-
Ignition criteria and the effect of boundary layers on wedge-stabilized oblique detonation waves
Authors:
Christian L. Bachman,
Gabriel B. Goodwin
Abstract:
Simulations of a supersonic, premixed, reacting flow over a wedge were performed to investigate the effect of a boundary layer on the wedge surface on ignition and stability of oblique detonation waves (ODWs). Two computational domains were used: one containing a wedge of a single angle with a straight after-body, and the other containing a double-angle wedge geometry. Both domains were channels w…
▽ More
Simulations of a supersonic, premixed, reacting flow over a wedge were performed to investigate the effect of a boundary layer on the wedge surface on ignition and stability of oblique detonation waves (ODWs). Two computational domains were used: one containing a wedge of a single angle with a straight after-body, and the other containing a double-angle wedge geometry. Both domains were channels with a supersonic inflow of stoichiometric hydrogen-air and a nonreflecting outflow, and the wedge was modeled using an immersed boundary method. The compressible reactive Navier-Stokes equations were solved using a high-order numerical algorithm on an adapting grid. Inviscid and viscous wedge surfaces were modeled using slip and no-slip adiabatic boundary conditions, respectively. Inviscid wedge surface cases are presented for a range of inflow conditions and compared to previous work outlining several different ODW structures. An ignition criterion is established as an accurate method of predicting the formation of an ODW for a given inflow temperature, Mach number, wedge angle, and length of the inviscid wedge surface. A viscous wedge surface is then considered for a Mach 5 inflow at temperatures of 600 K, 700 K, and 800 K. The 600 K flow ignites in the boundary layer, but does not detonate, while the 700 K and 800 K flows ignite and form ODWs. It was determined that ODW formation depends on the degree of augmentation of the leading oblique shock wave by the burning boundary layer and that ODW formation is therefore predictable based on the ignition criterion. The 700 K flow produces a unique oscillatory mode of a receding ODW followed by a redetonation event occurring near the leading edge. A mechanism for this cycle, which repeats indefinitely, is proposed.
△ Less
Submitted 27 May, 2020;
originally announced May 2020.
-
Effect of Inflow Turbulence on Premixed Combustion in a Cavity Flameholder
Authors:
Gabriel B. Goodwin,
Ryan F. Johnson,
David A. Kessler,
Andrew D. Kercher,
Harsha K. Chelliah
Abstract:
A discontinuous Galerkin finite element method code, JENRE, was used to perform highly resolved simulations of ramjet-mode combustion in the University of Virginia Supersonic Combustion Facility cavity flameholder at a flight enthalpy of Mach 5. Prior experiments measured a freestream turbulence intensity at the inflow to the cavity ranging from 10 - 15%. A synthetic turbulence inflow generator wa…
▽ More
A discontinuous Galerkin finite element method code, JENRE, was used to perform highly resolved simulations of ramjet-mode combustion in the University of Virginia Supersonic Combustion Facility cavity flameholder at a flight enthalpy of Mach 5. Prior experiments measured a freestream turbulence intensity at the inflow to the cavity ranging from 10 - 15%. A synthetic turbulence inflow generator was implemented for the simulations in this work to reproduce the turbulence at the inflow to the cavity. Velocity perturbations and turbulence intensity generated by the turbulent inflow boundary condition are shown to match those values measured in the facility using particle induced velocimetry. Simulations were performed both with and without inflow turbulence to study the effect of turbulence on flame stability and structure. In both cases, a cavity-stabilized flame was achieved. The inflow turbulence promoted more robust combustion, causing the flame to propagate further from the cavity into the core flow, broadening the flame angle with respect to the axial flow direction. The flame angle captured in the simulation agrees with experimental results and theoretical prediction. The cavity's vortex shedding frequency was identified. Flame strain rate and pressure fluctuations in the cavity shear layer were also measured and found to vary periodically at a frequency equal to that of the vortex shedding. High flow strain rate in the cavity shear layer, driven by the vortex shedding process, is identified as a cause of flame stretching and low OH concentrations as the flame traverses the cavity ramp. The effect of spatial resolution on the simulations is discussed through a comparison of cases using second-order and third-order accurate discontinuous Galerkin finite elements.
△ Less
Submitted 27 October, 2020; v1 submitted 16 January, 2020;
originally announced January 2020.
-
Flame Instability and Transition to Detonation in Supersonic Reactive Flows
Authors:
Gabriel B. Goodwin,
Elaine S. Oran
Abstract:
Multidimensional numerical simulations of a homogeneous, chemically reactive gas were used to study ignition, flame stability, and deflagration-to-detonation transition (DDT) in a supersonic combustor. The configuration studied was a rectangular channel with a supersonic inflow of stoichiometric ethylene-oxygen and a transimissive outflow boundary. The calculation is initialized with a velocity in…
▽ More
Multidimensional numerical simulations of a homogeneous, chemically reactive gas were used to study ignition, flame stability, and deflagration-to-detonation transition (DDT) in a supersonic combustor. The configuration studied was a rectangular channel with a supersonic inflow of stoichiometric ethylene-oxygen and a transimissive outflow boundary. The calculation is initialized with a velocity in the computational domain equal to that of the inflow, which is held constant for the duration of the calculation. The compressible reactive Navier-Stokes equations were solved by a high-order numerical algorithm on an adapting mesh. This paper describes two calculations, one with a Mach 3 inflow and one with Mach 5.25. In the Mach 3 case, the fuel-oxidizer mixture does not ignite and the flow reaches a steady-state oblique shock train structure. In the Mach 5.25 case, ignition occurs in the boundary layers and the flame front becomes unstable due to a Rayleigh-Taylor instability at the interface between the burned and unburned gas. Growth of the reaction front and expansion of the burned gas compress and preheat the unburned gas. DDT occurs in several locations, initiating both at the flame front and in the unburned gas, due to an energy-focusing mechanism. The growth of the flame instability that leads to DDT is analyzed using the Atwood number parameter.
△ Less
Submitted 14 November, 2017;
originally announced November 2017.
