Showing 1–15 of 15 results for author: Gys, T

The LHCb upgrade I

Authors: LHCb collaboration, R. Aaij, A. S. W. Abdelmotteleb, C. Abellan Beteta, F. Abudinén, C. Achard, T. Ackernley, B. Adeva, M. Adinolfi, P. Adlarson, H. Afsharnia, C. Agapopoulou, C. A. Aidala, Z. Ajaltouni, S. Akar, K. Akiba, P. Albicocco, J. Albrecht, F. Alessio, M. Alexander, A. Alfonso Albero, Z. Aliouche, P. Alvarez Cartelle, R. Amalric, S. Amato , et al. (1298 additional authors not shown)

Abstract: The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select… ▽ More The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. △ Less

Submitted 10 September, 2024; v1 submitted 17 May, 2023; originally announced May 2023.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2022-002.html (LHCb public pages)

Report number: LHCb-DP-2022-002

Journal ref: JINST 19 (2024) P05065

Performance of a prototype TORCH time-of-flight detector

Authors: Srishti Bhasin, Thomas Blake, Nicholas Brook, Maria Flavia Cicala, Thomas Conneely, David Cussans, Maarten van Dijk, Roger Forty, Christoph Frei, Emmy Gabriel, Rui Gao, Timothy Gershon, Thierry Gys, Tom Hadavizadeh, Thomas Hancock, Thomas Jones, Neville Harnew, Michal Kreps, James Milnes, Didier Piedigrossi, Jonas Rademacker, Jennifer Clare Smallwood

Abstract: TORCH is a novel time-of-flight detector, designed to provide charged particle identification of pions, kaons and protons in the momentum range 2-20 GeV/c over a 9.5 m flight path. A detector module, comprising a 10mm thick quartz plate, provides a source of Cherenkov photons which propagate via total internal reflection to one end of the plate. Here, the photons are focused onto an array of custo… ▽ More TORCH is a novel time-of-flight detector, designed to provide charged particle identification of pions, kaons and protons in the momentum range 2-20 GeV/c over a 9.5 m flight path. A detector module, comprising a 10mm thick quartz plate, provides a source of Cherenkov photons which propagate via total internal reflection to one end of the plate. Here, the photons are focused onto an array of custom-designed Micro-Channel Plate Photo-Multiplier Tubes (MCP-PMTs) which measure their positions and arrival times. The target time resolution per photon is 70 ps which, for 30 detected photons per charged particle, results in a 10-15 ps time-of-flight resolution. A 1.25 m length TORCH prototype module employing two MCP-PMTs has been developed, and tested at the CERN PS using a charged hadron beam of 8 GeV/c momentum. The construction of the module, the properties of the MCP-PMTs and the readout electronics are described. Measurements of the collected photon yields and single-photon time resolutions have been performed as a function of particle entry points on the plate and compared to expectations. These studies show that the performance of the TORCH prototype approaches the design goals for the full-scale detector. △ Less

Submitted 8 March, 2023; v1 submitted 27 September, 2022; originally announced September 2022.

Comments: 18 pages, 16 figures, to be published in Nucl. Instrum. Methods A. During review, clarity added to description throughout; updated figures 15 and 16; revised argument in section 6.3

Performance of the LHCb RICH detectors during LHC Run 2

Authors: R. Calabrese, M. Fiorini, E. Luppi, L. Minzoni, I. Slazyk, L. Tomassetti, M. Bartolini, R. Cardinale, F. Fontanelli, A. Petrolini, A. Pistone, M. Calvi, C. Matteuzzi, A. Lupato, G. Simi, M. Kucharczyk, B. Malecki, M. Witek, S. Benson, M. Blago, G. Cavallero, A. Contu, C. D'Ambrosio, C. Frei, T. Gys , et al. (57 additional authors not shown)

Abstract: The performance of the ring-imaging Cherenkov detectors at the LHCb experiment is determined during the LHC Run 2 period between 2015 and 2018. The stability of the Cherenkov angle resolution and number of detected photons with time and running conditions is measured. The particle identification performance is evaluated with data and found to satisfy the requirements of the physics programme. The performance of the ring-imaging Cherenkov detectors at the LHCb experiment is determined during the LHC Run 2 period between 2015 and 2018. The stability of the Cherenkov angle resolution and number of detected photons with time and running conditions is measured. The particle identification performance is evaluated with data and found to satisfy the requirements of the physics programme. △ Less

Submitted 26 May, 2022; originally announced May 2022.

Report number: LHCb-DP-2021-004

Picosecond timing of charged particles using the TORCH detector

Authors: Maria Flavia Cicala, Srishti Bhasin, Thomas Blake, Nick H. Brook, Thomas Conneely, David Cussans, Maarten W. U. van Dijk, Roger Forty, Christoph Frei, Emmy P. M. Gabriel, Rui Gao, Timothy Gershon, Thierry Gys, Thomas Hadavizadeh, Thomas Henry Hancock, Neville Harnew, Thomas Jones, Michal Kreps, James Milnes, Didier Piedigrossi, Jonas Rademacker, Jennifer Clare Smallwood

Abstract: TORCH is a large-area, high-precision time-of-flight (ToF) detector designed to provide charged-particle identification in the 2-20 GeV$/c$ momentum range. Prompt Cherenkov photons emitted by charged hadrons as they traverse a 10mm quartz radiator are propagated to the periphery of the detector, where they are focused onto an array of micro-channel plate photomultiplier tubes (MCP-PMTs). The posit… ▽ More TORCH is a large-area, high-precision time-of-flight (ToF) detector designed to provide charged-particle identification in the 2-20 GeV$/c$ momentum range. Prompt Cherenkov photons emitted by charged hadrons as they traverse a 10mm quartz radiator are propagated to the periphery of the detector, where they are focused onto an array of micro-channel plate photomultiplier tubes (MCP-PMTs). The position and arrival times of the photons are used to infer the particles' time of entry in the radiator, to identify hadrons based on their ToF. The MCP-PMTs were developed with an industrial partner to satisfy the stringent requirements of the TORCH detector. The requirements include a finely segmented anode, excellent time resolution, and a long lifetime. Over an approximately 10m flight distance, the difference in ToF between a kaon and a pion with 10GeV$/c$ momentum is 35ps, leading to a 10-15ps per track timing resolution requirement. On average 30 photons per hadron are detected, which translates to a single-photon time resolution of 70ps. The TORCH research and development program aims to demonstrate the validity of the detector concept through laboratory and beam tests, results from which are presented. A timing resolution of 70-100ps was reached in beam tests, approaching the TORCH design goal. Laboratory timing tests consist of operating the MCP-PMTs coupled to the TORCH readout electronics. A time resolution of about 50ps was measured, meeting the TORCH target timing resolution. △ Less

Submitted 25 March, 2022; originally announced March 2022.

Comments: Vienna Instrumentation Conference 2022 proceedings. 13 pages,5 figures, 1 table

Test-beam demonstration of a TORCH prototype module

Authors: J. C. Smallwood, S. Bhasin, T. Blake, N. H. Brook, M. F. Cicala, T. Conneely, D. Cussans, M. W. U. van Dijk, R. Forty, C. Frei, E. P. M. Gabriel, R. Gao, T. Gershon, T. Gys, T. Hadavizadeh, T. H. Hancock, N. Harnew, M. Kreps, J. Milnes, D. Piedigrossi, J. Rademacker

Abstract: The TORCH time-of-flight detector is designed to provide a 15 ps timing resolution for charged particles, resulting in $π$/$K$ particle identification up to 10 GeV/c momentum over a 10 m flight path. Cherenkov photons, produced in a quartz plate of 10 mm thickness, are focused onto an array of micro-channel plate photomultipliers (MCP-PMTs) which measure the photon arrival times and spatial positi… ▽ More The TORCH time-of-flight detector is designed to provide a 15 ps timing resolution for charged particles, resulting in $π$/$K$ particle identification up to 10 GeV/c momentum over a 10 m flight path. Cherenkov photons, produced in a quartz plate of 10 mm thickness, are focused onto an array of micro-channel plate photomultipliers (MCP-PMTs) which measure the photon arrival times and spatial positions. A half-scale ($660\times1250\times10$ mm$^3$) TORCH demonstrator module has been tested in an 8 GeV/c mixed proton-pion beam at CERN. Customised square MCP-PMTs of active area $53\times53$ mm$^2$ and granularity $64\times64$ pixels have been employed, which have been developed in collaboration with an industrial partner. The single-photon timing performance and photon yields have been measured as a function of beam position in the radiator, giving measurements which are consistent with expectations. The expected performance of TORCH for high luminosity running of the LHCb Upgrade II has been simulated. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Comments: 6 pages, 6 figures, Proceedings of the TIPP2021 Conference, TRIUMF, 24 - 28 May 2021, submitted to IoP Conference Series

Characterisation of signal-induced noise in Hamamatsu R11265 Multianode Photomultiplier Tubes

Authors: M. Andreotti, S. Capelli, G. Cavallero, S. Chiozzi, A. Cotta Ramusino, C. D'Ambrosio, M. Fiorini, E. Franzoso, C. Frei, S. Gallorini, S. Gambetta, C. Giugliano, C. Gotti, T. Gys, F. Keizer, M. Maino, B. Malecki, L. Minzoni, S. Mitchell, I. Neri, A. Petrolini, D. Piedigrossi, G. Robertson, A. Sergi, G. Simi , et al. (4 additional authors not shown)

Abstract: Signal-induced noise is observed in Hamamatsu R11265 Multianode Photomultiplier Tubes, manifesting up to several microseconds after the single photoelectron response signal and localised in specific anodes. The mean number of noise pulses varies between devices, and shows significant dependence on the applied high-voltage. The characterisation of this noise and the mitigation strategies to perform… ▽ More Signal-induced noise is observed in Hamamatsu R11265 Multianode Photomultiplier Tubes, manifesting up to several microseconds after the single photoelectron response signal and localised in specific anodes. The mean number of noise pulses varies between devices, and shows significant dependence on the applied high-voltage. The characterisation of this noise and the mitigation strategies to perform optimal single-photon counting at 40 MHz, as required by the LHCb Ring-Imaging Cherenkov detectors, are reported. △ Less

Submitted 23 November, 2021; v1 submitted 2 October, 2021; originally announced October 2021.

Report number: CERN-LHCb-DP-2021-005

Journal ref: JINST 16 (2021) P11030

Status of the TORCH Project

Authors: N. Harnew, S. Bhasin, T. Blake, N. H. Brook, M. F. Cicala, T. Conneely, D. Cussans, M. W. U. vanDijk, R. Forty, C. Frei, E. P. M. Gabriel, R. Gao, T. Gershon, T. Gys, T. Hadavizadeh, T. H. Hancock, M. Kreps, J. Milnes, D. Piedigrossi, J. Rademacker

Abstract: The TORCH time-of-flight detector will provide particle identification between 2-10 GeV/c momentum over a flight distance of 10 m, and is designed for large-area coverage, up to 30 m^2. A 15 ps time-of-flight resolution per incident particle is anticipated by measuring the arrival times from Cherenkov photons produced in a synthetic fused silica radiator plate of 10 mm thickness. Customised Micro-… ▽ More The TORCH time-of-flight detector will provide particle identification between 2-10 GeV/c momentum over a flight distance of 10 m, and is designed for large-area coverage, up to 30 m^2. A 15 ps time-of-flight resolution per incident particle is anticipated by measuring the arrival times from Cherenkov photons produced in a synthetic fused silica radiator plate of 10 mm thickness. Customised Micro-Channel Plate Photomultiplier Tube (MCP-PMT) photon detectors of 53 x 53 mm^2 active area with a 64 x 64 granularity have been developed with industrial partners. Test-beam studies using both a small-scale TORCH demonstrator and a half-length TORCH module are presented. The desired timing resolution of 70 ps per single photon is close to being achieved. △ Less

Submitted 6 March, 2020; originally announced March 2020.

Comments: 10 pages, 9 figures. Proceedings of the DIRC2019 Workshop, Castle Rauischholzhausen 11-13 Sept 2019. arXiv admin note: substantial text overlap with arXiv:1810.06658

Test-beam studies of a small-scale TORCH time-of-flight demonstrator

Authors: S. Bhasin, T. Blake, N. Brook, T. Conneely, D. Cussans, R. Forty, C. Frei, E. P. M. Gabriel, R. Gao, T. Gershon, T. Gys, T. Hadavizadeh, T. H. Hancock, N. Harnew, M. Kreps, J. Milnes, D. Piedigrossi, J. Rademacker, M. van Dijk

Abstract: TORCH is a time-of-flight detector designed to perform particle identification over the momentum range 2$-$10 GeV/c for a 10 m flight path. The detector exploits prompt Cherenkov light produced by charged particles traversing a quartz plate of 10 mm thickness. Photons are then trapped by total internal reflection and directed onto a detector plane instrumented with customised position-sensitive Mi… ▽ More TORCH is a time-of-flight detector designed to perform particle identification over the momentum range 2$-$10 GeV/c for a 10 m flight path. The detector exploits prompt Cherenkov light produced by charged particles traversing a quartz plate of 10 mm thickness. Photons are then trapped by total internal reflection and directed onto a detector plane instrumented with customised position-sensitive Micro-Channel Plate Photo-Multiplier Tube (MCP-PMT) detectors. A single-photon timing resolution of 70 ps is targeted to achieve the desired separation of pions and kaons, with an expectation of around 30 detected photons per track. Studies of the performance of a small-scale TORCH demonstrator with a radiator of dimensions 120 $\times$ 350 $\times$ 10 mm$^3$ have been performed in two test-beam campaigns during November 2017 and June 2018. Single-photon time resolutions ranging from 104.3 ps to 114.8 ps and 83.8 ps to 112.7 ps have been achieved for MCP-PMTs with granularity 4 $\times$ 64 and 8 $\times$ 64 pixels, respectively. Photon yields are measured to be within $\sim$10% and $\sim$30% of simulation, respectively. Finally, the outlook for future work with planned improvements is presented. △ Less

Submitted 18 February, 2020; originally announced February 2020.

Comments: 21 pages, 9 figures, to be published in Nuclear Inst. and Methods in Physics Research, A

Beam tests of a large-scale TORCH time-of-flight demonstrator

Authors: Thomas H. Hancock, Srishti Bhasin, Thomas Blake, Nicholas Brook, Tom Conneely, David Cussans, Roger Forty, Christophe Frei, Emmy P. M. Gabriel, Rui Gao, Timothy Gershon, Thierry Gys, Tom T. Hadavizadeh, Neville Harnew, Michel Kreps, James Milnes, Didier Piedigrossi, Jonas Rademacker, Maarten van Dijk

Abstract: The TORCH time-of-flight detector is designed to provide particle identification in the momentum range 2-10 GeV/c over large areas. The detector exploits prompt Cherenkov light produced by charged particles traversing a 10 mm thick quartz plate. The photons propagate via total internal reflection and are focused onto a detector plane comprising position-sensitive Micro-Channel Plate Photo-Multipli… ▽ More The TORCH time-of-flight detector is designed to provide particle identification in the momentum range 2-10 GeV/c over large areas. The detector exploits prompt Cherenkov light produced by charged particles traversing a 10 mm thick quartz plate. The photons propagate via total internal reflection and are focused onto a detector plane comprising position-sensitive Micro-Channel Plate Photo-Multiplier Tubes (MCP-PMT) detectors. The goal is to achieve a single-photon timing resolution of 70 ps, giving a timing precision of 15 ps per charged particle by combining the information from around 30 detected photons. The MCP-PMT detectors have been developed with a commercial partner (Photek Ltd, UK), leading to the delivery of a square tube of active area 53 $\times$ 53mm$^2$ with a granularity of 8 $\times$ 128 pixels equivalent. A large-scale demonstrator of TORCH, having a quartz plate of dimensions 660 $\times$ 1250 $\times$ 10 mm$^3$ and read out by a pair of MCP-PMTs with custom readout electronics, has been verified in a test beam campaign at the CERN PS. Preliminary results indicate that the required performance is close to being achieved. The anticipated performance of a full-scale TORCH detector at the LHCb experiment is presented. △ Less

Submitted 25 April, 2019; originally announced April 2019.

Comments: 12 pages, 7 figures, Paper submitted to Nuclear Instruments & Methods in Physics Research, Section A - Special Issue VCI 2019

Status of the TORCH time-of-flight project

Authors: Neville Harnew, Srishti Bhasin, Thomas Blake, Nicholas Brook, Tom Conneely, David Cussans, Maarten van Dijk, Roger Forty, Christoph Frei, Emmy Gabriel, Rui Gao, Timothy Gershon, Thierry Gys, Tom Hadavizadeh, Thomas Hancock, Michel Kreps, James Milnes, Didier Piedigrossi, Jonas Rademacker

Abstract: TORCH is a time-of-flight detector, designed to provide charged pi/K particle identification up to a momentum of 10 GeV/c for a 10 m flight path. To achieve this level of performance, a time resolution of 15 ps per incident particle is required. TORCH uses a plane of quartz of 1 cm thickness as a source of Cherenkov photons, which are then focussed onto square Micro-Channel Plate Photomultipliers… ▽ More TORCH is a time-of-flight detector, designed to provide charged pi/K particle identification up to a momentum of 10 GeV/c for a 10 m flight path. To achieve this level of performance, a time resolution of 15 ps per incident particle is required. TORCH uses a plane of quartz of 1 cm thickness as a source of Cherenkov photons, which are then focussed onto square Micro-Channel Plate Photomultipliers (MCP-PMTs) of active area 53 x 53 mm^2, segmented into 8 x 128 pixels equivalent. A small-scale TORCH demonstrator with a customised MCP-PMT and associated readout electronics has been successfully operated in a 5 GeV/c mixed pion/proton beam at the CERN PS facility. Preliminary results indicate that a single-photon resolution better than 100 ps can be achieved. The expected performance of a full-scale TORCH detector for the Upgrade II of the LHCb experiment is also discussed. △ Less

Submitted 23 December, 2018; originally announced December 2018.

Comments: 9 pages, 6 figures, Paper submitted to Nuclear and Methods A : Proceedings of the 10th International Workshop on Ring Imaging Cherenkov Detectors (RICH 2018), Moscow, Russia, July 29 to August 4 2018

TORCH: a large area time-of-flight detector for particle identification

Authors: Neville Harnew, Srishti Bhasin, Thomas Blake, Nicholas Brook, Tom Conneely, David Cussans, Maarten van Dijk, Roger Forty, Christophe Frei, Emmy Gabriel, Rui Gao, Timothy Gershon, Thierry Gys, Tom T. Hadavizadeh, Thomas Hancock, Michel Kreps, James Milnes, Didier Piedigrossi, Jonas Rademacker

Abstract: TORCH is a time-of-flight detector that is being developed for the Upgrade II of the LHCb experiment, with the aim of providing charged particle identification over the momentum range 2-10 GeV/c. A small-scale TORCH demonstrator with customised readout electronics has been operated successfully in beam tests at the CERN PS. Preliminary results indicate that a single-photon resolution better than 1… ▽ More TORCH is a time-of-flight detector that is being developed for the Upgrade II of the LHCb experiment, with the aim of providing charged particle identification over the momentum range 2-10 GeV/c. A small-scale TORCH demonstrator with customised readout electronics has been operated successfully in beam tests at the CERN PS. Preliminary results indicate that a single-photon resolution better than 100 ps can be achieved. △ Less

Submitted 3 December, 2018; v1 submitted 15 October, 2018; originally announced October 2018.

Comments: 5 pages, 2 figures, Paper submitted to Nuclear and Methods A : Proceedings of Frontier Detectors for Frontier Physics - 14th Pisa Meeting on Advanced Detectors

Testbeam studies of a TORCH prototype detector

Authors: Nicholas Brook, Lucia Castillo García, Thomas Conneely, David Cussans, Maarten van Dijk, Klaus Föhl, Roger Forty, Christoph Frei, Rui Gao, Thierry Gys, Thomas Hancock, Neville Harnew, Jon Lapington, James Milnes, Didier Piedigrossi, Jonas Rademacker, Ana Ros García

Abstract: TORCH is a novel time-of-flight detector that has been developed to provide charged-particle identification between 2 and 10 GeV/c momentum. TORCH combines arrival times from multiple Cherenkov photons produced within a 10 mm-thick quartz radiator plate, to achieve a 15 ps time-of-flight resolution per incident particle. A customised Micro-Channel Plate photomultiplier tube (MCP-PMT) and associate… ▽ More TORCH is a novel time-of-flight detector that has been developed to provide charged-particle identification between 2 and 10 GeV/c momentum. TORCH combines arrival times from multiple Cherenkov photons produced within a 10 mm-thick quartz radiator plate, to achieve a 15 ps time-of-flight resolution per incident particle. A customised Micro-Channel Plate photomultiplier tube (MCP-PMT) and associated readout system utilises an innovative charge-sharing technique between adjacent pixels to obtain the necessary 70 ps time resolution of each Cherenkov photon. A five-year R\&D programme has been undertaken, culminating in the construction of a small-scale prototype TORCH module. In testbeams at CERN, this prototype operated successfully with customised electronics and readout system. A full analysis chain has been developed to reconstruct the data and to calibrate the detector. Results are compared to those using a commercial Planacon MCP-PMT, and single photon resolutions approaching 80 ps have been achieved. The photon counting efficiency was found to be in reasonable agreement with a GEANT4 Monte Carlo simulation of the detector. The small-scale demonstrator is a precursor to a full-scale TORCH module (with a radiator plate of $660\times1250\times10~{\rm mm^3}$), which is currently under construction. △ Less

Submitted 2 August, 2018; v1 submitted 13 May, 2018; originally announced May 2018.

Comments: Accepted to Nuclear Instruments and Methods A

Performance of the LHCb RICH detector at the LHC

Authors: M. Adinolfi, G. Aglieri Rinella, E. Albrecht, T. Bellunato, S. Benson, T. Blake, C. Blanks, S. Brisbane, N. H. Brook, M. Calvi, B. Cameron, R. Cardinale, L. Carson, A. Contu, M. Coombes, C. D'Ambrosio, S. Easo, U. Egede, S. Eisenhardt, E. Fanchini, C. Fitzpatrick, F. Fontanelli, R. Forty, C. Frei, P. Gandini , et al. (72 additional authors not shown)

Abstract: The LHCb experiment has been taking data at the Large Hadron Collider (LHC) at CERN since the end of 2009. One of its key detector components is the Ring-Imaging Cherenkov (RICH) system. This provides charged particle identification over a wide momentum range, from 2-100 GeV/c. The operation and control software, and online monitoring of the RICH system are described. The particle identification p… ▽ More The LHCb experiment has been taking data at the Large Hadron Collider (LHC) at CERN since the end of 2009. One of its key detector components is the Ring-Imaging Cherenkov (RICH) system. This provides charged particle identification over a wide momentum range, from 2-100 GeV/c. The operation and control software, and online monitoring of the RICH system are described. The particle identification performance is presented, as measured using data from the LHC. Excellent separation of hadronic particle types (pion, kaon and proton) is achieved. △ Less

Submitted 17 September, 2013; v1 submitted 28 November, 2012; originally announced November 2012.

Report number: CERN-LHCb-DP-2012-003, LHCb-DP-2012-003

Journal ref: Eur. Phys. J. C 73 (2013) 2431

Absolute luminosity measurements with the LHCb detector at the LHC

Authors: The LHCb Collaboration, R. Aaij, B. Adeva, M. Adinolfi, C. Adrover, A. Affolder, Z. Ajaltouni, J. Albrecht, F. Alessio, M. Alexander, G. Alkhazov, P. Alvarez Cartelle, A. A. Alves Jr, S. Amato, Y. Amhis, J. Anderson, R. B. Appleby, O. Aquines Gutierrez, F. Archilli, L. Arrabito, A. Artamonov, M. Artuso, E. Aslanides, G. Auriemma, S. Bachmann , et al. (549 additional authors not shown)

Abstract: Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-prot… ▽ More Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In addition to the classic "van der Meer scan" method a novel technique has been developed which makes use of direct imaging of the individual beams using beam-gas and beam-beam interactions. This beam imaging method is made possible by the high resolution of the LHCb vertex detector and the close proximity of the detector to the beams, and allows beam parameters such as positions, angles and widths to be determined. The results of the two methods have comparable precision and are in good agreement. Combining the two methods, an overall precision of 3.5% in the absolute luminosity determination is reached. The techniques used to transport the absolute luminosity calibration to the full 2010 data-taking period are presented. △ Less

Submitted 11 January, 2012; v1 submitted 13 October, 2011; originally announced October 2011.

Comments: 48 pages, 19 figures. Results unchanged, improved clarity of Table 6, 9 and 10 and corresponding explanation in the text

Report number: LHCb-PAPER-2011-015; CERN-PH-EP-2011-157

Journal ref: 2012 JINST 7 P01010

Analysis and correction of the magnetic field effects in the Hybrid Photo-Detectors of the RICH2 Ring Imaging Cherenkov detector of LHCb

Authors: R. Cardinale, C. D'Ambrosio, R. Forty, C. Frei, T. Gys, A. Petrolini, D. Piedigrossi, B. Storaci, M. Villa

Abstract: The Ring Imaging Cherenkov detectors of the LHCb experiment at the Large Hadron Collider at CERN are equipped with Hybrid Photo-Detectors. These vacuum photo-detectors are affected by the stray magnetic field of the LHCb magnet, which degrades their imaging properties. This effect increases the error on the Cherenkov angle measurement and would reduce the particle identification capabilities of LH… ▽ More The Ring Imaging Cherenkov detectors of the LHCb experiment at the Large Hadron Collider at CERN are equipped with Hybrid Photo-Detectors. These vacuum photo-detectors are affected by the stray magnetic field of the LHCb magnet, which degrades their imaging properties. This effect increases the error on the Cherenkov angle measurement and would reduce the particle identification capabilities of LHCb. A system has been developed for the RICH2 Ring Imaging Cherenkov detector to perform a detailed characterisation of the magnetic distortion effects. It is described, along with the methods implemented to correct for these effects, restoring the optimal resolution. △ Less

Submitted 5 June, 2011; v1 submitted 2 May, 2011; originally announced May 2011.

Comments: 16 pages, 11 figures