Showing 1–13 of 13 results for author: Grass, D

Photon Counting Interferometry to Detect Geontropic Space-Time Fluctuations with GQuEST

Authors: Sander M. Vermeulen, Torrey Cullen, Daniel Grass, Ian A. O. MacMillan, Alexander J. Ramirez, Jeffrey Wack, Boris Korzh, Vincent S. H. Lee, Kathryn M. Zurek, Chris Stoughton, Lee McCuller

Abstract: The GQuEST (Gravity from the Quantum Entanglement of Space-Time) experiment uses tabletop-scale Michelson laser interferometers to probe for fluctuations in space-time. We present a practicable interferometer design featuring a novel photon counting readout method that provides unprecedented sensitivity, as it is not subject to the interferometric standard quantum limit. We evaluate the potential… ▽ More The GQuEST (Gravity from the Quantum Entanglement of Space-Time) experiment uses tabletop-scale Michelson laser interferometers to probe for fluctuations in space-time. We present a practicable interferometer design featuring a novel photon counting readout method that provides unprecedented sensitivity, as it is not subject to the interferometric standard quantum limit. We evaluate the potential of this design to measure space-time fluctuations motivated by recent `geontropic' quantum gravity models. The accelerated accrual of Fisher information offered by the photon counting readout enables GQuEST to detect the predicted quantum gravity phenomena within measurement times at least 100 times shorter than equivalent conventional interferometers. The GQuEST design thus enables a fast and sensitive search for signatures of quantum gravity in a laboratory-scale experiment. △ Less

Submitted 14 February, 2025; v1 submitted 11 April, 2024; originally announced April 2024.

Comments: Published in PRX

Journal ref: Phys. Rev. X 15, 011034, Published 14 February, 2025

Noninvasive identification of carbon-based black pigments with pump-probe microscopy

Authors: Heidi V. Kastenholz, Michael I. Topper, Warren S. Warren, Martin C. Fischer, David Grass

Abstract: Carbon-based black pigments, a widely used class of pigments, are difficult to differentiate with the noninvasive techniques currently used in cultural heritage science. We utilize pump-probe microscopy to distinguish four common carbon-based black pigments as pure pigments, as two-component black pigment mixtures, and as a mixture of a black and a colorful pigment. This work also demonstrates tha… ▽ More Carbon-based black pigments, a widely used class of pigments, are difficult to differentiate with the noninvasive techniques currently used in cultural heritage science. We utilize pump-probe microscopy to distinguish four common carbon-based black pigments as pure pigments, as two-component black pigment mixtures, and as a mixture of a black and a colorful pigment. This work also demonstrates that even nominally homogeneous pigments present remarkable, and useful, heterogeneity in pump-probe microscopy. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Non-destructive Three-dimensional Imaging of Artificially Degraded CdS Paints by Pump-probe Microscopy

Authors: Yue Zhou, David Grass, Warren S. Warren, Martin C. Fischer

Abstract: Cadmium sulfide (CdS) pigments have degraded in several well-known paintings, but the mechanisms of degradation have yet to be fully understood. Traditional non-destructive analysis techniques primarily focus on macroscopic degradation, whereas microscopic information is typically obtained with invasive techniques that require sample removal. Here, we demonstrate the use of pump-probe microscopy t… ▽ More Cadmium sulfide (CdS) pigments have degraded in several well-known paintings, but the mechanisms of degradation have yet to be fully understood. Traditional non-destructive analysis techniques primarily focus on macroscopic degradation, whereas microscopic information is typically obtained with invasive techniques that require sample removal. Here, we demonstrate the use of pump-probe microscopy to nondestructively visualize the three-dimensional structure and degradation progress of CdS pigments in oil paints. CdS pigments, reproduced following historical synthesis methods, were artificially aged by exposure to high relative humidity (RH) and ultraviolet (UV) light. Pump-probe microscopy was applied to track the degradation progress in single grains, and volumetric imaging revealed early CdS degradation of small particles and on the surface of large particles. This indicates that the particle dimension influences the extent and evolution of degradation of historical CdS. In addition, the pump-probe signal decrease in degraded CdS is observable before visible changes to the eye, demonstrating that pump-probe microscopy is a promising tool to detect early-stage degradation in artworks. The observed degradation by pump-probe microscopy occurred through the conversion from CdS into CdSO4.xH2O, verified by both FTIR (Fourier-transform infrared) and XPS (X-ray photoelectron spectroscopy) experiment. △ Less

Submitted 20 October, 2023; originally announced October 2023.

Contrast mechanisms in pump-probe microscopy of melanin

Authors: David Grass, Georgia M. Beasley, Martin C. Fischer, M. Angelica Selim, Yue Zhou, Warren S. Warren

Abstract: Pump-probe microscopy of melanin in tumors has been proposed to improve diagnosis of malignant melanoma, based on the hypothesis that aggressive cancers disaggregate melanin structure. However, measured signals of melanin are complex superpositions of multiple nonlinear processes, which makes interpretation challenging. Polarization control during measurement and data fitting is used to decompose… ▽ More Pump-probe microscopy of melanin in tumors has been proposed to improve diagnosis of malignant melanoma, based on the hypothesis that aggressive cancers disaggregate melanin structure. However, measured signals of melanin are complex superpositions of multiple nonlinear processes, which makes interpretation challenging. Polarization control during measurement and data fitting is used to decompose signals of melanin into their underlying molecular mechanisms. We then identify the molecular mechanisms that are most susceptible to melanin disaggregation and derive false-coloring schemes to highlight these processes in biological tissue. We exemplary demonstrate that false-colored images of a small set of melanoma tumors correlate with clinical concern. More generally, our systematic approach of decomposing pump-probe signals can be applied to a multitude of different samples. △ Less

Submitted 1 July, 2022; originally announced July 2022.

Comments: 12 pages, 4 figures

Optical trapping of high-aspect-ratio NaYF hexagonal prisms for kHz-MHz gravitational wave detectors

Authors: George Winstone, Zhiyuan Wang, Shelby Klomp, Greg Felsted, Andrew Laeuger, Daniel Grass, Nancy Aggarwal, Jacob Sprague, Peter J. Pauzauskie, Shane L. Larson, Vicky Kalogera, Andrew A. Geraci

Abstract: We present experimental results on optical trapping of Yb-doped $β-$NaYF sub-wavelength-thickness high-aspect-ratio hexagonal prisms with a micron-scale radius. The prisms are trapped in vacuum using an optical standing wave, oriented with the normal vector to their face along the beam propagation direction, and exhibit characteristic modes of three translational and two torsional degrees of freed… ▽ More We present experimental results on optical trapping of Yb-doped $β-$NaYF sub-wavelength-thickness high-aspect-ratio hexagonal prisms with a micron-scale radius. The prisms are trapped in vacuum using an optical standing wave, oriented with the normal vector to their face along the beam propagation direction, and exhibit characteristic modes of three translational and two torsional degrees of freedom. The measured motional spectra are compared with numerical simulations. This plate-like geometry simultaneously enables trapping with low photon-recoil-heating, high mass, and high trap frequency, potentially leading to advances in high frequency gravitational wave searches in the Levitated Sensor Detector (LSD), currently under construction. The material used here has previously been shown to exhibit internal cooling via laser refrigeration when optically trapped and illuminated with light of suitable wavelength. Employing such laser refrigeration methods in the context of our work may enable higher trapping intensity thus and higher trap frequencies for gravitational wave searches approaching the several hundred kHz range. △ Less

Submitted 25 April, 2022; v1 submitted 22 April, 2022; originally announced April 2022.

Comments: Title and Fig. 1 updated, minor changes, prepared for journal submission

Scanning force sensing at $μ$m-distances from a conductive surface with nanospheres in an optical lattice

Authors: Cris Montoya, Eduardo Alejandro, William Eom, Daniel Grass, Nicolas Clarisse, Apryl Witherspoon, Andrew A. Geraci

Abstract: The center-of-mass motion of optically trapped dielectric nanoparticles in vacuum is extremely well-decoupled from its environment, making a powerful tool for measurements of feeble sub-attonewton forces. We demonstrate a method to trap and manuever nanoparticles in an optical standing wave potential formed by retro-reflecting a laser beam from a metallic mirror surface. We can reliably position a… ▽ More The center-of-mass motion of optically trapped dielectric nanoparticles in vacuum is extremely well-decoupled from its environment, making a powerful tool for measurements of feeble sub-attonewton forces. We demonstrate a method to trap and manuever nanoparticles in an optical standing wave potential formed by retro-reflecting a laser beam from a metallic mirror surface. We can reliably position a $\sim 170$ nm diameter silica nanoparticle at distances of a few hundred nanometers to tens of microns from the surface of a gold-coated silicon mirror by transferring it from a single-beam tweezer trap into the standing wave potential. We can further scan the two dimensional space parallel to the mirror surface by using a piezo-driven mirror. This method enables three-dimensional scanning force sensing near surfaces using optically trapped nanoparticles, promising for high-sensitivity scanning force microscopy, tests of the Casimir effect, and tests of the gravitational inverse square law at micron scales. △ Less

Submitted 4 March, 2021; originally announced March 2021.

Comments: 6 pages, 3 figures

Beyond intensity modulation: new approaches to pump-probe microscopy

Authors: Jun Jiang, David Grass, Yue Zhou, Warren S. Warren, Martin C. Fischer

Abstract: Pump-probe microscopy is an emerging nonlinear imaging technique based on high repetition rate lasers and fast intensity modulation. Here we present new methods for pump-probe microscopy that keep the beam intensity constant and instead modulate the inter-pulse time delay, the relative polarization, or the pulse length. These techniques can improve image quality for samples that have poor heat dis… ▽ More Pump-probe microscopy is an emerging nonlinear imaging technique based on high repetition rate lasers and fast intensity modulation. Here we present new methods for pump-probe microscopy that keep the beam intensity constant and instead modulate the inter-pulse time delay, the relative polarization, or the pulse length. These techniques can improve image quality for samples that have poor heat dissipation or long-lived radiative states, and can selectively address nonlinear interactions in the sample. We experimentally demonstrate this approach and point out the advantages over conventional intensity modulation. △ Less

Submitted 18 December, 2020; v1 submitted 16 December, 2020; originally announced December 2020.

Motional Quantum Ground State of a Levitated Nanoparticle from Room Temperature

Authors: Uroš Delić, Manuel Reisenbauer, Kahan Dare, David Grass, Vladan Vuletić, Nikolai Kiesel, Markus Aspelmeyer

Abstract: We report quantum ground state cooling of a levitated nanoparticle in a room temperature environment. Using coherent scattering into an optical cavity we cool the center of mass motion of a $143$ nm diameter silica particle by more than $7$ orders of magnitude to $n_x=0.43\pm0.03$ phonons along the cavity axis, corresponding to a temperature of $12~μ$K. We infer a heating rate of… ▽ More We report quantum ground state cooling of a levitated nanoparticle in a room temperature environment. Using coherent scattering into an optical cavity we cool the center of mass motion of a $143$ nm diameter silica particle by more than $7$ orders of magnitude to $n_x=0.43\pm0.03$ phonons along the cavity axis, corresponding to a temperature of $12~μ$K. We infer a heating rate of $Γ_x/2π= 21\pm 3$ kHz, which results in a coherence time of $7.6~μ$s -- or $15$ coherent oscillations -- while the particle is optically trapped at a pressure of $10^{-6}$ mbar. The inferred optomechanical coupling rate of $g_x/2π= 71$ kHz places the system well into the regime of strong cooperativity ($C \approx 5$). We expect that a combination of ultra-high vacuum with free-fall dynamics will allow to further expand the spatio-temporal coherence of such nanoparticles by several orders of magnitude, thereby opening up new opportunities for macrosopic quantum experiments. △ Less

Submitted 22 November, 2019; v1 submitted 11 November, 2019; originally announced November 2019.

Comments: Extended methodology

Levitated cavity optomechanics in high vacuum

Authors: Uroš Delić, David Grass, Manuel Reisenbauer, Tobias Damm, Martin Weitz, Nikolai Kiesel, Markus Aspelmeyer

Abstract: We report dispersive coupling of an optically trapped silica nanoparticle ($143~$nm diameter) to the field of a driven Fabry-Perot cavity in high vacuum ($4.3\times 10^{-6}~$mbar). We demonstrate nanometer-level control in positioning the particle with respect to the intensity distribution of the cavity field, which allows access to linear, quadratic and tertiary optomechanical interactions in the… ▽ More We report dispersive coupling of an optically trapped silica nanoparticle ($143~$nm diameter) to the field of a driven Fabry-Perot cavity in high vacuum ($4.3\times 10^{-6}~$mbar). We demonstrate nanometer-level control in positioning the particle with respect to the intensity distribution of the cavity field, which allows access to linear, quadratic and tertiary optomechanical interactions in the resolved sideband regime. We determine all relevant coupling rates of the system, i.e. mechanical and optical losses as well as optomechanical interaction, and obtain a quantum cooperativity of $C_Q = 0.01$. Based on the presented performance the regime of strong cooperativity ($C_Q > 1$) is clearly within reach by further decreasing the mode volume of the cavity. △ Less

Submitted 18 February, 2019; originally announced February 2019.

Cavity cooling of a levitated nanosphere by coherent scattering

Authors: Uroš Delić, Manuel Reisenbauer, David Grass, Nikolai Kiesel, Vladan Vuletić, Markus Aspelmeyer

Abstract: We report three-dimensional cooling of a levitated nanoparticle inside an optical cavity. The cooling mechanism is provided by cavity-enhanced coherent scattering off an optical tweezer. The observed 3D dynamics and cooling rates are as theoretically expected from the presence of both linear and quadratic terms in the interaction between the particle motion and the cavity field. By achieving nanom… ▽ More We report three-dimensional cooling of a levitated nanoparticle inside an optical cavity. The cooling mechanism is provided by cavity-enhanced coherent scattering off an optical tweezer. The observed 3D dynamics and cooling rates are as theoretically expected from the presence of both linear and quadratic terms in the interaction between the particle motion and the cavity field. By achieving nanometer-level control over the particle location we optimize the position-dependent coupling and demonstrate axial cooling by two orders of magnitude at background pressures as high as $6\times10^{-2}$ mbar. We also estimate a significant ($> 40$ dB) suppression of laser phase noise, and hence of residual heating, which is a specific feature of the coherent scattering scheme. The observed performance implies that quantum ground state cavity cooling of levitated nanoparticles can be achieved for background pressures below $10^{-7}$ mbar. △ Less

Submitted 5 February, 2019; v1 submitted 21 December, 2018; originally announced December 2018.

Journal ref: Phys. Rev. Lett. 122, 123602 (2019)

Near-field coupling of a levitated nanoparticle to a photonic crystal cavity

Authors: Lorenzo Magrini, Richard A. Norte, Ralf Riedinger, Igor Marinković, David Grass, Uroš Delić, Simon Gröblacher, Sungkun Hong, Markus Aspelmeyer

Abstract: Quantum control of levitated dielectric particles is an emerging subject in quantum optomechanics. A major challenge is to efficiently measure and manipulate the particle's motion at the Heisenberg uncertainty limit. Here we present a nanophotonic interface suited to address this problem. By optically trapping a 150 nm silica particle and placing it in the near field of a photonic crystal cavity,… ▽ More Quantum control of levitated dielectric particles is an emerging subject in quantum optomechanics. A major challenge is to efficiently measure and manipulate the particle's motion at the Heisenberg uncertainty limit. Here we present a nanophotonic interface suited to address this problem. By optically trapping a 150 nm silica particle and placing it in the near field of a photonic crystal cavity, we achieve tunable single-photon optomechanical coupling of up to $g_0/2π=9$ kHz, three orders of magnitude larger than previously reported for levitated cavity optomechanical systems. Efficient collection and guiding of light through the nanophotonic structure results in a per-photon displacement sensitivity that is increased by two orders of magnitude compared to conventional far-field detection. The demonstrated performance shows a promising route for room temperature quantum optomechanics. △ Less

Submitted 13 January, 2019; v1 submitted 18 April, 2018; originally announced April 2018.

Journal ref: Optica 5, 1597-1602 (2018)

Optical trapping and control of nanoparticles inside evacuated hollow core photonic crystal fibers

Authors: David Grass, Julian Fesel, Sebastian G. Hofer, Nikolai Kiesel, Markus Aspelmeyer

Abstract: We demonstrate an optical conveyor belt for levitated nano-particles over several centimeters inside both air-filled and evacuated hollow-core photonic crystal fibers (HCPCF). Detection of the transmitted light field allows three-dimensional read-out of the particle center-of-mass motion. An additional laser enables axial radiation pressure based feedback cooling over the full fiber length. We sho… ▽ More We demonstrate an optical conveyor belt for levitated nano-particles over several centimeters inside both air-filled and evacuated hollow-core photonic crystal fibers (HCPCF). Detection of the transmitted light field allows three-dimensional read-out of the particle center-of-mass motion. An additional laser enables axial radiation pressure based feedback cooling over the full fiber length. We show that the particle dynamics is a sensitive local probe for characterizing the optical intensity profile inside the fiber as well as the pressure distribution along the fiber axis. In contrast to previous indirect measurement methods we find a linear pressure dependence inside the HCPCF extending over three orders of magnitude from 0.2 mbar to 100 mbar. A targeted application is the controlled delivery of nano-particles from ambient pressure into medium vacuum. △ Less

Submitted 30 March, 2016; originally announced March 2016.

Comments: 8 pages, 7 figures

Cavity cooling of an optically levitated nanoparticle

Authors: Nikolai Kiesel, Florian Blaser, Uros Delic, David Grass, Rainer Kaltenbaek, Markus Aspelmeyer

Abstract: The ability to trap and to manipulate individual atoms is at the heart of current implementations of quantum simulations, quantum computing, and long-distance quantum communication. Controlling the motion of larger particles opens up yet new avenues for quantum science, both for the study of fundamental quantum phenomena in the context of matter wave interference, and for new sensing and transduct… ▽ More The ability to trap and to manipulate individual atoms is at the heart of current implementations of quantum simulations, quantum computing, and long-distance quantum communication. Controlling the motion of larger particles opens up yet new avenues for quantum science, both for the study of fundamental quantum phenomena in the context of matter wave interference, and for new sensing and transduction applications in the context of quantum optomechanics. Specifically, it has been suggested that cavity cooling of a single nanoparticle in high vacuum allows for the generation of quantum states of motion in a room-temperature environment as well as for unprecedented force sensitivity. Here, we take the first steps into this regime. We demonstrate cavity cooling of an optically levitated nanoparticle consisting of approximately 10e9 atoms. The particle is trapped at modest vacuum levels of a few millibar in the standing-wave field of an optical cavity and is cooled through coherent scattering into the modes of the same cavity. We estimate that our cooling rates are sufficient for ground-state cooling, provided that optical trapping at a vacuum level of 10e-7 millibar can be realized in the future, e.g., by employing additional active-feedback schemes to stabilize the optical trap in three dimensions. This paves the way for a new light-matter interface enabling room-temperature quantum experiments with mesoscopic mechanical systems. △ Less

Submitted 1 May, 2013; v1 submitted 24 April, 2013; originally announced April 2013.

Comments: 14 pages, 6 figures

Journal ref: PNAS, vol. 11, no. 35, 14180-14185 (2013)