Showing 1–50 of 64 results for author: Gong, D

Dynamically Polarized SERF Atomic Comagnetometer

Authors: Xiaofei Huang, Kai Wei, Yang Rui, Dinghui Gong, Saixin Zhou, Jie Zheng, Wei Quan

Abstract: Atomic spin sensors are essential for beyond-the-standard-model exploration, biomagnetic measurement, and quantum navigation. While the traditional DC mode spin-exchange relaxation-free (SERF) comagnetometer achieves ultrahigh sensitivity, further improvements require suppressing technical noise and surpassing standard quantum limit. In this work, we develop a K-Rb-$^{21}$Ne SERF atomic comagnetom… ▽ More Atomic spin sensors are essential for beyond-the-standard-model exploration, biomagnetic measurement, and quantum navigation. While the traditional DC mode spin-exchange relaxation-free (SERF) comagnetometer achieves ultrahigh sensitivity, further improvements require suppressing technical noise and surpassing standard quantum limit. In this work, we develop a K-Rb-$^{21}$Ne SERF atomic comagnetometer that dynamically polarizes the electron and nuclear spins, shielding signals from direct interference by pump light. We establish a three-phase evolutionary model for hybrid spin ensemble dynamics, yielding a complete analytical solution, and analyze the responses to various spin perturbations. Additionally, we achieve an averaged 38.5 $\%$ suppression of the polarization noise and identify the key factors that limit sensitivity improvements. The dynamically polarized comagnetometer exhibits effective suppression of technical noise and holds the potential to overcome quantum noise limit, while offering promising applications in exploring new physics and precise magnetic field measurements. △ Less

Submitted 23 May, 2025; originally announced May 2025.

Search for a parity-violating long-range spin-dependent interaction

Authors: Xing Heng, Zitong Xu, Xiaofei Huang, Dinghui Gong, Guoqing Tian, Wei Ji, Jiancheng Fang, Dmitry Budker, Kai Wei

Abstract: High-sensitivity quantum sensors are a promising tool for experimental searches for beyond-Standard-Model interactions. Here, we demonstrate an atomic comagnetometer operating under a resonantly-coupled hybrid spin-resonance (HSR) regime to probe P-odd, T-even interactions. The HSR regime enables robust nuclear-electron spin coupling, enhancing measurement bandwidth and stability without compromis… ▽ More High-sensitivity quantum sensors are a promising tool for experimental searches for beyond-Standard-Model interactions. Here, we demonstrate an atomic comagnetometer operating under a resonantly-coupled hybrid spin-resonance (HSR) regime to probe P-odd, T-even interactions. The HSR regime enables robust nuclear-electron spin coupling, enhancing measurement bandwidth and stability without compromising the high sensitivity of spin-exchange relaxation-free magnetometers. To minimize vibration noise from velocity-modulated sources, we implement a multistage vibration isolation system, achieving a vibration noise reduction exceeding 700-fold. We establish new constraints on vector-boson-mediated parity-violating interactions, improving experimental sensitivity by three orders of magnitude compared to previous limits. The new constraints complement existing astrophysical and laboratory studies of potential extensions to the Standard Model. △ Less

Submitted 1 May, 2025; originally announced May 2025.

Characteristics of Ge-doped Multi-Mode Fibers in Total Ionizing Dose

Authors: Datao Gong, Suen Hou, Bo-Jing Juang, Bin Lin, Chonghan Liu, Tiankuan Liu, Ming Qi, Yi Yang, Jingbo Ye, Lei Zhang, Li Zhang, HuiPing Zhu

Abstract: Purpose: The fiber optical links in 850 nm band with Ge-doped multi-mode (MM) fibers are well developed for data transmission at 10 Gbps and higher. The applications in nuclear environments require radiation resistance. The characteristics of Ge-doped MM fibers are investigated for Radiation Induced Attenuation (RIA) in Total Ionizing Dose (TID). Methods: Commercial samples of Ge-doped MM fibers… ▽ More Purpose: The fiber optical links in 850 nm band with Ge-doped multi-mode (MM) fibers are well developed for data transmission at 10 Gbps and higher. The applications in nuclear environments require radiation resistance. The characteristics of Ge-doped MM fibers are investigated for Radiation Induced Attenuation (RIA) in Total Ionizing Dose (TID). Methods: Commercial samples of Ge-doped MM fibers were irradiated in Go-60 gamma rays at dose rates of 5 to 1.4k Gy(SiO2)/hr. The fiber samples were packaged in water tanks maintained at constant temperatures in the range of -15 to 45 degC. The optical power transmitted through the fibers were recorded in irradiation, and in annealing when the source was shielded. The measurements of RIA in time are analyzed for dose rate and temperature dependences. Results: Ge-doped fiber samples of OM2 to OM4 grades were investigated for attenuation of optical power in radiation ionizing dose. Depending on the fabrication technology, two of the fiber types show radiation resistance with the RIAs of 0.2 dB/m and 0.05 dB/m, respectively, for the TID of 300 kGy(SiO2). At low dose rate of 5 Gy/hr, the RIA increases steadily and the annealing of low density ionizing defects does not cause notable deviation. At 1.4 kGy/hr the accumulated defects result to twice higher RIA during irradiation, and is worsen to a factor three in cold temperature. However, once the source is shielded the recovery is effective in a few hours. Conclusion: The telecom products of 850 nm Ge-doped MM fibers provide high speed communication in distances of a few hundred meters. The industrial fabrication methods provide fibers that can endure radiation ionizing dose for applications in nuclear instrumentation. △ Less

Submitted 7 April, 2025; originally announced April 2025.

Comments: 9 pages, 13 figures

Influence of Membrane Characteristics on Efficiency of Vacuum Membrane Distillation: a Lattice Boltzmann Study

Authors: Hongxuan Zhang, Dian Gong, Yiling Zhou, Zhangrong Qin, Binghai Wen

Abstract: With increasing water scarcity, membrane distillation technology has gained widespread attention as an innovative method for seawater desalination.However,existing studies often overlook the influence of membrane characteristics on mass transfer efficiency. This study, based on the lattice Boltzmann method,proposes a model for a novel Poly(tetraethynylpyrene) membrane material to reveal the influe… ▽ More With increasing water scarcity, membrane distillation technology has gained widespread attention as an innovative method for seawater desalination.However,existing studies often overlook the influence of membrane characteristics on mass transfer efficiency. This study, based on the lattice Boltzmann method,proposes a model for a novel Poly(tetraethynylpyrene) membrane material to reveal the influence of membrane characteristics on the performance of vacuum membrane distillation. The model considers the factors such as porosity, tortuosity, membrane thickness, pore size, membrane surface wettability and temperature difference on the permeate flux. The results show that the permeate flux increases linearly with the porosity and decreases exponentially with the tortuosity factor. There is an optimal membrane thickness range (2μm) beyond which the permeate flux decreases exponentially. In addition, the permeate flux increases exponentially with increasing temperature difference and pore size. Further analysis of the effect of membrane surface wettability shows that permeate flux increases with increasing hydrophobicity. Finally, the feed temperature and tortuosity factor have the largest effect on permeate flux,followed by membrane thickness and, subsequently, pore size. The model can be further extended to study other configurations of membrane distillation technologies. △ Less

Submitted 5 March, 2025; originally announced March 2025.

New Constraints on Axion Mediated Dipole-Dipole Interactions

Authors: Zitong Xu, Xing Heng, Guoqing Tian, Di Gong, Lei Cong, Wei Ji, Dmitry Budker, Kai Wei

Abstract: The search for axions sits at the intersection of solving critical problems in fundamental physics, including the strong CP problem in QCD, uncovering the nature of dark matter, and understanding the origin of the universe's matter-antimatter asymmetry. The measurement of axion-mediated spin-dependent interactions offers a powerful approach for axion detection. However, it has long been restricted… ▽ More The search for axions sits at the intersection of solving critical problems in fundamental physics, including the strong CP problem in QCD, uncovering the nature of dark matter, and understanding the origin of the universe's matter-antimatter asymmetry. The measurement of axion-mediated spin-dependent interactions offers a powerful approach for axion detection. However, it has long been restricted to regions outside the 'axion window' due to a significant trade-off: the need to effectively suppress the magnetic leakage from highly polarized spin sources while simultaneously detecting sub-femtotesla level exotic physics signals at sub-decimeter-scale distances. In this work, we report new experimental results on axion-mediated exotic spin-spin interactions using an iron-shielded SmCo$_5$ spin source in combination with a specially designed self-compensation comagnetometer. Employing a composite shielding structure, we achieved a suppression of the magnetic field by up to $10^{11}$. This enabled us to establish new constraints on the coupling between electrons and neutrons, surpassing previous experimental limits by more than 10000 times within the axion window. Furthermore, we also set strongest constraints on the coupling between electrons and protons. The proposed method holds substantial potential not only for advancing the search for new physics beyond the Standard Model but also for enabling transformative applications in biological and chemical research. △ Less

Submitted 14 January, 2025; originally announced January 2025.

Physics-informed Partitioned Coupled Neural Operator for Complex Networks

Authors: Weidong Wu, Yong Zhang, Lili Hao, Yang Chen, Xiaoyan Sun, Dunwei Gong

Abstract: Physics-Informed Neural Operators provide efficient, high-fidelity simulations for systems governed by partial differential equations (PDEs). However, most existing studies focus only on multi-scale, multi-physics systems within a single spatial region, neglecting the case with multiple interconnected sub-regions, such as gas and thermal systems. To address this, this paper proposes a Physics-Info… ▽ More Physics-Informed Neural Operators provide efficient, high-fidelity simulations for systems governed by partial differential equations (PDEs). However, most existing studies focus only on multi-scale, multi-physics systems within a single spatial region, neglecting the case with multiple interconnected sub-regions, such as gas and thermal systems. To address this, this paper proposes a Physics-Informed Partitioned Coupled Neural Operator (PCNO) to enhance the simulation performance of such networks. Compared to the existing Fourier Neural Operator (FNO), this method designs a joint convolution operator within the Fourier layer, enabling global integration capturing all sub-regions. Additionally, grid alignment layers are introduced outside the Fourier layer to help the joint convolution operator accurately learn the coupling relationship between sub-regions in the frequency domain. Experiments on gas networks demonstrate that the proposed operator not only accurately simulates complex systems but also shows good generalization and low model complexity. △ Less

Submitted 28 October, 2024; originally announced October 2024.

Topographic forcing of submesoscale instability in the Antarctic Circumpolar Current

Authors: Laur Ferris, Donglai Gong, John Klinck

Abstract: Subpolar frontal zones are characterized by energetic storms, intense seasonal cycles, and close connectivity with surrounding continental shelf topography. At the same time, predicting the ocean state depends on appropriate partition of resolved and parameterized dynamics, the latter of which requires understanding the dynamical processes generating diffusivity throughout the water column. While… ▽ More Subpolar frontal zones are characterized by energetic storms, intense seasonal cycles, and close connectivity with surrounding continental shelf topography. At the same time, predicting the ocean state depends on appropriate partition of resolved and parameterized dynamics, the latter of which requires understanding the dynamical processes generating diffusivity throughout the water column. While submesoscale frontal instabilities are shown to produce turbulent kinetic energy (TKE) and mixing in the surface boundary layer (SBL) of the global ocean, their development in complex dynamical regimes (e.g., elevated preexisting turbulence, large ageostrophic shear, or in proximity to topographic boundaries) is less understood. This study investigates the development of submesoscale instabilities, i.e. symmetric instability (SI) and centrifugal instability (CI), near topographic boundaries using a hindcast model of the Drake Passage and Scotia Sea region. The model suggests subsurface SI and CI are widespread along the northern continental margins of the Antarctic Circumpolar Current (ACC) due to topographic shearing of the anticyclonic side of Polar Front jets. Forced instabilities may facilitate persistent mixing along Namuncurá - Burwood Bank, as well as in other southern (northern) hemisphere currents with low potential vorticity and a seamount or sloping topography on the left- (right-) downstream side. △ Less

Submitted 14 October, 2024; originally announced October 2024.

Damping effects of viscous dissipation on growth of symmetric instability

Authors: Laur Ferris, Donglai Gong

Abstract: Symmetric instability (SI) is a frontal instability arising from the interaction of rotation with lateral and vertical shear of a frontal jet and is a generalization of shear, centrifugal, and gravitational instabilities. While the onset of SI has been studied in numerous observations and models, intuition about its growth in physical ocean comes primarily from constant-viscosity linear instabilit… ▽ More Symmetric instability (SI) is a frontal instability arising from the interaction of rotation with lateral and vertical shear of a frontal jet and is a generalization of shear, centrifugal, and gravitational instabilities. While the onset of SI has been studied in numerous observations and models, intuition about its growth in physical ocean comes primarily from constant-viscosity linear instability analysis and large eddy simulation (LES). A forward cascade arising from SI in the real ocean, where numerous fine-to-microscale processes interact with growing SI velocity cells, is less understood. While many instances of symmetrically unstable flow have been observed, observations of enhanced turbulent kinetic energy (TKE) dissipation ($ε$) at these sites are less common. We use numerical instability analysis of an idealized geostrophic jet to show that viscous-diffusive effects of preexisting turbulence from other turbulent processes (e.g., competing instabilities, internal wave processes, or boundary layer processes) can suppress the growth of SI in the real ocean. For example, a moderate level of ambient turbulence, represented by uniform diffusivity and viscosity of $κ=ν= 10^{-4} m^2/s$, restricts the wavelength range of SI's fastest-growing mode from $\mathcal{O}(10-100)$m to $\mathcal{O}(100)$m and elongates its e-folding timescale by $\mathcal{O}(1-10)$ hrs; suggesting the net viscous-diffusive effects of preexisting turbulence can damp the growth of SI. Viscous damping is one possible explanation for the rarity of SI structures in the real ocean, and our results motivate the inclusion of dependence on previous-timestep $ε$ or $κ$ when parameterizing SI in regional models. △ Less

Submitted 24 June, 2024; originally announced June 2024.

ETROC1: The First Full Chain Precision Timing Prototype ASIC for CMS MTD Endcap Timing Layer Upgrade

Authors: Xing Huang, Quan Sun, Datao Gong, Piljun Gwak, Doyeong Kim, Jongho Lee, Chonghan Liu, Tiankuan Liu, Tiehui Liu, Sergey Los, Sandeep Miryala, Shirsendu Nanda, Jamieson Olsen, Hanhan Sun, Jinyuan Wu, Jingbo Ye, Zhenyu Ye, Li Zhang, Wei Zhang

Abstract: We present the design and characterization of the first full chain precision timing prototype ASIC, named ETL Readout Chip version 1 (ETROC1) for the CMS MTD endcap timing layer (ETL) upgrade. The ETL utilizes Low Gain Avalanche Diode (LGAD) sensors to detect charged particles, with the goal to achieve a time resolution of 40 - 50 ps per hit, and 30 - 40 ps per track with hits from two detector la… ▽ More We present the design and characterization of the first full chain precision timing prototype ASIC, named ETL Readout Chip version 1 (ETROC1) for the CMS MTD endcap timing layer (ETL) upgrade. The ETL utilizes Low Gain Avalanche Diode (LGAD) sensors to detect charged particles, with the goal to achieve a time resolution of 40 - 50 ps per hit, and 30 - 40 ps per track with hits from two detector layers. The ETROC1 is composed of a 5 x 5 pixel array and peripheral circuits. The pixel array includes a 4 x 4 active pixel array with an H-tree shaped network delivering clock and charge injection signals. Each active pixel is composed of various components, including a bump pad, a charge injection circuit, a pre-amplifier, a discriminator, a digital-to-analog converter, and a time-to-digital converter. These components play essential roles as the front-end link in processing LGAD signals and measuring timing-related information. The peripheral circuits provide clock signals and readout functionalities. The size of the ETROC1 chip is 7 mm x 9 mm. ETROC1 has been fabricated in a 65 nm CMOS process, and extensively tested under stimuli of charge injection, infrared laser, and proton beam. The time resolution of bump-bonded ETROC1 + LGAD chipsets reaches 42 - 46 ps per hit in the beam test. △ Less

Submitted 2 September, 2024; v1 submitted 22 April, 2024; originally announced April 2024.

Comments: 14 pages, 15 figures

Report number: FERMILAB-PUB-24-0131-CMS-PPD

The 120Gbps VCSEL Array Based Optical Transmitter (ATx) Development for the High-Luminosity LHC (HL-LHC) Experiments

Authors: Di Guo, Chonghan Liu, Jinghong Chen, John Chramowicz, Binwei Deng, Datao Gong, Suen Hou, Ge Jin, Simon Kwan, Futian Liang, Xiaoting Li, Gang Liu, Tiankuan Liu, Alan Prosser, Da-Shung Su, Ping-Kun Teng, Tongye Xu, Jingbo Ye, Xiandong Zhao, Annie C. Xiang, Hao Liang

Abstract: The integration of a Verticle Cavity Surface-Emitting Laser (VCSEL) array and a driving Application-Specific Integrated Circuit (ASIC) in a custom optical array transmitter module (ATx) for operation in the detector front-end is constructed, assembled and tested. The ATx provides 12 parallel channels with each channel operating at 10 Gbps. The optical transmitter eye diagram passes the eye mask an… ▽ More The integration of a Verticle Cavity Surface-Emitting Laser (VCSEL) array and a driving Application-Specific Integrated Circuit (ASIC) in a custom optical array transmitter module (ATx) for operation in the detector front-end is constructed, assembled and tested. The ATx provides 12 parallel channels with each channel operating at 10 Gbps. The optical transmitter eye diagram passes the eye mask and the bit-error rate (BER) less than 1E-12 transmission is achieved at 10 Gbps/ch. The overall insertion loss including the radiation induced attenuation is sufficiently low to meet the proposed link budget requirement. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Comments: 10 pages, 9 figures

Optical Data Transmission ASICs for the High-Luminosity LHC (HL-LHC) Experiments

Authors: Xiaoting Li, Gang Liu, Jinghong Chen, Binwei Deng, Datao Gong, Di Guo, Mengxun He, Suen Hou, Guangming Huang, Ge Jin, Hao Liang, Futian Liang, Chonghan Liu, Tiankuan Liu, Xiangming Sun, Ping-Kun Teng, Annie C. Xiang, Jingbo Ye, Yang You, Xiandong Zhao

Abstract: We present the design and test results of two optical data transmission ASICs for the High-Luminosity LHC (HL-LHC) experiments. These ASICs include a two-channel serializer (LOCs2) and a single-channel Vertical Cavity Surface Emitting Laser (VCSEL) driver (LOCld1V2). Both ASICs are fabricated in a commercial 0.25-um Silicon-on-Sapphire (SoS) CMOS technology and operate at a data rate up to 8 Gbps… ▽ More We present the design and test results of two optical data transmission ASICs for the High-Luminosity LHC (HL-LHC) experiments. These ASICs include a two-channel serializer (LOCs2) and a single-channel Vertical Cavity Surface Emitting Laser (VCSEL) driver (LOCld1V2). Both ASICs are fabricated in a commercial 0.25-um Silicon-on-Sapphire (SoS) CMOS technology and operate at a data rate up to 8 Gbps per channel. The power consumption of LOCs2 and LOCld1V2 are 1.25 W and 0.27 W at 8-Gbps data rate, respectively. LOCld1V2 has been verified meeting the radiation-tolerance requirements for HL-LHC experiments. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Comments: 9 pages, 12 figures

The Design of a High Speed Low Power Phase Locked Loop

Authors: Tiankuan Liu, Datao Gong, Suen Hou, Zhihua Liang, Chonghan Liu, Da-Shung Su, Ping-Kun Teng, Annie C. Xiang, Jingbo Ye

Abstract: The upgrade of the ATLAS Liquid Argon Calorimeter readout system calls for the development of radiation tolerant, high speed and low power serializer ASIC. We have designed a phase locked loop using a commercial 0.25 um Silicon-on-Sapphire (SoS) CMOS technology. Post-layout simulation indicates that tuning range is 3.79-5.01 GHz and power consumption is 104 mW. The PLL has been submitted for fabri… ▽ More The upgrade of the ATLAS Liquid Argon Calorimeter readout system calls for the development of radiation tolerant, high speed and low power serializer ASIC. We have designed a phase locked loop using a commercial 0.25 um Silicon-on-Sapphire (SoS) CMOS technology. Post-layout simulation indicates that tuning range is 3.79-5.01 GHz and power consumption is 104 mW. The PLL has been submitted for fabrication. The design and simulation results are presented. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: 5 pages, 13 figures, Proceedings of the Topical Workshop on Electronics for Particle Physics 2009

Characteristics of the MTx optical transmitter in Total Ionizing Dose

Authors: D. Gong, S. Hou, B. J. Juang, J. -H. Li, C. Liu, T. Liu, M. Qi, J. Ye, Lei Zhang, Li Zhang, H. P. Zhu

Abstract: The dual-channel multi-mode 850 nm optical Miniature Transmitter (MTx) is developed for data transmission of the ATLAS LAr calorimeter readout at LHC. The MTx's are exposed to the radiation field of proton-proton collisions, therefore, the tolerance in Total Ionizing Dose (TID) is required. The TID effects in the MTx are investigated with X-rays and Co-60 gamma-rays for the active components of VC… ▽ More The dual-channel multi-mode 850 nm optical Miniature Transmitter (MTx) is developed for data transmission of the ATLAS LAr calorimeter readout at LHC. The MTx's are exposed to the radiation field of proton-proton collisions, therefore, the tolerance in Total Ionizing Dose (TID) is required. The TID effects in the MTx are investigated with X-rays and Co-60 gamma-rays for the active components of VCSEL diodes and the customized Link-on-Chip laser driver (LOCld) developed in 0.25 um Silicon-on-Sapphire CMOS technology. The irradiation tests were conducted at various dose rates. The responses to TID are observed with degradation of laser currents at initial dose of 10 to 100 Gy(SiO2), and partial recovery with additional TID to a stable output about 90 % of the original. The optical eye diagrams of irradiated samples show slightly increased jittering, and are suitable for the ATLAS requirement of 5 Gbps applications. △ Less

Submitted 28 April, 2024; v1 submitted 29 January, 2024; originally announced January 2024.

Comments: 7 pages, 10 figures

Development of A 16:1 serializer for data transmission at 5 Gbps

Authors: Datao Gong, Suen Hou, Zhihua Liang, Chonghan Liu, Tiankuan Liu, Da-Shun Su, Ping-Kun Teng, Annie C. Xiang, Jingbo Ye

Abstract: Radiation tolerant, high speed and low power serializer ASIC is critical for optical link systems in particle physics experiments. Based on a commercial 0.25 um silicon-on-sapphire CMOS technology, we design a 16:1 serializer with 5 Gbps serial data rate. This ASIC has been submitted for fabrication. The post-layout simulation indicates the deterministic jitter is 54 ps (pk-pk) and random jitter i… ▽ More Radiation tolerant, high speed and low power serializer ASIC is critical for optical link systems in particle physics experiments. Based on a commercial 0.25 um silicon-on-sapphire CMOS technology, we design a 16:1 serializer with 5 Gbps serial data rate. This ASIC has been submitted for fabrication. The post-layout simulation indicates the deterministic jitter is 54 ps (pk-pk) and random jitter is 3 ps (rms). The power consumption of the serializer is 500 mW. The design details and post layout simulation results are presented in this paper. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Comments: 5 pages, 12 figures, Proceedings of the Topical Workshop on Electronics for Particle Physics 2009

High-Speed Serial Optical Link Test Bench Using FPGA with Embedded Transceivers

Authors: Annie C. Xiang, Tingting Cao, Datao Gong, Suen Hou, Chonghan Liu, Tiankuan Liu, Da-Shung Su, Ping-Kun Teng, Jingbo Ye

Abstract: We develop a custom Bit Error Rate test bench based on Altera's Stratix II GX transceiver signal integrity development kit, demonstrate it on point-to-point serial optical link with data rate up to 5 Gbps, and compare it with commercial stand alone tester. The 8B/10B protocol is implemented and its effects studied. A variable optical attenuator is inserted in the fibre loop to induce transmission… ▽ More We develop a custom Bit Error Rate test bench based on Altera's Stratix II GX transceiver signal integrity development kit, demonstrate it on point-to-point serial optical link with data rate up to 5 Gbps, and compare it with commercial stand alone tester. The 8B/10B protocol is implemented and its effects studied. A variable optical attenuator is inserted in the fibre loop to induce transmission degradation and to measure receiver sensitivity. We report comparable receiver sensitivity results using the FPGA based tester and commercial tester. The results of the FPGA also shows that there are more one-to-zero bit flips than zero-to-one bit flips at lower error rate. In 8B/10B coded transmission, there are more word errors than bit flips, and the total error rate is less than two times that of non-coded transmission. Total error rate measured complies with simulation results, according to the protocol setup. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Comments: 5 pages, 8 figures, Proceedings of the Topical Workshop on Electronics for Particle Physics 2009

The Clock Distribution System for the ATLAS Liquid Argon Calorimeter Phase-I Upgrade Demonstrator

Authors: Binwei Deng, Hucheng Chen, Kai Chen, Jinghong Chen, Datao Gong, Di Guo, Xueye Hu, Deping Huang, James Kierstead, Xiaoting Li, Chonghan Liu, Tiankuan Liu, Annie C. Xiang, Hao Xu, Tongye Xu, Yang You, Jingbo Ye

Abstract: A prototype Liquid-argon Trigger Digitizer Board (LTDB), called the LTDB Demonstrator, has been developed to demonstrate the functions of the ATLAS Liquid Argon Calorimeter Phase-I trigger electronics upgrade. Forty Analog-to-Digital converters and four FPGAs with embedded multi-gigabit-transceivers on each Demonstrator need high quality clocks. A clock distribution system based on commercial comp… ▽ More A prototype Liquid-argon Trigger Digitizer Board (LTDB), called the LTDB Demonstrator, has been developed to demonstrate the functions of the ATLAS Liquid Argon Calorimeter Phase-I trigger electronics upgrade. Forty Analog-to-Digital converters and four FPGAs with embedded multi-gigabit-transceivers on each Demonstrator need high quality clocks. A clock distribution system based on commercial components has been developed for the Demonstrator. The design of the clock distribution system is presented. The performance of the clock distribution system has been evaluated. The components used in the clock distribution system have been qualified to meet radiation tolerance requirements of the Demonstrator. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Comments: 7 pages, 4 figures, Proceedings of the Topical Workshop on Electronics for Particle Physics 2014

The VCSEL-based Array Optical Transmitter (ATx) Development Towards 120-Gbps Link for Collider Detector: Development Update

Authors: Di Guo, Chonghan Liu, Jinghong Chen, John Chramowicz, Datao Gong, Suen Hou, Deping Huang, Ge Jin, Xiaoting Li, Tiankuan Liu, Alan Prosser, Ping-Kun Teng, Jingbo Ye, Yongzhao Zhou, Yang You, Annie C. Xiang, Hao Liang

Abstract: A compact radiation-tolerant array optical transmitter module (ATx) is developed to provide data transmission up to 10Gbps per channel with 12 parallel channels for collider detector applications. The ATx integrates a Vertical Cavity Surface-Emitting Laser (VCSEL) array and driver circuitry for electrical to optical conversion, an edge warp substrate for the electrical interface and a micro-lens a… ▽ More A compact radiation-tolerant array optical transmitter module (ATx) is developed to provide data transmission up to 10Gbps per channel with 12 parallel channels for collider detector applications. The ATx integrates a Vertical Cavity Surface-Emitting Laser (VCSEL) array and driver circuitry for electrical to optical conversion, an edge warp substrate for the electrical interface and a micro-lens array for the optical interface. This paper reports the continuing development of the ATx custom package. A simple, high-accuracy and reliable active-alignment method for the optical coupling is introduced. The radiation-resistance of the optoelectronic components is evaluated and the inclusion of a custom-designed array driver is discussed. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Comments: 8 pages, 8 figures

JTAG-based Remote Configuration of FPGAs over Optical Fibers

Authors: Binwei Deng, Chonghan Liu, Jinghong Chen, Kai Chen, Datao Gong, Di Guo, Suen Hou, Deping Huang, Xiaoting Li, Tiankuan Liu, Ping-Kun Teng, Annie C. Xiang, Hao Xu, Yang You, Jingbo Ye

Abstract: In this paper, a remote FPGA-configuration method based on JTAG extension over optical fibers is presented. The method takes advantage of commercial components and ready-to-use software such as iMPACT and does not require any hardware or software development. The method combines the advantages of the slow remote JTAG configuration and the fast local flash memory configuration. The method has been… ▽ More In this paper, a remote FPGA-configuration method based on JTAG extension over optical fibers is presented. The method takes advantage of commercial components and ready-to-use software such as iMPACT and does not require any hardware or software development. The method combines the advantages of the slow remote JTAG configuration and the fast local flash memory configuration. The method has been verified successfully and used in the Demonstrator of Liquid-Argon Trigger Digitization Board (LTDB) for the ATLAS liquid argon calorimeter Phase-I trigger upgrade. All components on the FPGA side are verified to meet the radiation tolerance requirements. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Comments: 8 pages, 4 figures

Phase transition like behaviors of Propagation of Passenger Stranding phenomena in Subway Networks

Authors: Xinyi Li, Shengda Zhao, Liang Wang, Qing Wang, Xun Zhang, Fang Liu, Xiaodong Zhang, Daqing Gong, Xinghua Zhang

Abstract: The subway as the most important transportation for daily urban commuting is a typical non-equilibrium complex system, composed of 2 types of basic units with service relationship. One challenge to operate it is passengers be stranded at stations, which arise from the spatiotemporal mismatch of supply scale and demand scale. More seriously, there is a special phenomenon of the propagation of passe… ▽ More The subway as the most important transportation for daily urban commuting is a typical non-equilibrium complex system, composed of 2 types of basic units with service relationship. One challenge to operate it is passengers be stranded at stations, which arise from the spatiotemporal mismatch of supply scale and demand scale. More seriously, there is a special phenomenon of the propagation of passenger stranding (PPS) by forming stranded stations clusters, which significantly reduces the service efficiency. In this study, Beijing subway as an example is studied to reveal the nature of PPS phenomena from a view point of statistical physics. The simulation results demonstrate phase-transition-like behaviors depending on the ratio of service supply scale and demand scale. The transition point can quantitatively characterize the resilience failure threshold of service. The eigen microstate method is used to extracting the fundamental patterns of PPS phenomena. Moreover, this study offers a theoretical foundation for strategies to improve service, such as topological planning and train timetable optimization. The methodology developed in present work has significant implications for study of other service systems. △ Less

Submitted 28 February, 2024; v1 submitted 12 January, 2024; originally announced January 2024.

Performance of a front-end prototype ASIC for the ATLAS High Granularity Timing Detector

Authors: C. Agapopoulou, L. A. Beresford, D. E. Boumediene, L. Castillo García, S. Conforti, C. de la Taille, L. D. Corpe, M. J. Da Cunha Sargedas de Sousa, P. Dinaucourt, A. Falou, V. Gautam, D. Gong, C. Grieco, S. Grinstein, S. Guindon, A. Howard, O. Kurdysh, E. Kuwertz, C. Li, N. Makovec, B. Markovic, G. Martin-Chassal, R. Mazzini, C. Milke, M. Morenas , et al. (12 additional authors not shown)

Abstract: This paper presents the design and characterisation of a front-end prototype ASIC for the ATLAS High Granularity Timing Detector, which is planned for the High-Luminosity phase of the LHC. This prototype, called ALTIROC1, consists of a 5$\times$5-pad matrix and contains the analog part of the single-channel readout (preamplifier, discriminator, two TDCs and SRAM). Two preamplifier architectures (t… ▽ More This paper presents the design and characterisation of a front-end prototype ASIC for the ATLAS High Granularity Timing Detector, which is planned for the High-Luminosity phase of the LHC. This prototype, called ALTIROC1, consists of a 5$\times$5-pad matrix and contains the analog part of the single-channel readout (preamplifier, discriminator, two TDCs and SRAM). Two preamplifier architectures (transimpedance and voltage) were implemented and tested. The ASIC was characterised both alone and as a module when connected to a 5$\times$5-pad array of LGAD sensors. In calibration measurements, the ASIC operating alone was found to satisfy the technical requirements for the project, with similar performances for both preamplifier types. In particular, the jitter was found to be 15$\pm$1~ps (35$\pm$1~ps) for an injected charge of 10~fC (4~fC). A degradation in performance was observed when the ASIC was connected to the LGAD array. This is attributed to digital couplings at the entrance of the preamplifiers. When the ASIC is connected to the LGAD array, the lowest detectable charge increased from 1.5~fC to 3.4~fC. As a consequence, the jitter increased for an injected charge of 4~fC. Despite this increase, ALTIROC1 still satisfies the maximum jitter specification (below 65~ps) for the HGTD project. This coupling issue also affects the time over threshold measurements and the time-walk correction can only be performed with transimpedance preamplifiers. Beam test measurements with a pion beam at CERN were also undertaken to evaluate the performance of the module. The best time resolution obtained using only ALTIROC TDC data was 46.3$\pm$0.7~ps for a restricted time of arrival range where the coupling issue is minimized. The residual time-walk contribution is equal to 23~ps and is the dominant electronic noise contribution to the time resolution at 15~fC. △ Less

Submitted 25 July, 2023; v1 submitted 15 June, 2023; originally announced June 2023.

Comments: 20 pages, 15 figures Second version submitted to JINST including minor changes applied to address journal's comments

MUX64, an analogue 64-to-1 multiplexer ASIC for the ATLAS High Granularity Timing Detector

Authors: Zifeng Xu, Li Zhang, Xing Huang, Qiyu Sha, Zhenwu Ge, Yimin Che, Datao Gong, Suen Hou, Jie Zhang, Tiankuan Liu, Zhijun Liang, Lei Zhang, Jingbo Ye, Ming Qi

Abstract: We present the design and the performance of MUX64, a 64-to-1 analogue multiplexer ASIC for the ATLAS High Granularity Timing Detector (HGTD). The MUX64 transmits one of its 64 inputs selected by six address lines for the voltages or temperatures being monitored to an lpGBT ADC channel. The prototype ASICs fabricated in TSMC 130 nm CMOS technology were prepared in wire-bonding and QFN88 packaging… ▽ More We present the design and the performance of MUX64, a 64-to-1 analogue multiplexer ASIC for the ATLAS High Granularity Timing Detector (HGTD). The MUX64 transmits one of its 64 inputs selected by six address lines for the voltages or temperatures being monitored to an lpGBT ADC channel. The prototype ASICs fabricated in TSMC 130 nm CMOS technology were prepared in wire-bonding and QFN88 packaging format. A total of 280 chips was examined for functionality and quality assurance. The accelerated aging test conducted at 85 degrees celsius shows negligible degradation over 16 days. △ Less

Submitted 23 February, 2023; originally announced February 2023.

GBT20, a 20.48 Gbps PAM4 Optical Transmitter Module for Particle Physics Experiments

Authors: B. Deng, L. Zhang, C. -P. Chao, S. -W. Chen, E. Cruda, D. Gong, S. Hou, G. Huang, X. Huang, C. -Y. Li, C. Liu, T. Liu, E. R. Liu, Q. Sun, X. Sun, G. Wong, J. Ye

Abstract: We present a pluggable radiation-tolerant 4-level Pulse-Amplitude-Modulation (PAM4) optical transmitter module called GBT20 (Giga-Bit Transmitter at 20 Gbps) for particle-physics experiments. GBT20 has an OSFP or firefly connector to input 16-bit data each at 1.28 Gbps. The GBT20 drives a VCSEL die with an LC lens or a VCSEL TOSA and interfaces an optical fiber with a standard LC connector. The mi… ▽ More We present a pluggable radiation-tolerant 4-level Pulse-Amplitude-Modulation (PAM4) optical transmitter module called GBT20 (Giga-Bit Transmitter at 20 Gbps) for particle-physics experiments. GBT20 has an OSFP or firefly connector to input 16-bit data each at 1.28 Gbps. The GBT20 drives a VCSEL die with an LC lens or a VCSEL TOSA and interfaces an optical fiber with a standard LC connector. The minimum module, including the host connector, occupies 41 mm x 13 mm x 6 mm. At 20.48 Gbps, the minimum Transmitter Dispersion Eye Closure Quaternary (TDECQ) is around 0.7 dB. The power consumption is around 164 mW in the low-power mode. The SEE cross-section is below 7.5x10^(-14) cm^2. No significant performance degrades after a TID of 5.4 kGy. △ Less

Submitted 15 February, 2023; originally announced February 2023.

Comments: 7 pages, 7 figures

An FPGA-based readout chip emulator for the CMS ETL detector upgrade

Authors: L. Zhang, C. Edwards, D. Gong, X. Huang, J. Lee, C. Liu, T. Liu, T. Liu, J. Olsen, Q. Sun, J. Wu, J. Ye, W Zhang

Abstract: We present an FPGA-based readout chip emulator board for the CMS Endcap Timing Layer (ETL) detector upgrade. The emulator board uses an Intel Cyclone 10 GX FPGA to emulate the digital functions of four Endcap Layer Readout Chips (ETROCs). Based on the actual ETROC design, the firmware is implemented and verified. The emulator board is being used for the ETROC digital design verification and system… ▽ More We present an FPGA-based readout chip emulator board for the CMS Endcap Timing Layer (ETL) detector upgrade. The emulator board uses an Intel Cyclone 10 GX FPGA to emulate the digital functions of four Endcap Layer Readout Chips (ETROCs). Based on the actual ETROC design, the firmware is implemented and verified. The emulator board is being used for the ETROC digital design verification and system development. △ Less

Submitted 2 February, 2023; originally announced February 2023.

Comments: 8 pages, 4 figures

The design and test results of A Giga-Bit Cable Receiver (GBCR) for the ATLAS Inner Tracker Pixel Detector

Authors: L. Zhang, D. Gong, T. Liu, C. Chen, B. Deng, S. Hou, G. Huang, X. Huang, C. Liu, P. Moreira, Q. Sun, X. Sun, S. Kulis, J. Ye, W. Zhang

Abstract: This paper presents the design and test results of a Gigabit Cable Receiver ASIC called GBCR for the HL-LHC upgrade of the ATLAS Inner Tracker (ITk) pixel detector. Three prototypes (GBCR1, GBCR2, and GBCR3) have been designed in the CERN-identified 65 nm CMOS technology. GBCR receives seven (GBCR2) or six (GBCR3) channels (RX) each at 1.28 Gbps from the front-end readout chip RD53B via flex cable… ▽ More This paper presents the design and test results of a Gigabit Cable Receiver ASIC called GBCR for the HL-LHC upgrade of the ATLAS Inner Tracker (ITk) pixel detector. Three prototypes (GBCR1, GBCR2, and GBCR3) have been designed in the CERN-identified 65 nm CMOS technology. GBCR receives seven (GBCR2) or six (GBCR3) channels (RX) each at 1.28 Gbps from the front-end readout chip RD53B via flex cables up to 1 meter and Twinax cables up to 5 meters and sends the equalized and retimed signals to lpGBT. Both GBCR2 and GBCR3 ASICs have two transmitting channels (TX) that pre-emphasize the signals from lpGBT before sending them to RD53B through the same cables. No Single-Event Upset (SEU) is observed in any tested channels of GBCR2 in a 400 MeV proton beam. The extrapolated bit error rate for the future HL-LHC application is below 8*10^(-16), significantly below the specified BER criterion. GBCR3 is designed to improve the immunity to single-event-upset by applying the Triple Modular Redundancy (TMR) technology to all RX channels. The retimed signals from GBCR3 have less total jitter than those from GBCR2 (35 ps versus 79 ps). Each receiver channel of GBCR3 consumes 75% more power than that of GBCR2. △ Less

Submitted 30 January, 2023; originally announced January 2023.

Comments: 7 pages, 5 figures

A High-resolution Clock Phase Shifter Circuitry for ALTIROC

Authors: X. Huang, C. de La Taille, D. Gong, C. Liu, T. Liu, M. Morenas, N. Seguin-Moreau, J. Ye, L. Zhang

Abstract: A high-resolution clock phase shifter is implemented to adjust the phase of multiple clocks at 40 MHz, 80 MHz, or 640 MHz in the ALTIROC chip. The phase shifter has a coarse-phase shifter and a fine-phase shifter to achieve a step size of 97.7 ps and an adjustable range of 25 ns. The fine delay unit is based on a Delay Locked Loop (DLL) operating at 640 MHz. The phase shifter is fabricated in a 13… ▽ More A high-resolution clock phase shifter is implemented to adjust the phase of multiple clocks at 40 MHz, 80 MHz, or 640 MHz in the ALTIROC chip. The phase shifter has a coarse-phase shifter and a fine-phase shifter to achieve a step size of 97.7 ps and an adjustable range of 25 ns. The fine delay unit is based on a Delay Locked Loop (DLL) operating at 640 MHz. The phase shifter is fabricated in a 130 nm CMOS process. The area of the phase shifter is 725 um x 248 um. The Differential Non-Linearity (DNL) and the Integral Non-Linearity (INL) are +/-0.6 LSB and +/-0.75 LSB, respectively. The jitter from -25 C to 20 C is less than 15.5 ps (RMS), including the contributions from the FPGA clock source and the PLL. The power consumption is 11.2 mW. △ Less

Submitted 13 January, 2023; originally announced January 2023.

Comments: 7 pages, 8 figures

A 40 Gbps Optical Transceiver for Particle Physics Experiments

Authors: B. Deng, X. Huang, H. Sun, C. -P. Chao, S. -W. Chen, D. Gong, S. Hou, G. Huang, C. -Y. Li, C. Liu, T. Liu, Q. Sun, J. Ye, L. Zhang, W. Zhang

Abstract: We present the design and the test results of a quad-channel optical transceiver module (QTRx) possibly for future particle physics experiments. The transmitters of QTRx, each at 10 Gbps, are based on a Quad-channel VCSEL Diode array Driver (QLDD) and 1 x 4 VCSEL array. The receivers of QTRx, with data rates of 2.56 Gbps or 10 Gbps per channel, are based on a Quad-channel Trans-Impedance and limit… ▽ More We present the design and the test results of a quad-channel optical transceiver module (QTRx) possibly for future particle physics experiments. The transmitters of QTRx, each at 10 Gbps, are based on a Quad-channel VCSEL Diode array Driver (QLDD) and 1 x 4 VCSEL array. The receivers of QTRx, with data rates of 2.56 Gbps or 10 Gbps per channel, are based on a Quad-channel Trans-Impedance and limiting Amplifier (QTIA) and 1 x 4 photodiode array of GaAs or InGaAs. QTRx is 20 mm x 10 mm x 5 mm and couples to an MT fiber connector. Test results indicate that QTRx achieves the design goals with a power consumption of 124 mW per transmitter channel at 10 Gbps and 120 mW at 2.56 Gbps for the receiver channel with an on-chip charge pump. The sensitivities of QTIA are -17 dBm at 2.56 Gbps and -8 dBm at 10 Gbps, respectively. Further improvements with a gold-finger interface and a more compact optical lens are being designed. △ Less

Submitted 11 March, 2022; originally announced March 2022.

Comments: 7 pages, 7 figures

A prototype optical link board with redundancy design for the ATLAS liquid argon calorimeter Phase-2 upgrade

Authors: X. Huang, C. Liu, A. Deiana, B. Deng, D. Gong, L. Hasley, S. Hou, T. Liu, H. Sun, J. Ye, L. Zhang, W. Zhang

Abstract: A prototype optical-link board has been developed for the ATLAS Liquid Argon Calorimeter Phase-2 upgrade. The board consists of 24 lpGBT chips and 8 VTRx+ modules and demonstrates the full optical link design of the future front-end board. The board has 22 simplex optical links to transmit detector data, which are emulated in FPGAs and injected through 6 FMC connectors, to the off-detector electro… ▽ More A prototype optical-link board has been developed for the ATLAS Liquid Argon Calorimeter Phase-2 upgrade. The board consists of 24 lpGBT chips and 8 VTRx+ modules and demonstrates the full optical link design of the future front-end board. The board has 22 simplex optical links to transmit detector data, which are emulated in FPGAs and injected through 6 FMC connectors, to the off-detector electronics. The board implements 2 duplex optical links for clocks, control, and monitoring with redundant design to improve the system reliability. Data transmission and all redundant designs have been verified. A fiber routing scheme, in which 2 or 3 VTRx+ modules are re-connected to the front panel with an MPO connector, has been prototyped. △ Less

Submitted 11 March, 2022; originally announced March 2022.

Comments: 7 pages, 5 figures

The Phase-I Trigger Readout Electronics Upgrade of the ATLAS Liquid Argon Calorimeters

Authors: G. Aad, A. V. Akimov, K. Al Khoury, M. Aleksa, T. Andeen, C. Anelli, N. Aranzabal, C. Armijo, A. Bagulia, J. Ban, T. Barillari, F. Bellachia, M. Benoit, F. Bernon, A. Berthold, H. Bervas, D. Besin, A. Betti, Y. Bianga, M. Biaut, D. Boline, J. Boudreau, T. Bouedo, N. Braam, M. Cano Bret , et al. (173 additional authors not shown)

Abstract: The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Cons… ▽ More The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Consequently, the background rejection at trigger level is improved through enhanced filtering algorithms utilizing the additional information for topological discrimination of electromagnetic and hadronic shower shapes. This paper presents the final designs of the new electronic elements, their custom electronic devices, the procedures used to validate their proper functioning, and the performance achieved during the commissioning of this system. △ Less

Submitted 16 May, 2022; v1 submitted 15 February, 2022; originally announced February 2022.

Comments: 56 pages, 41 figures, 6 tables

Journal ref: 2022 JINST 17 P05024

Response of a Commercial 0.25 um Thin-Film Silicon-on-Sapphire CMOS Technology to Total Ionizing Dose

Authors: Michael P. King, Datao Gong, Chonghan Liu, Tiankuan Liu, Annie C. Xiang, Jinbo Ye, Ronald D. Schrimpf, Robert A. Reed, Michael L. Alles, Daniel M. Fleetwood

Abstract: The radiation response of a 0.25 um silicon-on-sapphire CMOS technology is characterized at the transistor and circuit levels utilizing both standard and enclosed layout devices. Device-level characterization showed threshold voltage change of less than 170 mV and leakage current change of less than 1 nA for individual nMOSFET and pMOSFET devices at a total dose of 100 krad(SiO2). The increase in… ▽ More The radiation response of a 0.25 um silicon-on-sapphire CMOS technology is characterized at the transistor and circuit levels utilizing both standard and enclosed layout devices. Device-level characterization showed threshold voltage change of less than 170 mV and leakage current change of less than 1 nA for individual nMOSFET and pMOSFET devices at a total dose of 100 krad(SiO2). The increase in power supply current at the circuit level was less than 5%, consistent with the small change in off-state transistor leakage current. The technology exhibits good characteristics for use in the electronics of the ATLAS experiment at the Large Hadron Collider. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Comments: 5 pages, 5 figures

Journal ref: JINST 5 C11021 (2010)

R&D Towards Cryogenic Optical Links

Authors: Mark Christiansen, Raphael Galea, Datao Gong, Suen Hou, David Lissauer, Chonghan Liu, Tiankuan Liu, Veljko Radeka, Pavel Rehak, John Sondericker, Ryszard Stroynowski, Da-Shung Su, Peter Takacs, Helio Takai, Valeri Tcherniatine, Ping-Kun Teng, Craig Thorn, Annie C. Xiang, Jingbo Ye, Bo Yu

Abstract: A number of critical active and passive components of optical links have been tested at 77 K or lower temperatures, demonstrating potential development of optical links operating inside the liquid argon time projection chamber (LArTPC) detector cryostat. A ring oscillator, individual MOSFETs, and a high speed 16:1 serializer fabricated in a commercial 0.25-um silicon-on-sapphire CMOS technology co… ▽ More A number of critical active and passive components of optical links have been tested at 77 K or lower temperatures, demonstrating potential development of optical links operating inside the liquid argon time projection chamber (LArTPC) detector cryostat. A ring oscillator, individual MOSFETs, and a high speed 16:1 serializer fabricated in a commercial 0.25-um silicon-on-sapphire CMOS technology continued to function from room temperature to 4.2 K, 15 K, and 77 K respectively. Three types of laser diodes lase from room temperature to 77 K. Optical fibers and optical connectors exhibited minute attenuation changes from room temperature to 77 K. △ Less

Submitted 10 February, 2022; originally announced February 2022.

Comments: 8 pages, 10 figures

Journal ref: JINST 5 C12030 (2010)

Cryogenic digital data links for the liquid argon time projection chamber

Authors: Tiankuan Liu, Datao Gong, Suen Hou, Chonghan Liu, Da-Shung Su, Ping-kun Teng, Annie C. Xiang, Jingbo Ye

Abstract: In this paper we present the cryogenic functionality of the components of data links for the Liquid Argon Time Projection Chamber (LArTPC), a potential far site detector technology of the Long-Baseline Neutrino Experiment (LBNE). We have confirmed that an LVDS driver can drive a 20-meter CAT5E twisted pair up to 1 gigabit per second at the liquid nitrogen temperature (77 K). We have verified that… ▽ More In this paper we present the cryogenic functionality of the components of data links for the Liquid Argon Time Projection Chamber (LArTPC), a potential far site detector technology of the Long-Baseline Neutrino Experiment (LBNE). We have confirmed that an LVDS driver can drive a 20-meter CAT5E twisted pair up to 1 gigabit per second at the liquid nitrogen temperature (77 K). We have verified that a commercial-off-the-shelf (COTS) serializer, a laser diode driver, laser diodes, optical fibers and connectors, and field-programming gate arrays (FPGA's) continue to function at 77 K. A variety of COTS resistors and capacitors have been tested at 77 K. All tests we have conducted show that the cryogenic digital data links for the liquid argon time projection chamber are promising. △ Less

Submitted 10 February, 2022; originally announced February 2022.

Comments: 15 pages, 9 figures

Journal ref: JINST 7 C01091 (2012)

The Miniature Optical Transmitter and Transceiver For the High-Luminosity LHC (HL-LHC) experiments

Authors: Chonghan Liu, Xiandong Zhao, Jinghong Chen, Binwei Deng, Datao Gong, Di Guo, Deping Huang, Suen Hou, Xiaoting Li, Futian Liang, Gang Liu, Tiankuan Liu, Ping-Kun Teng, Annie C. Xiang, Jingbo Ye

Abstract: We present the design and test results of the Miniature optical Transmitter (MTx) and Transceiver (MTRx) for the high luminosity LHC (HL-LHC) experiments. MTx and MTRx are Transmitter Optical Subassembly (TOSA) and Receiver Optical Subassembly (ROSA) based. There are two major developments: the Vertical Cavity Surface Emitting Laser (VCSEL) driver ASIC LOCld and the mechanical latch that provides… ▽ More We present the design and test results of the Miniature optical Transmitter (MTx) and Transceiver (MTRx) for the high luminosity LHC (HL-LHC) experiments. MTx and MTRx are Transmitter Optical Subassembly (TOSA) and Receiver Optical Subassembly (ROSA) based. There are two major developments: the Vertical Cavity Surface Emitting Laser (VCSEL) driver ASIC LOCld and the mechanical latch that provides the connection to fibers. In this paper, we concentrate on the justification of this work, the design of the latch and the test results of these two modules with a Commercial Off-The-Shelf (COTS) VCSEL driver. △ Less

Submitted 9 February, 2022; originally announced February 2022.

Comments: 5 pages, 7 figures

A line code with quick-resynchronization capability and low latency for the optical data links of LHC experiments

Authors: Binwei Deng, Mengxun He, Jinghong Chen, Di Guo, Suen Hou, Xiaoting Li, Chonghan Liu, Ping-Kun Teng, Annie C. Xiang, Yang You, Jingbo Ye, Datao Gong, Tiankuan Liu

Abstract: We propose a line code that has fast resynchronization capability and low latency. Both the encoder and decoder have been implemented in FPGAs. The encoder has also been implemented in an ASIC. The latency of the whole optical link (not including the optical fiber) is estimated to be less than 73.9 ns. In the case of radiation-induced link synchronization loss, the decoder can recover the synchron… ▽ More We propose a line code that has fast resynchronization capability and low latency. Both the encoder and decoder have been implemented in FPGAs. The encoder has also been implemented in an ASIC. The latency of the whole optical link (not including the optical fiber) is estimated to be less than 73.9 ns. In the case of radiation-induced link synchronization loss, the decoder can recover the synchronization in 25 ns. The line code will be used in the ATLAS liquid argon calorimeter Phase-I trigger upgrade and can also be potentially used in other LHC experiments. △ Less

Submitted 9 February, 2022; originally announced February 2022.

Comments: 10 pages, 7 figures

Component Prototypes towards a Low-Latency, Small-form-factor Optical Link for the ATLAS Liquid Argon Calorimeter Phase-I Trigger Upgrade

Authors: Binwei Deng, Mengxun He, Jinghong Chen, Datao Gong, Di Guo, Suen Hou, Xiaoting Li, Futian Liang, Chonghan Liu, Gang Liu, Ping-Kun Teng, Annie C Xiang, Tongye Xu, You Yang, Jingbo Ye, Xiandong Zhao, Tiankuan Liu

Abstract: This paper presents several component prototypes towards a low-latency, small-form-factor optical link designed for the ATLAS Liquid Argon Calorimeter Phase-I trigger upgrade. A prototype of the custom-made dual-channel optical transmitter module, the Miniature optical Transmitter (MTx), with separate transmitter optical sub-assemblies (TOSAs) has been demonstrated at data rates up to 8 Gbps per c… ▽ More This paper presents several component prototypes towards a low-latency, small-form-factor optical link designed for the ATLAS Liquid Argon Calorimeter Phase-I trigger upgrade. A prototype of the custom-made dual-channel optical transmitter module, the Miniature optical Transmitter (MTx), with separate transmitter optical sub-assemblies (TOSAs) has been demonstrated at data rates up to 8 Gbps per channel. A Vertical-Cavity Surface-Emitting Laser (VCSEL) driver ASIC has been developed and is used in the current MTx prototypes. A serializer ASIC prototype, operating at up to 8 Gbps per channel, has been designed and tested. A low-latency, low-overhead encoder ASIC prototype has been designed and tested. The latency of the whole link, including the transmitter latency and the receiver latency but not the latency of the fiber, is estimated to be less than 57.9 ns. The size of the MTx is 45 mm x 15 mm x 6 mm. △ Less

Submitted 9 February, 2022; originally announced February 2022.

Comments: 12 pages, 13 figures

A 20 Gbps PAM4 Data Transmitter ASIC for Particle Physics Experiments

Authors: L. Zhang, E. M. Cruda, C-P. Chao, S-W. Chen, B. Deng, R. Francisco, D. Gong, D. Guo, S. Hou, G. Huang, X. Huang, S. Kulis, C-Y. Li, C. Liu, E. R. Liu, T. Liu, P. Moreira, J. Prinzie, H. Sun, Q. Sun, X. Sun, G. Wong, D. Yang, J. Ye, W. Zhang

Abstract: We present the design and test results of a novel data transmitter ASIC operating up to 20.48 Gbps with 4-level Pulse-Amplitude-Modulation (PAM4) for particle physics experiments. This ASIC, named GBS20, is fabricated in a 65 nm CMOS technology. Two serializers share a 5.12 GHz Phase Locked Loop (PLL) clock. The outputs from the serializers are combined into a PAM4 signal that directly drives a Ve… ▽ More We present the design and test results of a novel data transmitter ASIC operating up to 20.48 Gbps with 4-level Pulse-Amplitude-Modulation (PAM4) for particle physics experiments. This ASIC, named GBS20, is fabricated in a 65 nm CMOS technology. Two serializers share a 5.12 GHz Phase Locked Loop (PLL) clock. The outputs from the serializers are combined into a PAM4 signal that directly drives a Vertical-Cavity-Surface-Emitting-Laser (VCSEL). The input data channels, each at 1.28 Gbps, are scrambled with an internal 27-1 Pseudo-Random Binary Sequence (PRBS), which also serves as a frame aligner. GBS20 is tested to work at 10.24 and 20.48 Gbps with a VCSEL-based Transmitter-Optical-Subassembly (TOSA). The power consumption of GBS20 is below 238 mW and reduced to 164 mW in the low-power mode. △ Less

Submitted 7 February, 2022; originally announced February 2022.

Comments: 7 pages, 7 figures

QTIA, a 2.5 or 10 Gbps 4-Channel Array Optical Receiver ASIC in a 65 nm CMOS Technology

Authors: H. Sun, X. Huang, C. -P. Chao, S. -W. Chen, B. Deng, D. Gong, S. Hou, G. Huang, S. Kulis, C. -Y. Li, C. Liu, T. Liu, P. Moreira, Q. Sun, J. Ye, L. Zhang, W. Zhang

Abstract: The Quad transimpedance and limiting amplifier (QTIA) is a 4-channel array optical receiver ASIC, developed using a 65 nm CMOS process. It is configurable between the bit rate of 2.56 Gbps and 10 Gbps per channel. QTIA offers careful matching to both GaAs and InGaAs photodiodes. At this R&D stage, each channel has a different biasing scheme to the photodiode for optimal coupling. A charge pump is… ▽ More The Quad transimpedance and limiting amplifier (QTIA) is a 4-channel array optical receiver ASIC, developed using a 65 nm CMOS process. It is configurable between the bit rate of 2.56 Gbps and 10 Gbps per channel. QTIA offers careful matching to both GaAs and InGaAs photodiodes. At this R&D stage, each channel has a different biasing scheme to the photodiode for optimal coupling. A charge pump is implemented in one channel to provide a higher reverse bias voltage, which is especially important to mitigate radiation effects on the photodiodes. The circuit functions of QTIA successfully passed the lab tests with GaAs photodiodes. △ Less

Submitted 11 February, 2022; v1 submitted 24 October, 2021; originally announced October 2021.

Comments: 6 pages, 6 figures, accepted for publication in JINST (TWEPP2021)

A radiation tolerant clock generator for the CMS Endcap Timing Layer readout chip

Authors: H. Sun, Q. Sun, S. Biereigel, R. Francisco, D. Gong, G. Huang, X. Huang, S. Kulis, P. Leroux, C. Liu, T. Liu, T. Liu, P. Moreira, J. Prinzie, J. Wu, J. Ye, L. Zhang, W. Zhang

Abstract: We present the test results of a low jitter Phase Locked Loop (PLL) prototype chip for the CMS Endcap Timing Layer readout chip (ETROC). This chip is based on the improved version of a clock synthesis circuit named ljCDR from the Low-Power Gigabit Transceiver (lpGBT) project. The ljCDR is tested in its PLL mode. An automatic frequency calibration (AFC) block with the Triple Modular Redundancy (TMR… ▽ More We present the test results of a low jitter Phase Locked Loop (PLL) prototype chip for the CMS Endcap Timing Layer readout chip (ETROC). This chip is based on the improved version of a clock synthesis circuit named ljCDR from the Low-Power Gigabit Transceiver (lpGBT) project. The ljCDR is tested in its PLL mode. An automatic frequency calibration (AFC) block with the Triple Modular Redundancy (TMR) register is developed for the LC-oscillator calibration. The chip was manufactured in a 65 nm CMOS process with 10 metal layers. The chip has been extensively tested, including Total Ionizing Dose (TID) testing up to 300 Mrad and Single Event Upset (SEU) testing with heavy ions possessing a Linear energy transfer (LET) from 1.3 to 62.5 MeV*cm^2/mg. △ Less

Submitted 11 February, 2022; v1 submitted 24 October, 2021; originally announced October 2021.

Comments: 5 pages, 6 figures, Accepted for publication in JINST (TWEPP2021)

Journal ref: 2022 JINST 17 C03038

In-pixel automatic threshold calibration for the CMS Endcap Timing Layer readout chip

Authors: H. Sun, D. Gong, C. Edwards, G. Huang, X. Huang, C. Liu, T. Liu, T. Liu, J. Olsen, Q. Sun, J. Wu, J. Ye, L. Zhang, W. Zhang

Abstract: We present the implementation and verification of an in-pixel automatic threshold calibration circuit for the CMS Endcap Timing Layer (ETL) in the High-Luminosity LHC upgrade. The discriminator threshold of the ETL readout chip (ETROC) needs to be calibrated regularly to mitigate the circuit baseline change. Traditional methods need a lot of communication through a slow control system hence are ti… ▽ More We present the implementation and verification of an in-pixel automatic threshold calibration circuit for the CMS Endcap Timing Layer (ETL) in the High-Luminosity LHC upgrade. The discriminator threshold of the ETL readout chip (ETROC) needs to be calibrated regularly to mitigate the circuit baseline change. Traditional methods need a lot of communication through a slow control system hence are time-consuming. This paper describes an in-pixel automatic scheme with improvements in operating time and usability. In this scheme, a sample-accumulation circuit is used to measure the average discriminator output. A binary successive approximation and linear combination scan are applied to find the equivalent baseline. The actual calibration procedure has been first implemented in FPGA firmware and tested with the ETROC front-end prototype chip (ETROC0). The calibration circuit has been implemented with Triple Modular Redundancy (TMR) and verified with Single Event Effects (SEEs) simulation. A complete calibration process lasts 35 ms with a 40 MHz clock. In the worst case, the dynamic and static power consumption are estimated to be 300 uW and 10.4 uW, respectively. The circuit design, implemented in a 65 CMOS technology, will be integrated into ETROC2, the next iteration of the ETROC with a 16x16 pixel matrix. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Comments: 13 pages, 12 figures

Journal ref: 2021 JINST 16 T09006

Quality control tests of the front-end optical link components for the ATLAS Liquid Argon Calorimeter Phase-1 upgrade

Authors: B. Deng, J. Thomas, L. Zhang, E. Baker, A. Barsallo, M. L. Bleile, C. Chen, I. Cohen, E. Cruda, J. Fang, N. Feng, D. Gong, S. Hou, X. Huang, T. Lozano-Brown, C. Liu, T. Liu, A. Muhammad, L. A. Murphy, P. M. Price, J. H. Ray, C. Rhoades, A. H. Santhi, D. Sela, H. Sun , et al. (7 additional authors not shown)

Abstract: We present the procedures and results of the quality control tests for the front-end optical link components in the ATLAS Liquid Argon Calorimeter Phase-1 upgrade. The components include a Vertical-Cavity Surface-Emitting Laser (VCSEL) driver ASIC LOCld, custom optical transmitter/transceiver modules MTx/MTRx, and a transmitter ASIC LOCx2. LOCld, MTx, and LOCx2 each contain two channels with the s… ▽ More We present the procedures and results of the quality control tests for the front-end optical link components in the ATLAS Liquid Argon Calorimeter Phase-1 upgrade. The components include a Vertical-Cavity Surface-Emitting Laser (VCSEL) driver ASIC LOCld, custom optical transmitter/transceiver modules MTx/MTRx, and a transmitter ASIC LOCx2. LOCld, MTx, and LOCx2 each contain two channels with the same structure, while MTRx has a transmitter channel and a receiver channel. Each channel is tested at 5.12 Gbps. A total of 5341 LOCld chips, 3275 MTx modules, 797 MTRx modules, and 3198 LOCx2 chips are qualified. The yields are 73.9%, 98.0%, 98.4%, and 61.9% for LOCld, LOCx2, MTx, and MTRx, respectively. △ Less

Submitted 9 August, 2021; originally announced August 2021.

Comments: 18 pages, 17 figures

Characterization and quality control test of a gigabit cable receiver ASIC (GBCR2) for the ATLAS Inner Tracker Detector upgrade

Authors: W. Zhang, C. Chen, D. Gong, S. Hou, G. Huang, X. Huang, C. Liu, T. Liu, H. Sun, X. Sun, P. Wang, J. Ye, L. Zhang

Abstract: We present the characterization and quality control test of a gigabit cable receiver ASIC prototype, GBCR2, for the ATLAS Inner Tracker pixel detector upgrade. GBCR2 equalizes and retimes the uplink electrical signals from RD53B through a 6 m Twinax AWG34 cable to lpGBT. GBCR2 also pre-emphasizes downlink command signals through the same electrical connection from lpGBT to RD53B. GBCR2 has seven u… ▽ More We present the characterization and quality control test of a gigabit cable receiver ASIC prototype, GBCR2, for the ATLAS Inner Tracker pixel detector upgrade. GBCR2 equalizes and retimes the uplink electrical signals from RD53B through a 6 m Twinax AWG34 cable to lpGBT. GBCR2 also pre-emphasizes downlink command signals through the same electrical connection from lpGBT to RD53B. GBCR2 has seven uplink channels each at 1.28 Gbps and two downlink channels each at 160 Mbps. The prototype is fabricated in a 65 nm CMOS process. The characterization of GBCR2 has been demonstrated that the total jitter of the output signal is 129.1 ps (peak-peak) in the non-retiming mode or 79.3 ps (peak-peak) in the retiming mode for the uplink channel and meets the requirements of lpGBT. The total power consumption of all uplink channels is 87.0 mW in the non-retiming mode and 101.4 mW in the retiming mode, below the specification of 174 mW. The two downlink channels consume less than 53 mW. A quality control test procedure is proposed and 169 prototype chips are tested. The yield is about 97.0%. △ Less

Submitted 6 August, 2021; originally announced August 2021.

Comments: 14 pages, 18 figures

Characterization of the CMS Endcap Timing Layer readout chip prototype with charge injection

Authors: H. Sun, D. Gong, W. Zhang, C. Edwards, c G. Huang, X. Huang, C. Liu, T. Liu, T. Liu, J. Olsen, Q. Sun, J. Wu, J. Ye, L. Zhang

Abstract: We present the characterization of a readout Application-Specific Integrated Circuit (ASIC) for the CMS Endcap Timing Layer (ETL) of the High-Luminosity LHC upgrade with charge injection. The ASIC, named ETROC and developed in a 65 nm CMOS technology, reads out a 16x16 pixel matrix of the Low-Gain Avalanche Detector (LGAD). The jitter contribution from ETROC is required to be below 40 ps to achiev… ▽ More We present the characterization of a readout Application-Specific Integrated Circuit (ASIC) for the CMS Endcap Timing Layer (ETL) of the High-Luminosity LHC upgrade with charge injection. The ASIC, named ETROC and developed in a 65 nm CMOS technology, reads out a 16x16 pixel matrix of the Low-Gain Avalanche Detector (LGAD). The jitter contribution from ETROC is required to be below 40 ps to achieve the 50 ps overall time resolution per hit. The analog readout circuits in ETROC consist of the preamplifier and the discriminator. The preamplifier handles the LGAD charge signal with the most probable value of around 15 fC. The discriminator generates the digital pulse, which provides the Time-Of-Arrival (TOA, leading edge) and Time-Over-Threshold (TOT, pulse width) information. The prototype of ETROC (ETROC0) that implements a single channel of analog readout circuits has been evaluated with charge injection. The jitter of the analog readout circuits, measured from the discriminator's leading edge, is better than 16 ps for a charge larger than 15 fC with the sensor capacitance. The time walk resulting from different pulse heights can be corrected using the TOT measurement. The time resolution distribution has a standard deviation of 29 ps after the time-walk correction from the charge injection. At room temperature, the preamplifier's power consumption is measured to be 0.74 mW and 1.53 mW per pixel in the low- and high-power mode, respectively. The measured power consumption of the discriminator is 0.84 mW per pixel. With the ASIC alone or the LGAD sensor, The characterization performances fulfill the ETL's challenging requirements. △ Less

Submitted 2 September, 2021; v1 submitted 31 May, 2021; originally announced June 2021.

Comments: 15 pages, 10 figures

Journal ref: 2021 JINST 16 P06038

The Analog Front-end for the LGAD Based Precision Timing Application in CMS ETL

Authors: Quan Sun, Sunil M. Dogra, Christopher Edwards, Datao Gong, Lindsey Gray, Xing Huang, Siddhartha Joshi, Jongho Lee, Chonghan Liu, Tiehui Liu, Tiankuan Liu, Sergey Los, Chang-Seong Moon, Geonhee Oh, Jamieson Olsen, Luciano Ristori, Hanhan Sun, Xiao Wang, Jinyuan Wu, Jingbo Ye, Zhenyu Ye, Li Zhang, Wei Zhang

Abstract: The analog front-end for the Low Gain Avalanche Detector (LGAD) based precision timing application in the CMS Endcap Timing Layer (ETL) has been prototyped in a 65 nm CMOS mini-ASIC named ETROC0. Serving as the very first prototype of ETL readout chip (ETROC), ETROC0 aims to study and demonstrate the performance of the analog frontend, with the goal to achieve 40 to 50 ps time resolution per hit w… ▽ More The analog front-end for the Low Gain Avalanche Detector (LGAD) based precision timing application in the CMS Endcap Timing Layer (ETL) has been prototyped in a 65 nm CMOS mini-ASIC named ETROC0. Serving as the very first prototype of ETL readout chip (ETROC), ETROC0 aims to study and demonstrate the performance of the analog frontend, with the goal to achieve 40 to 50 ps time resolution per hit with LGAD (therefore reach about 30ps per track with two detector-layer hits per track). ETROC0 consists of preamplifier and discriminator stages, which amplifies the LGAD signal and generates digital pulses containing time of arrival and time over threshold information. This paper will focus on the design considerations that lead to the ETROC front-end architecture choice, the key design features of the building blocks, the methodology of using the LGAD simulation data to evaluate and optimize the front-end design. The ETROC0 prototype chips have been extensively tested using charge injection and the measured performance agrees well with simulation. The initial beam test results are also presented, with time resolution of around 33 ps observed from the preamplifier waveform analysis and around 41 ps from the discriminator pulses analysis. A subset of ETROC0 chips have also been tested to a total ionizing dose of 100 MRad with X-ray and no performance degradation been observed. △ Less

Submitted 28 December, 2020; originally announced December 2020.

A Low-Power Time-to-Digital Converter for the CMS Endcap Timing Layer (ETL) Upgrade

Authors: Wei Zhang, Hanhan Sun, Christopher Edwards, Datao Gong, Xing Huang, Chonghan Liu, Tiankuan Liu, Tiehui Liu, Jamieson Olsen, Quan Sun, Xiangming Sun, Jinyuan Wu, Jingbo Ye, Li Zhang

Abstract: We present the design and test results of a Time-to-Digital-Converter (TDC). The TDC will be a part of the readout ASIC, called ETROC, to read out Low-Gain Avalanche Detectors (LGADs) for the CMS Endcap Timing Layer (ETL) of High-Luminosity LHC upgrade. One of the challenges of the ETROC design is that the TDC is required to consume less than 200 W for each pixel at the nominal hit occupancy of 1%… ▽ More We present the design and test results of a Time-to-Digital-Converter (TDC). The TDC will be a part of the readout ASIC, called ETROC, to read out Low-Gain Avalanche Detectors (LGADs) for the CMS Endcap Timing Layer (ETL) of High-Luminosity LHC upgrade. One of the challenges of the ETROC design is that the TDC is required to consume less than 200 W for each pixel at the nominal hit occupancy of 1%. To meet the low-power requirement, we use a single delay line for both the Time of Arrival (TOA) and the Time over Threshold (TOT) measurements without delay control. A double-strobe self-calibration scheme is used to compensate for process variation, temperature, and power supply voltage. The TDC is fabricated in a 65 nm CMOS technology. The overall performances of the TDC have been evaluated. The TOA has a bin size of 17.8 ps within its effective dynamic range of 11.6 ns. The effective measurement precision of the TOA is 5.6 ps and 9.9 ps with and without the nonlinearity correction, respectively. The TDC block consumes 97 W at the hit occupancy of 1%. Over a temperature range from 23 C to 78 C and a power supply voltage range from 1.05 V to 1.35 V (the nominal value of 1.20 V), the self-calibrated bin size of the TOA varies within 0.4%. The measured TDC performances meet the requirements except that more tests will be performed in the future to verify that the TDC complies with the radiation-tolerance specifications. △ Less

Submitted 31 October, 2020; originally announced November 2020.

Comments: 8 pages, 16 figures. 22nd IEEE Real Time Conference

A novel quad-channel 10 Gbps CMOS VCSEL array driver with integrated charge pumps

Authors: X. Huang, D. Gong, D. Guo, S. Hou, G. Huang, S. Kulis, C. Liu, T. Liu, P. Moreira, A. Sánchez Rodríguez, H. Sun, Q. Sun, J. Troska, L. Xiao, L. Zhang, W. Zhang, J. Ye

Abstract: We present a novel design and the test results of a 4-channel driver for an array of Vertical-Cavity Surface-Emitting Lasers (VCSELs). This ASIC, named cpVLAD and fabricated in a 65 nm CMOS technology, has on-chip charge pumps and is for data rates up to 10 Gbps per channel. The charge pumps are implemented to address the issue of voltage margin of the VCSEL driving stage in the applications under… ▽ More We present a novel design and the test results of a 4-channel driver for an array of Vertical-Cavity Surface-Emitting Lasers (VCSELs). This ASIC, named cpVLAD and fabricated in a 65 nm CMOS technology, has on-chip charge pumps and is for data rates up to 10 Gbps per channel. The charge pumps are implemented to address the issue of voltage margin of the VCSEL driving stage in the applications under low temperature and harsh radiation environment. Test results indicate that cpVLAD is capable of driving VCSELs with forward voltages of up to 2.8 V using 1.2 V and 2.5 V power supplies with a power consumption of 94 mW/channel. △ Less

Submitted 31 October, 2020; originally announced November 2020.

Comments: 15 pages, 20 figures

A 10 Gbps Driver/Receiver ASIC and Optical Modules for Particle Physics Experiments

Authors: Xing Huang, Datao Gong, Suen Hou, Guangming Huang, Chonghan Liu, Tiankuan Liu, Ming Qi, Hanhan Sun, Quan Sun, Li Zhang, Wei Zhang, Xiandong Zhao, Jingbo Ye

Abstract: We present the design and test results of a Drivers and Limiting AmplifierS ASIC operating at 10 Gbps (DLAS10) and three Miniature Optical Transmitter/Receiver/Transceiver modules (MTx+, MRx+, and MTRx+) based on DLAS10. DLAS10 can drive two Transmitter Optical Sub-Assemblies (TOSAs) of Vertical Cavity Surface Emitting Lasers (VCSELs), receive the signals from two Receiver Optical Sub-Assemblies (… ▽ More We present the design and test results of a Drivers and Limiting AmplifierS ASIC operating at 10 Gbps (DLAS10) and three Miniature Optical Transmitter/Receiver/Transceiver modules (MTx+, MRx+, and MTRx+) based on DLAS10. DLAS10 can drive two Transmitter Optical Sub-Assemblies (TOSAs) of Vertical Cavity Surface Emitting Lasers (VCSELs), receive the signals from two Receiver Optical Sub-Assemblies (ROSAs) that have no embedded limiting amplifiers, or drive a VCSEL TOSA and receive the signal from a ROSA, respectively. Each channel of DLAS10 consists of an input Continuous Time Linear Equalizer (CTLE), a four-stage limiting amplifier (LA), and an output driver. The LA amplifies the signals of variable levels to a stable swing. The output driver drives VCSELs or impedance-controlled traces. DLAS10 is fabricated in a 65 nm CMOS technology. The die is 1 mm x 1 mm. DLAS10 is packaged in a 4 mm x 4 mm 24-pin quad-flat no-leads (QFN) package. DLAS10 has been tested in MTx+, MRx+, and MTRx+ modules. Both measured optical and electrical eye diagrams pass the 10 Gbps eye mask test. The input electrical sensitivity is 40 mVp-p, while the input optical sensitivity is -12 dBm. The total jitter of MRx+ is 29 ps (P-P) with a random jitter of 1.6 ps (RMS) and a deterministic jitter of 9.9 ps. Each MTx+/MTRx+ module consumes 82 mW/ch and 174 mW/ch, respectively. △ Less

Submitted 30 October, 2020; originally announced October 2020.

Comments: 7 pages, 25 figures, 22nd Virtual IEEE Real Time Conference

A 20 Gbps Data Transmitting ASIC with PAM4 for Particle Physics Experiments

Authors: Li Zhang, Datao Gong, Suen Hou, Guanming Huang, Xing Huang, Chonghan Liu, Tiankuan Liu, Hanhan Sun, Quan Sun, Xiangming Sun, Wei Zhang, Jingbo Ye

Abstract: We present the design principle and test results of a data transmitting ASIC, GBS20, for particle physics experiments. The goal of GBS20 will be an ASIC that employs two serializers each from the 10.24 Gbps lpGBT SerDes, sharing the PLL also from lpGBT. A PAM4 encoder plus a VCSEL driver will be implemented in the same die to use the same clock system, eliminating the need of CDRs in the PAM4 enco… ▽ More We present the design principle and test results of a data transmitting ASIC, GBS20, for particle physics experiments. The goal of GBS20 will be an ASIC that employs two serializers each from the 10.24 Gbps lpGBT SerDes, sharing the PLL also from lpGBT. A PAM4 encoder plus a VCSEL driver will be implemented in the same die to use the same clock system, eliminating the need of CDRs in the PAM4 encoder. This way the transmitter module, GBT20, developed using the GBS20 ASIC, will have the exact lpGBT data interface and transmission protocol, with an output up to 20.48 Gbps over one fiber. With PAM4 embedded FPGAs at the receiving end, GBT20 will halve the fibers needed in a system and better use the input bandwidth of the FPGA. A prototype, GBS20v0 is fabricated using a commercial 65 nm CMOS technology. This prototype has two serializers and a PAM4 encoder sharing the lpGBT PLL, but no user data input. An internal PRBS generator provides data to the serializers. GBS20v0 is tested barely up to 20.48 Gbps. With lessons learned from this prototype, we are designing the second prototype, GBS20v1, that will have 16 user data input channels each at 1.28 Gbps. We present the design concept of the GBS20 ASIC and the GBT20 module, the preliminary test results, and lessons learned from GBS20v0 and the design of GBS20v1 which will be not only a test chip but also a user chip with 16 input data channels. △ Less

Submitted 30 October, 2020; originally announced October 2020.

Comments: 3 pages, 3 figures,22nd IEEE Real Time Conference

Optical transceivers for event triggers in the ATLAS phase-I upgrade

Authors: L. Zhang, C. Chen, I. Cohen, E. Cruda, D. Gong, S. Hou, X. Hu, X. Huang, J. -H. Li, C. Liu, T. Liu, L. Murphy, T. Schwarz, H. Sun, X. Sun, J. Thomas, Z. Wang, J. Ye, W. Zhang

Abstract: The ATLAS phase-I upgrade aims to enhance event trigger performance in the Liquid Argon (LAr) calorimeter and the forward muon spectrometer. The trigger signals are transmitted by optical transceivers at 5.12 Gbps per channel in a radiation field. We report the design, quality control in production and ageing test of the transceivers fabricated with the LOCld laser driver and multi-mode 850 nm ver… ▽ More The ATLAS phase-I upgrade aims to enhance event trigger performance in the Liquid Argon (LAr) calorimeter and the forward muon spectrometer. The trigger signals are transmitted by optical transceivers at 5.12 Gbps per channel in a radiation field. We report the design, quality control in production and ageing test of the transceivers fabricated with the LOCld laser driver and multi-mode 850 nm vertical-cavity surface-emitting laser (VCSEL). The modules are packaged in miniature formats of dual-channel transmitter (MTx) and transceiver (MTRx) for the LAr. The transmitters are also packaged in small form-factor pluggable (SFP) for the muon spectrometer. In production, the LOCld chips and VCSELs in TOSA package were examined before assembly. All of the modules were tested and selected during production for quality control based on the eye-diagram parameters measured at 5.12 Gbps. The yield is 98 % for both the MTx and MTRx on a total 4.7k modules. The uniformity of transmitter channels of a MTx was assured by choosing the TOSA components with approximately equal light powers. The ageing effect is monitored in burn-in of a small batch of transmitter modules with bit-error test and eye-diagrams measured periodically. The observables are stable with the light power degradation within 5 % over a period of more than 6k hours. △ Less

Submitted 25 September, 2020; originally announced September 2020.

Comments: 6 pages, 10 figures

LOCx2, a Low-latency, Low-overhead, 2 x 5.12-Gbps Transmitter ASIC for the ATLAS Liquid Argon Calorimeter Trigger Upgrade

Authors: Le Xiao, Xiaoting Li, Datao Gong, Jinghong Chen, Di Guo, Huiqin He, Suen Hou, Guangming Huang, Chonghan Liu, Tiankuan Liu, Xiangming Sun, Ping-Kun Teng, Bozorgmehr Vosooghi, Annie C. Xiang, Jingbo Ye, Yang You, Zhiheng Zuo

Abstract: In this paper, we present the design and test results of LOCx2, a transmitter ASIC for the ATLAS Liquid Argon Calorimeter trigger upgrade. LOCx2 consists of two channels and each channel encodes ADC data with an overhead of 14.3% and transmits serial data at 5.12 Gbps with a latency of less than 27.2 ns. LOCx2 is fabricated with a commercial 0.25-um Silicon-on-Sapphire CMOS technology and is packa… ▽ More In this paper, we present the design and test results of LOCx2, a transmitter ASIC for the ATLAS Liquid Argon Calorimeter trigger upgrade. LOCx2 consists of two channels and each channel encodes ADC data with an overhead of 14.3% and transmits serial data at 5.12 Gbps with a latency of less than 27.2 ns. LOCx2 is fabricated with a commercial 0.25-um Silicon-on-Sapphire CMOS technology and is packaged in a 100-pin QFN package. The power consumption of LOCx2 is about 843 mW. △ Less

Submitted 18 September, 2020; originally announced September 2020.

The Clock and Control System for the ATLAS Liquid Argon Calorimeter Phase-I Upgrade

Authors: Le Xiao, Chonghan Liu, Tiankuan Liu, Hucheng Chen, Jinghong Chen, Kai Chen, Yulang Feng, Datao Gong, Di Guo, Huiqin He, Suen Hou, Guangming Huang, Xiangming Sun, Yuxuan Tang, Ping-Kun Teng, Annie C. Xiang, Hao Xu, Jingbo Ye, Yang You

Abstract: A Liquid-argon Trigger Digitizer Board (LTDB) is being developed to upgrade the ATLAS Liquid Argon Calorimeter Phase-I trigger electronics. The LTDB located at the front end needs to obtain the clock signals and be configured and monitored remotely from the back end. A clock and control system is being developed for the LTDB and the major functions of the system have been evaluated. The design and… ▽ More A Liquid-argon Trigger Digitizer Board (LTDB) is being developed to upgrade the ATLAS Liquid Argon Calorimeter Phase-I trigger electronics. The LTDB located at the front end needs to obtain the clock signals and be configured and monitored remotely from the back end. A clock and control system is being developed for the LTDB and the major functions of the system have been evaluated. The design and evaluation of the clock and control system are presented in this paper. △ Less

Submitted 18 September, 2020; originally announced September 2020.

Mid-board miniature dual channel optical transmitter MTx and transceiver MTRx

Authors: Xiandong Zhao, Chonghan Liu, Datao Gong, Jinghong Chen, Di Guo, Huiqin He, Suen Hou, Guangming Huang, Xiaoting Li, Tiankun Liu, Xiangming Sun, Ping-Kun Teng, Le Xiao, Annie C. Xiang, Jingbo Ye

Abstract: We report the development of a mid-board, TOSA and ROSA based miniature dual channel optical transmitter (MTx) and a transceiver (MTRx). The design transmission data rate is 5.12 Gbps per channel and receiving data rate 4.8 Gbps. MTx and MTRx are only 6 mm tall and are electrically and optically pluggable. Although the fiber TOSA/ROSA coupling is through a custom latch, the fiber uses the standard… ▽ More We report the development of a mid-board, TOSA and ROSA based miniature dual channel optical transmitter (MTx) and a transceiver (MTRx). The design transmission data rate is 5.12 Gbps per channel and receiving data rate 4.8 Gbps. MTx and MTRx are only 6 mm tall and are electrically and optically pluggable. Although the fiber TOSA/ROSA coupling is through a custom latch, the fiber uses the standard LC ferrule, flange and spring. Light coupling is ensured by the TOSA and ROSA with the LC coupling mechanism. With the dual channel serializer LOCx2 sits under MTx, one achieves high data transmission with a small PCB footprint, and enjoys the reliability of the hermetically packaged TOSA. MTx and MTRx are designed for detector front-end readout of the ATLAS Liquid Argon Calorimeter (LAr) trigger upgrade. △ Less

Submitted 18 September, 2020; originally announced September 2020.