-
Non-degenerate SPDC photon-pair source for UV-A illumination
Authors:
Preetisha Goswami,
Marta Gilaberte Basset,
Jorge Fuenzalida,
Markus Gräfe,
Valerio Flavio Gili
Abstract:
We present a frequency-correlated non-degenerate photon-pair source consisting of a second-order nonlinear crystal that generates ultraviolet UV-A and infrared light via spontaneous parametric down-conversion. Quantum imaging and sensing techniques like quantum imaging with undetected light and quantum ghost imaging leverage on wavelength correlations between down-converted photon pairs to decoupl…
▽ More
We present a frequency-correlated non-degenerate photon-pair source consisting of a second-order nonlinear crystal that generates ultraviolet UV-A and infrared light via spontaneous parametric down-conversion. Quantum imaging and sensing techniques like quantum imaging with undetected light and quantum ghost imaging leverage on wavelength correlations between down-converted photon pairs to decouple sensing and detection wavelengths, thereby exploiting established camera technology within the visible spectrum. Our results open up novel quantum sensing application scenarios in the ultraviolet domain, with potential implications for advancements in biomedical and non-destructive testing fields.
△ Less
Submitted 19 May, 2025;
originally announced May 2025.
-
Predicting Electromagnetically Induced Transparency based Cold Atomic Engines using Deep Learning
Authors:
Manash Jyoti Sarmah,
Himangshu Prabal Goswami
Abstract:
We develop an artificial neural network model to predict quantum heat engines working within the experimentally realized framework of electromagnetically induced transparency. We specifically focus on Λ-type alkali-based cold atomic systems. This network allows us to analyze all the alkali atom-based engines' performance. High performance engines are predicted and analyzed based on three figures o…
▽ More
We develop an artificial neural network model to predict quantum heat engines working within the experimentally realized framework of electromagnetically induced transparency. We specifically focus on Λ-type alkali-based cold atomic systems. This network allows us to analyze all the alkali atom-based engines' performance. High performance engines are predicted and analyzed based on three figures of merit output, radiation temperature, work and ergotropy. Contrary to traditional notion, the algorithm reveal the limitations of output radiation temperature as a stand alone metric for enhanced engine performance. In high output temperature regime, Cs based engine with a higher output temperature than Rb based engine is characterized by lower work and ergotropy. This is found to be true for different atomic engines with common predicted states in both high and low output temperature regimes. Additionally, the ergotropy is found to exhibit a saturating exponential dependency on the control Rabi frequency.
△ Less
Submitted 6 January, 2025;
originally announced January 2025.
-
Artificial Neural Network based Modelling for Variational Effect on Double Metal Double Gate Negative Capacitance FET
Authors:
Yash Pathak,
Laxman Prasad Goswami,
Bansi Dhar Malhotra,
Rishu Chaujar
Abstract:
In this work, we have implemented an accurate machine-learning approach for predicting various key analog and RF parameters of Negative Capacitance Field-Effect Transistors (NCFETs). Visual TCAD simulator and the Python high-level language were employed for the entire simulation process. However, the computational cost was found to be excessively high. The machine learning approach represents a no…
▽ More
In this work, we have implemented an accurate machine-learning approach for predicting various key analog and RF parameters of Negative Capacitance Field-Effect Transistors (NCFETs). Visual TCAD simulator and the Python high-level language were employed for the entire simulation process. However, the computational cost was found to be excessively high. The machine learning approach represents a novel method for predicting the effects of different sources on NCFETs while also reducing computational costs. The algorithm of an artificial neural network can effectively predict multi-input to single-output relationships and enhance existing techniques. The analog parameters of Double Metal Double Gate Negative Capacitance FETs (D2GNCFETs) are demonstrated across various temperatures ($T$), oxide thicknesses ($T_{ox}$), substrate thicknesses ($T_{sub}$), and ferroelectric thicknesses ($T_{Fe}$). Notably, at $T=300K$, the switching ratio is higher and the leakage current is $84$ times lower compared to $T=500K$. Similarly, at ferroelectric thicknesses $T_{Fe}=4nm$, the switching ratio improves by $5.4$ times compared to $T_{Fe}=8nm$. Furthermore, at substrate thicknesses $T_{sub}=3nm$, switching ratio increases by $81\%$ from $T_{sub}=7nm$. For oxide thicknesses at $T_{ox}=0.8nm$, the ratio increases by $41\%$ compared to $T_{ox}=0.4nm$. The analysis reveals that $T_{Fe}=4nm$, $T=300K$, $T_{ox}=0.8nm$, and $T_{sub}=3nm$ represent the optimal settings for D2GNCFETs, resulting in significantly improved performance. These findings can inform various applications in nanoelectronic devices and integrated circuit (IC) design.
△ Less
Submitted 18 December, 2024;
originally announced December 2024.
-
gSeaGen code by KM3NeT: an efficient tool to propagate muons simulated with CORSIKA
Authors:
S. Aiello,
A. Albert,
A. R. Alhebsi,
M. Alshamsi,
S. Alves Garre,
A. Ambrosone,
F. Ameli,
M. Andre,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
A. Bariego-Quintana,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
M. Bennani,
D. M. Benoit,
E. Berbee
, et al. (238 additional authors not shown)
Abstract:
The KM3NeT Collaboration has tackled a common challenge faced by the astroparticle physics community, namely adapting the experiment-specific simulation software to work with the CORSIKA air shower simulation output. The proposed solution is an extension of the open source code gSeaGen, which allows the transport of muons generated by CORSIKA to a detector of any size at an arbitrary depth. The gS…
▽ More
The KM3NeT Collaboration has tackled a common challenge faced by the astroparticle physics community, namely adapting the experiment-specific simulation software to work with the CORSIKA air shower simulation output. The proposed solution is an extension of the open source code gSeaGen, which allows the transport of muons generated by CORSIKA to a detector of any size at an arbitrary depth. The gSeaGen code was not only extended in terms of functionality but also underwent a thorough redesign of the muon propagation routine, resulting in a more accurate and efficient simulation. This paper presents the capabilities of the new gSeaGen code as well as prospects for further developments.
△ Less
Submitted 29 April, 2025; v1 submitted 31 October, 2024;
originally announced October 2024.
-
Cotunneling assisted nonequilibrium thermodynamics of a photosynthetic junction
Authors:
Debasish Sharma,
Manash Jyoti Sarmah,
Mriganka Sandilya,
Himangshu Prabal Goswami
Abstract:
We theoretically investigate a photosystem II-based reaction center modeled as a nonequilibrium quantum junction. We specifically focus on the electron-electron interactions that enable cotunneling events to be captured through quantum mechanical rates due to the inclusion of a negatively charged manybody state. Using a master equation framework with realistic spectral profiles, we analyze the cot…
▽ More
We theoretically investigate a photosystem II-based reaction center modeled as a nonequilibrium quantum junction. We specifically focus on the electron-electron interactions that enable cotunneling events to be captured through quantum mechanical rates due to the inclusion of a negatively charged manybody state. Using a master equation framework with realistic spectral profiles, we analyze the cotunneling assisted current, power, and work. Amplification of the cotunneling assisted current and power occurs over a narrower bias range, reflecting a trade-off where higher flux is compensated by a reduced work window. We further report that the cotunneling-enhanced thermodynamic variables, particularly within specific bias windows, depends on the interplay between cotunneling amplitudes, electron transition rates, and interaction energy. Both attractive and repulsive electronic interactions can enhance cotunneling, but this effect is sensitive to the energy balance between states and the tunneling strength asymmetries.
△ Less
Submitted 15 October, 2024;
originally announced October 2024.
-
Generation of mega-gauss axial and azimuthal magnetic fields in a solid plasma by ultrahigh intensity, circularly polarised femtosecond laser pulses
Authors:
Anandam Choudhary,
Laxman Prasad Goswami,
C. Aparajit,
Amit D. Lad,
Ameya Parab,
Yash M. Ved,
Amita Das,
G. Ravindra Kumar
Abstract:
The interaction of intense linearly polarized femtosecond laser pulses with solids is known to generate azimuthal magnetic fields, while circularly polarized light has been shown to create axial fields. We demonstrate through experiments and particle-in-cell simulations that circularly polarized light can generate both axial and azimuthal fields of comparable magnitude in a plasma created in a sol…
▽ More
The interaction of intense linearly polarized femtosecond laser pulses with solids is known to generate azimuthal magnetic fields, while circularly polarized light has been shown to create axial fields. We demonstrate through experiments and particle-in-cell simulations that circularly polarized light can generate both axial and azimuthal fields of comparable magnitude in a plasma created in a solid. Angular distributions of the generated fast electrons at target front and rear show significant differences between the results for the two polarization states, with circular polarization enforcing more axial confinement. The measurement of the spatial distribution of both types of magnetic fields captures their turbulent evolution.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production
Authors:
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardacova,
B. Baret,
A. Bariego Quintana,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (259 additional authors not shown)
Abstract:
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl…
▽ More
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Dynamics of Particle-laden Turbulent Suspensions: Effect of particle roughness
Authors:
S. Ghosh,
P S Goswami,
V. Kumaran
Abstract:
The Fluctuating Force Fluctuating Torque (F3T) model is developed and evaluated for the dynamics of a turbulent particle-gas suspension of rough spherical particles in a turbulent Couette flow in the limit where the viscous relaxation time of the particles and the time between collisions are much larger than the integral time for the fluid turbulence. The fluid force/torque exerted on the particle…
▽ More
The Fluctuating Force Fluctuating Torque (F3T) model is developed and evaluated for the dynamics of a turbulent particle-gas suspension of rough spherical particles in a turbulent Couette flow in the limit where the viscous relaxation time of the particles and the time between collisions are much larger than the integral time for the fluid turbulence. The fluid force/torque exerted on the particles comprise a steady part due to the difference in the particle velocity/angular velocity and the fluid mean velocity/rotation rate, and a fluctuating part due to the turbulent velocity/vorticity fluctuations. The fluctuations are modeled as Gaussian white noise whose variance is determined from the fluid velocity and vorticity fluctuations. The smooth and rough inelastic collision models are considered for particle-particle and particle-wall collisions. The results show that inclusion of roughness is important for accurately predicting the particle dynamics; the second moments of the velocity fluctuations for rough particles are higher than those for smooth particles by a factor of 2-10, while the second moments of the angular velocity fluctuations are higher by 1-2 orders of magnitude. The F3T model quantitatively predicts the number density, mean and root mean square velocity and angular velocity profiles, and the distribution functions for the particle velocity and angular velocity, even though a Gaussian model is used for the highly non-Gaussian distributions for the force and torque fluctuations.
△ Less
Submitted 16 November, 2023;
originally announced November 2023.
-
Two dimensional effects of laser interacting with magnetized plasma
Authors:
Laxman Prasad Goswami,
Amita Das,
Anuj Vijay
Abstract:
Recent advancements in low-frequency short-pulse $CO_2$ lasers and the production of strong magnetic fields have made experimental studies on laser interactions with magnetized plasma a near-future possibility. Therefore, theoretical and numerical simulation studies have been pursued lately in this direction [A. Das, Review of Modern Plasma Physics 4, 1 (2020)] illustrating a host of novel phenome…
▽ More
Recent advancements in low-frequency short-pulse $CO_2$ lasers and the production of strong magnetic fields have made experimental studies on laser interactions with magnetized plasma a near-future possibility. Therefore, theoretical and numerical simulation studies have been pursued lately in this direction [A. Das, Review of Modern Plasma Physics 4, 1 (2020)] illustrating a host of novel phenomena related to laser energy absorption [Vashistha et al., New Journal of Physics, 22(6):063023 (2020); Goswami et al., Plasma Physics and Controlled Fusion 63, 115003 (2021)], harmonic generation [Maity et al., Journal of Plasma Physics, 87(5) (2021)], etc. However, most of these studies have been carried out in one-dimensional geometry with the laser having infinite transverse extent, and the plasma target was considered cold. This manuscript explores the manifestation of the 2-D and thermal effects on the problem of a laser interacting with magnetized plasma. As expected, additional transverse ponderomotive force is shown to be operative. A finite temperature of the target, along with transverse density stratification generates, leads to diamagnetic drift for the two plasma species. The imbalance of this drift between the two species can be an additional effect leading to an enhancement of laser energy absorption. The Particle - In - Cell (PIC) simulations with the OSIRIS4.0 platform is used to explore these features.
△ Less
Submitted 21 November, 2023; v1 submitted 27 May, 2023;
originally announced May 2023.
-
Standing waves and jets on a sessile, incompressible bubble
Authors:
Yashika Dhote,
Anil Kumar,
Lohit Kayal,
Partha Sarathi Goswami,
Ratul Dasgupta
Abstract:
We show numerically that large amplitude, \textit{shape deformations}, imposed on a spherical-cap, incompressible, sessile gas bubble pinned on a rigid wall can produce a sharp, wall-directed jet. For such a bubble filled with a permanent gas, the temporal spectrum for surface-tension driven, linearised perturbations has been studied recently in \citet{ding2022oscillations} in the potential flow l…
▽ More
We show numerically that large amplitude, \textit{shape deformations}, imposed on a spherical-cap, incompressible, sessile gas bubble pinned on a rigid wall can produce a sharp, wall-directed jet. For such a bubble filled with a permanent gas, the temporal spectrum for surface-tension driven, linearised perturbations has been studied recently in \citet{ding2022oscillations} in the potential flow limit. We reformulate this as an initial-value problem. Linear theory is validated by distorting the shape of the pinned, spherical cap employing eigenmodes obtained theoretically, as the initial perturbation for our numerical simulations. It is seen that linearised predictions show good agreement with nonlinear simulations at small distortion amplitude producing standing waves. Beyond the linear regime, we observe the formation of a dimple followed by a slender, wall-directed jet analogous to similar jets observed in other geometries from collapsing wave troughs\cite{farsoiya2017axisymmetric,kayal2022dimples}. This jet can eject with an instantaneous velocity exceeding nearly twenty times that predicted by linear theory. By projecting the shape of the bubble surface around the time instant of jet ejection, into the linearised eigenspectrum we show that the jet ejection coincides with the nonlinear spreading of energy into a large number of eigenmodes. We demonstrate that the velocity-field associated with the dimple plays a crucial role in evolving it into a jet and without which, the jet does not form. Our inferences also complement well-known results of \citet{naude1961mechanism} and \citet{plesset1971collapse} demonstrating that wall-directed jets can be generated from \textit{volume preserving}, shape deformation of a pinned bubble.
△ Less
Submitted 17 September, 2023; v1 submitted 23 April, 2023;
originally announced April 2023.
-
Ion heating in Laser interacting with magnetized plasma
Authors:
Rohit Juneja,
Trishul Dhalia,
Laxman Prasad Goswami,
Srimanta Maity,
Devshree Mandal,
Amita Das
Abstract:
The ion heating mechanism in the context of laser interacting with plasma immersed in a strong magnetic field is studied. The magnetic field is chosen to be strong for laser electromagnetic field propagation inside the plasma to be governed by the magnetized dispersion relation. Both X and RL mode configurations have been studied in detail using Particle - In - Cell (PIC) simulations. It is shown…
▽ More
The ion heating mechanism in the context of laser interacting with plasma immersed in a strong magnetic field is studied. The magnetic field is chosen to be strong for laser electromagnetic field propagation inside the plasma to be governed by the magnetized dispersion relation. Both X and RL mode configurations have been studied in detail using Particle - In - Cell (PIC) simulations. It is shown that the energy absorption process is governed by a resonant mechanism wherein the laser frequency matches with an underlying mode in the plasma. For X and RL mode configurations, these correspond to lower hybrid and ion cyclotron resonance, respectively. The absorption, however, is found to be most efficient at frequencies close to but not exactly matching with the resonance frequency. An understanding of the same has been provided. The role of laser polarization has been studied in detail.
△ Less
Submitted 24 February, 2023;
originally announced February 2023.
-
Effect of channel dimensions and Reynolds numbers on the turbulence modulation for particle-laden turbulent channel flows
Authors:
Naveen Rohilla,
Siddhi Arya,
Partha Sarathi Goswami
Abstract:
The addition of particles to turbulent flows changes the underlying mechanism of turbulence and leads to turbulence modulation. Different temporal and spatial scales for both phases make it challenging to understand turbulence modulation via one parameter. The important parameters are particle Stokes number, mass loading, particle Reynolds number, fluid bulk Reynolds number, etc., that act togethe…
▽ More
The addition of particles to turbulent flows changes the underlying mechanism of turbulence and leads to turbulence modulation. Different temporal and spatial scales for both phases make it challenging to understand turbulence modulation via one parameter. The important parameters are particle Stokes number, mass loading, particle Reynolds number, fluid bulk Reynolds number, etc., that act together and affect the fluid phase turbulence intensities. In the present study, we have carried out the large eddy simulations for different system sizes (2δ/dp = 54, 81, and 117) and fluid bulk Reynolds numbers (Re_b = 5600 and 13750) to quantify the extent of turbulence attenuation. Here, δ is the half-channel width, dp is the particle diameter, and Re_b is the fluid Reynolds number based on the fluid bulk velocity and channel width. The point particles are tracked with the Lagrangian approach. The scaling analysis of the feedback force shows that system size and fluid bulk Reynolds number are the two crucial parameters that affect the turbulence modulation more significantly than the other. The streamwise turbulent structures are observed to become lengthier and fewer with an increase in system size for the same volume fraction and fixed bulk Reynolds number. However, the streamwise high-speed streaks are smaller, thinner, and closely spaced for higher Reynolds numbers than the lower ones for the same volume fraction. In particle statistics, it is observed that the scaled particle fluctuations increase with the increase in system size while keeping the Reynolds number fixed. However, the scaled particle fluctuations decrease with the increase in fluid bulk Reynolds number for the same volume fraction and fixed system size. The present study highlights the scaling issue for designing industrial equipment for particle-laden turbulent flows.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Harmonic generation in magnetized plasma for Electromagnetic wave propagating parallel to external magnetic field
Authors:
Trishul Dhalia,
Rohit Juneja,
Laxman Prasad Goswami,
Srimanta Maity,
Amita Das
Abstract:
The harmonic generation has always been of fundamental interest in studying the nonlinear nature of any physical system. In the present study, Particle - In - Cell (PIC) simulations have been carried out to explore the harmonic generation of Electromagnetic waves in a magnetized plasma. The EM wave propagation is chosen to be parallel to the applied external magnetic field. The simulations show th…
▽ More
The harmonic generation has always been of fundamental interest in studying the nonlinear nature of any physical system. In the present study, Particle - In - Cell (PIC) simulations have been carried out to explore the harmonic generation of Electromagnetic waves in a magnetized plasma. The EM wave propagation is chosen to be parallel to the applied external magnetic field. The simulations show the excitation of odd higher harmonics of RCP (Right circularly polarized) and LCP (Left circularly polarized) when the incident wave is linearly polarised. The harmonic generation is maximum when the incident EM wave frequency matches the electron cyclotron frequency. When the incident EM wave has a circular polarization, no harmonics get excited. A theoretical understanding of these observations has also been provided. The studies thus show that by appropriately tailoring of plasma parameters EM waves of higher frequencies and desired nature of circular polarization can be generated.
△ Less
Submitted 22 February, 2023;
originally announced February 2023.
-
Dynamics of particle-laden turbulent Couette flow. Part2: Modified fluctuating force model (M-FFS)
Authors:
Swagnik Ghosh,
Partha Sarathi Goswami
Abstract:
Two-way coupled DNS simulation of particle-laden turbulent Couette-flow [1], in the volume fraction regime $φ>10^{-4}$, showed a discontinuous decrease of turbulence intensity beyond a critical volume fraction $φ_{cr}\sim7.875\times10^{-4}$. Due to the presence of high inertial particles, the drastic reduction of shear production of turbulence is found to be the main cause for the discontinuous at…
▽ More
Two-way coupled DNS simulation of particle-laden turbulent Couette-flow [1], in the volume fraction regime $φ>10^{-4}$, showed a discontinuous decrease of turbulence intensity beyond a critical volume fraction $φ_{cr}\sim7.875\times10^{-4}$. Due to the presence of high inertial particles, the drastic reduction of shear production of turbulence is found to be the main cause for the discontinuous attenuation of turbulence. In this article, particle-phase statistics is explored. The two-way coupled DNS reveal that the mean-square velocity profiles in cross-stream (y) and span-wise (z) directions are flat and increase with $φ$ as the higher frequency of collision helps in transferring streamwise momentum to span-wise and wall-normal directions. Whereas, streamwise fluctuations decrease and tend become flatter with increase in loading. In the regime with $φ>φ_{cr}$, the particle velocity fluctuations drive the fluid phase velocity fluctuations. Additionally it is observed that one-way coupled DNS and Fluctuating Force Simulation (FFS) [2] are capable to predict the particle phase statistics with reasonable accuracy in the regime $φ<φ_{cr}$ where wall-particle collision time and inter-particle collision time is lesser than viscous relaxation time of the particles. For, $φ>φ_{cr}$, a significant error in the prediction from one-way coupled DNS and FFS is observed due to the limitation of FFS in capturing the turbulence attenuation and the change in mean fluid velocity profile. A modified FFS model (M-FFS) is successfully developed in this article with modified mean fluid velocity profile and zero-diffusivity.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
Dynamics of particle-laden turbulent Couette flow. Part1: Turbulence modulation by inertial particles
Authors:
Swagnik Ghosh,
Partha Sarathi Goswami
Abstract:
In particle-laden turbulent flows the turbulence in carrier fluid phase gets affected by the dispersed particle phase for volume fraction above $10^{-4}$ and hence reverse coupling or two-way coupling becomes relevant in that volume fraction regime. In a recent study by Muramulla $et.al.^1$, a discontinuous decrease of turbulence intensity is observed in a vertical particle-laden turbulent channel…
▽ More
In particle-laden turbulent flows the turbulence in carrier fluid phase gets affected by the dispersed particle phase for volume fraction above $10^{-4}$ and hence reverse coupling or two-way coupling becomes relevant in that volume fraction regime. In a recent study by Muramulla $et.al.^1$, a discontinuous decrease of turbulence intensity is observed in a vertical particle-laden turbulent channel-flow for a critical volume fraction O($10^{-3}$). The collapse of turbulent intensity is found out to be a result of catastrophic reduction of turbulent energy production rate. Mechanistically, particle-fluid coupling in particle-laden turbulent Couette-flow differs from that in a closed channel flow. In this article, the turbulence modulation in Couette-flow by inertial particles is explored through two-way coupled DNS where particle volume fraction ($φ$) is varied from $1.75\times10^{-4}$ to $1.05\times10^{-3}$ and Reynolds Number based on half-channel width ($δ$) and wall velocity ($U$) ($Re_δ$) is $750$. The particles are heavy point particles with $St\sim367$ based on fluid integral time-scale represented by $δ/U$. A discontinuous decrease of fluid turbulence intensity, mean square velocity and Reynolds stress is observed beyond a critical volume fraction $φ_{cr}\sim7.875\times10^{-4}$. The drastic reduction of shear production of turbulence and in turn the reduction of viscous dissipation of turbulent kinetic energy are two important phenomena for the occurrence of discontinuous transition similar to channelflow. The step-wise particle injection and step-wise removal study confirms that it is the presence of particles which is majorly behind this discontinuous transition.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
Assessment of local isotropy, Kolmogorov constant, and modified eddy viscosity-based modeling for particle-laden turbulent channel flows
Authors:
Naveen Rohilla,
Partha S Goswami
Abstract:
A large number of models which address the dynamics of particle-laden turbulent flows have been developed based on the assumption of local isotropy and use the Kolmogorov constant that correlates the spectral distribution of turbulent kinetic energy with the turbulent dissipation rate. Many turbulence models (Stochastic and LES models) use the Kolmogorov constant in the formulation. Compilation of…
▽ More
A large number of models which address the dynamics of particle-laden turbulent flows have been developed based on the assumption of local isotropy and use the Kolmogorov constant that correlates the spectral distribution of turbulent kinetic energy with the turbulent dissipation rate. Many turbulence models (Stochastic and LES models) use the Kolmogorov constant in the formulation. Compilation of a large number of experimental data for different flow configurations has revealed that the Kolmogorov constant is independent of Reynolds number in the limit of high Reynolds number (Sreenivasan, 1995). However, several numerical studies at low and intermediate Reynolds numbers which address the flow situations of practical importance consider that the Kolmogorov constant remains unchanged irrespective of whether the flow is single phase or multiphase. In the present work, we assess the variation of local isotropy of fluid fluctuations with the increase in particle loading in particle-laden turbulent channel flows. We also estimate the Kolmogorov constant using second-order velocity structure functions and compensated spectra in case of low Reynolds number turbulent flows. Our study reveals that the Kolmogorov constant decreases in the channel center with an increase in the particle volume fraction for the range of Reynolds number investigated here. The estimated variation of the Kolmogorov constant is used to express the Smagorinsky coefficient as a function of solid loading in particle-laden flows. Then, a new modeling technique is adopted using the large eddy simulation (LES) to predict the fluid phase statistics without solving simultaneous particle phase equations. This new methodology also helps understand the drastic decrease in turbulence intensity at critical particle volume loading.
△ Less
Submitted 25 October, 2022; v1 submitted 31 March, 2022;
originally announced March 2022.
-
Particle-In-Cell observations of Brillouin scattering for laser interacting with magnetized overdense plasma
Authors:
Laxman Prasad Goswami,
Rohit Juneja,
Dhalia Trishul,
Srimanta Maity,
Sathi Das,
Amita Das
Abstract:
One dimensional Particle-in-cell simulations using OSIRIS-4.0 has been conducted to study the interaction of a laser electromagnetic pulse with an overdense magnetized plasma target. The external magnetic field has been chosen to be directed along the laser propagation direction. This geometry supports the propagation of right (R) and left (L) circularly polarised electromagnetic waves in the plas…
▽ More
One dimensional Particle-in-cell simulations using OSIRIS-4.0 has been conducted to study the interaction of a laser electromagnetic pulse with an overdense magnetized plasma target. The external magnetic field has been chosen to be directed along the laser propagation direction. This geometry supports the propagation of right (R) and left (L) circularly polarised electromagnetic waves in the plasma. The laser pulse is allowed to propagate inside the plasma when its frequency falls in the pass band of the dispersion curves of L and/or R waves. The strength of the applied external magnetic field is chosen as a parameter to ensure that the laser frequency lies in the appropriate pass band. It is demonstrated that for all possible polarization of the incident laser, parametric process involving a scattered Electromagnetic wave and an electrostatic mode occur. The parametric process has been identified as that due to the Brillouin back scattering process.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
Effect of rough wall on drag, lift, and torque on an ellipsoidal particle in a linear shear flow
Authors:
Atul Manikrao Bhagat,
Partha Sarathi Goswami
Abstract:
The present study provides a detailed description of the forces on an ellipsoidal particle in the vicinity of the rough wall. Three-dimensional numerical simulations are performed using body-fitted mesh to estimate the drag, lift, and torque coefficients. A large number of simulations are conducted %(approximately 2400) over a range of parameters such as shear Reynolds number (…
▽ More
The present study provides a detailed description of the forces on an ellipsoidal particle in the vicinity of the rough wall. Three-dimensional numerical simulations are performed using body-fitted mesh to estimate the drag, lift, and torque coefficients. A large number of simulations are conducted %(approximately 2400) over a range of parameters such as shear Reynolds number ($10 \le Re_s \le 100$), orientation angle ($0\leθ\le 180$), and wall-particle separation distance ($0.1\leδ\le2.0$) to get a comprehensive description of variation of the above coefficients. Using the simulation results, we develop the correlations for the drag and lift coefficients to describe the effect of rough wall, inclination angles, and particle Reynolds numbers on the hydrodynamic coefficients. The proposed correlations can be used for two phase flow simulation using Eulerian-Lagrangian framework.
△ Less
Submitted 22 January, 2022;
originally announced January 2022.
-
Mode conversion and laser energy absorption by plasma under an inhomogeneous external magnetic field
Authors:
Srimanta Maity,
Laxman Prasad Goswami,
Ayushi Vashistha,
Devshree Mandal,
Amita Das
Abstract:
The interaction of a high-frequency laser with plasma in the presence of an inhomogeneous external magnetic field has been studied here with the help of Particle-In-Cell simulation. It has been shown that laser enters inside the plasma as an extraordinary wave (X-wave), where the electric field of the wave oscillates perpendicular to both external magnetic field and propagation direction, and as i…
▽ More
The interaction of a high-frequency laser with plasma in the presence of an inhomogeneous external magnetic field has been studied here with the help of Particle-In-Cell simulation. It has been shown that laser enters inside the plasma as an extraordinary wave (X-wave), where the electric field of the wave oscillates perpendicular to both external magnetic field and propagation direction, and as it travels through the plasma, its dispersion property changes due to the inhomogeneity of the externally applied magnetic field. Our study shows that the X-wave's electromagnetic energy is converted to an electrostatic mode as it encounters the upper-hybrid (UH) resonance layer. In the later stage of the evolution, this electrostatic wave breaks and converts its energy to electron kinetic energy. Our study reveals two additional processes involved in decaying electrostatic mode at the UH resonance layer. We have shown that the energy of the electrostatic mode also converts to a low-frequency lower-hybrid mode and high-frequency electromagnetic harmonic radiations at the resonance layer. The dependence of energy conversion processes on the gradient of external magnetic field has also been studied and analyzed.
△ Less
Submitted 13 January, 2022;
originally announced January 2022.
-
A Statistical Analysis Towards Modelling the Fluctuating Torque on Particles in Particle-laden Turbulent Shear Flow
Authors:
Swagnik Ghosh,
Partha Sarathi Goswami
Abstract:
Dynamics of the particle phase in a particle laden turbulent flow is highly influenced by the fluctuating velocity and vorticity field of the fluid phase. The present work mainly focuses on exploring the possibility of applying a Langevin type of random torque model to predict the rotational dynamics of the particle phase. Towards this objective, direct numerical simulations (DNS) have been carrie…
▽ More
Dynamics of the particle phase in a particle laden turbulent flow is highly influenced by the fluctuating velocity and vorticity field of the fluid phase. The present work mainly focuses on exploring the possibility of applying a Langevin type of random torque model to predict the rotational dynamics of the particle phase. Towards this objective, direct numerical simulations (DNS) have been carried out for particle laden turbulent shear flow with Reynolds number, $Re_δ=750$ in presence of sub-Kolmogorov sized inertial particles (Stokes number >>1). The inter-particle and wall-particle interactions have also been considered to be elastic. From the particle equation of rotational motion, we arrive at the expression where the fluctuating angular acceleration fluctuation $α'_i$ of the particle is expressed as the ratio of a linear combination of fluctuating rotational velocities of particle $ω'_i$ and fluid angular velocity $Ω'_i$ to the particle rotational relaxation time $τ_r$. The analysis was done using p.d.f plots and Jensen-Shannon Divergence based method to assess the similarity of the particle net rotational acceleration distribution $f(α'_i)$, with (i) the distributions of particle acceleration component arising from fluctuating fluid angular velocity computed in the particle-Largrangian frame $f(Ω'_i/τ_r)_{pl}$, (ii) fluctuating particle angular velocity $f(ω'_i/τ_r)_{pl}$, and (iii) the fluid angular velocity $(Ω'_i/τ_r)_{e}$, computed in the fluid Eulerian grids. The analysis leads to the conclusion that $f(α'_i)$ can be modeled with a Gaussian white noise using a pre-estimated strength which can be calculated from the temporal correlation of $(Ω'_i/τ_r)_{e}$.
△ Less
Submitted 5 June, 2021;
originally announced June 2021.
-
Ponderomotive force driven mechanism for electrostatic wave excitation and energy absorption of Electromagnetic waves in overdense magnetized plasma
Authors:
Laxman Prasad Goswami,
Srimanta Maity,
Devshree Mandal,
Ayushi Vashistha,
Amita Das
Abstract:
The excitation of electrostatic waves in plasma by laser electromagnetic pulse is important as it provides a scheme by which the power from the laser electromagnetic (EM) field can be transferred into the plasma medium. The paper presents a fundamentally new ponderomotive pressure-driven mechanism of excitation of electrostatic waves in an overdense magnetized plasma by a finite laser pulse. Parti…
▽ More
The excitation of electrostatic waves in plasma by laser electromagnetic pulse is important as it provides a scheme by which the power from the laser electromagnetic (EM) field can be transferred into the plasma medium. The paper presents a fundamentally new ponderomotive pressure-driven mechanism of excitation of electrostatic waves in an overdense magnetized plasma by a finite laser pulse. Particle-in-cell (PIC) simulations using the EPOCH-4.17.10 framework have been utilized for the study of a finite laser pulse interacting with a magnetized overdense plasma medium. The external magnetic field is chosen to be aligned parallel to the laser propagation direction. In this geometry, the electromagnetic wave propagation inside the plasma is identified as whistler or R and L waves. The group velocity of these waves being different, a clear spatial separation of the R and L pulses are visible. In addition, excitation of electrostatic perturbation associated with the EM pulses propagating inside the plasma is also observed. These electrostatic perturbations are important as they couple laser energy to the plasma medium. The excitation of electrostatic oscillations are understood here by a fundamentally new mechanism of charge separation created by the difference between the ponderomotive force (of the electromagnetic pulse) felt by the two plasma species, viz., the electrons and the ions in a magnetized plasma.
△ Less
Submitted 25 May, 2021; v1 submitted 19 April, 2021;
originally announced April 2021.
-
Harmonic generation in the interaction of laser with a magnetized overdense plasma
Authors:
Srimanta Maity,
Devshree Mandal,
Ayushi Vashistha,
Laxman Prasad Goswami,
Amita Das
Abstract:
The mechanism of harmonic generation in both O and X-mode configurations for a magnetized plasma has been explored here in detail with the help of Particle-In-Cell (PIC) simulations. A detailed characterization of both the reflected and transmitted electromagnetic radiation propagating in the bulk of the plasma has been carried out for this purpose. The efficiency of harmonic generation is shown t…
▽ More
The mechanism of harmonic generation in both O and X-mode configurations for a magnetized plasma has been explored here in detail with the help of Particle-In-Cell (PIC) simulations. A detailed characterization of both the reflected and transmitted electromagnetic radiation propagating in the bulk of the plasma has been carried out for this purpose. The efficiency of harmonic generation is shown to increase with the incident laser intensity. Dependency of harmonic efficiency has also been found on magnetic field strength. This work demonstrates that there is an optimum value of the magnetic field at which the efficiency of harmonic generation maximizes. The observations are in agreement with theoretical analysis. For O-mode configuration, this is compelling as the harmonic generation provides for a mechanism by which laser energy can propagate inside an overdense plasma region.
△ Less
Submitted 20 September, 2021; v1 submitted 5 February, 2021;
originally announced February 2021.
-
Two-dimensional spectroscopy of Rydberg gases
Authors:
Kaustav Mukherjee,
Himangshu Prabal Goswami,
Shannon Whitlock,
Sebastian Wüster,
Alexander Eisfeld
Abstract:
Two-dimensional (2D) spectroscopy uses multiple electromagnetic pulses to infer the properties of a complex system. A paradigmatic class of target systems are molecular aggregates, for which one can obtain information on the eigenstates, various types of static and dynamic disorder and on relaxation processes. However, two-dimensional spectra can be difficult to interpret without precise knowledge…
▽ More
Two-dimensional (2D) spectroscopy uses multiple electromagnetic pulses to infer the properties of a complex system. A paradigmatic class of target systems are molecular aggregates, for which one can obtain information on the eigenstates, various types of static and dynamic disorder and on relaxation processes. However, two-dimensional spectra can be difficult to interpret without precise knowledge of how the signal components relate to microscopic Hamiltonian parameters and system-bath interactions. Here we show that two-dimensional spectroscopy can be mapped in the microwave domain to highly controllable Rydberg quantum simulators. By porting 2D spectroscopy to Rydberg atoms, we firstly open the possibility of its experimental quantum simulation, in a case where parameters and interactions are very well known. Secondly, the technique may provide additional handles for experimental access to coherences between system states and the ability to discriminate different types of decoherence mechanisms in Rydberg gases. We investigate the requirements for a specific implementation utilizing multiple phase coherent microwave pulses and a phase cycling technique to isolate signal components.
△ Less
Submitted 29 December, 2020; v1 submitted 28 March, 2020;
originally announced March 2020.
-
Interdigitated flexible supercapacitor using activated carbon synthesized from biomass for wearable energy storage
Authors:
Ankit Singh,
Kaushik Ghosh,
Sushil Kumar,
Ashwini K. Agarwal,
Manjeet Jassal,
Pranab Goswami,
Harsh Chaturvedi
Abstract:
We have developed a flexible, interdigitated supercapacitor with high energy storing capacity for wearable, flexible electronic application. Locally obtained low cost biomass (banana peel) was impregnated with KOH under high temperature under an inert atmosphere to synthesize activated carbon with significant Brunauer Emmett Teller surface area of 62.03m2/g. The supercapacitor was fabricated by sc…
▽ More
We have developed a flexible, interdigitated supercapacitor with high energy storing capacity for wearable, flexible electronic application. Locally obtained low cost biomass (banana peel) was impregnated with KOH under high temperature under an inert atmosphere to synthesize activated carbon with significant Brunauer Emmett Teller surface area of 62.03m2/g. The supercapacitor was fabricated by screen printing interdigitated current collector of conducting silver ink on a thin flexible PET substrate and subsequent deposition of activated carbon and drop casting of gel electrolyte. Fabricated supercapacitor exhibits high capacitance of 33.18 mF/cm2 at 1mV/s scan rate and 20.12 mF/cm2 at a discharge current of 1mA and high energy density of 5.87 micro Wh/cm2. The developed flexible supercapacitor retains its energy storing capacity (90%) over several cycles of mechanical bending and repetitive electronic cycling tests (5000 cycles). Locally available biomass based activated carbon and low cost screen printing technique can be used for large scale fabrication of supercapacitor. The flexible supercapacitor demonstrates high energy storing capacity and mechanical durability through multiple bending and charging and discharging through LED. Therefore, it can be used for further developing integrated wearable and printed electronic devices.
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
Turbulence collapses at a threshold particle loading in a dilute particle-gas suspension
Authors:
V. Kumaran,
P Muramalla,
A. Tyagi,
P. S. Goswami
Abstract:
Two mechanisms are considered responsible for the turbulence modification due to suspended particles in a turbulent gas-particle suspension. Turbulence augmentation is due to the enhancement of fluctuations by wakes behind particles, whereas turbulence attenuation is considered to result from the increased dissipation due to the particle drag. In order to examine the turbulence attenuation mechani…
▽ More
Two mechanisms are considered responsible for the turbulence modification due to suspended particles in a turbulent gas-particle suspension. Turbulence augmentation is due to the enhancement of fluctuations by wakes behind particles, whereas turbulence attenuation is considered to result from the increased dissipation due to the particle drag. In order to examine the turbulence attenuation mechanism, Direct Numerical Simulations (DNS) of a particle-gas suspension are carried out at a Reynolds number of about 3333 based on the average gas velocity $\bar{u}$, channel width $h$, and the gas kinematic viscosity. The particle Reynolds number based on the particle diameter $d_p$, gas kinematic viscosity and the flow velocity $\bar{u}$ is about 42 and the Stokes number is in the range $7-450$. The particle volume fraction is in the range $0-2 \times 10^{-3}$, and the particle mass loading is in the range $0-9$. As the volume fraction is increased, a discontinuous decrease in the turbulent velocity fluctuations is observed at a critical volume fraction. from $9 \times 10^{-4}$ to $1 \times 10^{-3}$. There is a reduction, by one order of magnitude, in the mean square fluctuating velocities in all directions and in the Reynolds stress. Though there is a modest increase in the energy dissipation due to particle drag, this increase is smaller than the decrease in the turbulent energy production; moreover, there is a decrease in the total energy dissipation rate when there is turbulence collapse. Thus, turbulence attenuation appears to be due to a disruption of the turbulence production mechanism, and not due to the increased dissipation due to the particles. There is a discontinuous collapse in the turbulence intensities at a critical particle loading, instead of the continuous decrease as the particle loading is increased.
△ Less
Submitted 16 November, 2018;
originally announced November 2018.
-
Optical cooling of interacting atoms in a tightly confined trap
Authors:
Somnath Naskar,
Subrata Saha,
Partha Goswami,
Arpita pal,
Bimalendu Deb
Abstract:
In a recent paper, we have proposed a novel laser cooling scheme for reducing collisional energy of a pair of atoms by using photoassociative transitions. In that paper, we considered two atoms in free space, that is we have not considered the effects of trap on the cooling process. Here in this paper, we qualitatively discuss the possibility of extending this idea for Raman sideband cooling of a…
▽ More
In a recent paper, we have proposed a novel laser cooling scheme for reducing collisional energy of a pair of atoms by using photoassociative transitions. In that paper, we considered two atoms in free space, that is we have not considered the effects of trap on the cooling process. Here in this paper, we qualitatively discuss the possibility of extending this idea for Raman sideband cooling of a pair of interacting atoms trapped in Lamb-Dicke (LD) regime. Apart from cooling, our method may be important for manipulating on-site interaction of atoms in an optical lattice.
△ Less
Submitted 21 March, 2017;
originally announced March 2017.
-
Oscillations in a flexible channel flow of a generalized Newtonian fluid
Authors:
Prakash Goswami,
Aditya Bandopadhyay,
Suman Chakraborty
Abstract:
We study the flow of a generalized Newtonian fluid, characterized by a power-law model, through a channel consisting of a wall with a flexible membrane under longitudinal tension. It is assumed that at steady state the flow through the channel admits a constant flux unidirectional flow profile, while for the unsteady case, we employ the long wave approximation and use a set of reduced equations to…
▽ More
We study the flow of a generalized Newtonian fluid, characterized by a power-law model, through a channel consisting of a wall with a flexible membrane under longitudinal tension. It is assumed that at steady state the flow through the channel admits a constant flux unidirectional flow profile, while for the unsteady case, we employ the long wave approximation and use a set of reduced equations to describe the variation of the shape of the membrane (assumed to be massless and elastic) and the variation of the fluid-flux. By means of asymptotic expansion, multiscale analysis and full numerical solutions of the pertinent governing equations, we show that depending upon the Reynolds number and the membrane stress, the flow behaviour for a shear-thinning, shear-thickening and Newtonian fluid may be markedly different, being oscillatory for one while chaotic for the other. The results presented herein hold practical relevance for several biologically relevant processes involving transport of rheologically complex biofluids through flexible domains.
△ Less
Submitted 22 September, 2016;
originally announced September 2016.
-
A model study on a pair of trapped particles interacting with an arbitrary effective range
Authors:
Partha Goswami,
Bimalendu Deb
Abstract:
We study the effects of the effective range of interaction on the eigenvalues and eigenstates of two particles confined in a three-dimensional (3D) isotropic as well as one- or quasi-one dimensional harmonic (1D) traps. For this we employ model potentials which mimic finite-range s-wave interactions over a wide range of s-wave scattering length $a_s$ including the unitarity limits…
▽ More
We study the effects of the effective range of interaction on the eigenvalues and eigenstates of two particles confined in a three-dimensional (3D) isotropic as well as one- or quasi-one dimensional harmonic (1D) traps. For this we employ model potentials which mimic finite-range s-wave interactions over a wide range of s-wave scattering length $a_s$ including the unitarity limits $a_s \rightarrow \pm\infty$. Our results show that when the range is larger than the 3D or 1D harmonic oscillator length scale, the eigenvalues and eigenstates are nearly similar to those of noninteracting two particles in the 3D or 1D trap, respectively. In case of 3D, we find that when the range goes to zero, the results of contact potential as derived by Busch {\it et al.} [Foundations of Physics, {\bf28}, 549 (1998)] are reproduced. However, in the case of 1D, such reproducibility does not occur as the range goes to zero. We have calculated the eigenvalues and eigenstates in 1D harmonic trap taking one-dimensional finite- range model potential. We have also calculated bound state properties of two particles confined in a highly anisotropic quasi-1D trap taking three-dimensional finite-range model potential, and examined whether these quasi-1D results approach towards 1D ones as the aspect ratio $η$ of the radial to axial frequency of the trap increases. We find that if the range is very small compared to the axial size of the trap, then one can reach 1D regime for $η\ge 10000$. However, for large range, one can nearly get 1D results for smaller values of $η$. This study will be important for exploration of two-body or many body physics of trapped ultracold atoms interacting with narrow Feshbach resonance for which the effective range can be large.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
An investigation into the nano-/micro-architecture of electrospun poly (ε-caprolactone) and self-assembling peptide fibers
Authors:
Robabeh Gharaei,
Giuseppe Tronci,
Robert P. Davies,
Parikshit Goswami,
Stephen J. Russell
Abstract:
Self-assembling peptides (SAPs) have the ability to spontaneously assemble into ordered nanostructures enabling the manufacture of "designer" nanomaterials. The reversible molecular association of SAPs has been shown to offer great promise in therapeutics via for example, the design of biomimetic assemblies for hard tissue regeneration. This could be further exploited for novel nano/micro diagnost…
▽ More
Self-assembling peptides (SAPs) have the ability to spontaneously assemble into ordered nanostructures enabling the manufacture of "designer" nanomaterials. The reversible molecular association of SAPs has been shown to offer great promise in therapeutics via for example, the design of biomimetic assemblies for hard tissue regeneration. This could be further exploited for novel nano/micro diagnostic tools. However, self-assembled peptide gels are often associated with inherent weak and transient mechanical properties. Their incorporation into polymeric matrices has been considered as a potential strategy to enhance their mechanical stability. This study focuses on the incorporation of an 11-residue peptide, P11-8 (peptide sequence: CH3CO-Gln-Gln-Arg-Phe-Orn-Trp-Orn-Phe-Glu-Gln-Gln-NH2) within a fibrous scaffold of poly (ε-caprolactone) (PCL). In this study an electrospinning technique was used to fabricate a biomimetic porous scaffold out of a solution of P11-8 and PCL which resulted in a biphasic structure composed of submicron fibers (diameter of 100-700 nm) and nanofibers (diameter of 10-100 nm). The internal morphology of the fabric and its micro-structure can be easily controlled by changing the peptide concentration. The secondary conformation of P11-8 was investigated in the as-spun fibers by ATR-FTIR spectroscopy and it is shown that peptide self-assembly into \{b}eta-sheet tapes has taken place during fiber formation and the deposition of the fibrous web.
△ Less
Submitted 12 January, 2016;
originally announced January 2016.
-
Investigation into the potential use of Poly (vinyl alcohol)/Methylglyoxal fibres as antibacterial wound dressing components
Authors:
Sophie E. L. Bulman,
Parikshit Goswami,
Giuseppe Tronci,
Stephen J. Russell,
Chris Carr
Abstract:
As problems of antibiotic resistance increase, a continuing need for effective bioactive wound dressings is anticipated for the treatment of infected chronic wounds. Naturally derived antibacterial agents, such as Manuka honey, consist of a mixture of compounds, more than one of which can influence antimicrobial potency. The non-peroxide bacteriostatic properties of Manuka honey have been previous…
▽ More
As problems of antibiotic resistance increase, a continuing need for effective bioactive wound dressings is anticipated for the treatment of infected chronic wounds. Naturally derived antibacterial agents, such as Manuka honey, consist of a mixture of compounds, more than one of which can influence antimicrobial potency. The non-peroxide bacteriostatic properties of Manuka honey have been previously linked to the presence of methylglyoxal (MGO). The incorporation of MGO as a functional antibacterial additive during fibre production was explored as a potential route for manufacturing wound dressing components. Synthetic MGO and polyvinyl alcohol (PVA) were fabricated into webs of sub-micron fibres by means of electrostatic spinning of an aqueous spinning solution. Composite fabrics were also produced by direct deposition of the PVA-MGO fibres onto a preformed spunbonded nonwoven substrate. Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) and Proton Nuclear Magnetic Resonance (<p><sup>1</sup>H-NMR) spectroscopies confirmed the presence of MGO within the resulting fibre structure. The antibacterial activity of the fibres was studied using strains of Staphylococcus aureus and Escherichia coli. Strong antibacterial activity, as well as diffusion of MGO from the fibres was observed at a concentration of 1.55mg/<p>cm<sup>-1</sup>.
△ Less
Submitted 16 July, 2015;
originally announced July 2015.
-
A model study on atom-atom interactions with large scattering length in quasi-two dimensional traps
Authors:
Partha Goswami,
Arpita Rakshit,
Bimalendu Deb
Abstract:
We carry out a model study on two-atom interactions and bound states in quasi-two dimensional traps. The interactions are modeled by two-parameter potentials with parameters being the range $r_0$ and the $s$-wave scattering length $a_s$. We show that one can make use of two forms of finite-range model potentials, one for $a_s > 0$ and the other for $a_s < 0$. Both potentials reduce to same form in…
▽ More
We carry out a model study on two-atom interactions and bound states in quasi-two dimensional traps. The interactions are modeled by two-parameter potentials with parameters being the range $r_0$ and the $s$-wave scattering length $a_s$. We show that one can make use of two forms of finite-range model potentials, one for $a_s > 0$ and the other for $a_s < 0$. Both potentials reduce to same form in the limits $a_s \rightarrow \pm \infty $. We investigate into the dependence of the binding energies and the wave functions of two-atom trap-bound states on $a_s$ and $r_0$. In particular, we study the effects of $a_s$ ranging from large negative to large positive values on the bound state properties. Our results show that long-range interactions with infinite scattering length significantly alter the ground-state energy of the two atoms in a quasi-two or two dimensional trap. In contrast, short-range interactions can not significantly change the ground-state energy of two atoms in a 2D harmonic trap.
△ Less
Submitted 9 April, 2015; v1 submitted 15 November, 2013;
originally announced November 2013.
-
A Landau fluid model for warm collisionless plasmas
Authors:
P. Goswami,
T. Passot,
P. L. Sulem
Abstract:
A Landau fluid model for a collisionless electron-proton magnetized plasma, that accurately reproduces the dispersion relation and the Landau damping rate of all the magnetohydrodynamic waves, is presented. It is obtained by an accurate closure of the hydrodynamic hierarchy at the level of the fourth order moments, based on linear kinetic theory. It retains non-gyrotropic corrections to the pres…
▽ More
A Landau fluid model for a collisionless electron-proton magnetized plasma, that accurately reproduces the dispersion relation and the Landau damping rate of all the magnetohydrodynamic waves, is presented. It is obtained by an accurate closure of the hydrodynamic hierarchy at the level of the fourth order moments, based on linear kinetic theory. It retains non-gyrotropic corrections to the pressure and heat flux tensors up to the second order in the ratio between the considered frequencies and the ion cyclotron frequency.
△ Less
Submitted 13 September, 2005;
originally announced September 2005.
