envelope and reduced phase simulation models describing the dynamical behavior of an optoelectronic oscillator (OEO) under injection by an external source are described. The models are built on the foundations of a previously reported delay integral differential equation (DDE) theory of injection locking of time delay oscillators (TDO) such as the OEO. The DDE formulation is particularly amenable to high precision simulation using the Simulink block diagram environment. The correspondence between the blocks and the oscillator components offers intuition and considerable freedom to explore different circuit architectures and design variations with minimal coding effort. The simulations facilitate the study of the profound effect the multimode nature of a TDO has on its dynamical behavior. The reduced phase models that make use of the Leeson approximation are generally successful in reproducing the results of complex envelope models for established oscillations except for spiking phenomena for which the Leeson approximation fails. Simulation results demonstrating phenomena not captured by classical injection theory are presented, including multimode oscillation, the appearance of sidemodes in the RF and phase noise spectrum, and persistent spike trains redolent of recent experimental observations of 2pi phase pulse trains in a broadband OEO under injection. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Bubble Cloud Characteristics and Ablation Efficiency in Dual-Frequency Intrinsic Threshold Histotripsy

Authors: Connor Edsall, Laura Huynh, Tim Hall, Eli Vlaisavljevich

Abstract: Histotripsy is a non-thermal focused ultrasound ablation method that destroys tissue through the generation and activity of acoustic cavitation. Intrinsic threshold histotripsy generates bubble clouds when the dominant negative pressure phase of a single-cycle pulse exceeds an intrinsic threshold of ~25-30 MPa. The ablation efficiency is dependent upon the size and density of bubbles within the bu… ▽ More Histotripsy is a non-thermal focused ultrasound ablation method that destroys tissue through the generation and activity of acoustic cavitation. Intrinsic threshold histotripsy generates bubble clouds when the dominant negative pressure phase of a single-cycle pulse exceeds an intrinsic threshold of ~25-30 MPa. The ablation efficiency is dependent upon the size and density of bubbles within the bubble cloud. This work investigates the effects of dual-frequency pulsing schemes on the bubble cloud behavior and ablation efficiency in intrinsic threshold histotripsy. A modular histotripsy transducer applied dual-frequency histotripsy pulses to tissue phantoms with a 1:1 pressure ratio from 500 kHz and 3 MHz frequency elements and varying the 3 MHz pulse arrival relative to the arrival of the 500 kHz pulse (-100 ns, 0 ns, and +100 ns). High-speed optical imaging captured cavitation effects to characterize bubble cloud and individual bubble dynamics. Lesion formation and ablation efficiency were also investigated in red blood cell (RBC) phantoms. Results showed that the single bubble and bubble cloud size for dual-frequency cases were intermediate to published results for the component single frequencies of 500 kHz and 3 MHz. Bubble cloud size and dynamics were also shown to be altered by the arrival time of the 3 MHz pulse relative to the 500 kHz pulse, with more uniform cloud expansion and collapse observed for early (-100 ns) arrival. Finally, RBC phantom experiments showed that dual-frequency exposures were capable of generating precise lesions with smaller areas and higher ablation efficiencies than previously published results for 500 kHz or 3 MHz. Overall, results demonstrate dual-frequency histotripsy's ability to modulate bubble cloud size and dynamics can be leveraged to produce precise lesions at higher ablation efficiencies than previously observed for single-frequency pulsing. △ Less

Submitted 6 July, 2023; originally announced July 2023.

Comments: 22 pages, 10 figures, 2 tables

PT-symmetric cross injection dual optoelectronic oscillator

Authors: Mehedi Hasan, Abhijit Banerjee, Trevor Hall

Abstract: An optoelectronic oscillator (OEO) is a time delay oscillator (TDO) that uses photonics technology to provide the long delay required to generate pristine microwave carriers. Parity-time (PT) symmetry concepts applied to an OEO offer the potential to achieve combined low phase noise and high sidemode suppression. A TDO composed of a pair of identical ring resonators coupled by a 2x2 coupler is mod… ▽ More An optoelectronic oscillator (OEO) is a time delay oscillator (TDO) that uses photonics technology to provide the long delay required to generate pristine microwave carriers. Parity-time (PT) symmetry concepts applied to an OEO offer the potential to achieve combined low phase noise and high sidemode suppression. A TDO composed of a pair of identical ring resonators coupled by a 2x2 coupler is modelled, and the coupler transmission matrix required for the oscillator to be PT- symmetric is derived. In a first configuration, the coupler is interpreted as the composition of a gain/loss block and a Mach-Zehnder interferometer (MZI) block. In practice, there are excess losses that must be compensated by a special dual amplifier with saturation characteristics compatible with PT- symmetry. The PT- symmetry phase transition determined by the gain/loss and the MZI differential phase parameters is found to be global and not local in its effect on modes. This is resolved by placing a short delay line within one arm of the MZI resulting in a frequency dependent and hence local mode-selective PT- symmetry phase transition. In addition, it is demonstrated that the first configuration may be transformed into a second but equivalent configuration as a cross-injection dual TDO with imbalanced delays. The local PT- symmetry phase transition may then be understood in terms of the Vernier effect. Advantageously, the second configuration enables the special dual amplifier to be replaced by a pair of matched but otherwise independent amplifiers. Thereby, the second configuration is amenable to practical implementation as a dual OEO using standard RF-photonic and RF-electronic components. The theory is validated by complex envelope model simulations using Simulink and phase model analytic results evaluated using MATLAB. There is excellent agreement between the theoretical and simulation results. △ Less

Submitted 26 June, 2023; originally announced June 2023.

Comments: 40 pages, 13 figures

Continuous tuning & thermally induced frequency drift stabilisation of time delay oscillators such as the optoelectronic oscillator

Authors: Mehedi Hasan, Charles Nicholls, Keegan Pitre, Trevor Hall

Abstract: Delay line oscillators based on photonic components, such as the optoelectronic oscillator (OEO), offer the potential for realization of phase noise levels orders of magnitude lower than achievable by conventional microwave sources. Fibre optic-based delay lines can realize the large delay required for low phase noise systems whilst simultaneously achieving insertion loss levels that can be compen… ▽ More Delay line oscillators based on photonic components, such as the optoelectronic oscillator (OEO), offer the potential for realization of phase noise levels orders of magnitude lower than achievable by conventional microwave sources. Fibre optic-based delay lines can realize the large delay required for low phase noise systems whilst simultaneously achieving insertion loss levels that can be compensated by available microwave and photonic amplification technologies. However, the long fibre is vulnerable to environmental perturbations such as mechanical vibrations and variations in ambient temperature, which result in short term fluctuations and thermally induced drift of the oscillation frequency. The phase shifter used conventionally to adjust the frequency of an OEO to enable phase lock has a finite range that is insufficient to compensate the delay change resulting from operational temperature ranges. A solution to continuous tuning without mode-hopping and to compensation of thermally induced frequency drift without loss of lock of a time delay oscillator is proposed. The basic concept is to introduce a tuning mechanism that works with Cartesian co-ordinates on the complex plane and to avoid explicit use of polar co-ordinates. Consequently, the transmission of the tuning component may traverse the unit circle in either direction multiple times without range limitation to the phase. Thereby tuning by mode-hopping is avoided and expedients to stabilisation, such as the use of tunable lasers within a control loop or precision temperature stabilisation measures are not required. The concept is verified by Simulink simulations. The method has been experimentally tested successfully using a prototype OEO phase locked to a system reference. Solid lock was maintained even when the OEO was placed in an oven and cycled over a temperature range from ambient to 80 °C. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Comments: 15 pages, 12 figures

Broadband high-resolution integrated spectrometer architecture & data processing method

Authors: Mehedi Hasan, Gazi Mahamud Hasan, Houman Ghorbani, Mohammad Rad, Peng Liu, Eric Bernier, Trevor Hall

Abstract: Up-to-date network telemetry is the key enabler for resource optimization by capacity scaling, fault recovery, and network reconfiguration among other means. Reliable optical performance monitoring in general and, specifically, the monitoring of the spectral profile of WDM signals in fixed- and flex- grid architectures across the entire C-band, remains challenging. This article describes a two-sta… ▽ More Up-to-date network telemetry is the key enabler for resource optimization by capacity scaling, fault recovery, and network reconfiguration among other means. Reliable optical performance monitoring in general and, specifically, the monitoring of the spectral profile of WDM signals in fixed- and flex- grid architectures across the entire C-band, remains challenging. This article describes a two-stage spectrometer architecture amenable to integration on a single chip that can measure quantitatively the spectrum across the entire C-band with a resolution of 1 GHz approximately. The first stage consists of a ring resonator with intra-ring phase shifter to provide a tuneable fine filter. The second stage makes use of an AWG subsystem and novel processing algorithm to synthesize a tuneable coarse filter with a flat passband which isolates individual resonances of a multiplicity of ring resonances. Due to its maturity and low loss, CMOS compatible Si$_3$N$_4$ is chosen for integration. A fabricated ring resonator functioning over the entire C-band with 1.3 GHz FWHM bandwidth resonances tunable over a complete free spectral range of 50 GHz is experimentally demonstrated. The complete system operation is demonstrated using an industry standard simulation tool and AWG constructor data. The operation of the circuit is invariant to the optical path length between individual components substantially improving robustness to fabrication process variations. △ Less

Submitted 16 January, 2023; originally announced January 2023.

Comments: 16 pages, 7 figures. arXiv admin note: substantial text overlap with arXiv:2108.10121

Method for in-solution, high-throughput T1 relaxometry using fluorescent nanodiamonds

Authors: Erin. S. Grant, Mina Barzegar Amiri Olia, Ella. P. Walsh, Liam T. Hall, Gawain McColl, David A. Simpson

Abstract: Fluorescent nanodiamonds (FNDs) have been exploited as sensitive quantum probes for nanoscale chemical and biological sensing applications, with the majority of demonstrations to date relying on the detection of single FNDs. This places significant limits on the measurement time, throughput and statistical significance of a measured result as there is usually marked inhomogeneity within FND sample… ▽ More Fluorescent nanodiamonds (FNDs) have been exploited as sensitive quantum probes for nanoscale chemical and biological sensing applications, with the majority of demonstrations to date relying on the detection of single FNDs. This places significant limits on the measurement time, throughput and statistical significance of a measured result as there is usually marked inhomogeneity within FND samples. Here we have developed a measurement platform that can report the T1 spin relaxation time from a large ensemble of FNDs in solution. We first describe a refined sensing protocol for this modality and then use it to identify the optimal FND size for the detection of paramagnetic targets. Our approach is simple to set up, robust and can be used for rapid material characterisation or a variety of in-situ quantum sensing applications. △ Less

Submitted 27 November, 2022; originally announced November 2022.

Comments: 8 pages, 3 figures

Incorporating Gradient Similarity for Robust Time Delay Estimation in Ultrasound Elastography

Authors: Md Ashikuzzaman, Timothy J. Hall, Hassan Rivaz

Abstract: Energy-based ultrasound elastography techniques minimize a regularized cost function consisting of data and continuity terms to obtain local displacement estimates based on the local time-delay estimation (TDE) between radio-frequency (RF) frames. The data term associated with the existing techniques takes only the amplitude similarity into account and hence is not sufficiently robust to the outli… ▽ More Energy-based ultrasound elastography techniques minimize a regularized cost function consisting of data and continuity terms to obtain local displacement estimates based on the local time-delay estimation (TDE) between radio-frequency (RF) frames. The data term associated with the existing techniques takes only the amplitude similarity into account and hence is not sufficiently robust to the outlier samples present in the RF frames under consideration. This drawback creates noticeable artifacts in the strain image. To resolve this issue, we propose to formulate the data function as a linear combination of the amplitude and gradient similarity constraints. We estimate the adaptive weight concerning each similarity term following an iterative scheme. Finally, we optimize the non-linear cost function in an efficient manner to convert the problem to a sparse system of linear equations which are solved for millions of variables. We call our technique rGLUE: robust data term in GLobal Ultrasound Elastography. rGLUE has been validated using simulation, phantom, in vivo liver, and breast datasets. In all of our experiments, rGLUE substantially outperforms the recent elastography methods both visually and quantitatively. For simulated, phantom, and in vivo datasets, respectively, rGLUE achieves 107%, 18%, and 23% improvements of signal-to-noise ratio (SNR) and 61%, 19%, and 25% improvements of contrast-to-noise ratio (CNR) over GLUE, a recently-published elastography algorithm. △ Less

Submitted 30 March, 2022; originally announced March 2022.

Optical Wavelength Meter with Machine Learning Enhanced Precision

Authors: Gazi Mahamud Hasan, Mehedi Hasan, Peng Liu, Mohammad Rad, Eric Bernier, Trevor James Hall

Abstract: Diverse applications in photonics and microwave engineering require a means of measurement of the instantaneous frequency of a signal. A photonic implementation typically applies an interferometer equipped with three or more output ports to measure the frequency dependent phase shift provided by an optical delay line. The components constituting the interferometer are prone to impairments which re… ▽ More Diverse applications in photonics and microwave engineering require a means of measurement of the instantaneous frequency of a signal. A photonic implementation typically applies an interferometer equipped with three or more output ports to measure the frequency dependent phase shift provided by an optical delay line. The components constituting the interferometer are prone to impairments which results in erroneous measurements. It is shown that the information to be retrieved is encoded by a three-component vector that lies on a circular cone within a three-dimensional Cartesian object space. The measured data belongs to the image of the object space under a linear map that describes the action of the interferometer. Assisted by a learning algorithm, an inverse map from the image space into the object space is constructed. The inverse map compensates for a variety of impairments while being robust to noise. Simulation results demonstrate that, to the extent the interferometer model captures all significant impairments, a precision limited only by the level of random noise is attainable. A wavelength meter architecture is fabricated on Si3N4 photonic integration platform to prove the method experimentally. Applied to the measured data, greater than an order of magnitude improvement in precision is achieved by the proposed method compared to the conventional method. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: 18 pages, 9 figures, 1 table

Experimental realization of a universal RF photonic integrated circuit

Authors: Mehedi Hasan, Gazi Mahamud Hasan, Trevor Hall

Abstract: This paper demonstrates the operation of a universal RF photonic circuit that consists of a generalized Mach Zehnder Interferometer architecture with its Nx1 combiner replaced by a NxN optical DFT network. The proposed circuit architecture can be used for SSB modulation, frequency up-conversion/down-conversion, frequency multiplication and phase correlated subcarrier generation based on the choice… ▽ More This paper demonstrates the operation of a universal RF photonic circuit that consists of a generalized Mach Zehnder Interferometer architecture with its Nx1 combiner replaced by a NxN optical DFT network. The proposed circuit architecture can be used for SSB modulation, frequency up-conversion/down-conversion, frequency multiplication and phase correlated subcarrier generation based on the choice of output ports and dimension (N) of the circuit. An alternative representation of the circuit is also reported with the aim of a systematic demultiplexing. A transfer matrix approach is used to develop the theoretical predictions which are verified by simulation using industry standard software tool. An integrated circuit based on silicon photonics technology readily available in the laboratory is used for experimental confirmation. △ Less

Submitted 10 February, 2022; originally announced February 2022.

Comments: 11 pages, 7 figures, 2 tables

Injection Locking of Optoelectronic Oscillators with Large Delay

Authors: Mehedi Hasan, Abhijit Banerjee, Trevor James Hall

Abstract: The optoelectronic oscillator is a delay line oscillator that leverages optical fiber technology to realize the large delay required for low phase noise systems. Spurious sidemodes are an artifact of the delay line oscillator, yet treatments of injection locking of optoelectronic oscillators have relied on the application of classical injection locking theory valid only for single mode oscillators… ▽ More The optoelectronic oscillator is a delay line oscillator that leverages optical fiber technology to realize the large delay required for low phase noise systems. Spurious sidemodes are an artifact of the delay line oscillator, yet treatments of injection locking of optoelectronic oscillators have relied on the application of classical injection locking theory valid only for single mode oscillators. The large delay contributed by the optical fiber delay line is accounted for by classical theory only in part through the quality factor Q that captures the round-trip group delay in a neighborhood of the oscillation frequency. This paper presents a new formulation of time delay oscillators subject to injection that describes all the essential features of their dynamics and phase noise. The common assumptions of a single mode oscillator and weak injection are removed. This is important to correctly predict the locking range, the suppression of sidemodes and the phase noise spectrum. The findings of the analysis are validated by experimental measurements provided by an optoelectronic oscillator under injection by an external source. △ Less

Submitted 24 October, 2021; originally announced October 2021.

Comments: 14 Pages, 5 Figures

Circuit design and integration feasibility of a high-resolution broadband on-chip spectral monitor

Authors: Mehedi Hasan, Gazi Mahamud Hasan, Houman Ghorbani, Mohammad Rad, Peng Liu, Eric Bernier, Trevor Hall

Abstract: Up-to-date network telemetry is the key enabler for resource optimization by a variety of means including capacity scaling, fault recovery, network reconfiguration. Reliable optical performance monitoring in general and specifically the monitoring of the spectral profile of WDM signals in fixed- and flex-grid architecture across the entire C-band remains challenging. This article describes a spect… ▽ More Up-to-date network telemetry is the key enabler for resource optimization by a variety of means including capacity scaling, fault recovery, network reconfiguration. Reliable optical performance monitoring in general and specifically the monitoring of the spectral profile of WDM signals in fixed- and flex-grid architecture across the entire C-band remains challenging. This article describes a spectrometer circuit architecture along with an original data processing algorithm that combined can measure the spectrum quantitatively across the entire C-band aiming at 1 GHz resolution bandwidth. The circuit is composed of a scanning ring resonator followed by a parallel arrangement of AWGs with interlaced channel spectra. The comb of ring resonances provides the high resolution and the algorithm creates a virtual tuneable AWG that isolates individual resonances of the comb within the flat pass-band of its synthesized channels. The parallel arrangement of AWGs may be replaced by a time multiplexed multi-input port AWG. The feasibility of a ring resonator functioning over whole C-band is experimentally validated. Full tuning of the comb of resonances over a free spectral range is achieved with a high-resolution bandwidth of 1.30 GHz. Due to its maturity and low loss, CMOS compatible silicon nitride is chosen for integration. Additionally, the whole system demonstration is presented using industry standard simulation tool. The architecture is robust to fabrication process variations owing to its data processing approach. △ Less

Submitted 11 August, 2021; originally announced August 2021.

Comments: 17 pages, 13 figures

Circuit architecture of a sub-GHz resolution panoramic C band on-chip spectral sensor

Authors: Mehedi Hasan, Mohammad Rad, Gazi Mahamud Hasan, Peng Liu, Patric Dumais, Eric Bernier, Trevor Hall

Abstract: Monitoring the state of the optical network is a key enabler for programmability of network functions, protocols and efficient use of the spectrum. A particular challenge is to provide the SDN-EON controller with a panoramic view of the complete state of the optical spectrum. This paper describes the architecture for compact on-chip spectrometry targeting high resolution across the entire C-band t… ▽ More Monitoring the state of the optical network is a key enabler for programmability of network functions, protocols and efficient use of the spectrum. A particular challenge is to provide the SDN-EON controller with a panoramic view of the complete state of the optical spectrum. This paper describes the architecture for compact on-chip spectrometry targeting high resolution across the entire C-band to reliably and accurately measure the spectral profile of WDM signals in fixed and flex-grid architectures. An industry standard software tool is used to validate the performance of the spectrometer. The fabrication of the proposed design is found to be practical. △ Less

Submitted 24 October, 2019; originally announced December 2019.

Comments: 14 pages, 10 figures

Quantum magnetic imaging of iron biomineralisation in teeth of the chiton Acanthopleura hirtosa

Authors: Julia M. McCoey, Mirai Matsuoka, Robert W. de Gille, Liam T. Hall, Jeremy A. Shaw, Jean-Philippe Tetienne, David Kisailus, Lloyd C. L. Hollenberg, David A. Simpson

Abstract: Iron biomineralisation is critical for life. Nature capitalises on the physical attributes of iron biominerals for a variety of functional, structural and sensory applications. Although magnetism is an integral property of iron biominerals, the role it plays in their nano-assembly remains a fundamental, unanswered question. This is well exemplified by the magnetite-bearing radula of chitons. Chito… ▽ More Iron biomineralisation is critical for life. Nature capitalises on the physical attributes of iron biominerals for a variety of functional, structural and sensory applications. Although magnetism is an integral property of iron biominerals, the role it plays in their nano-assembly remains a fundamental, unanswered question. This is well exemplified by the magnetite-bearing radula of chitons. Chitons, a class of marine mollusc, create the hardest biomineral of any animal in their abrasion-resistant, self-sharpening teeth4. Despite this system being subjected to a range of high resolution imaging studies, the mechanisms that drive mineral assembly remain unresolved. However, the advent of quantum imaging technology provides a new avenue to probe magnetic structures directly. Here we use quantum magnetic microscopy, based on nitrogen-vacancy centres in diamond, to attain the first subcellular magnetic profiling of a eukaryotic system. Using complementary magnetic imaging protocols, we spatially map the principal mineral phases (ferrihydrite and magnetite) in the developing teeth of Acanthopleura hirtosa with submicron resolution. The images reveal previously undiscovered long-range magnetic order, established at the onset of magnetite mineralisation. This is in contrast to electron microscopy studies that show no strong common crystallographic orientation. The quantum-based magnetic profiling techniques presented in this work have broad application in biology, earth science, chemistry and materials engineering and can be applied across the range of systems for which iron is vital. △ Less

Submitted 28 February, 2019; v1 submitted 14 February, 2019; originally announced February 2019.

Non-neurotoxic Nanodiamond Probes for Intraneuronal Temperature Mapping

Authors: David A. Simpson, Emma Morrisroe, Julia M. McCoey, Alain H. Lombard, Dulini C. Mendis, Francois Treussart, Liam T. Hall, Steven Petrou, Lloyd C. L. Hollenberg

Abstract: Optical bio-markers have been used extensively for intracellular imaging with high spatial and temporal resolution. Extending the modality of these probes is a key driver in cell biology. In recent years, the NV centre in nanodiamond has emerged as a promising candidate for bio-imaging and bio-sensing with low cytotoxicity and stable photoluminescence. Here we study the electrophysiological effect… ▽ More Optical bio-markers have been used extensively for intracellular imaging with high spatial and temporal resolution. Extending the modality of these probes is a key driver in cell biology. In recent years, the NV centre in nanodiamond has emerged as a promising candidate for bio-imaging and bio-sensing with low cytotoxicity and stable photoluminescence. Here we study the electrophysiological effects of this quantum probe in primary cortical neurons. Multi-electrode array (MEA) recordings across five replicate studies showed no statistically significant difference in 25 network parameters when nanodiamonds are added at varying concentrations over various time periods 12-36 hr. The physiological validation motivates the second part of the study which demonstrates how the quantum properties of these biomarkers can be used to report intracellular information beyond their location and movement. Using the optically detected magnetic resonance from the nitrogen vacancy defects within the nanodiamonds we demonstrate enhanced signal-to-noise imaging and temperature mapping from thousands of nanodiamond probes simultaneously. This work establishes nanodiamonds as viable multi-functional intraneuronal sensors with nanoscale resolution, that may ultimately be used to detect magnetic and electrical activity at the membrane level in excitable cellular systems. △ Less

Submitted 22 April, 2018; originally announced April 2018.

Comments: 27 pages, 5 Figures

Journal ref: ACS Nano 11, 12077, 2017

Cascade circuit architecture for RF-photonic frequency multiplication with minimum RF energy

Authors: Mehedi Hasan, Karin Hinzer, Trevor Hall

Abstract: A general RF-photonic circuit design for implementing frequency multiplication is proposed. The circuit consists of N cascaded differentially-driven Mach-Zehnder modulators biased at the minimum transmission point with a progressive RF phase shift of 180/N applied to each stage. The frequency multiplication factor obtained is 2N. The novelty of the design is the reduced input RF energy required in… ▽ More A general RF-photonic circuit design for implementing frequency multiplication is proposed. The circuit consists of N cascaded differentially-driven Mach-Zehnder modulators biased at the minimum transmission point with a progressive RF phase shift of 180/N applied to each stage. The frequency multiplication factor obtained is 2N. The novelty of the design is the reduced input RF energy required in comparison to the functionally equivalent parallel MZM configuration. Using transfer matrix method, a N=3 architecture is modeled to obtain frequency sextupling. An industry standard simulation tool is used to verify the architectural concepts and analysis. The proposed design requires no optical or electrical filtering nor careful adjustment of the modulation index for correct operation. In addition, the overall intrinsic conversion efficiency of the N=3 cascade circuit is improved by 5 dB over a parallel MZM circuit. Finite MZM extinction and/or phase errors and power imbalances in the electric drive signals are also taken into consideration and their impact on overall performance investigated. The circuit can be integrated in any material platform that offers electro-optic modulators. △ Less

Submitted 18 April, 2018; originally announced April 2018.

Comments: 9 pages, 5 figures, 1 table

Proximity-induced artefacts in magnetic imaging with nitrogen-vacancy ensembles in diamond

Authors: J. -P. Tetienne, D. A. Broadway, S. E. Lillie, N. Dontschuk, T. Teraji, L. T. Hall, A. Stacey, D. A. Simpson, L. C. L. Hollenberg

Abstract: Magnetic imaging with ensembles of nitrogen-vacancy (NV) centres in diamond is a recently developed technique that allows for quantitative vector field mapping. Here we uncover a source of artefacts in the measured magnetic field in situations where the magnetic sample is placed in close proximity (a few tens of nm) to the NV sensing layer. Using magnetic nanoparticles as a test sample, we find th… ▽ More Magnetic imaging with ensembles of nitrogen-vacancy (NV) centres in diamond is a recently developed technique that allows for quantitative vector field mapping. Here we uncover a source of artefacts in the measured magnetic field in situations where the magnetic sample is placed in close proximity (a few tens of nm) to the NV sensing layer. Using magnetic nanoparticles as a test sample, we find that the measured field deviates significantly from the calculated field, in shape, amplitude and even in sign. By modelling the full measurement process, we show that these discrepancies are caused by the limited measurement range of NV sensors combined with the finite spatial resolution of the optical readout. We numerically investigate the role of the stand-off distance to identify an artefact-free regime, and discuss an application to ultrathin materials. This work provides a guide to predict and mitigate proximity-induced artefacts that can arise in NV-based wide-field magnetic imaging, and also demonstrates that the sensitivity of these artefacts to the sample can make them a useful tool for magnetic characterisation. △ Less

Submitted 26 March, 2018; originally announced March 2018.

Comments: Submitted to Sensors (Special Issue: Sensors based on Quantum Phenomena)

Journal ref: Sensors 18, 1290 (2018)

Thermal runaway in two-dimensional complex plasma crystals

Authors: Lénaïc Couëdel, V. Nosenko, M Rubin-Zuzic, S. Zhdanov, Y Elskens, T Hall, A Ivlev

Abstract: The full melting of a two-dimensional plasma crystal was induced in a principally stable monolayer by localized laser stimulation. Two distinct behaviors of the crystal after laser stimulation were observed depending on the amount of injected energy: (i) below a well-defined threshold, the laser melted area recrystallized; (ii) above the threshold, it expanded outwards in a similar fashion to mode… ▽ More The full melting of a two-dimensional plasma crystal was induced in a principally stable monolayer by localized laser stimulation. Two distinct behaviors of the crystal after laser stimulation were observed depending on the amount of injected energy: (i) below a well-defined threshold, the laser melted area recrystallized; (ii) above the threshold, it expanded outwards in a similar fashion to mode-coupling instability induced melting, rapidly destroying the crystalline order of the whole complex plasma monolayer. The reported experimental observations are due to the fluid mode-coupling instability which can pump energy into the particle monolayer at a rate surpassing the heat transport and damping rates in the energetic localized melted spot, resulting in its further growth. This behavior exhibits remarkable similarities with impulsive spot heating and thermal runaway (explosion) in ordinary reactive matter. △ Less

Submitted 15 December, 2017; originally announced December 2017.

Journal ref: Phys. Rev. E 97, 043206 (2018)

Effect of magnetic field on the phase transition in a dusty plasma

Authors: S. Jaiswal, T. Hall, S. LeBlanc, R. Mukherjee, E. Thomas

Abstract: The formation of self-consistent crystalline structure is a well-known phenomenon in complex plasmas. In most experiments the pressure and rf power are the main controlling parameters in determining the phase of the system. We have studied the effect of externally applied magnetic field on the configuration of plasma crystals, suspended in the sheath of a radio-frequency discharge using the Magnet… ▽ More The formation of self-consistent crystalline structure is a well-known phenomenon in complex plasmas. In most experiments the pressure and rf power are the main controlling parameters in determining the phase of the system. We have studied the effect of externally applied magnetic field on the configuration of plasma crystals, suspended in the sheath of a radio-frequency discharge using the Magnetized Dusty Plasma Experiment (MDPX) device. Experiments are performed at a fixed pressure and rf power where a crystalline structure is formed within a confining ring. The magnetic field is then increased from 0 to 1.28 T. We report on the breakdown of the crystalline structure with increasing magnetic field. The magnetic field affects the dynamics of the plasma particles and first leads to a rotation of the crystal. At higher magnetic field, there is a radial variation (shear) in the angular velocity of the moving particles which we believe leads to the melting of the crystal. This melting is confirmed by evaluating the variation of the pair correlation function as a function of magnetic field. △ Less

Submitted 12 September, 2017; originally announced September 2017.

Comments: 9 pages, 5 figures

Journal ref: Physics of Plasmas 24, 113703 (2017)

Quantum magnetic resonance microscopy

Authors: David A. Simpson, Robert G. Ryan, Liam T. Hall, Evgeniy Panchenko, Simon C. Drew, Steven Petrou, Paul S. Donnelly, Paul Mulvaney, Lloyd C. L. Hollenberg

Abstract: Magnetic resonance spectroscopy is universally regarded as one of the most important tools in chemical and bio-medical research. However, sensitivity limitations typically restrict imaging resolution to length scales greater than 10 μm. Here we bring quantum control to the detection of chemical systems to demonstrate high resolution electron spin imaging using the quantum properties of an array of… ▽ More Magnetic resonance spectroscopy is universally regarded as one of the most important tools in chemical and bio-medical research. However, sensitivity limitations typically restrict imaging resolution to length scales greater than 10 μm. Here we bring quantum control to the detection of chemical systems to demonstrate high resolution electron spin imaging using the quantum properties of an array of nitrogen-vacancy (NV) centres in diamond. Our quantum magnetic resonance microscope selectively images electronic spin species by precisely tuning a magnetic field to bring the quantum probes into resonance with the external target spins. This provides diffraction limited spatial resolution of the target spin species over a field of view of ~50x50 μm^2. We demonstrate imaging and spectroscopy on aqueous Cu2+ ions over microscopic volumes (0.025 μm^3), with detection sensitivity at resonance of 104 spins/voxel, ~100 zeptomol (10^-19 mol). The ability to image, perform spectroscopy and dynamically monitor spin-dependent redox reactions and transition metal biochemistry at these scales opens up a new realm of nanoscopic electron spin resonance and zepto-chemistry in the physical and life sciences. △ Less

Submitted 14 February, 2017; originally announced February 2017.

Comments: 15 pages, 5 figures

Detection of atomic spin labels in a lipid bi-layer using a single-spin nanodiamond probe

Authors: Stefan Kaufmann, David A. Simpson, Liam T. Hall, Viktor Perunicic, Philipp Senn, Steffen Steinert, Liam P. McGuinness, Brett C. Johnson, Takeshi Ohshima, Frank Caruso, Joerg Wrachtrup, Robert E. Scholten, Paul Mulvaney, Lloyd C. L. Hollenberg

Abstract: Magnetic field fluctuations arising from fundamental spins are ubiquitous in nanoscale biology, and are a rich source of information about the processes that generate them. However, the ability to detect the few spins involved without averaging over large ensembles has remained elusive. Here we demonstrate the detection of gadolinium spin labels in an artificial cell membrane under ambient conditi… ▽ More Magnetic field fluctuations arising from fundamental spins are ubiquitous in nanoscale biology, and are a rich source of information about the processes that generate them. However, the ability to detect the few spins involved without averaging over large ensembles has remained elusive. Here we demonstrate the detection of gadolinium spin labels in an artificial cell membrane under ambient conditions using a single-spin nanodiamond sensor. Changes in the spin relaxation time of the sensor located in the lipid bilayer were optically detected and found to be sensitive to near-individual proximal gadolinium atomic labels. The detection of such small numbers of spins in a model biological setting, with projected detection times of one second, opens a new pathway for in-situ nanoscale detection of dynamical processes in biology. △ Less

Submitted 13 April, 2013; originally announced April 2013.

Comments: 16 pages, 4 figures

Journal ref: Proceedings of the National Academy of Sciences,110 (27), 10894-10898, 2013

Nanoscale magnetometry through quantum control of nitrogen-vacancy centres in rotationally diffusing nanodiamonds

Authors: D. Maclaurin, L. T. Hall, A. M. Martin, L. C. L. Hollenberg

Abstract: The confluence of quantum physics and biology is driving a new generation of quantum-based sensing and imaging technology capable of harnessing the power of quantum effects to provide tools to understand the fundamental processes of life. One of the most promising systems in this area is the nitrogen-vacancy centre in diamond - a natural spin qubit which remarkably has all the right attributes for… ▽ More The confluence of quantum physics and biology is driving a new generation of quantum-based sensing and imaging technology capable of harnessing the power of quantum effects to provide tools to understand the fundamental processes of life. One of the most promising systems in this area is the nitrogen-vacancy centre in diamond - a natural spin qubit which remarkably has all the right attributes for nanoscale sensing in ambient biological conditions. Typically the nitrogen-vacancy qubits are fixed in tightly controlled/isolated experimental conditions. In this work quantum control principles of nitrogen-vacancy magnetometry are developed for a randomly diffusing diamond nanocrystal. We find that the accumulation of geometric phases, due to the rotation of the nanodiamond plays a crucial role in the application of a diffusing nanodiamond as a bio-label and magnetometer. Specifically, we show that a freely diffusing nanodiamond can offer real-time information about local magnetic fields and its own rotational behaviour, beyond continuous optically detected magnetic resonance monitoring, in parallel with operation as a fluorescent biomarker. △ Less

Submitted 22 July, 2012; originally announced July 2012.

Comments: 9 pages, with 5 figures

Journal ref: New Journal of Physics 15, 013041 (2013)

Monitoring Ion Channel Function In Real Time Through Quantum Decoherence

Authors: L. T. Hall, C. D. Hill, J. H. Cole, B. Städler, F. Caruso, P. Mulvaney, J. Wrachtrup, L. C. L. Hollenberg

Abstract: In drug discovery research there is a clear and urgent need for non-invasive detection of cell membrane ion channel operation with wide-field capability. Existing techniques are generally invasive, require specialized nano structures, or are only applicable to certain ion channel species. We show that quantum nanotechnology has enormous potential to provide a novel solution to this problem. The… ▽ More In drug discovery research there is a clear and urgent need for non-invasive detection of cell membrane ion channel operation with wide-field capability. Existing techniques are generally invasive, require specialized nano structures, or are only applicable to certain ion channel species. We show that quantum nanotechnology has enormous potential to provide a novel solution to this problem. The nitrogen-vacancy (NV) centre in nano-diamond is currently of great interest as a novel single atom quantum probe for nanoscale processes. However, until now, beyond the use of diamond nanocrystals as fluorescence markers, nothing was known about the quantum behaviour of a NV probe in the complex room temperature extra-cellular environment. For the first time we explore in detail the quantum dynamics of a NV probe in proximity to the ion channel, lipid bilayer and surrounding aqueous environment. Our theoretical results indicate that real-time detection of ion channel operation at millisecond resolution is possible by directly monitoring the quantum decoherence of the NV probe. With the potential to scan and scale-up to an array-based system this conclusion may have wide ranging implications for nanoscale biology and drug discovery. △ Less

Submitted 24 November, 2009; originally announced November 2009.

Comments: 7 pages, 6 figures

Journal ref: PNAS, published ahead of print October 11, 2010

SST and North American Tropical Cyclone Landfall: A Statistical Modeling Study

Authors: Timothy Hall, Stephen Jewson

Abstract: We employ a statistical model of North Atlantic tropical cyclone (TC) tracks to investigate the relationship between sea-surface temperature (SST) and North American TC landfall rates. The track model is conditioned on summer SST in the tropical North Atlantic being in either the 19 hottest or the 19 coldest years in the period 1950-2005. For each conditioning many synthetic TCs are generated an… ▽ More We employ a statistical model of North Atlantic tropical cyclone (TC) tracks to investigate the relationship between sea-surface temperature (SST) and North American TC landfall rates. The track model is conditioned on summer SST in the tropical North Atlantic being in either the 19 hottest or the 19 coldest years in the period 1950-2005. For each conditioning many synthetic TCs are generated and landfall rates computed. Compared to direct analysis of historical landfall, the track model reduces the sampling error by projecting information from the entire basin onto the coast. There are 46% more TCs in hot years than cold in the model, which is highly significant compared to random sampling and corroborates well documented trends in North Atlantic TC number in recent decades. In the absence of other effects, this difference results in a significant increase in model landfall rates in hot years, uniform along the coast. Hot-cold differences in the geographic distribution of genesis and in TC propagation do not significantly alter the overall landfall-rate difference in the model, and the net landfall rate is 1/4.7 yr in hot years and 1/3.1 yr in cold years. SST influence on genesis site and propagation does modify the geographic distribution of landfall, however. The Yucatan suffers 3 times greater landfall rate in hot years than cold, while the U.S. mid-Atlantic coast exhibits no significant change. Landfall probabilities increase in hot years compared to all years in Florida, the U.S Gulf coast, the Mexican Gulf coast, and Yucatan with at least 95% confidence. △ Less

Submitted 7 January, 2008; originally announced January 2008.

Predicting hurricane regional landfall rates: comparing local and basin-wide track model approaches

Authors: Tim Hall, Stephen Jewson

Abstract: We compare two methods for making predictions of the climatological distribution of the number of hurricanes making landfall along short sections of the North American coastline. The first method uses local data, and the second method uses a basin-wide track model. Using cross-validation we show that the basin-wide track model gives better predictions for almost all parts of the coastline. This… ▽ More We compare two methods for making predictions of the climatological distribution of the number of hurricanes making landfall along short sections of the North American coastline. The first method uses local data, and the second method uses a basin-wide track model. Using cross-validation we show that the basin-wide track model gives better predictions for almost all parts of the coastline. This is the first time such a comparison has been made, and is the first rigourous justification for the use of basin-wide track models for predicting hurricane landfall rates and hurricane risk. △ Less

Submitted 10 November, 2006; originally announced November 2006.

Comparing classical and Bayesian methods for predicting hurricane landfall rates

Authors: Tim Hall, Stephen Jewson

Abstract: We compare classical and Bayesian methods for fitting the poisson distribution to the number of hurricanes making landfall on sections of the US coastline. We compare classical and Bayesian methods for fitting the poisson distribution to the number of hurricanes making landfall on sections of the US coastline. △ Less

Submitted 1 November, 2006; originally announced November 2006.

Dangerous human-made interference with climate: A GISS modelE study

Authors: J. Hansen, M. Sato, R. Ruedy, P. Kharecha, A. Lacis, R. Miller, L. Nazarenko, K. Lo, G. A. Schmidt, G. Russell, I. Aleinov, S. Bauer, E. Baum, B. Cairns, V. Canuto, M. Chandler, Y. Cheng, A. Cohen, A. Del Genio, G. Faluvegi, E. Fleming, A. Friend, T. Hall, C. Jackman, J. Jonas , et al. (22 additional authors not shown)

Abstract: We investigate the issue of "dangerous human-made interference with climate" using simulations with GISS modelE driven by measured or estimated forcings for 1880-2003 and extended to 2100 for IPCC greenhouse gas scenarios as well as the 'alternative' scenario of Hansen and Sato. Identification of 'dangerous' effects is partly subjective, but we find evidence that added global warming of more tha… ▽ More We investigate the issue of "dangerous human-made interference with climate" using simulations with GISS modelE driven by measured or estimated forcings for 1880-2003 and extended to 2100 for IPCC greenhouse gas scenarios as well as the 'alternative' scenario of Hansen and Sato. Identification of 'dangerous' effects is partly subjective, but we find evidence that added global warming of more than 1 degree C above the level in 2000 has effects that may be highly disruptive. The alternative scenario, with peak added forcing ~1.5 W/m2 in 2100, keeps further global warming under 1 degree C if climate sensitivity is \~3 degrees C or less for doubled CO2. We discuss three specific sub-global topics: Arctic climate change, tropical storm intensification, and ice sheet stability. Growth of non-CO2 forcings has slowed in recent years, but CO2 emissions are now surging well above the alternative scenario. Prompt actions to slow CO2 emissions and decrease non-CO2 forcings are needed to achieve the low forcing of the alternative scenario. △ Less

Submitted 16 October, 2006; originally announced October 2006.

Comments: 21 pages; 10 figures; to be submitted to Atmospheric Chemistry and Physics

Journal ref: Rev. text publ. in Atmospheric Chemistry and Physics, 7, 2287-2312 (2007)

Climate simulations for 1880-2003 with GISS modelE

Authors: J. Hansen, M. Sato, R. Ruedy, P. Kharecha, A. Lacis, R. Miller, L. Nazarenko, K. Lo, G. A. Schmidt, G. Russell, I. Aleinov, S. Bauer, E. Baum, B. Cairns, V. Canuto, M. Chandler, Y. Cheng, A. Cohen, A. Del Genio, G. Faluvegi, E. Fleming, A. Friend, T. Hall, C. Jackman, J. Jonas , et al. (22 additional authors not shown)

Abstract: We carry out climate simulations for 1880-2003 with GISS modelE driven by ten measured or estimated climate forcings. An ensemble of climate model runs is carried out for each forcing acting individually and for all forcing mechanisms acting together. We compare side-by-side simulated climate change for each forcing, all forcings, observations, unforced variability among model ensemble members,… ▽ More We carry out climate simulations for 1880-2003 with GISS modelE driven by ten measured or estimated climate forcings. An ensemble of climate model runs is carried out for each forcing acting individually and for all forcing mechanisms acting together. We compare side-by-side simulated climate change for each forcing, all forcings, observations, unforced variability among model ensemble members, and, if available, observed variability. Discrepancies between observations and simulations with all forcings are due to model deficiencies, inaccurate or incomplete forcings, and imperfect observations. Although there are notable discrepancies between model and observations, the fidelity is sufficient to encourage use of the model for simulations of future climate change. By using a fixed well-documented model and accurately defining the 1880-2003 forcings, we aim to provide a benchmark against which the effect of improvements in the model, climate forcings, and observations can be tested. Principal model deficiencies include unrealistically weak tropical El Nino-like variability and a poor distribution of sea ice, with too much sea ice in the Northern Hemisphere and too little in the Southern Hemisphere. The greatest uncertainties in the forcings are the temporal and spatial variations of anthropogenic aerosols and their indirect effects on clouds. △ Less

Submitted 11 April, 2007; v1 submitted 16 October, 2006; originally announced October 2006.

Comments: 44 pages; 19 figures; Final text accepted by Climate Dynamics

Journal ref: Publ. in Clim. Dynam., 29, 661-696 (2007)

Statistical modelling of tropical cyclone tracks: non-normal innovations

Authors: Tim Hall, Stephen Jewson

Abstract: We present results from the sixth stage of a project to build a statistical hurricane model. Previous papers have described our modelling of the tracks, genesis, and lysis of hurricanes. In our track model we have so far employed a normal distribution for the residuals when computing innovations, even though we have demonstrated that their distribution is not normal. Here, we test to see if the… ▽ More We present results from the sixth stage of a project to build a statistical hurricane model. Previous papers have described our modelling of the tracks, genesis, and lysis of hurricanes. In our track model we have so far employed a normal distribution for the residuals when computing innovations, even though we have demonstrated that their distribution is not normal. Here, we test to see if the track model can be improved by including more realistic non-normal innovations. The results are mixed. Some features of the model improve, but others slightly worsen. △ Less

Submitted 15 December, 2005; originally announced December 2005.

Statistical modelling of tropical cyclone tracks: modelling cyclone lysis

Authors: Tim Hall, Stephen Jewson

Abstract: We describe results from the fifth stage of a project to build a statistical model of tropical cyclone tracks. The previous stages considered genesis and the shape of tracks. We now consider in more detail how to represent the lysis (death) of tropical cyclones. Improving the lysis model turns out to bring a significant improvement to the track model overall. We describe results from the fifth stage of a project to build a statistical model of tropical cyclone tracks. The previous stages considered genesis and the shape of tracks. We now consider in more detail how to represent the lysis (death) of tropical cyclones. Improving the lysis model turns out to bring a significant improvement to the track model overall. △ Less

Submitted 10 December, 2005; originally announced December 2005.

Statistical modelling of tropical cyclone genesis: a non-parametric model for the annual distribution

Authors: Tim Hall, Stephen Jewson

Abstract: As part of a project to develop more accurate estimates of the risks due to tropical cyclones, we describe a non-parametric method for the statistical simulation of the location of tropical cyclone genesis. The method avoids the use of arbitrary grid boxes, and the spatial smoothing of the historical data is constructed optimally according to a clearly defined merit function. As part of a project to develop more accurate estimates of the risks due to tropical cyclones, we describe a non-parametric method for the statistical simulation of the location of tropical cyclone genesis. The method avoids the use of arbitrary grid boxes, and the spatial smoothing of the historical data is constructed optimally according to a clearly defined merit function. △ Less

Submitted 22 October, 2005; originally announced October 2005.

Statistical modelling of tropical cyclone tracks: modelling the autocorrelation in track shape

Authors: Tim Hall, Stephen Jewson

Abstract: We describe results from the third stage of a project to build a statistical model for hurricane tracks. In the first stage we modelled the unconditional mean track. In the second stage we modelled the unconditional variance of fluctuations around the mean. Now we address the question of how to model the autocorrelations in the standardised fluctuations. We perform a thorough diagnostic analysis… ▽ More We describe results from the third stage of a project to build a statistical model for hurricane tracks. In the first stage we modelled the unconditional mean track. In the second stage we modelled the unconditional variance of fluctuations around the mean. Now we address the question of how to model the autocorrelations in the standardised fluctuations. We perform a thorough diagnostic analysis of these fluctuations, and fit a type of AR(1) model. We then assess the goodness of fit of this model in a number of ways, including an out-of-sample comparison with a simpler model, an in-sample residual analysis, and a comparison of simulated tracks from the model with the observed tracks. Broadly speaking, the model captures the behaviour of observed hurricane tracks. In detail, however, there are a number of systematic errors. △ Less

Submitted 3 September, 2005; originally announced September 2005.

Statistical modelling of tropical cyclone tracks: a comparison of models for the variance of trajectories

Authors: Tim Hall, Stephen Jewson

Abstract: We describe results from the second stage of a project to build a statistical model for hurricane tracks. In the first stage we modelled the unconditional mean track. We now attempt to model the unconditional variance of fluctuations around the mean. The variance models we describe use a semi-parametric nearest neighbours approach in which the optimal averaging length-scale is estimated using a… ▽ More We describe results from the second stage of a project to build a statistical model for hurricane tracks. In the first stage we modelled the unconditional mean track. We now attempt to model the unconditional variance of fluctuations around the mean. The variance models we describe use a semi-parametric nearest neighbours approach in which the optimal averaging length-scale is estimated using a jack-knife out-of-sample fitting procedure. We test three different models. These models consider the variance structure of the deviations from the unconditional mean track to be isotropic, anisotropic but uncorrelated, and anisotropic and correlated, respectively. The results show that, of these models, the anisotropic correlated model gives the best predictions of the distribution of future positions of hurricanes. △ Less

Submitted 15 May, 2005; originally announced May 2005.

Statistical modelling of tropical cyclone tracks: a semi-parametric model for the mean trajectory

Authors: Tim Hall, Stephen Jewson

Abstract: We present a statistical model for the unconditional mean tracks of hurricanes. Our model is a semi-parametric scheme that averages together observed hurricane displacements. It has a single parameter that defines the averaging length scale, and we derive the optimum value for this parameter using a jackknife. The main purpose of this model is as a starting point for developing a statistical mod… ▽ More We present a statistical model for the unconditional mean tracks of hurricanes. Our model is a semi-parametric scheme that averages together observed hurricane displacements. It has a single parameter that defines the averaging length scale, and we derive the optimum value for this parameter using a jackknife. The main purpose of this model is as a starting point for developing a statistical model of hurricanes for use in the estimation of the wind, rainfall and flooding risks. The model also acts as an optimal filtering tool for estimating mean hurricane tracks. △ Less

Submitted 31 March, 2005; originally announced March 2005.