-
Automated control and optimisation of laser driven ion acceleration
Authors:
B. Loughran,
M. J. V. Streeter,
H. Ahmed,
S. Astbury,
M. Balcazar,
M. Borghesi,
N. Bourgeois,
C. B. Curry,
S. J. D. Dann,
S. DiIorio,
N. P. Dover,
T. Dzelzanis,
O. C. Ettlinger,
M. Gauthier,
L. Giuffrida,
G. D. Glenn,
S. H. Glenzer,
J. S. Green,
R. J. Gray,
G. S. Hicks,
C. Hyland,
V. Istokskaia,
M. King,
D. Margarone,
O. McCusker
, et al. (10 additional authors not shown)
Abstract:
The interaction of relativistically intense lasers with opaque targets represents a highly non-linear, multi-dimensional parameter space. This limits the utility of sequential 1D scanning of experimental parameters for the optimisation of secondary radiation, although to-date this has been the accepted methodology due to low data acquisition rates. High repetition-rate (HRR) lasers augmented by ma…
▽ More
The interaction of relativistically intense lasers with opaque targets represents a highly non-linear, multi-dimensional parameter space. This limits the utility of sequential 1D scanning of experimental parameters for the optimisation of secondary radiation, although to-date this has been the accepted methodology due to low data acquisition rates. High repetition-rate (HRR) lasers augmented by machine learning present a valuable opportunity for efficient source optimisation. Here, an automated, HRR-compatible system produced high fidelity parameter scans, revealing the influence of laser intensity on target pre-heating and proton generation. A closed-loop Bayesian optimisation of maximum proton energy, through control of the laser wavefront and target position, produced proton beams with equivalent maximum energy to manually-optimized laser pulses but using only 60% of the laser energy. This demonstration of automated optimisation of laser-driven proton beams is a crucial step towards deeper physical insight and the construction of future radiation sources.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Calibration of BAS-TR image plate response to GeV gold ions
Authors:
D. Doria,
P. Martin,
H. Ahmed,
A. Alejo,
M. Cerchez,
S. Ferguson,
J. Fernandez-Tobias,
J. S. Green,
D. Gwynne,
F. Hanton,
J. Jarrett,
D. A. Maclellan,
A. McIlvenny,
P. McKenna,
J. A. Ruiz,
M. Swantusch,
O. Willi,
S. Zhai,
M. Borghesi,
S. Kar
Abstract:
The response of the BAS-TR image plate (IP) was absolutely calibrated using CR-39 track detector for high linear energy transfer (LET) Au ions up to $\sim$1.6 GeV (8.2 MeV/nucleon), accelerated by high-power lasers. The calibration was carried out by employing a high-resolution Thomson parabola spectrometer, which allowed resolving Au ions with closely spaced ionization states up to 58$^+$. A resp…
▽ More
The response of the BAS-TR image plate (IP) was absolutely calibrated using CR-39 track detector for high linear energy transfer (LET) Au ions up to $\sim$1.6 GeV (8.2 MeV/nucleon), accelerated by high-power lasers. The calibration was carried out by employing a high-resolution Thomson parabola spectrometer, which allowed resolving Au ions with closely spaced ionization states up to 58$^+$. A response function was obtained by fitting the photo-stimulated luminescence (PSL) per Au ion for different ion energies, which is broadly in agreement with that expected from ion stopping in the active layer of the IP. This calibration would allow quantifying the ion energy spectra for high energy Au ions, which is important for further investigation of the laser-based acceleration of heavy ion beams.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Characterisation of deuterium spectra from laser driven multi-species sources by employing differentially filtered image plate detectors in Thomson spectrometers
Authors:
A. Alejo,
S. Kar,
H. Ahmed,
A. G. Krygier,
D. Doria,
R. Clarke,
J. Fernandez,
R. R. Freeman,
J. Fuchs,
A. Green,
J. S. Green,
D. Jung,
A. Kleinschmidt,
C. L. S. Lewis,
J. T. Morrison,
Z. Najmudin,
H. Nakamura,
G. Nersisyan,
P. Norreys,
M. Notley,
M. Oliver,
M. Roth,
J. A. Ruiz,
L. Vassura,
M. Zepf
, et al. (1 additional authors not shown)
Abstract:
A novel method for characterising the full spectrum of deuteron ions emitted by laser driven multi-species ion sources is discussed. The procedure is based on using differential filtering over the detector of a Thompson parabola ion spectrometer, which enables discrimination of deuterium ions from heavier ion species with the same charge-to-mass ratio (such as C6+, O8+, etc.). Commonly used Fuji I…
▽ More
A novel method for characterising the full spectrum of deuteron ions emitted by laser driven multi-species ion sources is discussed. The procedure is based on using differential filtering over the detector of a Thompson parabola ion spectrometer, which enables discrimination of deuterium ions from heavier ion species with the same charge-to-mass ratio (such as C6+, O8+, etc.). Commonly used Fuji Image plates were used as detectors in the spectrometer, whose absolute response to deuterium ions over a wide range of energies was calibrated by using slotted CR-39 nuclear track detectors. A typical deuterium ion spectrum diagnosed in a recent experimental campaign is presented.
△ Less
Submitted 14 September, 2014; v1 submitted 13 August, 2014;
originally announced August 2014.
-
Micron-Scale Mapping of Megagauss Magnetic Fields in Petawatt Laser-Solid Interactions
Authors:
Gourab Chatterjee,
Prashant Kumar Singh,
A. P. L. Robinson,
N. Booth,
O. Culfa,
R. J. Dance,
L. A. Gizzi,
R. J. Gray,
J. S. Green,
P. Koester,
G. Ravindra Kumar,
L. Labate,
Amit D. Lad,
K. L. Lancaster,
J. Pasley,
N. C. Woolsey,
P. P. Rajeev
Abstract:
We report spatially and temporally resolved measurements of magnetic fields generated by petawatt laser-solid interactions with high spatial resolution, using optical polarimetry. The polarimetric measurements map the megagauss magnetic field profiles generated by the fast electron currents at the target rear. The magnetic fields at the rear of a 50 $μ$m thick aluminum target exhibit distinct and…
▽ More
We report spatially and temporally resolved measurements of magnetic fields generated by petawatt laser-solid interactions with high spatial resolution, using optical polarimetry. The polarimetric measurements map the megagauss magnetic field profiles generated by the fast electron currents at the target rear. The magnetic fields at the rear of a 50 $μ$m thick aluminum target exhibit distinct and unambiguous signatures of electron beam filamentation. These results are corroborated by hybrid simulations.
△ Less
Submitted 30 July, 2013;
originally announced July 2013.
-
Micron-scale Fast Electron Filamentation and Recirculation determined from Rear Side Optical Emission in High Intensity Laser-Solid Interactions
Authors:
C. Bellei,
S. R. Nagel,
S. Kar,
A. Henig,
S. Kneip,
C. Palmer,
A. Sävert,
L. Willingale,
D. Carroll,
B. Dromey,
J. S. Green,
K. Markey,
P. Simpson,
R. J. Clarke,
H. Lowe,
D. Neely,
C. Spindloe,
M. Tolley,
M. Kaluza,
S. P. D. Mangles,
P. McKenna,
P. A. Norreys,
J. Schreiber,
M. Zepf,
J. R. Davies
, et al. (2 additional authors not shown)
Abstract:
The transport of relativistic electrons generated in the interaction of petawatt class lasers with solid targets has been studied through measurements of the optical emission from their rear surface. The high degree of polarization of the emission indicates that it is predominantly optical transition radiation. A halo that surrounds the main region of emission is also polarized, and is attribute…
▽ More
The transport of relativistic electrons generated in the interaction of petawatt class lasers with solid targets has been studied through measurements of the optical emission from their rear surface. The high degree of polarization of the emission indicates that it is predominantly optical transition radiation. A halo that surrounds the main region of emission is also polarized, and is attributed to the effect of electron recirculation. The variation of the amplitude of the transition radiation with respect to observation angle provides evidence for the presence of {$μ$m-size} filaments.
△ Less
Submitted 25 February, 2010;
originally announced February 2010.
-
Dynamic Control of Laser Produced Proton Beams
Authors:
S. Kar,
K. Markey,
P. T. Simpson,
B. Dromey,
M. Borghesi,
M. Zepf,
C. Bellei,
S. R. Nagel,
S. Kneip,
L. Willingale,
Z. Najmudin,
K. Krushelnick,
J. S. Green,
P. Norreys,
R. J. Clarke,
D. Neely,
D. C. Carroll,
P. McKenna,
E. L. Clark
Abstract:
The emission characteristics of intense laser driven protons are controlled using ultra-strong (of the order of 10^9 V/m) electrostatic fields varying on a few ps timescale. The field structures are achieved by exploiting the high potential of the target (reaching multi-MV during the laser interaction). Suitably shaped targets result in a reduction in the proton beam divergence, and hence an inc…
▽ More
The emission characteristics of intense laser driven protons are controlled using ultra-strong (of the order of 10^9 V/m) electrostatic fields varying on a few ps timescale. The field structures are achieved by exploiting the high potential of the target (reaching multi-MV during the laser interaction). Suitably shaped targets result in a reduction in the proton beam divergence, and hence an increase in proton flux while preserving the high beam quality. The peak focusing power and its temporal variation are shown to depend on the target characteristics, allowing for the collimation of the inherently highly divergent beam and the design of achromatic electrostatic lenses.
△ Less
Submitted 22 October, 2007;
originally announced October 2007.
