Showing 1–7 of 7 results for author: Grierson, B

FUSE (Fusion Synthesis Engine): A Next Generation Framework for Integrated Design of Fusion Pilot Plants

Authors: O. Meneghini, T. Slendebroek, B. C. Lyons, K. McLaughlin, J. McClenaghan, L. Stagner, J. Harvey, T. F. Neiser, A. Ghiozzi, G. Dose, J. Guterl, A. Zalzali, T. Cote, N. Shi, D. Weisberg, S. P. Smith, B. A. Grierson, J. Candy

Abstract: The Fusion Synthesis Engine (FUSE) is a state-of-the-art software suite designed to revolutionize fusion power plant design. FUSE integrates first-principle models, machine learning, and reduced models into a unified framework, enabling comprehensive simulations that go beyond traditional 0D systems studies. FUSE's modular structure supports a hierarchy of model fidelities, from steady-state to ti… ▽ More The Fusion Synthesis Engine (FUSE) is a state-of-the-art software suite designed to revolutionize fusion power plant design. FUSE integrates first-principle models, machine learning, and reduced models into a unified framework, enabling comprehensive simulations that go beyond traditional 0D systems studies. FUSE's modular structure supports a hierarchy of model fidelities, from steady-state to time-dependent simulations, allowing for both pre-conceptual design and operational scenario development. This framework accelerates the design process by enabling self-consistent solutions across physics, engineering, and control systems, minimizing the need for iterative expert evaluations. Leveraging modern software practices and parallel computing, FUSE also provides multi-objective optimization, balancing cost, efficiency, and operational constraints. Developed in Julia, FUSE is fully open-source under the Apache 2.0 license, promoting transparency and collaboration within the fusion research community. △ Less

Submitted 2 September, 2024; originally announced September 2024.

Integrated modeling of boron powder injection for real-time plasma-facing component conditioning

Authors: Florian Effenberg, Klaus Schmid, Federico Nespoli, Alessandro Bortolon, Yühe Feng, Brian A. Grierson, Jeremy D. Lore, Rajesh Maingi, Dmitry L. Rudakov

Abstract: An integrated modeling framework for investigating the application of solid boron powder injection for real-time surface conditioning of plasma-facing components in tokamak environments is presented. Utilizing the DIII-D impurity powder dropper setup, this study simulates B powder injection scenarios ranging from mg/s to tens of mg/s, corresponding to B flux rates of $10^{20}-10^{21}$ B/s in stand… ▽ More An integrated modeling framework for investigating the application of solid boron powder injection for real-time surface conditioning of plasma-facing components in tokamak environments is presented. Utilizing the DIII-D impurity powder dropper setup, this study simulates B powder injection scenarios ranging from mg/s to tens of mg/s, corresponding to B flux rates of $10^{20}-10^{21}$ B/s in standard L-mode conditions. The comprehensive modeling approach combines EMC3-EIRENE for simulating the D plasma background and DIS for the ablation and transport of the B powder particles. The results show substantial transport of B to the inboard lower divertor, predominantly influenced by the main ion plasma flow. The dependency on powder particle size (5-250 $μ$m) was found to be insignificant for the scenario considered. The effects of erosion and redeposition were considered to reconcile the discrepancies with experimental observations, which saw substantial deposition on the outer divertor PFCs. For this purpose, the WallDYN3D code was updated to include B sources within the plasma domain and integrated into the modeling framework. The mixed-material migration modeling shows evolving B deposition patterns, suggesting the formation of mixed B-C layers or predominantly B coverage depending on the powder mass flow rate. While the modeling outcomes at lower B injection rates tend to align with experimental observations, the prediction of near-pure B layers at higher rates has yet to be experimentally verified in the C environment of the DIII-D tokamak. The extensive reach of B layers found in the modeling suggests the need for modeling that encompasses the entire wall geometry for more accurate experimental correlations. This integrated approach sets a precedent for analyzing and applying real-time in-situ boron coating techniques in advanced tokamak scenarios, potentially extendable to ITER. △ Less

Submitted 6 December, 2024; v1 submitted 30 June, 2024; originally announced July 2024.

Journal ref: Nuclear Materials and Energy (2024)

TRANSP integrated modeling code for interpretive and predictive analysis of tokamak plasmas

Authors: A. Y Pankin, J. Breslau, M. Gorelenkova, R. Andre, B. Grierson, J. Sachdev, M. Goliyad, G. Perumpilly

Abstract: This paper provides a comprehensive review of the TRANSP code, a sophisticated tool for interpretive and predictive analysis of tokamak plasmas, detailing its major capabilities and features. It describes the equations for particle, power, and momentum balance analysis, as well as the poloidal field diffusion equations. The paper outlines the spatial and time grids used in TRANSP and details the e… ▽ More This paper provides a comprehensive review of the TRANSP code, a sophisticated tool for interpretive and predictive analysis of tokamak plasmas, detailing its major capabilities and features. It describes the equations for particle, power, and momentum balance analysis, as well as the poloidal field diffusion equations. The paper outlines the spatial and time grids used in TRANSP and details the equilibrium assumptions and solvers. Various models for heating and current drive \mc{and radiation}, including updates to the NUBEAM model, are discussed. The handling of large-scale events such as sawtooth crashes and pellet injections is examined, along with the predictive capabilities for advancing plasma profiles. The integration of TRANSP with the ITER Integrated Modeling and Analysis Suite (IMAS) is highlighted, demonstrating enhanced data access and analysis capabilities. Additionally, the paper discusses best practices and continuous integration techniques to enhance TRANSP's robustness. The suite of TRANSP tools, designed for efficient data analysis and simulation, further supports the optimization of tokamak operations and coupling with other tokamak codes. Continuous development and support ensure that TRANSP remains a major code for the analysis of experimental data for controlled thermonuclear fusion, maintaining its critical role in supporting the optimization of tokamak operations and advancing fusion research. △ Less

Submitted 23 February, 2025; v1 submitted 11 June, 2024; originally announced June 2024.

Comments: Submitted to Computer Physics Communications

Implementation of AI/Deep Learning Disruption Predictor into a Plasma Control System

Authors: William Tang, Ge Dong, Jayson Barr, Keith Erickson, Rory Conlin, M. Dan Boyer, Julian Kates-Harbeck, Kyle Felker, Cristina Rea, Nikolas C. Logan, Alexey Svyatkovskiy, Eliot Feibush, Joseph Abbatte, Mitchell Clement, Brian Grierson, Raffi Nazikian, Zhihong Lin, David Eldon, Auna Moser, Mikhail Maslov

Abstract: This paper reports on advances to the state-of-the-art deep-learning disruption prediction models based on the Fusion Recurrent Neural Network (FRNN) originally introduced a 2019 Nature publication. In particular, the predictor now features not only the disruption score, as an indicator of the probability of an imminent disruption, but also a sensitivity score in real-time to indicate the underlyi… ▽ More This paper reports on advances to the state-of-the-art deep-learning disruption prediction models based on the Fusion Recurrent Neural Network (FRNN) originally introduced a 2019 Nature publication. In particular, the predictor now features not only the disruption score, as an indicator of the probability of an imminent disruption, but also a sensitivity score in real-time to indicate the underlying reasons for the imminent disruption. This adds valuable physics-interpretability for the deep-learning model and can provide helpful guidance for control actuators now that it is fully implemented into a modern Plasma Control System (PCS). The advance is a significant step forward in moving from modern deep-learning disruption prediction to real-time control and brings novel AI-enabled capabilities relevant for application to the future burning plasma ITER system. Our analyses use large amounts of data from JET and DIII-D vetted in the earlier NATURE publication. In addition to when a shot is predicted to disrupt, this paper addresses reasons why by carrying out sensitivity studies. FRNN is accordingly extended to use many more channels of information, including measured DIII-D signals such as (i) the n1rms signal that is correlated with the n =1 modes with finite frequency, including neoclassical tearing mode and sawtooth dynamics, (ii) the bolometer data indicative of plasma impurity content, and (iii) q-min, the minimum value of the safety factor relevant to the key physics of kink modes. The additional channels and interpretability features expand the ability of the deep learning FRNN software to provide information about disruption subcategories as well as more precise and direct guidance for the actuators in a plasma control system. △ Less

Submitted 4 April, 2022; originally announced April 2022.

Mitigation of plasma-wall interactions with low-Z powders in DIII-D high confinement plasmas

Authors: Florian Effenberg, Alessandro Bortolon, Livia Casali, Raffi Nazikian, Igor Bykov, Filippo Scotti, Huiqian Q. Wang, Max E. Fenstermacher, Robert Lunsford, Alexander Nagy, Brian A. Grierson, Florian M. Laggner, Rajesh Maingi, the DIII-D Team

Abstract: Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-a… ▽ More Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-angle slot (SAS) divertor for 2-s intervals at constant rates of 3-204 mg/s. The multi-species BN powders at a rate of 54 mg/s showed the most substantial increase in divertor neutral compression by more than an order of magnitude and lasting detachment with minor degradation of the stored magnetic energy $W_{mhd}$ by 5%. Rates of 204 mg/s of boron nitride powder further reduce ELM-fluxes on the divertor but also cause a drop in confinement performance by 24% due to the onset of an $n=2$ tearing mode. The application of powders also showed a substantial improvement of wall conditions manifesting in reduced wall fueling source and intrinsic carbon and oxygen content in response to the cumulative injection of non-recycling materials. The results suggest that low-Z powder injection, including mixed element compounds, is a promising new core-edge compatible technique that simultaneously enables divertor detachment and improves wall conditions during high confinement operation. △ Less

Submitted 16 August, 2022; v1 submitted 28 March, 2022; originally announced March 2022.

Comments: F. Effenberg et al 2022 Nucl. Fusion in press https://doi.org/10.1088/1741-4326/ac899d

Journal ref: Nucl. Fusion 62 106015 (2022)

Wide operational windows of edge-localized mode suppression by resonant magnetic perturbations in the DIII-D tokamak

Authors: Q. M. Hu, R. Nazikian, B. A. Grierson, N. C. Logan, D. M. Orlov, C. Paz-Soldan, Q. Yu

Abstract: Edge-Localized-Mode (ELM) suppression by resonant magnetic perturbations (RMPs) generally occurs over very narrow ranges of the plasma current (or magnetic safety factor q95) in the DIII-D tokamak. However, wide q95 ranges of ELM suppression are needed for the safety and operational flexibility of ITER and future reactors. In DIII-D ITER Similar Shape (ISS) plasmas with n=3 RMPs, the range of q95… ▽ More Edge-Localized-Mode (ELM) suppression by resonant magnetic perturbations (RMPs) generally occurs over very narrow ranges of the plasma current (or magnetic safety factor q95) in the DIII-D tokamak. However, wide q95 ranges of ELM suppression are needed for the safety and operational flexibility of ITER and future reactors. In DIII-D ITER Similar Shape (ISS) plasmas with n=3 RMPs, the range of q95 for ELM suppression is found to increase with decreasing electron density. Nonlinear two-fluid MHD simulations reproduce the observed q95 windows of ELM suppression and the dependence on plasma density, based on the conditions for resonant field penetration at the top of the pedestal. When the RMP amplitude is close to the threshold for resonant field penetration, only narrow isolated magnetic islands form near the top of the pedestal, leading to narrow q95 windows of ELM suppression. However, as the threshold for field penetration decreases with decreasing density, resonant field penetration can take place over a wider range of q95. For sufficiently low density (penetration threshold) multiple magnetic islands form near the top of the pedestal giving rise to continuous q95 windows of ELM suppression. The model predicts that wide q95 windows of ELM suppression can be achieved at substantially higher pedestal pressure in DIII-D by shifting to higher toroidal mode number (n=4) RMPs. △ Less

Submitted 30 June, 2020; v1 submitted 13 December, 2019; originally announced December 2019.

Journal ref: Phys. Rev. Lett. 125, 045001 (2020)

The Density Dependence of Edge-Localized-Mode Suppression and Pump-out by Resonant Magnetic Perturbations in the DIII-D Tokamak

Authors: Q. M. Hu, R. Nazikian, B. Grierson, N. C. Logan, J-K. Park, C. Paz-Soldan, Q. Yu

Abstract: The density dependence of edge-localized-mode (ELM) suppression and density pump-out (density reduction) by n = 2 resonant magnetic perturbations (RMPs) is consistent with the effects of narrow well-separated magnetic islands at the top and bottom of the H-mode pedestal in DIII-D low-collisionality plasmas. Nonlinear two-fluid MHD simulations for DIII-D ITER Similar Shape (ISS) discharges show tha… ▽ More The density dependence of edge-localized-mode (ELM) suppression and density pump-out (density reduction) by n = 2 resonant magnetic perturbations (RMPs) is consistent with the effects of narrow well-separated magnetic islands at the top and bottom of the H-mode pedestal in DIII-D low-collisionality plasmas. Nonlinear two-fluid MHD simulations for DIII-D ITER Similar Shape (ISS) discharges show that, at low collisionality, low pedestal density is required for resonant field penetration at the pedestal top, consistent with the ubiquitous low density requirement for ELM suppression in these DIII-D plasmas. The simulations predict a drop in the pedestal pressure due to parallel transport across these narrow width (0.02) magnetic islands at the top of the pedestal that is stabilizing to Peeling-Ballooning-Modes (PBMs), and comparable to the pedestal pressure reduction observed in experiment at the onset of ELM suppression. The simulations predict density pump-out at experimentally relevant levels (-20%) at low pedestal collisionality due to very narrow (~0.01-0.02) RMP driven magnetic islands at the pedestal foot at ~0.99. The simulations show decreasing pump-out with increasing density, consistent with experiment, resulting from the inverse dependence of parallel particle transport on resistivity at the foot of the pedestal. The robust screening of resonant fields is predicted between the top and bottom of the pedestal during density pump-out and ELM suppression, consistent with the preservation of strong temperature gradients in the edge transport barrier as seen in experiment. △ Less

Submitted 13 December, 2019; v1 submitted 30 October, 2019; originally announced October 2019.

Journal ref: Physics of Plasmas, 2019