-
Continuous Varifocal Metalens Based on Phase-Change Material
Authors:
Yilong Cui,
Liang Hou,
Kenan Guo,
Yue Jiang,
Qiegen Liu,
Shuyuan Xiao,
Tingting Liu
Abstract:
Metasurfaces have provided new opportunities for the realization of flat lenses, among which tunable metalenses have garnered considerable attention due to their flexible functionalities. In this paper, we present a continuously tunable metalens based on the phase-change material Sb$_{2}$S$_{3}$, which enables precise and continuous focal length control through the transition of states. Under the…
▽ More
Metasurfaces have provided new opportunities for the realization of flat lenses, among which tunable metalenses have garnered considerable attention due to their flexible functionalities. In this paper, we present a continuously tunable metalens based on the phase-change material Sb$_{2}$S$_{3}$, which enables precise and continuous focal length control through the transition of states. Under the excitation of linearly polarized light at 1550 nm, phase compensation is provided by changing the crystallization state of the Sb$_{2}$S$_{3}$ nanopillars, allowing the focal length to continuously shift between 36 $μ$m and 48 $μ$m. At the same time, the metalens maintains a high focusing efficiency over 75%. This approach provides greater design flexibility and broader applicability across diverse applications. By reducing the reliance on polarized light sources, it enhances device integration and tunability, paving the way for new opportunities in the practical implementation of metalenses in advanced optical imaging and nanophotonics.
△ Less
Submitted 10 December, 2024;
originally announced December 2024.
-
Acoustic Vortex Filter Based on Tunable Metasurfaces
Authors:
Liulin Li,
Bingyi Liu,
Zhixiang Li,
Kai Guo,
Zhongyi Guo
Abstract:
In this paper, we present an acoustic vortex filter (AVF) based on tunable metasurfaces, which can selectively filter the incident multiplexed vortices that carry different orbital angular momentum (OAM). Our metasurface-based AVF is composed of an upper acoustic metasurface (UAM) and a lower acoustic metasurface (LAM), of which the intrinsic topological charge (ITC) can be tuned by mechanically r…
▽ More
In this paper, we present an acoustic vortex filter (AVF) based on tunable metasurfaces, which can selectively filter the incident multiplexed vortices that carry different orbital angular momentum (OAM). Our metasurface-based AVF is composed of an upper acoustic metasurface (UAM) and a lower acoustic metasurface (LAM), of which the intrinsic topological charge (ITC) can be tuned by mechanically rotating the UAM along its central axis. Due to the critical order of the propagating vortex modes in waveguide, controlling the ITC of the AVF allows for the selective filtering of incoming multiplexed acoustic vortex beams based on the sound vortex diffraction in phase-gradient metasurface, which endows the vortex filter the capability that let the incident vortex of specific OAM pass through it. In the following demonstration, both in theory and experiment, we design the AVF and effectively filter the acoustic vortices with two opposite topological charges (TCs) by simply altering the orientation angle of the UAM. Based on this, we further demonstrate its application in asymmetric acoustic wave transmission. Our work offers an approach to selectively filter the incident acoustic vortex, which improves the capability to control the acoustic OAM via metasurfaces.
△ Less
Submitted 10 October, 2024;
originally announced October 2024.
-
Continuous-wave amplitude control via the interference phenomenon in acoustic structures
Authors:
Bingyi Liu,
Shanshan Liu,
Liulin Li,
Chuanxing Bi,
Kai Guo,
Yong Li,
Zhongyi Guo
Abstract:
We propose a strategy to continuously tune the amplitude of acoustic waves based on the interference among two mode-conversion paths in passive acoustic structures. The interference phenomenon is attributed to two conjugate acoustic geometric phases obtained with two mode-conversion processes in hybrid-type geometric-phase meta-atom (HGPM) pair. Notably, 100% modulation depth of the wave amplitude…
▽ More
We propose a strategy to continuously tune the amplitude of acoustic waves based on the interference among two mode-conversion paths in passive acoustic structures. The interference phenomenon is attributed to two conjugate acoustic geometric phases obtained with two mode-conversion processes in hybrid-type geometric-phase meta-atom (HGPM) pair. Notably, 100% modulation depth of the wave amplitude is achievable by simply varying the local orientation angle of meta-atom. We utilize the acoustic structure made of two cylindrical resonators to construct deep-subwavelength secondary source with designated initial phase delay, and HGPM supporting desired mode-conversion functionality is accordingly fabricated with four secondary sources. Both theory and experiment consistently verify the continuous amplitude modulation function of HGPM pair, which showcases a general scheme for reconfigurable amplitude-type acoustic meta-devices, i.e., those that require grayscale amplitude modulation for acoustic field engineering.
△ Less
Submitted 9 October, 2024;
originally announced October 2024.
-
Localized tension-induced giant folding in unstructured elastic sheets
Authors:
Kexin Guo,
Marc Suñé,
Kwok Ming Li,
K. Jimmy Hsia,
Mingchao Liu,
Dominic Vella
Abstract:
Buckling in compression is the archetype of elastic instability: when compressed along its longest dimension, a thin structure such as a playing card will buckle out-of-plane accommodating the imposed compression without a significant change of length. However, recent studies have demonstrated that tension applied to sheets with microscopic structure leads to out-of-plane deformation in applicatio…
▽ More
Buckling in compression is the archetype of elastic instability: when compressed along its longest dimension, a thin structure such as a playing card will buckle out-of-plane accommodating the imposed compression without a significant change of length. However, recent studies have demonstrated that tension applied to sheets with microscopic structure leads to out-of-plane deformation in applications from `groovy metasheets' for multi-stable morphing to kirigami grippers. Here, we demonstrate that this counter-intuitive behavior -- a large transverse folding induced by a relatively small imposed longitudinal tension -- occurs also in unstructured sheets of isotropic material. The key to this behavior is that a localized uniaxial tension induces giant folding; we refer to this as `localized TUG folding' to reflect the importance of localized tension and its mode of actuation. We show that localized TUG folding occurs because of an efficient transfer of applied tensile load into compression -- a geometric consequence of a localized applied tension. We determine scaling results for the folding angle as a function of applied strain in agreement with both experiments and simulations. The generic nature of localized TUG folding suggests that it might be utilized in a broader range of materials and structures than previously realized.
△ Less
Submitted 3 April, 2025; v1 submitted 26 August, 2024;
originally announced August 2024.
-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. Al Kadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola,
R. B. Amir
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 18 December, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Preliminary Design of CSNS-II Linac SRF LLRF
Authors:
Zhexin Xie,
Kai Guo,
Zhencheng Mu,
Xinpeng Ma,
Nan Gan,
Maliang Wan,
Bo Wang,
Linyan Rong,
Hui Zhang,
Hexin Wang
Abstract:
China Spallation Neutron Source(CSNS) target power will upgrade to 500 kW(CSNS-II) from 300kW, energy gain of H-Linac will up to 300 MeV from 80 MeV using about 50 superconductor cavities. LLRF is an important device for controlling the amplitude and phase of the SRF cavity field to be less than 0.6% and 0.6 deg. The parameters and requirements for CSNS-II Linac LLRF are presented here. The prelim…
▽ More
China Spallation Neutron Source(CSNS) target power will upgrade to 500 kW(CSNS-II) from 300kW, energy gain of H-Linac will up to 300 MeV from 80 MeV using about 50 superconductor cavities. LLRF is an important device for controlling the amplitude and phase of the SRF cavity field to be less than 0.6% and 0.6 deg. The parameters and requirements for CSNS-II Linac LLRF are presented here. The preliminary design work and algorithm verification progress and results at C-ADS Injector-I are introduced.
△ Less
Submitted 16 November, 2023;
originally announced November 2023.
-
Nonlinear dielectric geometric-phase metasurface with simultaneous structure and lattice symmetry design
Authors:
Bingyi Liu,
René Geromel,
Zhaoxian Su,
Kai Guo,
Yongtian Wang,
Zhongyi Guo,
Lingling Huang,
Thomas Zentgraf
Abstract:
In this work, we utilize thin dielectric meta-atoms placed on a silver substrate to efficiently enhance and manipulate the third harmonic generation. We theoretically and experimentally reveal that when the structural symmetry of the meta-atom is incompatible with the lattice symmetry of an array, some generalized nonlinear geometric phases appear, which offers new possibilities for harmonic gener…
▽ More
In this work, we utilize thin dielectric meta-atoms placed on a silver substrate to efficiently enhance and manipulate the third harmonic generation. We theoretically and experimentally reveal that when the structural symmetry of the meta-atom is incompatible with the lattice symmetry of an array, some generalized nonlinear geometric phases appear, which offers new possibilities for harmonic generation control beyond the accessible symmetries governed by the selection rule. The underlying mechanism is attributed to the modified rotation of the effective principal axis of a dense meta-atom array, where the strong coupling among the units gives rise to a generalized linear geometric phase modulation on the pump light. Therefore, nonlinear geometric phases carried by the third-harmonic emissions are the natural result of the wave-mixing process among the modes excited at the fundamental frequency. This mechanism further points out a new strategy to predict the nonlinear geometric phases delivered by the nanostructures according to their linear responses. Our design is simple and efficient, and offers alternatives for the nonlinear meta-devices that are capable of flexible photon generation and manipulation.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Beyond the Typical: Modeling Rare Plausible Patterns in Chemical Reactions by Leveraging Sequential Mixture-of-Experts
Authors:
Taicheng Guo,
Changsheng Ma,
Xiuying Chen,
Bozhao Nan,
Kehan Guo,
Shichao Pei,
Nitesh V. Chawla,
Olaf Wiest,
Xiangliang Zhang
Abstract:
Reaction prediction, a critical task in synthetic chemistry, is to predict the outcome of a reaction based on given reactants. Generative models like Transformer and VAE have typically been employed to predict the reaction product. However, these likelihood-maximization models overlooked the inherent stochastic nature of chemical reactions, such as the multiple ways electrons can be redistributed…
▽ More
Reaction prediction, a critical task in synthetic chemistry, is to predict the outcome of a reaction based on given reactants. Generative models like Transformer and VAE have typically been employed to predict the reaction product. However, these likelihood-maximization models overlooked the inherent stochastic nature of chemical reactions, such as the multiple ways electrons can be redistributed among atoms during the reaction process. In scenarios where similar reactants could follow different electron redistribution patterns, these models typically predict the most common outcomes, neglecting less frequent but potentially crucial reaction patterns. These overlooked patterns, though rare, can lead to innovative methods for designing synthetic routes and significantly advance synthesis techniques. To break the limits of previous approaches, we propose organizing the mapping space between reactants and electron redistribution patterns in a divide-and-conquer manner. We address the reaction problem by training multiple expert models, each specializing in capturing a type of electron redistribution pattern in reaction. These experts enhance the prediction process by considering both typical and other less common electron redistribution manners. In the inference stage, a dropout strategy is applied to each expert to improve the electron redistribution diversity. The most plausible products are finally predicted through a ranking stage designed to integrate the predictions from multiple experts. Experimental results on the largest reaction prediction benchmark USPTO-MIT show the superior performance of our proposed method compared to baselines.
△ Less
Submitted 20 August, 2024; v1 submitted 6 October, 2023;
originally announced October 2023.
-
Design and Characterization of a Novel Motion Conversion Element: Curved Groove Ball Bearing without Retainer
Authors:
Shaoxiang Wang,
Kaili Zhang,
Yaohua Hu,
Lixia Hou,
Kangquan Guo
Abstract:
An unconventional and innovative mechanical transmission component, the Curved Groove Ball Bearing without Retainer (CGBBR), is introduced in this paper to facilitate the conversion between rotary and reciprocating motion. The CGBBR boasts several advantages over conventional motion conversion mechanisms, including a streamlined and compact structure, as well as the mitigation of high-order vibrat…
▽ More
An unconventional and innovative mechanical transmission component, the Curved Groove Ball Bearing without Retainer (CGBBR), is introduced in this paper to facilitate the conversion between rotary and reciprocating motion. The CGBBR boasts several advantages over conventional motion conversion mechanisms, including a streamlined and compact structure, as well as the mitigation of high-order vibrations. This paper delves into the design methodology, structural attributes, kinematic principles, and dynamic response properties of the CGBBR. A novel design method named closed curve envelopment theory is proposed to generate the distinctive spatial surface structure of the CGBBR. Moreover, a design scheme is presented that employs the concept of diameter-stroke ratio for CGBBR implementation. A calculation methodology is also introduced for determining the number of rolling elements within the CGBBR, which serves as the foundation for subsequent optimization design. This paper deeply analyzes the kinematics principle of CGBBR and provides a new insight of motion conversion in mechanism.
△ Less
Submitted 14 June, 2023;
originally announced June 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Size Effect and Scaling in Quasi-static and Fatigue Fracture of Graphene Polymer Nanocomposites
Authors:
Yao Qiao,
Kaiwen Guo,
Marco Salviato
Abstract:
This work investigated how the structure size affects the quasi-static and fatigue behaviors of graphene polymer nanocomposites, a topic that has been often overlooked. The results showed that both quasi-static and fatigue failure of these materials scale nonlinearly with the structure size due to the presence of a significant Fracture Process Zone (FPZ) ahead of the crack tip induced by graphene…
▽ More
This work investigated how the structure size affects the quasi-static and fatigue behaviors of graphene polymer nanocomposites, a topic that has been often overlooked. The results showed that both quasi-static and fatigue failure of these materials scale nonlinearly with the structure size due to the presence of a significant Fracture Process Zone (FPZ) ahead of the crack tip induced by graphene nanomodification. Such a complicated size effect and scaling in either quasi-static or fatigue scenario cannot be described by the Linear Elastic Fracture Mechanics (LEFM), but can be well captured by the Size Effect Law (SEL) which considers the FPZ.
Thanks to the SEL, the enhanced quasi-static and fatigue fracture properties were properly characterized and shown to be independent of the structure size. In addition, the differences on the morphological and mechanical behaviors between quasi-static fracture and fatigue fracture were also identified and clarified in this work.
The experimental data and analytical analyses reported in this paper are important to deeply understand the mechanics of polymer-based nanocomposite materials and even other quasi-brittle materials (e.g., fiber-reinforced polymers or its hybrid with nanoparticles, etc.), and further advance the development of computational models capable of capturing size-dependent fracture of materials in various loading conditions.
△ Less
Submitted 10 March, 2023;
originally announced March 2023.
-
Deep-learning-augmented Computational Miniature Mesoscope
Authors:
Yujia Xue,
Qianwan Yang,
Guorong Hu,
Kehan Guo,
Lei Tian
Abstract:
Fluorescence microscopy is essential to study biological structures and dynamics. However, existing systems suffer from a tradeoff between field-of-view (FOV), resolution, and complexity, and thus cannot fulfill the emerging need of miniaturized platforms providing micron-scale resolution across centimeter-scale FOVs. To overcome this challenge, we developed Computational Miniature Mesoscope (CM…
▽ More
Fluorescence microscopy is essential to study biological structures and dynamics. However, existing systems suffer from a tradeoff between field-of-view (FOV), resolution, and complexity, and thus cannot fulfill the emerging need of miniaturized platforms providing micron-scale resolution across centimeter-scale FOVs. To overcome this challenge, we developed Computational Miniature Mesoscope (CM$^2$) that exploits a computational imaging strategy to enable single-shot 3D high-resolution imaging across a wide FOV in a miniaturized platform. Here, we present CM$^2$ V2 that significantly advances both the hardware and computation. We complement the 3$\times$3 microlens array with a new hybrid emission filter that improves the imaging contrast by 5$\times$, and design a 3D-printed freeform collimator for the LED illuminator that improves the excitation efficiency by 3$\times$. To enable high-resolution reconstruction across the large imaging volume, we develop an accurate and efficient 3D linear shift-variant (LSV) model that characterizes the spatially varying aberrations. We then train a multi-module deep learning model, CM$^2$Net, using only the 3D-LSV simulator. We show that CM$^2$Net generalizes well to experiments and achieves accurate 3D reconstruction across a $\sim$7-mm FOV and 800-$μ$m depth, and provides $\sim$6-$μ$m lateral and $\sim$25-$μ$m axial resolution. This provides $\sim$8$\times$ better axial localization and $\sim$1400$\times$ faster speed as compared to the previous model-based algorithm. We anticipate this simple and low-cost computational miniature imaging system will be impactful to many large-scale 3D fluorescence imaging applications.
△ Less
Submitted 7 September, 2022; v1 submitted 29 April, 2022;
originally announced May 2022.
-
Physics-driven Synthetic Data Learning for Biomedical Magnetic Resonance
Authors:
Qinqin Yang,
Zi Wang,
Kunyuan Guo,
Congbo Cai,
Xiaobo Qu
Abstract:
Deep learning has innovated the field of computational imaging. One of its bottlenecks is unavailable or insufficient training data. This article reviews an emerging paradigm, imaging physics-based data synthesis (IPADS), that can provide huge training data in biomedical magnetic resonance without or with few real data. Following the physical law of magnetic resonance, IPADS generates signals from…
▽ More
Deep learning has innovated the field of computational imaging. One of its bottlenecks is unavailable or insufficient training data. This article reviews an emerging paradigm, imaging physics-based data synthesis (IPADS), that can provide huge training data in biomedical magnetic resonance without or with few real data. Following the physical law of magnetic resonance, IPADS generates signals from differential equations or analytical solution models, making the learning more scalable, explainable, and better protecting privacy. Key components of IPADS learning, including signal generation models, basic deep learning network structures, enhanced data generation, and learning methods are discussed. Great potentials of IPADS have been demonstrated by representative applications in fast imaging, ultrafast signal reconstruction and accurate parameter quantification. Finally, open questions and future work have been discussed.
△ Less
Submitted 21 May, 2022; v1 submitted 21 March, 2022;
originally announced March 2022.
-
Computer-aided Recognition and Assessment of a Porous Bioelastomer on Ultrasound Images for Regenerative Medicine Applications
Authors:
Dun Wang,
Kaixuan Guo,
Yanying Zhu,
Jia Sun,
Aliona Dreglea,
Jiao Yu
Abstract:
Biodegradable elastic scaffolds have attracted more and more attention in the field of soft tissue repair and tissue engineering. These scaffolds made of porous bioelastomers support tissue ingrowth along with their own degradation. It is necessary to develop a computer-aided analyzing method based on ultrasound images to identify the degradation performance of the scaffold, not only to obviate th…
▽ More
Biodegradable elastic scaffolds have attracted more and more attention in the field of soft tissue repair and tissue engineering. These scaffolds made of porous bioelastomers support tissue ingrowth along with their own degradation. It is necessary to develop a computer-aided analyzing method based on ultrasound images to identify the degradation performance of the scaffold, not only to obviate the need to do destructive testing, but also to monitor the scaffold's degradation and tissue ingrowth over time. It is difficult using a single traditional image processing algorithm to extract continuous and accurate contour of a porous bioelastomer. This paper proposes a joint algorithm for the bioelastomer's contour detection and a texture feature extraction method for monitoring the degradation behavior of the bioelastomer. Mean-shift clustering method is used to obtain the bioelastomer's and native tissue's clustering feature information. Then the OTSU image binarization method automatically selects the optimal threshold value to convert the grayscale ultrasound image into a binary image. The Canny edge detector is used to extract the complete bioelastomer's contour. The first-order and second-order statistical features of texture are extracted. The proposed joint algorithm not only achieves the ideal extraction of the bioelastomer's contours in ultrasound images, but also gives valuable feedback of the degradation behavior of the bioelastomer at the implant site based on the changes of texture characteristics and contour area. The preliminary results of this study suggest that the proposed computer-aided image processing techniques have values and potentials in the non-invasive analysis of tissue scaffolds in vivo based on ultrasound images and may help tissue engineers evaluate the tissue scaffold's degradation and cellular ingrowth progress and improve the scaffold designs.
△ Less
Submitted 30 January, 2022; v1 submitted 28 January, 2022;
originally announced January 2022.
-
A new theory of fluid-solid coupling in a porous medium for application to the ultrasonic evaluation of tissue remodeling using bioelastomers
Authors:
Chuanyang Jiang,
Yanying Zhu,
Kaixuan Guo,
Qing Li,
Zhengwei You,
Jiao Yu
Abstract:
Bioelastomers have demonstrated tremendous value and potential in the field of tissue repair due to increasing health demands. Improved non-invasive methods are required for monitoring tissue development assisted by bioelastomers. In this paper, we present a novel theory of fluid-solid coupling in a porous medium for application to the ultrasonic evaluation of tissue remodeling using bioelastomers…
▽ More
Bioelastomers have demonstrated tremendous value and potential in the field of tissue repair due to increasing health demands. Improved non-invasive methods are required for monitoring tissue development assisted by bioelastomers. In this paper, we present a novel theory of fluid-solid coupling in a porous medium for application to the ultrasonic evaluation of tissue remodeling using bioelastomers. The common assumption of equal solid and liquid displacements used in the conventional description of a fluid-saturated porous solid cannot be applied to soft media, such as bioelastomers. We revise the geoacoustic theory of Biot to allow for relative motion between a fluid and a solid in an aggregate and derive an expression for a characteristic fluid-solid coupling parameter. Unlike the conventional method, the propagation speed of shear waves observed by ultrasound shear wave elastography is considered a known quantity in the novel theory, and the calculated value of the coupling parameter is used to evaluate the status of tissue repair. The model is validated by analyzing selected cases. The conditions under which the model can be applied are identified. However, further development of the theory is required to extract dynamic parameters that can be used to monitor the entire tissue remodeling process. In this paper, a theoretical approach is developed that can be used to analyze the mechanics of tissue repair. The theory has potential applications in the field of acellular in situ tissue engineering for non-invasive monitoring of the complex mechanical remodeling process of tissue regeneration and bioelastomer degradation.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
Solving Fourier ptychographic imaging problems via neural network modeling and TensorFlow
Authors:
Shaowei Jiang,
Kaikai Guo,
Jun Liao,
Guoan Zheng
Abstract:
Fourier ptychography is a recently developed imaging approach for large field-of-view and high-resolution microscopy. Here we model the Fourier ptychographic forward imaging process using a convolution neural network (CNN) and recover the complex object information in the network training process. In this approach, the input of the network is the point spread function in the spatial domain or the…
▽ More
Fourier ptychography is a recently developed imaging approach for large field-of-view and high-resolution microscopy. Here we model the Fourier ptychographic forward imaging process using a convolution neural network (CNN) and recover the complex object information in the network training process. In this approach, the input of the network is the point spread function in the spatial domain or the coherent transfer function in the Fourier domain. The object is treated as 2D learnable weights of a convolution or a multiplication layer. The output of the network is modeled as the loss function we aim to minimize. The batch size of the network corresponds to the number of captured low-resolution images in one forward / backward pass. We use a popular open-source machine learning library, TensorFlow, for setting up the network and conducting the optimization process. We analyze the performance of different learning rates, different solvers, and different batch sizes. It is shown that a large batch size with the Adam optimizer achieves the best performance in general. To accelerate the phase retrieval process, we also discuss a strategy to implement Fourier-magnitude projection using a multiplication neural network model. Since convolution and multiplication are the two most-common operations in imaging modeling, the reported approach may provide a new perspective to examine many coherent and incoherent systems. As a demonstration, we discuss the extensions of the reported networks for modeling single-pixel imaging and structured illumination microscopy (SIM). 4-frame resolution doubling is demonstrated using a neural network for SIM. We have made our implementation code open-source for the broad research community.
△ Less
Submitted 9 March, 2018;
originally announced March 2018.
-
Dual-LED-based multichannel microscopy for whole-slide multiplane, multispectral, and phase imaging
Authors:
Jun Liao,
Zhe Wang,
Zibang Zhang,
Zichao Bian,
Kaikai Guo,
Aparna Nambiar,
Yutong Jiang,
Shaowei Jiang,
Jingang Zhong,
Michael Choma,
Guoan Zheng
Abstract:
We report the development of a multichannel microscopy for whole-slide multiplane, multispectral, and phase imaging. We use trinocular heads to split the beam path into 6 independent channels and employ a camera array for parallel data acquisition, achieving a maximum data throughput of ~1 gigapixel per second. To perform single-frame rapid autofocusing, we place two near-infrared LEDs at the back…
▽ More
We report the development of a multichannel microscopy for whole-slide multiplane, multispectral, and phase imaging. We use trinocular heads to split the beam path into 6 independent channels and employ a camera array for parallel data acquisition, achieving a maximum data throughput of ~1 gigapixel per second. To perform single-frame rapid autofocusing, we place two near-infrared LEDs at the back focal plane of the condenser lens to illuminate the sample from two different incident angles. A hot mirror is used to direct the near-infrared light to an autofocusing camera. For multiplane whole slide imaging (WSI), we acquire 6 different focal planes of a thick specimen simultaneously. For multispectral WSI, we relay the 6 independent image planes to the same focal position and simultaneously acquire information at 6 spectral bands. For whole-slide phase imaging, we acquire images at 3 focal positions simultaneously and use the transport-of-intensity equation to recover the phase information. We also provide an open-source design to further increase the number of channels from 6 to 15. The reported platform provides a simple solution for multiplexed fluorescence imaging and multimodal WSI. Acquiring an instant focal stack without z-scanning may also enable fast 3D dynamic tracking of various biological samples.
△ Less
Submitted 21 June, 2017; v1 submitted 28 March, 2017;
originally announced March 2017.
-
Motion-corrected Fourier ptychography
Authors:
Liheng Bian,
Guoan Zheng,
Kaikai Guo,
Jinli Suo,
Changhuei Yang,
Feng Chen,
Qionghai Dai
Abstract:
Fourier ptychography (FP) is a recently proposed computational imaging technique for high space-bandwidth product imaging. In real setups such as endoscope and transmission electron microscope, the common sample motion largely degrades the FP reconstruction and limits its practicability. In this paper, we propose a novel FP reconstruction method to efficiently correct for unknown sample motion. Sp…
▽ More
Fourier ptychography (FP) is a recently proposed computational imaging technique for high space-bandwidth product imaging. In real setups such as endoscope and transmission electron microscope, the common sample motion largely degrades the FP reconstruction and limits its practicability. In this paper, we propose a novel FP reconstruction method to efficiently correct for unknown sample motion. Specifically, we adaptively update the sample's Fourier spectrum from low spatial-frequency regions towards high spatial-frequency ones, with an additional motion recovery and phase-offset compensation procedure for each sub-spectrum. Benefiting from the phase retrieval redundancy theory, the required large overlap between adjacent sub-spectra offers an accurate guide for successful motion recovery. Experimental results on both simulated data and real captured data show that the proposed method can correct for unknown sample motion with its standard deviation being up to 10% of the field-of-view scale. We have released our source code for non-commercial use, and it may find wide applications in related FP platforms such as endoscopy and transmission electron microscopy.
△ Less
Submitted 5 June, 2016;
originally announced June 2016.
-
Fourier ptychographic reconstruction using Wirtinger flow optimization
Authors:
Liheng Bian,
Jinli Suo,
Guoan Zheng,
KaiKai Guo,
Feng Chen,
Qionghai Dai
Abstract:
Recently Fourier Ptychography (FP) has attracted great attention, due to its marked effectiveness in leveraging snapshot numbers for spatial resolution in large field-of-view imaging. To acquire high signal-to-noise-ratio (SNR) images under angularly varying illuminations for subsequent reconstruction, FP requires long exposure time, which largely limits its practical applications. In this paper,…
▽ More
Recently Fourier Ptychography (FP) has attracted great attention, due to its marked effectiveness in leveraging snapshot numbers for spatial resolution in large field-of-view imaging. To acquire high signal-to-noise-ratio (SNR) images under angularly varying illuminations for subsequent reconstruction, FP requires long exposure time, which largely limits its practical applications. In this paper, based on the recently reported Wirtinger flow algorithm, we propose an iterative optimization framework incorporating phase retrieval and noise relaxation together, to realize FP reconstruction using low SNR images captured under short exposure time. Experiments on both synthetic and real captured data validate the effectiveness of the proposed reconstruction method. Specifically, the proposed technique could save around 80% exposure time to achieve similar retrieval accuracy compared to the conventional FP. Besides, we have released our source code for non-commercial use.
△ Less
Submitted 24 November, 2014;
originally announced November 2014.
-
Development of a Thermal Control System with Mechanically Pumped CO2 Two-Phase Loops for the AMS-02 Tracker on the ISS
Authors:
G. Alberti,
A. Alvino,
G. Ambrosi,
M. Bardet,
R. Battiston,
S. Borsini,
J. F. Cao,
Y. Chen,
J. van Es,
C. Gargiulo,
K. H. Guo,
L. Guo,
Z. H. He,
Z. C. Huang,
V. Koutsenko,
E. Laudi,
A. Lebedev,
S. C. Lee,
T. X. Li,
Y. L. Lin,
S. S. Lv,
M. Menichelli,
J. Y. Miao,
D. C. Mo,
J. Q. Ni
, et al. (15 additional authors not shown)
Abstract:
To provide a stable thermal environment for the AMS-Tracker, a thermal control system based on mechanically pumped CO2 two-phase loops was developed. It has been operating reliably in space since May 19, 2011. In this article, we summarize the design, construction, tests, and performance of the AMS-Tracker thermal control system (AMS-TTCS).
To provide a stable thermal environment for the AMS-Tracker, a thermal control system based on mechanically pumped CO2 two-phase loops was developed. It has been operating reliably in space since May 19, 2011. In this article, we summarize the design, construction, tests, and performance of the AMS-Tracker thermal control system (AMS-TTCS).
△ Less
Submitted 18 February, 2013;
originally announced February 2013.
-
The US stock market leads the Federal funds rate and Treasury bond yields
Authors:
Kun Guo,
Wei-Xing Zhou,
Si-Wei Cheng,
Didier Sornette
Abstract:
Using a recently introduced method to quantify the time varying lead-lag dependencies between pairs of economic time series (the thermal optimal path method), we test two fundamental tenets of the theory of fixed income: (i) the stock market variations and the yield changes should be anti-correlated; (ii) the change in central bank rates, as a proxy of the monetary policy of the central bank, shou…
▽ More
Using a recently introduced method to quantify the time varying lead-lag dependencies between pairs of economic time series (the thermal optimal path method), we test two fundamental tenets of the theory of fixed income: (i) the stock market variations and the yield changes should be anti-correlated; (ii) the change in central bank rates, as a proxy of the monetary policy of the central bank, should be a predictor of the future stock market direction. Using both monthly and weekly data, we found very similar lead-lag dependence between the S&P500 stock market index and the yields of bonds inside two groups: bond yields of short-term maturities (Federal funds rate (FFR), 3M, 6M, 1Y, 2Y, and 3Y) and bond yields of long-term maturities (5Y, 7Y, 10Y, and 20Y). In all cases, we observe the opposite of (i) and (ii). First, the stock market and yields move in the same direction. Second, the stock market leads the yields, including and especially the FFR. Moreover, we find that the short-term yields in the first group lead the long-term yields in the second group before the financial crisis that started mid-2007 and the inverse relationship holds afterwards. These results suggest that the Federal Reserve is increasingly mindful of the stock market behavior, seen at key to the recovery and health of the economy. Long-term investors seem also to have been more reactive and mindful of the signals provided by the financial stock markets than the Federal Reserve itself after the start of the financial crisis. The lead of the S&P500 stock market index over the bond yields of all maturities is confirmed by the traditional lagged cross-correlation analysis.
△ Less
Submitted 10 February, 2011;
originally announced February 2011.
