-
Maintaining a Resonance Condition of an RF Spin Rotator Through a Feedback Loop in a Storage Ring
Authors:
V. Hejny,
A. Andres,
J. Pretz,
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi,
L. Barion,
I. Bekman,
M. Beyß,
C. Böhme,
B. Breitkreutz,
N. Canale,
G. Ciullo,
S. Dymov,
N. -O. Fröhlich,
R. Gebel,
M. Gaisser,
K. Grigoryev,
D. Grzonka,
J. Hetzel,
O. Javakhishvili,
A. Kacharava,
V. Kamerdzhiev,
S. Karanth
, et al. (41 additional authors not shown)
Abstract:
This paper presents the successful application of a phase-lock feedback system to maintain the resonance condition of a radio frequency (rf) spin rotator (specifically, an rf Wien filter) with respect to a 120 kHz spin precession in the Cooler Synchrotron (COSY) storage ring. Real-time monitoring of the spin precession and the rf Wien filter signal allows the relative phase between the two to be s…
▽ More
This paper presents the successful application of a phase-lock feedback system to maintain the resonance condition of a radio frequency (rf) spin rotator (specifically, an rf Wien filter) with respect to a 120 kHz spin precession in the Cooler Synchrotron (COSY) storage ring. Real-time monitoring of the spin precession and the rf Wien filter signal allows the relative phase between the two to be stabilized at an arbitrary setpoint. The feedback system compensates for deviations in the relative phase by adjusting the frequency and/or phase as needed. With this method, a variation in phase relative to the demand phase with a standard deviation of $σ_{Δ\varphi}\approx 0.2\mathrm{rad}$ could be achieved. The system was implemented in two runs aiming at a first direct measurement of the deuteron electric dipole moment in 2018 and 2021. In addition, the difference between a single-bunch beam affected by the spin rotator and a two-bunch system in which only one bunch is exposed to the spin rotator fields is discussed. Both methods have been used during these beam times. The ability to keep the spin precession and the rf fields synchronized is also crucial for future investigations of electric dipole moments of charged particles using storage rings.
△ Less
Submitted 15 April, 2025; v1 submitted 31 January, 2025;
originally announced January 2025.
-
Pilot bunch and co-magnetometry of polarized particles stored in a ring
Authors:
J. Slim,
F. Rathmann,
A. Andres,
V. Hejny,
A. Nass,
A. Kacharava,
P. Lenisa,
N. N. Nikolaev,
J. Pretz,
A. Saleev,
V. Shmakova,
H. Soltner,
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi,
L. Barion,
I. Bekman,
M. Beyß,
C. Böhme,
B. Breitkreutz,
N. Canale,
G. Ciullo,
S. Dymov,
N. -O. Fröhlich
, et al. (38 additional authors not shown)
Abstract:
In polarization experiments at storage rings, one of the challenges is to maintain the spin-resonance condition of a radio-frequency spin rotator with the spin-precessions of the orbiting particles. Time-dependent variations of the magnetic fields of ring elements lead to unwanted variations of the spin precession frequency. We report here on a solution to this problem by shielding (or masking) on…
▽ More
In polarization experiments at storage rings, one of the challenges is to maintain the spin-resonance condition of a radio-frequency spin rotator with the spin-precessions of the orbiting particles. Time-dependent variations of the magnetic fields of ring elements lead to unwanted variations of the spin precession frequency. We report here on a solution to this problem by shielding (or masking) one of the bunches stored in the ring from the high-frequency fields of the spin rotator, so that the masked pilot bunch acts as a co-magnetometer for the other signal bunch, tracking fluctuations in the ring on a time scale of about one second. While the new method was developed primarily for searches of electric dipole moments of charged particles, it may have far-reaching implications for future spin physics facilities, such as the EIC and NICA.
△ Less
Submitted 16 September, 2023; v1 submitted 10 September, 2023;
originally announced September 2023.
-
Spin decoherence and off-resonance behavior of radiofrequency-driven spin rotations in storage rings
Authors:
N. N. Nikolaev,
F. Rathmann,
J. Slim,
A. Andres,
V. Hejny,
A. Nass,
A. Kacharava,
P. Lenisa,
J. Pretz,
A. Saleev,
V. Shmakova,
H. Soltner,
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi,
L. Barion,
I. Bekman,
M. Beyß,
C. Böhme,
B. Breitkreutz,
N. Canale,
G. Ciullo,
S. Dymov,
N. -O. Fröhlich
, et al. (38 additional authors not shown)
Abstract:
Radiofrequency-driven resonant spin rotators are routinely used as standard instruments in polarization experiments in particle and nuclear physics. Maintaining the continuous exact parametric spin-resonance condition of the equality of the spin rotator and the spin precession frequency during operation constitutes one of the challenges. We present a detailed analytic description of the impact of…
▽ More
Radiofrequency-driven resonant spin rotators are routinely used as standard instruments in polarization experiments in particle and nuclear physics. Maintaining the continuous exact parametric spin-resonance condition of the equality of the spin rotator and the spin precession frequency during operation constitutes one of the challenges. We present a detailed analytic description of the impact of detuning the exact spin resonance on the vertical and the in-plane precessing components of the polarization. An important part of the formalism presented here is the consideration of experimentally relevant spin-decoherence effects. We discuss applications of the developed formalism to the interpretation of the experimental data on the novel pilot bunch approach to control the spin-resonance condition during the operation of the radiofrequency-driven Wien filter that is used as a spin rotator in the first direct deuteron electric dipole moment measurement at COSY. We emphasize the potential importance of the hitherto unexplored phase of the envelope of the horizontal polarization as an indicator of the stability of the radiofrequency-driven spin rotations in storage rings. The work presented here serves as a satellite publication to the work published concurrently on the proof of principle experiment about the so-called pilot bunch approach that was developed to provide co-magnetometry for the deuteron electric dipole moment experiment at COSY.
△ Less
Submitted 16 September, 2023; v1 submitted 10 September, 2023;
originally announced September 2023.
-
The KOALA Experiment for (anti)proton-proton Elastic Scattering
Authors:
Yong Zhou,
Huagen Xu,
Ulf Bechstedt,
Jürgen Böker,
Nils Demary,
Frank Goldenbaum,
Dieter Grzonka,
Jan Hetzel,
Alfons Khoukaz,
Franz Klehr,
Thomas Krings,
Lukas Lessmann,
Christian Mannweiler,
Dieter Prasuhn,
Steffen Quilitzsch,
James Ritman,
Susan Schadmand,
Thomas Sefzick,
Rolf Stassen,
Peter Wüstner
Abstract:
The KOALA experiment measures the differential cross section of (anti)proton-proton elastic scattering over a wide range of four-momentum transfer squared 0.0008 < |t| < 0.1 (GeV/c)$^2$ . The forward scattering parameters and the absolute luminosity can be deduced by analyzing the characteristic shape of the differential cross-section spectrum. The experiment is based on fixed target kinematics an…
▽ More
The KOALA experiment measures the differential cross section of (anti)proton-proton elastic scattering over a wide range of four-momentum transfer squared 0.0008 < |t| < 0.1 (GeV/c)$^2$ . The forward scattering parameters and the absolute luminosity can be deduced by analyzing the characteristic shape of the differential cross-section spectrum. The experiment is based on fixed target kinematics and uses an internal hydrogen cluster jet target. The wide range of |t| is achieved by measuring the total kinetic energy of the recoil protons near 90° with a recoil detector, which consists of silicon and germanium single-sided strip sensors. The energy resolution of the recoil detector is better than 30 keV (FWHM). A forward detector consisting of two layers of plastic scintillators measures the elastically scattered beam particles in the forward direction close to the beam axis. It helps suppress the large background at small recoil angles and improves the identification of elastic scattering events in the low |t| range. The KOALA setup has been installed and commissioned at COSY in order to validate the detector by measuring the proton-proton elastic scattering. The results from this commissioning are presented here.
△ Less
Submitted 17 March, 2021;
originally announced March 2021.
-
A New Beam Polarimeter at COSY to Search for Electric Dipole Moments of Charged Particles
Authors:
F. Müller,
O. Javakhishvili,
D. Shergelashvili,
I. Keshelashvili,
D. Mchedlishvili,
F. Abusaif,
A. Aggarwal,
L. Barion,
S. Basile,
J. Böker,
N. Canale,
G. Ciullo,
S. Dymov,
O. Felden,
M. Gagoshidze,
R. Gebel,
N. Demary,
K. Grigoryev,
D. Grzonka,
T. Hahnraths,
V. Hejny,
A. Kacharava,
V. Kamerdzhiev,
S. Karanth,
A. Kulikov
, et al. (31 additional authors not shown)
Abstract:
A calorimetric polarimeter based on inorganic LYSO scintillators is described. It has been designed for use in a storage ring to search for electric dipole moments (EDM) of charged particles such as the proton and deuteron. Its development and first use was on the Cooler Synchrotron (COSY) at the Forschungszentrum Jülich with 0.97 GeV/c polarized deuterons, a particle and energy suitable for an ED…
▽ More
A calorimetric polarimeter based on inorganic LYSO scintillators is described. It has been designed for use in a storage ring to search for electric dipole moments (EDM) of charged particles such as the proton and deuteron. Its development and first use was on the Cooler Synchrotron (COSY) at the Forschungszentrum Jülich with 0.97 GeV/c polarized deuterons, a particle and energy suitable for an EDM search. The search requires a polarimeter with high efficiency, large analyzing power, and stable operating characteristics. With typical beam momenta of about 1 GeV/c, the scattering of protons or deuterons from a carbon target into forward angles becomes a nearly optimal choice of an analyzing reaction. The polarimeter described here consists of 52 LYSO detector modules, arranged in 4 symmetric blocks (up, down, left, right) for energy determination behind plastic scintillators for particle identification via energy loss. The commissioning results of the current setup demonstrate that the polarimeter is ready to be employed in a first direct search for an EDM on the deuteron, which is planned at COSY in the next two years.
△ Less
Submitted 22 October, 2020;
originally announced October 2020.
-
Beam-based alignment at the Cooler Synchrotron COSY as a prerequisite for an electric dipole moment measurement
Authors:
T. Wagner,
A. Nass,
J. Pretz,
F. Abusaif,
A. Aggarwal,
A. Andres,
I. Bekman,
N. Canale,
I. Ciepal,
G. Ciullo,
F. Dahmen,
S. Dymov,
C. Ehrlich,
R. Gebel,
K. Grigoryev,
D. Grzonka,
V. Hejny,
J. Hetzel,
A. Kacharava,
V. Kamerdzhiev,
S. Karanth,
I. Keshelashvili,
A. Kononov,
A. Kulikov,
K. Laiham
, et al. (25 additional authors not shown)
Abstract:
The Jülich Electric Dipole moment Investigation (JEDI) collaboration aims at a direct measurement of the Electric Dipole Moment (EDM) of protons and deuterons using a storage ring. The measurement is based on a polarization measurement. In order to reach highest accuracy, one has to know the exact trajectory through the magnets, especially the quadrupoles, to avoid the influence of magnetic fields…
▽ More
The Jülich Electric Dipole moment Investigation (JEDI) collaboration aims at a direct measurement of the Electric Dipole Moment (EDM) of protons and deuterons using a storage ring. The measurement is based on a polarization measurement. In order to reach highest accuracy, one has to know the exact trajectory through the magnets, especially the quadrupoles, to avoid the influence of magnetic fields on the polarization vector. In this paper, the development of a beam-based alignment technique is described that was developed and implemented at the COoler SYnchrotron (COSY) at Forschungszentrum Jülich. Well aligned quadrupoles permit one to absolutely calibrate the Beam Position Monitors (BPMs). The method is based on the fact that a particle beam, which does not pass through the center of a quadrupole, experiences a deflection. The precision reached by the method is approximately 40 micro meter. Some consequences for the design of a new high precision storage ring for EDM mesasurements are discussed.
△ Less
Submitted 16 December, 2020; v1 submitted 4 September, 2020;
originally announced September 2020.
-
Two-Symmetry Penning-Ioffe Trap for Antihydrogen Cooling and Spectroscopy
Authors:
E. Tardiff,
X. Fan,
G. Gabrielse,
D. Grzonka,
C. Hamley,
E. A. Hessels,
N. Jones,
G. Khatri,
S. Kolthammer,
D. Martinez Zambrano,
C. Meisenhelder,
T. Morrison,
E. Nottet,
E. Novitski,
C. H. Storry
Abstract:
High-accuracy spectroscopic comparisons of trapped antihydrogen atoms ($\overline{\text{H}}$) and hydrogen atoms ($\text{H}$) promise to stringently test the fundamental CPT symmetry invariance of the standard model of particle physics. ATRAP's nested Penning-Ioffe trap was developed for such studies. The first of its unique features is that its magnetic Ioffe trap for $\overline{\text{H}}$ atoms…
▽ More
High-accuracy spectroscopic comparisons of trapped antihydrogen atoms ($\overline{\text{H}}$) and hydrogen atoms ($\text{H}$) promise to stringently test the fundamental CPT symmetry invariance of the standard model of particle physics. ATRAP's nested Penning-Ioffe trap was developed for such studies. The first of its unique features is that its magnetic Ioffe trap for $\overline{\text{H}}$ atoms can be switched between quadrupole and octupole symmetries. The second is that it allows laser and microwave access perpendicular to the central axis of the traps.
△ Less
Submitted 10 March, 2020;
originally announced March 2020.
-
Study of Silicon Photomultiplier Radiation Hardness with Proton Beam from the JULIC Cyclotron
Authors:
Tamer Tolba,
Dieter Grzonka,
Thomas Sefzick,
James Ritman
Abstract:
In this work we study the performance of silicon photomultiplier (SiPM) light sensors after exposure to the JULIC cyclotron proton beam, of energy $\sim$ 39 MeV, relative to their performance before exposure. The SiPM devices used in this study show a significant change in their behavior and downward shift of their breakdown voltage by as much as $\sim$ 0.4$\pm$0.1 V. Single photon measurements ap…
▽ More
In this work we study the performance of silicon photomultiplier (SiPM) light sensors after exposure to the JULIC cyclotron proton beam, of energy $\sim$ 39 MeV, relative to their performance before exposure. The SiPM devices used in this study show a significant change in their behavior and downward shift of their breakdown voltage by as much as $\sim$ 0.4$\pm$0.1 V. Single photon measurements appear to be no longer possible for the SiPMs under study after exposure to a dose of $\sim$ 0.2 Gy (corresponding to an integrated proton flux of $\sim$$φ_{p}$=1.06x10$^{8}$ p/cm$^{2}$). No visible damage to the surface of the devices was caused by the exposure.
△ Less
Submitted 18 November, 2020; v1 submitted 10 March, 2020;
originally announced March 2020.
-
Storage Ring to Search for Electric Dipole Moments of Charged Particles -- Feasibility Study
Authors:
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi-Esuain,
A. Andres,
A. Atanasov,
L. Barion,
S. Basile,
M. Berz,
C. Böhme,
J. Böker,
J. Borburgh,
N. Canale,
C. Carli,
I. Ciepał,
G. Ciullo,
M. Contalbrigo,
J. -M. De Conto,
S. Dymov,
O. Felden,
M. Gaisser,
R. Gebel,
N. Giese,
J. Gooding,
K. Grigoryev
, et al. (76 additional authors not shown)
Abstract:
The proposed method exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM) aligned along the particle spin axis. Statistical sensitivities could approach 10$^{-29}$ e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarisatio…
▽ More
The proposed method exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM) aligned along the particle spin axis. Statistical sensitivities could approach 10$^{-29}$ e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarisation, initially parallel to the particle velocity, for times in excess of 15 minutes. Large radial electric fields, acting through the EDM, will rotate the polarisation from the longitudinal to the vertical direction. The slow rise in the vertical polarisation component, detected through scattering from a target, signals the EDM.
The project strategy is outlined. A stepwise plan is foreseen, starting with ongoing COSY activities that demonstrate technical feasibility. Achievements to date include reduced polarization measurement errors, long horizontal plane polarization lifetimes, and control of the polarization direction through feedback from scattering measurements. The project continues with a proof-of-capability measurement (precursor experiment; first direct deuteron EDM measurement), an intermediate prototype ring (proof-of-principle; demonstrator for key technologies), and finally a high-precision electric-field storage ring.
△ Less
Submitted 25 June, 2021; v1 submitted 17 December, 2019;
originally announced December 2019.
-
Feasibility Study for an EDM Storage Ring
Authors:
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi-Esuain,
L. Barion,
S. Basile,
M. Berz,
M. Beyß,
C. Böhme,
J. Böker,
J. Borburgh,
C. Carli,
I. Ciepał,
G. Ciullo,
M. Contalbrigo,
J. -M. De Conto,
S. Dymov,
R. Engels,
O. Felden,
M. Gagoshidze,
M. Gaisser,
R. Gebel,
N. Giese,
K. Grigoryev,
D. Grzonka
, et al. (70 additional authors not shown)
Abstract:
This project exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM, $\vec d$) aligned along the particle spin axis. Statistical sensitivities can approach $10^{-29}$~e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarizati…
▽ More
This project exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM, $\vec d$) aligned along the particle spin axis. Statistical sensitivities can approach $10^{-29}$~e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarization, initially parallel to the particle velocity, for times in excess of 15 minutes. Large radial electric fields, acting through the EDM, will rotate the polarization ($\vec d \times\vec E$). The slow rise in the vertical polarization component, detected through scattering from a target, signals the EDM. The project strategy is outlined. It foresees a step-wise plan, starting with ongoing COSY activities that demonstrate technical feasibility. Achievements to date include reduced polarization measurement errors, long horizontal-plane polarization lifetimes, and control of the polarization direction through feedback from the scattering measurements. The project continues with a proof-of-capability measurement (precursor experiment; first direct deuteron EDM measurement), an intermediate prototype ring (proof-of-principle; demonstrator for key technologies), and finally the high precision electric-field storage ring.
△ Less
Submitted 18 January, 2019; v1 submitted 20 December, 2018;
originally announced December 2018.
-
Phase Measurement for Driven Spin Oscillations in a Storage Ring
Authors:
N. Hempelmann,
V. Hejny,
J. Pretz,
H. Soltner,
W. Augustyniak,
Z. Bagdasarian,
M. Bai,
L. Barion,
M. Berz,
S. Chekmenev,
G. Ciullo,
S. Dymov,
D. Eversmann,
M. Gaisser,
R. Gebel,
K. Grigoryev,
D. Grzonka,
G. Guidoboni,
D. Heberling,
J. Hetzel,
F. Hinder,
A. Kacharava,
V. Kamerdzhiev,
I. Keshelashvili,
I. Koop
, et al. (43 additional authors not shown)
Abstract:
This paper reports the first simultaneous measurement of the horizontal and vertical components of the polarization vector in a storage ring under the influence of a radio frequency (rf) solenoid. The experiments were performed at the Cooler Synchrotron COSY in Jülich using a vector polarized, bunched $0.97\,\textrm{GeV/c}$ deuteron beam. Using the new spin feedback system, we set the initial phas…
▽ More
This paper reports the first simultaneous measurement of the horizontal and vertical components of the polarization vector in a storage ring under the influence of a radio frequency (rf) solenoid. The experiments were performed at the Cooler Synchrotron COSY in Jülich using a vector polarized, bunched $0.97\,\textrm{GeV/c}$ deuteron beam. Using the new spin feedback system, we set the initial phase difference between the solenoid field and the precession of the polarization vector to a predefined value. The feedback system was then switched off, allowing the phase difference to change over time, and the solenoid was switched on to rotate the polarization vector. We observed an oscillation of the vertical polarization component and the phase difference. The oscillations can be described using an analytical model. The results of this experiment also apply to other rf devices with horizontal magnetic fields, such as Wien filters. The precise manipulation of particle spins in storage rings is a prerequisite for measuring the electric dipole moment (EDM) of charged particles.
△ Less
Submitted 24 April, 2018; v1 submitted 10 January, 2018;
originally announced January 2018.
-
Phase locking the spin precession in a storage ring
Authors:
N. Hempelmann,
V. Hejny,
J. Pretz,
E. Stephenson,
W. Augustyniak,
Z. Bagdasarian,
M. Bai,
L. Barion,
M. Berz,
S. Chekmenev,
G. Ciullo,
S. Dymov,
F. -J. Etzkorn,
D. Eversmann,
M. Gaisser,
R. Gebel,
K. Grigoryev,
D. Grzonka,
G. Guidoboni,
T. Hanraths,
D. Heberling,
J. Hetzel,
F. Hinder,
A. Kacharava,
V. Kamerdzhiev
, et al. (44 additional authors not shown)
Abstract:
This letter reports the successful use of feedback from a spin polarization measurement to the revolution frequency of a 0.97 GeV/$c$ bunched and polarized deuteron beam in the Cooler Synchrotron (COSY) storage ring in order to control both the precession rate ($\approx 121$ kHz) and the phase of the horizontal polarization component. Real time synchronization with a radio frequency (rf) solenoid…
▽ More
This letter reports the successful use of feedback from a spin polarization measurement to the revolution frequency of a 0.97 GeV/$c$ bunched and polarized deuteron beam in the Cooler Synchrotron (COSY) storage ring in order to control both the precession rate ($\approx 121$ kHz) and the phase of the horizontal polarization component. Real time synchronization with a radio frequency (rf) solenoid made possible the rotation of the polarization out of the horizontal plane, yielding a demonstration of the feedback method to manipulate the polarization. In particular, the rotation rate shows a sinusoidal function of the horizontal polarization phase (relative to the rf solenoid), which was controlled to within a one standard deviation range of $σ= 0.21$ rad. The minimum possible adjustment was 3.7 mHz out of a revolution frequency of 753 kHz, which changes the precession rate by 26 mrad/s. Such a capability meets a requirement for the use of storage rings to look for an intrinsic electric dipole moment of charged particles.
△ Less
Submitted 6 July, 2017; v1 submitted 22 March, 2017;
originally announced March 2017.
-
Spin tune mapping as a novel tool to probe the spin dynamics in storage rings
Authors:
A. Saleev,
N. N. Nikolaev,
F. Rathmann,
W. Augustyniak,
Z. Bagdasarian,
M. Bai,
M. Berz,
S. Chekmenev,
G. Ciullo,
S. Dymov,
D. Eversmann,
M. Gaisser,
R. Gebel,
K. Grigoryev,
D. Grzonka,
G. Guidoboni,
D. Heberling,
N. Hempelmann,
V. Hejny,
J. Hetzel,
F. Hinder,
A. Kacharava,
V. Kamerdzhiev,
I. Keshelashvili,
I. Koop
, et al. (39 additional authors not shown)
Abstract:
Precision experiments, such as the search for electric dipole moments of charged particles using storage rings, demand for an understanding of the spin dynamics with unprecedented accuracy. The ultimate aim is to measure the electric dipole moments with a sensitivity up to 15 orders in magnitude better than the magnetic dipole moment of the stored particles. This formidable task requires an unders…
▽ More
Precision experiments, such as the search for electric dipole moments of charged particles using storage rings, demand for an understanding of the spin dynamics with unprecedented accuracy. The ultimate aim is to measure the electric dipole moments with a sensitivity up to 15 orders in magnitude better than the magnetic dipole moment of the stored particles. This formidable task requires an understanding of the background to the signal of the electric dipole from rotations of the spins in the spurious magnetic fields of a storage ring. One of the observables, especially sensitive to the imperfection magnetic fields in the ring is the angular orientation of stable spin axis. Up to now, the stable spin axis has never been determined experimentally, and in addition, the JEDI collaboration for the first time succeeded to quantify the background signals that stem from false rotations of the magnetic dipole moments in the horizontal and longitudinal imperfection magnetic fields of the storage ring. To this end, we developed a new method based on the spin tune response of a machine to artificially applied longitudinal magnetic fields. This novel technique, called \textit{spin tune mapping}, emerges as a very powerful tool to probe the spin dynamics in storage rings. The technique was experimentally tested in 2014 at the cooler synchrotron COSY, and for the first time, the angular orientation of the stable spin axis at two different locations in the ring has been determined to an unprecedented accuracy of better than $2.8μ$rad.
△ Less
Submitted 8 March, 2017; v1 submitted 3 March, 2017;
originally announced March 2017.
-
New method for a continuous determination of the spin tune in storage rings and implications for precision experiments
Authors:
D. Eversmann,
V. Hejny,
F. Hinder,
A. Kacharava,
J. Pretz,
F. Rathmann,
M. Rosenthal,
F. Trinkel,
S. Andrianov,
W. Augustyniak,
Z. Bagdasarian,
M. Bai,
W. Bernreuther,
S. Bertelli,
M. Berz,
J. Bsaisou,
S. Chekmenev,
D. Chiladze,
G. Ciullo,
M. Contalbrigo,
J. de Vries,
S. Dymov,
R. Engels,
F. M. Esser,
O. Felden
, et al. (76 additional authors not shown)
Abstract:
A new method to determine the spin tune is described and tested. In an ideal planar magnetic ring, the spin tune - defined as the number of spin precessions per turn - is given by $ν_s = γG$ (gamma is the Lorentz factor, $G$ the magnetic anomaly). For 970 MeV/c deuterons coherently precessing with a frequency of ~120 kHz in the Cooler Synchrotron COSY, the spin tune is deduced from the up-down asy…
▽ More
A new method to determine the spin tune is described and tested. In an ideal planar magnetic ring, the spin tune - defined as the number of spin precessions per turn - is given by $ν_s = γG$ (gamma is the Lorentz factor, $G$ the magnetic anomaly). For 970 MeV/c deuterons coherently precessing with a frequency of ~120 kHz in the Cooler Synchrotron COSY, the spin tune is deduced from the up-down asymmetry of deuteron carbon scattering. In a time interval of 2.6 s, the spin tune was determined with a precision of the order $10^{-8}$, and to $1 \cdot 10^{-10}$ for a continuous 100 s accelerator cycle. This renders the presented method a new precision tool for accelerator physics: controlling the spin motion of particles to high precision is mandatory, in particular, for the measurement of electric dipole moments of charged particles in a storage ring.
△ Less
Submitted 21 March, 2017; v1 submitted 2 April, 2015;
originally announced April 2015.
-
Search for polarization effects in the antiproton production process
Authors:
D. Grzonka,
K. Kilian,
J. Ritman,
T. Sefzick,
W. Oelert,
M. Diermaier,
E. Widmann,
J. Zmeskal,
B. Glowacz,
P. Moskal,
M. Zielinski,
M. Wolke,
P. Nadel-Turonski,
M. Carmignotto,
T. Horn,
H. Mkrtchyan,
A. Asaturyan,
A. Mkrtchyan,
V. Tadevosyan,
S. Zhamkochyan,
S. Malbrunot-Ettenauer,
W. Eyrich,
F. Hauenstein,
A. Zink
Abstract:
For the production of a polarized antiproton beam various methods have been suggested including the possibility that antiprotons may be produced polarized which will be checked experimentally. The polarization of antiprotons produced under typical conditions for antiproton beam preparation will be measured at the CERN/PS. If the production process creates some polarization a polarized antiproton b…
▽ More
For the production of a polarized antiproton beam various methods have been suggested including the possibility that antiprotons may be produced polarized which will be checked experimentally. The polarization of antiprotons produced under typical conditions for antiproton beam preparation will be measured at the CERN/PS. If the production process creates some polarization a polarized antiproton beam could be prepared by a rather simple modification of the antiproton beam facility. The detection setup and the expected experimental conditions are described.
△ Less
Submitted 23 January, 2015;
originally announced January 2015.
-
A recoil detector for the measurement of antiproton-proton elastic scattering at angles close to 90$^{\circ}$
Authors:
Q. Hu,
U. Bechstedt,
A. Gillitzer,
D. Grzonka,
A. Khoukaz,
F. Klehr,
A. Lehrach,
D. Prasuhn,
J. Ritman,
T. Sefzick,
T. Stockmann,
A. Täschner,
P. Wuestner,
H. Xu
Abstract:
The design and construction of a recoil detector for the measurement of recoil protons of antiproton-proton elastic scattering at scattering angles close to 90$^{\circ}$ are described. The performance of the recoil detector has been tested in the laboratory with radioactive sources and at COSY with proton beams by measuring proton-proton elastic scattering. The results of laboratory tests and comm…
▽ More
The design and construction of a recoil detector for the measurement of recoil protons of antiproton-proton elastic scattering at scattering angles close to 90$^{\circ}$ are described. The performance of the recoil detector has been tested in the laboratory with radioactive sources and at COSY with proton beams by measuring proton-proton elastic scattering. The results of laboratory tests and commissioning with beam are presented. Excellent energy resolution and proper working performance of the recoil detector validate the conceptual design of the KOALA experiment at HESR to provide the cross section data needed to achieve a precise luminosity determination at the PANDA experiment.
△ Less
Submitted 30 September, 2014;
originally announced September 2014.
-
One-Particle Measurement of the Antiproton Magnetic Moment
Authors:
ATRAP Collaboration,
J. DiSciacca,
M. Marshall,
K. Marable,
G. Gabrielse,
S. Ettenauer,
E. Tardiff,
R. Kalra,
D. W. Fitzakerley,
M. C. George,
E. A. Hessels,
C. H. Storry,
M. Weel,
D. Grzonka,
W. Oelert,
T. Sefzick
Abstract:
\DeclareRobustCommand{\pbar}{\HepAntiParticle{p}{}{}\xspace} \DeclareRobustCommand{\p}{\HepParticle{p}{}{}\xspace} \DeclareRobustCommand{\mup}{$μ_{p}${}{}\xspace} \DeclareRobustCommand{\mupbar}{$μ_{\pbar}${}{}\xspace} \DeclareRobustCommand{\muN}{$μ_N${}{}\xspace
For the first time a single trapped \pbar is used to measure the \pbar magnetic moment ${\bmμ}_{\pbar}$. The moment…
▽ More
\DeclareRobustCommand{\pbar}{\HepAntiParticle{p}{}{}\xspace} \DeclareRobustCommand{\p}{\HepParticle{p}{}{}\xspace} \DeclareRobustCommand{\mup}{$μ_{p}${}{}\xspace} \DeclareRobustCommand{\mupbar}{$μ_{\pbar}${}{}\xspace} \DeclareRobustCommand{\muN}{$μ_N${}{}\xspace
For the first time a single trapped \pbar is used to measure the \pbar magnetic moment ${\bmμ}_{\pbar}$. The moment ${\bmμ}_{\pbar} = μ_{\pbar} {\bm S}/(\hbar/2)$ is given in terms of its spin ${\bm S}$ and the nuclear magneton (\muN) by $μ_{\pbar}/μ_N = -2.792\,845 \pm 0.000\,012$. The 4.4 parts per million (ppm) uncertainty is 680 times smaller than previously realized. Comparing to the proton moment measured using the same method and trap electrodes gives $μ_{\pbar}/μ_p = -1.000\,000 \pm 0.000\,005$ to 5 ppm, for a proton moment ${\bmμ}_{p} = μ_{p} {\bm S}/(\hbar/2)$, consistent with the prediction of the CPT theorem.
△ Less
Submitted 4 February, 2013; v1 submitted 26 January, 2013;
originally announced January 2013.
-
Trapped Antihydrogen in Its Ground State
Authors:
G. Gabrielse,
R. Kalra,
W. S. Kolthammer,
R. McConnell,
P. Richerme,
D. Grzonka,
W. Oelert,
T. Sefzick,
M. Zielinski,
D. W. Fitzakerley,
M. C. George,
E. A. Hessels,
C. H. Storry,
M. Weel,
A. Müllers,
J. Walz
Abstract:
Antihydrogen atoms are confined in an Ioffe trap for 15 to 1000 seconds -- long enough to ensure that they reach their ground state. Though reproducibility challenges remain in making large numbers of cold antiprotons and positrons interact, 5 +/- 1 simultaneously-confined ground state atoms are produced and observed on average, substantially more than previously reported. Increases in the number…
▽ More
Antihydrogen atoms are confined in an Ioffe trap for 15 to 1000 seconds -- long enough to ensure that they reach their ground state. Though reproducibility challenges remain in making large numbers of cold antiprotons and positrons interact, 5 +/- 1 simultaneously-confined ground state atoms are produced and observed on average, substantially more than previously reported. Increases in the number of simultaneously trapped antithydrogen atoms are critical if laser-cooling of trapped antihydrogen is to be demonstrated, and spectroscopic studies at interesting levels of precision are to be carried out.
△ Less
Submitted 24 January, 2012; v1 submitted 12 January, 2012;
originally announced January 2012.
