-
Stable beam operation of approximately 1 mA beam under highly efficient energy recovery conditions at compact energy-recovery linac
Authors:
Hiroshi Sakai,
Dai Arakawa,
Takaaki Furuya,
Kaiichi Haga,
Masayuki Hagiwara,
Kentaro Harada,
Yosuke Honda,
Teruya Honma,
Eiji Kako,
Ryukou Kato,
Yuuji Kojima,
Taro Konomi,
Hiroshi Matsumura,
Taichi Miura,
Takako Miura,
Shinya Nagahashi,
Hirotaka Nakai,
Norio Nakamura,
Kota Nakanishi,
Kazuyuki Nigorikawa,
Takashi Nogami,
Takashi Obina,
Feng Qiu,
Hidenori Sagehashi,
Shogo Sakanaka
, et al. (15 additional authors not shown)
Abstract:
A compact energy-recovery linac (cERL) has been un-der construction at KEK since 2009 to develop key technologies for the energy-recovery linac. The cERL began operating in 2013 to create a high-current beam with a low-emittance beam with stable continuous wave (CW) superconducting cavities. Owing to the development of critical components, such as the DC gun, superconducting cavities, and the desi…
▽ More
A compact energy-recovery linac (cERL) has been un-der construction at KEK since 2009 to develop key technologies for the energy-recovery linac. The cERL began operating in 2013 to create a high-current beam with a low-emittance beam with stable continuous wave (CW) superconducting cavities. Owing to the development of critical components, such as the DC gun, superconducting cavities, and the design of ideal beam transport optics, we have successfully established approximately 1 mA stable CW operation with a small beam emittance and extremely small beam loss. This study presents the details of our key technologies and experimental results for achieving 100% energy recovery operation with extremely small beam loss during a stable, approximately 1 mA CW beam operation.
△ Less
Submitted 24 August, 2024;
originally announced August 2024.
-
Photoemission Orbital Tomography Using Robust Sparse PhaseLift
Authors:
Kaori Niki,
Rena Asano,
Ryuji Sakanoue,
Manabu Hagiwara,
Kazushi Mimura
Abstract:
Photoemission orbital tomography (POT) from photoelectron momentum maps (PMMs) has enabled detailed analysis of the shape and energy of molecular orbitals in the adsorbed state. This study proposes a new POT method based on the PhaseLift. Molecular orbitals, including three-dimensional phases, can be identified from a single PMM by actively providing atomic positions and basis. Moreover, our metho…
▽ More
Photoemission orbital tomography (POT) from photoelectron momentum maps (PMMs) has enabled detailed analysis of the shape and energy of molecular orbitals in the adsorbed state. This study proposes a new POT method based on the PhaseLift. Molecular orbitals, including three-dimensional phases, can be identified from a single PMM by actively providing atomic positions and basis. Moreover, our method is robust to noise and can perfectly discriminate adsorption-induced molecular deformations with an accuracy of 0.05 [angstrom]. Our new method enables simultaneous analysis of the three-dimensional shapes of molecules and molecular orbitals and thus paves the way for advanced quantum-mechanical interpretation of adsorption-induced electronic state changes and photo-excited inter-molecular interactions.
△ Less
Submitted 23 July, 2023;
originally announced July 2023.
-
Tensile behavior of dual-phase titanium alloys under high-intensity proton beam exposure: radiation-induced omega phase transformation in Ti-6Al-4V
Authors:
Taku Ishida,
Eiichi Wakai,
Shunsuke Makimura,
Andrew M. Casella,
Danny J. Edwards,
Ramprashad Prabhakaran,
David J. Senor,
Kavin Ammigan,
Sujit Bidhar,
Patrick G. Hurh,
Frederique Pellemoine,
Christopher J. Densham,
Michael D. Fitton,
Joe M. Bennett,
Dohyun Kim,
Nikolaos Simos,
Masayuki Hagiwara,
Naritoshi Kawamura,
Shin-ichiro Meigo,
Katsuya Yonehara
Abstract:
A high-intensity proton beam exposure with 181 MeV energy has been conducted at Brookhaven Linac Isotope Producer facility on various material specimens for accelerator targetry applications, including titanium alloys as a beam window material. The radiation damage level of the analyzed capsule was 0.25 dpa at beam center region with an irradiation temperature around 120 degree C. Tensile tests sh…
▽ More
A high-intensity proton beam exposure with 181 MeV energy has been conducted at Brookhaven Linac Isotope Producer facility on various material specimens for accelerator targetry applications, including titanium alloys as a beam window material. The radiation damage level of the analyzed capsule was 0.25 dpa at beam center region with an irradiation temperature around 120 degree C. Tensile tests showed increased hardness and a large decrease in ductility for the dual alpha+beta-phase Ti-6Al-4V Grade-5 and Grade-23 extra low interstitial alloys, with the near alpha-phase Ti-3Al-2.5V Grade-9 alloy still exhibiting uniform elongation of a few % after irradiation. Transmission Electron Microscope analyses on Ti-6Al-4V indicated clear evidence of a high-density of defect clusters with size less than 2 nm in each alpha-phase grain. The beta-phase grains did not contain any visible defects such as loops or black dots, while the diffraction patterns clearly indicated omega-phase precipitation in an advanced formation stage. The radiation-induced omega-phase transformation in the beta-phase could lead to greater loss of ductility in Ti-6Al-4V alloys in comparison with Ti-3Al-2.5V alloy with less beta-phase.
△ Less
Submitted 30 July, 2020; v1 submitted 24 April, 2020;
originally announced April 2020.
-
Development and operational experience of magnetic horn system for T2K experiment
Authors:
T. Sekiguchi,
K. Bessho,
Y. Fujii,
M. Hagiwara,
T. Hasegawa,
K. Hayashi,
T. Ishida,
T. Ishii,
H. Kobayashi,
T. Kobayashi,
S. Koike,
K. Koseki,
T. Maruyama,
H. Matsumoto,
T. Nakadaira,
K. Nakamura,
K. Nakayoshi,
K. Nishikawa,
Y. Oyama,
K. Sakashita,
M. Shibata,
Y. Suzuki,
M. Tada,
K. Takahashi,
T. Tsukamoto
, et al. (12 additional authors not shown)
Abstract:
A magnetic horn system to be operated at a pulsed current of 320 kA and to survive high-power proton beam operation at 750 kW was developed for the T2K experiment. The first set of T2K magnetic horns was operated for over 12 million pulses during the four years of operation from 2010 to 2013, under a maximum beam power of 230 kW, and $6.63\times10^{20}$ protons were exposed to the production targe…
▽ More
A magnetic horn system to be operated at a pulsed current of 320 kA and to survive high-power proton beam operation at 750 kW was developed for the T2K experiment. The first set of T2K magnetic horns was operated for over 12 million pulses during the four years of operation from 2010 to 2013, under a maximum beam power of 230 kW, and $6.63\times10^{20}$ protons were exposed to the production target. No significant damage was observed throughout this period. This successful operation of the T2K magnetic horns led to the discovery of the $ν_μ\rightarrowν_e$ oscillation phenomenon in 2013 by the T2K experiment. In this paper, details of the design, construction, and operation experience of the T2K magnetic horns are described.
△ Less
Submitted 5 February, 2015;
originally announced February 2015.
-
JASMIN: Japanese-American study of muon interactions and neutron detection
Authors:
Hiroshi Nakashima,
N. V. Mokhov,
Yoshimi Kasugai,
Norihiro Matsuda,
Yosuke Iwamoto,
Yukio Sakamoto,
Anthony F. Leveling,
David J. Boehnlein,
Kamran Vaziri,
Hiroshi Matsumura,
Masayuki Hagiwara,
Hiroshi Iwase,
Syuichi Ban,
Hideo Hirayama,
Takashi Nakamura,
Koji Oishi,
Nobuhiro Shigyo,
Hiroyuki Arakawa,
Tsuyoshi Kajimoto,
Kenji Ishibashi,
Hiroshi Yashima,
Shun Sekimoto,
Norikazu Kinoshita,
Hee-Seock Lee,
Koji Niita
Abstract:
Experimental studies of shielding and radiation effects at Fermi National Accelerator Laboratory (FNAL) have been carried out under collaboration between FNAL and Japan, aiming at benchmarking of simulation codes and study of irradiation effects for upgrade and design of new high-energy accelerator facilities. The purposes of this collaboration are (1) acquisition of shielding data in a proton bea…
▽ More
Experimental studies of shielding and radiation effects at Fermi National Accelerator Laboratory (FNAL) have been carried out under collaboration between FNAL and Japan, aiming at benchmarking of simulation codes and study of irradiation effects for upgrade and design of new high-energy accelerator facilities. The purposes of this collaboration are (1) acquisition of shielding data in a proton beam energy domain above 100 GeV; (2) further evaluation of predictive accuracy of the PHITS and MARS codes; (3) modification of physics models and data in these codes if needed; (4) establishment of irradiation field for radiation effect tests; and (5) development of a code module for improved description of radiation effects. A series of experiments has been performed at the Pbar target station and NuMI facility, using irradiation of targets with 120 GeV protons for antiproton and neutrino production, as well as the M-test beam line (M-test) for measuring nuclear data and detector responses. Various nuclear and shielding data have been measured by activation methods with chemical separation techniques as well as by other detectors such as a Bonner ball counter. Analyses with the experimental data are in progress for benchmarking the PHITS and MARS15 codes. In this presentation recent activities and results are reviewed.
△ Less
Submitted 9 February, 2012;
originally announced February 2012.
-
Neutron energy spectrum from 120 GeV protons on a thick copper target
Authors:
Nobuhiro Shigyo,
Toshiya Sanami,
Tsuyoshi Kajimoto,
Yosuke Iwamoto,
Masayuki Hagiwara,
Kiwamu Saito,
Kenji Ishibashi,
Hiroshi Nakashima,
Yukio Sakamoto,
Hee-Seock Lee,
Erik Ramberg,
Aria A. Meyhoefer,
Rick Coleman,
Doug Jensen,
Anthony F. Leveling,
David J. Boehnlein,
Nikolai V. Mokhov
Abstract:
Neutron energy spectrum from 120 GeV protons on a thick copper target was measured at the Meson Test Beam Facility (MTBF) at Fermi National Accelerator Laboratory. The data allows for evaluation of neutron production process implemented in theoretical simulation codes. It also helps exploring the reasons for some disagreement between calculation results and shielding benchmark data taken at high e…
▽ More
Neutron energy spectrum from 120 GeV protons on a thick copper target was measured at the Meson Test Beam Facility (MTBF) at Fermi National Accelerator Laboratory. The data allows for evaluation of neutron production process implemented in theoretical simulation codes. It also helps exploring the reasons for some disagreement between calculation results and shielding benchmark data taken at high energy accelerator facilities, since it is evaluated separately from neutron transport. The experiment was carried out using a 120 GeV proton beam of 3E5 protons/spill. Since the spill duration was 4 seconds, proton-induced events were counted pulse by pulse. The intensity was maintained using diffusers and collimators installed in the beam line to MTBF. The protons hit a copper block target the size of which is 5cm x 5cm x 60 cm long. The neutrons produced in the target were measured using NE213 liquid scintillator detectors, placed about 5.5 m away from the target at 30^{\circ} and 5 m 90^{\circ} with respect to the proton beam axis. The neutron energy was determined by time-of-flight technique using timing difference between the NE213 and a plastic scintillator located just before the target. Neutron detection efficiency of NE213 was determined on basis of experimental data from the high energy neutron beam line at Los Alamos National Laboratory. The neutron spectrum was compared with the results of multi-particle transport codes to validate the implemented theoretical models. The apparatus would be applied to future measurements to obtain a systematic data set for secondary particle production on various target materials.
△ Less
Submitted 7 February, 2012;
originally announced February 2012.
